HUAWEI-BFD-MIB
AI MIB Summary
The HUAWEI-BFD-MIB module provides SNMP-based configuration and monitoring capabilities for Bidirectional Forwarding Detection (BFD) sessions on Huawei network devices, enabling the rapid detection of link or system failures through the management of BFD control packet intervals and session states.
MIB interface of BFD protocol configuration. The Bidirectional Forwarding Detection (BFD) protocol is standardized by the IETF. BFD detects the traffic forwarding capability of the link or system by quickly sending BFD control packets (the UDP packets in a specified format) at intervals between two nodes.
Main OID:
hwBFDMIB.1.3.6.1.4.1.2011.5.25.38
206
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
206 total| Object Name |
|---|
hwBFDMIBMIB interface of BFD protocol configuration.
The Bidirectional Forwarding Detection (BFD) protocol
is standardized by the IETF. BFD detects the
traffic forwarding capability of the link or system by
quickly sending BFD control packets (the UDP packets in
a specified format) at intervals between two nodes. MODULE-IDENTITY .1.3.6.1.4.1.2011.5.25.38 |
hwBfdScalarsObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.38.1 |
hwBfdVersionNumberThe current version number of the BFD protocol is 1.
Default: 1ro Unsigned32 .1.3.6.1.4.1.2011.5.25.38.1.1 |
hwBfdAdminStatusDescribe the administrative status of a BFD protocol.
Options:
1. enabled(1) -denotes that the BFD Process is active on all interface
2. disabled(2) -denotes that the BFD process is disabled on all interfaces
Default: 2rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.38.1.2 |
hwBfdSessLimitNumberDefine the maximum number of BFD sessions allowed in the logic router.
Default: 0ro Unsigned32 .1.3.6.1.4.1.2011.5.25.38.1.3 |
hwBfdSessInterfaceLimitNumberDefine the maximum number of BFD sessions allowed per board.
Default: 0ro Unsigned32 .1.3.6.1.4.1.2011.5.25.38.1.4 |
hwBfdSessStaticNumberThe total number of BFD static sessions.
Default: 0ro Unsigned32 .1.3.6.1.4.1.2011.5.25.38.1.5 |
hwBfdSessDynamicNumberThe total number of BFD dynamic sessions.
Default: 0ro Unsigned32 .1.3.6.1.4.1.2011.5.25.38.1.6 |
hwBfdSessGlobalDefaultIpAddrDefine the default multicast IP address used in BFD multicast detection.
Default: 0rw IpAddress .1.3.6.1.4.1.2011.5.25.38.1.7 |
hwBfdEchoPassiveStatusThe passive Echo function of BFD.
Options:
1. enabled(1) -denotes that the BFD EchoPassive capability is enabled
2. disabled(2) -denotes that the BFD EchoPassive capability is disabled
Default: 2rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.38.1.8 |
hwBfdEchoAclNumThe Acl Number for passive Echo function of BFD.
Default: 0rw Unsigned32 (0 | 2000..2999) .1.3.6.1.4.1.2011.5.25.38.1.9 |
hwBfdSessDynamicPingIntervalDefine the sending interval of the MPLS echo packet.
Default: 60
Unit: secondrw Unsigned32 .1.3.6.1.4.1.2011.5.25.38.1.10 |
hwBfdSessDynamicSupportPassiveThe capability of automatically creating BFD sessions on the LSP egress.
Options:
1. enabled(1) -denotes that the egress can create BFD sessions
2. disabled(2) -denotes that the egress can not create BFD sessions
Default: 2rw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.38.1.11 |
hwBfdSessDelayUpTimeDefine delay interval before the session turns to up.
Unit: second
Default: 0rw Unsigned32 .1.3.6.1.4.1.2011.5.25.38.1.12 |
hwBfdSessMultiDstPortThe destination UDP port of multi-hop BFD session. When the
administrative status of BFD protocol is disabled, this value
will be 0.
Default: 3784rw Integer32 (0|3784|4784) .1.3.6.1.4.1.2011.5.25.38.1.13 |
hwBfdTrapSendIntervalDefine the sending interval of TRAP message.
Unit: second
Default: 120rw Integer32 (0|1..600) .1.3.6.1.4.1.2011.5.25.38.1.14 |
hwBfdLimitDeviceNameThe device name which session number reached up limit.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.38.1.15 |
hwBfdDynamicSessionTosThe Tos-Exp of dynamic session.
Default: 7rw Unsigned32 .1.3.6.1.4.1.2011.5.25.38.1.16 |
hwBfdStaticSessionTosThe Tos-Exp of static session.
Default: 7rw Unsigned32 (0..7 | 255) .1.3.6.1.4.1.2011.5.25.38.1.17 |
hwBfdDynamicSessionTosExThe extended Tos-Exp of dynamic session.
Default: 7rw Unsigned32 (0..7 | 255) .1.3.6.1.4.1.2011.5.25.38.1.18 |
hwBfdObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.38.2 |
hwBfdIfConfTableThe interface configuration table of BFD.
The index of this table is hwBfdIfConfIndex. SEQUENCE OF HwBfdIfConfEntry .1.3.6.1.4.1.2011.5.25.38.2.1 |
hwBfdIfConfEntryThe interface configuration table of BFD.
The index of this entry is hwBfdIfConfIndex. HwBfdIfConfEntry .1.3.6.1.4.1.2011.5.25.38.2.1.1 |
hwBfdIfConfIndexIt is the configuration index of this interface.
This index is automatically allocated inside the system
and is not user-configurable. Integer32 .1.3.6.1.4.1.2011.5.25.38.2.1.1.1 |
hwBfdIfConfNameIt is the name of this Interface.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.38.2.1.1.2 |
hwBfdIfConfEnableThe flag whether the interface has enabled BFD.
Options:
1. disable(0) -Indicates that the interface has disabled BFD
2. enable(1) -Indicates that the interface has enabled BFDro Integer32 .1.3.6.1.4.1.2011.5.25.38.2.1.1.3 |
hwBfdIfConfDeletingThe flag that whether the interface is in deleting.
Options:
1. notDeleted(0) -the interface is not deleted
2. deleted(1) -the interface is deletedro Integer32 .1.3.6.1.4.1.2011.5.25.38.2.1.1.4 |
hwBfdIfConfAvailableThe flag that whether the interface is available.
Options:
1. notAvailable(0) -the interface is not available
2. available(1) -the interface is availablero Integer32 .1.3.6.1.4.1.2011.5.25.38.2.1.1.5 |
hwBfdIfConfSessCntThe number of sessions that has been bound to this interface.ro Integer32 .1.3.6.1.4.1.2011.5.25.38.2.1.1.6 |
hwBfdIfConfRowStatusUsed to manage the creation and deletion of conceptual rows.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.38.2.1.1.7 |
hwBfdSessionConfTableBFD Session Configuration Table. Use this table to get/configure BFD sessions.
The index of this table is hwBfdSessConfName. SEQUENCE OF HwBfdSessionConfEntry .1.3.6.1.4.1.2011.5.25.38.2.2 |
hwBfdSessionConfEntryBFD Session Configuration Table. Use this table to get/configure BFD sessions.
