HUAWEI-HGMP-MIB
AI MIB Summary
The HUAWEI-HGMP-MIB facilitates the monitoring and management of Huawei cluster and stack configurations, Neighbor Discovery Protocol (NDP) states, and Network Topology Discovery Protocol (NTDP) topology data. It enables the collection of specific metrics regarding device membership, stack synchronization status, and dynamic network topology changes within Huawei proprietary environments.
HUAWEI-HGMP-MIB is defined and owned by Huawei. This MIB includes four parts: the cluster, stack, Neighbor Discovery Protocol (NDP), and Network Topology Discovery Protocol (NTDP). This MIB can monitor the cluster, stack and topology collection.
Main OID:
hwCluster.1.3.6.1.4.1.2011.6.7
203
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
203 total| Object Name |
|---|
hwClusterHUAWEI-HGMP-MIB is defined and owned by Huawei.
This MIB includes four parts: the cluster, stack, Neighbor Discovery Protocol (NDP),
and Network Topology Discovery Protocol (NTDP).
This MIB can monitor the cluster, stack and topology collection. MODULE-IDENTITY .1.3.6.1.4.1.2011.6.7 |
hwClusterObject OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.7.1 |
hgmpEventsV2 OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.7.1.0 |
hgmpMemberfailureWhen a cluster member failed,
send an SNMP trap to the network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.7.1.0.1 |
hgmpMemberRecoverWhen a cluster member recovered,
send an SNMP trap to the network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.7.1.0.2 |
hgmpMemberStatusChangeWhen a cluster member status changed,
send an SNMP trap to the network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.7.1.0.3 |
hgmpNetTopChangeWhen net topology of this cluster change, send a snmp trap
to the network management. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.7.1.0.4 |
hgmpMemberAddWhen a cluster member added,
send an SNMP trap to the network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.7.1.0.6 |
hgmpSetVLANSecurityConfigure whether to perform the VLAN check inside the cluster. The default value is noSecurity(0).rw Enumeration .1.3.6.1.4.1.2011.6.7.1.1 |
hgmpHandShakeIntervalHandshaking interval of the cluster member switches. The default value is 10.rw Integer32 .1.3.6.1.4.1.2011.6.7.1.2 |
hgmpHandShakeHoldtimeHoldtime of command switch and member switch in the cluster. The default value is 60.rw Integer32 .1.3.6.1.4.1.2011.6.7.1.3 |
hgmpGrpMemberTableChangeAdd 1 to the member list after it changes. The administrator checks if the value has changed. If not, it will not read the list once more. The default value is 0.ro Integer32 .1.3.6.1.4.1.2011.6.7.1.4 |
hgmpMemberDisconRateDisconnection times of the member and command switches divided by member number times 1000. The default value is 0.ro Integer32 .1.3.6.1.4.1.2011.6.7.1.5 |
hgmpCmdLanswitchFlagCommand switch flag. The default value is false(0). If the value is set to 1, the cluster name is 'huawei' by default.rw Enumeration .1.3.6.1.4.1.2011.6.7.1.6 |
hgmpCmdClusterNameCluster name of the command switch.rw OCTET STRING .1.3.6.1.4.1.2011.6.7.1.7 |
hgmpMngPriIpSegCMIPThe private management IP address of the command switch, which cannot be modified after the cluster has been created. The default value is '0.0.0.0'.rw IpAddress .1.3.6.1.4.1.2011.6.7.1.8 |
hgmpMngPriIpMaskThe private management IP address mask assigned by the command switch, which cannot be modified after the cluster has been created. The default value is '0.0.0.0'.rw IpAddress .1.3.6.1.4.1.2011.6.7.1.9 |
hgmpFtpServerThe cluster members can access the FTP Server through the command switch, which can only be configured and accessed on the command switch. The default value is '0.0.0.0'.rw IpAddress .1.3.6.1.4.1.2011.6.7.1.10 |
