HUAWEI-ETHARP-MIB
AI MIB Summary
The HUAWEI-ETHARP-MIB enables monitoring and control of Ethernet Address Resolution Protocol (ARP) tables and traffic on Huawei network devices, specifically exposing metrics for ARP table entry counts and enforcing ARP rate-limiting thresholds to mitigate broadcast storms or ARP spoofing attacks.
This MIB describes objects used for managing Ethernet ARP, including ARP Speed-limit,ARP Limit etc.
Main OID:
hwEthernetARPMIB.1.3.6.1.4.1.2011.5.25.123
154
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
154 total| Object Name |
|---|
hwEthernetARPMIBThis MIB describes objects used for managing Ethernet ARP,
including ARP Speed-limit,ARP Limit etc. MODULE-IDENTITY .1.3.6.1.4.1.2011.5.25.123 |
HUAWEI-MIBThis MIB describes objects used for managing Ethernet ARP,
including ARP Speed-limit,ARP Limit etc. Unknown .1.3.6.1.4.1.2011.5.25.123 |
hwEthernetARPObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.123.1 |
hwEthernetARPAntiAttackLogTo prevent log and trap from being attacked, the function is not enabled by default.rw Integer32 .1.3.6.1.4.1.2011.5.25.123.1.1 |
hwEthernetARPLearningStrictIndicates the ARP strict learning. In this way, routers can learn ARP entries only from
the arp reply in response to the arp requrest send by the router.rw Enumeration .1.3.6.1.4.1.2011.5.25.123.1.2 |
hwEthernetARPSpeedLimitTableThe table contains the configuration information of Ethernet ARP Speed limit slot.
The information includes type, speedvalue, sourceip and destip. SEQUENCE OF HwEthernetARPSpeedLimitEntry .1.3.6.1.4.1.2011.5.25.123.1.3 |
hwEthernetARPSpeedLimitEntryThe table contains the configuration information of Ethernet ARP Speed limit slot.
The information includes type, speedvalue, sourceip and destip. HwEthernetARPSpeedLimitEntry .1.3.6.1.4.1.2011.5.25.123.1.3.1 |
hwEthernetARPLimitSlotThe slot of ARP Speed Limit. Integer32 .1.3.6.1.4.1.2011.5.25.123.1.3.1.1 |
hwEthernetARPLimitTypeThe Type of ARP Speed Limit. Enumeration .1.3.6.1.4.1.2011.5.25.123.1.3.1.2 |
hwEthernetARPLimitIPTypeARP speed limit is performed on a source or a destination IP address. Enumeration .1.3.6.1.4.1.2011.5.25.123.1.3.1.3 |
hwEthernetARPLimitSpeedValueThe Speed Value of ARP Speed Limit.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.123.1.3.1.4 |
hwEthernetARPSpeedLimitIfIndexIndicates an interface enabled with ARP-MISS
or an interface receiving the ARP packets.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.123.1.4 |
hwEthernetARPSpeedLimitConfiguredThe Configured Speed Limit Value of ARP Speed Limit.ro Counter32 .1.3.6.1.4.1.2011.5.25.123.1.5 |
hwEthernetARPSpeedLimitCurrentThe Current Speed Limit Value of ARP Speed Limit.ro Counter32 .1.3.6.1.4.1.2011.5.25.123.1.6 |
hwEthernetARPSpeedLimitTypeThe Type of ARP Speed Limit.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.123.1.7 |
hwEthernetARPSpeedLimitSrcIPAddrThe Source IP address of ARP Speed Limit.ro IpAddress .1.3.6.1.4.1.2011.5.25.123.1.8 |
hwEthernetARPSpeedLimitDstIPAddrThe Destination IP address of ARP Speed Limit.ro IpAddress .1.3.6.1.4.1.2011.5.25.123.1.9 |
hwEthernetARPSpeedLimitVPNinstanceThe VPN-instance name of ARP Speed Limit.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.123.1.10 |
hwEthernetARPStaticsTableA table contains the statistics about Ethernet ARP.
