HUAWEI-ENTITY-EXTENT-MIB
AI MIB Summary
The HUAWEI-ENTITY-EXTENT-MIB extends the standard ENTITY-MIB to expose vendor-specific physical extent attributes, such as logical grouping, chassis hierarchy, and component containment relationships, for Huawei network devices. This module enables precise inventory mapping and fault isolation by defining the structural topology of hardware components beyond the basic entity identification provided by standard SNMP.
The private mib file includes the general extent information of the device.
Main OID:
hwEntityExtentMIB.1.3.6.1.4.1.2011.5.25.31
326
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
326 total| Object Name |
|---|
hwEntityExtentMIBThe private mib file includes the general extent
information of the device. MODULE-IDENTITY .1.3.6.1.4.1.2011.5.25.31 |
hwEntityExtObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.31.1 |
hwEntityState OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.31.1.1 |
hwEntityStateTableThis table contains one row per physical entity, There is
always at least one row for an 'overall' physical entity.
The information in each row may be not include all the object
in this table, because of the entity need not some of the
information here. SEQUENCE OF HwEntityStateEntry .1.3.6.1.4.1.2011.5.25.31.1.1.1 |
hwEntityStateEntryInformation about a particular physical entity.
Each entry provides objects (entPhysicalDescr,
entPhysicalVendorType, and entPhysicalClass) to help an NMS
identify and characterize the entry, and objects
(entPhysicalContainedIn and entPhysicalParentRelPos) to help
an NMS relate the particular entry to other entries in this
table. HwEntityStateEntry .1.3.6.1.4.1.2011.5.25.31.1.1.1.1 |
hwEntityAdminStatusThe administrative state for this object, and it is possible to set
the state when needed.rw HwAdminState .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.1 |
hwEntityOperStatusThe operational state for this object.ro HwOperState .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.2 |
hwEntityStandbyStatusSome entity in a device can support standby mode,
This object is used for monitoring standby status.ro HwStandbyStatus .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.3 |
hwEntityAlarmLightThe alarm status for this entity. It does not include
the severity of alarms raised on child components. On
the condition, there are a alarm light on the entity,
the object should have the same status with it.ro HwAlarmStatus .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.4 |
hwEntityCpuUsageThe CPU usage for this entity. Generally, the CPU usage
will calculate the overall CPU usage on the entity, and it
is not sensible with the number of CPU on the entity.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.5 |
hwEntityCpuUsageThresholdThe threshold for the CPU usage. When the CPU usage exceed
the threshold, a notification will be sent.rw Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.6 |
hwEntityMemUsageThe memory usage for the entity. This object point out how
many percent of memory has been used.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.7 |
hwEntityMemUsageThresholdThe threshold for the Memory usage, When the memory usage
exceed the threshold, a notification will be sent.rw Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.8 |
hwEntityMemSizeThe size of memory for the entity.ro Integer32 UNITS "bytes" .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.9 |
hwEntityUpTimeThe up time for the entity. The mean of up time is
when the entity is up, and the value of the object
will add one per seconds while the entity running.ro Integer32 UNITS "seconds" .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.10 |
hwEntityTemperatureThe temperature for the entity. The value 0X7FFFFFF indicates invalid temperature.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.11 |
hwEntityTemperatureThresholdThe threshold for the temperature. When the temperature
exceeds the threshold, a notification will be sent.rw Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.12 |
hwEntityVoltageThe voltage for the entity.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.13 |
hwEntityVoltageLowThresholdThe low-threshold for the voltage. Generally, we have two
threshold for the voltage, one is low-threshold, and the other
is high-threshold. the normal status of voltage should be
greater than the low-threshold, and lower than the high-threshold.
When the voltage low than the low-threshold, a notification
will be sent.rw Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.14 |
hwEntityVoltageHighThresholdThe high-threshold for the voltage. Generally, we have two
threshold for the voltage, one is low-threshold, and the other
is high-threshold. the normal status of voltage should be
greater than the low-threshold, and lower than the high-threshold.
When the voltage greater than the high-threshold, a notification
will be sent.rw Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.15 |
hwEntityTemperatureLowThresholdThe low-threshold of temperature. If the device temperature is
lower than the threshold, an alarm is raised.rw Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.16 |
hwEntityOpticalPowerThe optical power of the optical module. Unit: uWro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.17 |
hwEntityCurrentThe current for the entity.ro Integer32 UNITS "A" .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.18 |
hwEntityMemSizeMegaThe size of SDRAM(Synchronous Dynamic Random Access Memory) memory for the entity. Unit: M bytesro Integer32 UNITS "M bytes" .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.19 |
hwEntityPortTypeIndicates the type of the Ethernet interface: an optical interface or an electrical interface.ro Enumeration .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.20 |
hwEntityDuplexIndicates the duplex mode of the Ethernet interface. An electrical Ethernet interface can
work in half-duplex mode or full-duplex mode. An optical Ethernet can work only in full-duplex mode.ro Enumeration .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.21 |
hwEntityOpticalPowerRxThe optical power(Rx) of the optical module. Unit: uWro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.22 |
hwEntityCpuUsageLowThresholdThe threshold for the CPU usage. When the CPU usage exceed
the threshold, a notification will be sent.rw Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.23 |
hwEntityBoardPowerThe board power for the entity. Unit: Wro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.24 |
hwEntityCpuFrequencyThe frequency of the entity. Unit: Hzro Integer32 UNITS "bytes" .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.25 |
hwEntitySupportFlexCardIt describes whether the whole board supports flexible cards. When
the board doesn't support flexible cards, the cards may be dummy ones
whose ports will not be seen by the customer.ro Enumeration .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.26 |
hwEntityBoardClassIt describes the board type of the whole board.ro Enumeration .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.27 |
hwNseOpmStatusOPM status. 0: pass, 1: bypass, 2: invalidro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.28 |
hwEntityCpuMaxUsageThe Max CPU usage for this entity. Generally, the Max CPU usage
will calculate the overall CPU usage on the entity, and it
is not sensible with the number of CPU on the entity.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.29 |
hwEntityCPUTypeCPU type.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.30 |
hwEntityMemoryTypeMemory type.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.31 |
hwEntityFlashSizeFlash size, in KB.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.32 |
hwEntityIfUpTimesTimes that the interface goes Up.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.33 |
hwEntityIfDownTimesTimes that the interface goes Down.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.34 |
hwEntityCPUAvgUsageAverage CPU usage within a specified statistical interval.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.35 |
hwEntityMemoryAvgUsageAverage memory usage within a specified statistical interval.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.36 |
hwEntityMemUsedThe memory information for the entity. This object indicates how
many bytes in the memory have been used.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.37 |
hwEntityTotalFanNumThe total numbers of the fans in the chassis .ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.38 |
hwEntityNomalFanNumThe Nomal numbers of the fans in the chassis .ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.39 |
hwEntityTotalPwrNumThe total numbers of the powers in the chassis .ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.40 |
hwEntityNomalPwrNumThe nomal numbers of the powers in the chassis .ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.41 |
hwEntityFaultLightThe repair status for this entity.