The index of this entry is hwBfdSessConfName. HwBfdSessionConfEntry .1.3.6.1.4.1.2011.5.25.38.2.2.1 |
hwBfdSessConfNameIt is the name of this configuration model. OCTET STRING .1.3.6.1.4.1.2011.5.25.38.2.2.1.1 |
hwBfdSessConfMIndexIt is the configuration index of this session.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.38.2.2.1.2 |
hwBfdSessConfLocalDiscrDefine the local discriminator of the BFD session.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.38.2.2.1.3 |
hwBfdSessConfRemoteDiscrDefine the remote discriminator of the BFD session.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.38.2.2.1.4 |
hwBfdSessConfPeerAddrDefine the IP address of the peer in the BFD session.rw IpAddress .1.3.6.1.4.1.2011.5.25.38.2.2.1.5 |
hwBfdSessConfBindIfIndexIt is the index of the binding interface in the BFD configuration.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.38.2.2.1.6 |
hwBfdSessConfBindIfNameIt is the name of the binding interface in the BFD configuration.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.38.2.2.1.7 |
hwBfdSessConfDemandEnableIt is the flag of the BFD demand mode.
Options:
1. disabled(0) -disable the BFD demand mode
2. enabled(1) -enable the BFD demand moderw Integer32 .1.3.6.1.4.1.2011.5.25.38.2.2.1.8 |
hwBfdSessConfDemandTimerIntervalDefine the detecting interval in the BFD session with the demand mode.
Unit: millisecondrw Unsigned32 (0 | 500..300000) .1.3.6.1.4.1.2011.5.25.38.2.2.1.9 |
hwBfdSessConfDetectMultIt is Detect time multiplier of the configuration. The
negotiated transmit interval, multiplied by this value,
provides the detection time for the transmitting
system in Asynchronous mode.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.38.2.2.1.10 |
hwBfdSessConfDesiredMinRxIntervalThis is the minimum interval of the configuration,in
milliseconds, between received BFD Control packets
that this system is capable of supporting.
Unit: millisecondrw BfdInterval .1.3.6.1.4.1.2011.5.25.38.2.2.1.11 |
hwBfdSessConfDesiredMinTxIntervalThis is the minimum interval of the configuration,
in milliseconds, that the local system would
like to use when transmitting BFD Control packets.
Unit: millisecondrw BfdInterval .1.3.6.1.4.1.2011.5.25.38.2.2.1.12 |
hwBfdSessConfWTRIntervalThe wait-to-restore (WTR) time of the BFD session.
The event that indicates the session changing into the Up
state is reported to the application program only after
the WTR times out.
Unit: minuterw Integer32 .1.3.6.1.4.1.2011.5.25.38.2.2.1.13 |
hwBfdSessConfTOSThis is the TOS value of bfd packet.rw Integer32 .1.3.6.1.4.1.2011.5.25.38.2.2.1.14 |
hwBfdSessConfPSTFlagThe PST flag of the BFD session configuration.
It indicates the status association between the current BFD
session and the interface bound to the session.
Options:
1. disabled(0) -indicates that the PST capability of the BFD session is disabled
2. enabled(1) -indicates that the PST capability of the BFD session is enabledrw Integer32 .1.3.6.1.4.1.2011.5.25.38.2.2.1.15 |
hwBfdSessConfCommitFlagIt is the commit flag of the configuration entry.
Options:
1. notCommit(0) -not commit
2. commit(1) -commitrw Integer32 .1.3.6.1.4.1.2011.5.25.38.2.2.1.16 |
hwBfdSessConfAdminStatusA BFD session can be administratively enabled or disabled.
The AdminStatus field indicates the BFD session status.
Options:
1. 0 -disable
2. 1 -enablerw Integer32 .1.3.6.1.4.1.2011.5.25.38.2.2.1.17 |
hwBfdSessConfRowStatusUsed to manage the creation and deletion of conceptual rows.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.38.2.2.1.18 |
hwBfdSessConfSourceAddrDefine the source IP address of the BFD session.rw IpAddress .1.3.6.1.4.1.2011.5.25.38.2.2.1.19 |
hwBfdSessConfVrfIndexThe index of the VPN interface.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.38.2.2.1.20 |
hwBfdSessConfVPNNameThe name of VPN interface.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.38.2.2.1.21 |
hwBfdSessConfDefaultIpBFD session use default multicast IP as the detect peer-ip
Options:
1. no(1) -do not use the default multicast IP
2. yes(2) -use the default multicast IPrw Enumeration .1.3.6.1.4.1.2011.5.25.38.2.2.1.22 |
hwBfdSessConfPISFlagThe state of BFD session is associated with the state of the binding interface
Options:
1. false(1) -do not associate with interface state
2. true(2) -associate with interface state
3. subif(3) -associate with interface and correlative sub interfacerw Enumeration .1.3.6.1.4.1.2011.5.25.38.2.2.1.23 |
hwBfdSessConfBindTypeThe binding type of the BFD session.
Options:
1. interfaceIp(1) -BFD for IP with peer-ip and interface
2. peerIp(2) -BFD for IP only with peer-ip
3. sourceIp(3) -BFD for IP with peer-ip and source-ip
4. ifAndSourceIp(4) -BFD for IP with peer-ip, interface and source-ip
5. fec(5) -BFD for FEC(NOT support now)
6. tunnelIf(6) -BFD for Tunnel interface(NOT support now)
7. ospf(7) -BFD for OSPF
8. isis(8) -BFD for ISIS
9. ldpLsp(9) -BFD for LDP-LSP
10. staticLsp(10) -BFD for static LSP
11. teLsp(11) -BFD for TE-LSP
12. teTunnel(12) -BFD for TE-Tunnel
13. pw(13) -BFD for PW
14. vsiPw(15) -BFD for VSI PW
15. ldpTunnel(21) -BFD for LDP-Tunnel
16. bgpTunnel(22) -BFD for BGP-Tunnelrw Enumeration .1.3.6.1.4.1.2011.5.25.38.2.2.1.24 |
hwBfdSessConfNextHopIt is the next hop of the BFD session.rw IpAddress .1.3.6.1.4.1.2011.5.25.38.2.2.1.25 |
hwBfdSessConfStaticLspNameIt is the static LSP name of the BFD session.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.38.2.2.1.26 |
hwBfdSessConfPWSecondaryFlagThe role of the PW bound with BFD session.
Options:
1. flagMasterPW(1) -master PW
2. flagSecondaryPW(2)-secondary PW
3. flagNoPW(3) -no PWrw Enumeration .1.3.6.1.4.1.2011.5.25.38.2.2.1.27 |
hwBfdSessConfTunnelDetectTypeSet the failure notifies policy type.
Options:
1. flagBothDown(1) -notify applications when detecting both Detect-Down and Neighbor-Down
2. flagNeighborDown(2) -notify applications only when detecting Neighbor-Downrw Enumeration .1.3.6.1.4.1.2011.5.25.38.2.2.1.28 |
hwBfdSessConfVcIdIt is the ID of VC.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.38.2.2.1.29 |
hwBfdSessConfVsiNameIt is the name of VSI.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.38.2.2.1.30 |
hwBfdSessConfVsiPeerAddrIt is the peer-ip of VSI.rw IpAddress .1.3.6.1.4.1.2011.5.25.38.2.2.1.31 |
hwBfdSessConfDiscrAutoDescribe whether the discriminator can be auto allocated.
Options:
1.enabled(1) -the discriminator can be allocated automatically
2.disabled(2) -the discriminator can not be allocated automaticallyrw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.38.2.2.1.32 |
hwBfdSessConfPeerIpv6AddrDefine the peer IPv6 address of the BFD session.rw Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2011.5.25.38.2.2.1.33 |
hwBfdSessConfSourceIpv6AddrDefine the source IPv6 address of the BFD session.rw Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2011.5.25.38.2.2.1.34 |
hwBfdSessConfIpv6NextHopIt is the next hop of the BFD session.ro Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2011.5.25.38.2.2.1.35 |
hwBfdSessConfIsIpv6AddrWhether the peer address of the BFD session is IPv6 address.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.38.2.2.1.36 |
hwBfdSessConfKeychainNameSpecify the name of the keychain for authentication.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.38.2.2.1.37 |
hwBfdSessConfMeticulousWhether enable meticulous authentication for MD5 or SHA-1 type.