The statistics include number of received ARP packets,
number of received ARP-MISS packets, number of learned ARP packets,
number of discarded ARP packets caused by the ARP limit,
the number of discarded ARP-MISS packets caused by the limit
and the number of discarded ARP and ARP-MISS packets caused by other reasons. SEQUENCE OF HwEthernetARPStaticsEntry .1.3.6.1.4.1.2011.5.25.123.1.11 |
hwEthernetARPStaticsEntryA table contains the statistics about Ethernet ARP.
The statistics include number of received ARP packets,
number of received ARP-MISS packets, number of learned ARP packets,
number of discarded ARP packets caused by the ARP limit,
the number of discarded ARP-MISS packets caused by the limit
and the number of discarded ARP and ARP-MISS packets caused by other reasons. HwEthernetARPStaticsEntry .1.3.6.1.4.1.2011.5.25.123.1.11.1 |
hwEthernetARPStaticsSlotThe slot about which the ARP statistics are displayed. Integer32(0..128 | 65535) .1.3.6.1.4.1.2011.5.25.123.1.11.1.1 |
hwEthernetARPStaticsLearnTotalThe total number of the learned ARP packets.ro Counter32 .1.3.6.1.4.1.2011.5.25.123.1.11.1.2 |
hwEthernetARPDropForLimitThe number of discarded packets caused by limit.ro Counter32 .1.3.6.1.4.1.2011.5.25.123.1.11.1.3 |
hwEthernetARPDropForARPSuppressThe number of discarded packets caused by the ARP suppress.ro Counter32 .1.3.6.1.4.1.2011.5.25.123.1.11.1.4 |
hwEthernetARPDropForARPMissSuppressThe number of discarded packets caused by the ARP-MISS suppress.ro Counter32 .1.3.6.1.4.1.2011.5.25.123.1.11.1.5 |
hwEthernetARPDropForOtherThe number of discarded ARP packets caused by other reasons.ro Counter32 .1.3.6.1.4.1.2011.5.25.123.1.11.1.6 |
hwEthernetARPMissDropForOtherThe number of discarded ARP-MISS caused by other reasons.ro Counter32 .1.3.6.1.4.1.2011.5.25.123.1.11.1.7 |
hwEthernetARPRcvNumThe number of received ARP packets.ro Counter32 .1.3.6.1.4.1.2011.5.25.123.1.11.1.8 |
hwEthernetARPMissRcvNumThe number of received ARP-MISS.ro Counter32 .1.3.6.1.4.1.2011.5.25.123.1.11.1.9 |
hwEthernetARPStaticsOperationresets the statistics about Ethernet ARP.rw Enumeration .1.3.6.1.4.1.2011.5.25.123.1.11.1.10 |
hwEthernetARPDropForARPProxySuppressThe number of discarded packets caused by the ARP-PROXY suppress.ro Counter32 .1.3.6.1.4.1.2011.5.25.123.1.11.1.11 |
hwEthARPShowWithInterAndVidTableDisplay the ARP table based on interface number or interface number and VLAN ID. SEQUENCE OF HwEthARPShowWithInterAndVidEntry .1.3.6.1.4.1.2011.5.25.123.1.12 |
hwEthARPShowWithInterAndVidEntryDisplay the ARP table based on interface number or interface number and VLAN ID. HwEthARPShowWithInterAndVidEntry .1.3.6.1.4.1.2011.5.25.123.1.12.1 |
hwEthARPShowIfindexThe interface learns ARP packets. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.123.1.12.1.1 |
hwEthARPShowVidThe VLAN receives the APR packets. Integer32 .1.3.6.1.4.1.2011.5.25.123.1.12.1.2 |
hwEthARPIpAddrThe ip of ARP . IpAddress .1.3.6.1.4.1.2011.5.25.123.1.12.1.3 |
hwEthARPMacAddrThe MAC of ARP .ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.123.1.12.1.4 |
hwEthARPLimitTableConfigure the ARP limit based on interfaces or VLANs. SEQUENCE OF HwEthARPLimitEntry .1.3.6.1.4.1.2011.5.25.123.1.13 |
hwEthARPLimitEntryConfigure the ARP limit based on interfaces or VLANs. HwEthARPLimitEntry .1.3.6.1.4.1.2011.5.25.123.1.13.1 |
hwEthARPLimitCfgIfindexThe interface on which the limit is configured. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.123.1.13.1.1 |
