HP-ICF-OSPFV3-MIB
The MIB module contains HP proprietary extensions to the OSPFV3-MIB module.
Main OID:
hpicfOspfv3MIB.1.3.6.1.4.1.25506.11.1.44
124
Objects
Active
Status
8
Dependencies
Imported Objects
Objects
124 total| Object Name |
|---|
hpicfOspfv3MIBThe MIB module contains HP proprietary
extensions to the OSPFV3-MIB module. MODULE-IDENTITY .1.3.6.1.4.1.25506.11.1.44 |
hpicfOspfv3Objects OBJECT IDENTIFIER .1.3.6.1.4.1.25506.11.1.44.1 |
hpicfOspfv3GeneralGroup OBJECT IDENTIFIER .1.3.6.1.4.1.25506.11.1.44.1.1 |
hpicfOspfv3DefaultImportMetricThe default metric used for advertising
external routes imported into OSPF by this
router.rw BigMetric (OSPF-MIB) .1.3.6.1.4.1.25506.11.1.44.1.1.1 |
hpicfOspfv3DefaultImportMetricTypeThe default metric type used for advertising
external routes imported into OSPF by this
router.rw Enumeration .1.3.6.1.4.1.25506.11.1.44.1.1.2 |
hpicfOspfv3IntraAreaDistanceThe default administrative distance to associate
with intra-area routes learned by OSPF. Routes
with lower distances are preferred. By default,
OSPF routes have an administrative distance of 110.
Note that the administrative distance settings
for OSPF do not affect the choice of routes
within OSPF. OSPF will still prefer intra-area
routes over inter-area or AS-external routes even
if hpicfOspfv3InterAreaDistance or
hpicfOspfv3ExternalDistance is lower than
hpicfOspfv3IntraAreaDistance. The appropriate
administrative distance value is applied to the
route that OSPF selects as its best route to a
destination and is used to decide whether OSPF's
route is preferred over a route from some other
source.rw Integer32 .1.3.6.1.4.1.25506.11.1.44.1.1.3 |
hpicfOspfv3InterAreaDistanceThe default administrative distance to associate
with inter-area routes learned by OSPF. Routes
with lower distances are preferred. By default,
OSPF routes have an administrative distance of 110.
Note that the administrative distance settings
for OSPF do not affect the choice of routes
within OSPF. OSPF will still prefer intra-area
routes over inter-area routes, even if
hpicfOspfv3InterAreaDistance is lower than
hpicfOspfv3IntraAreaDistance. It will also still
prefer inter-area routes over AS-external routes
even if hpicfOspfv3ExternalDistance is lower than
hpicfOspfv3InterAreaDistance. The appropriate
administrative distance value is applied to the
route that OSPF selects as its best route to a
destination and is used to decide whether OSPF's
route is preferred over a route from some other
source.rw Integer32 .1.3.6.1.4.1.25506.11.1.44.1.1.4 |
hpicfOspfv3ExternalDistanceThe default administrative distance to associate
with AS-external routes learned by OSPF. Routes
with lower distances are preferred. By default,
OSPF routes have an administrative distance of 110.
Note that the administrative distance settings
for OSPF do not affect the choice of routes
within OSPF. OSPF will still prefer intra-area
routes and inter-area routes over AS-external
routes even if hpicfOspfv3ExternalDistance is lower
than the hpicfOspfv3IntraAreaDistance or
hpicfOspfv3InterAreaDistance. The appropriate
administrative distance value is applied to the
route that OSPF selects as its best route to a
destination and is used to decide whether OSPF's
route is preferred over a route from some other
source.rw Integer32 .1.3.6.1.4.1.25506.11.1.44.1.1.5 |
hpicfOspfv3AsLsdbTableThe OSPFv3 Process's AS-Scope Link State Database
(LSDB). The LSDB contains the AS-Scope Link State
Advertisements from throughout the areas that the
device is attached to. SEQUENCE OF HpicfOspfv3AsLsdbEntry .1.3.6.1.4.1.25506.11.1.44.1.2 |
hpicfOspfv3AsLsdbEntryA single AS-Scope Link State Advertisement. HpicfOspfv3AsLsdbEntry .1.3.6.1.4.1.25506.11.1.44.1.2.1 |
