Home/Catalog/HUAWEI-IPFPM-MIB

HUAWEI-IPFPM-MIB

AI MIB Summary

The HUAWEI-IPFPM-MIB enables the monitoring and management of IP Flow Performance Measurement (IPFPM) metrics on Huawei network devices by defining objects for the Measurement Control Point (MCP), Data Collecting Point (DCP), and Target Logic Point (TLP) roles to collect, aggregate, and report flow-level performance data such as packet loss, delay, and jitter.

This MIB describes objects to manage IPFPM (IP Flow Performance Measurement). IPFPM provides a method for IP flow performance measurement, in which MCP (Measurement Control Point),DCP (Data Collecting Point) and TLP (Target Logic Point) are three kinds of roles working together. TLP is responsible for implementing measurement and generating the measurement data. DCP manages TLPs and get measurement data from them to report to MCP. MCP works as the control role to collect and calculate the measurement data that DCP reported.
Main OID:
hwIpfpmMib.1.3.6.1.4.1.2011.5.25.316
272
Objects
Active
Status
5
Dependencies

Imported Objects

HUAWEI-MIB
IF-MIB
SNMPv2-CONF
SNMPv2-SMI
SNMPv2-TC

Objects

272 total
Object Name
hwIpfpmMibThis MIB describes objects to manage IPFPM (IP Flow Performance Measurement). IPFPM provides a method for IP flow performance measurement, in which MCP (Measurement Control Point),DCP (Data Collecting Point) and TLP (Target Logic Point) are three kinds of roles working together. TLP is responsible for implementing measurement and generating the measurement data. DCP manages TLPs and get measurement data from them to report to MCP. MCP works as the control role to collect and calculate the measurement data that DCP reported.
MODULE-IDENTITY
.1.3.6.1.4.1.2011.5.25.316
hwIpfpmMcpObjects
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.316.1
hwIpfpmMcpConfiguration
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.316.1.1
hwIpfpmMcpGlobalTable
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.316.1.1.1
hwIpfpmMcpEnableThis object indicates that the MCP (Measurement Control Point) function is 'enabled(1)' or 'disabled(2)'.rw
HWEnabledStatus
.1.3.6.1.4.1.2011.5.25.316.1.1.1.1
hwIpfpmMcpIdThe value of this object indicates the identification of MCP. The value 0.0.0.0 represents that it is not configured.rw
IpAddress
.1.3.6.1.4.1.2011.5.25.316.1.1.1.2
hwIpfpmMcpUdpPortThe value of this object indicates the port that MCP listens on as the server.rw
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.1.1.3
hwIpfpmMcpAuthTableThe table contains attribute of MCP authenticaiton.
SEQUENCE OF HwIpfpmMcpAuthEntry
.1.3.6.1.4.1.2011.5.25.316.1.1.4
hwIpfpmMcpAuthEntryIPFPM authenticaiton configuration information.
HwIpfpmMcpAuthEntry
.1.3.6.1.4.1.2011.5.25.316.1.1.4.1
hwIpfpmMcpAuthKeyIdIdentification of the authentication key.
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.1.4.1.1
hwIpfpmMcpAuthTypeAuthentication type of the key. The enumeration 'hmac-sha256(1)' represents the password is sent after being encrypted through hmac-sha256. By default, authentication is not configured.rw
HWIpfpmAuthType
.1.3.6.1.4.1.2011.5.25.316.1.1.4.1.2
hwIpfpmMcpAuthKeyThe password used as an IPFPM authentication key.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.316.1.1.4.1.3
hwIpfpmMcpAuthRowStatusUsed for controlling the creation and deletion of this row.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.316.1.1.4.1.4
hwIpfpmMcpInstTableThe table contains attribute of MCP test instances.
SEQUENCE OF HwIpfpmMcpInstEntry
.1.3.6.1.4.1.2011.5.25.316.1.1.5
hwIpfpmMcpInstEntryIPFPM configuration information for a particular MCP test instance.
HwIpfpmMcpInstEntry
.1.3.6.1.4.1.2011.5.25.316.1.1.5.1
hwIpfpmMcpInstIdIdentification of the test instance.
Integer32 (1..8355838|16711681..16777214)
.1.3.6.1.4.1.2011.5.25.316.1.1.5.1.1
hwIpfpmMcpInstDescDescription of the test instance. if the string length is 0, it represents that it is not configured.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.316.1.1.5.1.2
hwIpfpmMcpLossRatioUpThresThis value divided by 1000000 is the upper threshold of loss ratio(%) for alarm. The value 0 represents that it is not configured, and the alarm is not enabled.rw
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.1.5.1.3
hwIpfpmMcpLossRatioLowThresThis value divided by 1000000 is the lower threshold of loss ratio(%) for alarm recovery. The value 0 represents that it is not configured, and the alarm is not enabled.rw
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.1.5.1.4
hwIpfpmMcpOneDelayUpThresUpper threshold of one-way delay(us) for alarm. The value 0 represents that it is not configured, and the alarm is not enabled.rw
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.1.5.1.5
hwIpfpmMcpOneDelayLowThresLower threshold of one-way delay(us) for alarm recovery. The value 0 represents that it is not configured, and the alarm is not enabled.rw
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.1.5.1.6
hwIpfpmMcpTwoDelayUpThresUpper threshold of two-way delay(us) for alarm. The value 0 represents that it is not configured, and the alarm is not enabled.rw
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.1.5.1.7
hwIpfpmMcpTwoDelayLowThresLower threshold of two-way delay(us) for alarm recovery. The value 0 represents that it is not configured, and the alarm is not enabled.rw
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.1.5.1.8
hwIpfpmMcpMeasureEnableThis object indicates that the MCP instance measure function is 'enabled(1)' or 'disabled(2)'.rw
HWEnabledStatus
.1.3.6.1.4.1.2011.5.25.316.1.1.5.1.9
hwIpfpmMcpInstRowStatusUsed for controlling the creation and deletion of this row.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.316.1.1.5.1.10
hwIpfpmMcpInstTypeThis object indicates that the MCP instance type. 'unicast(0)' means unicast measurement instance. 'multicastsrc(1)' means multicast measurement source instance. 'multicastrecv(2)' means multicast measurement receiver instance.rw
HWIpfpmInstType
.1.3.6.1.4.1.2011.5.25.316.1.1.5.1.11
hwIpfpmMcpSourceInstIdThis object indicates the source instance of multicastrecv. This object is only valid when hwIpfpmMcpInstType is 'multicastrecv(2)'. We can ingore this object value when hwIpfpmMcpInstType is not 'multicastrecv(2)'.rw
Integer32 (0|16711681..16777214)
.1.3.6.1.4.1.2011.5.25.316.1.1.5.1.12
hwIpfpmMcpDcpTableThe table describe the DCPs belonging to MCP test instances.
SEQUENCE OF HwIpfpmMcpDcpEntry
.1.3.6.1.4.1.2011.5.25.316.1.1.6
hwIpfpmMcpDcpEntryIPFPM DCPs information for a particular MCP test instance.
HwIpfpmMcpDcpEntry
.1.3.6.1.4.1.2011.5.25.316.1.1.6.1
hwIpfpmMcpDcpIdIdentification of DCP which belongs to the test instance.
