HUAWEI-QOS-MIB
AI MIB Summary
The HUAWEI-QOS-MIB enables management of Quality of Service parameters on Huawei network devices, specifically monitoring and configuring queue scheduling algorithms, traffic rate limiting, and rate mirroring policies.
The mib is used for configuring QoS such as queue scheduling rate limiting, rate mirroring and so on.
Main OID:
hwLswQosAclMib.1.3.6.1.4.1.2011.5.2
154
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
154 total| Object Name |
|---|
hwLswQosAclMibThe mib is used for configuring QoS such as queue scheduling
rate limiting, rate mirroring and so on. MODULE-IDENTITY .1.3.6.1.4.1.2011.5.2 |
hwQueueTableIndicates the queue scheduling feature, there is only one item.
The index of this table is hwQueuePortIfIndex. SEQUENCE OF HwQueueEntry .1.3.6.1.4.1.2011.5.2.2 |
hwQueueEntryIndicates the queue scheduling feature, there is only one item.
The index of this entry is hwQueuePortIfIndex. HwQueueEntry .1.3.6.1.4.1.2011.5.2.2.1 |
hwQueuePortIfIndexThe index of the table, it is used to configure the interface index for queue scheduling.
Range: 1-255
0 indicates global.ro Integer32 .1.3.6.1.4.1.2011.5.2.2.1.1 |
hwQueueScheduleModeThe flag indicates the queue scheduling mode.
Options:
1. sp(1) -indicates the strict priority queue scheduling mode
2. wrr(2) -indicates the weighted round robin mode
3. wfq(8) -indicates the weighted fair queuing moderw Enumeration .1.3.6.1.4.1.2011.5.2.2.1.2 |
hwQueueWeight1In the WRR mode, it indicates the weight of queue 1; 0 indicates an invalid value.
In the WFQ mode, it indicates the minimum bandwidth quota of queue 1.rw Integer32 .1.3.6.1.4.1.2011.5.2.2.1.3 |
hwQueueWeight2In the WRR mode, it indicates the weight of queue 2; 0 indicates an invalid value.
In the WFQ mode, it indicates the minimum bandwidth quota of queue 2.rw Integer32 .1.3.6.1.4.1.2011.5.2.2.1.4 |
hwQueueWeight3In the WRR mode, it indicates the weight of queue 3; 0 indicates an invalid value.
In the WFQ mode, it indicates the minimum bandwidth quota of queue 3.rw Integer32 .1.3.6.1.4.1.2011.5.2.2.1.5 |
hwQueueWeight4In the WRR mode, it indicates the weight of queue 4; 0 indicates an invalid value.
In the WFQ mode, it indicates the minimum bandwidth quota of queue 4.rw Integer32 .1.3.6.1.4.1.2011.5.2.2.1.6 |
hwQueueWeight5In the WRR mode, it indicates the weight of queue 5; 0 indicates an invalid value.
In the WFQ mode, it indicates the minimum bandwidth quota of queue 5.rw Integer32 .1.3.6.1.4.1.2011.5.2.2.1.7 |
hwQueueWeight6In the WRR mode, it indicates the weight of queue 6; 0 indicates an invalid value.
In the WFQ mode, it indicates the minimum bandwidth quota of queue 6.rw Integer32 .1.3.6.1.4.1.2011.5.2.2.1.8 |
hwQueueWeight7In the WRR mode, it indicates the weight of queue 7; 0 indicates an invalid value.
In the WFQ mode, it indicates the minimum bandwidth quota of queue 7.rw Integer32 .1.3.6.1.4.1.2011.5.2.2.1.9 |
hwQueueWeight8In the WRR mode, it indicates the weight of queue 8; 0 indicates an invalid value.
In the WFQ mode, it indicates the minimum bandwidth quota of queue 8.rw Integer32 .1.3.6.1.4.1.2011.5.2.2.1.10 |
hwWFQMaxWeight1Maximum bandwidth quota of queue 1rw Integer32 .1.3.6.1.4.1.2011.5.2.2.1.11 |
hwWFQMaxWeight2Maximum bandwidth quota of queue 2rw Integer32 .1.3.6.1.4.1.2011.5.2.2.1.12 |
hwWFQMaxWeight3Maximum bandwidth quota of queue 3rw Integer32 .1.3.6.1.4.1.2011.5.2.2.1.13 |
hwWFQMaxWeight4Maximum bandwidth quota of queue 4rw Integer32 .1.3.6.1.4.1.2011.5.2.2.1.14 |
hwWFQMaxWeight5Maximum bandwidth quota of queue 5rw Integer32 .1.3.6.1.4.1.2011.5.2.2.1.15 |
hwWFQMaxWeight6Maximum bandwidth quota of queue 6rw Integer32 .1.3.6.1.4.1.2011.5.2.2.1.16 |
hwWFQMaxWeight7Maximum bandwidth quota of queue 7rw Integer32 .1.3.6.1.4.1.2011.5.2.2.1.17 |
hwWFQMaxWeight8Maximum bandwidth quota of queue 8rw Integer32 .1.3.6.1.4.1.2011.5.2.2.1.18 |
hwQueueMaxDelayMaximum delay.
0 indicates an invalid value, invalid in current version.ro Integer32 .1.3.6.1.4.1.2011.5.2.2.1.19 |
hwRateLimitTableDescribes the traffic limitation on packets that are received by a specified port or a specified slot and that match the ACL rule.
The indexes of this table are hwRateLimitAclIndex, hwRateLimitIfIndex, and hwRateLimitDirection.
Make sure that the ACL rule in hwRateLimitTable is already created in hwAclBasicRuleTable, hwAclAdvancedRuleTable,
hwAclLinkTable, or hwAclUserTable. SEQUENCE OF HwRateLimitEntry .1.3.6.1.4.1.2011.5.2.3 |
hwRateLimitEntryDescribes the traffic limitation on packets that are received by a specified port or a specified slot and that match the ACL rule.
The indexes of this entry are hwRateLimitAclIndex, hwRateLimitIfIndex, and hwRateLimitDirection.
Make sure that the ACL rule in hwRateLimitTable is already created in hwAclBasicRuleTable, hwAclAdvancedRuleTable,
hwAclLinkTable, or hwAclUserTable. HwRateLimitEntry .1.3.6.1.4.1.2011.5.2.3.1 |
hwRateLimitAclIndexThe delivery entry index of an ACL rule used for traffic limitation is a delivery record entry index used by software,
which is meaningless to users. The index is used in hwRateLimitTable to search the delivery entries fast.
Range: 0-2999
In the create operation, the device automatically allocates a delivery entry index.
There is a suggestion that users can always input 0.ro Integer32 .1.3.6.1.4.1.2011.5.2.3.1.1 |
hwRateLimitIfIndexSpecifies the index of a port or a slot for traffic limitation.
It uniquely identifies a port or a slot.
The value and algorithm are the same as those of ifIndex.
If the configuration based on a slot, the bits map is shown as follows:
| 31-25 bits | 24-19 bits | 18-13 bits | 12-6 bits | 5-0 bits is reserved |
| indicate iftype | indicate frame ID | indicate slot ID | indicate port ID | |
| the value of iftype | frame ID | slot ID | the value of port ID | the reserved value |
| is always 0x68 | | | is always 0 | is always 0 |
Range: 0-4294967295ro Unsigned32 (0|1..4294967295) .1.3.6.1.4.1.2011.5.2.3.1.2 |
hwRateLimitDirectionIndicates the direction where an ACL rule used for traffic limitation takes effect.
Currently, only the inbound direction is supported.
Options:
1. invalid(0) -indicates an invalid parameter
2. inbound(1) -indicates the inbound direction of a port or a slot
3. outbound(2) -indicates the outbound direction of a port or a slotro Enumeration .1.3.6.1.4.1.2011.5.2.3.1.3 |
hwRateLimitUserAclNumDescribes the user-defined ACL rule group that is used when
a user-defined ACL rule for traffic limitation is delivered to a specified port or a specified slot.
