HH3C-LswINF-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for HH3C-LswINF-MIB.
Main OID:
hh3cLswL2InfMib.1.3.6.1.4.1.25506.8.35.5
137
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
137 total| Object Name |
|---|
hh3cLswExtInterface OBJECT IDENTIFIER .1.3.6.1.4.1.25506.8.35.1 |
hh3cifXXTableExtended interface information table. SEQUENCE OF Hh3cIfXXEntry .1.3.6.1.4.1.25506.8.35.1.1 |
hh3cifXXEntryEntries of extended interface information table. Hh3cIfXXEntry .1.3.6.1.4.1.25506.8.35.1.1.1 |
hh3cifUnBoundPortWhether it is the unbound port. (true indicates that the port is the main port of the aggregation or the port does not participate in the aggregation.)ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.8.35.1.1.1.1 |
hh3cifISPhyPortWhether it is a physical interface.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.8.35.1.1.1.2 |
hh3cifAggregatePortWhether it is the aggregated port. (if the port participates in the aggregation, this value is true.)ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.8.35.1.1.1.3 |
hh3cifMirrorPortWhether it is a mirror port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.8.35.1.1.1.4 |
hh3cifVLANTypeport vlan types. hybrid (3) port can carry multiple VLANs. If fabric function is supported, fabric(4) means the port is a fabric port.rw Enumeration .1.3.6.1.4.1.25506.8.35.1.1.1.5 |
hh3cifMcastControlBroadcast storm suppression with the step length of 1, ranging from 0 to 100 percent. In some products the step is 5, ranging from 0 to 100.rw INTEGER .1.3.6.1.4.1.25506.8.35.1.1.1.6 |
hh3cifFlowControlFlow control status.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.8.35.1.1.1.7 |
hh3cifSrcMacControlWhether to filter by source MAC address.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.8.35.1.1.1.8 |
hh3cifClearStatClear specify port statistics. Operation read is not supported.rw Enumeration .1.3.6.1.4.1.25506.8.35.1.1.1.9 |
hh3cifXXBasePortIndexIndex number of the port and the first port index of the device is 1.ro INTEGER .1.3.6.1.4.1.25506.8.35.1.1.1.10 |
hh3cifXXDevPortIndexDevice index of the port.ro INTEGER .1.3.6.1.4.1.25506.8.35.1.1.1.11 |
hh3cifPpsMcastControlThe broadcast suppression with pps(packet per second) type. The max value is determined by the port type and product.rw Integer32 .1.3.6.1.4.1.25506.8.35.1.1.1.12 |
hh3cifPpsBcastDisValControlControl the port's pps(packet per second) broadcast suppression. When the port is enabled, its pps broadcast suppression value is the global disperse value, and when disabled, it doesn't suppress broadcast.rw Enumeration .1.3.6.1.4.1.25506.8.35.1.1.1.13 |
hh3cifUniSuppressionStepThe step of unicast suppression in ratio mode.ro Integer32 .1.3.6.1.4.1.25506.8.35.1.1.1.14 |
hh3cifPpsUniSuppressionMaxThe max pps(packet per second) value of unicast suppression in pps mode.ro Integer32 .1.3.6.1.4.1.25506.8.35.1.1.1.15 |
hh3cifMulSuppressionStepThe step of multicast suppression in ratio mode.ro Integer32 .1.3.6.1.4.1.25506.8.35.1.1.1.16 |
hh3cifPpsMulSuppressionMaxThe max pps(packet per second) value of multicast suppression in pps mode.ro Integer32 .1.3.6.1.4.1.25506.8.35.1.1.1.17 |