hgmpTftpServerThe cluster members can access the TFTP Server through the command switch, which can only be configured and accessed on the command switch. The default value is '0.0.0.0'.rw IpAddress .1.3.6.1.4.1.2011.6.7.1.11 |
hgmpSnmpHostThe Snmp Host to send the cluster trap packets, which can only be configured and accessed on the command switch. The default value is '0.0.0.0'.rw IpAddress .1.3.6.1.4.1.2011.6.7.1.12 |
hgmpLogHostLog host of the cluster, which can only be configured and accessed on the command switch. The default value is '0.0.0.0'.rw IpAddress .1.3.6.1.4.1.2011.6.7.1.13 |
hgmpGrpMemberTableTable of cluster member switches. SEQUENCE OF HgmpGrpMemberEntry .1.3.6.1.4.1.2011.6.7.1.14 |
hgmpGrpMemberEntryProvides information about cluster member entry. HgmpGrpMemberEntry .1.3.6.1.4.1.2011.6.7.1.14.1 |
hgmpGrpMemberDeviceId2 bytes address type of the member switch + 2 bytes /0 + MAC address, comprising a character string of hexadecimal numbers.ro OCTET STRING .1.3.6.1.4.1.2011.6.7.1.14.1.1 |
hgmpGrpMemberSerialWhen adding member switch to the cluster, the command switch will assign an unique integer to identify it.ro Integer32 .1.3.6.1.4.1.2011.6.7.1.14.1.2 |
hgmpGrpMemberIpAddrThe private IP addresses of the member switches for communication inside the cluster.ro IpAddress .1.3.6.1.4.1.2011.6.7.1.14.1.3 |
hgmpGrpMemberNameHostname of the member switch.ro OCTET STRING .1.3.6.1.4.1.2011.6.7.1.14.1.4 |
hgmpGrpMemberPasswordMember password for joining a cluster.rw OCTET STRING .1.3.6.1.4.1.2011.6.7.1.14.1.5 |
hgmpGrpMemberPlatformSet the hardware platform. A null string indicates the information does not exist in the device adjacency table.ro OCTET STRING .1.3.6.1.4.1.2011.6.7.1.14.1.6 |
hgmpGrpMemberStatusMember status on the command switch, used for displaying the network management status.ro Enumeration .1.3.6.1.4.1.2011.6.7.1.14.1.7 |
hgmpGrpMemberDisconCountCount of inside communication disconnections between the member switch and the command switch.ro Integer32 .1.3.6.1.4.1.2011.6.7.1.14.1.8 |
hgmpGrpMemberEnrollTimeEnrollment time of the member, measured in seconds.ro Integer32 .1.3.6.1.4.1.2011.6.7.1.14.1.9 |
hgmpGrpMemberOperateOperation indication field, indicating the operation of adding/removing a member by the network management agent and the status of current line.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.7.1.14.1.10 |
hgmpMemberResetTableReset a member switch in the cluster. SEQUENCE OF HgmpMemberResetEntry .1.3.6.1.4.1.2011.6.7.1.15 |
hgmpMemberResetEntryProvides information about resetting member entry. HgmpMemberResetEntry .1.3.6.1.4.1.2011.6.7.1.15.1 |
hgmpMemberResetMACThe management MAC address of the switch to be reset, which is the unique identifier of the switch.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.6.7.1.15.1.1 |
hgmpMemberEraseflashWhether to erase the configuration file from the flash after resetting a switch. When this node is read, cannotget(65535) will be returned.rw Enumeration .1.3.6.1.4.1.2011.6.7.1.15.1.2 |
hgmpClusterRoleRole of this switch in a cluster.ro Enumeration .1.3.6.1.4.1.2011.6.7.1.16 |
hgmpClusterMaxPoolNumMaximum switch members that the cluster can support (including the command switch).ro Integer32 .1.3.6.1.4.1.2011.6.7.1.17 |
hgmpClusterCmdSwMacThe mac address of command switch. It will be 00:00:00:00:00:00 when not a member of a cluster.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.6.7.1.18 |
hgmpRunStatus of the cluster function.rw Enumeration .1.3.6.1.4.1.2011.6.7.1.19 |
hgmpClusterAutojoinStatus of the cluster autojoin function. The default value is false(0).rw Enumeration .1.3.6.1.4.1.2011.6.7.1.20 |
hgmpClusterDiscAgingTimeAging time of the lanswitch in disconnect state. The default value is 0.rw Integer32 .1.3.6.1.4.1.2011.6.7.1.21 |
hgmpPlugAndPlayStatusStatus of the plug and play function. The default value is disabled(2)
.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.6.7.1.22 |
