HUAWEI-DC-TRAP-MIB
AI MIB Summary
The HUAWEI-DC-TRAP-MIB defines the structure for asynchronous SNMP trap notifications generated by Huawei DataCenter network devices to report critical operational events and fault conditions. This module enables network management systems to parse and correlate specific hardware failures, link state changes, and system alerts within the DataComm infrastructure.
The HUAWEI-DC-TRAP-MIB provides information about DataComm TRAPS.
Main OID:
hwDCTrapMIB.1.3.6.1.4.1.2011.5.25.37
137
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
137 total| Object Name |
|---|
hwDCTrapMIBThe HUAWEI-DC-TRAP-MIB provides information about DataComm TRAPS. MODULE-IDENTITY .1.3.6.1.4.1.2011.5.25.37 |
SNMPv2-CONFThe HUAWEI-DC-TRAP-MIB provides information about DataComm TRAPS. Unknown .1.3.6.1.4.1.2011.5.25.37 |
hwDCTrapControl OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.37.1 |
hwDCCtrlTrapA string serving as a bit map for the trap
events defined by the hwDatacomm traps. This
object is used to enable and disable specific
hwDatacomm traps where a 1 in the bit field
represents enabled. The right-most bit (least
significant) represents trap 0.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.37.1.1 |
hwTunnelGroupIDTunnel idro Integer32 .1.3.6.1.4.1.2011.5.25.37.1.2 |
hwDCTrapReasonFor the BTB system to report Trap Reason.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.37.1.3 |
hwDCTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.37.2 |
hwMPUSynClkFaultyMPU sync clock signal faulty! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.1 |
hwMPUSynClkFaultyResumeMPU sync clock signal faulty resume! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.2 |
hwSlaveMPUNoRespSlave MPU has no response! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.3 |
hwSlaveMPUNoRespResumeSlave MPU has no response resume! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.4 |
hwBrdChannelFaultyBoard channel faulty! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.5 |
hwBrdChannelFaultyResumeBoard channel faulty resume! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.6 |
hwBrdNofullinBoard not full in! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.7 |
hwBrdNofullinResumeBoard not full in resume! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.8 |
hwBrdTypeNoMatchResetBoard is reset because of the chip type is not matching! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.9 |
hwBrdAutoSwtFailBoard automatically switch syn-clock but it locked failed! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.10 |
hwBrdAutoSwtBoard automatically switch syn-clock! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.11 |
hwBrdClkLockERRBoard fabric clock is unlocked! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.12 |
hwBrdClkLockERRResumeBoard fabric clock unlock to current clock resume! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.13 |
hwBrdRemovedBoard pulled out! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.14 |
hwBrdInsertedBoard plugged in! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.15 |
hwBrdUpBoard register! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.16 |
hwClkSrcMissCLK source Loss Of Signal! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.17 |
hwClkAllSrcLostCLK all source lost! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.18 |
hwClkAllSrcLostResumeCLK all source lost resume! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.19 |
hwClkFailCLK hardware failed! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.20 |
hwClkFailResumeCLK hardware failed resume! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.21 |
hwClkNoHeartbeatCLK No Heartbeat! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.22 |
hwClkNoHeartbeatResumeCLK No Heartbeat resume! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.23 |
hwLPULostSynAlarmLPU SERDES interface is lost synchronization! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.24 |
hwLPUOpenChannelErrorLPU SERDES interface open error! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.25 |
hwLPUSlfTstErrLPU self test error! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.26 |
hwLPU3ClkSwitchLPU 3 class clock is switch! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.27 |
hwSFULostHrtResetSFU is reset because of heart beat loss! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.28 |
hwSFULinkLostResetSFU is reset because of SERDES interface input channel link lost numbers over threshold! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.29 |
hwSFUChannelLinkLostSFU check SERDES interface input channel link lost! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.30 |
hwSFUInChannelOpenFailSFU SERDES interface input channel is opened failed! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.31 |
hwVoltSensorFailBoard voltage monitor failure! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.32 |
hwVoltSensorFailResumeBoard voltage monitor failure resume! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.33 |
hwVoltBtmCBoard voltage below fatal threshold! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.34 |
hwVoltBtmCResumeBoard voltage below fatal threshold resume! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.35 |
hwVoltSprCBoard voltage over fatal threshold! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.36 |
hwVoltSprCResumeBoard voltage over fatal threshold resume! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.37 |
hwVoltBtmMBoard voltage below major threshold! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.38 |