hpicfOspfv3AsLsdbEFTFlagsA 32-bit integer Representing the E,F and T bit flagsro Bits .1.3.6.1.4.1.25506.11.1.44.1.2.1.1 |
hpicfOspfv3AsLsdbMetricThe cost associated with this route.ro Metric (OSPF-MIB) .1.3.6.1.4.1.25506.11.1.44.1.2.1.2 |
hpicfOspfv3AsLsdbPrefixLengthThe Prefix Length of the Address Prefix.ro Unsigned32 .1.3.6.1.4.1.25506.11.1.44.1.2.1.3 |
hpicfOspfv3AsLsdbPrefixOptionsThe Prefix Options associated with the Address Prefix.ro Unsigned32 .1.3.6.1.4.1.25506.11.1.44.1.2.1.4 |
hpicfOspfv3AsLsdbRefLsTypeIf non-zero value this refers to another LSA in
Link State Database further identified by the Reference
Link State ID fieldro Unsigned32 .1.3.6.1.4.1.25506.11.1.44.1.2.1.5 |
hpicfOspfv3AsLsdbAddrPrefixThe advertised 16-byte Address Prefix.ro InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.11.1.44.1.2.1.6 |
hpicfOspfv3AsLsdbFwdingAddressIf included, Data traffic for the advertised destination
will be forwarded to this address.ro InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.11.1.44.1.2.1.7 |
hpicfOspfv3AsLsdbExtRouteTagsThe 32-bit Router Tags for the advertised Route.ro Unsigned32 .1.3.6.1.4.1.25506.11.1.44.1.2.1.8 |
hpicfOspfv3AsLsdbRefLsIdThe 32-bit LSID of the referenced LSA entry.ro Unsigned32 .1.3.6.1.4.1.25506.11.1.44.1.2.1.9 |
hpicfOspfv3AreaLsdbTableThe OSPFv3 Process's Area-Scope LSDB.
The LSDB contains the Area-Scope Link State
Advertisements from throughout the area that the
device is attached to. SEQUENCE OF HpicfOspfv3AreaLsdbEntry .1.3.6.1.4.1.25506.11.1.44.1.3 |
hpicfOspfv3AreaLsdbEntryA single Area-Scope Link State Advertisement. HpicfOspfv3AreaLsdbEntry .1.3.6.1.4.1.25506.11.1.44.1.3.1 |
hpicfOspfv3AreaLsdbRtrCapBitsThis field is valid if the LSA is a Router LSA. It uniquely
identifies the router type of the router in the Area.ro Bits .1.3.6.1.4.1.25506.11.1.44.1.3.1.1 |
hpicfOspfv3AreaLsdbOptionsThe Options field enables OSPF routers to support
(or not support) optional capabilities, and to communicate
their capability level to other OSPF routers. This field is
valid if the LSA is a Router LSA or a Network LSA, or an
Inter-Area-Router LSA.ro Unsigned32 .1.3.6.1.4.1.25506.11.1.44.1.3.1.2 |
hpicfOspfv3AreaLsdbMetricThis field is valid if the LSA is a Router LSA, a
Inter-Area_prefix LSA or a NSSA LSA. This field indicates the
cost involved in using the interface or route.ro Metric (OSPF-MIB) .1.3.6.1.4.1.25506.11.1.44.1.3.1.3 |
hpicfOspfv3AreaLsdbPrefixLengthThe Prefix Length of the Address Prefix.ro Unsigned32 .1.3.6.1.4.1.25506.11.1.44.1.3.1.4 |
hpicfOspfv3AreaLsdbPrefixOptionsThe Prefix Options associated with the Address Prefix.ro Unsigned32 .1.3.6.1.4.1.25506.11.1.44.1.3.1.5 |
hpicfOspfv3AreaLsdbAddrPrefixThe advertised 16-byte Address Prefix.ro InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.11.1.44.1.3.1.6 |
hpicfOspfv3AreaLsdbDstRtrIdThe Router ID of the router being described by the LSA. This
field is valid if the LSA is a Inter-Area-Router LSA.ro Ospfv3RouterIdTC (OSPFV3-MIB) .1.3.6.1.4.1.25506.11.1.44.1.3.1.7 |
hpicfOspfv3AreaLsdbNumPrefixesThis field is valid if the LSA is a Inter-Area-Prefix LSAs
and indicates the number of prefixes in the LSA.ro Unsigned32 .1.3.6.1.4.1.25506.11.1.44.1.3.1.8 |
hpicfOspfv3AreaLsdbRefLsTypeThis field is valid if the LSA is a Inter-Area-Prefix LSA or a
NSSA LSA. If non-zero, an LSA with this LS type is to be
associated with this LSA.ro Unsigned32 .1.3.6.1.4.1.25506.11.1.44.1.3.1.9 |
hpicfOspfv3AreaLsdbRefLsIdThis field is valid if the LSA is a Inter-Area-Prefix LSA or a
NSSA LSA. This field is included only if the Reference LS Type
field is set and indentifies the LSA with this Link State ID.ro Unsigned32 .1.3.6.1.4.1.25506.11.1.44.1.3.1.10 |
hpicfOspfv3AreaLsdbRefAdvRtrIdThis field is valid if the LSA is a Inter-Area-Prefix LSA or a
NSSA LSA. This field is included only if the Reference LS Type
