HH3C-LswMSTP-MIB
This MIB defines objects for managing MSTP.
Main OID:
hh3cdot1sMstp.1.3.6.1.4.1.25506.8.35.14
83
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
83 total| Object Name |
|---|
hh3cdot1sMstpThis MIB defines objects for managing MSTP. MODULE-IDENTITY .1.3.6.1.4.1.25506.8.35.14 |
hh3cMstpEventsV2Definition point for Mstp notifications. OBJECT IDENTIFIER .1.3.6.1.4.1.25506.8.35.14.0 |
hh3cPortMstiStateForwardingThe SNMP trap that is generated when a port turns into forwarding state form other state. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.8.35.14.0.1 |
hh3cPortMstiStateDiscardingThe SNMP trap that is generated when a port turns into discarding state form forwarding state. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.8.35.14.0.2 |
hh3cBridgeLostRootPrimaryThe SNMP trap that is generated when the bridge is no longer the root bridge of the instance. Another switch with higher priority has already been the root bridge of the instance. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.8.35.14.0.3 |
hh3cPortMstiRootGuardedThe SNMP trap that is generated when a root-guard port receives a superior message on the relevant instance. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.8.35.14.0.4 |
hh3cPortMstiBpduGuardedThe SNMP trap is generated when an edged port of the BPDU-guard device receives a BPDU. If the designated bridge ID can't be obtained from the BPDU, the designated bridge ID will be zero. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.8.35.14.0.5 |
hh3cPortMstiLoopGuardedThe SNMP trap that is generated when an Alternate-Port or Root-Port is aged out. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.8.35.14.0.6 |
hh3cMstiNewRootThe SNMP trap is generated when the sending device becomes the new root of the spanning tree. The first root bridge ID means the old root bridge ID, and the second one means the new root bridge ID. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.8.35.14.0.7 |
hh3cPortPvstBpduProtectionThe SNMP trap is generated when a PVST BPDU is received on an MSTP port that is enabled with the PVST protection feature. If the designated bridge ID can't be obtained from the BPDU, the designated bridge ID will be zero. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.8.35.14.0.8 |
hh3cdot1sStpStatusWhether the Bridge MSTP is enabled.rw EnabledStatus .1.3.6.1.4.1.25506.8.35.14.1 |
hh3cdot1sStpForceVersionThe mode of this Bridge spanning-tree protocol.rw Enumeration .1.3.6.1.4.1.25506.8.35.14.2 |
hh3cdot1sStpDiameterThe diameter of Bridge.rw Integer32 .1.3.6.1.4.1.25506.8.35.14.3 |
hh3cdot1sMstBridgeMaxHopsThe maximum value of the Bridge hops.rw Integer32 .1.3.6.1.4.1.25506.8.35.14.4 |
hh3cdot1sMstMasterBridgeIDThe Bridge Identifier of the current Master Bridge.ro BridgeId .1.3.6.1.4.1.25506.8.35.14.5 |
hh3cdot1sMstMasterPathCostThe CIST path cost from the transmitting Bridge to the Master Bridge.ro Integer32 .1.3.6.1.4.1.25506.8.35.14.6 |
hh3cdot1sMstBpduGuardWhether the Bridge BPDU Guard function is enabled. If the function is enabled, the port will shutdown when received BPDU and the port is configured as portfast.rw EnabledStatus .1.3.6.1.4.1.25506.8.35.14.7 |
hh3cdot1sMstAdminFormatSelectorThe administrative Configuration Identifier Format Selector in use by the Bridge. This has a value of 0 indicate the format specified in the Standard of IEEE 802.1s.rw Integer32 .1.3.6.1.4.1.25506.8.35.14.8 |
hh3cdot1sMstAdminRegionNameThis MSTP administrative region name.rw OCTET STRING .1.3.6.1.4.1.25506.8.35.14.9 |
