HH3C-EOC-COMMON-MIB
The objects in this MIB module are used to manage and display common configuration between Ethernet Passive Optical Network (EOC) port which are based on the Ethernet in the First Mile (EFM) Passive Optical Network(PON) as defined in IEEE Draft P802.3ah/D3.0 clause 60, 64, 65.. and Ethernet Over Cable (EOC) which is based on HomePlug AV Specification.
Main OID:
hh3cEOCCommon.1.3.6.1.4.1.25506.2.83
136
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
136 total| Object Name |
|---|
hh3cEOCCommonThe objects in this MIB module are used to manage and
display common configuration between Ethernet Passive
Optical Network (EOC) port which are based on the Ethernet
in the First Mile (EFM) Passive Optical Network(PON) as
defined in IEEE Draft P802.3ah/D3.0 clause 60, 64, 65..
and Ethernet Over Cable (EOC) which is based on HomePlug
AV Specification. MODULE-IDENTITY .1.3.6.1.4.1.25506.2.83 |
hh3cEOCCommonSysMan OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.83.1 |
hh3cEOCCommonSysScalarObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.83.1.1 |
hh3cEOCCommonSysVersionEoc version. If the object length is
zero, it means the version is unknown.
The length is up to 1024.ro OCTET STRING .1.3.6.1.4.1.25506.2.83.1.1.1 |
hh3cEOCCommonUpLinkMacAddressEOC CLT's uplink device's mac address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.25506.2.83.1.1.2 |
hh3cEOCCommonCltMan OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.83.2 |
hh3cEOCCommonCltManTableThis table defines the primary parameters of the
CLT configuration. SEQUENCE OF Hh3cEOCCommonCltManEntry .1.3.6.1.4.1.25506.2.83.2.1 |
hh3cEOCCommonCltManEntryThe entry of the table hh3cEOCCommonCltManTable. Hh3cEOCCommonCltManEntry .1.3.6.1.4.1.25506.2.83.2.1.1 |
hh3cEOCCommonCltAutoAuthorizeThis value determines whether software performs
self-authorization for each Cable Network Unit(CNU)
registering to the network. Setting it to false
means for every CNU registering, software requires
external authorization, and until it's done the
CNU is not authenticated. True value means software
authorizes each CNU registering to the network
automatically.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.83.2.1.1.1 |
hh3cEOCCommonCltMaxAllowToAccessThis value determines how many CNU can be bound
in this CLT. If the number of CNU is more than this
value , then the rest of CNU should not be allow to
access.rw Integer32 .1.3.6.1.4.1.25506.2.83.2.1.1.2 |
hh3cEOCComCnuMan OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.83.3 |
hh3cEOCComCnuScalarObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.83.3.1 |
hh3cEOCComCnuMaxDownBWMinValThe lower limit of total-bandwidth which is confined to
hh3cEOCComCnuMaxDownBW.ro Integer32 .1.3.6.1.4.1.25506.2.83.3.1.1 |
hh3cEOCComCnuMaxDownBWMaxValThe upper limit of total-bandwidth which is confined to
hh3cEOCComCnuMaxDownBW.ro Integer32 .1.3.6.1.4.1.25506.2.83.3.1.2 |
hh3cEOCComCnuSlaHighPriBWMinValThe lower limit of high priority bandwidth which is confined to
hh3cEOCComCnuSlaHighPriBW.ro Integer32 .1.3.6.1.4.1.25506.2.83.3.1.3 |
hh3cEOCComCnuSlaHighPriBWMaxValThe upper limit of high priority bandwidth which is confined to
hh3cEOCComCnuSlaHighPriBW.ro Integer32 .1.3.6.1.4.1.25506.2.83.3.1.4 |
hh3cEOCComCnuMaxUpBWMinValThe lower limit of total-bandwidth which is confined to
hh3cEOCComCnuMaxUpBW.ro Integer32 .1.3.6.1.4.1.25506.2.83.3.1.5 |
hh3cEOCComCnuMaxUpBWMaxValThe upper limit of total-bandwidth which is confined to