field is set and indentifies the LSA having this Router ID as
the advertising Router ID.ro Ospfv3RouterIdTC (OSPFV3-MIB) .1.3.6.1.4.1.25506.11.1.44.1.3.1.11 |
hpicfOspfv3AreaLsdbEFTFlagsThis field is valid if the LSA is a NSSA LSA. This field
represents the E,F and T bit flagsro Bits .1.3.6.1.4.1.25506.11.1.44.1.3.1.12 |
hpicfOspfv3AreaLsdbFwdingAddressThis field is valid if the LSA is a NSSA LSA. This field is
present only if the 'F' Bit is set in the EFT flags field
and if included, the data traffic for the advertised
destination will be forwarded to this address.ro InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.11.1.44.1.3.1.13 |
hpicfOspfv3AreaLsdbExtRouteTagsThis field is valid if the LSA is a NSSA LSA. This field is
present only if the 'T' Bit is set in the EFT flags field.
A 32-bit field which may be used to communicate additional
information between AS boundary routers.ro Unsigned32 .1.3.6.1.4.1.25506.11.1.44.1.3.1.14 |
hpicfOspfv3LinkLsdbTableThe OSPFv3 Process's Link-Scope LSDB for non-virtual
interfaces. The LSDB contains the Link-Scope Link
State Advertisements from the interfaces that the
device is attached to. SEQUENCE OF HpicfOspfv3LinkLsdbEntry .1.3.6.1.4.1.25506.11.1.44.1.4 |
hpicfOspfv3LinkLsdbEntryA single Link-Scope Link State Advertisement. HpicfOspfv3LinkLsdbEntry .1.3.6.1.4.1.25506.11.1.44.1.4.1 |
hpicfOspfv3LinkLsdbRtrPriorityThis field is the OSPF priority set for this routerro Unsigned32 .1.3.6.1.4.1.25506.11.1.44.1.4.1.1 |
hpicfOspfv3LinkLsdbOptionsThe Options field enables OSPF routers to support
(or not support) optional capabilities, and to communicate
their capability level to other OSPF routers.ro Unsigned32 .1.3.6.1.4.1.25506.11.1.44.1.4.1.2 |
hpicfOspfv3LinkLsdbLocalAddressThe advertising router's local link IPv6 addressro InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.11.1.44.1.4.1.3 |
hpicfOspfv3LinkLsdbNumPrefixesThe number of other links on the advertising routerro Unsigned32 .1.3.6.1.4.1.25506.11.1.44.1.4.1.4 |
hpicfOspfv3IfTableThe OSPFv3 Interface Table describes the
interfaces from the viewpoint of OSPFv3. SEQUENCE OF HpicfOspfv3IfEntry .1.3.6.1.4.1.25506.11.1.44.1.5 |
hpicfOspfv3IfEntryThe OSPFv3 Interface Entry describes one
interface from the viewpoint of OSPFv3.
The information in this table is persistent
and when written the entity SHOULD save the
change to non-volatile storage. HpicfOspfv3IfEntry .1.3.6.1.4.1.25506.11.1.44.1.5.1 |
hpicfOspfv3IfPassiveThe passive state configuration of the OSPF interface.
In the passive mode no OSPF protocol messages are exchanged on
this interface.
true (1) - The interface is configured to work in Passive mode
false (2) - The interface is configured to work in normal mode.
This is the default configuration.
Changing the value will cause OSPF to reset on this interface and
make necessary adjustments to the link state database.
All other operations are not defined and will not affect the state of
the protocol.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.11.1.44.1.5.1.1 |
hpicfOspfv3IfNbrCountThis object specifies the number of OSPFv3 neighbors
present in this interface. This counter should be
incremented when a new neighbor is added in the network in
which this interface is present.
It should be decremented when a neighbor is disconnected.ro Unsigned32 .1.3.6.1.4.1.25506.11.1.44.1.5.1.2 |
hpicfOspfv3NbrTableA table describing all neighbors in the
locality of the OSPFv3 router. SEQUENCE OF HpicfOspfv3NbrEntry .1.3.6.1.4.1.25506.11.1.44.1.6 |
hpicfOspfv3NbrEntryThe information regarding a single neighbor. HpicfOspfv3NbrEntry .1.3.6.1.4.1.25506.11.1.44.1.6.1 |
hpicfOspfv3NbrUpTimeThis object specifies the time duration in
seconds for which the adjacency with a
particular neighbor is active.