Range: 0, 5000-5999
Make sure that the user-defined ACL rule group is already created.
In the query operation, if the user-defined ACL rule group is not used, the value obtained is 0.rw Integer32 (0 | 5000..5999) .1.3.6.1.4.1.2011.5.2.3.1.4 |
hwRateLimitUserAclSubitemDescribes the user-defined ACL rule that is used when a user-defined ACL rule for traffic limitation is delivered to a specified port or a specified slot.
This leaf must be used together with hwRateLimitUserAclNum, uniquely identifying an ACL rule.
Range: 0-4294967295
Make sure that the user-defined ACL rule is already created.
In the query operation, if the user-defined ACL rule is not used, the value obtained is 4294967295.rw Unsigned32 (0|1..4294967295) .1.3.6.1.4.1.2011.5.2.3.1.5 |
hwRateLimitIpAclNumDescribes the basic or advanced ACL rule group that is used when
a basic or advanced ACL rule for traffic limitation is delivered to a specified port or a specified slot.
Range: 0, 2000-3999
Make sure that the basic or advanced ACL rule group is already created.
In the query operation, if the basic or advanced ACL rule group is not used, the value obtained is 0.rw Integer32 (0 | 2000..3999) .1.3.6.1.4.1.2011.5.2.3.1.6 |
hwRateLimitIpAclSubitemDescribes the basic or advanced ACL rule that is used when a basic or advanced ACL rule
for traffic limitation is delivered to a specified port or a specified slot.
This leaf must be used together with hwRateLimitIpAclNum, uniquely identifying an ACL rule.
Range: 0-4294967295
Make sure that the basic or advanced ACL rule is already created.
In the query operation, if the basic or advanced ACL rule is not used, the value obtained is 4294967295.rw Unsigned32 (0|1..4294967295) .1.3.6.1.4.1.2011.5.2.3.1.7 |
hwRateLimitLinkAclNumDescribes the L2 ACL rule group that is used when an L2 ACL rule for traffic limitation is delivered to a specified port or a specified slot.
Range: 0, 4000-4999
Make sure that the L2 ACL rule group is already created.
In the query operation, if the L2 ACL rule group is not used, the value obtained is 0.rw Integer32 (0 | 4000..4999) .1.3.6.1.4.1.2011.5.2.3.1.8 |
hwRateLimitLinkAclSubitemDescribes the L2 ACL rule that is used when an L2 ACL rule for traffic limitation is delivered to a specified port or a specified slot.
This leaf must be used together with hwRateLimitLinkAclNum, uniquely identifying an ACL rule.
Range: 0-4294967295
Make sure that the L2 ACL rule is already created.
In the query operation, if the L2 ACL rule is not used, the value obtained is 4294967295.rw Unsigned32 ( 0|1..4294967295) .1.3.6.1.4.1.2011.5.2.3.1.9 |
hwRateLimitTargetRateIndicates the target value of traffic limitation on a port or a specified slot.
Range: 64-10000000 (which must be an integer multiple of 64)
Unit: Kbit/s.
0 indicates an invalid value.rw Integer32 (0|64..10000000) .1.3.6.1.4.1.2011.5.2.3.1.10 |
hwRateLimitExceedDropIndicates the action when traffic exceeds the target value.
Options:
1.true(1) -discard
2.false(2) -not discard
If this leaf is not specified, the default value is true(1).
In the set operation, if false(2) is entered, must input valid value of hwRateLimitExceedDscp,
otherwise the default value is true(1) will take effect.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.2.3.1.11 |
hwRateLimitExceedDscpDescribes the specified DSCP priority when configuring the DSCP priority of the
packets that match the ACL rule. The larger the DSCP value is, the higher the priority is.
Range: 0-63, 255
In the query operation, if this parameter is not used, the obtained value is 255, which indicates invalidity.
The number in the brackets is the DSCP value.
The names and meanings of the DSCP names are as follows:
af1: service of Assured Forwarding 1 (10)
af2: service of Assured Forwarding 2 (18)
af3: service of Assured Forwarding 3 (26)
af4: service of Assured Forwarding 4 (34)
be: Best Effort service (0)
cs1: service of Class Selector 1 (8)
cs2: service of Class Selector 2 (16)
cs3: service of Class Selector 3 (24)
cs4: service of Class Selector 4 (32)
cs5: service of Class Selector 5 (40)
cs6: service of Class Selector 6 (48)
cs7: service of Class Selector 7 (56)
ef: Expedited Forwarding service (46)rw Integer32 (0..63 | 255) .1.3.6.1.4.1.2011.5.2.3.1.12 |
hwRateLimitRuntimeDescribes whether the ACL rule for traffic limitation delivered to a specified port or a specified slot takes effect.
This leaf is read-only.
Options:
1. true(1) -if the ACL rule is associated with a time range parameter
and the current time is within the defined time range, the value is true(1),
which indicates validity.
2. false(2) -if the current time is not within the defined time range, the value is false(2),
which indicates invalidity.
If the ACL rule is not associated with a time range parameter, the value is always true(1).ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.2.3.1.13 |
hwRateLimitRowStatusIndicates the row status.
It is used for delivering an ACL rule for traffic limitation to a specified port or a specified slot and
deleting the delivered ACL rule on a port or a specified slot.
Options:
1. active(1) -when this leaf is queried, the value is fixed to active(1).
2. createAndGo(4) -deliver an ACL rule for traffic limitation to a specified port or a specified slot
3. destroy(6) -delete an ACL rule delivered to a port or a slot
When an ACL rule is delivered to a specified port or a specified slot, make sure that at least one of the
following groups is configured.
(1) hwRateLimitUserAclNum and hwRateLimitUserAclSubitem
(2) hwRateLimitIpAclNum and hwRateLimitIpAclSubitem
(3) hwRateLimitLinkAclNum and hwRateLimitLinkAclSubitem
In addition to independent configuration of each group, the combined configuration of
group (2) and (3) is permitted. The combined configuration of group (1) and (2) or
combining group (1) and (3) is prohibited. In addition, hwRateLimitRowStatus must be
set to createAndGo(4).
To delete the ACL rule delivered to a port or a slot, set hwRateLimitRowStatus to destroy(6).
When this leaf is queried, the value is fixed to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.2.3.1.14 |
hwRateLimitCirIndicates the Committed information rate for rate limiting.
Value Rage: 0, 64-10240000.
0 indicates an invalid value.
unit: Kbit/srw Integer32 (0|64..10240000) .1.3.6.1.4.1.2011.5.2.3.1.15 |
hwRateLimitCbsIndicates the Committed burst size for rate limiting.
Value Rage: 0, 2000-10240000.
If not set, the value is min(2000+hwRateLimitCir*321024000).
0 indicates an invalid value.
unit: byterw Integer32 (0|2000..10240000) .1.3.6.1.4.1.2011.5.2.3.1.16 |
hwRateLimitPirIndicates the Peak information rate for rate limiting.
If not set, the value is min(hwRateLimitCir*210240000).
PIR must not be less than CIR.
Value Rage: 0, 64-10240000.
0 indicates an invalid value.
unit: Kbit/srw Integer32 (0|64..10240000) .1.3.6.1.4.1.2011.5.2.3.1.17 |
hwRateLimitPbsIndicates the Committed information rate for rate limiting.
If not set, the value is min(2000+hwRateLimitPir*321024000).
Value Rage: 0, 2000-10240000.
0 indicates an invalid value.
unit: byterw Integer32 (0|2000..10240000) .1.3.6.1.4.1.2011.5.2.3.1.18 |
hwRateLimitIpv6AclNumIndicates the basic or advanced ACLv6 rule group that is used when
a basic or advanced ACLv6 rule for traffic limitation is delivered to a specified port or a specified slot.