hh3cEOCComCnuMaxUpBW.ro Integer32 .1.3.6.1.4.1.25506.2.83.3.1.6 |
hh3cEOCComCnuAttenThrAThe value of cnu's average attenuation good level thresholds.rw Integer32 .1.3.6.1.4.1.25506.2.83.3.1.7 |
hh3cEOCComCnuAttenThrBThe value of cnu's average attenuation normal level thresholds.rw Integer32 .1.3.6.1.4.1.25506.2.83.3.1.8 |
hh3cEOCComCnuRateDropThrThe value of cnu's Tx/Rx rate drop thresholds.rw Integer32 .1.3.6.1.4.1.25506.2.83.3.1.9 |
hh3cEOCComCnuSysManTableThis table implements the management of CNUs(Coax Network Unit). SEQUENCE OF Hh3cEOCComCnuSysManEntry .1.3.6.1.4.1.25506.2.83.3.2 |
hh3cEOCComCnuSysManEntryThe entry of the table hh3cEOCComCnuSysManTable. Hh3cEOCComCnuSysManEntry .1.3.6.1.4.1.25506.2.83.3.2.1 |
hh3cEOCComCnuCableIfindexThe index of cable port which uniquely identifies the cable
port of one device.ro Integer32 .1.3.6.1.4.1.25506.2.83.3.2.1.1 |
hh3cEOCComCnuDeviceTypeThe type of the EOC CNU(Coax Network Unit).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25506.2.83.3.2.1.2 |
hh3cEOCComCnuDeviceAliasEOC CNU's alias which display as the device's name,
it's recommended to set it uniquely and understandably.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25506.2.83.3.2.1.3 |
hh3cEOCComCnuDescrUser's description, including user's address,
name, telephone number and so on.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25506.2.83.3.2.1.4 |
hh3cEOCComCnuUpTimeThe time since the CNU last registered to the network.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.25506.2.83.3.2.1.5 |
hh3cEOCComCnuVLANTypeport vlan types.
hybrid (3) port can carry multiple VLANs.
If fabric function is supported, fabric(4) means the port is
a fabric port.rw Enumeration .1.3.6.1.4.1.25506.2.83.3.2.1.6 |
hh3cEOCComCnuPvidThe PVID, the VLAN ID assigned to untagged frames or
Priority-Tagged frames received on cable interface.rw Integer32 .1.3.6.1.4.1.25506.2.83.3.2.1.7 |
hh3cEOCComCnuVlanTagVLAN is set tagged or untagged on cable interface.rw Enumeration .1.3.6.1.4.1.25506.2.83.3.2.1.8 |
hh3cEOCComCnuResetThis variable is used to reset the CNU device. The
interface may be unavailable while the reset occurs and
data may be lost. During reading operation it returns
the state of the CNU device. running(1) indicates and
operates normal operation, reset(2) indicates and
operates reset mode. Writing can be done all the time.rw Enumeration .1.3.6.1.4.1.25506.2.83.3.2.1.9 |
hh3cEOCComCnuDeregisterderegister CNU.rw Enumeration .1.3.6.1.4.1.25506.2.83.3.2.1.10 |
hh3cEOCComCnuSaveSave the UNI and CNU related configurations to
the CNU.rw Enumeration .1.3.6.1.4.1.25506.2.83.3.2.1.11 |
hh3cEOCComCnuAccessControl whether the user can access to the network.rw Enumeration .1.3.6.1.4.1.25506.2.83.3.2.1.12 |
hh3cEOCComCnuMacTableThis table implements the management of CNUs. SEQUENCE OF Hh3cEOCComCnuMacEntry .1.3.6.1.4.1.25506.2.83.3.3 |
hh3cEOCComCnuMacEntryThe entry of the table hh3cEOCComCnuMacTable. Hh3cEOCComCnuMacEntry .1.3.6.1.4.1.25506.2.83.3.3.1 |
hh3cEOCComCnuMacAddressEOC CNU's MAC address.rw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.25506.2.83.3.3.1.1 |
hh3cEOCComCnuRowStatusOperation status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.83.3.3.1.2 |
hh3cEOCComCnuTempIndexEOC CNU's model index from hh3cHPEOCTemplateIndex,
If configure 0, the CNU select no model.rw Integer32 .1.3.6.1.4.1.25506.2.83.3.3.1.3 |
hh3cEOCComCnuInfoTablePrimary status of the specified CNU.