This should be a monotonically increasing timer
for the duration till the adjacency is active.
This counter should be reset at losing
and re-establishing an adjacencyro Unsigned32 .1.3.6.1.4.1.25506.11.1.44.1.6.1.1 |
hpicfOspfv3NbrTimeToExpiryThis object specifies the time remaining for the
dead timer for the particular neighbor to expire.
This counter thus specifies the time in seconds
left for an adjacency to be brought down in case
no Hello packet is received during that interval.ro Unsigned32 .1.3.6.1.4.1.25506.11.1.44.1.6.1.2 |
hpicfOspfv3IfStatsTableTable that contains OSPFv3 Interface traffic specific
information. SEQUENCE OF HpicfOspfv3IfStatsEntry .1.3.6.1.4.1.25506.11.1.44.1.7 |
hpicfOspfv3IfStatsEntryA list of statistics counters maintained for an OSPFv3
interface. HpicfOspfv3IfStatsEntry .1.3.6.1.4.1.25506.11.1.44.1.7.1 |
hpicfOspfv3IfSentHelloPktThe number of OSPFv3 Hello packets sent on the
interface. This number is incremented each time
an OSPFv3 Hello packet is sent out of an
OSPFv3 enabled interface.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system. The counters can be cleared for any
interface using 'clear ipv6 ospf3 statistics'
commandro Counter32 .1.3.6.1.4.1.25506.11.1.44.1.7.1.1 |
hpicfOspfv3IfSentDDPktThe number of Database Description packets sent on
the interface. This number is incremented each
time an OSPFv3 DD packet is sent out of an OSPFv3
enabled interface.
Discontinuities in the value of this counter
can occur at re-initialization of the management
system. The counters can be cleared for any
interface using 'clear ipv6 ospf3 statistics'
commandro Counter32 .1.3.6.1.4.1.25506.11.1.44.1.7.1.2 |
hpicfOspfv3IfSentLSRPktThe number of Link State Request packets sent on
the interface. This number is incremented each
time OSPFv3 LSR packet is sent out of an OSPFv3
enabled interface.
Discontinuities in the value of this counter
can occur at re-initialization of the management
system. The counters can be cleared for any
interface using 'clear ipv6 ospf3 statistics'
commandro Counter32 .1.3.6.1.4.1.25506.11.1.44.1.7.1.3 |
hpicfOspfv3IfSentLSUPktThe number of Link State Update packets sent on
the interface. This number is incremented each
time OSPFv3 LSU packet is sent out of an OSPFv3
enabled interface.
Discontinuities in the value of this counter
can occur at re-initialization of the management
system. The counters can be cleared for any
interface using 'clear ipv6 ospf3 statistics'
commandro Counter32 .1.3.6.1.4.1.25506.11.1.44.1.7.1.4 |
hpicfOspfv3IfSentLSAPktThe number of Link State Acknowledgement packet
sent on the interface. This number is
incremented each time OSPFv3 LSA packet is sent
out of an OSPFv3 enabled interface.
Discontinuities in the value of this counter
can occur at re-initialization of the management
system. The counters can be cleared for any
interface using 'clear ipv6 ospf3 statistics'
commandro Counter32 .1.3.6.1.4.1.25506.11.1.44.1.7.1.5 |
hpicfOspfv3IfRcvdHelloPktThe number of Hello packets received on the
interface. This number is incremented each time
a hello packet is received on OSPFv3 enabled
interface.
Discontinuities in the value of this counter
can occur at re-initialization of the management
system. The counters can be cleared for any
interface using 'clear ipv6 ospf3 statistics'
commandro Counter32 .1.3.6.1.4.1.25506.11.1.44.1.7.1.6 |
hpicfOspfv3IfRcvdDDPktThe number of Database Description packets
received on the interface. This number is
incremented each time a OSPFv3 DD packet is
received on OSPFv3 enabled interface.
Discontinuities in the value of this counter
can occur at re-initialization of the management
system. The counters can be cleared for any
interface using 'clear ipv6 ospf3 statistics'
commandro Counter32 .1.3.6.1.4.1.25506.11.1.44.1.7.1.7 |
hpicfOspfv3IfRcvdLSRPktThe number of Link State Request packets received
on the interface. This number is incremented each
time a OSPFv3 LSR packet is received on OSPFv3
enabled interface.