Range: 0, 2000-3999
Make sure that the basic or advanced ACLv6 rule group is already created.
In the query operation, if the basic or advanced ACLv6 rule group is not used, the value obtained is 0.rw Integer32 (0|2000..3999) .1.3.6.1.4.1.2011.5.2.3.1.19 |
hwRateLimitIpv6AclSubitemIndicates the basic or advanced ACLv6 rule that is used when a basic or advanced ACLv6 rule
for traffic limitation is delivered to a specified port or a specified slot.
This leaf must be used together with hwRateLimitIpv6AclNum, uniquely identifying an ACLv6 rule.
Range: 0-4294967295
Make sure that the basic or advanced ACLv6 rule is already created.
In the query operation, if the basic or advanced ACLv6 rule is not used, the value obtained is 4294967295.rw Unsigned32 .1.3.6.1.4.1.2011.5.2.3.1.20 |
hwRateLimitRedDropIndicates the action when traffic is marked to red.
TRUE(1): discard the packets.
FALSE(2): don't discard the packetsrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.2.3.1.21 |
hwRateLimitRedRemarkDscpIndicates the new DSCP value that is preset when the preset traffic is marked to red.
-1 indicates an invalid valuerw Integer32 (-1|0..63) .1.3.6.1.4.1.2011.5.2.3.1.22 |
hwRateLimitYellowDropIndicates the action when traffic is marked to yellow.
TRUE(1): discard the packets.
FALSE(2): don't discard the packetsrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.2.3.1.23 |
hwRateLimitYellowRemarkDscpIndicates the new DSCP value that is preset when the preset traffic is marked to yellow.
-1 indicates an invalid valuerw Integer32 (-1|0..63) .1.3.6.1.4.1.2011.5.2.3.1.24 |
hwPriorityTableDescribes the priority marking for packets that match the ACL rule on a specified port or a specified slot.
The indexes of this table are hwPriorityAclIndex, hwPriorityIfIndex and hwPriorityDirection.
Make sure that the ACL rule in hwPriorityTable is already created in hwAclBasicRuleTable,
hwAclAdvancedRuleTable, hwAclLinkTable, or hwAclUserTable. SEQUENCE OF HwPriorityEntry .1.3.6.1.4.1.2011.5.2.4 |
hwPriorityEntryDescribes the priority marking for packets that match the ACL rule on a specified port or a specified slot.
The indexes of this entry are hwPriorityAclIndex, hwPriorityIfIndex and hwPriorityDirection.
Make sure that the ACL rule in hwPriorityTable is already created in hwAclBasicRuleTable,
hwAclAdvancedRuleTable, hwAclLinkTable, or hwAclUserTable. HwPriorityEntry .1.3.6.1.4.1.2011.5.2.4.1 |
hwPriorityAclIndexIndicates the delivery entry index of an ACL rule for priority marking.
It is a delivery record entry index used by software, which is meaningless to users.
The index is used in hwPriorityTable to search the delivery entries fast.
Range: 0-2999
In the create operation, the device automatically allocates a delivery entry index.
There is a suggestion that users can always input 0.ro Integer32 .1.3.6.1.4.1.2011.5.2.4.1.1 |
hwPriorityIfIndexIndicates the port index or the slot index when the device delivers an ACL rule for priority marking to a specified port or a specified slot.
The index uniquely identifies a port or a slot. The value and algorithm are the same as those of ifIndex.
If the configuration based on a slot, the bits map is shown as follows:
| 31-25 bits | 24-19 bits | 18-13 bits | 12-6 bits | 5-0 bits is reserved |
| indicate iftype | indicate frame ID | indicate slot ID | indicate port ID | |
| the value of iftype | frame ID | slot ID | the value of port ID | the reserved value |
| is always 0x68 | | | is always 0 | is always 0 |
Range: 0-4294967295ro Unsigned32 (0|1..4294967295) .1.3.6.1.4.1.2011.5.2.4.1.2 |
hwPriorityDirectionIndicates the direction where an ALC rule for priority marking
takes effect when the device delivers an ACL rule to a specified port or a specified slot.
Options:
1. invalid(0) -indicates an invalid parameter.
2. inbound(1) -indicates the inbound direction of a port or a slot.
It is used to configure the priority for the packets
that are received on a specified port or a slot.
3. outbound(2) -indicates the outbound direction of a port or a slot.
It is used to configure the priority for the packets
that are transmitted on a specified port or a slot.ro Enumeration .1.3.6.1.4.1.2011.5.2.4.1.3 |
hwPriorityUserAclNumDescribes the user-defined ACL rule group that is used when a user-defined
ACL rule for priority marking is delivered to a specified port or a specified slot.
Range: 0, 5000-5999
Make sure that the user-defined ACL rule group is already created.
In the query operation, if the user-defined ACL rule group is not used,
the value obtained is 0.rw Integer32 (0 | 5000..5999) .1.3.6.1.4.1.2011.5.2.4.1.4 |
hwPriorityUserAclSubitemDescribes the user-defined ACL rule that is used when a user-defined
ACL rule for priority marking is delivered to a specified port or a specified slot.
This leaf must be used together with hwPriorityUserAclNum,
uniquely identifying an ACL rule
Range: 0-4294967295
Make sure that the user-defined ACL rule is already created.
In the query operation, if the user-defined ACL rule is not used,
the value obtained is 4294967295.rw Unsigned32 (0|1..4294967295) .1.3.6.1.4.1.2011.5.2.4.1.5 |
hwPriorityIpAclNumDescribes the basic or advanced ACL rule group that is used when a basic or
advanced ACL rule for priority marking is delivered to a specified port or a specified slot.
Range: 0, 2000-3999
Make sure that the basic or advanced ACL rule group is already created.
In the query operation, if the basic or advanced ACL rule group is not used,
the value obtained is 0.rw Integer32 (0 | 2000..3999) .1.3.6.1.4.1.2011.5.2.4.1.6 |
hwPriorityIpAclSubitemDescribes the basic or advanced ACL rule that is used when a basic or advanced
ACL rule for priority marking is delivered to a specified port or a specified slot.
This leaf must be used together with hwPriorityIpAclNum,
uniquely identifying an ACL rule.
Range: 0-4294967295
Make sure that the basic or advanced ACL rule group is already created.
In the query operation, if the basic or advanced ACL rule is not used,
the value obtained is 4294967295.rw Unsigned32 (0|1..4294967295) .1.3.6.1.4.1.2011.5.2.4.1.7 |
hwPriorityLinkAclNumDescribes the L2 ACL rule group that is used when an L2 ACL rule for
priority marking is delivered to a specified port or a specified slot.
Range: 0, 4000-4999
Make sure that the L2 ACL rule group is already created.
In the query operation, if the L2 ACL rule group is not used,
the value obtained is 0.rw Integer32 (0 | 4000..4999) .1.3.6.1.4.1.2011.5.2.4.1.8 |
hwPriorityLinkAclSubitemDescribes the L2 ACL rule that is used when an L2 ACL rule for priority
marking is delivered to a specified port or a specified slot.
This leaf must be used together with hwPriorityLinkAclNum,
uniquely identifying an ACL rule.
Range: 0-4294967295
Make sure that the L2 ACL rule is already created.
In the query operation, if the L2 ACL rule is not used,
the value obtained is 4294967295.rw Unsigned32 (0|1..4294967295) .1.3.6.1.4.1.2011.5.2.4.1.9 |
hwPriorityDscpDescribes the specified DSCP priority when configuring the DSCP priority for
the packets that match the ACL rule for priority marking.
The larger the DSCP value is, the higher the priority is.
Range: 0-63, 255
In the query operation, if this parameter is not used,
the obtained value is 255, which indicates invalidity.
The number in the brackets is the DSCP value.