There will be one row in this table for each
information in the system. SEQUENCE OF Hh3cEOCComCnuInfoEntry .1.3.6.1.4.1.25506.2.83.3.4 |
hh3cEOCComCnuInfoEntryThe entry of the hh3cEOCComCnuInfoTable. Hh3cEOCComCnuInfoEntry .1.3.6.1.4.1.25506.2.83.3.4.1 |
hh3cEOCComCnuHardwareVersionEOC CNU's hardware version. If the object length is
zero, it means the version is unknown.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25506.2.83.3.4.1.1 |
hh3cEOCComCnuPCBVersionEOC CNU's PCB version.ro OCTET STRING .1.3.6.1.4.1.25506.2.83.3.4.1.2 |
hh3cEOCComCnuLinkStateThe cable port's link state. The physicaldown(1) state indicates
that the CNU is not powered on. The linkdown(2) state indicates
that the CNU is powered on, but registers fail. The linkup(3)
state indicates that the CNU is powered on, and registers
successful. The loopback(4) state indecates that the CNU is
powered on and registers successful, but loopback has detected.ro Enumeration .1.3.6.1.4.1.25506.2.83.3.4.1.3 |
hh3cEOCComCnuAttenuationThe cnu's average attenuation.ro Integer32 .1.3.6.1.4.1.25506.2.83.3.4.1.4 |
hh3cEOCComCnuSoftwareVersionEOC CNU's software version. If the object length is
zero, it means the version is unknown.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25506.2.83.3.4.1.5 |
hh3cEOCComCnuTxRateThe cnu's capability of tx speed in unit of 1Mbps.ro Integer32 .1.3.6.1.4.1.25506.2.83.3.4.1.6 |
hh3cEOCComCnuRxRateThe cnu's capability of rx speed in unit of 1Mbps.ro Integer32 .1.3.6.1.4.1.25506.2.83.3.4.1.7 |
hh3cEOCComCnuTxRateDropThe cnu's capability droping of tx
speed from it's history max value in unit of %.ro Integer32 .1.3.6.1.4.1.25506.2.83.3.4.1.8 |
hh3cEOCComCnuRxRateDropThe cnu's capability droping of rx
speed from it's history max value in unit of %.ro Integer32 .1.3.6.1.4.1.25506.2.83.3.4.1.9 |
hh3cEOCComCnuBandWidthTableSet bandwidth parameters. SEQUENCE OF Hh3cEOCComCnuBandWidthEntry .1.3.6.1.4.1.25506.2.83.3.5 |
hh3cEOCComCnuBandWidthEntryThe entry of table hh3cEOCComCnuBandWidthTable.
It is a pre-configuration. Hh3cEOCComCnuBandWidthEntry .1.3.6.1.4.1.25506.2.83.3.5.1 |
hh3cEOCComCnuMaxDownBWMaximum bandwidth allowed for the CNU,
measured in Kbit/s.rw Integer32 .1.3.6.1.4.1.25506.2.83.3.5.1.1 |
hh3cEOCComCnuSlaHighPriBWHigh priority bandwidth - measured in Kbit/s.
The value of this object should be the multiple of
the value of hh3cEOCComCnuMaxUpBW.
The high priority bandwidth should not be larger than the maximum
bandwidth.rw Integer32 .1.3.6.1.4.1.25506.2.83.3.5.1.2 |
hh3cEOCComCnuMaxUpBWTotal bandwidth - measured in Kbit/s.