Discontinuities in the value of this counter
can occur at re-initialization of the management
system. The counters can be cleared for any
interface using 'clear ipv6 ospf3 statistics'
commandro Counter32 .1.3.6.1.4.1.25506.11.1.44.1.7.1.8 |
hpicfOspfv3IfRcvdLSUPktThe number of Link State Update packets received
on the interface. This number is incremented each
time an OSPFv3 LSU packet is received on OSPFv3
enabled interface.
Discontinuities in the value of this counter
can occur at re-initialization of the management
system. The counters can be cleared for any
interface using 'clear ipv6 ospf3 statistics'
commandro Counter32 .1.3.6.1.4.1.25506.11.1.44.1.7.1.9 |
hpicfOspfv3IfRcvdLSAPktThe number of Link State Acknowledgement packets
received on the interface.
This number is incremented each
time a OSPF LSA packet is received on OSPFv3
enabled interface.
Discontinuities in the value of this counter
can occur at re-initialization of the management
system. The counters can be cleared for any
interface using 'clear ipv6 ospf3 statistics'
commandro Counter32 .1.3.6.1.4.1.25506.11.1.44.1.7.1.10 |
hpicfOspfv3IfErrorTableTable that contains OSPFv3 Interface traffic specific
error information. SEQUENCE OF HpicfOspfv3IfErrorEntry .1.3.6.1.4.1.25506.11.1.44.1.8 |
hpicfOspfv3IfErrorEntryA list of error counters maintained for an OSPFv3
interface. HpicfOspfv3IfErrorEntry .1.3.6.1.4.1.25506.11.1.44.1.8.1 |
hpicfOspfv3IfErrorTypeThis refers to the type of errors in the OSPFv3
packet received on an OSPFv3 enabled interface. Integer32 (1..'FFFF'h) .1.3.6.1.4.1.25506.11.1.44.1.8.1.1 |
hpicfOspfv3IfErrorCountThis refers to the number of erroneous packets
received on an OSPFv3 interface for each error
type.
Discontinuities in the value of this counter
can occur at re-initialization of the management
system. The counters can be cleared for any
interface using 'clear ipv6 ospf3 statistics'
command.ro Counter32 .1.3.6.1.4.1.25506.11.1.44.1.8.1.2 |
hpicfOspfv3IfClearStatsTableA list used to clear statistics information
maintained for an OSPFv3 interface. SEQUENCE OF HpicfOspfv3IfClearStatsEntry .1.3.6.1.4.1.25506.11.1.44.1.9 |
hpicfOspfv3IfClearStatsEntryA list used to clear statistics information
maintained for an OSPFv3 interface. HpicfOspfv3IfClearStatsEntry .1.3.6.1.4.1.25506.11.1.44.1.9.1 |
hpicfOspfv3ClearCountersWhen this variable is set
to true for a given vlan interface, correspondiing
interface counters will be cleared. Read of this will always be false.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.11.1.44.1.9.1.1 |
hpicfOspfv3SpfTableTable that contains OSPFv3 SPF execution details. SEQUENCE OF HpicfOspfv3SpfEntry .1.3.6.1.4.1.25506.11.1.44.1.10 |
hpicfOspfv3SpfEntryA list of OSPFv3 SPF algorithm execution details. HpicfOspfv3SpfEntry .1.3.6.1.4.1.25506.11.1.44.1.10.1 |
hpicfOspfv3SpfIndexThe index in spf table. This can range from 1 to 100
as only last hundred SPF run's reasons will be saved. Unsigned32 .1.3.6.1.4.1.25506.11.1.44.1.10.1.1 |
hpicfOspfv3SpfReasonThe hpicfOspfv3SpfReason refers to the reasons for
scheduling an SPF run. The Reasons could be OSPFv3
initialization, adding/deleting interface or link state
update received.ro Unsigned32 .1.3.6.1.4.1.25506.11.1.44.1.10.1.2 |
hpicfOspfv3LogTableA table containing the configuration parameters
for OSPFv3 event logging. SEQUENCE OF HpicfOspfv3LogEntry .1.3.6.1.4.1.25506.11.1.44.1.11 |
hpicfOspfv3LogEntryThe configuration parameters for OSPFv3
event log entry. HpicfOspfv3LogEntry .1.3.6.1.4.1.25506.11.1.44.1.11.1 |
hpicfOspfv3LogTypeThe type of the event log in OSPFv3
routing protocol . HpicfOspfLogType (HP-ICF-OSPF) .1.3.6.1.4.1.25506.11.1.44.1.11.1.1 |
hpicfOspfv3LogActionThe mode of OSPFv3 event logging. If the
OSPFv3 log type is set to
neighborAdjacencyChanges, then meaninng of
this field is as follows:
if enabled, it logs only the adjacency
state transitions to final states.
