HP-ICF-RIP
AI MIB Summary
The HP-ICF-RIP MIB module enables monitoring of Routing Information Protocol (RIP) routing tables, neighbor states, and update counters on HP proprietary network devices. It provides vendor-specific extensions to the standard RIP MIB for tracking protocol convergence metrics and interface-level routing statistics.
This MIB module contains HP proprietary extensions to the standard RIP MIB.
Main OID:
hpicfRip.1.3.6.1.4.1.25506.11.1.13
24
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
24 total| Object Name |
|---|
hpicfRipThis MIB module contains HP proprietary
extensions to the standard RIP MIB. MODULE-IDENTITY .1.3.6.1.4.1.25506.11.1.13 |
IMPORTSThis MIB module contains HP proprietary
extensions to the standard RIP MIB. Unknown .1.3.6.1.4.1.25506.11.1.13 |
hpicfRipObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25506.11.1.13.1 |
hpicfRipGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.25506.11.1.13.1.1 |
hpicfRipAdminStatusThe operational status of the RIP routing protocol.rw Enumeration .1.3.6.1.4.1.25506.11.1.13.1.1.1 |
hpicfRipDefaultMetricDefault metric value for routes redistributed to
RIP.rw INTEGER ( 1..15 ) .1.3.6.1.4.1.25506.11.1.13.1.1.2 |
hpicfRipAutoSummaryA flag indicating whether RIP should perform
border filtering on subnet routes when crossing
a network boundary. Interfaces that are configured
for RIPv1 or RIPv1-compatible mode must always
filter subnets at network boundaries. Interfaces
configured for RIPv2 mode will only filter subnets
if this flag is set to 'true'. Setting this to
'true' will result in all subnets within a
class-based network to be summarized using a single
route for the subnet number, which can decrease the
size of the routing tables. However, if any networks
are discontiguous, this flag should be set to 'false'
for proper routing.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.11.1.13.1.1.3 |
hpicfRipDistanceThe administrative distance to associate with
routes learned by RIP. Routes with lower distances
are preferred. By default, RIP routes have
an administrative distance of 120.rw Integer32 .1.3.6.1.4.1.25506.11.1.13.1.1.4 |
hpicfRipIfConfTableHP extensions to the rip2IfConfTable. SEQUENCE OF HpicfIfConfEntry .1.3.6.1.4.1.25506.11.1.13.1.2 |
hpicfRipIfConfEntryHP extensions for a single RIP interface. HpicfIfConfEntry .1.3.6.1.4.1.25506.11.1.13.1.2.1 |
hpicfRipIfConfDoPoisonFlag indicating if router should perform poison
reverse on this interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.11.1.13.1.2.1.1 |
hpicfRipIfConfCostRIP metric for this interface.rw Integer32 .1.3.6.1.4.1.25506.11.1.13.1.2.1.2 |
hpicfRipRedistTableTable for configuring route redistribution
into RIP. SEQUENCE OF HpicfRipRedistEntry .1.3.6.1.4.1.25506.11.1.13.1.3 |
hpicfRipRedistEntryAn entry in the table for configuring route
redistribution into RIP from a single source
protocol. Entries in this table are not
created dynamically. There will be a single
entry for each supported source protocol. HpicfRipRedistEntry .1.3.6.1.4.1.25506.11.1.13.1.3.1 |
hpicfRipRedistSrcProtoSource protocol to redistribute routes from. IANAipRouteProtocol (IANA-RTPROTO-MIB) .1.3.6.1.4.1.25506.11.1.13.1.3.1.1 |
hpicfRipRedistEnabledA flag indicating whether RIP should
redistribute routes from this source protocol.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.11.1.13.1.3.1.2 |
hpicfRipRedistRestrictTableA table of route prefixes for filtering out
routes that RIP should not redistribute. Any
route that is contained by a range in this table
(in other words, has a longer mask than that
specified by hpicfRipRedistRestrictMask and
where the route destination ANDed with the
hpicfRipRedistRestrictMask is equal to
hpicfRipRedistRestrictAddr) will not be
redistributed as an external route by RIP. SEQUENCE OF HpicfRipRedistRestrictEntry .1.3.6.1.4.1.25506.11.1.13.1.4 |
hpicfRipRedistRestrictEntryA single entry in the table. Any route,
regardless of source protocol which is
contained within the specified range will not
be redistributed into RIP. Entries in this
table are created dynamically using the
hpicfRipRedistRestrictStatus object. HpicfRipRedistRestrictEntry .1.3.6.1.4.1.25506.11.1.13.1.4.1 |
hpicfRipRedistRestrictAddrThe IP address of the range of route entries
to exclude from redistribution into RIP. IpAddress .1.3.6.1.4.1.25506.11.1.13.1.4.1.1 |
hpicfRipRedistRestrictMaskThe mask for the range of route entries to
exclude from redistribution into RIP. IpAddress .1.3.6.1.4.1.25506.11.1.13.1.4.1.2 |
hpicfRipRedistRestrictStatusThe status of this entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.11.1.13.1.4.1.3 |
hpicfRipConformance OBJECT IDENTIFIER .1.3.6.1.4.1.25506.11.1.13.2 |
hpicfRipGroups OBJECT IDENTIFIER .1.3.6.1.4.1.25506.11.1.13.2.1 |
hpicfRipCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.25506.11.1.13.2.2 |