HP-ICF-ISOLATED-PORTS-MIB
AI MIB Summary
The HP-ICF-ISOLATED-PORTS-MIB enables SNMP-based configuration and monitoring of port isolation settings within VLANs on HP Intelligent Management Center (IMC) or Comware-based networking hardware. It exposes proprietary objects to define and verify which ports are restricted from communicating with other ports within the same broadcast domain, enforcing Layer 2 security segmentation.
This MIB module contains the HP proprietary objects for configuring and managing the isolated ports on the VLAN.
Main OID:
hpicfDot1qIsolatedPorts.1.3.6.1.4.1.25506.11.1.109
8
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
8 total| Object Name |
|---|
hpicfDot1qIsolatedPortsThis MIB module contains the HP proprietary objects for configuring and
managing the isolated ports on the VLAN. MODULE-IDENTITY .1.3.6.1.4.1.25506.11.1.109 |
hpicfDot1qIsolatedPortConfigurationObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25506.11.1.109.1 |
hpicfDot1qIsolatedPortsTableA table that contains the information about all the isolated
ports of the VLANs on a device. Each VLAN can have a single
isolate-list. The isolate-list holds a list of isolated ports
that cannot forward the traffic to other isolated ports on the
same VLAN. SEQUENCE OF HpicfDot1qIsolatedPortsEntry .1.3.6.1.4.1.25506.11.1.109.1.1 |
hpicfDot1qIsolatedPortsEntryAn entry in the table that contains the information about the
isolated ports of a VLAN. HpicfDot1qIsolatedPortsEntry .1.3.6.1.4.1.25506.11.1.109.1.1.1 |
hpicfDot1qVlanStaticIsolatedPortsThis object contains a list of isolated ports in the VLAN.
Traffic received on isolated ports will not be forwarded to
other isolated ports in the VLAN, only to non-isolated ports.rw PortList (Q-BRIDGE-MIB) .1.3.6.1.4.1.25506.11.1.109.1.1.1.1 |
hpicfDot1qIsolatedPortConformance OBJECT IDENTIFIER .1.3.6.1.4.1.25506.11.1.109.2 |
hpicfDot1qIsolatedPortCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.25506.11.1.109.2.1 |
hpicfDot1qIsolatedPortGroups OBJECT IDENTIFIER .1.3.6.1.4.1.25506.11.1.109.2.2 |