if enabledWithDetail option, it logs all
the state transitions and other events and
error conditions related to adjacency.
if disabled, none of the adjacency related
events are logged.rw HpicfOspfLogAction (HP-ICF-OSPF) .1.3.6.1.4.1.25506.11.1.44.1.11.1.2 |
hpicfOspfv3RouterLSATableThis table having Area scope is a dependent-expansion table
for the Router LSA entry in the Area LSDB table. It
represents the list of per interface details advertised
in a Router LSA. SEQUENCE OF HpicfOspfv3RouterLSAEntry .1.3.6.1.4.1.25506.11.1.44.1.12 |
hpicfOspfv3RouterLSAEntryA single Area-Scope Link State Advertisement. HpicfOspfv3RouterLSAEntry .1.3.6.1.4.1.25506.11.1.44.1.12.1 |
hpicfOspfv3RouterLSANbrIfIdThe Interface Id of the neighbor's router that
originating router in the Autonomous System. Unsigned32 .1.3.6.1.4.1.25506.11.1.44.1.12.1.1 |
hpicfOspfv3RouterLSANbrRtrIdThe router id of the router which is connected over
the interface Id. Ospfv3RouterIdTC (OSPFV3-MIB) .1.3.6.1.4.1.25506.11.1.44.1.12.1.2 |
hpicfOspfv3RouterLSAIfTypeThe 32-bit identifier of the Area from which the
LSA was received.ro Unsigned32 .1.3.6.1.4.1.25506.11.1.44.1.12.1.3 |
hpicfOspfv3RouterLSAMetricThe interface Id of the router that connectes
to the other router.ro Unsigned32(0..'FFFFFFFF'h) .1.3.6.1.4.1.25506.11.1.44.1.12.1.4 |
hpicfOspfv3RouterLSAIfIdThe interface Id of the router that connectes
to the other router.ro Unsigned32(0..'FFFFFFFF'h) .1.3.6.1.4.1.25506.11.1.44.1.12.1.5 |
hpicfOspfv3NetworkLSATableThis table having Area scope is a dependent-expansion table
for the Network LSA entry in the Area LSDB table. This table
represents the list of routers advertised in a Network LSA. SEQUENCE OF HpicfOspfv3NetworkLSAEntry .1.3.6.1.4.1.25506.11.1.44.1.13 |
hpicfOspfv3NetworkLSAEntryA single Area-Scope Link State Advertisement. HpicfOspfv3NetworkLSAEntry .1.3.6.1.4.1.25506.11.1.44.1.13.1 |
hpicfOspfv3NetworkLSASeqNumThe 32-bit sequence number identifying the attached router-ids. Unsigned32 .1.3.6.1.4.1.25506.11.1.44.1.13.1.1 |
hpicfOspfv3NetworkLSAAttachedRouterThe 32-bit Router identifier of the attached Router.ro Ospfv3RouterIdTC (OSPFV3-MIB) .1.3.6.1.4.1.25506.11.1.44.1.13.1.2 |
hpicfOspfv3IntraAPLSATableThis table having Area scope is a dependent-expansion table
for the Intra-Area-Prefix LSA entry in the Area LSDB table. This
table represents the list of Address Prefixes advertised in a
Intra-Area-Prefix LSA by the Designated Router in that Area. SEQUENCE OF HpicfOspfv3IntraAPLSAEntry .1.3.6.1.4.1.25506.11.1.44.1.14 |
hpicfOspfv3IntraAPLSAEntryA single Area-Scope Link State Advertisement. HpicfOspfv3IntraAPLSAEntry .1.3.6.1.4.1.25506.11.1.44.1.14.1 |
hpicfOspfv3IntraAPAddrPrefixThe advertised 16-byte Address Prefix. InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.11.1.44.1.14.1.1 |
hpicfOspfv3IntraAPPrefixLengthThe Prefix Length of the Address Prefix. Unsigned32 .1.3.6.1.4.1.25506.11.1.44.1.14.1.2 |
hpicfOspfv3IntraAPPrefixOptionsThe Prefix Options associated with the Address Prefix.ro Unsigned32 .1.3.6.1.4.1.25506.11.1.44.1.14.1.3 |
hpicfOspfv3IntraAPMetricThe Cost associated with the Address Prefix.ro Metric (OSPF-MIB) .1.3.6.1.4.1.25506.11.1.44.1.14.1.4 |
hpicfOspfv3LinkLSATableThe OSPFv3 Link LSA having Link scope.