On the underrepair condition, there is a blue light on the entity.rw Enumeration .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.42 |
hwEntityBoardNameThe board name for this entity.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.43 |
hwEntityBoardDescriptionThe board description for this entity.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.44 |
hwEntity5MinCpuUsageAverage CPU usage of the last five minutes for this entity.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.45 |
hwEntityStartModeThe start mode of board.ro Enumeration .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.46 |
hwEntitySplitAttributeThe attribute for the split port.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.47 |
hwEntityFaultLightKeepTimeFault light twinkle keep time,the default is 45 seconds.rw Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.1.1.48 |
hwRUModuleInfoTableThis table contains one row per replaceable unit physical entity.
The row with the field 'entPhysicalIsFRU' sets to 'true' in
table 'entPhysicalTable' will be mapped to one row in this
table. SEQUENCE OF HwRUModuleInfoEntry .1.3.6.1.4.1.2011.5.25.31.1.1.2 |
hwRUModuleInfoEntryInformation about a replaceable unit physical entity.
Each entry provides objects of a replaceable unit to help
an NMS identify and characterize the entry in this table. HwRUModuleInfoEntry .1.3.6.1.4.1.2011.5.25.31.1.1.2.1 |
hwEntityBomIdThe identity of the Bill of Material about this replaceable
unit which coded by vendor. This node is mapping to 'ITEM'
in the information file.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2011.5.25.31.1.1.2.1.1 |
hwEntityBomEnDescThe English description of the Bill of Material about this
replaceable unit.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2011.5.25.31.1.1.2.1.2 |
hwEntityBomLocalDescThe local description of the Bill of Material about this
replaceable unit.roobsolete SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2011.5.25.31.1.1.2.1.3 |
hwEntityManufacturedDateThe date when this physical entity is Manufactured.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.31.1.1.2.1.4 |
hwEntityManufactureCodeThe code of the place where this physical entity is Manufactured.roobsolete Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.2.1.5 |
hwEntityCLEICodeThe string code of CLEI which was granted by America.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2011.5.25.31.1.1.2.1.6 |
hwEntityUpdateLogThe maintenance log of this replaceable unit.roobsolete SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2011.5.25.31.1.1.2.1.7 |
hwEntityArchivesInfoVersionThe Version of Archives Information.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2011.5.25.31.1.1.2.1.8 |
hwEntityOpenBomIdThe BomId for distribution. It is different from hwEntityBomId.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2011.5.25.31.1.1.2.1.9 |
hwEntityIssueNumThe issue number for hardware change.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2011.5.25.31.1.1.2.1.10 |
hwEntityBoardTypeThe type code for entity.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2011.5.25.31.1.1.2.1.11 |
hwOpticalModuleInfoTableTable of optical module properties. SEQUENCE OF HwOpticalModuleInfoEntry .1.3.6.1.4.1.2011.5.25.31.1.1.3 |
hwOpticalModuleInfoEntryAn entry in the table of optical module properties for each optical module. HwOpticalModuleInfoEntry .1.3.6.1.4.1.2011.5.25.31.1.1.3.1 |
hwEntityOpticalModeThe mode of the optical module.ro Enumeration .1.3.6.1.4.1.2011.5.25.31.1.1.3.1.1 |
hwEntityOpticalWaveLengthThe wave length of the optical module. Unit: nm.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.3.1.2 |
hwEntityOpticalTransDistanceThe max transmission distance of the optical module. Unit: m.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.3.1.3 |
hwEntityOpticalVendorSnThe vendor serial number (vendor SN) of the optical module. Length: 16 bytes.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2011.5.25.31.1.1.3.1.4 |
hwEntityOpticalTemperatureThe current temperature of the optical module. Unit: Cro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.3.1.5 |
hwEntityOpticalVoltageThe current voltage of the optical module. Unit: mV.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.3.1.6 |
hwEntityOpticalBiasCurrentThe bias current of the optical module. Unit: mA.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.3.1.7 |
hwEntityOpticalRxPowerThe receive power of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 timesro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.3.1.8 |
hwEntityOpticalTxPowerThe transmit power of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 timesro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.3.1.9 |
hwEntityOpticalTypeThe type of the optical module.ro Enumeration .1.3.6.1.4.1.2011.5.25.31.1.1.3.1.10 |
hwEntityOpticalTransBWThe Transceiver max BW of the optical module.Unit:Mro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.3.1.11 |
hwEntityOpticalFiberTypeThe Fiber type of the optical module.ro Enumeration .1.3.6.1.4.1.2011.5.25.31.1.1.3.1.12 |
hwEntityOpticalRxLowThresholdThe receive power low threshold of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 timesro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.3.1.13 |
hwEntityOpticalRxHighThresholdThe receive power high threshold of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 timesro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.3.1.14 |
hwEntityOpticalTxLowThresholdThe transmit power low threshold of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 timesro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.3.1.15 |
hwEntityOpticalTxHighThresholdThe transmit power high threshold of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 timesro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.3.1.16 |
hwEntityOpticalPlugThe optical module is plug-supported or not.ro Enumeration .1.3.6.1.4.1.2011.5.25.31.1.1.3.1.17 |
