HUAWEI-PWE3-MIB
AI MIB Summary
The HUAWEI-PWE3-MIB enables monitoring and management of Provider Edge (PE) and Provider Router (P) devices running Huawei VRP software to track Pseudowire Emulation Edge-to-Edge (PWE3) session states, tunnel statistics, and associated OAM parameters for Layer 2 VPN services.
The HUAWEI-PWE3-MIB contains objects to manage PWE3.
Main OID:
hwL2VpnPwe3.1.3.6.1.4.1.2011.5.25.119.4
264
Objects
Active
Status
9
Dependencies
Imported Objects
Objects
264 total| Object Name |
|---|
hwL2Vpn OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.119 |
hwL2VpnPwe3The HUAWEI-PWE3-MIB contains objects to
manage PWE3. MODULE-IDENTITY .1.3.6.1.4.1.2011.5.25.119.4 |
hwPwe3MIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.119.4.1 |
hwPwe3Objects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.119.4.1.1 |
hwPWVcTableThis table is the VC configuration table. Users
can create or delete a VC by it. SEQUENCE OF HWPWVcEntry .1.3.6.1.4.1.2011.5.25.119.4.1.1.1 |
hwPWVcEntryProvides the information of a VC entry. HWPWVcEntry .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1 |
hwPWVcIDIndex for the conceptual row identifying a PW within
this PW Emulation table.Used in the outgoing PW ID field within the 'Virtual
Circuit FEC Element'. Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.1 |
hwPWVcTypeThe type of the Virtual Circuit.This value indicate the service to be carried over
this PW. HWL2VpnVcEncapsType (HUAWEI-VPLS-EXT-MIB) .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.2 |
hwPWVcPeerAddrTypeDenotes the address type of the peer node. It should be
set to 'unknown' if PE/PW maintenance protocol is not used
and the address is unknown.
Currently, support 'ipv4' only.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.3 |
hwPWVcPeerAddrThis object contain the value of the peer node address
of the PW/PE maintenance protocol entity. This object
SHOULD contain a value of all zeroes if not applicable
(hwPWVcPeerAddrType is 'unknown').rw IpAddress .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.4 |
hwPWVcStatusIndicates the status of the PW in the local node.
Currently, can't support 'plugout'.ro Enumeration .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.5 |
hwPWVcInboundLabelFor ldp vc, the value will be created by system
automatically.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.6 |
hwPWVcOutboundLabelFor ldp vc, the value will be created by system
automatically.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.7 |
hwPWVcSwitchSignThe sign of switch.ro Enumeration .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.8 |
hwPWVcSwitchIDUsed in the outgoing PW ID field within the 'Virtual
Circuit FEC Element' of the switch PW.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.9 |
hwPWVcSwitchPeerAddrTypeDenotes the address type of the peer node of the switch PW.
It should be set to 'unknown' if PE/PW maintenance protocol
is not used and the address is unknown.
Currently, support 'ipv4' only.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.10 |
hwPWVcSwitchPeerAddrThis object contain the value of the peer node address of the
switch PW of the PW/PE maintenance protocol entity. This object
SHOULD contain a value of all zeroes if not applicable
(hwPWVcSwitchPeerAddrType is 'unknown').rw IpAddress .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.11 |
hwPWVcSwitchInboundLabelFor ldp vc, the value will be created by system
automatically.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.12 |
hwPWVcSwitchOutboundLabelFor ldp vc, the value will be created by system
automatically.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.13 |
hwPWVcGroupIDUsed in the Group ID field sent to the peer PWES
within the maintenance protocol used for PW setup.
Applicable if pwVcOwner equal 'pwIdFecSignaling' or
'l2tpControlProtocol', should be set to zero otherwise.
Currently, this value always be zero.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.14 |
hwPWVcIfIndexIndex of the interface (or the virtual interface)
associated with the PW.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.15 |
hwPWVcAcStatusLocal AC status.
Currently, can't support 'plugout'.ro Enumeration .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.16 |
hwPWVcACOAMStatusDenotes the AC's protocol is operational or not.ro Enumeration .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.17 |
hwPWVcMtuIf not equal zero, the optional Mtu object in the
signaling protocol will be sent with this value,
representing the locally supported MTU size over the
interface (or the virtual interface) associated with the
PW.rw Integer32 (0 | 46..9600) .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.18 |
hwPWVcCtrlWordIf signaling is used for PW establishment, this object
indicates the status of the control word negotiation,
and in both signaling or manual configuration indicates
if CW is to be present or not for this PW.rw HWEnableValue (HUAWEI-VPLS-EXT-MIB) .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.19 |
hwPWVcVCCVIndicates the optional VCCV capabilities of the PW.