Options:
1. enabled(1) -enable meticulous authentication for MD5 or SHA-1 type
2. disabled(2) -disabled meticulous authentication for MD5 or SHA-1 typerw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.38.2.2.1.38 |
hwBfdSessConfLooseAuthenticationWhether loose authentication check.
Options:
1.True(1) -loose-check
2.False(2) -do not loose-checkrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.38.2.2.1.39 |
hwBfdSessConfOneArmEchoThe value of this object identifies whether a session works in one-arm-echo mode.
Options:
1. enabled(1) -indicates that the session works in one-arm-echo mode
2. disabled(2) -indicates that the session does not work in one-arm-echo moderw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.38.2.2.1.40 |
hwBfdSessConfMinEchoRxIntervalThe value of this object identifies the minimum interval between received BFD
Control packets, in milliseconds.This value reflects the capability of receiving
BFD Control packets.
Unit: millisecondrw Unsigned32 (0|1..4294967295) .1.3.6.1.4.1.2011.5.25.38.2.2.1.41 |
hwBfdSessConfPWTtlModeThe value of this object identifies the configuration mode of a TTL used by
the BFD session for PW.
Options:
1. config(1) -indicates that the TTL is manually set
2. auto(2) -indicates that the TTL is automatically calculated based on an IP address
3. default(3)-indicates that the TTL is 255 by default
4. none(4) -indicates that the TTL is not in PW moderw Enumeration .1.3.6.1.4.1.2011.5.25.38.2.2.1.42 |
hwBfdSessConfPWTtlThe value of this object identifies the TTL used by the BFD session for PW.
The vlaue is configurable only when the configuration mode of a TTL is config.rw Integer32 .1.3.6.1.4.1.2011.5.25.38.2.2.1.43 |
hwBfdSessConfRemotePeerIpTypeThe value of this object identifies the type of the destination address of the BFD
session for PW.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.38.2.2.1.44 |
hwBfdSessConfRemotePeerIpThe value of this object identifies the destination IP address of the BFD session
for PW.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.38.2.2.1.45 |
hwBfdSessConfSelectBoardThis object indicates the main processing board of a BFD session.rw DisplayString .1.3.6.1.4.1.2011.5.25.38.2.2.1.46 |
hwBfdSessConfPWSPEThe value of this object identifies the node on which a BFD session is set up.
The values are as follows.
Options:
1. upe(1) -indicates that a BFD session is set up on a UPE to detect a PW
2. spe(2) -indicates that a BFD session is set up on an SPE to detect a PW
3. none(3) -indicates that a BFD session does not detect a PW
Default: nonerw Enumeration .1.3.6.1.4.1.2011.5.25.38.2.2.1.47 |
hwBfdSessConfPWTrackIfNameThis object indicates the interface monitored by the BFD session for PW.rw DisplayString .1.3.6.1.4.1.2011.5.25.38.2.2.1.48 |
hwBfdSessConfIsPWTrackIfThe value of this object identifies whether the BFD session for
PW monitors an interface. The values are as follows.
Options:
1. enabled(1) -enables the BFD session for PW to monitor the interface
2. disabled(2)-disables the BFD session for PW from monitoring the interfacerw EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.38.2.2.1.49 |
hwBfdSessConfEncapsulationTypeThe value of this object identifies the VC encapsulation type on an SPE.
The values are as follows:
fr
atm-aal5-sdu
atm-trans-cell
vlan
ethernet
hdlc
ppp
atm-nto1-vcc
atm-nto1-vpc
ip-layer2
atm-1to1-vcc
atm-1to1-vpc
atm-aal5-pdu
satop-e1
satop-t1
esopsn-basic
ip-interworkingrw DisplayString .1.3.6.1.4.1.2011.5.25.38.2.2.1.50 |
hwBfdSessConfPEVidThe value of this object identifies the outer tag of a sub-interface
for QinQ VLAN tag termination or the VLAN ID of a sub-interface for
dot1q VLAN tag termination.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.38.2.2.1.51 |
hwBfdSessConfCEVidThe value of this object identifies the inner tag in QinQ packets.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.38.2.2.1.52 |
hwBfdSessConfTOSExThis is the extended TOS value of bfd packet.rw Integer32 (0..7 | 255) .1.3.6.1.4.1.2011.5.25.38.2.2.1.53 |
hwBfdSessionTableThe BFD Session Table describes the BFD sessions.
The index of this table is hwBfdSessIndex. SEQUENCE OF HwBfdSessionEntry .1.3.6.1.4.1.2011.5.25.38.2.3 |
hwBfdSessionEntryThe BFD Session Table describes the BFD sessions.
The index of this entry is hwBfdSessIndex. HwBfdSessionEntry .1.3.6.1.4.1.2011.5.25.38.2.3.1 |
hwBfdSessIndexIt is unique and the Index of this session.
This index is automatically allocated inside the system
and is not user-configurable.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.38.2.3.1.1 |
hwBfdSessMIndexThis value indicate the configuration has Main Index.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.38.2.3.1.2 |
hwBfdSessBindVRRPDescribe the capability of bound with VRRP for the BFD session.
Options:
1. notBind(0) -not bind
2. bind(1) -bindro Integer32 .1.3.6.1.4.1.2011.5.25.38.2.3.1.3 |
hwBfdSessCfgNameThis indicate the name of the session which
will be display course information or statistic
information of the session.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.38.2.3.1.4 |
hwBfdSessPeerAddrDefine the peer IP address of the BFD session.ro IpAddress .1.3.6.1.4.1.2011.5.25.38.2.3.1.5 |
hwBfdSessBindIfIndexIt is the index of the binding interface in the BFD sessionro Integer32 .1.3.6.1.4.1.2011.5.25.38.2.3.1.6 |
hwBfdSessBindIfNameIt is the name of the binding interface in the BFD session.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.38.2.3.1.7 |
hwBfdSessLocalDiscrA unique, nonzero discriminator value generated by the
transmitting system, used to demultiplex multiple BFD
sessions between the same pair of system.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.38.2.3.1.8 |
hwBfdSessRemoteDiscrThe discriminator received from the corresponding remote
system. This field reflects back the received value of My
Discriminator, or is zero if that value is unknown.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.38.2.3.1.9 |
hwBfdSessOperModeDescribe the current operating mode configured with the BFD session.
Options:
1. 0 -asynchronous mode with echo function
2. 1 -asynchronous mode without echo function
3. 2 -demand mode with echo function
4. 3 -demand mode without echo function
5. 4 -asynchronous One-arm-echo modero Integer32 .1.3.6.1.4.1.2011.5.25.38.2.3.1.10 |
hwBfdSessDetectMultDetect time multiplier. The negotiated transmit interval,
multiplied by this value, provides the detection time for
the transmitting system in Asynchronous mode.
Default: 3ro Unsigned32 .1.3.6.1.4.1.2011.5.25.38.2.3.1.11 |
hwBfdSessDemandTimerIntervalIt is the detecting interval in the BFD session with the demand mode.