hwEntityOpticalDirectionTypeThe direction type of the optical module.ro Enumeration .1.3.6.1.4.1.2011.5.25.31.1.1.3.1.18 |
hwEntityOpticalUserEepromThe user writable EEPROM of the optical module.ro DisplayString .1.3.6.1.4.1.2011.5.25.31.1.1.3.1.19 |
hwEntityOpticalRxLowWarnThresholdThe receive power low warning threshold of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 timesro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.3.1.20 |
hwEntityOpticalRxHighWarnThresholdThe receive power high warning threshold of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 timesro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.3.1.21 |
hwEntityOpticalTxLowWarnThresholdThe transmit power low warning threshold of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 timesro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.3.1.22 |
hwEntityOpticalTxHighWarnThresholdThe transmit power high warning threshold of the optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 timesro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.3.1.23 |
hwEntityOpticalVenderNameThe Vender Name of the optical module.ro DisplayString .1.3.6.1.4.1.2011.5.25.31.1.1.3.1.24 |
hwEntityOpticalVenderPnThe Vender PN of the optical module.ro DisplayString .1.3.6.1.4.1.2011.5.25.31.1.1.3.1.25 |
hwEntityOpticalAuthenticationStatusThe authentication status of optical module.ro Enumeration .1.3.6.1.4.1.2011.5.25.31.1.1.3.1.26 |
hwEntityOpticalTunableTypeThe tunable type of the optical module.ro Enumeration .1.3.6.1.4.1.2011.5.25.31.1.1.3.1.27 |
hwEntityOpticalWaveLengthDecimalThe Decimal wavelength of the optical module. Unit: nm. The value is expanded 1000 times,so the real value should be reduced 1000 times.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.3.1.28 |
hwEntityOpticalTunableModuleChannelThe current channel of tunable optical module.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.3.1.29 |
hwEntityOpticalWaveBandThe wave band of the optical module.ro Enumeration .1.3.6.1.4.1.2011.5.25.31.1.1.3.1.30 |
hwEntityOpticalLaneBiasCurrentThe bias current of the QSFP or CFP optical module. Unit: mA.(e.g.,
37.88,39.15,39.84,37.82)ro SnmpAdminString .1.3.6.1.4.1.2011.5.25.31.1.1.3.1.31 |
hwEntityOpticalLaneRxPowerThe receive power of the QSFP or CFP optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times (e.g.,
114,32,-90,-228)ro SnmpAdminString .1.3.6.1.4.1.2011.5.25.31.1.1.3.1.32 |
hwEntityOpticalLaneTxPowerThe transmit power of the QSFP or CFP optical module. Unit: dBm. the value is expanded 100 times,so the real value should be reduced 100 times (e.g.,
94,-39,33,-58)ro SnmpAdminString .1.3.6.1.4.1.2011.5.25.31.1.1.3.1.33 |
hwEntityOpticalVendorOUIVendor ID of the optical module assigned by IEEE.ro DisplayString .1.3.6.1.4.1.2011.5.25.31.1.1.3.1.34 |
hwEntityOpticalVendorRevThe Vender Version of the optical module.ro DisplayString .1.3.6.1.4.1.2011.5.25.31.1.1.3.1.35 |
hwEntityOpticalGponSNThe SN of the optical module provided by the vendor.ro DisplayString .1.3.6.1.4.1.2011.5.25.31.1.1.3.1.36 |
hwMonitorInputTableThis table contains one row per replaceable unit physical entity.
This table is used to set the status of monitor port. SEQUENCE OF HwMonitorInputEntry .1.3.6.1.4.1.2011.5.25.31.1.1.4 |
hwMonitorInputEntryThis is a replaceable unit physical entity. HwMonitorInputEntry .1.3.6.1.4.1.2011.5.25.31.1.1.4.1 |
hwMonitorInputIndexMonitor port index.
This is a number of input line,ranging from 1 to 4. Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.4.1.1 |
hwMonitorInputNameMonitor line name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.31.1.1.4.1.2 |
hwMonitorInputStateMonitor line status.
The value is high or low.rw HWLevelState .1.3.6.1.4.1.2011.5.25.31.1.1.4.1.3 |
hwMonitorInputStateEnableEnable monitor line.rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.31.1.1.4.1.4 |
hwMonitorInputRowStatusStatus of monitor input row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.31.1.1.4.1.5 |
hwMonitorOutputTableThis table contains one row per replaceable unit physical entity.
This table is used to create a output view. SEQUENCE OF HwMonitorOutputEntry .1.3.6.1.4.1.2011.5.25.31.1.1.5 |
hwMonitorOutputEntryThis is a replaceable unit physical entity. HwMonitorOutputEntry .1.3.6.1.4.1.2011.5.25.31.1.1.5.1 |
hwMonitorOutputIndexMonitor output view index.
Through this index ,you can turn into the output view. Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.5.1.1 |
hwMonitorOutputRuleIndexMonitor output rule index.
This is used to set the rules about all of the input line. Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.5.1.2 |
hwMonitorOutputMaskMonitor output mask .
This is used to matching the level of monitor input line.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.31.1.1.5.1.3 |
hwMonitorOutputKeyNormal level value of this output line.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.31.1.1.5.1.4 |
hwMonitorOutputRowStatusStatus of monitor input rowrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.31.1.1.5.1.5 |
hwEntPowerUsedInfoTableA table of information that displays the power use of entity . SEQUENCE OF HwEntPowerUsedInfoEntry .1.3.6.1.4.1.2011.5.25.31.1.1.6 |
hwEntPowerUsedInfoEntryEntry of the table of information that displays the power use of entity. HwEntPowerUsedInfoEntry .1.3.6.1.4.1.2011.5.25.31.1.1.6.1 |
hwEntPowerUsedInfoBoardNameBoard name.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.31.1.1.6.1.1 |
hwEntPowerUsedInfoBoardTypeBoard type.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.31.1.1.6.1.2 |
hwEntPowerUsedInfoBoardSlotBoard's slot number.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.6.1.3 |
hwEntPowerUsedInfoPowerUsed power of board.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.6.1.4 |
hwVirtualCableTestTableThis table contains one row per replaceable unit physical entity.
