HH3C-MCDR-MIB
Imported Objects
Objects
20 total| Object Name |
|---|
hh3cMultCDRThe initial version of this MIB file. MODULE-IDENTITY .1.3.6.1.4.1.25506.2.86 |
hh3cMultCDRCfgObject OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.86.1 |
hh3cMultCDRStatusConfigure to enable or disable multicast CDR function.rw Enumeration .1.3.6.1.4.1.25506.2.86.1.1 |
hh3cMultCDRReportIntervalConfigure the multicast CDR report-interval. Unit: second.rw INTEGER .1.3.6.1.4.1.25506.2.86.1.2 |
hh3cMultCDRCacheLimitConfigure the multicast CDR cache-limit.rw INTEGER .1.3.6.1.4.1.25506.2.86.1.3 |
hh3cMultCDRRecordDelayConfigure the multicast CDR record-delay. Unit: secondrw INTEGER .1.3.6.1.4.1.25506.2.86.1.4 |
hh3cMultCDRRecordSendSend record at once.rw Enumeration .1.3.6.1.4.1.25506.2.86.1.5 |
hh3cMultUserOnlineInfoTableMulticast user online information table. SEQUENCE OF Hh3cMultUserOnlineInfoEntry .1.3.6.1.4.1.25506.2.86.2 |
hh3cMultUserOnlineInfoEntryThe entry of multicast user online information table. Hh3cMultUserOnlineInfoEntry .1.3.6.1.4.1.25506.2.86.2.1 |
hh3cMultUserRecordIDThe index of online record. Unsigned32 .1.3.6.1.4.1.25506.2.86.2.1.1 |
hh3cMultUserSubIfIndexThe index of sub-interface which is active.
If the value is zero, hh3cMultUserSubIfIndex should be ignored.ro Unsigned32 .1.3.6.1.4.1.25506.2.86.2.1.2 |
hh3cMultUserVlanIDThe ID of VLAN in which the user joined the multicast group.ro VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.25506.2.86.2.1.3 |
hh3cMultUserJoinGAddrTypeType of the multicast group IP address.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.86.2.1.4 |
hh3cMultUserJoinGAddrThe multicast group address which the user joined.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.86.2.1.5 |
hh3cMultUserJoinSAddrTypeType of the multicast source IP address.ro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.86.2.1.6 |
hh3cMultUserJoinSAddrThe multicast source address which the user joined.
If the value is '0.0.0.0'(IPv4) or '::'(IPv6), hh3cMultUserJoinSAddr
should be ignored.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.86.2.1.7 |
hh3cMultUserStatusThe current status of user.
permit - user in permit status.
preview - user in preview status.ro Enumeration .1.3.6.1.4.1.25506.2.86.2.1.8 |
hh3cMultUserJoinTimeThe time when the user joined the multicast group.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.25506.2.86.2.1.9 |
hh3cMultUserPreviewTimesThe times of multicast preview which the user joined.
If hh3cMultUserStatus is not preview, hh3cMultUserPreviewTimes
should be ignored.ro Unsigned32 .1.3.6.1.4.1.25506.2.86.2.1.10 |
hh3cMultUserPreviewRemainThe remanent time slice of multicast preview which the user joined.
If hh3cMultUserStatus is not preview, hh3cMultUserPreviewRemain
should be ignored.ro Unsigned32 .1.3.6.1.4.1.25506.2.86.2.1.11 |
More MIBs from Hangzhou H3C
Browse all Hangzhou H3CMIBs →SNMP MIB module
SNMP MIB module
The HH3C-DOT11-APMT-MIB module enables monitoring of H3C wireless access points (both Fat and Fit modes) and their associated Access Controllers via CAPWAP tunnels, specifically tracking real-time AP operational states, association statistics, and BSS radio metrics.
The HH3C-ACL-MIB enables monitoring and configuration of Access Control List (ACL) entries, packet filtering rules, and associated hit counters on H3C network devices. It provides visibility into specific traffic matching statistics, rule hit counts, and policy enforcement status for ingress and egress filtering operations.
The HH3C-CBQOS2-MIB enables the configuration and real-time monitoring of Class-Based QoS policies on H3C network devices, specifically tracking classifier definitions, traffic matching rules, behavior actions (such as CAR, GTS, and WRED), and policy application status across interfaces, VLANs, and PVCs.
SNMP MIB module