HH3C-LswVLAN-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for HH3C-LswVLAN-MIB.
Main OID:
hh3cLswVlan.1.3.6.1.4.1.25506.8.35.2
77
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
77 total| Object Name |
|---|
hh3cLswVlan MODULE-IDENTITY .1.3.6.1.4.1.25506.8.35.2 |
hh3cLswVlanMngObjectDescription. OBJECT IDENTIFIER .1.3.6.1.4.1.25506.8.35.2.1 |
hh3cdot1qVlanMIBTableVLAN MIB table SEQUENCE OF Hh3cDot1qVlanMIBEntry .1.3.6.1.4.1.25506.8.35.2.1.1 |
hh3cdot1qVlanMIBEntryEntries of VLAN MIB table Hh3cDot1qVlanMIBEntry .1.3.6.1.4.1.25506.8.35.2.1.1.1 |
hh3cdot1qVlanIndexThe VLAN-ID.ro Hh3cVlanIndex .1.3.6.1.4.1.25506.8.35.2.1.1.1.1 |
hh3cdot1qVlanNameName of the VLAN.rw SnmpAdminString .1.3.6.1.4.1.25506.8.35.2.1.1.1.2 |
hh3cdot1qVlanPortsPort list of the VLAN.rw PortList (HH3C-LswINF-MIB) .1.3.6.1.4.1.25506.8.35.2.1.1.1.3 |
hh3cdot1qVlanTypeVlan types: SuperVlan(1), Common vlan(2), and Sub-vlan(3).rw Enumeration .1.3.6.1.4.1.25506.8.35.2.1.1.1.4 |
hh3cdot1qVlanMacFilterWhether to filter MAC addresses.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.8.35.2.1.1.1.5 |
hh3cdot1qVlanMcastUnknownProtosWhether to broadcast the unknown packets.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.8.35.2.1.1.1.6 |
hh3cExistInterfaceWhether there is virtual interface.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.8.35.2.1.1.1.7 |
hh3cVlanInterfaceIndexWhether vlan interface is configured on vlan. If vlan interface is
configured, the value of the node is vlan id, else the value is 0.ro INTEGER .1.3.6.1.4.1.25506.8.35.2.1.1.1.8 |
hh3cdot1qVlanMacLearnMAC address learning identity. (common vlan/Sub-vlan)ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.8.35.2.1.1.1.9 |
hh3cdot1qVlanStatusStatus of the VLAN.ro Enumeration .1.3.6.1.4.1.25506.8.35.2.1.1.1.10 |
hh3cdot1qVlanCreationTimeThe sysUPTime when the VLAN is created.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.25506.8.35.2.1.1.1.11 |
hh3cdot1qVlanPriorityPriority of the VLAN.rw INTEGER .1.3.6.1.4.1.25506.8.35.2.1.1.1.12 |
hh3cdot1qVlanRowStatusOperation status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.8.35.2.1.1.1.13 |
hh3cdot1qVlanBroadcastSuppressionWhether broadcast suppression of vlan be supported pro rata.
The vlaue of 100 indicates no broadcast suppression. If the
function is not supported, this object cannot be written,
and 100 will be returned when readingrw INTEGER .1.3.6.1.4.1.25506.8.35.2.1.1.1.14 |
hh3cdot1qVlanBcastSuppressionPPSIf the broadcast can be controlled with pps(packet per second)type,
the value of 0 indicates no suppression. This node is conflicted
with hh3cdot1qVlanBroadcastSuppression. If the mode is set,
hh3cdot1qVlanBroadcastSuppression is unavailable. And vice versa.rw INTEGER .1.3.6.1.4.1.25506.8.35.2.1.1.1.15 |
hh3cdot1qVlanMulticastMulticast vlan. The default value is disable(0).rw Enumeration .1.3.6.1.4.1.25506.8.35.2.1.1.1.16 |
hh3cdot1qVlanTaggedPortsTagged port list of the VLAN.ro PortList (HH3C-LswINF-MIB) .1.3.6.1.4.1.25506.8.35.2.1.1.1.17 |
hh3cdot1qVlanUntaggedPortsUntagged port list of the VLAN.ro PortList (HH3C-LswINF-MIB) .1.3.6.1.4.1.25506.8.35.2.1.1.1.18 |
hh3cdot1qVlanPortIndexsPortIndex list of the VLAN, that delimited by comma, such as 1,3,4,7.rw OCTET STRING .1.3.6.1.4.1.25506.8.35.2.1.1.1.19 |
hh3cVlanInterfaceTableVirtual interface configuration table SEQUENCE OF Hh3cVlanInterfaceEntry .1.3.6.1.4.1.25506.8.35.2.1.2 |
hh3cVlanInterfaceEntryEntries of virtual interface configuration table Hh3cVlanInterfaceEntry .1.3.6.1.4.1.25506.8.35.2.1.2.1 |