Unit: millisecondro BfdInterval .1.3.6.1.4.1.2011.5.25.38.2.3.1.12 |
hwBfdSessActualRxIntervalThis is the minimum interval, in milliseconds, between
received BFD Control packets that this system is capable
of supporting.
Unit: millisecondro BfdInterval .1.3.6.1.4.1.2011.5.25.38.2.3.1.13 |
hwBfdSessActualTxIntervalThis is the minimum interval, in milliseconds, that the
local system would like to use when transmitting BFD
Control packets.
Unit: millisecondro BfdInterval .1.3.6.1.4.1.2011.5.25.38.2.3.1.14 |
hwBfdSessWTRIntervalThe WTR interval of the BFD session.
Unit: minutero Integer32 .1.3.6.1.4.1.2011.5.25.38.2.3.1.15 |
hwBfdSessTOSThis is the TOS value of bfd packet.ro Integer32 .1.3.6.1.4.1.2011.5.25.38.2.3.1.16 |
hwBfdSessStateDescribe the current state of the BFD session.
Options:
1. 0 -admin down
2. 1 -down
3. 2 -init
4. 3 -upro Integer32 .1.3.6.1.4.1.2011.5.25.38.2.3.1.17 |
hwBfdSessDiagA diagnostic code specifying the local system's reason for
the last session state change.
Options:
1. 0 -no diagnostic
2. 1 -control detection time expired
3. 2 -echo function failed
4. 3 -neighbor signaled session down
5. 4 -forwarding plane reset
6. 5 -path down
7. 6 -concatenated path down
8. 7 -administratively down
9. 8 -reverse concatenated path down
10. 9 -neighbor signaled session down (receive admindown)
11. 10-31 -reserved for future usero Integer32 .1.3.6.1.4.1.2011.5.25.38.2.3.1.18 |
hwBfdSessSourceAddrThe source address of the session.ro IpAddress .1.3.6.1.4.1.2011.5.25.38.2.3.1.19 |
hwBfdSessVrfIndexThe index of the VPN interface.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.38.2.3.1.20 |
hwBfdSessVPNNameThe name of VPN interface.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.38.2.3.1.21 |
hwBfdSessTypeThe type of the BFD session.
Options:
1. static(1) -static
2. dynamic(2) -dynamic
3. entireDynamic(3) -entire dynamic
4. auto(4) -autoro Enumeration .1.3.6.1.4.1.2011.5.25.38.2.3.1.22 |
hwBfdSessBindAppTypeThe Application type that this BFD session has been bound to
Options:
1. noApplication(1) -No application
2. vrrp(2) -VRRP
3. ifnet(3) -IFNET
4. vrrpAndIfnet(4) -VRRP&IFNET
5. bgp(5) -BGP
6. ospf(6) -OSPF
7. bgpAndOspf(7) -BGP&OSPF
8. oamLspmL2vpn(8) -OAM&LSPM&L2VPN (for LDP LSP and static LSP)
9. oamTnlL2vpn(9) -OAM&TUNNEL&L2VPN (for TE_Tunnnel)
10. lspmL2vpnTnlps(10) -LSPM&TUNNEL_PS&L2VPN (for TE_LSP)
11. oamMplsfwL2vpn(11) -OAM&MPLSFW&L2VPN (for PW)
12. isis(12) -ISIS
13. vsiPw(13) -VSIPW (for VSI PW)
14. vrrpOamLspmL2vpn(14) -VRRP&OAM&LSPM&L2VPN
15. vrrpOamTnlL2vpn(15) -VRRP&OAM&TUNNEL&L2VPN
16. vrrpLspmL2vpnTnlps(16) -VRRP&LSPM&TUNNEL_PS&L2VPN
17. vrrpOamMplsfwL2vpn(17) -VRRP&OAM&MPLSFW&L2VPN
18. pim(18) -PIM
19. bgpIsis(19) -BGP&ISIS
20. bgpPim(20) -BGP&PIM
21. ospfIsis(21) -OSPF&ISIS
22. ospfPim(22) -OSPF&PIM
23. isisPim(23) -ISIS&PIM
24. bgpOspfIsis(24) -BGP&OSPF&ISIS
25. bgpOspfPim(25) -BGP&OSPF&PIM
26. bgpIsisPim(26) -BGP&ISIS&PIM
27. ospfIsisPim(27) -OSPF&ISIS&PIM
28. bgpOspfIsisPim(28) -BGPOSPF&ISIS&PIM
29. bgp6(29) -BGP6
30. ospfv3(30) -OSPFV3
31. isis6(31) -ISIS6
32. pim6(32) -PIM6
33. bgp6Ospfv3(33) -BGP6&OSPFV3
34. bgp6Isis6(34) -BGP6&ISIS6
35. bgp6Pim6(35) -BGP6&PIM6
36. ospfv3Isis6(36) -OSPFV3&ISIS6
37. ospfv3Pim6(37) -OSPFV3&PIM6
38. isis6Pim6(38) -ISIS6&PIM6
39. bgp6Ospfv3Isis6(39) -BGP6&OSPFV3&ISIS6
40. bgp6Ospfv3Pim6(40) -BGP6&OSPFV3&PIM6
41. bgp6Isis6Pim6(41) -BGP6&ISIS6&PIM6
42. ospfv3Isis6Pim6(42) -OSPFV3&ISIS6&PIM6
43. bgp6Ospfv3Isis6Pim6(43) -BGP6&OSPFV3&ISIS6&PIM6
44. auto(44) -AUTO
45. autoIsis(45) -AUTO&ISIS
46. autoOspf(46) -AUTO&OSPF
47. autoBgp(47) -AUTO&BGP
48. autoPim(48) -AUTO&PIM
49. autoIsisOspf(49) -AUTO&ISIS&OSPF
50. autoIsisBgp(50) -AUTO&ISIS&BGP
51. autoIsisPim(51) -AUTO&ISIS&PIM
52. autoOspfBgp(52) -AUTO&OSPF&BGP
53. autoOspfPim(53) -AUTO&OSPF&PIM
54. autoBgpPim(54) -AUTO&BGP&PIM
55. autoIsisOspfBgp(55) -AUTO&ISIS&OSPF&BGP
56. autoIsisOspfBgpPim(56) -AUTO&ISIS&OSPF&BGP&PIM
57. autoIsis6(57) -AUTO&ISIS6
58. autoOspfv3(58) -AUTO&OSPFV3
59. autoBgp6(59) -AUTO&BGP6
60. autoPim6(60) -AUTO&PIM6
61. autoIsis6Ospfv3(61) -AUTO&ISIS6&OSPFV3
62. autoIsis6Bgp6(62) -AUTO&ISIS6&BGP6
63. autoIsis6Pim6(63) -AUTO&ISIS6&PIM6
64. autoOspfv3Bgp6(64) -AUTO&OSPFV3&BGP6)
65. autoOspfv3Pim6(65) -AUTO&OSPFV3&PIM6)
66. autoBgp6Pim6(66) -AUTO&BGP6&PIM6
67. autoIsis6Ospfv3Bgp6(67) -AUTO&ISIS6&OSPFV3&BGP6
68. autoIsis6Ospfv3Bgp6Pim6(68) -AUTO&ISIS6&OSPFV3&BGP6&PIM6
69. etrunk(69) -ETRUNK
70. etrunkIfnet(70) -ETRUNK&IFNET
71. etrunkVrrp(71) -ETRUNK&VRRP
72. etrunkVrrpIfnet(72) -ETRUNK&VRRP&IFNET
73. etrunkOamLspmL2vpn(73) -ETRUNK&OAM&LSPM&L2VPN
74. etrunkOamTnlL2vpn(74) -ETRUNK&OAM&TNL&L2VPN
75. etrunkLspmL2vpnTnlps(75) -ETRUNK&LSPM&L2VPN&TNLPS