hh3cifUniSuppressionThe unicast suppression with the ranging from 0 to 100 percent in ratio mode. The step is determined by hh3cifUniSuppressionStep.rw Integer32 .1.3.6.1.4.1.25506.8.35.1.1.1.18 |
hh3cifPpsUniSuppressionThe unicast suppression in pps(packet per second) mode. The max value is determined by hh3cifPpsUniSuppressionMax.rw Integer32 .1.3.6.1.4.1.25506.8.35.1.1.1.19 |
hh3cifMulSuppressionThe multicast suppression with ranging from 0 to 100 percent in ratio mode. The step is determined by hh3cifMulSuppressionStep.rw Integer32 .1.3.6.1.4.1.25506.8.35.1.1.1.20 |
hh3cifPpsMulSuppressionThe multicast suppression in pps(packet per second) mode. The max pps value is determined by hh3cifPpsMulSuppressionMax.rw Integer32 .1.3.6.1.4.1.25506.8.35.1.1.1.21 |
hh3cifComboActivePortActive port on combo interface.rwobsolete Enumeration .1.3.6.1.4.1.25506.8.35.1.1.1.22 |
hh3cifBMbpsMulSuppressionMaxThe maximum value of the multicast suppression with bandwidth-based(Mbps) that a port can be configured.ro Integer32 .1.3.6.1.4.1.25506.8.35.1.1.1.23 |
hh3cifBMbpsMulSuppressionWith bandwidth-based multicast suppression, the bandwidth is measured in Mbps. The upper limit of the multicast suppession with bandwidth-based(Mbps) is the value of hh3cifBMbpsMulSuppressionMax in the entry. The default value of hh3cifBMbpsMulSuppression is the value of hh3cifBMbpsMulSuppressionMax.rw Integer32 .1.3.6.1.4.1.25506.8.35.1.1.1.24 |
hh3cifBKbpsMulSuppressionMaxThe maximum value of the multicast suppression with bandwidth-based(Kbps) that a port can be configured.ro Integer32 .1.3.6.1.4.1.25506.8.35.1.1.1.25 |
hh3cifBKbpsMulSuppressionStepThe step of multicast suppression with bandwidth-based(Kbps).ro Integer32 .1.3.6.1.4.1.25506.8.35.1.1.1.26 |
hh3cifBKbpsMulSuppressionWith bandwidth-based multicast suppression, the bandwidth is measured in Kbps. The upper limit of the multicast suppession with bandwidth-based(Kbps) is the value of hh3cifBKbpsMulSuppressionMax in the entry. The value of hh3cifBKbpsMulSuppression must be multiple of the value of hh3cifBKbpsMulSuppressionStep. The default value of hh3cifBKbpsMulSuppression is the value of hh3cifBKbpsMulSuppressionMax.rw Integer32 .1.3.6.1.4.1.25506.8.35.1.1.1.27 |
hh3cifUnknownPacketDropMulControl the port's unknown-multicast packets drop. When inbound direction is enabled on this port, the port will drop unknown-multicast packets in inbound direction. When outbound direction is enabled on this port, the port will drop unknown-multicast packets in outbound direction. When both directions are enabled on this port, the port will drop unknown-multicast packets in both inbound and outbound directions.rw DropDirection .1.3.6.1.4.1.25506.8.35.1.1.1.28 |
hh3cifUnknownPacketDropUniControl the port's unknown-unicast packets drop. When inbound direction is enabled on this port, the port will drop unknown-unicast packets in inbound direction. When outbound direction is enabled on this port, the port will drop unknown-unicast packets in outbound direction. When both directions are enabled on this port, the port will drop unknown-unicast packets in both inbound and outbound directions.rw DropDirection .1.3.6.1.4.1.25506.8.35.1.1.1.29 |