hh3cVlanInterfaceIDIndex of the vlan interface table.ro INTEGER .1.3.6.1.4.1.25506.8.35.2.1.2.1.1 |
hh3cdot1qVlanIDVLAN-IDro Hh3cVlanIndex .1.3.6.1.4.1.25506.8.35.2.1.2.1.2 |
hh3cdot1qVlanIpAddressIP address of interface.rw IpAddress .1.3.6.1.4.1.25506.8.35.2.1.2.1.3 |
hh3cdot1qVlanIpAddressMaskIP address mask of interface.rw IpAddress .1.3.6.1.4.1.25506.8.35.2.1.2.1.4 |
hh3cVlanInterfaceAdminStatusStatus of VLAN virtual interfaces.rw Enumeration .1.3.6.1.4.1.25506.8.35.2.1.2.1.5 |
hh3cVlanInterfaceFrameTypeFrame type accepted by VLAN virtual interfaces.ro Enumeration .1.3.6.1.4.1.25506.8.35.2.1.2.1.6 |
hh3cInterfaceRowStatusOperation status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.8.35.2.1.2.1.7 |
hh3cVlanInterfaceIpMethodVlan interface ip address acquiring method which is manual, dhcp or bootp.rw Enumeration .1.3.6.1.4.1.25506.8.35.2.1.2.1.8 |
hh3cVlanInterfaceIfIndexIfIndex of VLAN interface.ro INTEGER .1.3.6.1.4.1.25506.8.35.2.1.2.1.9 |
hh3cifIsolateMappingTableSecondary vlan lists of Isolate-VLANs. SEQUENCE OF Hh3cifIsolateMappingEntry .1.3.6.1.4.1.25506.8.35.2.1.4 |
hh3cifIsolateMappingEntrySecondary vlan lists of Isolate-VLANs. Hh3cifIsolateMappingEntry .1.3.6.1.4.1.25506.8.35.2.1.4.1 |
hh3cifIsolatePrimaryVlanIDPrimary VLAN-ID.ro Hh3cVlanIndex .1.3.6.1.4.1.25506.8.35.2.1.4.1.1 |
hh3cifIsolateSecondaryVlanlistLowEach octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 1 through
8, the second octet specifying VLANs 9 through 16, etc.
Within each octet, the most significant bit represents
the highest numbered VLAN, and the least significant bit
represents the lowest numbered VLAN. Thus, each secondary
VLAN of the primary VLAN is represented by a single bit
within the value of this object. If that bit has a value
of '1' then that VLAN is secondary VLAN in the set of VLANs;
the VLAN is not secondary VLAN if its bit has a value of
'0'.rw OCTET STRING .1.3.6.1.4.1.25506.8.35.2.1.4.1.2 |
hh3cifIsolateSecondaryVlanlistHighEach octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 2049 through
2056, the second octet specifying VLANs 2057 through 2064,
etc. Within each octet, the most significant bit represents
the highest numbered VLAN, and the least significant bit
represents the lowest numbered VLAN. Thus, each secondary
VLAN of the primary VLAN is represented by a single bit
within the value of this object. If that bit has a value
of '1' then that VLAN is secondary VLAN in the set of VLANs;
the VLAN is not secondary VLAN if its bit has a value of
'0'.rw OCTET STRING .1.3.6.1.4.1.25506.8.35.2.1.4.1.3 |
hh3cVlanInterfaceAddrTableVLAN interface IP address configuration table SEQUENCE OF Hh3cVlanInterfaceAddrEntry .1.3.6.1.4.1.25506.8.35.2.1.5 |
hh3cVlanInterfaceAddrEntryEntries of VLAN interface IP address configuration table Hh3cVlanInterfaceAddrEntry .1.3.6.1.4.1.25506.8.35.2.1.5.1 |
hh3cVlanInterfaceIpIfIndexIndex of VLAN interfaces.ro INTEGER .1.3.6.1.4.1.25506.8.35.2.1.5.1.1 |
hh3cVlanInterfaceIpAddrIP address of VLAN interface.ro IpAddress .1.3.6.1.4.1.25506.8.35.2.1.5.1.2 |
hh3cVlanInterfaceIpMaskIP address mask of VLAN interface. When destory single IP address,
you must set it correct to relative IP address.rw IpAddress .1.3.6.1.4.1.25506.8.35.2.1.5.1.3 |
hh3cVlanInterfaceIpTypeIP address type.rw Enumeration .1.3.6.1.4.1.25506.8.35.2.1.5.1.4 |
hh3cVlanInterfaceIpRowStatusOperation status. active(1) will only be set when taking GET or
GET NEXT operation. createAndGo(4) and destory(6) is valid when
taking SET operation.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.8.35.2.1.5.1.5 |
hh3cDot1qVlanBatchMIBTableVLAN batch configuration table.