IpAddress
.1.3.6.1.4.1.2011.5.25.316.1.1.6.1.1
hwIpfpmMcpDcpRowStatusUsed for controlling the creation and deletion of this row.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.316.1.1.6.1.2
hwIpfpmMcpAchTableThe table describe the ACHs(Atomic Closed Hop) belonging to MCP test instances.
SEQUENCE OF HwIpfpmMcpAchEntry
.1.3.6.1.4.1.2011.5.25.316.1.1.7
hwIpfpmMcpAchEntryIPFPM ACHs(Atomic Closed Hop) information for a particular MCP test instance.
HwIpfpmMcpAchEntry
.1.3.6.1.4.1.2011.5.25.316.1.1.7.1
hwIpfpmMcpAchIdThe object indicates the identification of the ACH.
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.1.7.1.1
hwIpfpmMcpFlowTypeThe object indicates the flow that the ACH monitors is 'forward(1)' or 'backward(2)', 'bidirectional(3)'. The value none(0) represents that it is not configured.rw
HWIpfpmMcpFlowType
.1.3.6.1.4.1.2011.5.25.316.1.1.7.1.2
hwIpfpmMcpAchRowStatusUsed for controlling the creation and deletion of this row.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.316.1.1.7.1.3
hwIpfpmMcpTlpTableThe table describe the TLPs(Target Logical Port) belonging to MCP ACHs.
SEQUENCE OF HwIpfpmMcpTlpEntry
.1.3.6.1.4.1.2011.5.25.316.1.1.8
hwIpfpmMcpTlpEntryIPFPM TLPs(Target Logical Port) information for a particular MCP ACH.
HwIpfpmMcpTlpEntry
.1.3.6.1.4.1.2011.5.25.316.1.1.8.1
hwIpfpmMcpTlpRoleThe object indicates the TLP belongs to 'in-group(1)' or 'out-group(2)' of the ACH.
HWIpfpmMcpTlpRole
.1.3.6.1.4.1.2011.5.25.316.1.1.8.1.1
hwIpfpmMcpTlpDcpIdThe object indicates the dcp which the tlp belongs to.
IpAddress
.1.3.6.1.4.1.2011.5.25.316.1.1.8.1.2
hwIpfpmMcpTlpIdThe object indicates the identification of the TLP.
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.1.8.1.3
hwIpfpmMcpTlpRowStatusUsed for controlling the creation and deletion of this row.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.316.1.1.8.1.4
hwIpfpmMcpSrcInstReferQueryTableThe table describes the information of multicast source instance referred by some multicast receiver instances.
SEQUENCE OF HwIpfpmMcpSrcInstReferQueryEntry
.1.3.6.1.4.1.2011.5.25.316.1.1.9
hwIpfpmMcpSrcInstReferQueryEntryThe information is that the multicast source instance referred by some multicast receiver instances.
HwIpfpmMcpSrcInstReferQueryEntry
.1.3.6.1.4.1.2011.5.25.316.1.1.9.1
hwIpfpmMcpSrcInstReferCntThe object indicates the counter that the multicast source instance referred by some multicast receiver instances.ro
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.1.9.1.1
hwIpfpmMcpStatistics
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.316.1.2
hwIpfpmMcpStatisticsTable
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.316.1.2.1
hwIpfpmMcpInstSpecThis object indicates the global instance specification of MCP.ro
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.2.1.1
hwIpfpmMcpInstCurNumThis object indicates the current instance number of MCP.ro
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.2.1.2
hwIpfpmMcpInstTlpMaxNumThis object indicates the maximum number of all instance TLP can be managed by MCP. -1 means unused of this numberro
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.2.1.3
hwIpfpmMcpAchMaxNumThis object indicates the total number of all ACH can be managed by MCP. -1 means unused of this numberro
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.2.1.4
hwIpfpmMcpInstAchIndexTableThe tables contains the index of MCP test instances and ACH.
SEQUENCE OF HwIpfpmMcpInstAchIndexEntry
.1.3.6.1.4.1.2011.5.25.316.1.2.3
hwIpfpmMcpInstAchIndexEntryIndex of a particular test instance and ACH.
HwIpfpmMcpInstAchIndexEntry
.1.3.6.1.4.1.2011.5.25.316.1.2.3.1
hwIpfpmMcpSeqNoSequence of a particular test instance and ACH.ro
Counter64
.1.3.6.1.4.1.2011.5.25.316.1.2.3.1.1
hwIpfpmMcpLossStatsTableThe tables contains loss measure statistics of MCP test instances.
SEQUENCE OF HwIpfpmMcpLossStatsEntry
.1.3.6.1.4.1.2011.5.25.316.1.2.4
hwIpfpmMcpLossStatsEntryLoss measure statistics of an interval for a particular test instance.
HwIpfpmMcpLossStatsEntry
.1.3.6.1.4.1.2011.5.25.316.1.2.4.1
hwIpfpmMcpSeqNoHighHigh 32-bit of the hwIpfpmMcpSeqNo.
Unsigned32
.1.3.6.1.4.1.2011.5.25.316.1.2.4.1.1
hwIpfpmMcpSeqNoLowLow 32-bit of the hwIpfpmMcpSeqNo.
Unsigned32
.1.3.6.1.4.1.2011.5.25.316.1.2.4.1.2
hwIpfpmMcpLossErrInfoThe error code to indicate the validity and the invalidation reason of an interval's loss measure statistics.ro
HWIpfpmStatErrInfo
.1.3.6.1.4.1.2011.5.25.316.1.2.4.1.3
hwIpfpmMcpForwardLossPktsThe absolute value of loss packets of forward flow measurement.ro
Counter64
.1.3.6.1.4.1.2011.5.25.316.1.2.4.1.4
hwIpfpmMcpForwardLossPktsSignThe sign of loss packets of forward flow measurement. 1 means positive number, -1 means negative number.ro
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.2.4.1.5
hwIpfpmMcpForwardLossBytesThe absolute value of loss bytes of forward flow measurement.ro
Counter64
.1.3.6.1.4.1.2011.5.25.316.1.2.4.1.6
hwIpfpmMcpForwardLossBytesSignThe sign of loss bytes of forward flow measurement. 1 means positive number, -1 means negative number.ro
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.2.4.1.7
hwIpfpmMcpForwardPktsThe packets of forward flow measurement.ro
Counter64
.1.3.6.1.4.1.2011.5.25.316.1.2.4.1.8
hwIpfpmMcpForwardBytesThe bytes of forward flow measurement.ro
Counter64
.1.3.6.1.4.1.2011.5.25.316.1.2.4.1.9
hwIpfpmMcpForwardLossRatioThis value divided by 1000000 is the loss ratio(%) of forward flow measurement.ro
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.2.4.1.10
hwIpfpmMcpBackwardLossPktsThe absolute value of loss packets of backward flow measurement.ro
Counter64
.1.3.6.1.4.1.2011.5.25.316.1.2.4.1.11
hwIpfpmMcpBackwardLossPktsSignThe sign of loss loss packets of backward flow measurement. 1 means positive number, -1 means negative number.ro
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.2.4.1.12
hwIpfpmMcpBackwardLossBytesThe absolute value of loss bytes of backward flow measurement.ro
Counter64
.1.3.6.1.4.1.2011.5.25.316.1.2.4.1.13
hwIpfpmMcpBackwardLossBytesSignThe sign of loss bytes of backward flow measurement. 1 means positive number, -1 means negative number.ro
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.2.4.1.14
hwIpfpmMcpBackwardPktsThe packets of backward flow measurement.ro
Counter64
.1.3.6.1.4.1.2011.5.25.316.1.2.4.1.15
hwIpfpmMcpBackwardBytesThe bytes of backward flow measurement.ro
Counter64
.1.3.6.1.4.1.2011.5.25.316.1.2.4.1.16
hwIpfpmMcpBackwardLossRatioThis value divided by 1000000 is the loss ratio(%) of backward flow measurement.ro
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.2.4.1.17
hwIpfpmMcpForwardLossMMSTypeThis value indicate multicastsrc type is 'master(0)' or 'slave(1)'.ro
HWIpfpmMMSType
.1.3.6.1.4.1.2011.5.25.316.1.2.4.1.18
hwIpfpmMcpForwardLossMMSSwitchThis value indicate whether multicastsrc switched in this period.ro
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.316.1.2.4.1.19
hwIpfpmMcpOneDelayStatTableThe tables contains one-way delay measure statistics of MCP test instances.