According to whether the control word is enabled,
the value can be ccCw(0)|ccAlert(1)|ccTtl(6)|cvLspping(4)|cvBfd(5)
or ccAlert(1)|ccTtl(6)|cvLspping(4)|cvBfd(5). The default value
is ccAlert(1)|ccTtl(6)|cvLspping(4)|cvBfd(5).rw Bits .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.20 |
hwPWVcBandWidthThis object indicates the bandwidth. '0' is the default value.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.21 |
hwPWVcMaxAtmCellsIndicates the max cell supported when vc type is atm.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.22 |
hwPWVcTnlPolicyNameIndicates the tunnel policy name used.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.23 |
hwPWVcQoSBehaviorIndexIndicates the traffic behavior Index when QOS is implemented.
Currently,can't support.Return the default value is '0'.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.24 |
hwPWVcExplicitPathNameIndicates the explicit path name set by the operator.Currently, can't support.rw DisplayString .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.25 |
hwPWVcTemplateNameIndicates the PW template index referenced.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.26 |
hwPWVcSecondaryIndicates whether or not the secondary PW is used.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.27 |
hwPWVcUpTimeIndicates the duration when the PW keeps Up for
the last time, in seconds.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.28 |
hwPWOAMSyncDenotes the AC and PSN are enable or not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.29 |
hwPWVCForBfdIndexThe index of PW for BFD.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.30 |
hwPWVcDelayTimeThe reroute delay time.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.31 |
hwPWVcReroutePolicyReroute policy.rw Enumeration .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.32 |
hwPWVcResumeTimeThe reroute resume time.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.33 |
hwPWVcRerouteReasonLast reroute reason.ro HWL2VpnStateChangeReason (HUAWEI-VPLS-EXT-MIB) .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.34 |
hwPWVcLastRerouteTimeLast reroute time.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.35 |
hwPWVcManualSetFaultDenotes the manual has been set fault or not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.36 |
hwPWVcActiveDenotes the current vc is active or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.37 |
hwPWVcVrIfIndexDenotes the VRRP interface this PW binding to.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.38 |
hwPWVcVrIDDenotes the VrID this PW binding to.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.39 |
hwPWBFDDetectMultiplierThe multiple of detection time.rw Unsigned32 (0 | 3..50) .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.40 |
hwPWBFDMinReceiveIntervalThe interval of bfd messages to be received.rw Unsigned32 (0 | 3..1000) .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.41 |
hwPWBFDMinTransmitIntervalThe interval of bfd messages to be sent.rw Unsigned32 (0 | 3..1000) .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.42 |
hwPWDynamicBFDDetectThis value indicates the capacitability to support dynamic BFD detect.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.43 |
hwPWBFDRemoteVcIDIn the multiple-hop model, the value of remote VC id.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.44 |
hwPWEthOamTypeThis value indicates the type of ETH OAM.rw Enumeration .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.45 |
hwPWCfmMaIndexThis value indicates the current CFM MA index.ro Unsigned32 (0..4095 | 4294967295) .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.46 |
hwPWVcUpStartTimeSpecifies the time this PW status was Up(1).ro DisplayString .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.47 |
hwPWVcUpSumTimeIndicates the accumulated time when the VC is Up,
in seconds.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.48 |
hwPWVcIfNameName of the interface (or the virtual interface)
associated with the PW.ro DisplayString .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.49 |
hwPWVcRowStatusRowStatus for this Table.
Restriction:
The row must be created by 'createAndGo' handle only.
Handle 'createAndWait' is forbidden.
Not support modifying configuration.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.51 |
hwPWVcAtmPackOvertimeSpecifies the AtmPackOvertime.rw Unsigned32 (0 | 100..50000) .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.52 |
hwPWVcPwJitterBufferDepthSpecifies the PwJitterBufferDepth.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.53 |
hwPWVcPwTdmEncapsulationNumSpecifies the PwTdmEncapsulationNum.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.54 |
hwPWVcPwIdleCodeSpecifies the PwIdleCode.rw Unsigned32 (0..255 | 65535) .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.55 |
hwPWVcPwRtpHeaderSpecifies the PwRtpHeader.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.56 |
hwPWVcSwitchTnlPolicyNameIndicates the switch tunnel policy name used.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.57 |
hwPWVcCfmMdIndexThis value indicates the current CFM MD index.ro Unsigned32 (0..4095 | 4294967295) .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.58 |