hwVoltBtmMResumeBoard voltage below major threshold resume! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.39 |
hwVoltSprMBoard voltage over major threshold! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.40 |
hwVoltSprMResumeBoard voltage over major threshold resume! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.41 |
hwTempSensorFailBoard temprature monitor failure! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.42 |
hwTempSensorFailResumeBoard temperature monitor failure resume! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.43 |
hwTempMnrBoard temperature over minor threshold! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.44 |
hwTempMnrResumeBoard temperature over minor threshold resume! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.45 |
hwTempMjrBoard temperature over major threshold! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.46 |
hwTempMjrResumeBoard temperature over major threshold resume! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.47 |
hwTempCtlBoard temperature over fatal threshold! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.48 |
hwTempCtlResumeBoard temperature over fatal threshold resume! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.49 |
hwFanHFailFan hardware failure! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.50 |
hwFanFailFan failure! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.51 |
hwFanFailResumeFan failure resume! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.52 |
hwFanAbsentFan absent! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.53 |
hwFanAbsentResumeFan absent resume! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.54 |
hwFanCabUNFan cable unplugged! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.55 |
hwFanCabUNResumeFan cable unplugged resume! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.56 |
hwPwrFailPower failure! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.57 |
hwPwrFailResumePower failure resume! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.58 |
hwPwrAbsentPower absent! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.59 |
hwPwrAbsentResumePower absent resume! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.60 |
hwPwrCabUNPower monitor cable unplugged! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.61 |
hwPwrCabUNResumePower monitor cable unplugged resume! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.62 |
hwLCDHFailLCD hardware failure! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.63 |
hwLCDFailLCD failure! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.64 |
hwLCDAbsentLCD absent! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.65 |
hwLCDAbsentResumeLCD absent resume! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.66 |
hwLCDCabUNLCD cable unplugged! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.67 |
hwLCDCabUNResumeLCD cable unplugged resume! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.68 |
hwROMFailEEPROM failure! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.69 |
hwMonitorBUSFailMonitorBUS failure! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.70 |
hwMonitorBUSFailResumeMonitorBUS failure resume! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.71 |
hwBoardOfflineChangeBoard power status change! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.72 |
hwWriteFlashErrorwrite flash error! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.100 |
hwBoardResetboard reset! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.101 |
hwBoardResetSuccessboard reset success! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.102 |
hwSlaveMPUResetslave MPU reset ! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.103 |
hwMasterSlaveSwapmaster slave swap! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.104 |
hwRTCFailRTC failure! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.105 |
hwExchangeChipFail5695 exchange chip fail! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.106 |
hwTempResumeBoard temprature over threshold resume! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.107 |
hwOpticalModuleInsertoptical module plug in ! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.108 |
hwOpticalModuleRemoveoptical module plug out ! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.109 |
hwFPGAAbnormalFPGA abnormal ! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.110 |
hwMinMTunnelDownAlarmFor Mac in Mac tunnel. Mac tunnel have two status: up or down, when physical interface is down or some cc package
can't arrive to the other side of mac in mac tunnel, the status of tunnel will be down
1 Notice/Trap name: Tunnel down
2 Notice/Trap generation cause: when All mac tunnel have been down in the mac tunnel group
3 Repair suggestions:
make one of the mac tunnel up in the mac tunnel group NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.111 |
hwMinMTunnelUpAlarmFor Mac in Mac tunnel. Mac tunnel have two status: up or down, if cc package can arrive to the other side of mac
in mac tunnel, the status of tunnel will be up
1 Notice/Trap name: Tunnel up
2 Notice/Trap generation cause: one of the tunnel is up in the mac tunnel group
3 Repair suggestion: NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.112 |
hwInterfacePhysicalDownThis trap is to indicate port link down on physical layer. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.113 |
hwInterfacePhysicalUpThis trap is to indicate port link up on physical layer. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.114 |
hwBTBStartupFileNameDifferentIn the BTB system ,the start-up file name of master and slave chassis is different .