hgmpMultiMacAddressMulticast MAC address of cluster. The default value is '01:80:C2:00:00:0A'.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.6.7.1.23 |
hgmpManageVlanID of the management VLAN of the cluster. The default value is 1.rw Integer32 .1.3.6.1.4.1.2011.6.7.1.24 |
hgmpSftpServerThe cluster members can access the SFTP Server through the command switch, which can only be configured and accessed on the command switch. The default value is '0.0.0.0'.rw IpAddress .1.3.6.1.4.1.2011.6.7.1.25 |
hgmpUnrelatedPortNdpAdminTableThe table of the commands to set the NDP status on unrelated interfaces of cluster members. SEQUENCE OF HgmpUnrelatedPortNdpAdminEntry .1.3.6.1.4.1.2011.6.7.1.26 |
hgmpUnrelatedPortNdpAdminEntryThe entry used to set the NDP status on unrelated interfaces of cluster members. HgmpUnrelatedPortNdpAdminEntry .1.3.6.1.4.1.2011.6.7.1.26.1 |
hgmpUnrelatedPortNdpAdminCmdIdThe identifier of the command to set the NDP status on unrelated interfaces of cluster members. Integer32 .1.3.6.1.4.1.2011.6.7.1.26.1.1 |
hgmpUnrelatedPortNdpAdminGroupTypeType of grouping member swithces.rw Enumeration .1.3.6.1.4.1.2011.6.7.1.26.1.2 |
hgmpUnrelatedPortNdpAdminGroupValueDetails about grouping member switches.rw OCTET STRING .1.3.6.1.4.1.2011.6.7.1.26.1.3 |
hgmpUnrelatedPortNdpAdminStatusThe flag bit identifying whether NDP is enabled or not on unrelated interface on unrelated interfaces of cluster members.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.6.7.1.26.1.4 |
hgmpUnrelatedPortNdpAdminRowStatusRow status for this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.7.1.26.1.5 |
hgmpUnrelatedPortNdpResultTableThe result table of enabling or disabling NDP on unrelated interfaces of cluster members. SEQUENCE OF HgmpUnrelatedPortNdpResultEntry .1.3.6.1.4.1.2011.6.7.1.27 |
hgmpUnrelatedPortNdpResultEntryThe entry of the result when enabling or disabling NDP on unrelated interfaces of cluster members. HgmpUnrelatedPortNdpResultEntry .1.3.6.1.4.1.2011.6.7.1.27.1 |
hgmpUnrelatedPortNdpResultMemberMacMAC address of the member switch. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.6.7.1.27.1.1 |
hgmpUnrelatedPortNdpResultMemberIdIdentifier of the member switch.ro Integer32 .1.3.6.1.4.1.2011.6.7.1.27.1.2 |
hgmpUnrelatedPortNdpResultResults returned from member switches.ro Enumeration .1.3.6.1.4.1.2011.6.7.1.27.1.3 |
hgmpUnrelatedPortNtdpAdminTableThe table of the commands to set the NTDP status on unrelated interfaces of cluster members. SEQUENCE OF HgmpUnrelatedPortNtdpAdminEntry .1.3.6.1.4.1.2011.6.7.1.28 |
hgmpUnrelatedPortNtdpAdminEntryThe entry used to set the NTDP status on unrelated interfaces of cluster members. HgmpUnrelatedPortNtdpAdminEntry .1.3.6.1.4.1.2011.6.7.1.28.1 |
hgmpUnrelatedPortNtdpAdminCmdIdThe identifier of the command to set the NTDP status on unrelated interfaces of cluster members. Integer32 .1.3.6.1.4.1.2011.6.7.1.28.1.1 |
hgmpUnrelatedPortNtdpAdminGroupTypeType of grouping member swithces.rw Enumeration .1.3.6.1.4.1.2011.6.7.1.28.1.2 |
hgmpUnrelatedPortNtdpAdminGroupValueDetails about grouping member switches.rw OCTET STRING .1.3.6.1.4.1.2011.6.7.1.28.1.3 |
hgmpUnrelatedPortNtdpAdminStatusThe flag bit identifying whether NTDP is enabled or not on unrelated interface on unrelated interfaces of cluster members.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.6.7.1.28.1.4 |
hgmpUnrelatedPortNtdpAdminRowStatusRow status for this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.7.1.28.1.5 |
hgmpUnrelatedPortNtdpResultTableThe result table of enabling or disabling NTDP on unrelated interfaces of cluster members. SEQUENCE OF HgmpUnrelatedPortNtdpResultEntry .1.3.6.1.4.1.2011.6.7.1.29 |
hgmpUnrelatedPortNtdpResultEntryThe entry of the result when enabling or disabling NTDP on unrelated interfaces of cluster members. HgmpUnrelatedPortNtdpResultEntry .1.3.6.1.4.1.2011.6.7.1.29.1 |