hh3cifBMbpsUniSuppressionMaxThe maximum value of the unicast suppression with bandwidth-based (Mbps) that a port can be configured.ro Integer32 .1.3.6.1.4.1.25506.8.35.1.1.1.30 |
hh3cifBMbpsUniSuppressionWith bandwidth-based Unicast suppression, the bandwidth is measured in Mbps. The upper limit of the unicast suppession with bandwidth-based(Mbps) is the value of hh3cifBMbpsUniSuppressionMax in the entry. The default value of hh3cifBMbpsUniSuppression is the value of hh3cifBMbpsUniSuppressionMax.rw Integer32 .1.3.6.1.4.1.25506.8.35.1.1.1.31 |
hh3cifBKbpsUniSuppressionMaxThe maximum value of the unicast suppression with bandwidth-based (Kbps) that a port can be configured.ro Integer32 .1.3.6.1.4.1.25506.8.35.1.1.1.32 |
hh3cifBKbpsUniSuppressionStepThe step of unicast suppression with bandwidth-based(Kbps).ro Integer32 .1.3.6.1.4.1.25506.8.35.1.1.1.33 |
hh3cifBKbpsUniSuppressionWith bandwidth-based unicast suppression, the bandwidth is measured in Kbps. The upper limit of the unicast suppession with bandwidth-based(Kbps) is the value of hh3cifBKbpsUniSuppressionMax in the entry. The value of hh3cifBKbpsUniSuppression must be multiple of the value of hh3cifBKbpsUniSuppressionStep. The default value of hh3cifBKbpsUniSuppression is the value of hh3cifBKbpsUniSuppressionMax.rw Integer32 .1.3.6.1.4.1.25506.8.35.1.1.1.34 |
hh3cifOutPayloadOctetsThe actual output octets of the interface.ro Counter64 .1.3.6.1.4.1.25506.8.35.1.1.1.35 |
hh3cifInPayloadOctetsThe actual input octets of the interface.ro Counter64 .1.3.6.1.4.1.25506.8.35.1.1.1.36 |
hh3cifInErrorPktsRateThe rate of inbound error packets on the interface.ro Integer32 .1.3.6.1.4.1.25506.8.35.1.1.1.37 |
hh3cifInPktsThe number of packets received on the interface.ro Counter64 .1.3.6.1.4.1.25506.8.35.1.1.1.38 |
hh3cifInNormalPktsThe number of normal packets received on the interface.ro Counter64 .1.3.6.1.4.1.25506.8.35.1.1.1.39 |
hh3cifOutPktsThe number of packets sent on the interface.ro Counter64 .1.3.6.1.4.1.25506.8.35.1.1.1.40 |
hh3cifAggregateTablePort aggregation information table. SEQUENCE OF Hh3cIfAggregateEntry .1.3.6.1.4.1.25506.8.35.1.2 |
hh3cifAggregateEntryPort aggregation information table. Hh3cIfAggregateEntry .1.3.6.1.4.1.25506.8.35.1.2.1 |
hh3cifAggregatePortIndexIndex number of the main aggregated port.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.25506.8.35.1.2.1.1 |
hh3cifAggregatePortNameAggregation group name.rw OCTET STRING .1.3.6.1.4.1.25506.8.35.1.2.1.2 |
hh3cifAggregatePortListPortsPortlist of a aggregating.rw PortList .1.3.6.1.4.1.25506.8.35.1.2.1.3 |
hh3cifAggregateModelLoad sharing mode for the port aggregation.rw Enumeration .1.3.6.1.4.1.25506.8.35.1.2.1.4 |
hh3cifAggregateOperStatusCurrent operation status of the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.8.35.1.2.1.5 |
hh3cifHybridPortTableHybrid-port configuration table. SEQUENCE OF Hh3cifHybridPortEntry .1.3.6.1.4.1.25506.8.35.1.3 |
hh3cifHybridPortEntryHybrid-port configuration table. Hh3cifHybridPortEntry .1.3.6.1.4.1.25506.8.35.1.3.1 |
hh3cifHybridPortIndexIndex number of Hybrid-port.ro INTEGER .1.3.6.1.4.1.25506.8.35.1.3.1.1 |
hh3cifHybridTaggedVlanListLowEach octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each tagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is tagged in the set of VLANs; the VLAN is not tagged if its bit has a value of '0'.rw OCTET STRING .1.3.6.1.4.1.25506.8.35.1.3.1.2 |
