HH3C-EVI-MIB
This MIB contains the objects for managing Ethernet Virtual Interconnect(EVI).
Main OID:
hh3cEvi.1.3.6.1.4.1.25506.2.132
97
Objects
Active
Status
7
Dependencies
Imported Objects
Objects
97 total| Object Name |
|---|
hh3cEviThis MIB contains the objects for managing Ethernet Virtual
Interconnect(EVI). MODULE-IDENTITY .1.3.6.1.4.1.25506.2.132 |
hh3cEviNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.132.0 |
hh3cEviNewDedNotifies that a new DED has been elected. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.132.0.1 |
hh3cEviSiteEDTopoChangeNotifies that the EVI network topology has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.132.0.2 |
hh3cEviEDLinkDisconnectNotifies that all the EVI links on a tunnel are down. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.132.0.3 |
hh3cEviObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.132.1 |
hh3cEviBase OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.132.1.1 |
hh3cEviDesignatedVlanThe designated VLAN is used for edge devices on
a multihomed site to exchange EVI IS-IS hello
packets for DED election and extended-VLAN
assignment.rw VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.25506.2.132.1.1.1 |
hh3cEviSiteIDSite ID. The edge devices in the same site must have
the same site ID.rw Integer32 .1.3.6.1.4.1.25506.2.132.1.1.2 |
hh3cEviIf OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.132.1.2 |
hh3cEviIfExtendVlanTableA table that contains extended VLAN entries. A site
extends extended VLANs to remote sites over an EVI tunnel. SEQUENCE OF Hh3cEviIfExtendVlanEntry .1.3.6.1.4.1.25506.2.132.1.2.1 |
hh3cEviIfExtendVlanEntryDetailed information about each extended VLAN. Hh3cEviIfExtendVlanEntry .1.3.6.1.4.1.25506.2.132.1.2.1.1 |
hh3cEviIfExtendVlanIndexEach VLAN index specifies a VLAN ID in the range of
1 to 4094. VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.25506.2.132.1.2.1.1.1 |
hh3cEviIfExtendVlanLAVLocal Active VLANs (LAVs), which are active VLANs on the EVI tunnel
interface. The interface can extend only active VLANs to
remote sites.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.132.1.2.1.1.2 |
hh3cEviIfExtendVlanRowStatusEntry status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.132.1.2.1.1.3 |
hh3cEviIfVlanMappingTableVLAN mapping table on the interface. SEQUENCE OF Hh3cEviIfVlanMappingEntry .1.3.6.1.4.1.25506.2.132.1.2.2 |
hh3cEviIfVlanMappingEntryDetailed information about each VLAN mapping. Hh3cEviIfVlanMappingEntry .1.3.6.1.4.1.25506.2.132.1.2.2.1 |
hh3cEviIfVlanMappingSiteIdSite ID of the interface on which the VLAN mapping is
configured. If '0' is specified, the operation applies
to all sites. Integer32 .1.3.6.1.4.1.25506.2.132.1.2.2.1.1 |
hh3cEviIfVlanMappingSrcLocal VLAN ID in the mapping. VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.25506.2.132.1.2.2.1.2 |
hh3cEviIfVlanMappingDstRemote VLAN ID in the mapping. VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.25506.2.132.1.2.2.1.3 |
hh3cEviIfVlanMappingRowStatusEntry status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.132.1.2.2.1.4 |
hh3cEviIfAttributeTableA table that contains EVI tunnel attribute entries. SEQUENCE OF Hh3cEviIfAttributeEntry .1.3.6.1.4.1.25506.2.132.1.2.3 |
hh3cEviIfAttributeEntryDetailed information about the attributes of each EVI tunnel. Hh3cEviIfAttributeEntry .1.3.6.1.4.1.25506.2.132.1.2.3.1 |
hh3cEviIfFloodingModeState of the EVI flooding function. The function is enabled
if the value is set to true.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.132.1.2.3.1.1 |
hh3cEviIfARPSuppressionState of the ARP flooding suppression function. The
function is enabled if the value is set to true.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.132.1.2.3.1.2 |