SEQUENCE OF HwIpfpmMcpOneDelayStatEntry
.1.3.6.1.4.1.2011.5.25.316.1.2.5
hwIpfpmMcpOneDelayStatEntryOne-way delay measure statistics of an interval for a particular test instance.
HwIpfpmMcpOneDelayStatEntry
.1.3.6.1.4.1.2011.5.25.316.1.2.5.1
hwIpfpmMcpOneDelayErrInfoThe error code to indicate the validity and the invalidation reason of an interval's one-way delay measure statistics.ro
HWIpfpmStatErrInfo
.1.3.6.1.4.1.2011.5.25.316.1.2.5.1.1
hwIpfpmMcpForwardOneDelayThe one-way delay(us) of forward flow.ro
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.2.5.1.2
hwIpfpmMcpForwardOneDelayVariationThe one-way delay variation(us) of forward flow.ro
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.2.5.1.3
hwIpfpmMcpBackwardOneDelayThe one-way delay(us) of backward flow.ro
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.2.5.1.4
hwIpfpmMcpBackwardOneDelayVariationThe one-way delay variation(us) of backward flow.ro
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.2.5.1.5
hwIpfpmMcpForwardOneDelayMMSTypeThis value indicate multicastsrc type is 'master(0)' or 'slave(1)'.ro
HWIpfpmMMSType
.1.3.6.1.4.1.2011.5.25.316.1.2.5.1.6
hwIpfpmMcpTwoDelayStatTableThe tables contains two-way delay measure statistics of MCP test instances.
SEQUENCE OF HwIpfpmMcpTwoDelayStatEntry
.1.3.6.1.4.1.2011.5.25.316.1.2.6
hwIpfpmMcpTwoDelayStatEntryTwo-way delay measure statistics of an interval for a particular test instance.
HwIpfpmMcpTwoDelayStatEntry
.1.3.6.1.4.1.2011.5.25.316.1.2.6.1
hwIpfpmMcpTwoDelayErrInfoThe error code to indicate the validity and the invalidation reason of an interval's two-way delay measure statistics.ro
HWIpfpmStatErrInfo
.1.3.6.1.4.1.2011.5.25.316.1.2.6.1.1
hwIpfpmMcpTwoDelayThe two-way delay(us) of monitored flow.ro
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.2.6.1.2
hwIpfpmMcpTwoDelayVariationThe two-way delay variation(us) of monitored flow.ro
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.2.6.1.3
hwIpfpmMcpForwardDelayThe forward flow delay(us) in two-way delay measurement.ro
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.2.6.1.4
hwIpfpmMcpForwardDelayVariationThe forward flow variation(us) in two-way delay measurement.ro
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.2.6.1.5
hwIpfpmMcpBackwardDelayThe backward flow delay(us) in two-way delay measurement.ro
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.2.6.1.6
hwIpfpmMcpBackwardDelayVariationThe backward flow variation(us) in two-way delay measurement.ro
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.2.6.1.7
hwIpfpmMcpOneDelayMultiStatTableThe tables contains multi-in-point one-way delay measure statistics of MCP test instances.
SEQUENCE OF HwIpfpmMcpOneDelayMultiStatEntry
.1.3.6.1.4.1.2011.5.25.316.1.2.7
hwIpfpmMcpOneDelayMultiStatEntryMulti-in-point one-way delay measure statistics of an interval for a particular test instance.
HwIpfpmMcpOneDelayMultiStatEntry
.1.3.6.1.4.1.2011.5.25.316.1.2.7.1
hwIpfpmMcpOneDelayFlowTypeThe flow type for multi-in-point one-delay.
HWIpfpmMcpFlowType
.1.3.6.1.4.1.2011.5.25.316.1.2.7.1.1
hwIpfpmMcpOneDelayMultiSrcDCPThe multi-in-point one-way delay source DCP.
IpAddress
.1.3.6.1.4.1.2011.5.25.316.1.2.7.1.2
hwIpfpmMcpOneDelayMultiSrcTLPThe multi-in-point one-way delay source TLP.
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.2.7.1.3
hwIpfpmMcpOneDelayMultiDesDCPThe multi-in-point one-way delay destination DCP.
IpAddress
.1.3.6.1.4.1.2011.5.25.316.1.2.7.1.4
hwIpfpmMcpOneDelayMultiDesTLPThe multi-in-point one-way delay destination TLP.
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.2.7.1.5
hwIpfpmMcpOneDelayMultiErrInfoThe error code to indicate the validity and the invalidation reason of an interval's multi-in-point one-way delay measure statistics.ro
HWIpfpmStatErrInfo
.1.3.6.1.4.1.2011.5.25.316.1.2.7.1.6
hwIpfpmMcpOneDelayMultiThe multi-in-point one-way delay(us).ro
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.2.7.1.7
hwIpfpmMcpOneDelayMultiVariationThe multi-in-point one-way delay variation(us).ro
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.2.7.1.8
hwIpfpmMcpTwoDelayMultiStatTableThe tables contains multi-in-point two-way delay measure statistics of MCP test instances.
SEQUENCE OF HwIpfpmMcpTwoDelayMultiStatEntry
.1.3.6.1.4.1.2011.5.25.316.1.2.8
hwIpfpmMcpTwoDelayMultiStatEntryMulti-in-point two-way delay measure statistics of an interval for a particular test instance.
HwIpfpmMcpTwoDelayMultiStatEntry
.1.3.6.1.4.1.2011.5.25.316.1.2.8.1
hwIpfpmMcpForwardDelayMultiSrcDCPThe multi-in-point two-way delay source DCP of forward flow.
IpAddress
.1.3.6.1.4.1.2011.5.25.316.1.2.8.1.1
hwIpfpmMcpForwardDelayMultiSrcTLPThe multi-in-point two-way delay source TLP of forward flow.
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.2.8.1.2
hwIpfpmMcpForwardDelayMultiDesDCPThe multi-in-point two-way delay destination DCP of forward flow.