hh3cifHybridTaggedVlanListHighEach octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each tagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is tagged in the set of VLANs; the VLAN is not tagged if its bit has a value of '0'.rw OCTET STRING .1.3.6.1.4.1.25506.8.35.1.3.1.3 |
hh3cifHybridUnTaggedVlanListLowEach octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each untagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is untagged in the set of VLANs; the VLAN is not untagged if its bit has a value of '0'.rw OCTET STRING .1.3.6.1.4.1.25506.8.35.1.3.1.4 |
hh3cifHybridUnTaggedVlanListHighEach octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each untagged VLAN of the hybrid port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is untagged in the set of VLANs; the VLAN is not untagged if its bit has a value of '0'.rw OCTET STRING .1.3.6.1.4.1.25506.8.35.1.3.1.5 |
hh3cifComboPortTableCombo-port table. SEQUENCE OF Hh3cifComboPortEntry .1.3.6.1.4.1.25506.8.35.1.4 |
hh3cifComboPortEntryThe entry of hh3cifComboPortTable. Hh3cifComboPortEntry .1.3.6.1.4.1.25506.8.35.1.4.1 |
hh3cifComboPortIndexThe combo-port interface index. Its value is the same as the value of ifIndex in ifTable, but only includes indexes of the combo-port interfaces.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.25506.8.35.1.4.1.1 |
hh3cifComboPortCurActiveCurrent active interface of combo interfaces. The value 'fiber' means the interface with fiber connector of the pair of combo-port interfaces is active. The value 'copper' means the interface with copper connector of the pair is active. The value 'na' means not supported.rw Enumeration .1.3.6.1.4.1.25506.8.35.1.4.1.2 |
hh3cifPktBufTablePacket buffer table. SEQUENCE OF Hh3cifPktBufEntry .1.3.6.1.4.1.25506.8.35.1.5 |
hh3cifPktBufEntryThe entry of hh3cifPktBufTable. Hh3cifPktBufEntry .1.3.6.1.4.1.25506.8.35.1.5.1 |
hh3cifPktBufFreeThe number of packet buffers available for the interface.ro Integer32 .1.3.6.1.4.1.25506.8.35.1.5.1.1 |
hh3cifPktBufInitThe number of packet buffers allocated when the interface was created.ro Integer32 .1.3.6.1.4.1.25506.8.35.1.5.1.2 |
hh3cifPktBufMinThe smallest number of packet buffers available for the interface.ro Integer32 .1.3.6.1.4.1.25506.8.35.1.5.1.3 |
hh3cifPktBufMissThe number of times that the interface failed to obtain a packet buffer. Failure to obtain a buffer indicates that buffers were busy.ro Counter64 .1.3.6.1.4.1.25506.8.35.1.5.1.4 |
hh3cLswL2InfMib MODULE-IDENTITY .1.3.6.1.4.1.25506.8.35.5 |
hh3cLswL2InfMibObject OBJECT IDENTIFIER .1.3.6.1.4.1.25506.8.35.5.1 |
hh3cSlotPortMaxMax ports of the slots.ro INTEGER .1.3.6.1.4.1.25506.8.35.5.1.1 |
hh3cSwitchPortMaxMax ports that this switch includes.ro INTEGER .1.3.6.1.4.1.25506.8.35.5.1.2 |
hh3cifVLANTrunkStatusTableGvrp attributes on the VlanTrunk port. SEQUENCE OF Hh3cIfVLANTrunkStatusEntry .1.3.6.1.4.1.25506.8.35.5.1.3 |
hh3cifVLANTrunkStatusEntryGvrp attributes on the VlanTrunk port. Hh3cIfVLANTrunkStatusEntry .1.3.6.1.4.1.25506.8.35.5.1.3.1 |