hh3cEviIfFloodingMacTableA table that contains MAC addresses configured
for selective flooding. SEQUENCE OF Hh3cEviIfFloodingMacEntry .1.3.6.1.4.1.25506.2.132.1.2.4 |
hh3cEviIfFloodingMacEntryDetailed information about each MAC address
used for EVI selective flooding. Hh3cEviIfFloodingMacEntry .1.3.6.1.4.1.25506.2.132.1.2.4.1 |
hh3cEviIfFloodingMacAddressMAC address used for EVI selective flooding. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.25506.2.132.1.2.4.1.1 |
hh3cEviIfFloodMacVlanIndexThe VLAN that contains the MAC address. VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.25506.2.132.1.2.4.1.2 |
hh3cEviIfFloodingMacRowStatusState of the MAC address entry. You can use this
object to create or delete entries. Deleting entries
does not delete this object.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.132.1.2.4.1.3 |
hh3cEviMac OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.132.1.3 |
hh3cEviMacCountTableEVI MAC statistics table. The table contains MAC entry
counts sorted by MAC address types, including local MACs, local
MAC conflicts, remote MACs, and remote MAC conflicts. SEQUENCE OF Hh3cEviMacCountEntry .1.3.6.1.4.1.25506.2.132.1.3.1 |
hh3cEviMacCountEntryEVI MAC entry counts. Hh3cEviMacCountEntry .1.3.6.1.4.1.25506.2.132.1.3.1.1 |
hh3cEviMacLocalMacsNumber of local MACs.ro Counter32 .1.3.6.1.4.1.25506.2.132.1.3.1.1.1 |
hh3cEviMacLocalConflictsNumber of local MACs that conflict with remote
MACs.ro Counter32 .1.3.6.1.4.1.25506.2.132.1.3.1.1.2 |
hh3cEviMacRemoteMacsNumber of remote MACs received from remote edge devices.ro Counter32 .1.3.6.1.4.1.25506.2.132.1.3.1.1.3 |
hh3cEviMacRemoteConflictsNumber of remote MACs that conflict with local MACs.ro Counter32 .1.3.6.1.4.1.25506.2.132.1.3.1.1.4 |
hh3cEviMacLocalTableMAC address table that only contains MAC addresses at
the site. SEQUENCE OF Hh3cEviMacLocalEntry .1.3.6.1.4.1.25506.2.132.1.3.2 |
hh3cEviMacLocalEntryDetailed informaiton about each local MAC entry. Hh3cEviMacLocalEntry .1.3.6.1.4.1.25506.2.132.1.3.2.1 |
hh3cEviMacLocalVlanVLANs that contain the local MACs. VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.25506.2.132.1.3.2.1.1 |
hh3cEviMacLocalMacAddrLocal MAC addresses. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.25506.2.132.1.3.2.1.2 |
hh3cEviMacLocalMacTypeMAC address types, including: dynamic MACs, static MACs,
and flood MACs (MACs configured for selective flooding).ro Hh3cEviMacType .1.3.6.1.4.1.25506.2.132.1.3.2.1.3 |
hh3cEviMacLocalConflictWhether the MAC conflicts with any remote MAC.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.132.1.3.2.1.4 |
hh3cEviMacLocalFilteredWhether the MAC is filtered.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.132.1.3.2.1.5 |
hh3cEviMacRemoteTableA table contains MAC addresses received from remote edge devices. SEQUENCE OF Hh3cEviMacRemoteEntry .1.3.6.1.4.1.25506.2.132.1.3.3 |
hh3cEviMacRemoteEntryDetailed information about each remote MAC. Hh3cEviMacRemoteEntry .1.3.6.1.4.1.25506.2.132.1.3.3.1 |
hh3cEviMacRemoteVlanVLANs that contain remote MAC addresses. VlanId (Q-BRIDGE-MIB) .1.3.6.1.4.1.25506.2.132.1.3.3.1.1 |
hh3cEviMacRemoteMacAddrRemote MAC address. MacAddress (SNMPv2-TC) .1.3.6.1.4.1.25506.2.132.1.3.3.1.2 |
hh3cEviMacRemoteMacEffectWhether the MAC can be used for forwarding traffic.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.132.1.3.3.1.3 |
hh3cEviMacRemoteConflictThe remote MAC conflicts with a local MAC.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.132.1.3.3.1.4 |
hh3cEviProcess OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.132.1.4 |
hh3cEviProcessPolicyTableA table that contains routing policy information for each