This table is used to display VCT result. SEQUENCE OF HwVirtualCableTestEntry .1.3.6.1.4.1.2011.5.25.31.1.1.7 |
hwVirtualCableTestEntryThis is a replaceable unit physical entity. HwVirtualCableTestEntry .1.3.6.1.4.1.2011.5.25.31.1.1.7.1 |
hwVirtualCableTestIfIndexIfIndex of port that you want to test cable. InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2011.5.25.31.1.1.7.1.1 |
hwVirtualCableTestPairStatusPair status.
This indicate the status of cable.ro Enumeration .1.3.6.1.4.1.2011.5.25.31.1.1.7.1.2 |
hwVirtualCableTestPairLengthPair Length.
This indicate the length of cable.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.7.1.3 |
hwVirtualCableTestOperationVirtualCableTestOperation.
This Operation of VirtualCableTest.rw Enumeration .1.3.6.1.4.1.2011.5.25.31.1.1.7.1.4 |
hwVirtualCableTestLastTimeThe last test time for the entity. The mean of last time is
when the entity is tested, and the value of the object
will add one per seconds until now.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.7.1.5 |
hwVirtualCableTestPairAStatusPair A status.
This indicate the status of cable.ro Enumeration .1.3.6.1.4.1.2011.5.25.31.1.1.7.1.6 |
hwVirtualCableTestPairBStatusPair B status.
This indicate the status of cable.ro Enumeration .1.3.6.1.4.1.2011.5.25.31.1.1.7.1.7 |
hwVirtualCableTestPairCStatusPair C status.
This indicate the status of cable.ro Enumeration .1.3.6.1.4.1.2011.5.25.31.1.1.7.1.8 |
hwVirtualCableTestPairDStatusPair D status.
This indicate the status of cable.ro Enumeration .1.3.6.1.4.1.2011.5.25.31.1.1.7.1.9 |
hwVirtualCableTestPairALengthPair A Length.
This indicate the length of cable.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.7.1.10 |
hwVirtualCableTestPairBLengthPair B Length.
This indicate the length of cable.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.7.1.11 |
hwVirtualCableTestPairCLengthPair C Length.
This indicate the length of cable.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.7.1.12 |
hwVirtualCableTestPairDLengthPair D Length.
This indicate the length of cable.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.7.1.13 |
hwTemperatureThresholdTableThis table lists the alarm thresholds of temperature sensors.
You can read information about all the temperature sensors of the device.
You can set the alarm threshold of a specified temperature sensor. SEQUENCE OF HwTemperatureThresholdEntry .1.3.6.1.4.1.2011.5.25.31.1.1.8 |
hwTemperatureThresholdEntryDefines an entry in the hwTemperatureThresholdTable. HwTemperatureThresholdEntry .1.3.6.1.4.1.2011.5.25.31.1.1.8.1 |
hwEntityTempSlotIdThis object indicates the slot ID of a temperature sensor.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.8.1.1 |
hwEntityTempI2CIdThis object indicates the I2CID of a temperature sensor.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.8.1.2 |
hwEntityTempAddrThis object indicates the address of a temperature sensor.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.8.1.3 |
hwEntityTempChannelThis object indicates the channel of a temperature sensor.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.8.1.4 |
hwEntityTempStatusThis object indicates the current status of a temperature sensor.ro Enumeration .1.3.6.1.4.1.2011.5.25.31.1.1.8.1.5 |
hwEntityTempValueThis object indicates the current value in Celsius of a temperature sensor.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.8.1.6 |
hwEntityTempMinorAlmThresholdThis object indicates the threshold for a minor alarm. The value can be set and ranges from 80% to 120% of the default value. The value is in Celsius.rw Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.8.1.7 |
hwEntityTempMajorAlmThresholdThis object indicates the threshold for a major alarm. The value can be set and ranges from 80% to 120% of the default value. The value is in Celsius.rw Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.8.1.8 |
hwEntityTempFatalAlmThresholdThis object indicates the threshold for a fatal alarm. The value can be set and ranges from 80% to 120% of the default value. The value is in Celsius.rw Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.8.1.9 |
hwVoltageInfoTableThis table lists information about voltage sensors. You can read information about all the voltage sensors of the device. You can set the alarm threshold of a specified voltage sensor. SEQUENCE OF HwVoltageInfoEntry .1.3.6.1.4.1.2011.5.25.31.1.1.9 |
hwVoltageInfoEntryDefines an entry in the hwVoltageInfoTable. HwVoltageInfoEntry .1.3.6.1.4.1.2011.5.25.31.1.1.9.1 |
hwEntityVolSlotThis object indicates the slot ID of a voltage sensor.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.9.1.1 |
hwEntityVolI2CIdThis object indicates the I2CID of a voltage sensor.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.9.1.2 |
hwEntityVolAddrThis object indicates the address of a voltage sensor.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.9.1.3 |