hh3cdot1sMstAdminRevisionLevelThis MSTP administrative revision level.rw Integer32 .1.3.6.1.4.1.25506.8.35.14.10 |
hh3cdot1sMstOperFormatSelectorThe operative Configuration Identifier Format Selector in use by the Bridge. This has a value of 0 indicate the format specified in the Standard of IEEE 802.1s.ro Integer32 .1.3.6.1.4.1.25506.8.35.14.11 |
hh3cdot1sMstOperRegionNameThis MSTP operative region name.ro OCTET STRING( SIZE .1.3.6.1.4.1.25506.8.35.14.12 |
hh3cdot1sMstOperRevisionLevelThis MSTP operative revision level.ro Integer32 .1.3.6.1.4.1.25506.8.35.14.13 |
hh3cdot1sMstOperConfigDigestThis MSTP Region's Configuration Digest Signature Key.ro OCTET STRING .1.3.6.1.4.1.25506.8.35.14.14 |
hh3cdot1sMstRegionConfActiveActive the region configuration.rw Enumeration .1.3.6.1.4.1.25506.8.35.14.15 |
hh3cdot1sMstDefaultVlanAlloSet default configuration about VLAN allocation and all VLANs are mapped to CIST.rw Enumeration .1.3.6.1.4.1.25506.8.35.14.16 |
hh3cdot1sMstDefaultRegionNameSet default region name.rw Enumeration .1.3.6.1.4.1.25506.8.35.14.17 |
hh3cdot1sVIDAllocationTableMSTP VLAN-to-instance mapping table. SEQUENCE OF Hh3cdot1sVIDAllocationEntry .1.3.6.1.4.1.25506.8.35.14.18 |
hh3cdot1sVIDAllocationEntryMSTP VLAN-to-instance mapping table entry. Hh3cdot1sVIDAllocationEntry .1.3.6.1.4.1.25506.8.35.14.18.1 |
hh3cdot1sMstVIDVLAN Identifierro Integer32 .1.3.6.1.4.1.25506.8.35.14.18.1.1 |
hh3cdot1sAdminMstIDAdministrative Multiple spanning-tree instance Identifier.rw Integer32 .1.3.6.1.4.1.25506.8.35.14.18.1.2 |
hh3cdot1sOperMstIDOperative Multiple spanning-tree instance Identifier.ro Integer32 .1.3.6.1.4.1.25506.8.35.14.18.1.3 |
hh3cdot1sInstanceTableMSTI table. SEQUENCE OF Hh3cdot1sInstanceEntry .1.3.6.1.4.1.25506.8.35.14.19 |
hh3cdot1sInstanceEntryMSTI table entry. Hh3cdot1sInstanceEntry .1.3.6.1.4.1.25506.8.35.14.19.1 |
hh3cdot1sInstanceIDMultiple spanning-tree instance Identifierro Integer32 .1.3.6.1.4.1.25506.8.35.14.19.1.1 |
hh3cdot1sMstiBridgeIDThe Bridge Identifier for the spanning tree instance identified by MSTIDro BridgeId .1.3.6.1.4.1.25506.8.35.14.19.1.2 |
hh3cdot1sMstiBridgePriorityThe Bridge Priority for the spanning tree instance identified by MSTID. Step of 4096rw Integer32 .1.3.6.1.4.1.25506.8.35.14.19.1.3 |
hh3cdot1sMstiDesignedRootThe Bridge Identifier of the Root Bridge for the spanning tree instance identified by MSTIDro BridgeId .1.3.6.1.4.1.25506.8.35.14.19.1.4 |
hh3cdot1sMstiRootPathCostThe path cost from the transmitting Bridge to the Root Bridge for the spanning tree instance identified by MSTIDro Integer32 .1.3.6.1.4.1.25506.8.35.14.19.1.5 |
hh3cdot1sMstiRootPortThe Root Port for the spanning tree instance identified by the MSTIDro Integer32 .1.3.6.1.4.1.25506.8.35.14.19.1.6 |
hh3cdot1sMstiRootTypeConfig this Bridge as a primary root or secondary root and or cancel the root for this spanning tree instance identified by MSTIDrw Enumeration .1.3.6.1.4.1.25506.8.35.14.19.1.7 |
hh3cdot1sMstiRemainingHopsThe remaining hops of the spanning tree instance identified by MSTIDro Integer32 .1.3.6.1.4.1.25506.8.35.14.19.1.8 |
hh3cdot1sMstiAdminMappedVlanListLowThe lower part of administrative Vlan list mapped to the spanning tree instance identified by MSTIDro OCTET STRING .1.3.6.1.4.1.25506.8.35.14.19.1.9 |
hh3cdot1sMstiAdminMappedVlanListHighThe higher part of administrative Vlan list mapped to the spanning tree instance identified by MSTIDro OCTET STRING .1.3.6.1.4.1.25506.8.35.14.19.1.10 |
hh3cdot1sMstiOperMappedVlanListLowThe lower part of operative Vlan list mapped to the spanning tree instance identified by MSTIDro OCTET STRING .1.3.6.1.4.1.25506.8.35.14.19.1.11 |