IpAddress
.1.3.6.1.4.1.2011.5.25.316.1.2.8.1.3
hwIpfpmMcpForwardDelayMultiDesTLPThe multi-in-point two-way delay destination TLP of forward flow.
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.2.8.1.4
hwIpfpmMcpBackwardDelayMultiSrcDCPThe multi-in-point two-way delay source DCP of backward flow.
IpAddress
.1.3.6.1.4.1.2011.5.25.316.1.2.8.1.5
hwIpfpmMcpBackwardDelayMultiSrcTLPThe multi-in-point two-way delay source TLP of backward flow.
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.2.8.1.6
hwIpfpmMcpBackwardDelayMultiDesDCPThe multi-in-point two-way delay destination DCP of backward flow.
IpAddress
.1.3.6.1.4.1.2011.5.25.316.1.2.8.1.7
hwIpfpmMcpBackwardDelayMultiDesTLPThe multi-in-point two-way delay destination TLP of backward flow.
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.2.8.1.8
hwIpfpmMcpTwoDelayMultiErrInfoThe error code to indicate the validity and the invalidation reason of an interval's multi-in-point two-way delay measure statistics.ro
HWIpfpmStatErrInfo
.1.3.6.1.4.1.2011.5.25.316.1.2.8.1.9
hwIpfpmMcpTwoDelayMultiThe multi-in-point two-way delay(us) of monitored flow.ro
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.2.8.1.10
hwIpfpmMcpTwoDelayMultiVariationThe multi-in-point two-way delay variation(us) of monitored flow.ro
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.2.8.1.11
hwIpfpmMcpForwardDelayMultiThe forward flow delay(us) in multi-in-point two-way delay measurement.ro
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.2.8.1.12
hwIpfpmMcpForwardDelayMultiVariationThe forward flow variation(us) in multi-in-point two-way delay measurement.ro
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.2.8.1.13
hwIpfpmMcpBackwardDelayMultiThe backward flow delay(us) in multi-in-point two-way delay measurement.ro
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.2.8.1.14
hwIpfpmMcpBackwardDelayMultiVariationThe backward flow variation(us) in multi-in-point two-way delay measurement.ro
Integer32
.1.3.6.1.4.1.2011.5.25.316.1.2.8.1.15
hwIpfpmDcpObjects
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.316.2
hwIpfpmDcpConfiguration
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.316.2.1
hwIpfpmDcpGlobalTable
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.316.2.1.1
hwIpfpmDcpEnableThis object indicates that the DCP (Data Collecting Point) function is 'enabled(1)' or 'disabled(2)'.rw
HWEnabledStatus
.1.3.6.1.4.1.2011.5.25.316.2.1.1.1
hwIpfpmDcpIdThe value of this object indicates the identification of DCP. The value 0.0.0.0 represents that it is not configured.rw
IpAddress
.1.3.6.1.4.1.2011.5.25.316.2.1.1.2
hwIpfpmDcpMeasureColorFlagThis string object indicates the bits of an IP packet used for color measurement. the length of string is 3,first and second character range is <1-6>, third character range is <0-6>. the three characters can not same. The character '0' represents none flag bit. The character '1' represents the bit0 of the FLAGS byte. The character '2' represents the bit3 of the TOS byte. The character '3' represents the bit4 of the TOS byte. The character '4' represents the bit5 of the TOS byte. The character '5' represents the bit6 of the TOS byte. The character '6' represents the bit7 of the TOS byte. the first character represents loss measurement color-bit, the second character represents delay measurement color-bit, the third character represents multicast measurement color-bit.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.316.2.1.1.3
hwIpfpmDcpMcpIdIdentification of the MCP that DCP reports measure data of the test instances not specified the object 'hwIpfpmDcpInstMcpId' to. The value 0.0.0.0 represents that it is not configured.rw
IpAddress
.1.3.6.1.4.1.2011.5.25.316.2.1.1.6
hwIpfpmDcpMcpPortThe listening port of the MCP that DCP reports measure data of the test instances not specified the object 'hwIpfpmDcpInstMcpPort' to. It need setting 'hwIpfpmDcpMcpId' first before setting this object.rw
Integer32
.1.3.6.1.4.1.2011.5.25.316.2.1.1.7
hwIpfpmDcpMcpVpnNameThe name of the VPN instance through which the DCP and the MCP communicates. 'hwIpfpmDcpInstMcpId' should be setted first before setting this object.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.316.2.1.1.8
hwIpfpmDcpMcpVpnTypeThe type of the VPN instance. 'hwIpfpmDcpInstMcpId' should be setted first before setting this object.rw
HWIpfpmVpnType
.1.3.6.1.4.1.2011.5.25.316.2.1.1.9
hwIpfpmPeriodSourceThe clock source using by period.Priority should be given to the use of this setting in period calculation.rw
HWIpfpmClockSoure
.1.3.6.1.4.1.2011.5.25.316.2.1.1.10
hwIpfpmDcpAuthTableThe table contains authentication of DCP.
SEQUENCE OF HwIpfpmDcpAuthEntry
.1.3.6.1.4.1.2011.5.25.316.2.1.7
hwIpfpmDcpAuthEntryIPFPM authentication information for DCP
HwIpfpmDcpAuthEntry
.1.3.6.1.4.1.2011.5.25.316.2.1.7.1
hwIpfpmDcpAuthKeyIdIdentification of the DCP authentication.
Integer32
.1.3.6.1.4.1.2011.5.25.316.2.1.7.1.1
hwIpfpmDcpAuthTypeAuthentication type of the DCP. The enumeration 'hmac-sha256(1)' represents the password is sent after being encrypted through hmac-sha256. By default, authentication is not configured.rw
HWIpfpmAuthType
.1.3.6.1.4.1.2011.5.25.316.2.1.7.1.2
hwIpfpmDcpAuthKeyThe password used as an IPFPM authentication key.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.316.2.1.7.1.3
hwIpfpmDcpAuthRowStatusUsed for controlling the creation and deletion of this row.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.316.2.1.7.1.4
hwIpfpmDcpInstTableThe table contains attribute of DCP test instances.
SEQUENCE OF HwIpfpmDcpInstEntry
.1.3.6.1.4.1.2011.5.25.316.2.1.8
hwIpfpmDcpInstEntryIPFPM configuration information for a particular DCP test instance.