hwEntityVolChannelThis object indicates the channel of a voltage sensor.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.9.1.4 |
hwEntityVolStatusThis object indicates the current status of a voltage sensor.ro Enumeration .1.3.6.1.4.1.2011.5.25.31.1.1.9.1.5 |
hwEntityVolRequiredThis object indicates the nominal value in millivolt of a voltage sensor.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.9.1.6 |
hwEntityVolCurValueThis object indicates the current value in millivolt of a voltage sensor.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.9.1.7 |
hwEntityVolRatioThis object indicates the voltage ratio of a voltage sensor.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.9.1.8 |
hwEntityVolLowAlmMajorThis object indicates the threshold for a major alarm of low voltage. The value can be set and ranges from 80% to 120% of the default value. The value is in millivolt.rw Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.9.1.9 |
hwEntityVolLowAlmFatalThis object indicates the threshold for a fatal alarm of low voltage. The value can be set and ranges from 80% to 120% of the default value. The value is in millivolt.rw Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.9.1.10 |
hwEntityVolHighAlmMajorThis object indicates the threshold for a major alarm of high voltage. The value can be set and ranges from 80% to 120% of the default value. The value is in millivolt.rw Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.9.1.11 |
hwEntityVolHighAlmFatalThis object indicates the threshold for a fatal alarm of high voltage. The value can be set and ranges from 80% to 120% of the default value. The value is in millivolt.rw Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.9.1.12 |
hwFanStatusTableThis table lists the status of fans. You can read the status of the fans on the device. SEQUENCE OF HwFanStatusEntry .1.3.6.1.4.1.2011.5.25.31.1.1.10 |
hwFanStatusEntryDefines an entry in the hwFanStatusTable. HwFanStatusEntry .1.3.6.1.4.1.2011.5.25.31.1.1.10.1 |
hwEntityFanSlotThis object indicates the slot ID of a fan.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.10.1.1 |
hwEntityFanSnThis object indicates the serial number of the fan in a certain slot.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.10.1.2 |
hwEntityFanRegThis object indicates whether the fan is registered.ro Enumeration .1.3.6.1.4.1.2011.5.25.31.1.1.10.1.3 |
hwEntityFanSpdAdjModeThis object indicates the speed adjustment mode of the fan.ro Enumeration .1.3.6.1.4.1.2011.5.25.31.1.1.10.1.4 |
hwEntityFanSpeedThis object indicates the rotation speed (in percentage of the full speed) of the fan.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.10.1.5 |
hwEntityFanPresentThis object indicates the present information of the fan.ro Enumeration .1.3.6.1.4.1.2011.5.25.31.1.1.10.1.6 |
hwEntityFanStateThis object indicates the state of the fan.ro Enumeration .1.3.6.1.4.1.2011.5.25.31.1.1.10.1.7 |
hwEntityFanDescThis object indicates the description of the fan.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.31.1.1.10.1.8 |
hwEntityGlobalPara OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.31.1.1.11 |
hwEntityServiceTypeIt describes the service-type of spu board .ro Enumeration .1.3.6.1.4.1.2011.5.25.31.1.1.11.1 |
hwDeviceServiceTypeIt describes the service-type of the device. bit0 is WLAN, bit1 is SSLVPN, bit2 is ipsec,other bits temporarily without easy back extension. Each bit 0 is disable, 1 is enable.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.11.2 |
hwEntityManufacturerOUIIt describes the Manufacturer of the device.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.11.3 |
hwPortBip8StatisticsTableIndicates the BIP8 statistics.
This table lists the various BIP8 statistics. SEQUENCE OF HwPortBip8StatisticsEntry .1.3.6.1.4.1.2011.5.25.31.1.1.12 |
hwPortBip8StatisticsEntryIndicates the BIP8 statistics.
This table lists the various BIP8 statistics. HwPortBip8StatisticsEntry .1.3.6.1.4.1.2011.5.25.31.1.1.12.1 |
hwPhysicalPortBip8StatisticsEBBIP8 Statistics: EB(Errored Block).ro Counter64 .1.3.6.1.4.1.2011.5.25.31.1.1.12.1.1 |
hwPhysicalPortBip8StatisticsESBIP8 Statistics: ES(Errored Second).ro Counter64 .1.3.6.1.4.1.2011.5.25.31.1.1.12.1.2 |
hwPhysicalPortBip8StatisticsSESBIP8 Statistics: SES(Severely Errored Second).ro Counter64 .1.3.6.1.4.1.2011.5.25.31.1.1.12.1.3 |
hwPhysicalPortBip8StatisticsUASBIP8 Statistics: UAS(Unavailable Errored Second).ro Counter64 .1.3.6.1.4.1.2011.5.25.31.1.1.12.1.4 |
hwPhysicalPortBip8StatisticsBBEBIP8 Statistics: BBE(Background Block Error).ro Counter64 .1.3.6.1.4.1.2011.5.25.31.1.1.12.1.5 |
hwPhysicalPortSpeedAn estimate of the interface's current bandwidth in
1000000 bits per second.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.31.1.1.12.1.6 |
hwStorageEntTableIndicates the Storage statistics SEQUENCE OF HwStorageEntEntry .1.3.6.1.4.1.2011.5.25.31.1.1.13 |
hwStorageEntEntryIndicates the Storage statistics.