In the case of VLAN batch creation, hh3cdot1qVlanBatchSetOperate should
be set to 1.
For example, if creating a row is for creating VLANs 2 to 4, the value
of the objects should be set as follows:
hh3cdot1qVlanBatchStartIndex 2,
hh3cdot1qVlanBatchEndIndex 4,
hh3cdot1qVlanBatchSetOperate create(1),
hh3cdot1qVlanBatchRowStatus createAndGo(4).
In the case of VLAN batch deletion, hh3cdot1qVlanBatchSetOperate should
be set to 2.
For example, if creating a row is for deleting VLANs 10 to 20, the value
of the objects should be set as follows:
hh3cdot1qVlanBatchStartIndex 10,
hh3cdot1qVlanBatchEndIndex 20,
hh3cdot1qVlanBatchSetOperate delete(2),
hh3cdot1qVlanBatchRowStatus createAndGo(4).
When the action of batch VLANs deleting or creating is done, one row
will be existent until it is deleted manually or ages out, but the VLANs
of it won't disappear with the deletion of the row. SEQUENCE OF Hh3cDot1qVlanBatchMIBEntry .1.3.6.1.4.1.25506.8.35.2.1.6 |
hh3cDot1qVlanBatchMIBEntryVLAN batch configuration entry. Hh3cDot1qVlanBatchMIBEntry .1.3.6.1.4.1.25506.8.35.2.1.6.1 |
hh3cdot1qVlanBatchOperIndexThe consequence of operation.ro Integer32 .1.3.6.1.4.1.25506.8.35.2.1.6.1.1 |
hh3cdot1qVlanBatchStartIndexThe value of start VLAN-ID.rw Hh3cVlanIndex .1.3.6.1.4.1.25506.8.35.2.1.6.1.2 |
hh3cdot1qVlanBatchEndIndexThe value of end VLAN-ID.rw Hh3cVlanIndex .1.3.6.1.4.1.25506.8.35.2.1.6.1.3 |
hh3cdot1qVlanBatchOperStatusThe status of operation.ro Enumeration .1.3.6.1.4.1.25506.8.35.2.1.6.1.4 |
hh3cdot1qVlanBatchRowStatusThe row status of Hh3cDot1qVlanBatchMIBEntry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.8.35.2.1.6.1.5 |
hh3cdot1qVlanBatchSetOperateVLAN batch creation or deletion.rw Enumeration .1.3.6.1.4.1.25506.8.35.2.1.6.1.6 |
hh3cifSuperVlanMappingTableSub VLAN lists of super-VLANs. SEQUENCE OF Hh3cifSuperVlanMappingEntry .1.3.6.1.4.1.25506.8.35.2.1.7 |
hh3cifSuperVlanMappingEntrySub VLAN lists of super-VLANs. Hh3cifSuperVlanMappingEntry .1.3.6.1.4.1.25506.8.35.2.1.7.1 |
hh3cifSuperVlanIDSuper VLAN ID.ro Hh3cVlanIndex .1.3.6.1.4.1.25506.8.35.2.1.7.1.1 |
hh3cifSubVlanlistLowEach octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 1 through
8, the second octet specifying VLANs 9 through 16, etc.