hwEthARPVLANFirstThe VLAN to which Layer 2 interfaces belong. Integer32 .1.3.6.1.4.1.2011.5.25.123.1.13.1.2 |
hwEthARPVLANLastThe VLAN to which Layer 2 interfaces belong. Integer32 .1.3.6.1.4.1.2011.5.25.123.1.13.1.3 |
hwEthARPLimitNumThe value of the ARP limit.rw Integer32 .1.3.6.1.4.1.2011.5.25.123.1.13.1.4 |
hwEthARPLimitRowStatusThe running status of the ARP limit table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.123.1.13.1.5 |
hwEthernetARPLearningStrictInterfaceTableConfigure the ARP Learning Strict based on interfaces. SEQUENCE OF HwEthernetARPLearningStrictInterfaceEntry .1.3.6.1.4.1.2011.5.25.123.1.14 |
hwEthernetARPLearningStrictInterfaceEntryConfigure the ARP Learning Strict based on interfaces. HwEthernetARPLearningStrictInterfaceEntry .1.3.6.1.4.1.2011.5.25.123.1.14.1 |
hwEthernetARPLearningStrictIfindexThe interface on which the ARP Learning Strict be configured. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.123.1.14.1.1 |
hwEthernetARPLearningStrictStateThe ARP Learning Strict State be configured.rw Enumeration .1.3.6.1.4.1.2011.5.25.123.1.14.1.2 |
hwEthernetARPLearningStrictRowStatusThe running status of the ARP Learning Strict table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.123.1.14.1.3 |
hwArpLinkInterfaceTableConfig ARP link interface:
hwArpLinkIfIndex: interface index
hwArpLinkPeerIp: peer ip
hwArpLinkDetectTime: detection time between two ARP packects
hwArpLinkDetectTimes: detection times of ARP packects
hwArpLinkDetectMode: detection mode
hwArpLinkStatus: interface status
hwArpLinkRowStatus: the row status of this row. SEQUENCE OF HwArpLinkInterfaceEntry .1.3.6.1.4.1.2011.5.25.123.1.15 |
hwArpLinkInterfaceEntryConfig ARP link interface:
hwArpLinkIfIndex: interface index
hwArpLinkPeerIp: peer ip
hwArpLinkDetectTime: detection time between two ARP packects
hwArpLinkDetectTimes: detection times of ARP packects
hwArpLinkDetectMode: detection mode
hwArpLinkStatus: interface status
hwArpLinkRowStatus: the row status of this row. HwArpLinkInterfaceEntry .1.3.6.1.4.1.2011.5.25.123.1.15.1 |
hwArpLinkIfIndexThe index of interface which is configed to be linked by ARP,
the zero value is invalid. Integer32 .1.3.6.1.4.1.2011.5.25.123.1.15.1.1 |
hwArpLinkPeerIpThe IP address which ARP detecting packet will send to. When
creating a new record or modifying the peer ip address, a check for
this ip will be generated. If it is invalid, that operation will
be not applicable.rw InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.123.1.15.1.11 |
hwArpLinkDetectTimeThe interval time for two ARP packets are sent to detect the
peer's interface status, this time unit is millisecond. The valid
range is from 200 to 10000, and the default value is 1000.rw Integer32 .1.3.6.1.4.1.2011.5.25.123.1.15.1.12 |
hwArpLinkDetectTimesAfter the max detecting times for ARP packet is sent to, and there is not
any response, the sender can judge the peer interface is down. Then, setting
the status of current interface down. The valid range is from 1 to 10,
and the default value is 3.rw Integer32 .1.3.6.1.4.1.2011.5.25.123.1.15.1.13 |
hwArpLinkDetectModeThe detecting mode for ARP linking interface. If the mode is loose and its
status is down, current interface just wait to receive the ARP packet, when
received peer's arp packet, current interface status is up. If mode is
strict, current interface sends ARP detecting packet to peer actively, and
shutdown itself, if these is no response from peer after the retry times.