hh3cdot1sMstiOperMappedVlanListHighThe higher part of operative Vlan list mapped to the spanning tree instance identified by MSTIDro OCTET STRING .1.3.6.1.4.1.25506.8.35.14.19.1.12 |
hh3cdot1sPortTableMSTP interface table. SEQUENCE OF Hh3cdot1sPortEntry .1.3.6.1.4.1.25506.8.35.14.20 |
hh3cdot1sPortEntryMSTP interface table entry. Hh3cdot1sPortEntry .1.3.6.1.4.1.25506.8.35.14.20.1 |
hh3cdot1sMstiPortIndexThe index of the Bridge Portro Integer32 .1.3.6.1.4.1.25506.8.35.14.20.1.1 |
hh3cdot1sMstiStateThe current state of the Port (i.e., Disabled, Discarding , Learning, Forwarding)ro Enumeration .1.3.6.1.4.1.25506.8.35.14.20.1.2 |
hh3cdot1sMstiPortPriorityThe value of the priority field which is contained in the first (in network byte order) four bits of the (2 octet long) Port ID. The other octet of the Port ID is given by the value of mstiPortIndex. And step of 16rw Integer32 .1.3.6.1.4.1.25506.8.35.14.20.1.3 |
hh3cdot1sMstiPathCostThe contribution of this port to the path cost of paths towards the spanning tree root which include this port. The range of path cost is 1..65535 for 802.1d standard, is 1..200000000 for 802.1t standard, and is 1..200000 for the legacy standard.rw Integer32 .1.3.6.1.4.1.25506.8.35.14.20.1.4 |
hh3cdot1sMstiDesignatedRootThe Bridge Identifier of the Root Bridge for the port of the Spanning Tree instance identified by the MSTIDro BridgeId .1.3.6.1.4.1.25506.8.35.14.20.1.5 |
hh3cdot1sMstiDesignatedCostThe path cost of the Designated Port of the segment connected to this port. This value is compared to the Root Path Cost field in received bridge PDUs.ro Integer32 .1.3.6.1.4.1.25506.8.35.14.20.1.6 |
hh3cdot1sMstiDesignatedBridgeThe Bridge Identifier of the bridge which this port considers to be the Designated Bridge for this port's segment.ro BridgeId .1.3.6.1.4.1.25506.8.35.14.20.1.7 |
hh3cdot1sMstiDesignatedPortThe Port Identifier of the port on the Designated Bridge for this port's segment.ro OCTET STRING .1.3.6.1.4.1.25506.8.35.14.20.1.8 |
hh3cdot1sMstiMasterBridgeIDThe Bridge Identifier of the current Master Bridge. Effective in CIST.ro BridgeId .1.3.6.1.4.1.25506.8.35.14.20.1.9 |
hh3cdot1sMstiMasterPortCostThe CIST path cost from the transmitting Bridge to the Master Bridge. Effective in CIST.ro Integer32 .1.3.6.1.4.1.25506.8.35.14.20.1.10 |
hh3cdot1sMstiStpPortEdgeportWhether the port fast is enabled. Effective in CIST.rw EnabledStatus .1.3.6.1.4.1.25506.8.35.14.20.1.11 |
hh3cdot1sMstiStpPortPointToPointWhether the port connects the point to point link. Effective in CIST.rw Enumeration .1.3.6.1.4.1.25506.8.35.14.20.1.12 |
hh3cdot1sMstiStpMcheckForcing the state machine to send MST BPDUs in this manner can be used to test whether all legacy Bridges on a given LAN have been removed. Effective in CIST.rw Enumeration .1.3.6.1.4.1.25506.8.35.14.20.1.13 |
hh3cdot1sMstiStpTransLimitThe value used by the Port Transmit state machine to limit the maximum transmission rate. Effective in CIST.rw Integer32 .1.3.6.1.4.1.25506.8.35.14.20.1.14 |
hh3cdot1sMstiStpRXStpBPDUThe number of received Config BPDU. Effective in CIST.ro Counter32 .1.3.6.1.4.1.25506.8.35.14.20.1.15 |
hh3cdot1sMstiStpTXStpBPDUThe number of transmitted Config BPDU. Effective in CIST.ro Counter32 .1.3.6.1.4.1.25506.8.35.14.20.1.16 |
hh3cdot1sMstiStpRXTCNBPDUThe number of received TCN BPDU. Effective in CIST.ro Counter32 .1.3.6.1.4.1.25506.8.35.14.20.1.17 |
hh3cdot1sMstiStpTXTCNBPDUThe number of transmitted TCN BPDU. Effective in CIST.ro Counter32 .1.3.6.1.4.1.25506.8.35.14.20.1.18 |