EVI IS-IS process. SEQUENCE OF Hh3cEviProcessPolicyEntry .1.3.6.1.4.1.25506.2.132.1.4.1 |
hh3cEviProcessPolicyEntryDetailed information about the routing policy for each
EVI IS-IS process. Hh3cEviProcessPolicyEntry .1.3.6.1.4.1.25506.2.132.1.4.1.1 |
hh3cEviProcessIdEVI IS-IS process ID.ro Unsigned32 (0 .. 1023) .1.3.6.1.4.1.25506.2.132.1.4.1.1.1 |
hh3cEviProcessPolicyRouting policy for the EVI IS-IS process.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25506.2.132.1.4.1.1.2 |
hh3cEviProcessGrTableA table that contains graceful restart (GR) information. SEQUENCE OF Hh3cEviProcessGrEntry .1.3.6.1.4.1.25506.2.132.1.4.2 |
hh3cEviProcessGrEntryDetailed GR information for each EVI IS-IS process. Hh3cEviProcessGrEntry .1.3.6.1.4.1.25506.2.132.1.4.2.1 |
hh3cEviProcessGrEnableWhether the GR function is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.132.1.4.2.1.1 |
hh3cEviProcessGrIntervalEVI IS-IS GR interval in the range of 30 to 1800, in
seconds.rw Unsigned32 .1.3.6.1.4.1.25506.2.132.1.4.2.1.2 |
hh3cEviProcessVSysTableA table that contains virtual system entries. Virtual systems are
associated with EVI IS-IS processes. SEQUENCE OF Hh3cEviProcessVSysEntry .1.3.6.1.4.1.25506.2.132.1.4.3 |
hh3cEviProcessVSysEntryDetailed information about each vitual system. Hh3cEviProcessVSysEntry .1.3.6.1.4.1.25506.2.132.1.4.3.1 |
hh3cEviVirtualSysIdVirtual system ID in hexadecimal notation. The virtual
system ID must be unique in the EVI network. IsisSystemID (ISIS-MIB) .1.3.6.1.4.1.25506.2.132.1.4.3.1.1 |
hh3cEviVirtualSysRowStatusEntry status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.132.1.4.3.1.2 |
hh3cEviISIS OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.132.1.5 |
hh3cEviISISNbrSummaryTableEVI neighbor statistics table. SEQUENCE OF Hh3cEviISISNbrSummaryEntry .1.3.6.1.4.1.25506.2.132.1.5.1 |
hh3cEviISISNbrSummaryEntryEVI neighbor statistics table entries. The entries
contain the EVI neighbor summary for each EVI IS-IS
process. Hh3cEviISISNbrSummaryEntry .1.3.6.1.4.1.25506.2.132.1.5.1.1 |
hh3cEviISISNbrMaxMultiHomesThe maximum number of edge devices that the site
can contain.ro Unsigned32 .1.3.6.1.4.1.25506.2.132.1.5.1.1.1 |
hh3cEviISISNbrSiteNbrsThe count of neighbors that belong to the same site.ro Unsigned32 .1.3.6.1.4.1.25506.2.132.1.5.1.1.2 |
hh3cEviISISNbrLinkNbrsThe count of neighbors that are in remote sites.ro Unsigned32 .1.3.6.1.4.1.25506.2.132.1.5.1.1.3 |
hh3cEviISISNbrTableA table that contains generic information about all
neighbors. SEQUENCE OF Hh3cEviISISNbrEntry .1.3.6.1.4.1.25506.2.132.1.5.2 |
hh3cEviISISNbrEntryDetailed information about each neighbor of the edge
device. Hh3cEviISISNbrEntry .1.3.6.1.4.1.25506.2.132.1.5.2.1 |
hh3cEviISISNbrSysIdSystem ID of the neighbor.ro IsisSystemID (ISIS-MIB) .1.3.6.1.4.1.25506.2.132.1.5.2.1.1 |
hh3cEviISISNbrMacAddrMAC address of the neighbor.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.25506.2.132.1.5.2.1.2 |
hh3cEviISISNbrSiteIdSite ID of the neighbor.ro Integer32 .1.3.6.1.4.1.25506.2.132.1.5.2.1.3 |
hh3cEviISISNbrTransStatusState of EVI transport-facing links.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.132.1.5.2.1.4 |
hh3cEviEnable OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.132.1.6 |
hh3cEviEnableTableA table that contains all EVI-enabled neighboring ports of the edge device. SEQUENCE OF Hh3cEviEnableEntry .1.3.6.1.4.1.25506.2.132.1.6.1 |
hh3cEviEnableEntryDetailed information about each EVI-enabled port in the EVI
network. Hh3cEviEnableEntry .1.3.6.1.4.1.25506.2.132.1.6.1.1 |
hh3cEviEnableStatusEnd station service disable (trunk port) bit. When this bit
is set (true), all native frames received on the port and all
native frames that would have been sent on the port are
discarded.