If status of current interface is up, it will send ARP packet to detect the
status of peer actively, whenever the mode is loose or strict.rw Enumeration .1.3.6.1.4.1.2011.5.25.123.1.15.1.14 |
hwArpLinkStatusThe status of interface linked by ARP. This value can not be set anytime.ro Enumeration .1.3.6.1.4.1.2011.5.25.123.1.15.1.15 |
hwArpLinkRowStatusThe row status of ARP link table. The detail can be found from the rowstatus definition.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.123.1.15.1.51 |
hwArpEntryExpireControlTableThe value of the object identifies the parameters of ARP aging detection,
such as ARP detection mode, start time, detection times. At present,
only the ARP detection mode and ARP fake-entry expire time can be configured.
hwArpEntryExpireIfIndex: indicates the interface index.
hwArpEntryExpireDetectMode: indicates the unicast or broadcast ARP aging detection mode.
hwArpEntryExpireFakeTime: indicates the expire time of ARP fake entry. SEQUENCE OF HwArpEntryExpireControlEntry .1.3.6.1.4.1.2011.5.25.123.1.16 |
hwArpEntryExpireControlEntryThe value of the object identifies the parameters of ARP aging detection,
such as ARP detection mode, start time, detection times. At present,
only the ARP detection mode and ARP fake-entry expire time can be configured.
hwArpEntryExpireIfIndex: indicates the interface index.
hwArpEntryExpireDetectMode: indicates the unicast or broadcast ARP aging detection mode.
hwArpEntryExpireFakeTime: indicates the expire time of ARP fake entry. HwArpEntryExpireControlEntry .1.3.6.1.4.1.2011.5.25.123.1.16.1 |
hwArpEntryExpireIfIndexThis object indicates the index of an interface on which ARP aging detection
parameters are set. The value 0 is invalid. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.123.1.16.1.1 |
hwArpEntryExpireDetectModeThis object indicates the ARP aging detection mode. In unicast ARP detection mode,
unicast ARP detection packets are sent before ARP ages. In broadcast ARP detection mode,
broadcast ARP detection packets are sent before ARP ages. By default,
the system adopts the broadcast ARP detection mode.rw Enumeration .1.3.6.1.4.1.2011.5.25.123.1.16.1.2 |
hwArpEntryExpireFakeTimeThis object indicates the expire time of ARP fake entry. The valid range is from 1 to 36000,
and the default value is 1.rw Integer32 .1.3.6.1.4.1.2011.5.25.123.1.16.1.3 |
hwArpDynTableThe value of the object identifies the items of ARP table,
such as IP address of ARP items, VPN instance name of ARP items,
MAC address of ARP items, VLAN information of ARP items, expire time of ARP items.
hwArpDynEntryIfIndex: indicates the interface index.
hwArpDynEntryIpAdd: indicates the IP address.
hwArpDynEntryVrf: indicates the VPN instance name.
hwArpDynEntryMacAdd: indicates the MAC address.
hwArpDynEntryVlanId: indicates the VLAN of ARP item.
hwArpDynEntryCeVlanId: indicates the CE VLAN of ARP item.
hwArpDynEntryOutIfIndex: indicates the forwarding interface.
hwArpDynEntryExpireTime: indicates the expire time of ARP item. SEQUENCE OF HwArpDynEntry .1.3.6.1.4.1.2011.5.25.123.1.17 |
hwArpDynEntryThe value of the object identifies the items of dynamic ARP table,
such as IP address of ARP items, VPN instance name of ARP items,
MAC address of ARP items, VLAN information of ARP items, expire time of ARP items.