This table lists the Entity Storage statistics. HwStorageEntEntry .1.3.6.1.4.1.2011.5.25.31.1.1.13.1 |
hwStorageEntIndexThe Index of Storage statistics.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.13.1.1 |
hwStorageEntTypeThe Type of Storage.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.13.1.2 |
hwStorageEntSpaceThe Size of Storage.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.13.1.3 |
hwStorageEntSpaceFreeThe Free Size of Storage.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.13.1.4 |
hwStorageEntNameThe Name of Storage.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2011.5.25.31.1.1.13.1.5 |
hwStorageEntDescrThe Description of Storage.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2011.5.25.31.1.1.13.1.6 |
hwSystemPowerTableSystem power infomation table. SEQUENCE OF HwSystemPowerEntry .1.3.6.1.4.1.2011.5.25.31.1.1.14 |
hwSystemPowerEntrySystem power infomation entry. HwSystemPowerEntry .1.3.6.1.4.1.2011.5.25.31.1.1.14.1 |
hwSystemPowerDeviceIDSystem power infomation device ID.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.14.1.1 |
hwSystemPowerTotalPowerSystem power infomation total power.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.14.1.2 |
hwSystemPowerUsedPowerSystem power infomation used power.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.14.1.3 |
hwSystemPowerRemainPowerSystem power infomation remain power.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.14.1.4 |
hwSystemPowerReservedPowerSystem power infomation reserved power.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.14.1.5 |
hwBatteryInfoTableDescription.Battery information table SEQUENCE OF HwBatteryInfoEntry .1.3.6.1.4.1.2011.5.25.31.1.1.15 |
hwBatteryInfoEntryDescription.Battery information entry HwBatteryInfoEntry .1.3.6.1.4.1.2011.5.25.31.1.1.15.1 |
hwBatteryStateDescription.The state of lithium battery.ro Enumeration .1.3.6.1.4.1.2011.5.25.31.1.1.15.1.1 |
hwBatteryTemperatureLowDescription.The lowest temperature of lithium battery.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.15.1.2 |
hwBatteryTemperatureHighDescription.The highest temperature of lithium battery.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.15.1.3 |
hwBatteryRemainPercentDescription. The remained electricity quantity percent of lithium battery,unit in minute.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.15.1.4 |
hwBatteryRemainTimeDescription. The remained time of lithium battery.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.15.1.5 |
hwBatteryElecTimesDescription.The charge and discharge times of lithium battery.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.15.1.6 |
hwBatteryLifeThresholdDescription.The warning threshold of lithium battery's lifetime.(unit in minute,the default value is 20)rw Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.15.1.7 |
hwGPSLocationInfo OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.31.1.1.16 |
hwGPSLongitudeDescription.The longitude of the device location.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.31.1.1.16.1 |
hwGPSLatitudeDescription.The latidude of the device location.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.31.1.1.16.2 |
hwGPSVelocityDescription.The velocity of the device.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.31.1.1.16.3 |
hwAdmPortTableThe table of ADM(Add/Drop Multiplexer) port properties. SEQUENCE OF HwAdmPortEntry .1.3.6.1.4.1.2011.5.25.31.1.1.17 |
hwAdmPortEntryThe entry of ADM(Add/Drop Multiplexer) port properties table. HwAdmPortEntry .1.3.6.1.4.1.2011.5.25.31.1.1.17.1 |
hwAdmPortDescriptionThe description of ADM(Add/Drop Multiplexer) port.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.31.1.1.17.1.1 |
hwPwrStatusTableThis table lists the status of powers. You can read the status of the powers on the device. SEQUENCE OF HwPwrStatusEntry .1.3.6.1.4.1.2011.5.25.31.1.1.18 |
hwPwrStatusEntryDefines an entry in the hwPwrStatusTable. HwPwrStatusEntry .1.3.6.1.4.1.2011.5.25.31.1.1.18.1 |
hwEntityPwrSlotThis object indicates the slot ID of a power.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.18.1.1 |
hwEntityPwrSnThis object indicates the serial number of the power in a certain slot.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.18.1.2 |
hwEntityPwrRegThis object indicates whether the power is registered.ro Enumeration .1.3.6.1.4.1.2011.5.25.31.1.1.18.1.3 |
hwEntityPwrModeThis object indicates the mode of the power.ro Enumeration .1.3.6.1.4.1.2011.5.25.31.1.1.18.1.4 |
hwEntityPwrPresentThis object indicates the present information of the power.ro Enumeration .1.3.6.1.4.1.2011.5.25.31.1.1.18.1.5 |
hwEntityPwrStateThis object indicates the state of the power.ro Enumeration .1.3.6.1.4.1.2011.5.25.31.1.1.18.1.6 |
hwEntityPwrCurrentThis object indicates the current of the power. Unit: mAro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.18.1.7 |
hwEntityPwrVoltageThis object indicates the voltage of the power. Unit: mVro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.1.18.1.8 |
hwEntityPwrDescThis object indicates the description of the power.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.31.1.1.18.1.9 |
hwEntityPhysicalSpecTable OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.31.1.2 |
hwEntityPhysicalSpecRackThe rack coefficient used for calculating the index of the physical entity.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.2.1 |
hwEntityPhysicalSpecFrameThe frame coefficient used for calculating the index of the physical entity.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.2.2 |
hwEntityPhysicalSpecSlotThe slot coefficient used for calculating the index of the physical entity.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.2.3 |
hwEntityPhysicalSpecBoardThe board coefficient used for calculating the index of the physical entity.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.2.4 |
hwEntityPhysicalSpecSubSlotThe sub slot coefficient used for calculating the index of the physical entity.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.2.5 |
hwEntityPhysicalSpecSubBoardThe sub board coefficient used for calculating the index of the physical entity.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.2.6 |
hwEntityPhysicalSpecPortThe port coefficient used for calculating the index of the physical entity.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.2.7 |
hwEntityPhysicalSpecEmuThe EMU(Environment monitoring unit) coefficient used for calculating the index of the physical entity.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.2.8 |
hwEntityPhysicalSpecPowerframeThe power frame coefficient used for calculating the index of the physical entity.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.2.9 |
hwEntityPhysicalSpecPowermoduleThe power module coefficient used for calculating the index of the physical entity.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.2.10 |
hwEntityPhysicalSpecBatteryThe battery coefficient used for calculating the index of the physical entity.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.1.2.11 |
hwEntityExtTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.31.2 |
hwEntityExtTrapsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.31.2.0 |
hwEntityExtTemperatureThresholdNotificationThe hwEntityEnvTemperatureThresholdNotification
indicates the temperature have been exceed the threshold.
In the condition, user should check the hardware and the
environment of the entity, sometimes it happened because
of the failture of air-condition. Anyway, the threshold
should lower than the value that most service work fine. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.31.2.0.1 |
hwEntityExtVoltageLowThresholdNotificationThe hwEntityExtVoltageLowThresholdNotification indicates
the voltage is lower than the threshold. This may decrease
the usability of the entity. If the voltage is lower too much
than the hardware needed, the entity will stop working.