hh3cifVLANTrunkIndexIndex number of the VLANTrunk interface.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.25506.8.35.5.1.3.1.1 |
hh3cifVLANTrunkGvrpRegistrationGVRP registration information normal: This is the default configuration. Allow create, register and unregister vlans dynamiclly at this port. fixed: Aallow create and register vlan manually at this port. Prevent from unregistering vlans or registering known vlans of this port at another trunk port. forbidden: Unregister all vlans but vlan 1, forbid to create or register any other vlans at this port.rw Enumeration .1.3.6.1.4.1.25506.8.35.5.1.3.1.2 |
hh3cifVLANTrunkPassListLowEach octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each actually passed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is actually passed in the set of VLANs; the VLAN is not actually passed if its bit has a value of '0'.ro OCTET STRING .1.3.6.1.4.1.25506.8.35.5.1.3.1.4 |
hh3cifVLANTrunkPassListHighEach octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each actually passed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is actually passed in the set of VLANs; the VLAN is not actually passed if its bit has a value of '0'.ro OCTET STRING .1.3.6.1.4.1.25506.8.35.5.1.3.1.5 |
hh3cifVLANTrunkAllowListLowEach octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 1 through 8, the second octet specifying VLANs 9 through 16, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each allowed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is allowed in the set of VLANs; the VLAN is not allowed if its bit has a value of '0'.rw OCTET STRING .1.3.6.1.4.1.25506.8.35.5.1.3.1.6 |
hh3cifVLANTrunkAllowListHighEach octet within this value specifies a set of eight VLANs, with the first octet specifying VLANs 2049 through 2056, the second octet specifying VLANs 2057 through 2064, etc. Within each octet, the most significant bit represents the highest numbered VLAN, and the least significant bit represents the lowest numbered VLAN. Thus, each allowed VLAN of the trunk port is represented by a single bit within the value of this object. If that bit has a value of '1' then that VLAN is allowed in the set of VLANs; the VLAN is not allowed if its bit has a value of '0'.rw OCTET STRING .1.3.6.1.4.1.25506.8.35.5.1.3.1.7 |
hh3cethernetTableEthernet port attribute table. SEQUENCE OF Hh3cEthernetEntry .1.3.6.1.4.1.25506.8.35.5.1.4 |
hh3cethernetEntryEntries of Ethernet port attribute table Hh3cEthernetEntry .1.3.6.1.4.1.25506.8.35.5.1.4.1 |
hh3cifEthernetDuplexEthernet interface mode.rw Enumeration .1.3.6.1.4.1.25506.8.35.5.1.4.1.3 |
hh3cifEthernetMTUMTU on the Ethernet interface.rw INTEGER .1.3.6.1.4.1.25506.8.35.5.1.4.1.4 |
hh3cifEthernetSpeedEthernet interface speed.rw Enumeration .1.3.6.1.4.1.25506.8.35.5.1.4.1.5 |
hh3cifEthernetMdiType of the line connected to the port. MDI-II (straight-through cable): 1 MDI-X (crossover cable): 2 MDI-AUTO (auto-sensing): 3rw Enumeration .1.3.6.1.4.1.25506.8.35.5.1.4.1.7 |
hh3cMaxMacLearnThe maximum number of MAC addresses that the port can learn. The value -1 means that the number of Mac addresses that the port can learn is unlimited.rw INTEGER(-1..2147483647) .1.3.6.1.4.1.25506.8.35.5.1.4.1.8 |