The names and meanings of the DSCP names are as follows:
af1: service of Assured Forwarding 1 (10)
af2: service of Assured Forwarding 2 (18)
af3: service of Assured Forwarding 3 (26)
af4: service of Assured Forwarding 4 (34)
be: Best Effort service (0)
cs1: service of Class Selector 1 (8)
cs2: service of Class Selector 2 (16)
cs3: service of Class Selector 3 (24)
cs4: service of Class Selector 4 (32)
cs5 service of Class Selector 5 (40)
cs6: service of Class Selector 6 (48)
cs7: service of Class Selector 7 (56)
ef: Expedited Forwarding service (46)rw Integer32 (0..63 | 255) .1.3.6.1.4.1.2011.5.2.4.1.10 |
hwPriorityIpPreValueDescribes the specified IP precedence when configuring the IP precedence
for the packets that match the ACL rule for precedence marking.
Range: 0-7, 255
The larger the value is, the higher the precedence is.
In the query operation, if this parameter is not used,
the obtained value is 255, which indicates invalidity.
Meanings:
routine: Routine precedence (0)
priority: Priority precedence (1)
immediate: Immediate precedence (2)
flash: Flash precedence (3)
flash-override: Flash-override precedence (4)
critical: Critical precedence (5)
internet: Internetwork control precedence (6)
network: Network control precedence (7)rw Integer32 (0..7 | 255) .1.3.6.1.4.1.2011.5.2.4.1.11 |
hwPriorityIpPreFromCosIndicates whether to set the IP priority the same as the 802.1p priority,
that is, copy the 802.1p priority.
Options:
1. true(1) -copy
2. false(2) -not copy
If this leaf is not specified, the default value is false(2).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.2.4.1.12 |
hwPriorityCosValueDescribes the specified 802.1p priority when configuring the 802.1p priority
for the packets that match the ACL rule for priority marking.
Range: 0-7, 255
The larger the value is, the higher the priority is.
In the query operation, if this parameter is not used,
the obtained value is 255, which indicates invalidity.
Meanings:
best-effort: Best-effort priority (0)
background: Background priority (1)
spare: Spare priority (2).
excellent-effort: Excellent-effort priority (3)
controlled-load: Controlled-load priority (4)
video: Video priority (5)
voice: Voice priority (6)
network-management: Network-management priority (7)rw Integer32 (0..7 | 255) .1.3.6.1.4.1.2011.5.2.4.1.13 |
hwPriorityCosFromIpPreIndicates whether to set the IP priority the same as the 802.1p priority,
that is, copy the IP priority.
Options:
1. true(1) -copy
2. false(2) -not copy
If this leaf is not specified, the default value is false(2).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.2.4.1.14 |
hwPriorityLocalPreDescribes the specified local priority when configuring the local
priority for the packets that match the ACL rule for priority marking.
Range: 0-7, 255
The larger the value is, the higher the priority is.
In the query operation, if this parameter is not used,
the obtained value is 255, which indicates invalidity.rw Integer32 (0..7 | 255) .1.3.6.1.4.1.2011.5.2.4.1.15 |
hwPriorityRuntimeDescribes whether the ACL rule for priority marking
delivered to a specified port or a specified slot takes effect.
This leaf is read-only.
Options:
1. true(1) -if the ACL rule is associated with a time range parameter
and the current time is within the defined time range, the value is true(1),
which indicates validity.
2. false(2) -if the current time is not within the defined time range, the value is false(2),
which indicates invalidity.
If the ACL rule is not associated with a time range parameter, the value is always true(1).ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.2.4.1.16 |
hwPriorityRowStatusIndicates the row status. It is used for delivering an ACL rule for
priority marking to a specified port or a specified slot and deleting the delivered ACL rule on a port or a slot.
Options:
1. active(1) -when this leaf is queried, the value is fixed to active(1)
2. createAndGo(4) -deliver an ACL rule for priority marking to a specified port or a specified slot
3. destroy(6) -delete an ACL rule for priority marking delivered to a port or a specified slot
When an ACL rule is delivered to a specified port or a specified slot, make sure that at
least one of the following groups is configured.
(1)hwPriorityUserAclNum and hwPriorityUserAclSubitem
(2)hwPriorityIpAclNum and hwPriorityIpAclSubitem
(3)hwPriorityLinkAclNum and hwPriorityLinkAclSubitem
In addition to independent configuration of each group,
the combined configuration of group (2) and (3) is permitted.
The combined configuration of group (1) and (2) or combining group (1) and (3) is prohibited.
In addition, hwPriorityRowStatus must be set to createAndGo(4).
To delete the ACL rule for priority marking delivered to a port or a slot, set hwPriorityRowStatus to destroy(6).
When this leaf is queried, the value is fixed to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.2.4.1.17 |
hwPriorityIpv6AclNumIndicates the basic or advanced ACLv6 rule group that is used when a basic or
advanced ACLv6 rule for priority marking is delivered to a specified port or a specified slot.
Range: 0, 2000-3999
Make sure that the basic or advanced ACLv6 rule group is already created.
In the query operation, if the basic or advanced ACLv6 rule group is not used,
the value obtained is 0.rw Integer32 (0 | 2000..3999) .1.3.6.1.4.1.2011.5.2.4.1.18 |
hwPriorityIpv6AclSubitemIndicates the basic or advanced ACLv6 rule that is used when a basic or advanced
ACLv6 rule for priority marking is delivered to a specified port or a specified slot.
This leaf must be used together with hwPriorityIpv6AclNum,
uniquely identifying an ACLv6 rule.
Range: 0-4294967295
Make sure that the basic or advanced ACLv6 rule group is already created.
In the query operation, if the basic or advanced ACLv6 rule is not used,
the value obtained is 4294967295.rw Unsigned32 .1.3.6.1.4.1.2011.5.2.4.1.19 |
hwRedirectTableDescribes the redirection for packets that match the ACL rule from a port to another port.
The indexes of this table are hwRedirectAclIndex, hwRedirectIfIndex and hwRedirectDirection.
Make sure that the ACL rule in hwRedirectTable is already created in hwAclBasicRuleTable,
hwAclAdvancedRuleTable, hwAclLinkTable, or hwAclUserTable. SEQUENCE OF HwRedirectEntry .1.3.6.1.4.1.2011.5.2.5 |
hwRedirectEntryDescribes the redirection for packets that match the ACL rule from a port to another port.
The indexes of this entry are hwRedirectAclIndex, hwRedirectIfIndex and hwRedirectDirection.
Make sure that the ACL rule in hwRedirectTable is already created in hwAclBasicRuleTable,
hwAclAdvancedRuleTable, hwAclLinkTable, or hwAclUserTable. HwRedirectEntry .1.3.6.1.4.1.2011.5.2.5.1 |
hwRedirectAclIndexThe delivery entry index of an ACL rule for redirecting packets is a delivery
record entry index used by software, which is meaningless to users.
The index is used in hwRedirectTable to search the delivery entries fast.
Range: 0-2999
In the create operation, the device automatically allocates a delivery entry index.
There is a suggestion that users can always input 0.ro Integer32 .1.3.6.1.4.1.2011.5.2.5.1.1 |
hwRedirectIfIndexIndicates the port index when the device delivers an ACL rule for redirecting
packets to a specified port. The index uniquely identifies a port.
The value and algorithm are the same as those of ifIndex.
Range: 0-4294967295ro Unsigned32 (0|1..4294967295) .1.3.6.1.4.1.2011.5.2.5.1.2 |
hwRedirectDirectionIndicates the direction where an ACL rule for redirecting packets takes
effect when the device delivers an ACL rule to a specified port.
Options:
1. invalid(0) -indicates an invalid parameter.
2. inbound(1) -indicates the inbound direction of a port.
It is used for redirecting the packets received on a port.
3. outbound(2) -indicates the outbound direction of a port.