HwIpfpmDcpInstEntry
.1.3.6.1.4.1.2011.5.25.316.2.1.8.1
hwIpfpmDcpInstIdIdentification of the test instance.ro
Integer32 (1..8355838|16711681..16777214)
.1.3.6.1.4.1.2011.5.25.316.2.1.8.1.1
hwIpfpmDcpInstDescDescription of the test instance. if the string length is 0, it represents that it is not configured.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.316.2.1.8.1.2
hwIpfpmDcpInstMcpIdIdentification of the MCP that DCP reports measure data of this test instance to. The value 0.0.0.0 represents that it is not configuredrw
IpAddress
.1.3.6.1.4.1.2011.5.25.316.2.1.8.1.3
hwIpfpmDcpInstMcpPortThe listening port of the MCP that DCP reports measure data of this test instance to. It need setting 'hwIpfpmDcpInstMcpId' first before setting this object.rw
Integer32
.1.3.6.1.4.1.2011.5.25.316.2.1.8.1.4
hwIpfpmDcpInstIntervalThis object indicates that interval of an test instance is 'interval1s(1)' or 'interval10s(10)' or 'interval60s(60)' or 'interval600s(600)'.rw
HWIpfpmInstIntervalType
.1.3.6.1.4.1.2011.5.25.316.2.1.8.1.5
hwIpfpmDcpInstRowStatusUsed for controlling the creation and deletion of this row.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.316.2.1.8.1.6
hwIpfpmDcpInstTypetype of the test instance.rw
HWIpfpmInstType
.1.3.6.1.4.1.2011.5.25.316.2.1.8.1.7
hwIpfpmDcpSourceInstIdIdentification of the source instance.rw
Integer32(0 | 16711681..16777214)
.1.3.6.1.4.1.2011.5.25.316.2.1.8.1.8
hwIpfpmDcpInstMcpVpnNameThe name of the VPN instance through which the DCP and the MCP communicates. 'hwIpfpmDcpInstMcpId' should be setted first before setting this object.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.316.2.1.8.1.9
hwIpfpmDcpInstMcpVpnTypeThe type of the VPN instance. 'hwIpfpmDcpInstMcpId' should be setted first before setting this object.rw
HWIpfpmVpnType
.1.3.6.1.4.1.2011.5.25.316.2.1.8.1.10
hwIpfpmDcpInstGroupIdThe group identification of the test instance.rw
Integer32
.1.3.6.1.4.1.2011.5.25.316.2.1.8.1.11
hwIpfpmDcpInstAuthTableThe table contains authentication of DCP test instances.
SEQUENCE OF HwIpfpmDcpInstAuthEntry
.1.3.6.1.4.1.2011.5.25.316.2.1.9
hwIpfpmDcpInstAuthEntryIPFPM authentication information for a particular DCP test instance.
HwIpfpmDcpInstAuthEntry
.1.3.6.1.4.1.2011.5.25.316.2.1.9.1
hwIpfpmDcpInstAuthKeyIdIdentification of the DCP authentication.
Integer32
.1.3.6.1.4.1.2011.5.25.316.2.1.9.1.1
hwIpfpmDcpInstAuthTypeAuthentication type of DCP instance authentication. The enumeration 'hmac-sha256(1)' represents the password is sent after being encrypted through hmac-sha256. By default, authentication is not configured. If this object is not configured and object 'hwIpfpmDcpAuthType' is configured, then this instance uses 'hwIpfpmDcpInstAuthType' and 'hwIpfpmDcpInstAuthKey' as its authentication.rw
HWIpfpmAuthType
.1.3.6.1.4.1.2011.5.25.316.2.1.9.1.2
hwIpfpmDcpInstAuthKeyThe password used as an DCP test instance authentication key.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.316.2.1.9.1.3
hwIpfpmDcpInstAuthRowStatusUsed for controlling the creation and deletion of this row.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.316.2.1.9.1.4
hwIpfpmDcpFlowTableThe table contains flow attribute of DCP test instances.
SEQUENCE OF HwIpfpmDcpFlowEntry
.1.3.6.1.4.1.2011.5.25.316.2.1.10
hwIpfpmDcpFlowEntryIPFPM configuration information for a particular DCP test instance flow.
HwIpfpmDcpFlowEntry
.1.3.6.1.4.1.2011.5.25.316.2.1.10.1
hwIpfpmDcpFlowTypeThis object indicates that the flow is 'forward(1)' or 'backward(2)' or 'bidirectional(3)'.ro
HWIpfpmFlowType
.1.3.6.1.4.1.2011.5.25.316.2.1.10.1.1
hwIpfpmDcpFlowProtocolThis object indicates the protocol specified as the flow feature. 'hwIpfpmDcpFlowSrcPortBgn', 'hwIpfpmDcpFlowSrcPortEnd', 'hwIpfpmDcpFlowDstPortBgn', and 'hwIpfpmDcpFlowDstPortEnd' can be configured only when the value is 6(tcp) or 17(udp). The value 0 represents that this object is not configured.rw
Integer32
.1.3.6.1.4.1.2011.5.25.316.2.1.10.1.2
hwIpfpmDcpFlowDscpThis object indicates the DSCP specified as the flow feature. The value -1 represents that this object is not configured.rw
Integer32(-1..63)
.1.3.6.1.4.1.2011.5.25.316.2.1.10.1.3
hwIpfpmDcpFlowSrcAddrThis object indicates the source ip address specified as the flow feature. The value 0.0.0.0 represents that this object is not configured.rw
IpAddress
.1.3.6.1.4.1.2011.5.25.316.2.1.10.1.4
hwIpfpmDcpFlowSrcMaskLenThis object indicates the source ip mask length specified as the flow feature.rw
Integer32
.1.3.6.1.4.1.2011.5.25.316.2.1.10.1.5
hwIpfpmDcpFlowDstAddrThis object indicates the destination ip address specified as the flow feature. The value 0.0.0.0 represents that this object is not configured.rw
IpAddress
.1.3.6.1.4.1.2011.5.25.316.2.1.10.1.6
hwIpfpmDcpFlowDstMaskLenThis object indicates the destination ip mask length specified as the flow feature.rw
Integer32
.1.3.6.1.4.1.2011.5.25.316.2.1.10.1.7
hwIpfpmDcpFlowSrcPortBgnThis object indicates the begin value of source port specified as the flow feature. It need configure 'hwIpfpmDcpFlowProtocol' first before configure this object. The value 0 represents that this object is not configured.rw
Integer32
.1.3.6.1.4.1.2011.5.25.316.2.1.10.1.8
hwIpfpmDcpFlowSrcPortEndThis object indicates the end value of source port specified as the flow feature. It need configure 'hwIpfpmDcpFlowProtocol' first before configure this object. The value 0 represents that this object is not configured.rw
Integer32
.1.3.6.1.4.1.2011.5.25.316.2.1.10.1.9
hwIpfpmDcpFlowDstPortBgnThis object indicates the begin value of destination port specified as the flow feature. It need configure 'hwIpfpmDcpFlowProtocol' first before configure this object. The value 0 represents that this object is not configured.rw
Integer32
.1.3.6.1.4.1.2011.5.25.316.2.1.10.1.10
hwIpfpmDcpFlowDstPortEndThis object indicates the end value of destination port specified as the flow feature. It need configure 'hwIpfpmDcpFlowProtocol' first before configure this object. The value 0 represents that this object is not configured.rw
Integer32
.1.3.6.1.4.1.2011.5.25.316.2.1.10.1.11
hwIpfpmDcpFlowRowStatusUsed for controlling the creation and deletion of this row.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.316.2.1.10.1.12
hwIpfpmDcpFlowOuterSrcAddrThis object indicates the outer source ip address specified as the flow feature. The value 0 represents that this object is not configured.rw
IpAddress
.1.3.6.1.4.1.2011.5.25.316.2.1.10.1.13
hwIpfpmDcpFlowOuterDstAddrThis object indicates the outer destination ip address specified as the flow feature. The value 0 represents that this object is not configured.rw
IpAddress
.1.3.6.1.4.1.2011.5.25.316.2.1.10.1.14
hwIpfpmDcpFlowForwardGtpTeidThis object indicates the value of forward gtp teid specified as the flow feature. The value 0 represents that this object is not configured.rw
Unsigned32
.1.3.6.1.4.1.2011.5.25.316.2.1.10.1.15
hwIpfpmDcpFlowBackwardGtpTeidThis object indicates the value of backward gtp teid specified as the flow feature. The value 0 represents that this object is not configured.rw
Unsigned32
.1.3.6.1.4.1.2011.5.25.316.2.1.10.1.16
hwIpfpmDcpFlowVxlanThe Vxlan of the flow feature. The value false(2) represents that this object is not configured.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.316.2.1.10.1.17
hwIpfpmDcpFlowVniThis object indicates the value of vni specified as the flow feature. The value 0 represents that this object is not configured.rw
Integer32
.1.3.6.1.4.1.2011.5.25.316.2.1.10.1.18
hwIpfpmDcpInstTlpTableThe table contains attribute of TLPs.