hh3cifMacAddressLearnThis object indicates if the interface is allowed to learn mac address. eanbled(1) means the interface can learn mac address, otherwise disabled(2) can be set.ro Enumeration .1.3.6.1.4.1.25506.8.35.5.1.4.1.9 |
hh3cifEthernetTestTest this interface. The actual testing will be different according to products. Read operation not supported.rw Enumeration .1.3.6.1.4.1.25506.8.35.5.1.4.1.10 |
hh3cifMacAddrLearnModeStatus indicates mac address learn mode of the interface. IVL(1) means independent VLAN learning. SVL means shared VLAN learning.ro Enumeration .1.3.6.1.4.1.25506.8.35.5.1.4.1.11 |
hh3cifEthernetFlowIntervalSet flow interval of the ethernet. The NMS should set value to integer which is a multiple of 5.rw INTEGER .1.3.6.1.4.1.25506.8.35.5.1.4.1.12 |
hh3cifEthernetIsolateIsolate group means that all ports in the same isolate group can not send and receive packets each other. Each octet within this value specifies a set of eight isolate groups, with the first octet specifying isolate groups 1 through 8, the second octet specifying isolate groups 9 through 16, etc. Within each octet, the leftmost bit is the first bit. the first bit represents the lowest numbered isolate group, and the last bit represents the highest numbered isolate group. one port can belong to more than one isolate group. Thus, each isolate group is represented by a single bit within the value of this object. If that bit has a value of '1', then that isolate group includes this port; the port is not included if its bit has a value of '0'. for example, the first octet is '10000100' means that the port is included in the isolate group 1 and isolate group 6.rw OCTET STRING .1.3.6.1.4.1.25506.8.35.5.1.4.1.13 |
hh3cifVlanVPNStatusVlan VPN enable status.rw Enumeration .1.3.6.1.4.1.25506.8.35.5.1.4.1.14 |
hh3cifVlanVPNUplinkStatusVlan VPN uplink status.rw Enumeration .1.3.6.1.4.1.25506.8.35.5.1.4.1.15 |
hh3cifVlanVPNTPIDPort based Vlan VPN TPID(Tag Protocol Indentifier), default value is 0x8100. Please refer to hh3cVlanVPNTPIDMode to get more information.rw Integer32 .1.3.6.1.4.1.25506.8.35.5.1.4.1.16 |
hh3cifIsolateGroupIDIsolate group identifier. Value zero means this interface does not belong to any isolate group.rw Integer32 .1.3.6.1.4.1.25506.8.35.5.1.4.1.17 |
hh3cifisUplinkPortEthernet uplink status, default value is 2.ro Enumeration .1.3.6.1.4.1.25506.8.35.5.1.4.1.18 |
hh3cifEthernetAutoSpeedMaskThis object specifies which kinds of speed mode can be negotiated. Each bit corresponds to a kind of speed mode. If the value of a bit is '1', it means the corresponding speed mode is negotiable on the port. Otherwise the negotiation for that kind of speed mode is not supported on this port. If there are several negotiable speed modes, all bits for them are '1'. For example, if the speed mode 's10M' and 's1000M' can be negotiable, the value of this object is 0xA0.ro SpeedModeFlag .1.3.6.1.4.1.25506.8.35.5.1.4.1.19 |