It is used for redirecting the packets transmitted on a port.ro Enumeration .1.3.6.1.4.1.2011.5.2.5.1.3 |
hwRedirectUserAclNumDescribes the user-defined ACL rule group that is used when a user-defined
ACL rule for redirecting packets is delivered to a specified port.
Range: 0, 5000-5999
Make sure that the user-defined ACL rule group is already created.
In the query operation, if the user-defined ACL rule group is not used,
the value obtained is 0.rw Integer32 (0 | 5000..5999) .1.3.6.1.4.1.2011.5.2.5.1.4 |
hwRedirectUserAclSubitemDescribes the user-defined ACL rule that is used when a user-defined
ACL rule for redirecting packets is delivered to a specified port.
This leaf must be used together with hwRedirectUserAclNum,
uniquely identifying an ACL rule.
Range: 0-4294967295
Make sure that the user-defined ACL rule is already created.
In the query operation, if the user-defined ACL rule is not used,
the value obtained is 4294967295.rw Unsigned32 (0|1..4294967295) .1.3.6.1.4.1.2011.5.2.5.1.5 |
hwRedirectIpAclNumDescribes the basic or advanced ACL rule group that is used when a basic
or advanced ACL rule for redirecting packets is delivered to a specified port.
Range: 0, 2000-3999
Make sure that the basic or advanced ACL rule group is already created.
In the query operation, if the basic or advanced ACL rule group is not used,
the value obtained is 0.rw Integer32 (0 | 2000..3999) .1.3.6.1.4.1.2011.5.2.5.1.6 |
hwRedirectIpAclSubitemDescribes the basic or advanced ACL rule that is used when a basic or advanced
ACL rule for redirecting packets is delivered to a specified port.
This leaf must be used together with hwRedirectIpAclNum,
uniquely identifying an ACL rule.
Range: 0-4294967295
Make sure that the basic or advanced ACL rule group is already created.
In the query operation, if the basic or advanced ACL rule is not used,
the value obtained is 4294967295.rw Unsigned32 (0|1..4294967295) .1.3.6.1.4.1.2011.5.2.5.1.7 |
hwRedirectLinkAclNumDescribes the L2 ACL rule group that is used when an L2 ACL rule
for redirecting packets is delivered to a specified port.
Range: 0, 4000-4999
Make sure that the L2 ACL rule group is already created.
In the query operation, if the L2 ACL rule group is not used,
the value obtained is 0.rw Integer32 (0 | 4000..4999) .1.3.6.1.4.1.2011.5.2.5.1.8 |
hwRedirectLinkAclSubitemDescribes the L2 ACL rule that is used when an L2 ACL rule for
redirecting packets is delivered to a specified port.
This leaf must be used together with hwRedirectLinkAclNum,
uniquely identifying an ACL rule.
Range: 0-4294967295
Make sure that the L2 ACL rule is already created.
In the query operation, if the L2 ACL rule is not used,
the value obtained is 4294967295.rw Unsigned32 .1.3.6.1.4.1.2011.5.2.5.1.9 |
hwRedirectToCpuIndicates whether to redirect packets to the CPU.
After the packets are redirected to the CPU, they cannot be forwarded.
Options:
1. true(1) -indicates to redirect packets to the CPU
2. false(2) -indicates to redirect packets to a specified port
If you want to redirect packets to a destination port,
you can set hwRedirectToIfIndex rather than hwRedirectToCpu.
If hwRedirectCpu is set to true(1) and hwRedirectToIfIndex is entered,
the packets will be redirected to the destination port specified in hwRedirectToIfIndex.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.2.5.1.10 |
hwRedirectToIfIndexIndicates the index for redirecting the packet to the destination port.
The value and algorithm are the same as those of ifIndex.
Range: 0-4294967295rw Unsigned32 .1.3.6.1.4.1.2011.5.2.5.1.11 |
hwRedirectRuntimeDescribes whether the ACL rule for redirecting packets delivered
to a specified port takes effect. This leaf is read-only.
Options:
1. true(1) -if the ACL rule is associated with a time range parameter
and the current time is within the defined time range, the value is true(1),
which indicates validity.
2. false(2) -if the current time is not within the defined time range, the value is false(2),
which indicates invalidity.
If the ACL rule is not associated with a time range parameter, the value is always true(1).ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.2.5.1.12 |
hwRedirectRowStatusIndicates the row status. It is used for delivering an ACL rule for redirecting
packets to a specified port and deleting the delivered ACL rule on a port.
Options:
1. active(1) -when this leaf is queried, the value is fixed to active(1).
2. createAndGo(4) -deliver an ACL rule for redirecting packets to a specified port
3. destroy(6) -delete an ACL rule delivered to a port
When an ACL rule is delivered to a specified port, make sure that at least one
of the following group is configured.
(1)hwRedirectUserAclNum and hwRedirectUserAclSubitem
(2)hwRedirectIpAclNum and hwRedirectIpAclSubitem
(3)hwRedirectLinkAclNum and hwRedirectLinkAclSubitem
In addition to independent configuration of each group, the combined configuration
of group (2) and (3) is permitted. The combined configuration of group (1) and (2)
or combining group (1) and (3) is prohibited.
In addition, hwRedirectRowStatus must be set to createAndGo(4).
To delete the ACL rule delivered to a port, set hwRedirectRowStatus to destroy(6).
When this leaf is queried, the value is fixed to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.2.5.1.13 |
hwRedirectIpv6AclNumIndicates the basic or advanced ACLv6 rule group that is used when a basic
or advanced ACLv6 rule for redirecting packets is delivered to a specified port.
Range: 0, 2000-3999
Make sure that the basic or advanced ACLv6 rule group is already created.
In the query operation, if the basic or advanced ACLv6 rule group is not used,
the value obtained is 0.rw Integer32 (0 | 2000..3999) .1.3.6.1.4.1.2011.5.2.5.1.14 |
hwRedirectIpv6AclSubitemIndicates the basic or advanced ACLv6 rule that is used when a basic or advanced
ACLv6 rule for redirecting packets is delivered to a specified port.
This leaf must be used together with hwRedirectIpv6AclNum,
uniquely identifying an ACLv6 rule.
Range: 0-4294967295
Make sure that the basic or advanced ACLv6 rule group is already created.
In the query operation, if the basic or advanced ACLv6 rule is not used,
the value obtained is 4294967295.rw Unsigned32 .1.3.6.1.4.1.2011.5.2.5.1.15 |
hwStatisticTableDescribes the statistics of packets that match the ACL rule on a specified port.
The indexes of this table are hwStatisticAclIndex, hwStatisticIfIndex, and hwStatisticDirection.
Make sure that the ACL rule in hwStatisticTable is already created in hwAclBasicRuleTable,
hwAclAdvancedRuleTable, hwAclLinkTable, or hwAclUserTable. SEQUENCE OF HwStatisticEntry .1.3.6.1.4.1.2011.5.2.6 |
hwStatisticEntryDescribes the statistics of packets that match the ACL rule on a specified port.
The indexes of this entry are hwStatisticAclIndex, hwStatisticIfIndex, and hwStatisticDirection.
Make sure that the ACL rule in hwStatisticTable is already created in hwAclBasicRuleTable,
hwAclAdvancedRuleTable, hwAclLinkTable, or hwAclUserTable. HwStatisticEntry .1.3.6.1.4.1.2011.5.2.6.1 |
hwStatisticAclIndexIndicates the delivery entry index of an ACL rule for traffic measurement.
It is a delivery record entry index used by software, which is meaningless to users.
The index is used in hwStatisticTable to search the delivery entries fast.
Range: 0-2999
In the create operation, the device automatically allocates a delivery entry index.