hwArpDynEntryIfIndex: indicates the interface index.
hwArpDynEntryIpAdd: indicates the IP address.
hwArpDynEntryVrf: indicates the VPN instance name.
hwArpDynEntryMacAdd: indicates the MAC address.
hwArpDynEntryVlanId: indicates the VLAN of ARP item.
hwArpDynEntryCeVlanId: indicates the CE VLAN of ARP item.
hwArpDynEntryOutIfIndex: indicates the forwarding interface.
hwArpDynEntryExpireTime: indicates the expire time of ARP item. HwArpDynEntry .1.3.6.1.4.1.2011.5.25.123.1.17.1 |
hwArpDynIfIndexThe logic forwarding interface. The value 0 is invalid. Integer32 .1.3.6.1.4.1.2011.5.25.123.1.17.1.1 |
hwArpDynIpAddThis object indicates the IP address of an ARP items. The value 0 is invalid. InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.123.1.17.1.2 |
hwArpDynVrfThis object indicates the VPN name of an ARP items. OCTET STRING .1.3.6.1.4.1.2011.5.25.123.1.17.1.3 |
hwArpDynMacAddThis object indicates the MAC address of an ARP items.ro PhysAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.123.1.17.1.11 |
hwArpDynVlanIdThis object indicates the VLAN of an ARP items.ro Integer32 .1.3.6.1.4.1.2011.5.25.123.1.17.1.12 |
hwArpDynCeVlanIdThis object indicates the CE VLAN of an ARP items.ro Integer32 .1.3.6.1.4.1.2011.5.25.123.1.17.1.13 |
hwArpDynOutIfIndexThe physical forwarding interface.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.123.1.17.1.14 |
hwArpDynExpireTimeThis object indicates the expire time of an ARP items.ro Integer32 .1.3.6.1.4.1.2011.5.25.123.1.17.1.15 |
hwArpCfgTableThe value of the object identifies the items of static ARP table,
such as IP address of ARP items, VPN instance name of ARP items,
MAC address of ARP items, VLAN information of ARP items.
hwArpDynEntryIpAdd: indicates the IP address.
hwArpDynEntryVrf: indicates the VPN instance name.
hwArpDynEntryMacAdd: indicates the MAC address.
hwArpDynEntryVlanId: indicates the VLAN of ARP item.
hwArpDynEntryCeVlanId: indicates the CE VLAN of ARP item.
hwArpDynEntryOutIfIndex: indicates the forwarding interface. SEQUENCE OF HwArpCfgEntry .1.3.6.1.4.1.2011.5.25.123.1.18 |
hwArpCfgEntryThe value of the object identifies the items of static ARP table,
such as IP address of ARP items, VPN instance name of ARP items,
MAC address of ARP items, VLAN information of ARP items.
hwArpDynEntryIpAdd: indicates the IP address.
hwArpDynEntryVrf: indicates the VPN instance name.
hwArpDynEntryMacAdd: indicates the MAC address.
hwArpDynEntryVlanId: indicates the VLAN of ARP item.
hwArpDynEntryCeVlanId: indicates the CE VLAN of ARP item.