hgmpUnrelatedPortNtdpResultMemberMacMAC address of the member switch. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.6.7.1.29.1.1 |
hgmpUnrelatedPortNtdpResultMemberIdIdentifier of the member switch.ro Integer32 .1.3.6.1.4.1.2011.6.7.1.29.1.2 |
hgmpUnrelatedPortNtdpResultResults returned from member switches.ro Enumeration .1.3.6.1.4.1.2011.6.7.1.29.1.3 |
hgmpBatchUpgradeTableTable of batch upgrade commands. SEQUENCE OF HgmpBatchUpgradeEntry .1.3.6.1.4.1.2011.6.7.1.30 |
hgmpBatchUpgradeEntryProvides the information of batch upgrade entry. HgmpBatchUpgradeEntry .1.3.6.1.4.1.2011.6.7.1.30.1 |
hgmpBatchUpgradeCmdIdIdentifier of batch upgrade commands. Integer32 .1.3.6.1.4.1.2011.6.7.1.30.1.1 |
hgmpBatchUpgradeGroupTypeType of grouping member switches.rw Enumeration .1.3.6.1.4.1.2011.6.7.1.30.1.2 |
hgmpBatchUpgradeGroupValueDetails about grouping member switches.rw OCTET STRING .1.3.6.1.4.1.2011.6.7.1.30.1.3 |
hgmpBatchUpgradeFileTypeType of the file to be upgraded.rw Enumeration .1.3.6.1.4.1.2011.6.7.1.30.1.4 |
hgmpBatchUpgradeFileNamePath of the file to be upgraded.rw OCTET STRING .1.3.6.1.4.1.2011.6.7.1.30.1.5 |
hgmpBatchUpgradeRowStatusRow status for this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.7.1.30.1.6 |
hgmpBatchUpgradeResultTableResults of batch commands returned from member switches. SEQUENCE OF HgmpBatchUpgradeResultEntry .1.3.6.1.4.1.2011.6.7.1.31 |
hgmpBatchUpgradeResultEntryProvides the result of batch upgrade entry. HgmpBatchUpgradeResultEntry .1.3.6.1.4.1.2011.6.7.1.31.1 |
hgmpBatchUpgradeResultMemberMacMAC address of the member switch. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.6.7.1.31.1.1 |
hgmpBatchUpgradeResultMemberIdIdentifier of the member switch.ro Integer32 .1.3.6.1.4.1.2011.6.7.1.31.1.2 |
hgmpBatchUpgradeResultResults returned from member switchs.ro Enumeration .1.3.6.1.4.1.2011.6.7.1.31.1.3 |
hgmpBatchRebootTableTable of commands for member switch reboot. SEQUENCE OF HgmpBatchRebootEntry .1.3.6.1.4.1.2011.6.7.1.32 |
hgmpBatchRebootEntryProvides the information of member reboot entry. HgmpBatchRebootEntry .1.3.6.1.4.1.2011.6.7.1.32.1 |
hgmpBatchRebootCmdIdIdentifier of the commands for member switch reboot. Integer32 .1.3.6.1.4.1.2011.6.7.1.32.1.1 |
hgmpBatchRebootGroupTypeType of grouping member swithces.rw Enumeration .1.3.6.1.4.1.2011.6.7.1.32.1.2 |
hgmpBatchRebootGroupValueDetails about grouping member switches.rw OCTET STRING .1.3.6.1.4.1.2011.6.7.1.32.1.3 |
hgmpBatchRebootRowStatusRow status for this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.7.1.32.1.4 |
hgmpBatchRebootResultTableResults of reboot command returned from member switches. SEQUENCE OF HgmpBatchRebootResultEntry .1.3.6.1.4.1.2011.6.7.1.33 |
hgmpBatchRebootResultEntryProvides the result of member reboot entry. HgmpBatchRebootResultEntry .1.3.6.1.4.1.2011.6.7.1.33.1 |
hgmpBatchRebootResultMemberMacMAC address of the member switch. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.6.7.1.33.1.1 |
hgmpBatchRebootResultMemberIdIdentifier of the member switch.ro Integer32 .1.3.6.1.4.1.2011.6.7.1.33.1.2 |
hgmpBatchRebootResultResults returned from member switches.ro Enumeration .1.3.6.1.4.1.2011.6.7.1.33.1.3 |
hgmpBatchSaveTableThe table of saving configuration files on cluster members. SEQUENCE OF HgmpBatchSaveEntry .1.3.6.1.4.1.2011.6.7.1.34 |
hgmpBatchSaveEntryThe entry of saving configuration files on cluster members. HgmpBatchSaveEntry .1.3.6.1.4.1.2011.6.7.1.34.1 |
hgmpBatchSaveCmdIdThe identifier of the commands to save configuration files on cluster members. Integer32 .1.3.6.1.4.1.2011.6.7.1.34.1.1 |
hgmpBatchSaveGroupTypeType of grouping member swithces.rw Enumeration .1.3.6.1.4.1.2011.6.7.1.34.1.2 |
hgmpBatchSaveGroupValueDetails about grouping member switches.rw OCTET STRING .1.3.6.1.4.1.2011.6.7.1.34.1.3 |
hgmpBatchSaveRowStatusRow status for this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.7.1.34.1.4 |