Anyway, the threshold should higher than the value that
most service work fine. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.31.2.0.2 |
hwEntityExtVoltageHighThresholdNotificationThe hwEntityExtVoltageHighThresholdNotification indicates
the voltage is higher than the threshold. This may decrease
the usability of the entity. If the voltage is higher too much
than the hardware needed, the entity may be destroyed by the high
voltage. Anyway, the threshold should lower than the value
that most service work fine. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.31.2.0.3 |
hwEntityExtCpuUsageThresholdNotficationThe hwEntityExtCpuUsageThresholdNotfication indicates
the entity is overload, and the service running in the entity
will not get the performance it should because of CPU's
performance. Anyway, the threshold should lower than the
value that most service work fine. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.31.2.0.4 |
hwEntityExtMemUsageThresholdNotificationThe hwEntityExtMemUsageThresholdNotification indicates
the entity is overload, and the service running in the entity
will not get the performance it should because of lower
memory. Anyway, the threshold should lower than the
value that most service work fine. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.31.2.0.5 |
hwEntityExtOperEnabledThe entity is operational. The entity this
notification refers can be identified by
extracting the entPhysicalIndex from one of the
variable bindings. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.31.2.0.6 |
hwEntityExtOperDisabledThe entity is operational. The entity this
notification refers can be identified by
extracting the entPhysicalIndex from one of the
variable bindings. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.31.2.0.7 |
hwEntityExtMonitorBoardAbnormalNotificationThe monitor board turns normal to abnormal. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.31.2.0.8 |
hwEntityExtMonitorBoardNormalNotificationThe monitor board turns abnormal to normal. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.31.2.0.9 |
hwEntityExtMonitorPortAbnormalNotificationThe monitor port turns normal to abnormal. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.31.2.0.10 |
hwEntityExtMonitorPortNormalNotificationThe monitor port turns abnormal to normal. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.31.2.0.11 |
hwEntityExtCpuUsageLowThresholdNotficationThe hwEntityExtCpuUsageThresholdNotfication indicates
the entity is overload, and the service running in the entity
will not get the performance it should because of CPU's
performance. Anyway, the threshold should lower than the
value that most service work fine. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.31.2.0.12 |
hwEntityExtTrapObject OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.31.2.1 |
hwEntityExtTrapBaseSoftwareVersionSystem bassic software version.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.31.2.1.1 |
hwEntityExtTrapBoardSoftwareVersionBoard software version compare to basic software version.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.31.2.1.2 |
hwPhysicalNameThe textual name of the physical entity. The value of this
object should be the name of the component as assigned by
the local device and should be suitable for use in commands
entered at the device's `console'. This might be a text
name, such as `console' or a simple component number (e.g.,
port or module number), such as `1', depending on the
physical component naming syntax of the device.
If there is no local name, or this object is otherwise not
applicable, then this object contains a zero-length string.
Note that the value of entPhysicalName for two physical
entities will be the same in the event that the console
interface does not distinguish between them, e.g., slot-1
and the card in slot-1.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.31.2.1.3 |
hwEntityExtTrap OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.31.2.2 |
hwBoardSoftwareVersionIncompatibleBoard software version incompatible with basic software version. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.31.2.2.1 |
hwBoardSplitPortsWhen the split ports exist on the board, send a SNMP trap to network manager. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.31.2.2.2 |
hwDevicePowerInfoObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.31.3 |
hwDevicePowerInfoTotalPowerDevice total power.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.3.1 |
hwDevicePowerInfoUsedPowerDevice used power.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.3.2 |
hwEntityExtConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.31.4 |
hwEntityExtCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.31.4.1 |
hwEntityExtGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.31.4.2 |
hwPnpObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.31.5 |
hwPnpInfo OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.31.5.1 |
hwHardwareCapaSequenceNoThis object indicates the sequence number of the 'hardware capability file'.The value consists of the file version number and CRC code.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2011.5.25.31.5.1.1 |
hwAlarmPnPSequenceNoThis object indicates the sequence number of the 'alarm capability file'.The value consists of the file version number and CRC code.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2011.5.25.31.5.1.2 |
hwPnpTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.31.5.2 |
hwHardwareCapaChangeNotificationThis object indicates the change of the 'hardware capability file'. An alarm is generated if the sequence number of the 'hardware capability file' in the current startup file is different from that in the last startup file. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.31.5.2.1 |
hwAlarmPnPChangeNotificationThis object indicates the change of the 'alarm capability file'. An alarm is generated if the sequence number of the 'alarm capability file' in the current startup file is different from that in the last startup file. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.31.5.2.2 |
hwPnpOperateTableThis table describes the hardware functions. Using this table, you can obtain the specified 'hardware description file' or 'hardware capability file'. SEQUENCE OF HwPnpOperateEntry .1.3.6.1.4.1.2011.5.25.31.5.3 |
hwPnpOperateEntry HwPnpOperateEntry .1.3.6.1.4.1.2011.5.25.31.5.3.1 |
hwFileGeneIndexThe value of this object identifies the operation index, which can be specified by the user.
The value ranges from 1 to 2147483647. Integer32 .1.3.6.1.4.1.2011.5.25.31.5.3.1.1 |
hwFileGeneOperStateThe value of this object identifies the operation status.
opInProgress(1): The operation is ongoing.
opSuccess(2): The operation succeeds.
opGetFileError(3): Obtaining the file fails.
opInvalidDestName(4): The specified storage path is invalid.
opNoFlashSpace(5): The space in the flash memory is insufficient.
opWriteFileError(6): Writing the file fails.
opDestoryError(7): Deleting the file fails.ro Enumeration .1.3.6.1.4.1.2011.5.25.31.5.3.1.2 |
hwFileGeneResourceTypeThis object indicates the type of the file to be obtained.
pnpcard(1): board description file
pnpcard(2): subcard description file
pnphardcapability(3): hardware capability file
pnpPreDisposeCapability(4): predispose capability file
pnpframe(5):frame description file
pnpdevtype(6):device description file
pnpalarm(7):alarm description filerw Enumeration .1.3.6.1.4.1.2011.5.25.31.5.3.1.3 |
hwFileGeneResourceIDThis object indicates the ID of the 'hardware capability file' to be obtained.rw SnmpAdminString .1.3.6.1.4.1.2011.5.25.31.5.3.1.4 |
hwFileGeneDestinationFileThis object indicates the target path storing the file, which does not need to be specified.rw SnmpAdminString .1.3.6.1.4.1.2011.5.25.31.5.3.1.5 |
hwFileGeneRowStatusThis object indicates the row status.