Used for BTB or its extend system. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.119 |
hwBTBChassisRunningModeConflictThe Master and Slave chassises running modes conflict.Used for BTB or its extend system. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.120 |
hwBTBCtrlChannelFailThe FE control channel failture, as physical link from up to down or channel blocked.
Used for BTB or its extend system. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.121 |
hwBTBCtrlChannelFailResumeThe FE control channel failture resume.Used for BTB or its extend system. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.122 |
hwBTBDataChannelFailThe data channel failture, all optical links down between chassises.Used for BTB or its extend system. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.123 |
hwBTBDataChannelFailResumeThe data channel failture resume.Used for BTB or its extend system. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.124 |
hwBTBClkChannelFailThe clock channel failture, clock link down between chassises.Used for BTB or its extend system. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.125 |
hwBTBClkChannelFailResumeThe clock Channel failture resume.Used for BTB or its extend system. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.126 |
hwBTBSFUOpticInterfaceErrorThe optical fiber connection error, the connection of SFU fiber between chassises is not correct.
Used for BTB or its extend system. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.127 |
hwBTBSFUOpticInterfaceErrorResumeThe optical fiber connection error resume.Used for BTB or its extend system. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.128 |
hwBTBVSRInterfaceInvalidThe SFU VSR(very short reach) interface invalid.Used for BTB or its extend system. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.129 |
hwBTBVSRInterfaceInvalidResumeThe SFU VSR(very short reach) interface invalid resume.Used for BTB or its extend system. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.130 |
hwBTBSlaveChassisNoHeartThe slave chassis no heart.Used for BTB or its extend system. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.131 |
hwBTBNoSlaveChassisNo slave chassis connected to the master chassis in the BTB system.Used for BTB or its extend system. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.132 |
hwBTBSlaveChassisRegistedThe slave chassis registe successful.Used for BTB or its extend system. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.133 |
hwBTBSlaveChassisRegisteFailThe slave chassis registe failed.Used for BTB or its extend system. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.134 |
hwBTBChassisTypeConflictThe chassis information conflict in the PAF and Nvram.Used for BTB or its extend system. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.135 |
hwSuperChangeSuccesfulSuper change successful. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.136 |
hwSuperChangeFailureSuper change Failure. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.137 |
hwOpticaPowerAbnormalOptical Transceiver power abnormal. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.138 |
hwEpldAbnormalEpld logic abnormal. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.139 |
hwPhyChipAbnormalPHY chip is abnormal. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.140 |
hwSerdesAbnormalSerdes interface of PHY chip abnormal. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.141 |
hwBoardAbnormalBoard is abnormal. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.142 |
hwFeChannelAbnormalFE data channel is abnormal NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.143 |
hwParityCheckAbnormalData parity check is abnormal NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.144 |
hwPhyClockAbnormalThe clock of PHY chip is abnormal. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.145 |
hwPortAutoNegotiateFailThe ethernet port negotiate failed NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.146 |
hwPortSemiduplexThe ethernet port work at semi duplex state. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.147 |
hwScuStartModeSetFailThe start mode of SCU set failed NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.148 |
hwMemoryExhaustMPU memory exhaust. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.149 |
hwMemoryExhaustClearMPU memory usage resume to normal. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.150 |
hwMethAbnormalThe Meth interface is abnormal. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.151 |
hwLpuNotTightThe LPU board is not tightly installed. Install the board again. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.152 |
hwLicenseFailLicense fail. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.153 |
hwHaBatchBeginNo command line can be entered because batch backup is processing. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.154 |
hwHaBatchEndCommand lines can be entered because batch backup ends. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.155 |
hwHaSmoothBeginNo command line can be entered because data smooth is processing. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.156 |
hwHaSmoothEndCommand lines can be entered because data smooth ends. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.157 |
hwFanUpFan register! NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.37.2.158 |
hwDCTrapConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.37.3 |
hwDCTrapGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.37.3.1 |
hwDCTrapCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.37.3.2 |