76. etrunkOamMplsfwL2vpn(76) -ETRUNK&OAM&MPLSFW&L2VPN
77. etrunkvsiPw(77) -ETRUNK&VSIPW
78. etrunkOamLspmL2vpnVrrp(78) -ETRUNK&OAM&LSPM&L2VPN&VRRP
79. etrunkOamTnlL2vpnVrrp(79) -ETRUNK&OAM&TNL&L2VPN&VRRP
80. etrunkLspmL2vpnTnlpsVrrp(80) -ETRUNK&LSMP&L2VPN&TNLPS&VRRP
81. etrunkOamMplsfwL2vpnVrrp(81) -ETRUNK&OAM&MPLSFW&L2VPN&VRRP
82. rip(82) -RIP
83. bgpRip(83) -BGP&RIP
84. ospfRip(84) -OSPF&RIP
85. isisRip(85) -ISIS&RIP
86. pimRip(86) -PIM&RIP
87. bgpOspfRip(87) -BGP&OSPF&RIP
88. bgpIsisRip(88) -BGP&ISIS&RIP
89. bgpPimRip(89) -BGP&PIM&RIP
90. ospfIsisRip(90) -OSPF&ISIS&RIP
91. ospfPimRip(91) -OSPF&PIM&RIP
92. isisPimRip(92) -ISIS&PIM&RIP
93. bgpOspfIsisRip(93) -BGP&OSPF&ISIS&RIP
94. bgpOspfPimRip(94) -BGP&OSPF&PIM&RIP
95. ospfIsisPimRip(95) -OSPF&ISIS&PIM&RIP
96. autoRip(96) -AUTO&RIP
97. autoBgpRip(97) -AUTO&BGP&RIP
98. autoOspfRip(98) -AUTO&OSPF&RIP
99. autoIsisRip(99) -AUTO&ISIS&RIP
100. autoPimRip(100) -AUTO&PIM&RIP
101. autoBgpOspfRip(101) -AUTO&BGP&OSPF&RIP
102. autoBgpIsisRip(102) -AUTO&BGP&ISIS&RIP
103. autoBgpPimRip(103) -AUTO&BGP&PIM&RIP
104. autoOspfIsisRip(104) -AUTO&OSPF&ISIS&RIP
105. autoOspfPimRip(105) -AUTO&OSPF&PIM&RIP
106. autoIsisPimRip(106) -AUTO&ISIS&PIM&RIP
107. autoBgpOspfIsisRip(107) -AUTO&BGP&OSPF&ISIS&RIP
108. autoBgpOspfPimRip(108) -AUTO&BGP&OSPF&PIM&RIP
109. autoOspfIsisPimRip(109) -AUTO&OSPF&ISIS&PIM&RIP
110. autoIsisOspfBgpPimVrrp(110) -AUTO&ISIS&OSPF&BGP&PIM&VRRP
111. autoIsisOspfPimVrrp(111) -AUTO&ISIS&OSPF&PIM&VRRP
112. autoIsisOspfBgpVrrp(112) -AUTO&ISIS&OSPF&BGP&VRRP
113. autoIsisBgpPimVrrp(113) -AUTO&ISIS&BGP&PIM&VRRP
114. autoOspfBgpPimVrrp(114) -AUTO&OSPF&BGP&PIM&VRRP
115. autoIsisOspfVrrp(115) -AUTO&ISIS&OSPF&VRRP
116. autoIsisBgpVrrp(116) -AUTO&ISIS&BGP&VRRP
117. autoOspfBgpVrrp(117) -AUTO&OSPF&BGP&VRRP
118. autoIsisPimVrrp(118) -AUTO&ISIS&PIM&VRRP
119. autoOspfPimVrrp(119) -AUTO&OSPF&PIM&VRRP
120. autoBgpPimVrrp(120) -AUTO&BGP&PIM&VRRP
121. autoIsisVrrp(121) -AUTO&ISIS&VRRP
122. autoOspfVrrp(122) -AUTO&OSPF&VRRP
123. autoBgpVrrp(123) -AUTO&BGP&VRRP
124. autoPimVrrp(124) -AUTO&PIM&VRRP
125. autoVrrp(125) -AUTO&VRRP
126. autoVrrpBgp6(126) -AUTO&VRRP&BGP6
127. autoOspfv3Isis6Pim6(127) -AUTO&OSPFV3&ISIS6&PIM6
128. autoOspfBgpPim(128) -AUTO&OSPF&BGP&PIM
129. autoIsisOspfPim(129) -AUTO&ISIS&OSPF&PIM
130. autoIsisPimBgp(130) -AUTO&ISIS&BGP&PIM
131. bgpOspfIsisPimRip(131) -BGP&OSPF&ISIS&PIM&RIP
132. autoBgpOspfIsisPimRip(132) -AUTO&BGP&OSPF&ISIS&PIM&RIP
133. bgpRsvp(133) -BGP&RSVP
134. ospfRsvp(134) -OSPF&RSVP
135. isisRsvp(135) -ISIS&RSVP
136. pimRsvp(136) -PIM&RSVP
137. ripRsvp(137) -RIP&RSVP
138. bgpOspfRsvp(138) -BGP&OSPF&RSVP
139. bgpIsisRsvp(139) -BGP&ISIS&RSVP
140. bgpPimRsvp(140) -BGP&PIM&RSVP
141. bgpRipRsvp(141) -BGP&RIP&RSVP
142. ospfIsisRsvp(142) -OSPF&ISIS&RSVP
143. ospfPimRsvp(143) -OSPF&PIM&RSVP
144. ospfRipRsvp(144) -OSPF&RIP&RSVP
145. isisPimRsvp(145) -ISIS&PIM&RSVP
146. isisRipRsvp(146) -ISIS&RIP&RSVP
147. pimRipRsvp(147) -PIM&RIP&RSVP
148. bgpOspfIsisRsvp(148) -BGP&OSPF&ISIS&RSVP
149. bgpOspfPimRsvp(149) -BGP&OSPF&PIM&RSVP
150. bgpOspfRipRsvp(150) -BGP&OSPF&RIP&RSVP
151. bgpIsisPimRsvp(151) -BGP&ISIS&PIM&RSVP
152. bgpIsisRipRsvp(152) -BGP&ISIS&RIP&RSVP
153. bgpPimRipRsvp(153) -BGP&PIM&RIP&RSVP
154. ospfIsisPimRsvp(154) -OSPF&ISIS&PIM&RSVP
155. ospfIsisRipRsvp(155) -OSPF&ISIS&RIP&RSVP
156. isisPimRipRsvp(156) -ISIS&PIM&RIP&RSVP
157. bgpOspfIsisPimRsvp(157) -BGP&OSPF&ISIS&PIM&RSVP
158. bgpOspfIsisRipRSvp(158) -BGP&OSPF&ISIS&RIP&RSVP
159. bgpOspfPimRipRsvp(159) -BGP&OSPF&PIM&RIP&RSVP
160. bgpIsisPimRipRsvp(160) -BGP&ISIS&PIM&RIP&RSVP
161. ospfIsisPimRipRsvp(161) -OSPF&ISIS&PIM&RIP&RSVP
162. bgpOspfIsisPimRipRsvp(162) -BGP&OSPF&ISIS&PIM&RIP&RSVP
163. autoRsvp(163) -AUTO&RSVP
164. autoBgpRsvp(164) -AUTO&BGP&RSVP
165. autoOspfRsvp(165) -AUTO&OSPF&RSVP
166. autoIsisRsvp(166) -AUTO&ISIS&RSVP
167. autoPimRsvp(167) -AUTO&PIM&RSVP
168. autoRipRsvp(168) -AUTO&RIP&RSVP
169. autoBgpOspfRsvp(169) -AUTO&BGP&OSPF&RSVP
170. autoBgpIsisRsvp(170) -AUTO&BGP&ISIS&RSVP
171. autoBgpPimRsvp(171) -AUTO&BGP&PIM&RSVP
172. autoBgpRipRsvp(172) -AUTO&BGP&RIP&RSVP
173. autoOspfIsisRsvp(173) -AUTO&OSPF&ISIS&RSVP
174. autoOspfPimRsvp(174) -AUTO&OSPF&PIM&RSVP
175. autoOspfRipRsvp(175) -AUTO&OSPF&RIP&RSVP
176. autoIsisPimRsvp(176) -AUTO&ISIS&PIM&RSVP
177. autoIsisRipRsvp(177) -AUTO&ISIS&RIP&RSVP
178. autoPimRipRsvp(178) -AUTO&PIM&RIP&RAVP
179. autoBgpOspfIsisRsvp(179) -AUTO&BGP&OSPF&ISIS&RSVP
180. autoBgpOspfPimRsvp(180) -AUTO&BGP&OSPF&PIM&RSVP
181. autoBgpOspfRipRsvp(181) -AUTO&BGP&OSPF&RIP&RSVP
182. autoOspfIsisPimRsvp(182) -AUTO&OSPF&ISIS&PIM&RSVP
183. autoOspfIsisRipRsvp(183) -AUTO&OSPF&ISIS&RIP&RSVP
184. autoIsisPimRipRsvp(184) -AUTO&ISIS&PIM&RIP&RSVP