hwPWVcCfmMaNameThis value indicates the current CFM MA name used.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.59 |
hwPWVcCfmMdNameThis value indicates the current CFM MD name used.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.60 |
hwPWVcRawOrTaggedSpecifies whether the raw or tagged is configured.ro Enumeration .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.61 |
hwPWVcInterworkingTypeSpecifies the interworking type of the VC entry.ro Enumeration .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.62 |
hwPWVcCirSpecifies the committed information rate, based on the VC entry.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.63 |
hwPWVcPirSpecifies the peak information rate, based on the VC entry.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.64 |
hwPWVcQosProfileSpecifies the QoS profile's name, based on the VC entry.rw DisplayString .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.65 |
hwPWVcSwitchCirSpecifies the committed information rate, based on the switch VC entry.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.66 |
hwPWVcSwitchPirSpecifies the peak information rate, based on the switch VC entry.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.67 |
hwPWVcSwitchQosProfileSpecifies the QoS profile's name, based on the switch VC entry.rw DisplayString .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.68 |
hwPWVcTriggerSpecifies whether the PW remote interface shutdown or not.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.69 |
hwPWVcEnableACOAMSpecifies whether ACOAM detection and notification are all enabled or not.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.70 |
hwPWVcSwitchVrIfIndexDenotes the VRRP interface the switch PW binding to.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.71 |
hwPWVcSwitchVrIDDenotes the VrID the switch PW binding to.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.72 |
hwPWVcQosParaFromPWTThis object indicates the configuration of the Qos parameters managed through command line or PW template.ro Enumeration .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.73 |
hwPWVcBfdParaFromPWTThis object indicates the configuration of the Bfd parameters managed through command line or PW template.ro Enumeration .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.74 |
hwPwVcNegotiateModeThis object indicates the negotiation mode of the PW on the local node.rw Enumeration .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.75 |
hwPwVcIsBypassThis object indicates whether the PW is the bypass PW.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.76 |
hwPwVcIsAdminThis object indicates whether the PW is the administrator PW.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.77 |
hwPwVcAdminPwIfIndexThis object indicates the index of the interface on which the administrator PW resides after it is being tracked by the service PW.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.78 |
hwPwVcAdminPwLinkStatusThis object indicates the status of the administrator PW after it is being tracked by the service PW.ro Enumeration .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.79 |
hwPwVcSwitchAdminPwIfIndexThis object indicates the index of the interface on which the administrator PW resides after it is being tracked by the switch PW.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.80 |
hwPwVcSwitchAdminPwLinkStatusThis object indicates the status of the administrator PW after it is being tracked by the switch PW.ro Enumeration .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.81 |
hwPwVcSwitchBackupAdminPwIfIndexThis object indicates the index of the interface on which the administrator PW resides after it is being tracked by the switch backup PW.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.82 |
hwPwVcSwitchBackupAdminPwLinkStatusThis object indicates the status of the administrator PW after it is being tracked by the switch backup PW.ro Enumeration .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.83 |
hwPwVcSwitchBackupVcIdThis object indicates the VC ID of the switch backup PW.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.84 |
hwPwVcSwitchBackupVcPeerAddrTypeThis object indicates type of the IP address of the peer on the switch backup PW.
Currently, only IPv4 addresss are supported.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.85 |
hwPwVcSwitchBackupVcPeerAddrThis object indicates the IP address of the peer on the switch backup PW.rw IpAddress .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.86 |
hwPwVcSwitchBackupVcReceiveLabelThis object indicates the inbound label of the switch backup VC.
For a static VC, the value of the inbound label ranges from 16 to 1023.
For a dynamic VC, the inbound label is automatically generated by the system.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.87 |
hwPwVcSwitchBackupVcSendLabelThis object indicates the outbound label of the switch backup VC.
For a static VC, the value of the outbound label ranges from 0 to 1048575.
For a dynamic VC, the outbound label is automatically generated by the system.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.88 |
hwPwVcSwitchBackupVcTnlPolicyNameThis object indicates the name of the tunnel policy of the switch backup VC.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.89 |