SEQUENCE OF HwIpfpmDcpInstTlpEntry
.1.3.6.1.4.1.2011.5.25.316.2.1.11
hwIpfpmDcpInstTlpEntryIPFPM configuration information for a particular TLP.
HwIpfpmDcpInstTlpEntry
.1.3.6.1.4.1.2011.5.25.316.2.1.11.1
hwIpfpmDcpInstTlpRoleThe object indicates the TLP position 'in-point(1)' or 'out-point(2) or 'mid-point(3)'.rw
HWIpfpmTlpRole
.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.1
hwIpfpmDcpInstTlpFlowTypeThe object indicates the flow type of the instance TLP is 'forward(1)' or 'backward(2)' or 'bidirectional(3)' or 'forwardandbackward(4)'. Only 'forward(1)' and 'backward(2)' can be configured when 'hwIpfpmDcpInstTlpRole' is 'mid-point(3)'. The value 'null(0)' represents that this flow is not configured under the instance.rw
HWIpfpmFlowType
.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.2
hwIpfpmDcpInstTlpDirecThe object indicates the TLP is 'ingress(1)' or 'egress(2)' of the flow of DCP test instance.rw
HWIpfpmFlowTlpDirec
.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.3
hwIpfpmDcpInstTlpVpnLabelThe VPN label of of the flow that the TLP measured. The value -1 represents that this object is not configured.rw
Integer32(-1..1048575)
.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.4
hwIpfpmDcpInstTlpCtrlWordFlagThe control word flag of the flow that the TLP measured. The value false(2) represents that this object is not configured.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.5
hwIpfpmDcpInstTlpLspLabelThe LSP label of the flow that the TLP measured. The value -1 represents that this object is not configured.rw
Integer32(-1..1048575)
.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.6
hwIpfpmDcpInstTlpL2VpnFlagThe L2VPN flag of the flow that the TLP measured. The value false(2) represents that this object is not configured.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.7
hwIpfpmDcpInstTlpTpIdThe tpid for vlan. The value range is from '600' to 'FFFF'.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.8
hwIpfpmDcpInstTlpRowStatusUsed for controlling the creation and deletion of this row.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.9
hwIpfpmDcpInstTlpMultiSrcTypeThe object indicates the type of multicastsrc 'master(0)'or 'slave(1)'.rw
HWIpfpmMMSType
.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.10
hwIpfpmDcpInstTlpFlowLabelFlagThis value indicate whether the flow-label is configured.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.11
hwIpfpmDcpInstTlpLspLabel2The LSP label of the flow that the TLP measured. The value -1 represents that this object is not configured. The value -2 represents that this object matches any label.rw
Integer32(-2..1048575)
.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.12
hwIpfpmDcpInstTlpLspLabel3The LSP label of the flow that the TLP measured. The value -1 represents that this object is not configured.rw
Integer32(-1..1048575)
.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.13
hwIpfpmDcpInstTlpOuterVlanThe outer-vlan id of the flow that the TLP measured. The value 0 represents that this object is not configured.rw
Integer32
.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.14
hwIpfpmDcpInstTlpInnerVlanThe inner-vlan id of the flow that the TLP measured. The value 0 represents that this object is not configured.rw
Integer32
.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.15
hwIpfpmDcpInstTlpBackwardVpnLabelThe VPN label of of the flow that the TLP measured. The value -1 represents that this object is not configured.rw
Integer32(-1..1048575)
.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.16
hwIpfpmDcpInstTlpBackwardCtrlWordFlagThe control word flag of the flow that the TLP measured. The value false(2) represents that this object is not configured.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.17
hwIpfpmDcpInstTlpBackwardLspLabelThe LSP label of the flow that the TLP measured. The value -1 represents that this object is not configured.rw
Integer32(-1..1048575)
.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.18
hwIpfpmDcpInstTlpBackwardLspLabel2The LSP label of the flow that the TLP measured. The value -1 represents that this object is not configured. The value -2 represents that this object matches any label.rw
Integer32(-2..1048575)
.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.19
hwIpfpmDcpInstTlpBackwardLspLabel3The LSP label of the flow that the TLP measured. The value -1 represents that this object is not configured.rw
Integer32(-1..1048575)
.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.20
hwIpfpmDcpInstTlpBackwardL2VpnFlagThe L2VPN flag of the flow that the TLP measured. The value false(2) represents that this object is not configured.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.21
hwIpfpmDcpInstTlpBackwardFlowLabelFlagThis value indicate whether the flow-label is configured.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.22
hwIpfpmDcpInstTlpBackwardOuterVlanThe outer-vlan id of the flow that the TLP measured. The value 0 represents that this object is not configured.rw
Integer32
.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.23
hwIpfpmDcpInstTlpBackwardInnerVlanThe inner-vlan id of the flow that the TLP measured. The value 0 represents that this object is not configured.rw
Integer32
.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.24
hwIpfpmDcpInstTlpBackwardTpIdThe tpid for vlan. The value range is from '600' to 'FFFF'.rw
OCTET STRING
.1.3.6.1.4.1.2011.5.25.316.2.1.11.1.25
hwIpfpmDcpLossMeasTableThe table contains loss measure information of DCP test instances.
SEQUENCE OF HwIpfpmDcpLossMeasEntry
.1.3.6.1.4.1.2011.5.25.316.2.1.12
hwIpfpmDcpLossMeasEntryIPFPM loss measure configuration information for a particular DCP test instance.
HwIpfpmDcpLossMeasEntry
.1.3.6.1.4.1.2011.5.25.316.2.1.12.1
hwIpfpmDcpLossEnableThis object indicates that the on-demand loss measure function is 'enabled(1)' or 'disabled(2)'.rw
HWEnabledStatus
.1.3.6.1.4.1.2011.5.25.316.2.1.12.1.1
hwIpfpmDcpLossContEnableThis object indicates that the continual loss measure function is 'enabled(1)' or 'disabled(2)'.rw
HWEnabledStatus
.1.3.6.1.4.1.2011.5.25.316.2.1.12.1.2
hwIpfpmDcpLossTimeRangeThe time range in which the on-demand loss measure function is enabled. The enumeration values include 'timerange5m(5)', 'timerange10m(10)', 'timerange15m(15)', and 'timerange30m(30)'. The value 'null(0)' represents that this object is not configured.rw
HWIpfpmMeasTimeRangeType
.1.3.6.1.4.1.2011.5.25.316.2.1.12.1.3
hwIpfpmDcpLossTlpRoleThe type of TLP that loss measure enabled on. The enumeration values include 'e2e(1)','section(2)' . The value 'e2e(1)' represents that this object is end-end. The value 'section(2)' represents that this object is mid-point.
