HPICF-SAVI-MIB
AI MIB Summary
The HPICF-SAVI-MIB enables configuration and monitoring of DHCPv6 Snooping and Source Address Validation Integrity (SAVI) protocols on HP networking devices to track binding table states, session counts, and security violation events. It facilitates the enforcement of IPv6 address binding integrity by exposing SAVI-specific counters and state variables for detecting spoofed or unauthorized host connections.
This MIB Module is designed to support the configuration and monitoring of DHCPv6 Snooping protocol. This MIB module was based off the IETF draft of SAVI mib, which was designed to support configuration and monitoring of SAVI protocol by Changging An(acq@cernet.edu.cn) and Jiahai Yang(yang@cernet.edu.cu),
https://tools.ietf.org/html/draft-an-savi-mib-02.\u201d.
Main OID:
hpicfSaviMIB.hpSwitchExperimental.1
26
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
26 total| Object Name |
|---|
hpicfSaviMIBThis MIB Module is designed to support the configuration
and monitoring of DHCPv6 Snooping protocol. This MIB module
was based off the IETF draft of SAVI mib, which was designed
to support configuration and monitoring of SAVI protocol by
Changging An(acq@cernet.edu.cn) and Jiahai Yang(yang@cernet.edu.cu),
https://tools.ietf.org/html/draft-an-savi-mib-02.\u201d. MODULE-IDENTITY .hpSwitchExperimental.1 |
hpicfSaviObjects OBJECT IDENTIFIER .hpSwitchExperimental.1.1 |
hpicfSaviObjectsPortTableThe table containing hpicfSAVI parameters of each anchor. SEQUENCE OF HpicfSaviObjectsPortEntry .hpSwitchExperimental.1.1.1 |
hpicfSaviObjectsPortEntryAn entry containing hpicfSAVI running parameters of an anchor. HpicfSaviObjectsPortEntry .hpSwitchExperimental.1.1.1.1 |
hpicfSaviObjectsPortIPVersionThe IP version. InetVersion (INET-ADDRESS-MIB) .hpSwitchExperimental.1.1.1.1.1 |
hpicfSaviObjectsPortIfIndexThe index value that uniquely identifies the interface to
which this entry is applicable. The interface identified by
a particular value of this index is the same interface as
identified by the same value of the IF-MIB's ifIndex. InterfaceIndex (IF-MIB) .hpSwitchExperimental.1.1.1.1.2 |
hpicfSaviObjPortDhcpTrustAttrThe DHCP trust attribute of the port.
enable(1), the attribute is set.
disable(2), the attribute is not set.rw Enumeration .hpSwitchExperimental.1.1.1.1.3 |
hpicfSaviObjectsPortFilteringNumThe max filtering number of the Port.rw Unsigned32 .hpSwitchExperimental.1.1.1.1.4 |
hpicfSaviObjectsBindingTableThe table containing the state of binding
between source address and anchor. SEQUENCE OF HpicfSaviObjectsBindingEntry .hpSwitchExperimental.1.1.2 |
hpicfSaviObjectsBindingEntryAn entry containing the state of binding between source
address and anchor.
Entries are keyed on the source IP address type,
binding type, anchor, and source IP address. HpicfSaviObjectsBindingEntry .hpSwitchExperimental.1.1.2.1 |
hpicfSaviObjBindingIpAddrTypeIP address type of the binding source IP. InetAddressType (INET-ADDRESS-MIB) .hpSwitchExperimental.1.1.2.1.1 |
hpicfSaviObjectsBindingTypeIP address assignment methods. Enumeration .hpSwitchExperimental.1.1.2.1.2 |
hpicfSaviObjectsBindingIfIndexThe index value that uniquely identifies the interface to
which this entry is applicable. The interface identified by
a particular value of this index is the same interface as
identified by the same value of the IF-MIB's ifIndex. InterfaceIndex (IF-MIB) .hpSwitchExperimental.1.1.2.1.3 |
hpicfSaviObjectsBindingIpAddressThe binding source IP address. InetAddress ( SIZE (4|16) ) .hpSwitchExperimental.1.1.2.1.4 |
hpicfSaviObjectsBindingMacAddrThe binding source mac address.rw MacAddress (SNMPv2-TC) .hpSwitchExperimental.1.1.2.1.5 |
hpicfSaviObjectsBindingLifetimeThe remaining lifetime of the entry.
TimeInterval is defined in RFC 2579, it's a period of time,
measured in units of 0.01 seconds,
and the value is (0..2147483647).
If hpicfSaviObjectsBindingType=manual, a value of 2147483647
represents infinity.ro TimeInterval (SNMPv2-TC) .hpSwitchExperimental.1.1.2.1.6 |
hpicfSaviObjectsBindingRowStatusThe status of this row, by which new entries may be
created, or old entries deleted from this table.
An Entry can be created or deleted only when
hpicfSaviObjectsBindingType=manual. Row statuses
createAndWait(5), notReady(3) and notInService(2)
are not supported.rw RowStatus (SNMPv2-TC) .hpSwitchExperimental.1.1.2.1.7 |
hpicfSaviObjectsFilteringTableThe table containing the filtering entries. SEQUENCE OF HpicfSaviObjectsFilteringEntry .hpSwitchExperimental.1.1.3 |
hpicfSaviObjectsFilteringEntryAn entry containing the filtering parameters.
Entries are keyed on the source IP address type,
anchor, and source IP address. HpicfSaviObjectsFilteringEntry .hpSwitchExperimental.1.1.3.1 |
hpicfSaviObjFilteringIpAddrTypeIP address type of the filtering source IP. InetAddressType (INET-ADDRESS-MIB) .hpSwitchExperimental.1.1.3.1.1 |
hpicfSaviObjectsFilteringIfIndexThe index value that uniquely identifies the interface to
which this entry is applicable. The interface identified by
a particular value of this index is the same interface as
identified by the same value of the IF-MIB's ifIndex. InterfaceIndex (IF-MIB) .hpSwitchExperimental.1.1.3.1.2 |
hpicfSaviObjFilteringIpAddrThe filtering source IP address. InetAddress ( SIZE (4|16) ) .hpSwitchExperimental.1.1.3.1.3 |
hpicfSaviObjectsFilteringMacAddrThe filtering source mac address.ro MacAddress (SNMPv2-TC) .hpSwitchExperimental.1.1.3.1.4 |
hpicfSaviConformance OBJECT IDENTIFIER .hpSwitchExperimental.1.2 |
hpicfSaviCompliances OBJECT IDENTIFIER .hpSwitchExperimental.1.2.1 |
hpicfSaviGroups OBJECT IDENTIFIER .hpSwitchExperimental.1.2.2 |