The value of this object should be the multiple of
the value of hh3cEOCComCnuSlaHighPriBW.
The total bandwidth should be larger than the high priority bandwidth.rw Integer32 .1.3.6.1.4.1.25506.2.83.3.5.1.3 |
hh3cEOCComUniMan OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.83.4 |
hh3cEOCComUniManTableThis table defines several user network interface(UNI) system
parameters. SEQUENCE OF Hh3cEOCComUniManEntry .1.3.6.1.4.1.25506.2.83.4.1 |
hh3cEOCComUniManEntryThe entry of hh3cEOCComUniManTable. Hh3cEOCComUniManEntry .1.3.6.1.4.1.25506.2.83.4.1.1 |
hh3cEOCUniIndexThe index value which uniquely identifies the FE(Fast Ethernet)
interface of the CNU. Unsigned32 .1.3.6.1.4.1.25506.2.83.4.1.1.1 |
hh3cEOCComUniDescrA textual string containing information about the interface. This
string should include the name of the manufacturer, the product
name and the version of the interface hardware and software.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25506.2.83.4.1.1.2 |
hh3cEOCComUniStatusThe desired state of the user network interface. When a managed
system initializes, all user network interfaces start with down
state. The testing state indicates that no operational packets
can be passed. As a result of either explicit management action or
per configuration information retained by the managed system,
hh3cEOCComUniStatus is then changed to either the up or
testing states (or remains in the down state).rw Enumeration .1.3.6.1.4.1.25506.2.83.4.1.1.3 |
hh3cEOCComUniSpeedUser network interface speed.rw Enumeration .1.3.6.1.4.1.25506.2.83.4.1.1.4 |
hh3cEOCComUniDuplexUser network interface mode.rw Enumeration .1.3.6.1.4.1.25506.2.83.4.1.1.5 |
hh3cEOCComUniCurrentSpeedAn estimate of the interface's current bandwidth in
bits per second. For interfaces which do not vary in
bandwidth or for those where no accurate estimation
can be made, this object should contain the nominal
bandwidth. If the bandwidth of the interface is
greater than the maximum value reportable by this
object then this object should report its maximum
value (4,294,967,295). For a sub-layer which
has no concept of bandwidth, this object should be
zero.ro Gauge32 .1.3.6.1.4.1.25506.2.83.4.1.1.6 |
hh3cEOCComUniCurrentDuplexThe current mode of operation of the MAC
entity. 'unknown' indicates that the current
duplex mode could not be determined.
Management control of the duplex mode is
accomplished through the MAU MIB. When
an interface does not support autonegotiation,
or when autonegotiation is not enabled, the
duplex mode is controlled using
ifMauDefaultType. When autonegotiation is
supported and enabled, duplex mode is controlled
using ifMauAutoNegAdvertisedBits. In either
case, the currently operating duplex mode is
reflected both in this object and in ifMauType.
Note that this object provides redundant
information with ifMauType. Normally, redundant
objects are discouraged. However, in this
instance, it allows a management application to
determine the duplex status of an interface
without having to know every possible value of
ifMauType. This was felt to be sufficiently
valuable to justify the redundancy.ro Enumeration .1.3.6.1.4.1.25506.2.83.4.1.1.7 |
hh3cEOCComUniMdiType of the line connected to UNI interface:
mdi-ii(straight-through cable),
mdi-x (crossover cable),
mdi-auto (auto-sensing).rw Enumeration .1.3.6.1.4.1.25506.2.83.4.1.1.8 |
hh3cEOCComUniFlowControlFlow control status.
true(1) - Flow control status enable.
false(2) - Flow control status disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.83.4.1.1.9 |
hh3cEOCComUniCountResetReset the counter which is about packets of the interface,
then the counter will change to zero. There is no sense in
reading this object.rw Enumeration .1.3.6.1.4.1.25506.2.83.4.1.1.10 |
hh3cEOCComUniAliasThis object is an 'alias' name for the interface as
specified by a network manager, and provides a non-
volatile 'handle' for the interface.