hwPwVcSwitchBackupVcCirThis object indicates the CIR of the switch backup VC.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.90 |
hwPwVcSwitchBackupVcPirThis object indicates the PIR of the switch backup VC.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.91 |
hwPwVcSwitchBackupVcQosProfileThis object indicates the name of the QoS profile of the switch backup VC.rw DisplayString .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.92 |
hwPwVcSlaveMasterModeThis object indicates whether the status of the VC is master or slave.ro Enumeration .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.93 |
hwPwVcSwitchVcSlaveMasterModeThis object indicates whether the status of the switch VC is master or slave.ro Enumeration .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.94 |
hwPwVcSwitchBackupVcSlaveMasterModeThis object indicates whether the status of the switch backup VC is master or slave.ro Enumeration .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.95 |
hwPwVcSwitchVcActiveThis object indicates whether the status of the switch VC is active or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.96 |
hwPwVcSwitchBackupVcActiveThis object indicates whether the status of the switch backup VC is active or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.97 |
hwPwVcSwitchCwTransThis object indicates whether the SPE support Control Word Transparent or not,default is false.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.98 |
hwPwVcSwitchVcServiceNameThis object indicates the service name of the switch VC.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.99 |
hwPwVcSwitchBackupVcServiceNameThis object indicates the service name of the switch backup VC.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.119.4.1.1.1.1.100 |
hwPWVcTnlTableThis table is used to search the tunnel index of a VC. SEQUENCE OF HWPWVcTnlEntry .1.3.6.1.4.1.2011.5.25.119.4.1.1.2 |
hwPWVcTnlEntryProvides the information of a VC tunnel entry. HWPWVcTnlEntry .1.3.6.1.4.1.2011.5.25.119.4.1.1.2.1 |
hwPWVcTnlIndexThis object indicates the tunnel index of the VC. Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.2.1.1 |
hwPWVcTnlTypeThis object indicates the tunnel type.ro Enumeration .1.3.6.1.4.1.2011.5.25.119.4.1.1.2.1.2 |
hwPWTnlForBfdIndexThis object indicates the index of LSP for BFD.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.2.1.3 |
hwPWVcStatisticsTableThis table contains the Pwe3's VC packets statistics. SEQUENCE OF HWPWVcStatisticsEntry .1.3.6.1.4.1.2011.5.25.119.4.1.1.3 |
hwPWVcStatisticsEntryProvides the information of the Pwe3's VC packets
statistics. HWPWVcStatisticsEntry .1.3.6.1.4.1.2011.5.25.119.4.1.1.3.1 |
hwPWVcStatisticsRcvPktsThe total number of packets received on this VC.ro Counter64 .1.3.6.1.4.1.2011.5.25.119.4.1.1.3.1.1 |
hwPWVcStatisticsRcvBytesThe total number of bytes received on this VC.ro Counter64 .1.3.6.1.4.1.2011.5.25.119.4.1.1.3.1.2 |
hwPWVcStatisticsSndPktsThe total number of packets sent on this VC.ro Counter64 .1.3.6.1.4.1.2011.5.25.119.4.1.1.3.1.3 |
hwPWVcStatisticsSndBytesThe total number of bytes sent on the VC.ro Counter64 .1.3.6.1.4.1.2011.5.25.119.4.1.1.3.1.4 |
hwPWRemoteVcTableThis table provides remote PW information for
each local PW. SEQUENCE OF HWPWRemoteVcEntry .1.3.6.1.4.1.2011.5.25.119.4.1.1.4 |
hwPWRemoteVcEntryAn entry in this table is created by the agent for
every PW. HWPWRemoteVcEntry .1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1 |
hwPWRemoteVcIDUsed in the outgoing PW ID field within the 'Virtual
Circuit FEC Element' of the remote PW.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.1 |
hwPWRemoteVcTypeThis value indicate the service to be carried over
the remote PW.ro HWL2VpnVcEncapsType (HUAWEI-VPLS-EXT-MIB) .1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.2 |
hwPWRemoteVcStatusIndicates the forwarding status of the remote VC.ro Enumeration .1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.3 |
hwPWRemoteVcGroupIDIndicates the Group ID field of the remote PW.
Currently, this value always be zero.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.4 |
hwPWRemoteVcMtuIndicates the supported MTU size of the remote PW.ro Unsigned32 (0 | 46..9600) .1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.5 |
hwPWRemoteVcCtrlwordIndicates the control word capability of the remote PW.ro HWEnableValue (HUAWEI-VPLS-EXT-MIB) .1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.6 |
hwPWRemoteVcMaxAtmCellsIndicates the max cell supported of the remote PW
when vctype is atm.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.7 |
hwPWRemoteVcNotifIndicates notification is supported by the remote PW.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.119.4.1.1.4.1.8 |
hwPWVcSwitchNotifEnableIf this object is set to enable(1), then it enables
the emission of hwPWVcSwitchWtoP and hwPWVcSwitchPtoW
notifications; otherwise these notifications are not
emitted.
The default value is disable (2).rw HWEnableValue (HUAWEI-VPLS-EXT-MIB) .1.3.6.1.4.1.2011.5.25.119.4.1.1.5 |
hwPWVcUpDownNotifEnableThis object indicates the enable sign of PW VC state
change notification.
The default value is disable (2).rw HWEnableValue (HUAWEI-VPLS-EXT-MIB) .1.3.6.1.4.1.2011.5.25.119.4.1.1.6 |
hwPWVcDeletedNotifEnableThis object indicates the enable sign of PW VC deletion
notification.