hh3cifEthernetAutoSpeedThis object indicates which kinds of speed mode are negotiable on this port. Only when a bit of hh3cifEthernetAutoSpeedMask is '1', the corresponding bit of this object can be set to '1', indicating the corresponding speed mode is negotiable. For example, if the value of hh3cifEthernetAutoSpeedMask is 0xA0, which indicates speed mode 's10M' and 's1000M' are negotiable, the possible value of this object should be one of the four values (0x00, 0x20, 0x80 and 0xA0). If the value of hh3cifEthernetSpeed is not 'auto', the value of this object is insignificant and should be ignored. The value length of this object should be as long as that of hh3cifEthernetAutoSpeedMask.rw SpeedModeFlag .1.3.6.1.4.1.25506.8.35.5.1.4.1.20 |
hh3cIsolateGroupMaxMax isolate group that this device support, the value is zero means that the device does not support isolate group.ro Integer32 .1.3.6.1.4.1.25506.8.35.5.1.5 |
hh3cGlobalBroadcastMaxPpsThe global max packets per second. When it is set, the value of BroadcastMaxPps in all ports will be changed to that setting.rw INTEGER .1.3.6.1.4.1.25506.8.35.5.1.6 |
hh3cGlobalBroadcastMaxRatioThe global max-ratio of broadcast from 0 to 100 percent. When it is set, the value of BroadcastMaxRatio in all ports will be changed to that setting.rw INTEGER .1.3.6.1.4.1.25506.8.35.5.1.7 |
hh3cBpduTunnelStatusBpdu tunnel enable status.rw Enumeration .1.3.6.1.4.1.25506.8.35.5.1.8 |
hh3cVlanVPNTPIDModeVlan VPN TPID mode. The value 'port-based' means VLAN VPN TPID value would be set based on port via hh3cifVlanVPNTPID. In this situation, hh3cVlanVPNTPID is meaningless and always return 0x8100. The value 'global' means VLAN VPN TPID value should be set globally via hh3cVlanVPNTPID. In this situation, hh3cifVlanVPNTPID in hh3cethernetTable has the same value with hh3cVlanVPNTPID.ro Enumeration .1.3.6.1.4.1.25506.8.35.5.1.9 |
hh3cVlanVPNTPIDGlobal Vlan VPN TPID(Tag Protocol Indentifier), default value is 0x8100.rw Integer32 .1.3.6.1.4.1.25506.8.35.5.1.10 |
hh3cPortIsolateGroupTableIsolate Group attribute table. SEQUENCE OF Hh3cPortIsolateGroupEntry .1.3.6.1.4.1.25506.8.35.5.1.11 |
hh3cPortIsolateGroupEntryThe entry of hh3cPortIsolateGroupTable. Hh3cPortIsolateGroupEntry .1.3.6.1.4.1.25506.8.35.5.1.11.1 |
hh3cPortIsolateGroupIndexPort isolate group identifier. The index of the hh3cPortIsolateGroupTable. The value ranges from 1 to the limit of isolate group quantity. Integer32 .1.3.6.1.4.1.25506.8.35.5.1.11.1.1 |
hh3cPortIsolateUplinkIfIndexIndex number of the uplink interface.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.25506.8.35.5.1.11.1.2 |
hh3cPortIsolateGroupRowStatusCurrent operation status of the row.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.8.35.5.1.11.1.3 |
hh3cPortIsolateGroupDescriptionPort isolate group description, default value is zero-length string.rw DisplayString .1.3.6.1.4.1.25506.8.35.5.1.11.1.4 |
hh3cMaxMacLearnRangeThe maximum number of MAC address that the port supports.ro Integer32 .1.3.6.1.4.1.25506.8.35.5.1.12 |
hh3cifPortProtocolStatTableThis table contains objects of port statistics information based on IPv4 and IPv6 protocols. SEQUENCE OF Hh3cifPortProtocolStatEntry .1.3.6.1.4.1.25506.8.35.5.1.13 |
hh3cifPortProtocolStatEntryThe entry of hh3cifPortProtocolStatTable. Hh3cifPortProtocolStatEntry .1.3.6.1.4.1.25506.8.35.5.1.13.1 |
hh3cifIPv4InOctetsNumber of octets based on IPv4 received on the interface.ro Counter64 .1.3.6.1.4.1.25506.8.35.5.1.13.1.1 |