hwArpDynEntryOutIfIndex: indicates the forwarding interface. HwArpCfgEntry .1.3.6.1.4.1.2011.5.25.123.1.18.1 |
hwArpCfgIpAddThis object indicates the IP address of an ARP items. The value 0 is invalid. InetAddressIPv4 (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.123.1.18.1.1 |
hwArpCfgMacAddThis object indicates the MAC address of an ARP items.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.123.1.18.1.2 |
hwArpCfgVrfThis object indicates the VPN name of an ARP items. OCTET STRING .1.3.6.1.4.1.2011.5.25.123.1.18.1.3 |
hwArpCfgVlanIdThis object indicates the VLAN of an ARP items.rw Integer32 .1.3.6.1.4.1.2011.5.25.123.1.18.1.11 |
hwArpCfgCeVlanIdThis object indicates the CE VLAN of an ARP items.rw Integer32 .1.3.6.1.4.1.2011.5.25.123.1.18.1.12 |
hwArpCfgOutIfIndexThe physical forwarding interface.rw Integer32 .1.3.6.1.4.1.2011.5.25.123.1.18.1.13 |
hwArpCfgRowstatusThis object indicates the row status of an static ARP item.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.123.1.18.1.51 |
hwEthernetARPAntiAttackStatusThis object indicates the status of the ARP anti-attack.ro Enumeration .1.3.6.1.4.1.2011.5.25.123.1.19 |
hwEthernetARPAntiGateWayConflictThis object indicates the status of the ARP anti-gateway-conflict.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.123.1.20 |
hwEthernetARPLogAndTrapTimerThis object indicates the interval of log and trap. The default value is 0, which means no log and trap.rw Integer32 .1.3.6.1.4.1.2011.5.25.123.1.21 |
hwEthernetARPAntiAttackObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.123.1.22 |
hwEthernetARPAntiAttackIpAddressThis object indicates the IP address which is attacked.ro IpAddress .1.3.6.1.4.1.2011.5.25.123.1.22.1 |
hwEthernetARPAntiAttackMacAddressThis object indicates the MAC address which is attacked.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.123.1.22.2 |
hwEthernetARPAntiAttackVlanIdThis object indicates the VLAN ID which is attacked.ro Integer32 .1.3.6.1.4.1.2011.5.25.123.1.22.3 |
hwEthernetARPAntiAttackIfNameThis object indicates the interface name which is attacked.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.123.1.22.4 |
hwArpEntryGatewayConflictTableThe value of the object identifies the information about the source of the attack.
It contains IP address, MAC, VLAN ID and interface. SEQUENCE OF HwArpEntryGatewayConflictEntry .1.3.6.1.4.1.2011.5.25.123.1.23 |
hwArpEntryGatewayConflictEntryThe value of the object identifies the information about the source of the attack.
It contains IP address, MAC, VLAN ID and interface. HwArpEntryGatewayConflictEntry .1.3.6.1.4.1.2011.5.25.123.1.23.1 |
hwEthernetARPAntiGatewayConflictIndexThe index of the gateway conflict entries. Integer32 .1.3.6.1.4.1.2011.5.25.123.1.23.1.1 |
hwEthernetARPAntiGatewayConflictIpAddressThis object indicates the IP address is attacked.ro IpAddress .1.3.6.1.4.1.2011.5.25.123.1.23.1.2 |
hwEthernetARPAntiGatewayConflictMacAddressThis object indicates the MAC of the attack-source.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.123.1.23.1.3 |
hwEthernetARPAntiGatewayConflictVlanIdThis object indicates the VLAN ID of the attack-source.ro Integer32 .1.3.6.1.4.1.2011.5.25.123.1.23.1.4 |
hwEthernetARPAntiGatewayConflictIfNameThis object indicates the interface of the attack-source.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.123.1.23.1.5 |
hwArpSecValidateTableThe table contains the arp validation information on the interface. SEQUENCE OF HwArpSecValidateEntry .1.3.6.1.4.1.2011.5.25.123.1.24 |
hwArpSecValidateEntryThe entry contains the arp validation information on the interface. HwArpSecValidateEntry .1.3.6.1.4.1.2011.5.25.123.1.24.1 |
hwArpSecValidateIfIndexThe index of the arp validation entries. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.123.1.24.1.1 |
hwArpSecValidateSmacindicates check the source-mac of arp packet head and the ethernet packet head.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.123.1.24.1.2 |
hwArpSecValidateDmacindicates check the destination-mac of arp packet head and the ethernet packet head.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.123.1.24.1.3 |
hwArpSecValidateRowStatusThis object specifies the status of the arp validation table.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.123.1.24.1.51 |
hwARPGratuitousSendTableThe table contains the arp validation information on the interface. SEQUENCE OF HwARPGratuitousSendEntry .1.3.6.1.4.1.2011.5.25.123.1.25 |
hwARPGratuitousSendEntryThe entry contains the gratuitous arp send information on the vlanif interface. HwARPGratuitousSendEntry .1.3.6.1.4.1.2011.5.25.123.1.25.1 |
hwARPGratuitousSendIfIndexThe ifindex of the ARP gratuitous send configed. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.123.1.25.1.1 |
hwARPGratuitousSendEnableThis object indicates the status of the gratuitous-arp send.ro EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.123.1.25.1.2 |
hwARPArpGratuitousSendIntervalThis object indicates the interval of the gratuitous-arp send.