There is a suggestion that users can always input 0.ro Integer32 .1.3.6.1.4.1.2011.5.2.6.1.1 |
hwStatisticIfIndexIndicates the port index when the device delivers an ACL rule for traffic measurement
to a specified port. The index uniquely identifies a port.
The value and algorithm are the same as those of ifIndex.
Range: 0-4294967295ro Unsigned32 (0|1..4294967295) .1.3.6.1.4.1.2011.5.2.6.1.2 |
hwStatisticDirectionIndicates the direction where an ACL rule for traffic measurement takes effect
when the device delivers an ACL rule to a specified port.
Options:
1. invalid(0) -indicates an invalid parameter.
2. inbound(1) -indicates the inbound direction of a port.
It is used for measuring the traffic measurement received on a specified port.
3. outbound(2) -indicates the outbound direction of a port.
It is used for measuring the traffic measurement transmitted on a specified port.ro Enumeration .1.3.6.1.4.1.2011.5.2.6.1.3 |
hwStatisticUserAclNumDescribes the user-defined ACL rule group that is used when a user-defined ACL rule
for traffic measurement is delivered to a specified port.
Range: 0, 5000-5999
Make sure that the user-defined ACL rule group is already created.
In the query operation, if the user-defined ACL rule group is not used,
the value obtained is 0.rw Integer32 (0 | 5000..5999) .1.3.6.1.4.1.2011.5.2.6.1.4 |
hwStatisticUserAclSubitemDescribes the user-defined ACL rule that is used when a user-defined ACL rule
for traffic measurement is delivered to a specified port.
This leaf must be used together with hwStatisticUserAclNum,
uniquely identifying an ACL rule.
Range: 0-4294967295
Make sure that the user-defined ACL rule is already created.
In the query operation, if the user-defined ACL rule is not used,
the value obtained is 4294967295.rw Unsigned32 (0|1..4294967295) .1.3.6.1.4.1.2011.5.2.6.1.5 |
hwStatisticIpAclNumDescribes the basic or advanced ACL rule group that is used when a basic
or advanced ACL rule for traffic measurement is delivered to a specified port.
Range: 0, 2000-3999
Make sure that the basic or advanced ACL rule group is already created.
In the query operation, if the basic or advanced ACL rule group is not used,
the value obtained is 0.rw Integer32 (0 | 2000..3999) .1.3.6.1.4.1.2011.5.2.6.1.6 |
hwStatisticIpAclSubitemDescribes the basic or advanced ACL rule that is used when a basic or advanced
ACL rule for traffic measurement is delivered to a specified port.
This leaf must be used together with hwStatisticIpAclNum,
uniquely identifying an ACL rule.
Range: 0-4294967295
Make sure that the basic or advanced ACL rule is already created.
In the query operation, if the basic or advanced ACL rule is not used,
the value obtained is 4294967295.rw Unsigned32 (0|1..4294967295) .1.3.6.1.4.1.2011.5.2.6.1.7 |
hwStatisticLinkAclNumDescribes the L2 ACL rule group that is used when an L2 ACL rule for traffic
measurement is delivered to a specified port.
Range: 0, 4000-4999
Make sure that the L2 ACL rule group is already created.
In the query operation, if the L2 ACL rule group is not used, the value obtained is 0.rw Integer32 (0 | 4000..4999) .1.3.6.1.4.1.2011.5.2.6.1.8 |
hwStatisticLinkAclSubitemDescribes the L2 ACL rule that is used when an L2 ACL rule for traffic measurement
is delivered to a specified port. This leaf must be used together with hwStatisticLinkAclNum,
uniquely identifying an ACL rule.
Range: 0-4294967295
Make sure that the L2 ACL rule is already created.
In the query operation, if the L2 ACL rule is not used, the value obtained is 4294967295.rw Unsigned32 (0|1..4294967295) .1.3.6.1.4.1.2011.5.2.6.1.9 |
hwStatisticRuntimeDescribes whether the ACL rule for traffic measurement delivered to a specified port takes effect.
This leaf is read-only.
Options:
1. true(1) -if the ACL rule is associated with a time range parameter
and the current time is within the defined time range, the value is true(1),
which indicates validity.
2. false(2) -if the current time is not within the defined time range, the value is false(2),
which indicates invalidity.
If the ACL rule is not associated with a time range parameter, the value is always true(1).ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.2.6.1.10 |
hwStatisticPacketCountDescribes the statistics of packets that matches an ACL rule on a specified port.ro Counter64 .1.3.6.1.4.1.2011.5.2.6.1.11 |
hwStatisticCountClearUsed for deleting the statistics of packets that matches an ACL rule on a specified port.
To clear hwStatisticPacketCount, you can set this leaf to cleared(1).
In the query operation, this leaf is fixed to nouse(2).
Options:
1. cleared(1) -delete the statistics of packets that matches an ACL rule on a specified port
2. nouse(2) -in the query operation, this leaf is fixed to nouse(2).rw Enumeration .1.3.6.1.4.1.2011.5.2.6.1.12 |
hwStatisticRowStatusIndicates the row status. It is used for delivering an ACL rule for traffic measurement
to a specified port and deleting the delivered ACL rule on a port.
Options:
1. active(1) -when this leaf is queried, the value is fixed to active(1).
2. createAndGo(4) -deliver an ACL rule for traffic measurement to a specified port
3. destroy(6) -delete an ACL rule for traffic measurement delivered to a port
When an ACL rule is delivered to a specified port,
make sure that at least one of the following group is configured.
(1)hwStatisticUserAclNum and hwStatisticUserAclSubitem
(2)hwStatisticIpAclNum and hwStatisticIpAclSubitem
(3)hwStatisticLinkAclNum and hwStatisticLinkAclSubitem
In addition to independent configuration of each group, the combined configuration of group (2)
and (3) is permitted. The combined configuration of group (1) and (2) or combining group (1) and (3)
is prohibited. In addition, hwStatisticRowStatus must be set to createAndGo(4).
To delete the ACL rule for traffic measurement delivered to a port, set hwStatisticRowStatus to destroy(6).
To delete the statistics of hwStatisticPacketCount, you need not specify hwStatisticRowStatus.
When this leaf is queried, the value is fixed to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.2.6.1.13 |
hwStatisticUnitIndicates Unit of a standard or extended ACLv6 for traffic measurement.
Options:
1. packet(1) -measure by packet
2. byte(2) -measure by byte
Default: packet(1)rw Enumeration .1.3.6.1.4.1.2011.5.2.6.1.14 |
hwStatisticByteCountIndicates the count of matched bytes.ro Counter64 .1.3.6.1.4.1.2011.5.2.6.1.15 |
hwStatisticIpv6AclNumIndicates the basic or advanced ACLv6 rule group that is used when a basic
or advanced ACLv6 rule for traffic measurement is delivered to a specified port.
Range: 0, 2000-3999
Make sure that the basic or advanced ACLv6 rule group is already created.
In the query operation, if the basic or advanced ACLv6 rule group is not used,
the value obtained is 0.rw Integer32 (0 | 2000..3999) .1.3.6.1.4.1.2011.5.2.6.1.16 |
hwStatisticIpv6AclSubitemIndicates the basic or advanced ACLv6 rule that is used when a basic or advanced
ACLv6 rule for traffic measurement is delivered to a specified port.
This leaf must be used together with hwStatisticIpv6AclNum,
uniquely identifying an ACLv6 rule.
Range: 0-4294967295
Make sure that the basic or advanced ACLv6 rule is already created.
In the query operation, if the basic or advanced ACLv6 rule is not used,
the value obtained is 4294967295.rw Unsigned32 .1.3.6.1.4.1.2011.5.2.6.1.17 |
hwMirrorTableDescribes the mirroring for packets that match the ACL rule from a port or a slot to another port.
The indexes of this table are hwMirrorAclIndex, hwMirrorIfIndex, and hwMirrorDirection.