The Link expanstion table contains the local
address prefix fields of all the links on the
originating router SEQUENCE OF HpicfOspfv3LinkLSAEntry .1.3.6.1.4.1.25506.11.1.44.1.15 |
hpicfOspfv3LinkLSAEntryA single Link-Scope Link State Advertisement. HpicfOspfv3LinkLSAEntry .1.3.6.1.4.1.25506.11.1.44.1.15.1 |
hpicfOspfv3LinkAddrPrefixThe Address prefix of all the links that has OSPFv3
configured in the originating router. InetAddressIPv6 (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.11.1.44.1.15.1.1 |
hpicfOspfv3LinkPrefixLengthThe Prefix Length of the Address Prefix. Unsigned32 .1.3.6.1.4.1.25506.11.1.44.1.15.1.2 |
hpicfOspfv3LinkPrefixOptionsThe Prefix Options associated with the Address Prefix.ro Unsigned32(0..'FFFFFFFF'h) .1.3.6.1.4.1.25506.11.1.44.1.15.1.3 |
hpicfOspfv3Trap OBJECT IDENTIFIER .1.3.6.1.4.1.25506.11.1.44.1.16 |
hpicfOspfv3Traps OBJECT IDENTIFIER .1.3.6.1.4.1.25506.11.1.44.1.16.0 |
hpicfOspfv3IfStateChangeAn hpicfOspfv3IfStateChange notification signifies
that there has been a change in the state of a non-virtual
OSPFv3 interface. This trap should be generated
when the interface state regresses (e.g., goes
from Dr to Down) or progresses to a terminal
state (i.e., Point-to-Point, DR Other, Dr, or
Backup). NOTIFICATION-TYPE .1.3.6.1.4.1.25506.11.1.44.1.16.0.1 |
hpicfOspfv3VirtIfStateChangeAn hpicfOspfv3VirtIfStateChange notification signifies that there
has been a change in the state of an OSPFv3 virtual
interface.
This notification should be generated when the
inter-face state regresses (e.g., goes from Point-
to-Point to Down) or progresses to a terminal
state (i.e., Point-to-Point). NOTIFICATION-TYPE .1.3.6.1.4.1.25506.11.1.44.1.16.0.2 |
hpicfOspfv3NbrStateChangeAn hpicfOspfv3NbrStateChange trap signifies that
there has been a change in the state of a non-
virtual OSPFv3 neighbor. This trap should be
generated when the neighbor state regresses
(e.g., goes from Attempt or Full to 1-Way or
Down) or progresses to a terminal state (e.g.,
2-Way or Full). When an neighbor transitions
from or to Full on non-broadcast multi-access
and broadcast networks, the trap should be gen-
erated by the designated router. A designated
router transitioning to Down will be noted by
hpicfOspfv3IfStateChange. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.11.1.44.1.16.0.3 |
hpicfOspfv3VirtNbrStateChangeAn hpicfOspfv3VirtNbrStateChange trap signifies that
there has been a change in the state of an
OSPFv3 virtual neighbor. This trap should
be generated when the neighbor state regresses
(e.g., goes from Attempt or Full to 1-Way or Down)
or progresses to a terminal state (e.g., Full). NOTIFICATION-TYPE .1.3.6.1.4.1.25506.11.1.44.1.16.0.4 |
hpicfOspfv3IfConfigErrorAn hpicfOspfv3IfConfigError trap signifies that a
packet has been received on a non-virtual in-
terface from a router whose configuration
parameters conflict with this router's confi-
guration parameters. Note that the event op-
tionMismatch should cause a trap only if it
prevents an adjacency from forming. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.11.1.44.1.16.0.5 |
hpicfOspfv3VirtIfConfigErrorAn hpicfOspfv3VirtIfConfigError trap signifies that a
packet has been received on a virtual interface
from a router whose configuration parameters
conflict with this router's configuration
parameters. Note that the event optionMismatch
should cause a trap only if it prevents an ad-
jacency from forming. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.11.1.44.1.16.0.6 |
hpicfOspfv3IfRxBadPacketAn hpicfOspfv3IfRxBadPacket trap signifies that an
OSPFv3 packet that cannot be parsed has been received
on a non-virtual interface. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.11.1.44.1.16.0.7 |
hpicfOspfv3VirtIfRxBadPacketAn hpicfOspfv3VirtIfRxBadPacket trap signifies that an
OSPFv3 packet that cannot be parsed has been received
on a non-virtual interface. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.11.1.44.1.16.0.8 |
hpicfOspfv3TxRetransmitAn hpicfOspfv3TxRetransmit trap signifies that an
OSPFv3 packet has been retransmitted on a non-
virtual interface. All packets that may be re-
transmitted are associated with an LSDB entry.