The value ranges from 1 to 86400, in second, with default value 90.ro Integer32 .1.3.6.1.4.1.2011.5.25.123.1.25.1.3 |
hwEthernetARPThresholdObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.123.1.26 |
hwEthernetARPThresholdValueThis object indicates the threshold of the alarm generated.ro Counter32 .1.3.6.1.4.1.2011.5.25.123.1.26.1 |
hwEthernetARPThresholdDynamicNumberThis object indicates the number of dynamic ARP entries.ro Counter32 .1.3.6.1.4.1.2011.5.25.123.1.26.2 |
hwEthernetARPThresholdStaticNumberThis object indicates the number of static ARP entries.ro Counter32 .1.3.6.1.4.1.2011.5.25.123.1.26.3 |
hwEthernetARPConflictDetectIndicates the ARP conflict detect. In this way, router can detect ARP entries conflict.rw Enumeration .1.3.6.1.4.1.2011.5.25.123.1.27 |
hwETHARPIPConflictObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.123.1.28 |
hwEthernetARPIPConflictIPAddressThis object indicates the conflict IP address.ro IpAddress .1.3.6.1.4.1.2011.5.25.123.1.28.1 |
hwEthernetARPIPConflictLocalInterfaceNameThis object indicates the interface before conflict.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.123.1.28.2 |
hwEthernetARPIPConflictLocalMACThis object indicates the MAC before conflict.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.123.1.28.3 |
hwEthernetARPIPConflictLocalVLANThis object indicates the VLAN before conflict.ro Integer32 .1.3.6.1.4.1.2011.5.25.123.1.28.4 |
hwEthernetARPIPConflictLocalCEVLANThis object indicates the CE VLAN before conflict.ro Integer32 .1.3.6.1.4.1.2011.5.25.123.1.28.5 |
hwEthernetARPIPConflictReceiveInterfaceNameThis object indicates the conflict interface.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.123.1.28.6 |
hwEthernetARPIPConflictReceiveMACThis object indicates the conflict MAC of the received packet.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.123.1.28.7 |
hwEthernetARPIPConflictReceiveVLANThis object indicates the VLAN of the received packet.ro Integer32 .1.3.6.1.4.1.2011.5.25.123.1.28.8 |
hwEthernetARPIPConflictReceiveCEVLANThis object indicates the CE VLAN of the received packet.ro Integer32 .1.3.6.1.4.1.2011.5.25.123.1.28.9 |
hwEthernetARPIPConflictTypeThis object indicates the conflict type.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.123.1.28.10 |
hwEthernetARPReceiveDstIPAddrThis object indicates the destination IP address of the received packet.ro IpAddress .1.3.6.1.4.1.2011.5.25.123.1.28.11 |
hwEthernetARPReceiveDstMACThis object indicates the destination MAC of the received packet.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.123.1.28.12 |
hwEthernetARPLearnStopTableThe value of the object identifies the parameters of ARP learning disable threshold.
hwEthernetARPLearnStopSlot: indicates the slot.
hwEthernetARPLearnStopThreshold: indicates the threshold usage of memory for learning ARP. SEQUENCE OF HwEthernetARPLearnStopEntry .1.3.6.1.4.1.2011.5.25.123.1.29 |
hwEthernetARPLearnStopEntryThe value of the object identifies the parameters of of ARP learning disable threshold.
hwEthernetARPLearnStopSlot: indicates the slot of the alarm generated.