On the first instantiation of an interface, the value
of hh3cEOCComUniAlias associated with that interface is the
zero-length string. As and when a value is written
into an instance of hh3cEOCComUniAlias through a network
management set operation, then the agent must retain
the supplied value in the hh3cEOCComUniAlias instance associated
with the same interface for as long as that interface
remains instantiated, including across all re-
initializations/reboots of the network management
system, including those which result in a change of
the interface's ifIndex and hh3cEOCUniIndex value.
An example of the value which a network manager might
store in this object for a WAN interface is the
(Telco's) circuit number/identifier of the interface.
Some agents may support write-access only for
interfaces having particular values of hh3cEOCComUniType. An
agent which supports write access to this object is
required to keep the value in non-volatile storage,
but it may limit the length of new values depending on
how much storage is already occupied by the current
values for other interfaces.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25506.2.83.4.1.1.11 |
hh3cEOCComUniTypeThe type of interface. Additional values for hh3cEOCComUniType
are assigned by the Internet Assigned Numbers
Authority(IANA), through updating the syntax of the
IANAifType textual convention.ro IANAifType (IANAifType-MIB) .1.3.6.1.4.1.25506.2.83.4.1.1.12 |
hh3cEOCComUniVLANTypeport vlan types.
hybrid (3) port can carry multiple VLANs.
If fabric function is supported, fabric(4) means the port is
a fabric port.rw Enumeration .1.3.6.1.4.1.25506.2.83.4.1.1.13 |
hh3cEOCComUniPvidThe PVID, the VLAN ID assigned to untagged frames or
Priority-Tagged frames received on this port.rw Integer32 .1.3.6.1.4.1.25506.2.83.4.1.1.14 |
hh3cEOCComUniVlanTagVLAN is set tagged or untagged.rw Enumeration .1.3.6.1.4.1.25506.2.83.4.1.1.15 |
hh3cEOCComUniPriorityThe default ingress User Priority for this port. This
only has effect on media, such as Ethernet, that do not
support native User Priority.rw Integer32 .1.3.6.1.4.1.25506.2.83.4.1.1.16 |
hh3cEOCComUniUpLineRateThe max speed upload in units of 1,000 bits per second
on this interface. The value should between 0 and 100Mbps.
If the value is 0, it means that the upload speed is only
restricted by the physical line.rw Unsigned32 .1.3.6.1.4.1.25506.2.83.4.1.1.17 |
hh3cEOCComUniDownLineRateThe max speed download in units of 1,000 bits per second
on this interface. The value should between 0 and 100Mbps.
If the value is 0, it means that the download speed is only
restricted by the physical line.rw Unsigned32 .1.3.6.1.4.1.25506.2.83.4.1.1.18 |
hh3cEOCComUniAdminStatusControl if open or close the UNI. If choose up(1), means the UNI is
opened and packets can pass it. If choose down(2), means the UNI is
closed and all packets will be discard.rw Enumeration .1.3.6.1.4.1.25506.2.83.4.1.1.19 |
hh3cEOCComUniCountTableA list of interface counter about frames entries. SEQUENCE OF Hh3cEOCComUniCountEntry .1.3.6.1.4.1.25506.2.83.4.2 |
hh3cEOCComUniCountEntryAn entry containing management information applicable
to a particular interface. Hh3cEOCComUniCountEntry .1.3.6.1.4.1.25506.2.83.4.2.1 |
hh3cEOCUniInPktsThe total number of packets (including bad packets,
broadcast packets, and multicast packets) received.ro Unsigned32 .1.3.6.1.4.1.25506.2.83.4.2.1.1 |
hh3cEOCUniInUPktsThe total number of good packets received that are
directed to the unicast address. Note that this
does not include multicast and broadcast packets.ro Unsigned32 .1.3.6.1.4.1.25506.2.83.4.2.1.2 |
hh3cEOCUniInBPktsThe total number of good packets received that are
directed to the broadcast address. Note that this
does not include multicast packets.ro Unsigned32 .1.3.6.1.4.1.25506.2.83.4.2.1.3 |
hh3cEOCUniInMPktsThe total number of good packets received that are
directed to a multicast address. Note that this number
does not include packets directed to the broadcast address.ro Unsigned32 .1.3.6.1.4.1.25506.2.83.4.2.1.4 |
hh3cEOCUniInPausePktsA count of MAC Control packets received on this
interface by the pause(flow control) operation.