Make sure that the ACL rule in hwMirrorTable is already created in hwAclBasicRuleTable,
hwAclAdvancedRuleTable, hwAclLinkTable, or hwAclUserTable. SEQUENCE OF HwMirrorEntry .1.3.6.1.4.1.2011.5.2.7 |
hwMirrorEntryDescribes the mirroring for packets that match the ACL rule from a port or a slot to another port.
The indexes of this entry are hwMirrorAclIndex, hwMirrorIfIndex, and hwMirrorDirection.
Make sure that the ACL rule in hwMirrorTable is already created in hwAclBasicRuleTable,
hwAclAdvancedRuleTable, hwAclLinkTable, or hwAclUserTable. HwMirrorEntry .1.3.6.1.4.1.2011.5.2.7.1 |
hwMirrorAclIndexIndicates the delivery entry index of an ACL rule for mirroring packets.
It is a delivery record entry index used by software, which is meaningless to users.
The index is used in hwMirrorTable to search the delivery entries fast.
Range: 0-2999
In the create operation, the device automatically allocates a delivery entry index.
There is a suggestion that users can always input 0.ro Integer32 .1.3.6.1.4.1.2011.5.2.7.1.1 |
hwMirrorIfIndexIndicates the port or the slot index when the device delivers an ACL rule for mirroring packets to a specified port.
The index uniquely identifies a port or a slot. The value and algorithm are the same as those of ifIndex.
If the configuration based on a slot, the bits map is shown as follows:
| 31-25 bits | 24-19 bits | 18-13 bits | 12-6 bits | 5-0 bits is reserved |
| indicate iftype | indicate frame ID | indicate slot ID | indicate port ID | |
| the value of iftype | frame ID | slot ID | the value of port ID | the reserved value |
| is always 0x68 | | | is always 0 | is always 0 |
Range: 0-4294967295ro Unsigned32 (0|1..4294967295) .1.3.6.1.4.1.2011.5.2.7.1.2 |
hwMirrorDirectionIndicates the direction where an ACL rule for mirroring packets takes
effect when the device delivers an ACL rule to a specified port or a specified slot.
Options:
1. invalid(0) -indicates an invalid parameter.
2. inbound(1) -indicates the inbound direction of a port or slot.
It is used for mirroring the packets that are received on a specified port or a specified slot.
3. outbound(2) -indicates the outbound direction of a port or slot.
It is used for mirroring the packets that are transmitted on a specified port or a specified slot.ro Enumeration .1.3.6.1.4.1.2011.5.2.7.1.3 |
hwMirrorUserAclNumDescribes the user-defined ACL rule group that is used when a user-defined
ACL rule for mirroring packets is delivered to a specified port or a specified slot.
Range: 0, 5000-5999
Make sure that the user-defined ACL rule group is already created.
In the query operation, if the user-defined ACL rule group is not used,
the value obtained is 0.rw Integer32 (0 | 5000..5999) .1.3.6.1.4.1.2011.5.2.7.1.4 |
hwMirrorUserAclSubitemDescribes the user-defined ACL rule that is used when a user-defined
ACL rule for mirroring packets is delivered to a specified port or a specified slot.
This leaf must be used together with hwMirrorUserAclNum,
uniquely identifying an ACL rule.
Range: 0-4294967295
Make sure that the user-defined ACL rule is already created.
In the query operation, if the user-defined ACL rule is not used,
the value obtained is 4294967295.rw Unsigned32 (0|1..4294967295) .1.3.6.1.4.1.2011.5.2.7.1.5 |
hwMirrorIpAclNumDescribes the basic or advanced ACL rule group that is used when a basic
or advanced ACL rule for mirroring packets is delivered to a specified port or a specified slot.
Range: 0, 2000-3999
Make sure that the basic or advanced ACL rule group is already created.
In the query operation, if the basic or advanced ACL rule group is not used,
the value obtained is 0.rw Integer32 (0 | 2000..3999) .1.3.6.1.4.1.2011.5.2.7.1.6 |
hwMirrorIpAclSubitemDescribes the basic or advanced ACL rule that is used when a basic or advanced
ACL rule for mirroring packets is delivered to a specified port or a specified slot.
This leaf must be used together with hwMirrorIpAclNum, uniquely identifying an ACL rule.
Range: 0-4294967295
Make sure that the basic or advanced ACL rule is already created.
In the query operation, if the basic or advanced ACL rule is not used,
the value obtained is 4294967295.rw Unsigned32 (0|1..4294967295) .1.3.6.1.4.1.2011.5.2.7.1.7 |
hwMirrorLinkAclNumDescribes the L2 ACL rule group that is used when an L2 ACL rule for
mirroring packets is delivered to a specified port or a specified slot.
Range: 0, 4000-4999
Make sure that the L2 ACL rule group is already created.
In the query operation, if the L2 ACL rule group is not used, the value obtained is 0.rw Integer32 (0 | 4000..4999) .1.3.6.1.4.1.2011.5.2.7.1.8 |
hwMirrorLinkAclSubitemDescribes the L2 ACL rule that is used when an L2 ACL rule for mirroring
packets is delivered to a specified port or a specified slot.
This leaf must be used together with hwMirrorLinkAclNum,
uniquely identifying an ACL rule.
Range: 0-4294967295
Make sure that the L2 ACL rule is already created.
In the query operation, if the L2 ACL rule is not used,
the value obtained is 4294967295.rw Unsigned32 (0|1..4294967295) .1.3.6.1.4.1.2011.5.2.7.1.9 |
hwMirrorToIfIndexIndicates the index for mirroring the packets to the destination port.
The value and algorithm are the same as those of ifIndex.
Range: 0-4294967295rw Unsigned32 (0|1..4294967295) .1.3.6.1.4.1.2011.5.2.7.1.10 |
hwMirrorRuntimeDescribes whether the ACL rule for mirroring packets delivered to a specified port or a specified slot takes effect.
This leaf is read-only.
Options:
1. true(1)
and the current time is within the defined time range, the value is true(1),
which indicates validity.
2. false(2)
which indicates invalidity.
If the ACL rule is not associated with a time range parameter, the value is always true(1).ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.2.7.1.11 |
hwMirrorRowStatusIndicates the row status. It is used for delivering an ACL rule for mirroring packets to
a specified port or a specified slot and deleting the delivered ACL rule on a port or a slot.
Options:
1. active(1) -when this leaf is queried, the value is fixed to active(1).
2. createAndGo(4) -deliver an ACL rule for mirroring packets to a specified port or a specified slot
3. destroy(6) -delete an ACL rule delivered to a port or a slot
When an ACL rule is delivered to a specified port or a specified slot,
make sure that at least one of the following group is configured.
(1)hwMirrorUserAclNum and hwMirrorUserAclSubitem
(2)hwMirrorIpAclNum and hwMirrorIpAclSubitem
(3)hwMirrorLinkAclNum and hwMirrorLinkAclSubitem
In addition to independent configuration of each group,
the combined configuration of group (2) and (3) is permitted.
The combined configuration of group (1) and (2) or combining group (1) and (3) is prohibited.
In addition, hwMirrorRowStatus must be set to createAndGo(4).
To delete the ACL rule delivered to a port or a slot, set hwMirrorRowStatus to destroy(6).
When this leaf is queried, the value is fixed to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.2.7.1.12 |
hwMirrorIpv6AclNumIndicates the basic or advanced ACLv6 rule group that is used when a basic
or advanced ACLv6 rule for mirroring packets is delivered to a specified port or a specified slot.
Range: 0, 2000-3999
Make sure that the basic or advanced ACLv6 rule group is already created.
In the query operation, if the basic or advanced ACLv6 rule group is not used,
the value obtained is 0.rw Integer32 (0 | 2000..3999) .1.3.6.1.4.1.2011.5.2.7.1.13 |
hwMirrorIpv6AclSubitemIndicates the basic or advanced ACLv6 rule that is used when a basic or advanced
ACLv6 rule for mirroring packets is delivered to a specified port or a specified slot.