hwEthernetARPLearnStopThreshold: indicates the threshold usage of memory for learning ARP. HwEthernetARPLearnStopEntry .1.3.6.1.4.1.2011.5.25.123.1.29.1 |
hwEthernetARPLearnStopSlotThis object indicates the the slot of the alarm generated.ro Integer32 .1.3.6.1.4.1.2011.5.25.123.1.29.1.1 |
hwEthernetARPLearnStopThresholdThis object indicates the threshold usage of memory for learning ARP.ro Counter32 .1.3.6.1.4.1.2011.5.25.123.1.29.1.2 |
hwArpStatisticsTableThe table contains the arp information of the interfaces. SEQUENCE OF HwArpStatisticsEntry .1.3.6.1.4.1.2011.5.25.123.1.30 |
hwArpStatisticsEntryThe entry contains the arp information of the interfaces. HwArpStatisticsEntry .1.3.6.1.4.1.2011.5.25.123.1.30.1 |
hwArpStatisticsSlotThe slot of ARP Statics Verbose. Integer32 .1.3.6.1.4.1.2011.5.25.123.1.30.1.1 |
hwArpStatisticsTypeThe Type of Interface Learn ARP. Enumeration .1.3.6.1.4.1.2011.5.25.123.1.30.1.2 |
hwArpStatisticsLearnedCountNumber of ARP entries learned by this type of interfaces.ro Counter32 .1.3.6.1.4.1.2011.5.25.123.1.30.1.3 |
hwArpStatisticsAvailableCountThe avaiable number of ARP entries of this type of interfaces.ro Counter32 .1.3.6.1.4.1.2011.5.25.123.1.30.1.4 |
hwEthernetARPRemoteBackupFailObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.123.1.31 |
hwEthernetARPRemoteBackupFailMainIfNameThis object indicates that the interface name with the remote ARP entry backup failure.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.123.1.31.1 |
hwEthernetARPNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.123.2 |
hwEthernetARPSpeedLimitAlarmTrap information about ARP speed limit: interface index, current configured limit number, current received number, limit type (ARP, ARP-MISS), source IP address, destination IP address, VPN instance. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.123.2.1 |
hwEthernetARPAntiAttackAlarmTrap information about ARP anti-attack: IP address, MAC, VLAN id, interface index. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.123.2.2 |
hwEthernetARPAntiGatewayConflictAlarmTrap information about ARP anti-attack: IP address, MAC, VLAN ID, interface index. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.123.2.3 |
hwEthernetARPThresholdExceedAlarmTrap information about ARP exceed threshold: slot, threshold, number of dynamic ARP, number of static ARP. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.123.2.4 |
hwEthernetARPThresholdResumeAlarmTrap information about ARP resume threshold: slot, threshold, number of dynamic ARP, number of static ARP. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.123.2.5 |
hwEthernetARPIPConflictEventTrap information about ARP IP conflict. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.123.2.6 |
hwEthernetARPMACIPConflictTrap information about MAC and IP address conflict: conflict interface name, conflict MAC address, conflict IP address, and the received packet's destination MAC address, destination IP address, vlan, ce-vlan, receive interface. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.123.2.7 |
hwEthernetARPMACIPConflictResolvedTrap information about MAC and IP address conflict resolved: conflict interface name, conflict MAC address, conflict IP address. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.123.2.8 |
hwEthernetARPLearnStopAlarmTrap information about ARP learning disable: memory usage threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.123.2.9 |
hwEthernetARPLearnResumeAlarmTrap information about ARP learning enable: memory usage threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.123.2.10 |
hwEthernetARPRemoteBackupFailAlarmTrap information about the remote ARP entry backup failure. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.123.2.11 |
hwEthernetARPRemoteBackupFailResumeAlarmTrap clearing information when the backup device detects that ARP entries are successfully backed up within a period. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.123.2.12 |
hwEthernetARPConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.123.3 |
hwEthernetARPGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.123.3.1 |
hwEthernetARPCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.123.3.2 |