The default value is disable (2).rw HWEnableValue (HUAWEI-VPLS-EXT-MIB) .1.3.6.1.4.1.2011.5.25.119.4.1.1.7 |
hwPWVcStateChangeReasonThis object indicates the reason of PE VC
state change.ro HWL2VpnStateChangeReason (HUAWEI-VPLS-EXT-MIB) .1.3.6.1.4.1.2011.5.25.119.4.1.1.8 |
hwPWVcSwitchRmtIDThis object indicates the VC ID of PW
switch between working PW and protect PW .ro Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.9 |
hwLdpPWStateChangeReasonThis object indicates the reason of LDP PW VC's
state change.ro HWLdpPwStateChangeReason .1.3.6.1.4.1.2011.5.25.119.4.1.1.10 |
hwPWVcTDMPerfCurrentTableThis table provides per TDM PW performance information. The contents of this
table entry are reset to zero and gotten new information every 15 minutes. SEQUENCE OF HWPWVcTDMPerfCurrentEntry .1.3.6.1.4.1.2011.5.25.119.4.1.1.11 |
hwPWVcTDMPerfCurrentEntryAn entry in this table is created by the agent for every TDM PW entry. HWPWVcTDMPerfCurrentEntry .1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1 |
hwPWVcTDMPerfCurrentMissingPktsNumber of missing packets (as detected via control word
sequence number gaps).ro Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1.1 |
hwPWVcTDMPerfCurrentJtrBfrOverrunsNumber of times the jitter buffer was overrun.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1.2 |
hwPWVcTDMPerfCurrentJtrBfrUnderrunsNumber of times a packet needed to be played
out and the jitter buffer was empty.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1.3 |
hwPWVcTDMPerfCurrentMisOrderDroppedNumber of packets detected out of order (via control word
sequence numbers) that could not be re-ordered or could
not fit in the jitter buffer.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1.4 |
hwPWVcTDMPerfCurrentMalformedPktNumber of packets detected with unexpected size or
bad headers' stack.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1.5 |
hwPWVcTDMPerfCurrentESsThe counter associated with the number of Error
Seconds encountered. Any malformed packet, sequence error,
LOPS, and the like are considered as Error Seconds.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1.6 |
hwPWVcTDMPerfCurrentSESsThe counter associated with the number of
Severely Error Seconds encountered.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1.7 |
hwPWVcTDMPerfCurrentUASsThe counter associated with the number of
Unavailable Seconds encountered. Any consecutive
ten seconds of SES are counted as one Unavailable
Seconds (UAS).ro Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.1.11.1.8 |
hwPwe3MIBTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.119.4.1.2 |
hwPWVcSwitchWtoPThis notification is generated when switch from working
PW to protect PW happens. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.119.4.1.2.1 |
hwPWVcSwitchPtoWThis notification is generated when switch from protect
PW to working PW happens. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.119.4.1.2.2 |
hwPWVcDownThis notification indicates the VC's state changes to down. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.119.4.1.2.3 |
hwPWVcUpThis notification indicates the VC's state changes to up. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.119.4.1.2.4 |
hwPWVcDeletedThis notification indicates the VC is deleted. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.119.4.1.2.5 |
hwPWVcBackupThis notification indicates the VC's state changes to backup. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.119.4.1.2.6 |
hwLdpPWVcDownThis notification indicates the LDP PW VC's state changes to down. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.119.4.1.2.7 |
hwLdpPWVcUpThis notification indicates the Ldp PW VC's state changes to up. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.119.4.1.2.8 |
hwPWVcStatusChangeThis notification indicates the VC's Active state changed. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.119.4.1.2.9 |
hwVpwsPwRedundancyDegradedVPWS PW redundancy reported a protect degraded alarm. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.119.4.1.2.10 |
hwVpwsPwRedundancyDegradedClearVPWS PW redundancy reported the clearing of the protect degraded alarm. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.119.4.1.2.11 |
hwSvcObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.119.4.1.3 |
hwSvcTableThis table is the SVC configuration table. Users
can create or delete a SVC by it. SEQUENCE OF HWSvcEntry .1.3.6.1.4.1.2011.5.25.119.4.1.3.1 |
hwSvcEntryProvides the information of a SVC entry. HWSvcEntry .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1 |
hwSvcIfIndexIndex of the interface (or the virtual interface)
associated with the PW. InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.1 |
hwSvcIDIndex for the conceptual row identifying a PW within
this PW Emulation table.Used in the outgoing PW ID field within the 'Virtual
Circuit FEC Element'.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.2 |
hwSvcTypeIndex for the conceptual row identifying a PW within
this PW Emulation table.This value indicate the service to be carried over
this PW.rw HWL2VpnVcEncapsType (HUAWEI-VPLS-EXT-MIB) .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.3 |
hwSvcPeerAddrTypeDenotes the address type of the peer node. It should be
set to 'unknown' if PE/PW maintenance protocol is not used
and the address is unknown.
Currently, support 'ipv4' only.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.4 |
hwSvcPeerAddrThis object contain the value of the peer node address
of the PW/PE maintenance protocol entity. This object
SHOULD contain a value of all zeroes if not applicable
(hwSvcPeerAddrType is 'unknown').rw IpAddress .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.5 |
hwSvcStatusIndicates the status of the PW in the local node.
Currently, can't support 'plugout'.ro Enumeration .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.6 |
hwSvcInboundLabelThis object indicates the inbound label.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.7 |
hwSvcOutboundLabelThis object indicates the outbound label.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.8 |
hwSvcGroupIDUsed in the Group ID field sent to the peer PWES
within the maintenance protocol used for PW setup.
Applicable if SvcOwner equal 'pwIdFecSignaling' or
'l2tpControlProtocol', should be set to zero otherwise.
Currently, this value always be zero.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.9 |
hwSvcAcStatusLocal AC status.