active(1)
notInService(2)
notReady(3)
createAndGo(4)
createAndWait(5)
destroy(6)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.31.5.3.1.6 |
hwSystemGlobalObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.31.6 |
hwEntitySystemNetIDNetwork element ID.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.31.6.1 |
hwEntitySoftwareNameSystem software name.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2011.5.25.31.6.2 |
hwEntitySoftwareVersionSoftware version number.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2011.5.25.31.6.3 |
hwEntitySoftwareVendorSoftware vendor.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2011.5.25.31.6.4 |
hwEntitySystemModelDevice model.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2011.5.25.31.6.5 |
hwEntitySystemTimeSystem time displayed on the device.rw SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2011.5.25.31.6.6 |
hwEntitySystemMacAddressMAC address of the device.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2011.5.25.31.6.7 |
hwEntitySystemResetSystem reset.rw Enumeration .1.3.6.1.4.1.2011.5.25.31.6.8 |
hwEntitySystemHealthIntervalStatistical interval for average CPU and memory usage, in seconds (By default, the value is 300) .rw Integer32 .1.3.6.1.4.1.2011.5.25.31.6.9 |
hwEntitySystemNEIdSystme NEId.rw Integer32 .1.3.6.1.4.1.2011.5.25.31.6.10 |
hwEntitySystemServiceTypeSystem service type.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2011.5.25.31.6.11 |
hwHeartbeatObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.31.7 |
hwHeartbeatConfig OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.31.7.1 |
hwEntityHeartbeatOnOffWhether Heartbeat sending periodically enabled.rw Enumeration .1.3.6.1.4.1.2011.5.25.31.7.1.1 |
hwEntityHeartbeatPeriodHeartbeat sending period detected in the trap reporting channel, with the minimum value of 60 seconds.rw Integer32 .1.3.6.1.4.1.2011.5.25.31.7.1.2 |
hwHeartbeatTrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.31.7.2 |
hwEntityHeartbeatTrapHeartbeat trap. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.31.7.2.1 |
hwPreDisposeObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.31.8 |
hwPreDisposeInfo OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.31.8.1 |
hwPreDisposeSequenceNoThis object indicates the sequence number of the 'predispose capability file'.The value consists of the file version number and CRC code.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2011.5.25.31.8.1.1 |
hwPreDisposedTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.31.8.2 |
hwInsertDiffFromPreDisposedThis object indicates the type of the inserted entity is different from that of pre-disposed entity on the slot. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.31.8.2.1 |
hwPreDisposedChangeNotificationThis object indicates the change of the 'predispose capability file'. An alarm is generated if the sequence number of the 'predispose capability file' in the current startup file is different from that in the last startup file. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.31.8.2.2 |
hwPreDisposeConfigTableTable of predisposing boards or flexible subcards. SEQUENCE OF HwPreDisposeConfigEntry .1.3.6.1.4.1.2011.5.25.31.8.3 |
hwPreDisposeConfigEntryEntry of the table to predispose boards or flexible subcards. HwPreDisposeConfigEntry .1.3.6.1.4.1.2011.5.25.31.8.3.1 |
hwDisposeSlotThis object indicates the slot ID of predisposed board.rw Integer32 .1.3.6.1.4.1.2011.5.25.31.8.3.1.1 |
hwDisposeCardIdThis object indicates the card ID of predisposed subcard.rw Integer32 .1.3.6.1.4.1.2011.5.25.31.8.3.1.2 |
hwDisposeSbomThis object indicates the sbom information of predisposed board or subcard.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.31.8.3.1.3 |
hwDisposeRowStatusThis object indicates the row status when config predispose.
active(1)
notInService(2)
notReady(3)
createAndGo(4)
createAndWait(5)
destroy(6)rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.31.8.3.1.4 |
hwDisposeOperStateThe value of this object identifies the operation status.
opSuccess(1): The operation succeeds.
opInProgress(2): The operation is ongoing.
opDevNotSupportPredispose(3): The device does not support predispose.
opCardNotSupportPredispose(4): The type of card or subcard is not supported to be predisposed on this device.
opAlreadyPredispose(5): The slot or subslot has already been predisposed.
opCardConflict(6): The slot or subslot to be predisposed conflict with others.
opDevOperationError(7): Other error occurs on the device.ro Enumeration .1.3.6.1.4.1.2011.5.25.31.8.3.1.5 |
hwPreDisposeEntInfoTableThis table is used to get the information of predisposed entitys. SEQUENCE OF HwPreDisposeEntInfoEntry .1.3.6.1.4.1.2011.5.25.31.8.4 |
hwPreDisposeEntInfoEntryEntry of the table to get the information of predisposed entitys. HwPreDisposeEntInfoEntry .1.3.6.1.4.1.2011.5.25.31.8.4.1 |
hwDisposeEntPhysicalIndexThe index for this entry.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2011.5.25.31.8.4.1.1 |
hwDisposeEntPhysicalDescrA textual description of predisposed physical entity.This object
should contain a string which identifies the manufacturer's
name for the physical entity.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2011.5.25.31.8.4.1.2 |
hwDisposeEntPhysicalVendorTypeAn indication of the vendor-specific hardware type of the
predisposed physical entity.ro AutonomousType (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.31.8.4.1.3 |
hwDisposeEntPhysicalContainedInThe value of 'entPhysicalContainedIn' for the predisposed physical entity.ro Integer32 .1.3.6.1.4.1.2011.5.25.31.8.4.1.4 |
hwDisposeEntPhysicalClassAn indication of the general hardware type of the predisposed physical entity.ro PhysicalClass (ENTITY-MIB) .1.3.6.1.4.1.2011.5.25.31.8.4.1.5 |
hwDisposeEntPhysicalParentRelPosAn indication of the relative position of this 'child' component among all its 'sibling' components.ro Integer32 (-1..2147483647) .1.3.6.1.4.1.2011.5.25.31.8.4.1.6 |
hwDisposeEntPhysicalNameThe textual name of the predisposed physical entity.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2011.5.25.31.8.4.1.7 |
hwOSPUnifyManageObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.31.9 |
hwEntityExtOSPTrapsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.31.9.1 |
hwEntityExtUnconnectedBoard become unconnected for some reason. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.31.9.1.1 |
hwEntityExtUnconnectedResumeBoard resume from unconnected NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.31.9.1.2 |