HWIpfpmLossTlpRole
.1.3.6.1.4.1.2011.5.25.316.2.1.12.1.4
hwIpfpmDcpDelayMeasTableThe table contains delay measure information of DCP test instances.
SEQUENCE OF HwIpfpmDcpDelayMeasEntry
.1.3.6.1.4.1.2011.5.25.316.2.1.13
hwIpfpmDcpDelayMeasEntryIPFPM delay measure configuration information for a particular DCP test instance.
HwIpfpmDcpDelayMeasEntry
.1.3.6.1.4.1.2011.5.25.316.2.1.13.1
hwIpfpmDcpDelayEnableThis object indicates that the on-demand delay measure function is 'enabled(1)' or 'disabled(2)'.rw
HWEnabledStatus
.1.3.6.1.4.1.2011.5.25.316.2.1.13.1.1
hwIpfpmDcpDelayContEnableThis object indicates that the continual delay measure function is 'enabled(1)' or 'disabled(2)'.rw
HWEnabledStatus
.1.3.6.1.4.1.2011.5.25.316.2.1.13.1.2
hwIpfpmDcpDelayMeasTypeThe type of delay measure. The enumeration values include 'oneway(1)' and 'twoway(2)'. The value 'null(0)' represents that this object is not configured.rw
HWIpfpmDelayMeasType
.1.3.6.1.4.1.2011.5.25.316.2.1.13.1.3
hwIpfpmDcpDelayTimeRangeThe time range in which the on-demand delay measure function is enabled. The enumeration values include 'timerange5m(5)', 'timerange10m(10)', 'timerange15m(15)', and 'timerange30m(30)'. The value 'null(0)' represents that this object is not configured.rw
HWIpfpmMeasTimeRangeType
.1.3.6.1.4.1.2011.5.25.316.2.1.13.1.4
hwIpfpmDcpDelayTlpRoleThe type of TLP that delay measure enabled on. The enumeration values include 'e2e(1)','section(2)' . The value 'e2e(1)' represents that this object is end-end. The value 'section(2)' represents that this object is mid-point.
HWIpfpmDelayTlpRole
.1.3.6.1.4.1.2011.5.25.316.2.1.13.1.5
hwIpfpmDcpDelayForwardTlpIdThe ingress TLP of the flow for one-way delay measure or the ingress TLP of the forward flow for two-way delay measure. The value 0 represents that this object is not configured.rw
Integer32
.1.3.6.1.4.1.2011.5.25.316.2.1.13.1.6
hwIpfpmDcpDelayBackwardTlpIdThe ingress TLP of the backward flow for two-way delay measure. The value 0 represents that this object is not configured.rw
Integer32
.1.3.6.1.4.1.2011.5.25.316.2.1.13.1.7
hwIpfpmDcpTlpTableThe table contains attribute of TLPs.
SEQUENCE OF HwIpfpmDcpTlpEntry
.1.3.6.1.4.1.2011.5.25.316.2.1.14
hwIpfpmDcpTlpEntryIPFPM configuration information for a particular TLP on interface.
HwIpfpmDcpTlpEntry
.1.3.6.1.4.1.2011.5.25.316.2.1.14.1
hwIpfpmDcpTlpIdIdentification of TLP.
Integer32
.1.3.6.1.4.1.2011.5.25.316.2.1.14.1.1
hwIpfpmDcpTlpIfIndexThe index of the port that the TLP configured on.rw
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.316.2.1.14.1.2
hwIpfpmDcpTlpRowStatusUsed for controlling the creation and deletion of this row.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.316.2.1.14.1.3
hwIpfpmDcpTlpVlanIdThe VLAN ID of the TLP measured. The value 0 represents ce-default-vlan. The value 65535 represents that this object is not configured.rw
Integer32(0..4094|65535)
.1.3.6.1.4.1.2011.5.25.316.2.1.14.1.4
hwIpfpmDcpTlpQueryTableThe table contains the query interface ifindex and TLP ID with the interface.
SEQUENCE OF HwIpfpmDcpTlpQueryEntry
.1.3.6.1.4.1.2011.5.25.316.2.1.15
hwIpfpmDcpTlpQueryEntryThe TLP information which is configured with the interface.
HwIpfpmDcpTlpQueryEntry
.1.3.6.1.4.1.2011.5.25.316.2.1.15.1
hwIpfpmDcpTlpQueryIfIndexThe interface index which is configured with TLP.
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.316.2.1.15.1.1
hwIpfpmDcpTlpQueryTlpIdThe TLP ID which is configured on the interface.ro
Integer32
.1.3.6.1.4.1.2011.5.25.316.2.1.15.1.2
hwIpfpmDcpTlpQueryVlanIdThe VLAN ID of the TLP measured. The value 0 represents ce-default-vlan. The value 65535 represents that this object is not configured.
Integer32(0..4094|65535)
.1.3.6.1.4.1.2011.5.25.316.2.1.15.1.3
hwIpfpmDcpSrcInstReferQueryTableThe table describes the information of multicast source instance referred by some multicast receiver instances.
SEQUENCE OF HwIpfpmDcpSrcInstReferQueryEntry
.1.3.6.1.4.1.2011.5.25.316.2.1.16
hwIpfpmDcpSrcInstReferQueryEntryThe information is that the multicast source instance referred by some multicast receiver instances.
HwIpfpmDcpSrcInstReferQueryEntry
.1.3.6.1.4.1.2011.5.25.316.2.1.16.1
hwIpfpmDcpSrcInstReferCntThe object indicates the counter that the multicast source instance referred by some multicast receiver instances.ro
Integer32
.1.3.6.1.4.1.2011.5.25.316.2.1.16.1.1
hwIpfpmDcpTlpQueryExtTableThe table contains the query interface ifindex and TLP ID with the interface.
SEQUENCE OF HwIpfpmDcpTlpQueryExtEntry
.1.3.6.1.4.1.2011.5.25.316.2.1.17
hwIpfpmDcpTlpQueryExtEntryThe TLP information which is configured with the interface.
HwIpfpmDcpTlpQueryExtEntry
.1.3.6.1.4.1.2011.5.25.316.2.1.17.1
hwIpfpmDcpTlpQueryExtIfIndexThe interface index which is configured with TLP.
InterfaceIndex (IF-MIB)
.1.3.6.1.4.1.2011.5.25.316.2.1.17.1.1
hwIpfpmDcpTlpQueryExtTlpIdThe TLP ID which is configured on the interface.ro
Integer32
.1.3.6.1.4.1.2011.5.25.316.2.1.17.1.2
hwIpfpmDcpTlpQueryExtVlanIdThe VLAN ID of the TLP measured. The value 0 represents ce-default-vlan. The value 65535 represents that this object is not configured.