Currently, can't support 'plugout'.ro Enumeration .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.10 |
hwSvcACOAMStatusDenotes the AC's protocol is operational or not.ro Enumeration .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.11 |
hwSvcMtuIf not equal zero, the optional Mtu object in the
signaling protocol will be sent with this value,
representing the locally supported MTU size over the
interface (or the virtual interface) associated with the
PW.Currently, can't support.'0' is the default value.ro Integer32 (0 | 46..9600) .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.12 |
hwSvcCtrlWordIf signaling is used for PW establishment, this object
indicates the status of the control word negotiation,
and in both signaling or manual configuration indicates
if CW is to be present or not for this PW.rw HWEnableValue (HUAWEI-VPLS-EXT-MIB) .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.13 |
hwSvcVCCVIndicates the optional VCCV capabilities of the SVC.
According to whether the control word is enabled,
the value can be ccCw(0)|ccAlert(1)|cvLspping(4)|cvBfd(5)
or ccAlert(1)|cvLspping(4)|cvBfd(5). The default
value is ccAlert(1)|cvLspping(4)|cvBfd(5).rw Bits .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.14 |
hwSvcBandWidthThis object indicates the bandwidth.Currently, can't support.'0' is the default value.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.15 |
hwSvcMaxAtmCellsIndicates the max cell supported when vc type is atm.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.16 |
hwSvcTnlPolicyNameIndicates the tunnel policy name used.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.17 |
hwSvcQoSBehaviorIndexIndicates the traffic behavior Index when QOS is implemented.
Currently, can't support.'0' is the default value.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.18 |
hwSvcPWTemplateNameIndicates the PW template index referenced.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.19 |
hwSvcUpTimeIndicates the duration when the SVC keeps Up
for the last time, in seconds.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.20 |
hwSvcOAMSyncDenotes the AC and PSN are enable or not.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.21 |
hwSvcForBfdIndexThe index of PW for BFD.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.22 |
hwSvcSecondaryIndicates whether or not the secondary PW is used.Currently, can't support.Return the default value is 'false'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.23 |
hwSvcDelayTimeThe reroute delay time.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.24 |
hwSvcReroutePolicyReroute policy.ro Enumeration .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.25 |
hwSvcResumeTimeThe reroute resume time.Currently, can't support.Return the default value is '0'.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.26 |
hwSvcRerouteReasonLast reroute reason.ro HWL2VpnStateChangeReason (HUAWEI-VPLS-EXT-MIB) .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.27 |
hwSvcLastRerouteTimeLast reroute time.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.28 |
hwSvcManualSetFaultDenotes the manual has been set fault or not.Currently, can't support.Return the default value is 'false'.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.29 |
hwSvcActiveDenotes the current vc is active or not.Currently, can't support.Return the default value is 'false'.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.30 |
hwSvcUpStartTimeSpecifies the time this PW status was Up(1).ro DisplayString .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.31 |
hwSvcUpSumTimeIndicates the accumulated time when the SVC is Up,
in seconds.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.32 |
hwSvcAtmPackOvertimeSpecifies the AtmPackOvertime.rw Unsigned32 (0 | 100..50000) .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.33 |
hwSvcPwJitterBufferDepthSpecifies the PwJitterBufferDepth.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.34 |
hwSvcPwTdmEncapsulationNumSpecifies the PwTdmEncapsulationNum.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.35 |
hwSvcPwIdleCodeSpecifies the PwIdleCode.rw Unsigned32 (0..255 | 65535) .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.36 |
hwSvcPwRtpHeaderSpecifies the PwRtpHeader.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.37 |
hwSvcRawOrTaggedSpecifies whether the VLAN tag of the SVC entry is attached or stripped.rw Enumeration .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.38 |
hwSvcInterworkingTypeSpecifies the interworking type of the SVC entry.rw Enumeration .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.39 |
hwSvcCirSpecifies the committed information rate, based on the SVC entry.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.40 |
hwSvcPirSpecifies the peak information rate, based on the SVC entry.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.41 |
hwSvcQosProfileSpecifies the QoS profile's name, based on the SVC entry.rw DisplayString .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.42 |
hwSvcRowStatusRowStatus for this Table.
Restriction:
The row must be created by 'createAndGo' handle only.
Handle 'createAndWait' is forbidden.
Not support modifying configuration.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.119.4.1.3.1.1.51 |
hwSvcTnlTableThis table is used to search the tunnel index of a SVC. SEQUENCE OF HWSvcTnlEntry .1.3.6.1.4.1.2011.5.25.119.4.1.3.2 |
hwSvcTnlEntryProvides the information of a SVC tunnel entry. HWSvcTnlEntry .1.3.6.1.4.1.2011.5.25.119.4.1.3.2.1 |
hwSvcTnlIndexThis object indicates the tunnel index of the SVC. Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.3.2.1.1 |
hwSvcTnlTypeThis object indicates the tunnel type.ro Enumeration .1.3.6.1.4.1.2011.5.25.119.4.1.3.2.1.2 |
hwSvcTnlForBfdIndexThis object indicates the index of LSP for BFD.