hgmpBatchSaveResultTableThe results of saving configuration files on cluster members. SEQUENCE OF HgmpBatchSaveResultEntry .1.3.6.1.4.1.2011.6.7.1.35 |
hgmpBatchSaveResultEntryThe entry of result when saving configuration files on cluster members. HgmpBatchSaveResultEntry .1.3.6.1.4.1.2011.6.7.1.35.1 |
hgmpBatchSaveResultMemberMacMAC address of the member switch. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.6.7.1.35.1.1 |
hgmpBatchSaveResultMemberIdIdentifier of the member switch.ro Integer32 .1.3.6.1.4.1.2011.6.7.1.35.1.2 |
hgmpBatchSaveResultResults returned from member switches.ro Enumeration .1.3.6.1.4.1.2011.6.7.1.35.1.3 |
hgmpBatchSynchronizeCfgFileTableThe table of synchronizing configuration files on cluster members. SEQUENCE OF HgmpBatchSynchronizeCfgFileEntry .1.3.6.1.4.1.2011.6.7.1.36 |
hgmpBatchSynchronizeCfgFileEntryThe entry of synchronizing configuration files on cluster members. HgmpBatchSynchronizeCfgFileEntry .1.3.6.1.4.1.2011.6.7.1.36.1 |
hgmpBatchSynchronizeCfgFileCmdIdThe identifier of the command of synchronizing configuration files on cluster members. Integer32 .1.3.6.1.4.1.2011.6.7.1.36.1.1 |
hgmpBatchSynchronizeCfgFileGroupTypeType of grouping member swithces.rw Enumeration .1.3.6.1.4.1.2011.6.7.1.36.1.2 |
hgmpBatchSynchronizeCfgFileGroupValueDetails about grouping member switches.rw OCTET STRING .1.3.6.1.4.1.2011.6.7.1.36.1.3 |
hgmpBatchSynchronizeCfgFileRowStatusRow status for this table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.6.7.1.36.1.4 |
hgmpBatchSynchronizeCfgFileResultTableThe result of synchronizing configuration files on cluster members. SEQUENCE OF HgmpBatchSynchronizeCfgFileResultEntry .1.3.6.1.4.1.2011.6.7.1.37 |
hgmpBatchSynchronizeCfgFileResultEntryThe entry of result when synchronizing configuration files on cluster members. HgmpBatchSynchronizeCfgFileResultEntry .1.3.6.1.4.1.2011.6.7.1.37.1 |
hgmpBatchSynchronizeCfgFileResultMemberMacMAC address of the member switch. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.6.7.1.37.1.1 |
hgmpBatchSynchronizeCfgFileResultMemberIdIdentifier of the member switch.ro Integer32 .1.3.6.1.4.1.2011.6.7.1.37.1.2 |
hgmpBatchSynchronizeCfgFileResultResults returned from member switches.ro Enumeration .1.3.6.1.4.1.2011.6.7.1.37.1.3 |
hgmpMemberRebootTimeoutValueTimeout time of the member reboot operation (in seconds). The default value is 360 seconds.rw Integer32 .1.3.6.1.4.1.2011.6.7.1.38 |
hgmpClusterVersionConfigure the cluster version. The default value is v2c(2).rw Enumeration .1.3.6.1.4.1.2011.6.7.1.39 |
hwStackObject OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.7.2 |
hgmpStackEventsV2 OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.7.2.0 |
hgmpStackMemberfailureWhen a stack member failed,
send an SNMP trap to the network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.7.2.0.1 |
hgmpStackMemberRecoverWhen a stack member recovered,
send an SNMP trap to the network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.7.2.0.2 |
hgmpStackMemberStatusChangeWhen a stack member status changed,
send an SNMP trap to the network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.6.7.2.0.3 |
hgmpStackMemberTableChangeChange identifier of the stack member table. The default value is 0.ro Integer32 .1.3.6.1.4.1.2011.6.7.2.1 |
hgmpStackMemberDisconRateDisconnection rate of the stack member switches. The default value is 0.ro Integer32 .1.3.6.1.4.1.2011.6.7.2.2 |
hgmpMainLanswitchFlagMain switch flag. The default value is false(0).rw Enumeration .1.3.6.1.4.1.2011.6.7.2.3 |
hgmpStackIpPoolStartIPThe first address of management IP network segment assigned by the master switch, which cannot be modified in the case that there is IP address assignment. The default value is '0.0.0.0'.rw IpAddress .1.3.6.1.4.1.2011.6.7.2.4 |