hh3cdot1sMstiStpRXRSTPBPDUThe number of received RST BPDU. Effective in CIST.ro Counter32 .1.3.6.1.4.1.25506.8.35.14.20.1.19 |
hh3cdot1sMstiStpTXRSTPBPDUThe number of transmitted RST BPDU. Effective in CIST.ro Counter32 .1.3.6.1.4.1.25506.8.35.14.20.1.20 |
hh3cdot1sMstiStpRXMSTPBPDUThe number of received MST BPDU. Effective in CIST.ro Counter32 .1.3.6.1.4.1.25506.8.35.14.20.1.21 |
hh3cdot1sMstiStpTXMSTPBPDUThe number of transmitted MST BPDU. Effective in CIST.ro Counter32 .1.3.6.1.4.1.25506.8.35.14.20.1.22 |
hh3cdot1sMstiStpClearStatisticsClear the spanning tree statistic. Effective in CIST.rw Enumeration .1.3.6.1.4.1.25506.8.35.14.20.1.23 |
hh3cdot1sMstiStpDefaultPortCostSet default Port path cost.rw Enumeration .1.3.6.1.4.1.25506.8.35.14.20.1.24 |
hh3cdot1sMstiStpStatusWhether the spanning tree protocol is enabled on this port. Effective in CIST.rw EnabledStatus .1.3.6.1.4.1.25506.8.35.14.20.1.25 |
hh3cdot1sMstiPortRootGuardWhether the root guard is enabled. Effective in CIST.rw EnabledStatus .1.3.6.1.4.1.25506.8.35.14.20.1.26 |
hh3cdot1sMstiPortLoopGuardWhether the loop protection is enabled. Effective in CIST.rw EnabledStatus .1.3.6.1.4.1.25506.8.35.14.20.1.27 |
hh3cdot1sMstiStpPortSendingBPDUTypeType of BPDU which the port is sending.ro Enumeration .1.3.6.1.4.1.25506.8.35.14.20.1.28 |
hh3cdot1sMstiStpOperPortPointToPointThis object indicates whether the port has connected to a point-to-point link or not. The value of the node is an operative value. The administrative value can be read from the node hh3cdot1sMstiStpPortPointToPoint. If the value of hh3cdot1sMstiStpPortPointToPoint is auto, the value of this node should be calculated by the network topology of this port. If the value of hh3cdot1sMstiStpPortPointToPoint is forceFalse, the value of this node is false. If the value of hh3cdot1sMstiStpPortPointToPoint is forceTrue, the value of this node is true.ro Enumeration .1.3.6.1.4.1.25506.8.35.14.20.1.29 |
hh3cdot1sMstiStpPortAdminBPDUFmtThe value of the node is an administrative value. Value legacy means that the MST BPDU format is forced to legacy. Value dot1s means that the MST BPDU format is forced to IEEE 802.1s. Value auto means that the format of MST BPDU sending on the port is determined by the MST BPDU that the port has received. Effective in CIST.rw Hh3cdot1sFormatStatus .1.3.6.1.4.1.25506.8.35.14.20.1.30 |
hh3cdot1sMstiStpPortOperBPDUFmtThe format of MST BPDU which the port is sending. Value legacy means that the format of MST BPDU sending on the port is legacy. Value dot1s means that the format of MST BPDU sending on the port is IEEE 802.1s. Effective in CIST.ro Hh3cdot1sFormatStatus .1.3.6.1.4.1.25506.8.35.14.20.1.31 |
hh3cdot1sMstiStpPortRoleRestrictionWhether the role-restriction is enabled. Effective in CIST. The role-restriction causes the port not to be selected as root port for the CIST or any MSTI.rw EnabledStatus .1.3.6.1.4.1.25506.8.35.14.20.1.32 |
hh3cdot1sMstiStpPortTcRestrictionWhether the tc-restriction is enabled. Effective in CIST. The tc-restriction causes the port not to propagate topology changes to other ports.rw EnabledStatus .1.3.6.1.4.1.25506.8.35.14.20.1.33 |
hh3cdot1sMstiStpPortDisputedWhether the port is disputed for the CIST or MSTI.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.8.35.14.20.1.34 |
hh3cdot1sStpPathCostStandardPath cost standard of the bridge. Value dot1d-1998 is IEEE 802.1d standard in 1998, value dot1t is IEEE 802.1t standard, and value legacy is a private legacy standard.rw Enumeration .1.3.6.1.4.1.25506.8.35.14.21 |