185. autoBgpOspfIsisPimRsvp(185) -AUTO&BGP&OSPF&ISIS&PIM&RSVP
186. autoBgpOspfIsisRipRsvp(186) -AUTO&BGP&OSPF&ISIS&RIP&RSVP
187. autoOspfIsisPimRipRsvp(187) -AUTO&OSPF&ISIS&PIM&RIP&RSVP
188. rsvp(188) -RSVPro Enumeration .1.3.6.1.4.1.2011.5.25.38.2.3.1.23 |
hwBfdSessDefaultIpBFD session use default multicast IP as the detect peer-ip
Options:
1. no(1) -do not use the default multicast IP
2. yes(2) -use the default multicast IPro Enumeration .1.3.6.1.4.1.2011.5.25.38.2.3.1.24 |
hwBfdSessPISFlagThe state of BFD session is associated with the state of the binding interface
Options:
1. false(1) -do not associate with interface state
2. true(2) -ssociate with interface state
3. subif(3) -associate with interface and correlative sub interfacero Enumeration .1.3.6.1.4.1.2011.5.25.38.2.3.1.25 |
hwBfdSessBindTypeThe binding type of the BFD session.
Options:
1. interfaceIp(1) -BFD for IP with peer-ip and interface
2. peerIp(2) -BFD for IP only with peer-ip
3. sourceIp(3) -BFD for IP with peer-ip and source-ip
4. ifAndSourceIp(4) -BFD for IP with peer-ip, interface and source-ip
5. fec(5) -BFD for FEC(NOT support now)
6. tunnelIf(6) -BFD for Tunnel interface(NOT support now)
7. ospf(7) -BFD for OSPF
8. isis(8) -BFD for ISIS
9. ldpLsp(9) -BFD for LDP-LSP
10. staticLsp(10) -BFD for static LSP
11. teLsp(11) -BFD for TE-LSP
12. teTunnel(12) -BFD for TE-Tunnel
13. pw(13) -BFD for PW;
14. vsiPw(15) -BFD for VSI PW
15. ldpTunnel(21) -BFD for LDP-Tunnel
16. bgpTunnel(22) -BFD for BGP-Tunnelro Enumeration .1.3.6.1.4.1.2011.5.25.38.2.3.1.26 |
hwBfdSessNextHopIt is the next hop of the BFD session.ro IpAddress .1.3.6.1.4.1.2011.5.25.38.2.3.1.27 |
hwBfdSessStaticLspNameIt is the static LSP name of the BFD session.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.38.2.3.1.28 |
hwBfdSessLspIndexIt is the index of the static LSP or LDP LSP in BFD session, mapping the channel index in MPLS network.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.38.2.3.1.29 |
hwBfdSessPWSecondaryFlagThe role of the PW bound with BFD session.
Options:
1. flagMasterPW(1) -master PW
2. flagSecondaryPW(2) -secondary PW
3. flagNoPW(3) -no PW
Default: 1ro Enumeration .1.3.6.1.4.1.2011.5.25.38.2.3.1.30 |
hwBfdSessTunnelDetectTypeSet the failure notifies policy type.
Options:
1. flagBothDown(1) -notify applications when detecting both Detect-Down and Neighbor-Down
2. flagNeighborDown(2) -notify applications only when detecting Neighbor-Down
Default: 1ro Enumeration .1.3.6.1.4.1.2011.5.25.38.2.3.1.31 |
hwBfdSessVcIdIt is the ID of VC.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.38.2.3.1.32 |
hwBfdSessVsiNameIt is the name of VSI.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.38.2.3.1.33 |
hwBfdSessVsiPeerAddrIt is the peer-ip of VSI.ro IpAddress .1.3.6.1.4.1.2011.5.25.38.2.3.1.34 |
hwBfdSessDiscrAutoDescribe whether the discriminator can be auto allocated.
Options:
1. enabled(1) -the discriminator can be allocated automatically
2. disabled(2) -the discriminator can not be allocated automatically
Default: disabledro EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.38.2.3.1.35 |
hwBfdSessPeerIpv6AddrDefine the peer IPv6 address of the BFD session.ro Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2011.5.25.38.2.3.1.36 |
hwBfdSessSourceIpv6AddrDefine the source IPv6 address of the BFD session.ro Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2011.5.25.38.2.3.1.37 |
hwBfdSessIpv6NextHopIt is the next hop of the BFD session.ro Ipv6Address (IPV6-TC) .1.3.6.1.4.1.2011.5.25.38.2.3.1.38 |
hwBfdSessIsIPv6AddrWhether the peer address of the BFD session is IPv6 address.
Default: falsero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.38.2.3.1.39 |
hwBfdSessMeticulousWhether enable meticulous authentication for MD5 or SHA-1 type.
Options:
1. enabled(1) -enable meticulous authentication for MD5 or SHA-1 type
2. disabled(2) -disabled meticulous authentication for MD5 or SHA-1 type
Default: 2ro EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.38.2.3.1.40 |
hwBfdSessLooseAuthenticationWhether loose authentication check.
Options:
1. True(1) -loose-check
2. False(2) -do not loose-check
Default: falsero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.38.2.3.1.41 |
hwBfdSessAuthenticationStatusAuthentication status of the bfd session
Options:
1. 0 -authentication disable
2. 1 -interface board do not support bfd authentication
3. 2 -keychain does not exist
4. 3 -auth BFD session number exceed
5. 4 -authentication in operation normally
100. 100 -exception
Default: 0ro Integer32 .1.3.6.1.4.1.2011.5.25.38.2.3.1.42 |
hwBfdSessOneArmEchoThe value of this object identifies whether a session works in one-arm-echo mode.