This counter does not increment when the
interface is in a half-duplex mode.
Discontinuities in the value of this counter can
occur at re-initialization of the management
system.ro Unsigned32 .1.3.6.1.4.1.25506.2.83.4.2.1.5 |
hh3cEOCUniInTotalErrorsTotal count of the error packets received on this interface.ro Unsigned32 .1.3.6.1.4.1.25506.2.83.4.2.1.6 |
hh3cEOCUniInCRCErrsThe total number of packets received that
had a length (excluding framing bits, but
including FCS octets) of between 64 and 1518
octets, inclusive, but had either a bad
Frame Check Sequence (FCS) with an integral
number of octets (FCS Error) or a bad FCS with
a non-integral number of octets (Alignment Error).ro Unsigned32 .1.3.6.1.4.1.25506.2.83.4.2.1.7 |
hh3cEOCUniInUndersizePktsThe total number of packets received that are
less than 64 octets long (excluding framing bits,
but including FCS octets) and are otherwise well formed.ro Unsigned32 .1.3.6.1.4.1.25506.2.83.4.2.1.8 |
hh3cEOCUniInOversizePktsThe total number of packets received that are
longer than 1518 octets (excluding framing bits,
but including FCS octets) and are otherwise well formed.ro Unsigned32 .1.3.6.1.4.1.25506.2.83.4.2.1.9 |
hh3cEOCUniInErrorbyOtherThe total number of other error packets received on this interface.ro Unsigned32 .1.3.6.1.4.1.25506.2.83.4.2.1.10 |
hh3cEOCUniInOctetsThe total number of octets received on this interface.ro Unsigned32 .1.3.6.1.4.1.25506.2.83.4.2.1.11 |
hh3cEOCUniOutPktsThe total number of packets (including bad packets,
broadcast packets, and multicast packets) sent.ro Unsigned32 .1.3.6.1.4.1.25506.2.83.4.2.1.12 |
hh3cEOCUniOutUPktsThe total number of good packets sent that are
directed to the unicast address. Note that this
does not include multicast and broadcast packets.ro Unsigned32 .1.3.6.1.4.1.25506.2.83.4.2.1.13 |
hh3cEOCUniOutBPktsThe total number of good packets sent that are
directed to the broadcast address. Note that this
does not include multicast packets.ro Unsigned32 .1.3.6.1.4.1.25506.2.83.4.2.1.14 |
hh3cEOCUniOutMPktsThe total number of good packets sent that are
directed to a multicast address. Note that this number
does not include packets directed to the broadcast address.ro Unsigned32 .1.3.6.1.4.1.25506.2.83.4.2.1.15 |
hh3cEOCUniOutPausePktsThe total number of MAC control packets sent on this
interface by the pause operation. This counter does
not increment when the interface is in a half-duplex mode.
Discontinuities in the value of this counter can
occur at re-initialization of the management system.ro Unsigned32 .1.3.6.1.4.1.25506.2.83.4.2.1.16 |
hh3cEOCUniOutTotalErrorsThe total number of error packets sent on this interface.ro Unsigned32 .1.3.6.1.4.1.25506.2.83.4.2.1.17 |
hh3cEOCUniOutCollisionsThe best estimate of the total number of collisions
on this Ethernet segment.