The value of this object MUST be retained across
reinitializations of the management system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.132.1.6.1.1.1 |
hh3cEviNbr OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.132.1.7 |
hh3cEviNbrBaseTableA table that contains basic information about the EVI
Neighbor Discovery Protocol (ENDP). SEQUENCE OF Hh3cEviNbrBaseEntry .1.3.6.1.4.1.25506.2.132.1.7.1 |
hh3cEviNbrBaseEntryDetailed information about ENDP for each EVI tunnel. Hh3cEviNbrBaseEntry .1.3.6.1.4.1.25506.2.132.1.7.1.1 |
hh3cEviNbrSelfServerStatusIf the value is set to true, the EVI neighbor
discovery server (ENDS) is enabled. When you
enable ENDS on an EVI tunnel interface, an
EVI neighbor discovery client (ENDC) on the EVI tunnel
interface is also enabled automatically, with the source
address of the EVI tunnel as the server address.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.132.1.7.1.1.1 |
hh3cEviNbrAuthPasswordENDP authentication key. It is a zero-length string when being read.rw OCTET STRING .1.3.6.1.4.1.25506.2.132.1.7.1.1.2 |
hh3cEviNbrClientRegisterIntervalInterval at which the ENDCs on an EVI tunnel interface
update their registration with their ENDSs.rw Integer32 .1.3.6.1.4.1.25506.2.132.1.7.1.1.3 |
hh3cEviNbrRemoteServerTableA table that contains basic information about the
remote ENDSs. SEQUENCE OF Hh3cEviNbrRemoteServerEntry .1.3.6.1.4.1.25506.2.132.1.7.2 |
hh3cEviNbrRemoteServerEntryDetailed information about each remote ENDS. When you set
the address of a remote ENDS on an EVI tunnel interface,
an ENDC is enabled automatically on the EVI tunnel interface. Hh3cEviNbrRemoteServerEntry .1.3.6.1.4.1.25506.2.132.1.7.2.1 |
hh3cEviNbrRemoteServerTypeAddress type of the remote ENDS, including ipv4 and ipv6. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.132.1.7.2.1.1 |
hh3cEviNbrRemoteServerAddress of the remote ENDS. The address type is
specified by the hh3cEviNbrRemoteServerType object.
Address length (4 or 16 bytes) must be consistent with
the address type. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.132.1.7.2.1.2 |
hh3cEviNbrRemoteServerRowStatusEntry status. This object is used to create or delete
entries. Deleting entries does not delete this object.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.132.1.7.2.1.3 |
hh3cEviNbrTableA table that contains basic information about neighbors
discovered with ENDP. SEQUENCE OF Hh3cEviNbrEntry .1.3.6.1.4.1.25506.2.132.1.7.3 |
hh3cEviNbrEntryDetailed information about each EVI neighbor. Hh3cEviNbrEntry .1.3.6.1.4.1.25506.2.132.1.7.3.1 |
hh3cEviNbrAddressTypeAddress type of the neighbor, including ipv4 and ipv6. InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.132.1.7.3.1.1 |
hh3cEviNbrAddressAddress of the neighbor. The address type is specified by the
hh3cEviNbrAddressType object. Address length (4 or 16 bytes)
must be consistent with the address type. InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.25506.2.132.1.7.3.1.2 |
hh3cEviNbrSystemIDSystem ID of the neighbor.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.25506.2.132.1.7.3.1.3 |
hh3cEviNbrExpireTimeExpiration time of the neighbor.ro Integer32 .1.3.6.1.4.1.25506.2.132.1.7.3.1.4 |
hh3cEviNbrStatusState of the neighbor.ro Hh3cEviNeighborStatus .1.3.6.1.4.1.25506.2.132.1.7.3.1.5 |