hgmpStackIpPoolLengthThe length of the management IP segment assigned by the master switch, which cannot be modified if there is IP address assignment. The default value is 17.rw Integer32 .1.3.6.1.4.1.2011.6.7.2.5 |
hgmpStackMemberTableStack member table. SEQUENCE OF HgmpStackMemberEntry .1.3.6.1.4.1.2011.6.7.2.6 |
hgmpStackMemberEntryProvides information about the stack member entry. HgmpStackMemberEntry .1.3.6.1.4.1.2011.6.7.2.6.1 |
hgmpStackMemberDeviceId2 bytes address type of the switch + 2 bytes/0 + MAC address, comprising a hexadecimal number string.ro OCTET STRING .1.3.6.1.4.1.2011.6.7.2.6.1.1 |
hgmpStackMemberSerialWhen adding a member switch to the stack, the master switch will assign a unique integer to identify it.ro Integer32 .1.3.6.1.4.1.2011.6.7.2.6.1.2 |
hgmpStackMemberIpAddrThe private member IP address for the communication inside the stack.ro IpAddress .1.3.6.1.4.1.2011.6.7.2.6.1.3 |
hgmpStackMemberNameHostname of the member switch.ro OCTET STRING .1.3.6.1.4.1.2011.6.7.2.6.1.4 |
hgmpStackMemberPasswordMember password for joining a stack.ro OCTET STRING .1.3.6.1.4.1.2011.6.7.2.6.1.5 |
hgmpStackMemberPlatformSet the hardware platform. A null string indicates the information does not exist in the device adjacency table.ro OCTET STRING .1.3.6.1.4.1.2011.6.7.2.6.1.6 |
hgmpStackMemberStatusMember status on the master switch, used for displaying the network management status. The default value is fault.ro Enumeration .1.3.6.1.4.1.2011.6.7.2.6.1.7 |
hgmpStackMemberDisconCountCount of inside communication disconnections between the member switch and the main switch.ro Integer32 .1.3.6.1.4.1.2011.6.7.2.6.1.8 |
hgmpStackMemberEnrollTimeEnrollment time of the member, measured in seconds.ro Integer32 .1.3.6.1.4.1.2011.6.7.2.6.1.9 |
hgmpStackRoleRole of this switch in a stack. The default value is roleCASW(16).ro Enumeration .1.3.6.1.4.1.2011.6.7.2.7 |
hgmpStackMaxPoolNumMaximum switch members in a stack that the switch supports (including the main switch).ro Integer32 .1.3.6.1.4.1.2011.6.7.2.8 |
hgmpStackMainSwMacThe MAC address of the main switch. It will be 00:00:00:00:00:00 when not a member of a stack.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.6.7.2.9 |
hgmpStackIpPoolMaskThe mask of the management IP segment assigned by the master switch, which cannot be modified if there is IP address assignment. The default value is '255.255.0.0
'.rw IpAddress .1.3.6.1.4.1.2011.6.7.2.10 |
hwNTDPObject OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.7.4 |
hgmpNTDPCollectTopTimeTopology collection interval of the command switch of the cluster, measured in minutes. The default value is 0.rw Integer32 .1.3.6.1.4.1.2011.6.7.4.1 |
hgmpNTDPHopRangeRange of the topology collection of the command switch.rw Integer32 .1.3.6.1.4.1.2011.6.7.4.2 |
hgmpNTDPRunStatus of the NTDP function.rw Enumeration .1.3.6.1.4.1.2011.6.7.4.3 |
hgmpNTDPPortDelaySet the delay to forward the topology request via the ports, measured in milliseconds. The default value is 20.rw Integer32 .1.3.6.1.4.1.2011.6.7.4.4 |
hgmpNTDPHopDelaySet the delay to forward the topology request from each hop, measured in milliseconds. The default value is 200.rw Integer32 .1.3.6.1.4.1.2011.6.7.4.5 |
hgmpNTDPLastTopCollectDurationDuration of the latest overall topology collection, a performance count measured in milliseconds. The default value is 0.ro Integer32 .1.3.6.1.4.1.2011.6.7.4.6 |
hgmpNTDPCacheChangeAdd 1 when the device table changes. The network administrator will check if it has changed before accessing the table. If it has not changed, he will not access again. The default value is 0.ro Integer32 .1.3.6.1.4.1.2011.6.7.4.7 |
hgmpNTDPTOPTableChangeAdd 1 when the topology table changes. The network administrator will check if it has changed before accessing the table. If it has not changed, he will not access again. The default value is 0.ro Integer32 .1.3.6.1.4.1.2011.6.7.4.8 |
