HP-ICF-PROVIDER-BRIDGE
This MIB module contains the HP 'version' of the standard Provider Bridge MIB and the proprietary extensions to it.
Main OID:
hpicfProviderBridge.1.3.6.1.4.1.25506.11.1.40
15
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
15 total| Object Name |
|---|
hpicfProviderBridgeThis MIB module contains the HP 'version'
of the standard Provider Bridge MIB and
the proprietary extensions to it. MODULE-IDENTITY .1.3.6.1.4.1.25506.11.1.40 |
HP-ICF-OIDThis MIB module contains the HP 'version'
of the standard Provider Bridge MIB and
the proprietary extensions to it. Unknown .1.3.6.1.4.1.25506.11.1.40 |
hpicfProviderBridgeObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25506.11.1.40.1 |
hpicfProviderBridgeBase OBJECT IDENTIFIER .1.3.6.1.4.1.25506.11.1.40.1.1 |
hpicfProviderBridgeTypehpicfProviderBridgeType controls bridge mode configuration.
A device can function in one of the 4 modes defined above.
vlanBridge - provider bridge feature disabled mode,
all vlans are cvlans.
svlanBridge - provider bridge mode with only svlans.
providerEdgeBridge - provider bridge mode with cvlans and
svlans and mappings between them.
vlanSvlanBridge - provider bridge mode with independent
cvlans and svlans on the same device.
Changing from one mode to another will empty out the
current configuration information and reboot the device.rw Enumeration .1.3.6.1.4.1.25506.11.1.40.1.1.1 |
hpicfProviderBridgeEtherTypeDefines the 2-byte ethertype for provider tagged frames.
The default is 0x88a8.
Changing from one tag-type to another with a given
hpicfProviderBridgeType configuration will save current
configurations and reboot the device, the new tag-type
will take effect subsequently.rw INTEGER .1.3.6.1.4.1.25506.11.1.40.1.1.2 |
hpicfProviderBridgeVlanTypeTableHP proprietaty extension to dot1qVlanStaticTable
to classify a vlan as a cvlan or an svlan SEQUENCE OF HpicfProviderBridgeVlanTypeEntry .1.3.6.1.4.1.25506.11.1.40.1.1.3 |
hpicfProviderBridgeVlanTypeEntryAn entry for HP Specific extension table HpicfProviderBridgeVlanTypeEntry .1.3.6.1.4.1.25506.11.1.40.1.1.3.1 |
hpicfProviderBridgeVlanTypeIndicates the vlantype.rw Enumeration .1.3.6.1.4.1.25506.11.1.40.1.1.3.1.1 |
hpicfProviderBridgePortTableThis specifies the designated type of an externally
accessible port on a Provider Bridge. SEQUENCE OF HpicfProviderBridgePortEntry .1.3.6.1.4.1.25506.11.1.40.1.1.4 |
hpicfProviderBridgePortEntryAn entry that specifies the designated type of an
externally accessible port on a Provider Bridge. HpicfProviderBridgePortEntry .1.3.6.1.4.1.25506.11.1.40.1.1.4.1 |
hpicfProviderBridgePortTypeThe type of an externally accessible port on
a Provider Bridge.
A customer-edge port is a C-VLAN component Port
on a Provider Edge Bridge that is connected to
customer owned equipment and receives and transmits
frames for a single customer. Designating a port as a
Customer Edge Port implies Provider Edge Bridge
functionality and, specifically, the existence of a
C-VLAN component associated with that port. This
C-VLAN component is uniquely identified within the
Bridge by the port number of the associated Customer
Edge Port.
A customer-network port is an S-VLAN component Port
on a Provider Bridge or within a Provider Edge
Bridge that receives and transmits frame for a
single customer.
A provider-network port is an S-VLAN component Port
on a Provider Bridge that can transmit and
receive frames for multiple customers.rw Enumeration .1.3.6.1.4.1.25506.11.1.40.1.1.4.1.1 |
hpicfProviderBridgeConformance OBJECT IDENTIFIER .1.3.6.1.4.1.25506.11.1.40.2 |
hpicfProviderBridgeGroups OBJECT IDENTIFIER .1.3.6.1.4.1.25506.11.1.40.2.1 |
hpicfProviderBridgeCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.25506.11.1.40.2.2 |
More MIBs from Hangzhou H3C
Browse all Hangzhou H3CMIBs →HH3C-ENTITY-VENDORTYPE-OID-MIB
SNMP MIB module
1974 objects→
HH3C-PRODUCT-ID-MIB
SNMP MIB module
1720 objects→
HH3C-DOT11-APMT-MIB
The HH3C-DOT11-APMT-MIB module enables monitoring of H3C wireless access points (both Fat and Fit modes) and their associated Access Controllers via CAPWAP tunnels, specifically tracking real-time AP operational states, association statistics, and BSS radio metrics.
643 objects→
HH3C-ACL-MIB
The HH3C-ACL-MIB enables monitoring and configuration of Access Control List (ACL) entries, packet filtering rules, and associated hit counters on H3C network devices. It provides visibility into specific traffic matching statistics, rule hit counts, and policy enforcement status for ingress and egress filtering operations.
538 objects→
HH3C-CBQOS2-MIB
The HH3C-CBQOS2-MIB enables the configuration and real-time monitoring of Class-Based QoS policies on H3C network devices, specifically tracking classifier definitions, traffic matching rules, behavior actions (such as CAR, GTS, and WRED), and policy application status across interfaces, VLANs, and PVCs.
472 objects→
HH3C-WIPS-MIB
SNMP MIB module
454 objects→