This leaf must be used together with hwMirrorIpv6AclNum, uniquely identifying an ACLv6 rule.
Range: 0-4294967295
Make sure that the basic or advanced ACLv6 rule is already created.
In the query operation, if the basic or advanced ACLv6 rule is not used,
the value obtained is 4294967295.rw Unsigned32 .1.3.6.1.4.1.2011.5.2.7.1.14 |
hwLineRateTableDescribes the rate limitation on packets that match the ACL rule on a specified port.
The index of this table is hwLineRateIfIndex. SEQUENCE OF HwLineRateEntry .1.3.6.1.4.1.2011.5.2.9 |
hwLineRateEntryDescribes the rate limitation on packets that match the ACL rule on a specified port.
The index of this entry is hwLineRateIfIndex. HwLineRateEntry .1.3.6.1.4.1.2011.5.2.9.1 |
hwLineRateIfIndexIndicates the index of the port on which rate limitation is configured.
The value and algorithm are the same as those of ifIndex.
Range: 0-4294967295ro Unsigned32 (0|1..4294967295) .1.3.6.1.4.1.2011.5.2.9.1.1 |
hwLineRateValueIndicates the outbound rate limitation of a port.
Range: -164-10000000 (which must be an integer multiple of 64)
Unit: Kbit/s.
when the value is set to -1 and the value of hwLineRateRowStatus is set to destroy(6),
it will disable the outbound limitation on a specified port.
-1 can be used only in the case of disable the limitation.rw Integer32 (-1|64..10000000) .1.3.6.1.4.1.2011.5.2.9.1.2 |
hwLineRateRowStatusIndicates the row status. It is used to configure, modify,
or delete an ACL rule for rate limitation on a specified port.
Options:
1. active(1) -when this leaf is queried, the value is fixed to active(1).
2. createAndGo(4) -deliver an ACL rule for rate limitation on a specified port
3. destroy(6) -delete an ACL rule for rate limitation on a specified port
When configuring rate limitation on packets on a port,
enter the values of hwLineRateValue and hwLineRateInboundValue
and set hwLineRateRowStatus to createAndGo(4).
When modifying the rate limitation value existed on a port,
set hwLineRateValue or hwLineRateInboundValue rather than hwLineRateRowStatus.
To delete rate limitation on packets on a port, set hwLineRateRowStatus to destroy(6).
When this leaf is queried, the value is fixed to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.2.9.1.3 |
hwLineRateInboundValueIndicates the inbound rate limitation of a port.
Range: -1, 64-10000000 (which must be an integer multiple of 64)
Unit: Kbit/s.
when the value is set to -1 and the value of hwLineRateRowStatus is set to destroy(6),
it will disable the inbound limitation on a specified port.
-1 can be used only in the case of disable the limitation.rw Integer32 (-1|64..10000000) .1.3.6.1.4.1.2011.5.2.9.1.4 |
hwQosTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.2.10 |
hwQosCommonTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.2.10.1 |
hwQosCommonTrapsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.2.10.1.0 |
hwAddRateLimitAclTrapThe hwAddRateLimitAclTrap will be sent when the rate limit acl is added. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.2.10.1.0.1 |
hwDeleteRateLimitAclTrapThe hwDeleteRateLimitAclTrap will be sent when the rate limit acl is deleted. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.2.10.1.0.2 |
hwAddPriorityAclTrapThe hwAddPriorityAclTrap will be sent when the priority acl is added. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.2.10.1.0.3 |
hwDeletePriorityAclTrapThe hwDeletePriorityAclTrap will be sent when the priority acl is deleted. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.2.10.1.0.4 |
hwAddRedirectAclTrapThe hwAddRedirectAclTrap will be sent when the redirect acl is added. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.2.10.1.0.5 |
hwDeleteRedirectAclTrapThe hwDeleteRedirectAclTrap will be sent when the redirect acl is deleted. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.2.10.1.0.6 |
hwAddStatisticAclTrapThe hwAddStatisticAclTrap will be sent when the statistic acl added. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.2.10.1.0.7 |
hwDeleteStatisticAclTrapThe hwDeleteStatisticAclTrap will be sent when the statistic acl is deleted. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.2.10.1.0.8 |
hwAddMirrorAclTrapThe hwAddMirrorAclTrap will be sent when the mirror acl is added. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.2.10.1.0.9 |
hwDeleteMirrorAclTrapThe hwDeleteMirrorAclTrap will be sent when the mirror acl is deleted. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.2.10.1.0.10 |
hwQosAlarmTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.2.10.2 |
hwMirrorEthHead OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.2.11 |
hwMirrorEthHeadDMACDescribes the destination MAC address, which is contained in the Ethernet packet head, added into the mirrored packet.
the value obtained is not the boradcast address, the multicast address, or all zero address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.2.11.1 |
hwMirrorEthHeadSMACDescribes the source MAC address, which is contained in the Ethernet packet head, added into the mirrored packet.
the value obtained is not the boradcast address, the multicast address, or all zero address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.2.11.2 |
hwMirrorEthHeadEthTypeDescribes the ether type value, which is contained in the Ethernet packet head, added into the mirrored packet.
Range: 0-65535
Default value: 0x8100rw Unsigned32 .1.3.6.1.4.1.2011.5.2.11.3 |
hwMirrorEthHeadVlanIDDescribes the vlan Id, which is contained in the Ethernet packet head, added into the mirrored packet.
Range: 1-4093
Default value: 1rw Unsigned32 .1.3.6.1.4.1.2011.5.2.11.4 |
hwMirrorEthHeadProtocolDot1pPriorityDescribes the priority of vlan, which is contained in the Ethernet packet head, added into the mirrored packet.
Range: 0-7
Default value: 0rw Integer32 .1.3.6.1.4.1.2011.5.2.11.5 |
hwOntRateLimitTableIndicates the ONT down stream traffic table. It is used to add, query,
modify or delete an ONT down stream traffic table.
The indexes of this table are hwOntRateLimitIfIndex and hwOntRateLimitOntId. SEQUENCE OF HwOntRateLimitEntry .1.3.6.1.4.1.2011.5.2.12 |
hwOntRateLimitEntryIndicates the ONT down stream traffic table. It is used to add, query,
modify or delete an ONT down stream traffic table.
The indexes of this entry are hwOntRateLimitIfIndex and hwOntRateLimitOntId. HwOntRateLimitEntry .1.3.6.1.4.1.2011.5.2.12.1 |
hwOntRateLimitIfIndexIt is one of the table indexes. Specifies the index of a port for ONT traffic limitation.
It uniquely identifies a port.
The value and algorithm are the same as those of ifIndexes. Unsigned32 (0|1..4294967295) .1.3.6.1.4.1.2011.5.2.12.1.1 |
hwOntRateLimitOntIdIt is one of the table indexes. Indicates the ONT ID. Integer32 .1.3.6.1.4.1.2011.5.2.12.1.2 |
hwOntRateLimitDSTrafficTableIdIndicates the down stream traffic table ID.rw Integer32 .1.3.6.1.4.1.2011.5.2.12.1.3 |
hwOntRateLimitRowStatusIndicates the row status.
Options:
1. active(1) -when this leaf is queried, the value is fixed to active(1).
2. createAndGo(4) -deliver a traffic table ID to an ONT
3. destroy(6) -delete an ONT traffic tablerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.2.12.1.4 |
hwAclUserSideActionmodeSets the action mode of user-side ACL of the system.
Options:
1. port(1) -indicating port-based action mode of user-side ACL
2. slot(2) -indicating slot-based action mode of user-side ACL
3. frame(3) -indicating frame-based action mode of user-side ACL
Default: port(1)rw Enumeration .1.3.6.1.4.1.2011.5.2.17 |