The value returned will depend on the location of the
RMON probe. Section 8.2.1.3 (10BASE-5) and section
10.3.1.3 (10BASE-2) of IEEE standard 802.3 states that a
station must detect a collision, in the receive mode, if
three or more stations are transmitting simultaneously. A
repeater port must detect a collision when two or more
stations are transmitting simultaneously. Thus a probe
placed on a repeater port could record more collisions
than a probe connected to a station on the same segment
could. Probe location plays a much smaller role when considering
10BASE-T. 14.2.1.4 (10BASE-T) of IEEE standard 802.3
defines a collision as the simultaneous presence of signals
on the DO and RD circuits (transmitting and receiving
at the same time). A 10BASE-T station can only detect
collisions when it is transmitting. Thus probes placed on
a station and a repeater, should report the same number of
collisions. Note also that an RMON probe inside a repeater should
ideally report collisions between the repeater and one or
more other hosts (transmit collisions as defined by IEEE
802.3k) plus receiver collisions observed on any coax
segments to which the repeater is connected.ro Unsigned32 .1.3.6.1.4.1.25506.2.83.4.2.1.18 |
hh3cEOCUniOutDelayExceedDsdsThe number of packets discarded by this port due
to excessive transit delay through the bridge. It
is incremented by both transparent and source route bridges.ro Unsigned32 .1.3.6.1.4.1.25506.2.83.4.2.1.19 |
hh3cEOCUniOutErrorbyOtherThe total number of other error packets sent on this interface.
Other error packets means the error packets out of collision packets
and excessive delayed packets.ro Unsigned32 .1.3.6.1.4.1.25506.2.83.4.2.1.20 |
hh3cEOCUniOutDroppedFramesThe total number of frames dropped because of buffer failure.ro Unsigned32 .1.3.6.1.4.1.25506.2.83.4.2.1.21 |
hh3cEOCUniOutOctetsThe total number of octets transmitted out of the interface.ro Unsigned32 .1.3.6.1.4.1.25506.2.83.4.2.1.22 |
hh3cEOCCommonTrap OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.83.5 |
hh3cEOCTrapPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.83.5.0 |
hh3cEOCCnuRegExcessTrapA hh3cEOCCnuRegExcessTrap notification is sent when the
number of registered CNUs exceeds the limit. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.83.5.0.1 |
hh3cEOCCnuRegExcessRecoverTrapA hh3cEOCCnuRegExcessRecoverTrap notification is sent when
hh3cEOCCnuRegExcessTrap is detected and then recoverd. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.83.5.0.2 |
hh3cEOCCnuRegSuccTrapA hh3cEOCCnuRegSuccTrap notification is sent when a
CNU registers successful. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.83.5.0.3 |
hh3cEOCCnuOffLineTrapA hh3cEOCCnuOffLineTrap notification is sent when a
CNU offline. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.83.5.0.4 |
hh3cEOCCnuLinkupTrapA hh3cEOCCnuLinkupTrap notification is sent when a
CNU linkup. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.83.5.0.5 |
hh3cEOCOamDisconnectTrapA hh3cEOCOamDisconnectionTrap notification is sent when
LLID's OAM link is disconnected. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.83.5.0.6 |
hh3cEOCOamDisconnectRecoverTrapA hh3cEOCOamDisconnectionRecoverTrap notification is sent when
LLID's OAM link is disconnected and then connected. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.83.5.0.7 |
hh3cEOCBandwidthNotEnoughTrapBandwidth is not enough, cnu can not bind now. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.83.5.0.8 |
hh3cEOCCnuAttenuationTrapA hh3cHPEOCCnuAttenuationTrap notification is sent when a
CNU's attenuation is changing. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.83.5.0.9 |
hh3cEOCCnuRegFailTrapA hh3cEOCCnuRegFailTrap notification is sent when a
CNU registers fail. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.83.5.0.10 |
hh3cEOCCLTCablePortErrorTrapA hh3cEOCCLTCablePortErrorTrap notification is sent when the