The LS type, LS ID, and Router ID are used to
identify the LSDB entry. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.11.1.44.1.16.0.9 |
hpicfOspfv3VirtIfTxRetransmitAn hpicfOspfv3VirtIfTxRetransmit trap signifies that
an OSPFv3 packet has been retransmitted on a virtual
interface. All packets that may be retransmitted
are associated with an LSDB entry. The LS type,
LS ID, and Router ID are used to identify the LSDB
entry. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.11.1.44.1.16.0.10 |
hpicfOspfv3OriginateLsaAn hpicfOspfv3OriginateLsa trap signifies that a new
LSA has been originated by this router. This
trap should not be invoked for simple refreshes
of LSAs (which happesn every 30 minutes), but
instead will only be invoked when an LSA is
(re)originated due to a topology change. Addi-
tionally, this trap does not include LSAs that
are being flushed because they have reached
MaxAge. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.11.1.44.1.16.0.11 |
hpicfOspfv3MaxAgeLsaAn hpicfOspfv3MaxAgeLsa trap signifies that one of
the LSA in the router's link-state database has
aged to MaxAge. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.11.1.44.1.16.0.12 |
hpicfOspfv3UnknownLsaAn hpicfOspfv3UnknownLsa trap signifies that one of
the neighbor has sent an unknown LSA. Only DR generates
this trap and If NBR state is less than Exchange
need not originate this trap NOTIFICATION-TYPE .1.3.6.1.4.1.25506.11.1.44.1.16.0.13 |
hpicfOspfv3AsbrStatusChangeAn hpicfOspfv3AsbrStatusChange trap signifies
that device's ASBR Status has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.11.1.44.1.16.0.16 |
hpicfOspfv3AbrStatusChangeAn hpicfOspfv3AbrStatusChange trap signifies
that device's ABR Status has changed.
There are two distinct definitions
of ABR given by IBM & Cisco, Implementations are free
to follow their own interpretation of ABR while
originating this trap NOTIFICATION-TYPE .1.3.6.1.4.1.25506.11.1.44.1.16.0.17 |
hpicfOspfv3TrapControl OBJECT IDENTIFIER .1.3.6.1.4.1.25506.11.1.44.1.16.1 |
hpicfOspfv3SetTrapA four-octet string serving as a bit map for
the trap events defined by the OSPFv3 traps. This
object is used to enable and disable specific
OSPFv3 traps where a 1 in the bit field represents
enabled. The right-most bit (least significant)
represents trap 0.rw OCTET STRING .1.3.6.1.4.1.25506.11.1.44.1.16.1.1 |
hpicfOspfv3LsdbAreaIdThe 32-bit identifier of the Area from which the
LSA was received.ro Ospfv3AreaIdTC (OSPFV3-MIB) .1.3.6.1.4.1.25506.11.1.44.1.16.1.2 |
hpicfOspfv3LsdbTypeThe type of the link state advertisement.
Each link state type has a separate
advertisement format. Area-Scope LSAs unrecognized
by the router are also stored in this database.ro Unsigned32(0..'FFFFFFFF'h) .1.3.6.1.4.1.25506.11.1.44.1.16.1.3 |
hpicfOspfv3LsdbRouterIdThe 32-bit number that uniquely identifies the
originating router in the Autonomous System.ro Ospfv3RouterIdTC (OSPFV3-MIB) .1.3.6.1.4.1.25506.11.1.44.1.16.1.4 |
hpicfOspfv3LsdbLsidThe Link State ID is an LS Type Specific field
containing a unique identifier;
it identifies the piece of the routing domain
that is being described by the advertisement.
In contrast to OSPFv2, the LSID has no
addressing semantics.ro Ospfv3LsIdTC (OSPFV3-MIB) .1.3.6.1.4.1.25506.11.1.44.1.16.1.5 |
hpicfOspfv3Conformance OBJECT IDENTIFIER .1.3.6.1.4.1.25506.11.1.44.2 |
hpicfOspfv3Groups OBJECT IDENTIFIER .1.3.6.1.4.1.25506.11.1.44.2.1 |
hpicfOspfv3Compliances OBJECT IDENTIFIER .1.3.6.1.4.1.25506.11.1.44.2.2 |