Currently, can't support.Return the default value is '0'.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.3.2.1.3 |
hwSvcStatisticsTableThis table contains the L2vpn's SVC packets statistics. SEQUENCE OF HWSvcStatisticsEntry .1.3.6.1.4.1.2011.5.25.119.4.1.3.3 |
hwSvcStatisticsEntryProvides the information of the L2VPN's SVC packets
Statistics. HWSvcStatisticsEntry .1.3.6.1.4.1.2011.5.25.119.4.1.3.3.1 |
hwSvcStatisticsRcvPktsThe total number of packets received on this SVC.ro Counter64 .1.3.6.1.4.1.2011.5.25.119.4.1.3.3.1.1 |
hwSvcStatisticsRcvBytesThe total number of bytes received on this SVC.ro Counter64 .1.3.6.1.4.1.2011.5.25.119.4.1.3.3.1.2 |
hwSvcStatisticsSndPktsThe total number of packets sent on this SVC.ro Counter64 .1.3.6.1.4.1.2011.5.25.119.4.1.3.3.1.3 |
hwSvcStatisticsSndBytesThe total number of bytes sent on the SVC.ro Counter64 .1.3.6.1.4.1.2011.5.25.119.4.1.3.3.1.4 |
hwSvcSwitchNotifEnableIf this object is set to enable(1), then it enables
the emission of hwSvcSwitchWtoP and hwSvcSwitchPtoW
notifications; otherwise these notifications are not
emitted.Currently, can't support.
The default value is disable (2).rw HWEnableValue (HUAWEI-VPLS-EXT-MIB) .1.3.6.1.4.1.2011.5.25.119.4.1.3.4 |
hwSvcUpDownNotifEnableThis object indicates the enable sign of PW VC state
change notification.
The default value is disable (2).rw HWEnableValue (HUAWEI-VPLS-EXT-MIB) .1.3.6.1.4.1.2011.5.25.119.4.1.3.5 |
hwSvcDeletedNotifEnableThis object indicates the enable sign of PW VC deletion
notification.
The default value is disable (2).rw HWEnableValue (HUAWEI-VPLS-EXT-MIB) .1.3.6.1.4.1.2011.5.25.119.4.1.3.6 |
hwSvcStateChangeReasonThis object indicates the reason of PE VC
state change.ro HWL2VpnStateChangeReason (HUAWEI-VPLS-EXT-MIB) .1.3.6.1.4.1.2011.5.25.119.4.1.3.7 |
hwL2vpnSvcMIBTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.119.4.1.4 |
hwSvcSwitchWtoPThis notification is generated when switch from working
PW to protect PW happens.Currently, can't support. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.119.4.1.4.1 |
hwSvcSwitchPtoWThis notification is generated when switch from protect
PW to working PW happens.Currently, can't support. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.119.4.1.4.2 |
hwSvcDownThis notification indicates the SVC's state changes to down. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.119.4.1.4.3 |
hwSvcUpThis notification indicates the SVC's state changes to up. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.119.4.1.4.4 |
hwSvcDeletedThis notification indicates the SVC is deleted. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.119.4.1.4.5 |
hwPWTemplateTableThis table specifies information for configuring and
status monitoring to PW tempalte. SEQUENCE OF HWPWTemplateEntry .1.3.6.1.4.1.2011.5.25.119.4.1.5 |
hwPWTemplateEntryA row in this table represents a pseudo wire (PW) template.
It is indexed by hwPWCmdTemplateIndex, which uniquely
identifying a singular tempalte. HWPWTemplateEntry .1.3.6.1.4.1.2011.5.25.119.4.1.5.1 |
hwPWTemplateNameThe name of the PW template.
Set by the operator to indicate the protocol responsible
for establishing this PW. The value 'static' is used in all
cases where no maintenance protocol (PW signaling) is used
to set-up the PW, i.e. require configuration of entries in
the PW tables including PW labels, etc. The value 'ldp' is
used in case of signaling with the PWid FEC element with LDP
signaling. The value 'rsvp' indicate the use of rsvp
control protocol.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.1 |
hwPWTemplatePeerAddrTypeDenotes the address type of the peer node. It should be
set to 'unknown' if PE/PW maintenance protocol is not used
and the address is unknown.
Currently, support 'ipv4' only.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.2 |
hwPWTemplatePeerAddrThis object contain the value of the peer node address
of the PW/PE maintenance protocol entity.rw IpAddress .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.3 |
hwPWTemplateCtrlwordIndicates the control word capability of the switch PW.rw HWEnableValue (HUAWEI-VPLS-EXT-MIB) .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.4 |
hwPWTemplateVCCVIndicates the optional VCCV capabilities of the PW template.