hh3cifIPv4InUcastPktsNumber of unicast packets based on IPv4 received on the interface.ro Counter64 .1.3.6.1.4.1.25506.8.35.5.1.13.1.2 |
hh3cifIPv4InMultiPktsNumber of multicast packets based on IPv4 received on the interface.ro Counter64 .1.3.6.1.4.1.25506.8.35.5.1.13.1.3 |
hh3cifIPv4InBroadcastPktsNumber of broadcast packets based on IPv4 received on the interface.ro Counter64 .1.3.6.1.4.1.25506.8.35.5.1.13.1.4 |
hh3cifIPv4InDiscardsNumber of discard packets based on IPv4 received on the interface.ro Counter64 .1.3.6.1.4.1.25506.8.35.5.1.13.1.5 |
hh3cifIPv4InErrorsNumber of error packets based on IPv4 received on the interface.ro Counter64 .1.3.6.1.4.1.25506.8.35.5.1.13.1.6 |
hh3cifIPv4OutOctetsNumber of octets based on IPv4 transmitted out of the interface.ro Counter64 .1.3.6.1.4.1.25506.8.35.5.1.13.1.7 |
hh3cifIPv4OutUcastPktsNumber of unicast packets based on IPv4 transmitted out of the interface.ro Counter64 .1.3.6.1.4.1.25506.8.35.5.1.13.1.8 |
hh3cifIPv4OutMultiPktsNumber of multicast packets based on IPv4 transmitted out of the interface.ro Counter64 .1.3.6.1.4.1.25506.8.35.5.1.13.1.9 |
hh3cifIPv4OutBroadcastPktsNumber of broadcast packets based on IPv4 transmitted out of the interface.ro Counter64 .1.3.6.1.4.1.25506.8.35.5.1.13.1.10 |
hh3cifIPv4OutDiscardsNumber of discard packets based on IPv4 transmitted out of the interface.ro Counter64 .1.3.6.1.4.1.25506.8.35.5.1.13.1.11 |
hh3cifIPv4OutErrorsNumber of error packets based on IPv4 transmitted out of the interface.ro Counter64 .1.3.6.1.4.1.25506.8.35.5.1.13.1.12 |
hh3cifIPv6InOctetsNumber of octets based on IPv6 received on the interface.ro Counter64 .1.3.6.1.4.1.25506.8.35.5.1.13.1.13 |
hh3cifIPv6InUcastPktsNumber of unicast packets based on IPv6 received on the interface.ro Counter64 .1.3.6.1.4.1.25506.8.35.5.1.13.1.14 |
hh3cifIPv6InMultiPktsNumber of multicast packets based on IPv6 received on the interface.ro Counter64 .1.3.6.1.4.1.25506.8.35.5.1.13.1.15 |
hh3cifIPv6InAnycastPktsNumber of anycast packets based on IPv6 received on the interface.ro Counter64 .1.3.6.1.4.1.25506.8.35.5.1.13.1.16 |
hh3cifIPv6InDiscardsNumber of discard packets based on IPv6 received on the interface.ro Counter64 .1.3.6.1.4.1.25506.8.35.5.1.13.1.17 |
hh3cifIPv6InErrorsNumber of error packets based on IPv6 received on the interface.ro Counter64 .1.3.6.1.4.1.25506.8.35.5.1.13.1.18 |
hh3cifIPv6OutOctetsNumber of octets based on IPv6 transmitted of the interface.ro Counter64 .1.3.6.1.4.1.25506.8.35.5.1.13.1.19 |
hh3cifIPv6OutUcastPktsNumber of unicast packets based on IPv6 transmitted out of the interface.ro Counter64 .1.3.6.1.4.1.25506.8.35.5.1.13.1.20 |
hh3cifIPv6OutMultiPktsNumber of multicast packets based on IPv6 transmitted out of the interface.ro Counter64 .1.3.6.1.4.1.25506.8.35.5.1.13.1.21 |
hh3cifIPv6OutAnycastPktsNumber of anycast packets based on IPv6 transmitted out of the interface.ro Counter64 .1.3.6.1.4.1.25506.8.35.5.1.13.1.22 |
hh3cifIPv6OutDiscardsNumber of discard packets based on IPv6 transmitted out of the interface.ro Counter64 .1.3.6.1.4.1.25506.8.35.5.1.13.1.23 |
hh3cifIPv6OutErrorsNumber of error packets based on IPv6 transmitted out of the interface.ro Counter64 .1.3.6.1.4.1.25506.8.35.5.1.13.1.24 |