Within each octet, the most significant bit represents
the highest numbered VLAN, and the least significant bit
represents the lowest numbered VLAN. Thus, each sub
VLAN of the super VLAN is represented by a single bit
within the value of this object. If that bit has a value
of '1' then that VLAN is a sub VLAN of the super VLAN; the
VLAN is not a sub VLAN of the super VLAN if its bit has
a value of '0'.rw OCTET STRING .1.3.6.1.4.1.25506.8.35.2.1.7.1.2 |
hh3cifSubVlanlistHighEach octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 2049 through
2056, the second octet specifying VLANs 2057 through 2064,
etc. Within each octet, the most significant bit represents
the highest numbered VLAN, and the least significant bit
represents the lowest numbered VLAN. Thus, each sub
VLAN of the super VLAN is represented by a single bit
within the value of this object. If that bit has a value of
'1' then that VLAN is a sub VLAN of the super VLAN; the
VLAN is not a sub VLAN of the super VLAN if its bit has
a value of '0'.rw OCTET STRING .1.3.6.1.4.1.25506.8.35.2.1.7.1.3 |
hh3cPrivateVlanMappingTableSecondary vlan lists of Primary-VLANs. SEQUENCE OF Hh3cPrivateVlanMappingEntry .1.3.6.1.4.1.25506.8.35.2.1.8 |
hh3cPrivateVlanMappingEntrySecondary vlan lists of Primary-VLANs. Hh3cPrivateVlanMappingEntry .1.3.6.1.4.1.25506.8.35.2.1.8.1 |
hh3cPrimaryVlanIDPrimary VLAN-ID.ro Hh3cVlanIndex .1.3.6.1.4.1.25506.8.35.2.1.8.1.1 |
hh3cSecondaryVlanlistLowEach octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 1 through
8, the second octet specifying VLANs 9 through 16, etc.
Within each octet, the most significant bit represents
the highest numbered VLAN, and the least significant bit
represents the lowest numbered VLAN. Thus, each secondary
VLAN of the primary VLAN is represented by a single bit
within the value of this object. If that bit has a value
of '1' then that VLAN is secondary VLAN in the set of VLANs;
the VLAN is not secondary VLAN if its bit has a value of
'0'.rw OCTET STRING .1.3.6.1.4.1.25506.8.35.2.1.8.1.2 |
hh3cSecondaryVlanlistHighEach octet within this value specifies a set of eight
VLANs, with the first octet specifying VLANs 2049 through
2056, the second octet specifying VLANs 2057 through 2064,
etc. Within each octet, the most significant bit represents
the highest numbered VLAN, and the least significant bit
represents the lowest numbered VLAN. Thus, each secondary
VLAN of the primary VLAN is represented by a single bit
within the value of this object. If that bit has a value
of '1' then that VLAN is secondary VLAN in the set of VLANs;
the VLAN is not secondary VLAN if its bit has a value of
'0'.rw OCTET STRING .1.3.6.1.4.1.25506.8.35.2.1.8.1.3 |
hh3cLswVlanProtoObjectDescription. OBJECT IDENTIFIER .1.3.6.1.4.1.25506.8.35.2.2 |
hh3cVLANMibGarpLeaveAllTimeThe GARP LeaveAll time, in centiseconds.rw TimeInterval (SNMPv2-TC) .1.3.6.1.4.1.25506.8.35.2.2.14 |
hh3cvLANMibSwitchCountTableA table containing the information various statistics of switch. SEQUENCE OF Hh3cVLANMibSwitchCountEntry .1.3.6.1.4.1.25506.8.35.2.2.15 |
hh3cvLANMibSwitchCountEntryA table containing the information various statistics of switch. Hh3cVLANMibSwitchCountEntry .1.3.6.1.4.1.25506.8.35.2.2.15.1 |
hh3cVLANMibSwitchGMRPRXPktNumber of GMRP frames received.ro Counter32 .1.3.6.1.4.1.25506.8.35.2.2.15.1.1 |
hh3cVLANMibSwitchGVRPRXPktNumber of GVRP frames received.ro Counter32 .1.3.6.1.4.1.25506.8.35.2.2.15.1.2 |
hh3cVLANMibSwitchGMRPTXPktNumber of GMRP frames transmitted.ro Counter32 .1.3.6.1.4.1.25506.8.35.2.2.15.1.3 |
hh3cVLANMibSwitchGVRPTXPktNumber of GVRP frames transmitted.ro Counter32 .1.3.6.1.4.1.25506.8.35.2.2.15.1.4 |
hh3cVLANMibSwitchDiscardedPktNumber of discarded frames.ro Counter32 .1.3.6.1.4.1.25506.8.35.2.2.15.1.5 |
hh3cVLANMibSwitchGarpStatClearClear various Statistics viz. read operation not supported.rw Enumeration .1.3.6.1.4.1.25506.8.35.2.2.15.1.6 |
hh3cvLANMibHoldTimeTableA table for setting/getting the Hold Time for a particular port. SEQUENCE OF Hh3cVLANMibHoldTimeEntry .1.3.6.1.4.1.25506.8.35.2.2.16 |
hh3cvLANMibHoldTimeEntryA table for setting/getting the HoldTime of the port. Hh3cVLANMibHoldTimeEntry .1.3.6.1.4.1.25506.8.35.2.2.16.1 |
hh3cVLANMibHoldTimeHoldTime of the port.rw INTEGER .1.3.6.1.4.1.25506.8.35.2.2.16.1.1 |