According to whether the control word is enabled,
the value can be ccCw(0)|ccAlert(1)|ccTtl(6)|cvLspping(4)|cvBfd(5)
or ccAlert(1)|ccTtl(6)|cvLspping(4)|cvBfd(5). The default
value is ccAlert(1)|ccTtl(6)|cvLspping(4)|cvBfd(5).rw Bits .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.5 |
hwPWTemplateFragIndicates whether or not fragmentaion is supported.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.6 |
hwPWTemplateBandwidthIndicates the bandwitdh when signaling protocol is rsvp.
Currently, can't support.'0' is the default value.ro Integer32 .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.7 |
hwPWTemplateTnlPolicyNameIndicates the tunnel policy name used.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.8 |
hwPWTemplateQoSBehaviorIndexIndicates the traffic behavior Index when QOS is
implemented.Currently, can't support.'0' is the default value.rw Integer32 .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.9 |
hwPWTemplateExplicitPathNameIndicates the explicit path name set by the operator.Currently, can't support.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.10 |
hwPWTemplateBFDDetectMultiplierThe multiple of detection time.rw Unsigned32 (0 | 3..50) .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.11 |
hwPWTemplateBFDMinReceiveIntervalThe interval of bfd messages to be received.rw Unsigned32 (0 | 3..1000) .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.12 |
hwPWTemplateBFDMinTransmitIntervalThe interval of bfd messages to be sent.rw Unsigned32 (0 | 3..1000) .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.13 |
hwPWTemplateDynamicBFDDetectThis value indicates the capacitability to support dynamic BFD detect.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.14 |
hwPWTemplateMaxAtmCellsSpecifies the MaxAtmCells.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.15 |
hwPWTemplateAtmPackOvertimeSpecifies the AtmPackOvertime.rw Unsigned32 (0 | 100..50000) .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.16 |
hwPWTemplatePwJitterBufferDepthSpecifies the PwJitterBufferDepth.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.17 |
hwPWTemplatePwTdmEncapsulationNumSpecifies the PwTdmEncapsulationNum.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.18 |
hwPWTemplatePwIdleCodeSpecifies the PwIdleCode.rw Unsigned32 (0..255 | 65535) .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.19 |
hwPWTemplatePwRtpHeaderSpecifies the PwRtpHeader.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.20 |
hwPWTemplatePwCCSeqEnableSpecifies the CC Sequence is enable or not.rw HWEnableValue (HUAWEI-VPLS-EXT-MIB) .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.21 |
hwPWTemplateCirSpecifies the committed information rate, based on the PW template entry.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.22 |
hwPWTemplatePirSpecifies the peak information rate, based on the PW template entry.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.23 |
hwPWTemplateQosProfileSpecifies the QoS profile's name, based on the PW template entry.rw DisplayString .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.24 |
hwPWTemplateFlowLabelThe value of this object identifies whether the PW FlowLabel is enabled.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.25 |
hwPWTemplateRowStatusRowStatus for this Table.
Restriction:
The row must be created by 'createAndGo' handle only.
Handle 'createAndWait' is forbidden.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.119.4.1.5.1.51 |
hwPWTemplateMIBTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.119.4.1.6 |
hwPWTemplateCannotDeletedThis notification indicates the PWTemplate cannot be deleted. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.119.4.1.6.1 |
hwPWTableObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.119.4.1.7 |
hwPWTableThis table indicates a PW, that is Static PW or LDP PW SEQUENCE OF HWPWEntry .1.3.6.1.4.1.2011.5.25.119.4.1.7.1 |
hwPWEntryProvides the information of a VC key entry. HWPWEntry .1.3.6.1.4.1.2011.5.25.119.4.1.7.1.1 |
hwPWIdIndex for the conceptual row identifying a PW within
this PW Emulation table.Used in the outgoing PW ID field within the 'Virtual
Circuit FEC Element'. Unsigned32 .1.3.6.1.4.1.2011.5.25.119.4.1.7.1.1.1 |
hwPWTypeIndex for the conceptual row identifying a PW within
this PW Emulation table.This value indicate the service to be carried over
this PW. HWL2VpnVcEncapsType (HUAWEI-VPLS-EXT-MIB) .1.3.6.1.4.1.2011.5.25.119.4.1.7.1.1.2 |
hwPWPeerIpThis object contain the value of the peer node address
of the PW/PE maintenance protocol entity. This object
SHOULD contain a value of all zeroes if not applicable. IpAddress .1.3.6.1.4.1.2011.5.25.119.4.1.7.1.1.3 |
hwPWInterfaceIndexIndex of the interface (or the virtual interface)
associated with the PW.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.2011.5.25.119.4.1.7.1.1.4 |
hwPwe3MIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.119.4.3 |
hwPwe3MIBCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.119.4.3.1 |
hwPwe3MIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.119.4.3.2 |
hwL2vpnSvcMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.119.4.3.3 |
hwL2vpnPWTableMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.119.4.3.4 |
hwPWTemplateMIBGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.119.4.3.5 |