hgmpNTDPInterfaceTableStatus of NTDP function on the switch's port. SEQUENCE OF HgmpNTDPInterfaceEntry .1.3.6.1.4.1.2011.6.7.4.9 |
hgmpNTDPInterfaceEntryProvides information about the NTDP function on the switch's port. HgmpNTDPInterfaceEntry .1.3.6.1.4.1.2011.6.7.4.9.1 |
hgmpNTDPInterfaceIfIndexUnique identifier of an interface of the device.ro Integer32 .1.3.6.1.4.1.2011.6.7.4.9.1.1 |
hgmpNTDPInterfaceEnableIf it is true, the device will send and receive the NTDP packets via the interface. To disable the NTDP function on the interface, set the entry to false(0).rw Enumeration .1.3.6.1.4.1.2011.6.7.4.9.1.2 |
hgmpNTDPCacheTableAccess information about the switch from the topology table. SEQUENCE OF HgmpNTDPCacheEntry .1.3.6.1.4.1.2011.6.7.4.10 |
hgmpNTDPCacheEntryProvides information about the switch from the topology table. HgmpNTDPCacheEntry .1.3.6.1.4.1.2011.6.7.4.10.1 |
hgmpNTDPCacheHashIndexNTDP information is saved in a HASH table on the command switch. Using DeviceID as an index will lead to the comparison of a large number of character strings, which puts too many burdens on the command switch. A HASHIndex is added to reduce the character string comparison to the least range.ro Integer32 .1.3.6.1.4.1.2011.6.7.4.10.1.1 |
hgmpNTDPCacheDeviceID2 bytes address type of the member switch + 2 bytes /0 + MAC address, comprising as a character string of the hexadecimal number.ro OCTET STRING .1.3.6.1.4.1.2011.6.7.4.10.1.2 |
hgmpNTDPCacheClusterNameName of the cluster including the device.ro OCTET STRING .1.3.6.1.4.1.2011.6.7.4.10.1.3 |
hgmpNTDPCacheClusterRoleCluster role of the current device, which can be a command switch(0X01), member switch(0X02), backup switch(0X03), candidate switch(0X10) or an independent switch(incapable of cluster member)(0X11). The default value is 17.ro Enumeration .1.3.6.1.4.1.2011.6.7.4.10.1.4 |
hgmpNTDPCacheCapabilitiesThe capabilities of the device. Zero indicates that the field was not included in the latest NTDP packet. The default value is 0.ro Integer32 .1.3.6.1.4.1.2011.6.7.4.10.1.5 |
hgmpNTDPCacheVersionThe version information about the corresponding device. A null string indicates that the field was not included in the latest NTDP packet.ro OCTET STRING .1.3.6.1.4.1.2011.6.7.4.10.1.6 |
hgmpNTDPCachePlatformHardware platform. A null string indicates that the field was not included in the latest NTDP packet.ro OCTET STRING .1.3.6.1.4.1.2011.6.7.4.10.1.7 |
hgmpNTDPCacheMngVLANThe management VLAN ID of a device. The default value is 1.ro Integer32 .1.3.6.1.4.1.2011.6.7.4.10.1.8 |
hgmpNTDPCacheHopHops to this switch.ro Integer32 .1.3.6.1.4.1.2011.6.7.4.10.1.9 |
hgmpNTDPTopTableAccess the topology structure collected by the NTDP. SEQUENCE OF HgmpNTDPTopEntry .1.3.6.1.4.1.2011.6.7.4.11 |
hgmpNTDPTopEntryProvides information about the topology structure collected by the NTDP. HgmpNTDPTopEntry .1.3.6.1.4.1.2011.6.7.4.11.1 |
hgmpNTDPTopHashIndexNTDP information is saved in a HASH table on the command switch. Using DeviceID as an index will lead to the comparison of a large number of character strings, which puts too many burdens on the command switch. A HASHIndex is added to reduce the character string comparison to the least range.ro Integer32 .1.3.6.1.4.1.2011.6.7.4.11.1.1 |
hgmpNTDPTopEdgeStartDevID2 bytes address type of the member switch + 2 bytes /0 + MAC address, comprising a character string of the hexadecimal number.ro OCTET STRING .1.3.6.1.4.1.2011.6.7.4.11.1.2 |
hgmpNTDPTopEdgeIndexEdge index of this entry in the data structure.ro Integer32 .1.3.6.1.4.1.2011.6.7.4.11.1.3 |
hgmpNTDPTopEdgeEndDevID2 bytes address type of the member switch + 2 bytes /0 + MAC address, comprising a character string of the hexadecimal number.ro OCTET STRING .1.3.6.1.4.1.2011.6.7.4.11.1.4 |
hgmpNTDPTopEdgeStartPortThe number of the first port of a topology edge. Interface type + card number / slot number / sequence number.ro OCTET STRING .1.3.6.1.4.1.2011.6.7.4.11.1.5 |