Options:
1. enabled(1) -indicates that the session works in one-arm-echo mode
2. disabled(2) -indicates that the session does not work in one-arm-echo mode
Default: disabledro EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.38.2.3.1.43 |
hwBfdSessPWTtlModeThe value of this object identifies the configuration mode of a TTL used by
the BFD session for PW.
Options:
1. config(1) -indicates that the TTL is manually set
2. auto(2) -indicates that the TTL is automatically calculated based on an IP address
3. default(3) -indicates that the TTL is 255 by default
4. nottl(4) -indicates that the TTL is not in PW modero Enumeration .1.3.6.1.4.1.2011.5.25.38.2.3.1.44 |
hwBfdSessPWTtlThe value of this object identifies the TTL used by the BFD session for PW.ro Integer32 .1.3.6.1.4.1.2011.5.25.38.2.3.1.45 |
hwBfdSessRemotePeerIpTypeThe value of this object identifies the type of the destination address of the BFD
session for PW.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.38.2.3.1.46 |
hwBfdSessRemotePeerIpThe value of this object identifies the destination IP address of the BFD session
for PW.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.38.2.3.1.47 |
hwBfdSessSelectBoardThis object indicates the main processing board of a BFD session.ro DisplayString .1.3.6.1.4.1.2011.5.25.38.2.3.1.48 |
hwBfdSessPWSPEThe value of this object identifies the node on which a BFD session is set up.
The values are as follows.
Options:
1. upe(1) -indicates that a BFD session is set up on a UPE to detect a PW
2. spe(2) -indicates that a BFD session is set up on an SPE to detect a PW
3. none(3) -indicates that a BFD session does not detect a PW
Default: nonero Enumeration .1.3.6.1.4.1.2011.5.25.38.2.3.1.49 |
hwBfdSessPWTrackIfNameThis object indicates the interface monitored by the BFD session for PW.ro DisplayString .1.3.6.1.4.1.2011.5.25.38.2.3.1.50 |
hwBfdSessIsPWTrackIfThe value of this object identifies whether the BFD session for
PW monitors an interface. The values are as follows.
Options:
1. enabled(1) -enables the BFD session for PW to monitor the interface
2. disabled(2) -disables the BFD session for PW from monitoring the interfacero EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.38.2.3.1.51 |
hwBfdSessEncapsulationTypeThe value of this object identifies the VC encapsulation type on an SPE.
The values are as follows:
fr
atm-aal5-sdu
atm-trans-cell
vlan
ethernet
hdlc
ppp
atm-nto1-vcc
atm-nto1-vpc
ip-layer2
atm-1to1-vcc
atm-1to1-vpc
atm-aal5-pdu
satop-e1
satop-t1
esopsn-basic
ip-interworkingro DisplayString .1.3.6.1.4.1.2011.5.25.38.2.3.1.52 |
hwBfdSessPEVidThe value of this object identifies the outer tag of a sub-interface
for QinQ VLAN tag termination or the VLAN ID of a sub-interface for
dot1q VLAN tag termination.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.38.2.3.1.53 |
hwBfdSessCEVidThe value of this object identifies the inner tag in QinQ packets.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.38.2.3.1.54 |
hwBfdSessPeerInetAddrTypeThe value of this object identifies the type of the destination address of the BFD
session.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.38.2.3.1.55 |
hwBfdSessPeerInetAddrThe value of this object identifies the destination IP address of the BFD session.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.38.2.3.1.56 |
hwBfdSessInetNextHopTypeThe value of this object identifies the type of the next hop of the BFD
session.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.38.2.3.1.57 |
hwBfdSessInetNextHopThe value of this object identifies the next hop of the BFD session.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.5.25.38.2.3.1.58 |
hwBfdSessBindAppTypeMaskA value which indicates the set of applications that
this BFD session binds. Every bit indicates a application.
The corresponding bit and applications are as follows:
bit application
0 IFNET
1 Route-Management
2 OSPF
3 ISISL1
4 ISISL2
5 PIM
6 ISISL1L2
7 BGP
8 VRRP
9 LSPM
10 RSVP
11 LDP
12 TE
13 Product Private APP
14 L2VPN
15 OAM_MANAGER
16 VTE
17 VPW
18 MPLSFW
19 VGMP
20 LSPV
21 VSI_PW
22 ETHOAM
23 AUTO
24 E-TRUNK
25 OSPFv3
26 ISISL1_6
27 ISISL2_6
28 PIM6
29 ISISL1L2_6
30 BGP6
31 RM6
32 RBS
33 RIP
34 FRP
35 BGPLSPro OCTET STRING .1.3.6.1.4.1.2011.5.25.38.2.3.1.59 |
hwBfdSessDscpThis is the dscp value of bfd packet.
255 is invalid value.ro Integer32 (0..63 | 255) .1.3.6.1.4.1.2011.5.25.38.2.3.1.60 |
hwBfdSessionPerTableThis table specifies BFD Session performance counters.
The index of this table is hwBfdSessPerIndex. SEQUENCE OF HwBfdSessionPerEntry .1.3.6.1.4.1.2011.5.25.38.2.4 |
hwBfdSessionPerEntryThis table specifies BFD Session performance counters.
The index of this entry is hwBfdSessPerIndex. HwBfdSessionPerEntry .1.3.6.1.4.1.2011.5.25.38.2.4.1 |
hwBfdSessPerIndexThe index of BFD session statistics.
This index is automatically allocated inside the system
and is not user-configurable. Unsigned32 .1.3.6.1.4.1.2011.5.25.38.2.4.1.1 |
hwBfdSessPerfPktInThe statistical information of the received Octets in local
system in this session.The total received packet number.ro Counter32 .1.3.6.1.4.1.2011.5.25.38.2.4.1.2 |
hwBfdSessPerfPktInHCThe statistical information of the received Octets in local
system in this session.The high 4 bytes of total received
packet number.ro Counter32 .1.3.6.1.4.1.2011.5.25.38.2.4.1.3 |
hwBfdSessPerfPktOutThe statistical information of the send Packets in local
system in this session.ro Counter32 .1.3.6.1.4.1.2011.5.25.38.2.4.1.4 |
hwBfdSessPerfPktOutHCThe statistical information of the send Packets in local
system in this session.The high 4 bytes of total send
packet number.ro Counter32 .1.3.6.1.4.1.2011.5.25.38.2.4.1.5 |
hwBfdSessPerfBadInThe statistical information of the received Errors in local
system in this session.ro Counter32 .1.3.6.1.4.1.2011.5.25.38.2.4.1.6 |
hwBfdSessPerfBadInHCThe statistical information of the received Errors in local
system in this session.The high 4 bytes of total received wrong
packet number.ro Counter32 .1.3.6.1.4.1.2011.5.25.38.2.4.1.7 |
hwBfdSessPerfBadOutThe statistical information of the send Errors in local
system in this session.ro Counter32 .1.3.6.1.4.1.2011.5.25.38.2.4.1.8 |
hwBfdSessPerfBadOutHCThe statistical information of the send Errors in local
system in this session.The high 4 bytes of total send
wrong packet number.ro Counter32 .1.3.6.1.4.1.2011.5.25.38.2.4.1.9 |
hwBfdSessPerfLastSessDownTimeThe time of session last time down.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.38.2.4.1.10 |
hwBfdSessPerfSessDownCountThe total count of session down.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.38.2.4.1.11 |
hwBfdSessPerfSessShortBreakCountThe total count of session shortbreak.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.38.2.4.1.12 |
hwBfdSessionPerStartTimeThe time that session start detection.ro OCTET STRING .1.3.6.1.4.1.2011.5.25.38.2.4.1.13 |
hwBfdSlotTableThe Slot table of BFD.
