HIPATH-WIRELESS-BRANCH-OFFICE-MIB
The HIPATH-WIRELESS-BRANCH-OFFICE-MIB facilitates the SNMP-based configuration and monitoring of branch office wireless LAN access controllers within the Siemens HiPath ecosystem. It exposes management objects for defining access point parameters, managing SSID profiles, and tracking radio interface states to ensure consistent wireless connectivity across distributed branch locations.
Imported Objects
Objects
17 total| Object Name |
|---|
hiPathWirelessBranchOfficeMib OBJECT IDENTIFIER .1.3.6.1.4.1.4329.15.3.22 |
branchOfficeObjects OBJECT IDENTIFIER .1.3.6.1.4.1.4329.15.3.22.1 |
branchOfficeTableTable of branch office configuration values for the access points.obsolete SEQUENCE OF BranchOfficeEntry .1.3.6.1.4.1.4329.15.3.22.1.1 |
branchOfficeEntryBranch office configuration values for a specific access point.obsolete BranchOfficeEntry .1.3.6.1.4.1.4329.15.3.22.1.1.1 |
boConnectModeAccess point connection mode - use a static definition or service discovery.rwobsolete Enumeration .1.3.6.1.4.1.4329.15.3.22.1.1.1.1 |
boIpAllocationIndicates if access point is to use DHCP to acquire an IP address or has a statically configured IP address.rwobsolete Enumeration .1.3.6.1.4.1.4329.15.3.22.1.1.1.2 |
boStaticIpAddressIf access point is statically configured, contains the IP addres.rwobsolete IpAddress .1.3.6.1.4.1.4329.15.3.22.1.1.1.3 |
boStaticNetmaskNetmask for the access point if statically configured.rwobsolete IpAddress .1.3.6.1.4.1.4329.15.3.22.1.1.1.4 |
boStaticGatewayDefault gateway for the access point if statically configured.rwobsolete IpAddress .1.3.6.1.4.1.4329.15.3.22.1.1.1.5 |
boRebootOnPollFailureIndicates if access point should reboot on a poll failure (disabling wireless access) or continue to provide limited local wireless service.rwobsolete Integer32 .1.3.6.1.4.1.4329.15.3.22.1.1.1.6 |
branchOfficeHWCTableContains the list of access controller IP addressIf an access point has a static. SEQUENCE OF BranchOfficeHWCEntry .1.3.6.1.4.1.4329.15.3.22.1.2 |
branchOfficeHWCEntryThe access controller search list for an access point. BranchOfficeHWCEntry .1.3.6.1.4.1.4329.15.3.22.1.2.1 |
boHWCConnectOrderThe position of the access controller in the search list.rw Integer32 .1.3.6.1.4.1.4329.15.3.22.1.2.1.1 |
boHWCIpAddressIP address of the access controller.rw IpAddress .1.3.6.1.4.1.4329.15.3.22.1.2.1.2 |
boHWCRowStatusRowStatus attribute to control modification of branchOfficeHWCTable.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.4329.15.3.22.1.2.1.3 |
hiPathWirelessBranchOfficeConformance OBJECT IDENTIFIER .1.3.6.1.4.1.4329.15.3.22.2 |
hiPathWirelessBranchOfficeMIBBranch office configuration MIB for the high path wireless LAN access controller. MODULE-IDENTITY .1.3.6.1.4.1.4329.15.5.4 |
More MIBs from Chantry
Browse all ChantryMIBs →SNMP MIB module
SNMP MIB module
The HIPATH-WIRELESS-HWC-MIB facilitates SNMP-based monitoring and management of Siemens HIPATH wireless access controllers, specifically tracking radio interface states, connected client session counts, and hardware controller health metrics.
The HIPATH-WIRELESS-DOT11-EXTNS-MIB extends the standard IEEE 802.11 MIB to enable monitoring of proprietary Siemens HIPATH wireless LAN parameters, including specific radio interface statistics, association states, and signal quality metrics not covered by the base standard.
The HIPATH-WIRELESS-PRODUCTS-MIB provides object identifiers for monitoring and managing Siemens HIPATH wireless access points and controllers, enabling the retrieval of device status, interface statistics, and radio performance metrics.
The HIPATH-WIRELESS-SMI module provides the foundational schema for monitoring and managing Siemens HIPATH wireless access points and controllers, specifically defining the structure for tracking radio interface states, client association counts, signal strength metrics, and transmission error counters.