Integer32(0..4094|65535)
.1.3.6.1.4.1.2011.5.25.316.2.1.17.1.3
hwIpfpmDcpTlpQueryExtOntIdThis object indicates the ONT ID.
Integer32
.1.3.6.1.4.1.2011.5.25.316.2.1.17.1.4
hwIpfpmDcpTlpQueryExtOntPortTypeThis object indicates the ONT port's type. Options: 1. eth (47)) -indicates ONT port's type is the eth type. 2. invalid(-1) -indicates ONT port's type is not matched.
Enumeration
.1.3.6.1.4.1.2011.5.25.316.2.1.17.1.5
hwIpfpmDcpTlpQueryExtOntPortIdThis object indicates the ONT port ID.
Integer32
.1.3.6.1.4.1.2011.5.25.316.2.1.17.1.6
hwIpfpmDcpTlpExtTableThe table contains attribute of TLPs.
SEQUENCE OF HwIpfpmDcpTlpExtEntry
.1.3.6.1.4.1.2011.5.25.316.2.1.18
hwIpfpmDcpTlpExtEntryIPFPM configuration information for a particular TLP on interface.
HwIpfpmDcpTlpExtEntry
.1.3.6.1.4.1.2011.5.25.316.2.1.18.1
hwIpfpmDcpExtTlpIdIdentification of TLP.
Integer32
.1.3.6.1.4.1.2011.5.25.316.2.1.18.1.1
hwIpfpmDcpTlpExtIfIndexThe index of the port that the TLP configured on.rw
Integer32
.1.3.6.1.4.1.2011.5.25.316.2.1.18.1.2
hwIpfpmDcpTlpExtRowStatusUsed for controlling the creation and deletion of this row.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.316.2.1.18.1.3
hwIpfpmDcpTlpExtVlanIdThe VLAN ID of the TLP measured. The value 0 represents ce-default-vlan. The value 65535 represents that this object is not configured.rw
Integer32(0..4094|65535)
.1.3.6.1.4.1.2011.5.25.316.2.1.18.1.4
hwIpfpmDcpTlpExtOntIdThis object indicates the ONT ID. The value -1 represents that this object is not configured.rw
Integer32
.1.3.6.1.4.1.2011.5.25.316.2.1.18.1.5
hwIpfpmDcpTlpExtOntPortTypeThis object indicates the ONT port's type. Options: 1. eth (47)) -indicates ONT port's type is the eth type. 2. invalid(-1) -indicates ONT port's type is not matched. DEFVAL { -1 } .rw
Enumeration
.1.3.6.1.4.1.2011.5.25.316.2.1.18.1.6
hwIpfpmDcpTlpExtOntPortIdThis object indicates the ONT port ID. The value -1 represents that this object is not configured.rw
Integer32
.1.3.6.1.4.1.2011.5.25.316.2.1.18.1.7
hwIpfpmDcpInstTlpNHTableIPFPM nexthop configuration information for a particular TLP of the test instance.
SEQUENCE OF HwIpfpmDcpInstTlpNHEntry
.1.3.6.1.4.1.2011.5.25.316.2.1.19
hwIpfpmDcpInstTlpNHEntryIPFPM nexthop configuration information for a particular TLP.
HwIpfpmDcpInstTlpNHEntry
.1.3.6.1.4.1.2011.5.25.316.2.1.19.1
hwIpfpmDcpNexthopIpThe object indicates the nexthop information for a particular TLP.
IpAddress
.1.3.6.1.4.1.2011.5.25.316.2.1.19.1.1
hwIpfpmDcpInstTlpNHRowStatusUsed for controlling the creation and deletion of this row.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.2011.5.25.316.2.1.19.1.2
hwIpfpmTraps
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.316.3
hwIpfpmLossRatioExceedA hwIpfpmLossRatioExceed trap is sent when the loss ratio of IPFPM test instance exceeds the uppper threshold in continuous five test intervals.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.316.3.1
hwIpfpmLossRatioRecoveryA hwIpfpmLossRatioRecovery trap is sent when the loss ratio of IPFPM test instance is under the lower threshold in continuous five test intervals.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.316.3.2
hwIpfpmOneDelayExceedA hwIpfpmOneDelayExceed trap is sent when the one-way delay of IPFPM test instance exceeds the uppper threshold in continuous five test intervals.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.316.3.3
hwIpfpmOneDelayRecoveryA hwIpfpmOneDelayRecovery trap is sent when the one-way delay of IPFPM test instance is under the lower threshold in continuous five test intervals.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.316.3.4
hwIpfpmTwoDelayExceedA hwIpfpmTwoDelayExceed trap is sent when the two-way delay of IPFPM test instance exceeds the uppper threshold in continuous five test intervals.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.316.3.5
hwIpfpmTwoDelayRecoveryA hwIpfpmTwoDelayRecovery trap is sent when the two-way delay of IPFPM test instance is under the lower threshold in continuous five test intervals.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.316.3.6
hwIpfpmDcpFlowConflictA hwIpfpmDcpFlowConflict trap is sent when the flow configuration conflicts with another existing flow configuration. The first hwIpfpmDcpInstId and hwIpfpmDcpFlowType indicates the specified flow. The second hwIpfpmDcpInstId and hwIpfpmDcpFlowType indicates the existing flow.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.316.3.7
hwIpfpmTlpExceedA hwIpfpmTlpExceed trap is sent when the number of board tlp exceeds the threshold.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.316.3.8
hwIpfpmTlpRecoveryA hwIpfpmTlpRecovery trap is sent when the number of board tlp is under the threshold.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.316.3.9
hwIpfpmMultiOneDelayExceedA hwIpfpmMultiOneDelayExceed trap is sent when the one-way delay of IPFPM test instance exceeds the uppper threshold in continuous five test intervals. This trap supports multi one-way delay for a period.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.316.3.10
hwIpfpmMultiOneDelayRecoveryA hwIpfpmMultiOneDelayRecovery trap is sent when the one-way delay of IPFPM test instance is under the lower threshold in continuous five test intervals.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.316.3.11
hwIpfpmMultiTwoDelayExceedA hwIpfpmMultiTwoDelayExceed trap is sent when the two-way delay of IPFPM test instance exceeds the uppper threshold in continuous five test intervals. This trap supports multi two-way delay for a period.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.316.3.12
hwIpfpmMultiTwoDelayRecoveryA hwIpfpmMultiTwoDelayRecovery trap is sent when the two-way delay of IPFPM test instance is under the lower threshold in continuous five test intervals.
NOTIFICATION-TYPE
.1.3.6.1.4.1.2011.5.25.316.3.13
hwIpfpmConformance
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.316.4
hwIpfpmCompliances
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.316.4.1
hwIpfpmGroups
OBJECT IDENTIFIER
.1.3.6.1.4.1.2011.5.25.316.4.2
hwIpfpmTlpExceedBoardIdThe board ID that the tlp exceed the threshold.ro
Integer32
.hwIpfpmDcpTrapObjects.1
hwIpfpmTlpNumberThe number of tlp.ro
Integer32
.hwIpfpmDcpTrapObjects.2
hwIpfpmTlpThresholdThe threshold of tlp.ro
Integer32
.hwIpfpmDcpTrapObjects.3
HUAWEI-IPFPM-MIB - SNMP MIB Reference | MIBs Explorer