BFD statistics on specify board of containing the following objects.
The index of this table is hwBfdSlotID. SEQUENCE OF HwBfdSlotEntry .1.3.6.1.4.1.2011.5.25.38.2.5 |
hwBfdSlotEntryThe Slot table of BFD.
BFD statistics on specify board of containing the following objects.
The index of this entry is hwBfdSlotID. HwBfdSlotEntry .1.3.6.1.4.1.2011.5.25.38.2.5.1 |
hwBfdSlotIDThe ID of slot. Unsigned32 .1.3.6.1.4.1.2011.5.25.38.2.5.1.1 |
hwBfdSlotReserveOneHopSessNumThe number of session reserving for one-hop session on the board.rw Unsigned32 .1.3.6.1.4.1.2011.5.25.38.2.5.1.2 |
hwBfdSlotOneHopSessNumThe number of session for one-hop session on the board.roobsolete Unsigned32 .1.3.6.1.4.1.2011.5.25.38.2.5.1.3 |
hwBfdSlotCurrentSessNumThe number of session on the board on current.ro Unsigned32 .1.3.6.1.4.1.2011.5.25.38.2.5.1.4 |
hwBfdSlotRowStatusUsed to manage the creation and deletion of conceptual rows.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.38.2.5.1.5 |
hwBfdTtlConfTableThe TTL configuration table.
The index of this table is hwBfdTtlConfAddr, hwBfdTtlConfMaskLen and hwBfdTtlConfType. SEQUENCE OF HwBfdTtlConfEntry .1.3.6.1.4.1.2011.5.25.38.2.6 |
hwBfdTtlConfEntryThe TTL configuration table.
The index of this entry is hwBfdTtlConfAddr, hwBfdTtlConfMaskLen and hwBfdTtlConfType. HwBfdTtlConfEntry .1.3.6.1.4.1.2011.5.25.38.2.6.1 |
hwBfdTtlConfAddrIP address. IpAddress .1.3.6.1.4.1.2011.5.25.38.2.6.1.1 |
hwBfdTtlConfMaskLenLength of IP address mask. Integer32 .1.3.6.1.4.1.2011.5.25.38.2.6.1.2 |
hwBfdTtlConfTypeType of BFD session.
Options:
1. singleHop(1) -single hop bfd session
2. multiHop(2) -multi hop bfd session Enumeration .1.3.6.1.4.1.2011.5.25.38.2.6.1.3 |
hwBfdTtlConfValueTTL value.rw Integer32 .1.3.6.1.4.1.2011.5.25.38.2.6.1.4 |
hwBfdTtlConfRowStatusThe status of this table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.38.2.6.1.50 |
hwBfdPassiveAuthTableThe authentication configuration table for entire dynamic bfd session on egress.
The index of this table is hwBfdPassiveAuthPeerAddr and hwBfdPassiveAuthProtocol. SEQUENCE OF HwBfdPassiveAuthEntry .1.3.6.1.4.1.2011.5.25.38.2.7 |
hwBfdPassiveAuthEntryThe authentication configuration table for entire dynamic bfd session on egress.
The index of this entry is hwBfdPassiveAuthPeerAddr and hwBfdPassiveAuthProtocol. HwBfdPassiveAuthEntry .1.3.6.1.4.1.2011.5.25.38.2.7.1 |
hwBfdPassiveAuthPeerAddrSpecify the Lsr-id IP address of the ingress.rw IpAddress .1.3.6.1.4.1.2011.5.25.38.2.7.1.1 |
hwBfdPassiveAuthProtocolSpecify the protocol on ingress.
Options:
1. te(1) -MPLS TE protocol
2. ldp(2) -MPLS LDP protocolrw Integer32 .1.3.6.1.4.1.2011.5.25.38.2.7.1.2 |
hwBfdPassiveAuthKeychainNameSpecify the name of the keychain for authentication of entire dynamic bfd session.rw OCTET STRING .1.3.6.1.4.1.2011.5.25.38.2.7.1.3 |
hwBfdPassiveAuthMeticulousWhether enable meticulous authentication for MD5 or SHA-1 type.
Options:
1. enabled(1) -enable meticulous authentication for MD5 or SHA-1 type
2. disabled(2) -disabled meticulous authentication for MD5 or SHA-1 type
Default: 2ro EnabledStatus (P-BRIDGE-MIB) .1.3.6.1.4.1.2011.5.25.38.2.7.1.4 |
hwBfdPassiveAuthLooseWhether loose authentication check.
Options:
1. True(1) -loose-check
2. False(2) -do not loose-check
Default: falsero TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.38.2.7.1.5 |
hwBfdPassiveAuthRowStatusThe status of this table entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.5.25.38.2.7.1.50 |
hwBfdNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.38.3 |
hwBfdSessDownThis trap occurred when the state of the BFD session
became down. The BFD session is characterized
by the objects in this node. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.38.3.1 |
hwBfdSessUpThis trap occurred when the state of the BFD session
became up. The BFD session is characterized
by the objects in this node. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.38.3.2 |
hwBfdSessReachLimitThere is the notify when the session number reach the global limit. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.38.3.3 |
hwBfdSessReachLimitBindIfThere is the notify when the session number reach the interface limit. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.38.3.4 |
hwBfdSessReachLimitResumeThere is the notify when the session number reach the global limit was cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.38.3.5 |
hwBfdSessReachLimitBindIfResumeThere is the notify when the session number reach the interface limit was cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.38.3.6 |
hwBfdConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.38.4 |
hwBfdCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.38.4.1 |
hwBfdGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.38.4.2 |
hwBfdTrapsVbOids OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.38.5 |
hwBfdSessVlanIDThe VLANID binding to BFD session.ro Integer32 .1.3.6.1.4.1.2011.5.25.38.5.1 |
hwBfdTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.38.6 |
hwBfdCommonTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.38.6.1 |
hwBfdAlarmTraps OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.38.6.2 |
hwBfdAlarmTrapsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.2011.5.25.38.6.2.0 |
hwBfdSessUpTrapThis notification is generated when the bfdSessState
object for one entry in bfdSessionTable is about to
enter the up(3) state from some other state. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.38.6.2.0.1 |
hwBfdSessDownTrapThis notification is generated when the bfdSessState
object for one entry in bfdSessionTable is about to
enter the down(1) or adminDown(0) states from some
other state. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.38.6.2.0.2 |
hwBfdv6SingleHopSessUpTrapThis notification is generated when the bfdSessState
object for one entry in bfdSessionTable is about to
enter the up(3) state from some other state. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.38.6.2.0.3 |
hwBfdv6SingleHopSessDownTrapThis notification is generated when the bfdSessState
object for one entry in bfdSessionTable is about to
enter the down(1) or adminDown(0) states from some
other state. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.38.6.2.0.4 |
hwBfdv6MultiHopSessUpTrapThis notification is generated when the bfdSessState
object for one entry in bfdSessionTable is about to
enter the up(3) state from some other state. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.38.6.2.0.5 |
hwBfdv6MultiHopSessDownTrapThis notification is generated when the bfdSessState
object for one entry in bfdSessionTable is about to
enter the down(1) or adminDown(0) states from some
other state. NOTIFICATION-TYPE .1.3.6.1.4.1.2011.5.25.38.6.2.0.6 |