hgmpNTDPTopEdgeStartPortFullDuplexThe full-duplex status of the first port on a topology edge. The default value is half.ro Enumeration .1.3.6.1.4.1.2011.6.7.4.11.1.6 |
hgmpNTDPTopEdgeStartPortSpeedThe speed of the first port on a topology edge. The default value is 0.ro Integer32 .1.3.6.1.4.1.2011.6.7.4.11.1.7 |
hgmpNTDPTopEdgeEndPortThe number of the last port of a topology edge. Interface type + card number / slot number / sequence number.ro OCTET STRING .1.3.6.1.4.1.2011.6.7.4.11.1.8 |
hgmpNTDPTopEdgeStartPortIfIndexThe interface index of the start port.ro Integer32 .1.3.6.1.4.1.2011.6.7.4.11.1.9 |
hgmpNTDPTopEdgeEndPortIfIndexThe iterface index of the end port.ro Integer32 .1.3.6.1.4.1.2011.6.7.4.11.1.10 |
hwNDPObject OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.7.5 |
hwNDPStatusNDP protocol module enable flag.rw Enumeration .1.3.6.1.4.1.2011.6.7.5.1 |
hwNDPHelloTimerNDP packet transmission interval, measured in seconds. The default value is 60.rw Integer32 .1.3.6.1.4.1.2011.6.7.5.2 |
hwNDPAgingTimeHow long NDP information about the local switch can be hold in the adjacent switch, measured in seconds. The default value is 180.rw Integer32 .1.3.6.1.4.1.2011.6.7.5.3 |
hwNDPChangeChange identifier of the Neighbor table.ro Counter32 .1.3.6.1.4.1.2011.6.7.5.4 |
hwNDPPortTableStatus of NDP function on the switch's port. SEQUENCE OF HwNDPPortEntry .1.3.6.1.4.1.2011.6.7.5.5 |
hwNDPPortEntryProvides information about the NDP function on the switch's port. HwNDPPortEntry .1.3.6.1.4.1.2011.6.7.5.5.1 |
hwNDPIfIndexUnique identifier of an interface of the device.ro Integer32 .1.3.6.1.4.1.2011.6.7.5.5.1.1 |
hwNDPPortStatusIf it is enabled, the device will send and receive NDP packets via the interface. To disable the NDP function on the interface, set the entry to false(0).rw Enumeration .1.3.6.1.4.1.2011.6.7.5.5.1.2 |
hwNDPPortNbTableTable of NDP neighbor information. SEQUENCE OF HwNDPNbEntry .1.3.6.1.4.1.2011.6.7.5.6 |
hwNDPPortNbEntryProvides neighbor information about NDP. HwNDPNbEntry .1.3.6.1.4.1.2011.6.7.5.6.1 |
hwNDPPortNbDeviceId2 bytes address type of the member switch + 2 bytes /0 + MAC address, comprising a character string of the hexadecimal number.ro OCTET STRING .1.3.6.1.4.1.2011.6.7.5.6.1.1 |
hwNDPPortNbPortNameUnique identifier of a port. A null string indicates that the field was not included in the latest NDP packet. Interface type + card number / slot number / sequence number.ro OCTET STRING .1.3.6.1.4.1.2011.6.7.5.6.1.2 |
hwNDPPortNbDeviceNameDevice name. A null string indicates that the field was not included in the latest NDP packet.ro OCTET STRING .1.3.6.1.4.1.2011.6.7.5.6.1.3 |
hwNDPPortNbPortModeThe neighbor port duplex mode.ro Enumeration .1.3.6.1.4.1.2011.6.7.5.6.1.4 |
hwNDPPortNbProductVerProduct version. A null string indicates that the field was not included in the latest NDP packet.ro OCTET STRING .1.3.6.1.4.1.2011.6.7.5.6.1.5 |
hwNDPPortNbHardVerHardware version. A null string indicates that the field was not included in the latest NDP packet.ro OCTET STRING .1.3.6.1.4.1.2011.6.7.5.6.1.6 |
hwNDPPortNbBootromVerBootrom version. A null string indicates that the field was not included in the latest NDP packet.ro OCTET STRING .1.3.6.1.4.1.2011.6.7.5.6.1.7 |
hwNDPPortNbSoftVerSoftware version. A null string indicates that the field was not included in the latest NDP packet.ro OCTET STRING .1.3.6.1.4.1.2011.6.7.5.6.1.8 |
hwNDPPortNbAgingtimeHow long NDP information about the local switch can be hold in the adjacent switch, measured in seconds.ro Integer32 .1.3.6.1.4.1.2011.6.7.5.6.1.9 |
hwClusterConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.7.6 |
hwClusterGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.7.6.1 |
hwClusterCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.6.7.6.2 |