hardware of cable port occurs error or CLT's vlan is configged
error. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.83.5.0.11 |
hh3cEOCCLTCablePortErrReTrapA hh3cEOCCLTCablePortErrReTrap notification is sent when cable port
error and then recovered. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.83.5.0.12 |
hh3cEOCCnuTxRateDropTrapA hh3cEOCCnuTxRateDropTrap notification is sent when cable port
rate of TX capability drop exceeded threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.83.5.0.13 |
hh3cEOCCnuTxRateDropRecoverTrapA hh3cEOCCnuTxRateDropRecoverTrap notification is sent when cable port
rate of TX capability recover from the recent rate-drop trap. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.83.5.0.14 |
hh3cEOCCnuRxRateDropTrapA hh3cEOCCnuRxRateDropTrap notification is sent when cable port
rate of RX capability drop exceeded threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.83.5.0.15 |
hh3cEOCCnuRxRateDropRecoverTrapA hh3cEOCCnuRxRateDropRecoverTrap notification is sent when cable port
rate of RX capability recover from the recent rate-drop trap. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.83.5.0.16 |
hh3cEOCCnuFWDownLoadErrTrapA hh3cEOCCnuFWDownLoadErrTrap notification is sent when CLT can't
download CNU firmware from the server successfully. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.83.5.0.17 |
hh3cEOCCnuFWDownLoadErrReTrapA hh3cEOCCnuFWDownLoadErrReTrap notification is sent when CLT recover
from the download CNU firmware error. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.83.5.0.18 |
hh3cEOCCnuDeviceTypeErrTrapA hh3cEOCCnuDeviceTypeErrTrap notification is sent when the online CNU
doesn't match the type which user defined earlier. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.83.5.0.19 |
hh3cEOCCnuDeviceTypeErrReTrapA hh3cEOCCnuDeviceTypeErrReTrap notification is sent when the online CNU
doesn't match the type which user defined earlier and then recover. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.83.5.0.20 |
hh3cEOCCnuAutoUpdateErrTrapA hh3cEOCCnuAutoUpdateErrTrap notification is sent when the online CNU
doesn't auto update successfully. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.83.5.0.21 |
hh3cEOCCnuAutoUpdateSuccTrapA hh3cEOCCnuAutoUpdateSuccTrap notification is sent when the online CNU
auto update successfully. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.83.5.0.22 |
hh3cEOCLoopbackDetectTrapA hh3cEOCLoopbackDetectTrap notification is sent when the loopback between
the ethernet ports of CNU or CLT is found. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.83.5.0.23 |
hh3cEOCLoopbackRecoverTrapA hh3cEOCLoopbackRecoverTrap notification is sent when the loopback between
the ethernet ports of CNU or CLT is recover. NOTIFICATION-TYPE .1.3.6.1.4.1.25506.2.83.5.0.24 |
hh3cEOCComOnLineCnuMan OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.83.6 |
hh3cEOCComCnuTypeTableThis table defines the description of cnu typ. SEQUENCE OF Hh3cEOCComCnuTypeEntry .1.3.6.1.4.1.25506.2.83.6.1 |
hh3cEOCComCnuTypeEntryThe entry of the table hh3cEOCComCnuTypeTable. Hh3cEOCComCnuTypeEntry .1.3.6.1.4.1.25506.2.83.6.1.1 |
hh3cEOCComCnuTypeIdxA unique value for each cnu types. Its value
ranges between 1 and the value of cny typess. Unsigned32 .1.3.6.1.4.1.25506.2.83.6.1.1.1 |
hh3cEOCComCnuDescriptonThe description for unique cnu types.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25506.2.83.6.1.1.2 |
hh3cEOCComCnuNumTableThis table defines the number of cnu registered in variable types
of the CLT . SEQUENCE OF Hh3cEOCComCnuNumEntry .1.3.6.1.4.1.25506.2.83.6.2 |
hh3cEOCComCnuNumEntryThe entry of the table hh3cEOCComCnuNumTable. Hh3cEOCComCnuNumEntry .1.3.6.1.4.1.25506.2.83.6.2.1 |
hh3cEOCComCnuNumberThe number of special type of cnu that has been registerd in clt.ro Integer32 .1.3.6.1.4.1.25506.2.83.6.2.1.1 |