HH3C-HPEOC-MIB
The objects in this MIB module are used to manage and display current configuration of Ethernet Over Cable Network (EOC) which based on HomePlug(HP) AV Specification.
Main OID:
hh3cHPEOC.1.3.6.1.4.1.25506.2.84
80
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
80 total| Object Name |
|---|
hh3cHPEOCThe objects in this MIB module are used to manage and
display current configuration of Ethernet Over Cable
Network (EOC) which based on HomePlug(HP) AV Specification. MODULE-IDENTITY .1.3.6.1.4.1.25506.2.84 |
hh3cHPEOCSystem OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.84.1 |
hh3cHPEOCCltVlanTypeControl EOC CLT's VLAN type,
ieee8021q : 802.1q VLAN mode,
portbased : portbased VLAN mode.rw Enumeration .1.3.6.1.4.1.25506.2.84.1.1 |
hh3cHPEOCCltVlanManTableThis table implements the management of CLT(Coax Line Terminal)
VLAN. SEQUENCE OF Hh3cHPEOCCltVlanManEntry .1.3.6.1.4.1.25506.2.84.1.2 |
hh3cHPEOCCltVlanManEntryThe entry of the table hh3cHPEOCCltVlanManTable. Hh3cHPEOCCltVlanManEntry .1.3.6.1.4.1.25506.2.84.1.2.1 |
hh3cHPEOCCltEthPortTypeControl CLT ethernet ports' type,
normal : port which used for normal translation,
debug : port which used for debug.rw Enumeration .1.3.6.1.4.1.25506.2.84.1.2.1.1 |
hh3cHPEOCCltSysManTableThis table implements the management of CLT(Coax Line Terminal). SEQUENCE OF Hh3cHPEOCCltSysManEntry .1.3.6.1.4.1.25506.2.84.1.3 |
hh3cHPEOCCltSysManEntryThe entry of the table hh3cHPEOCCltSysManTable. Hh3cHPEOCCltSysManEntry .1.3.6.1.4.1.25506.2.84.1.3.1 |
hh3cHPEOCCltDescrSet the description of CLT.rw DisplayString .1.3.6.1.4.1.25506.2.84.1.3.1.1 |
hh3cHPEOCCltFwVersionEOC firmware version. If the object length is
zero, it means the version is unknown.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25506.2.84.1.3.1.2 |
hh3cHPEOCCltLinkStateThe cable port's link state. The physicaldown(1) state indicates
that the CLT is not powered on. The linkdown(2) state indicates
that the CLT is powered on, but registers fail. The linkup(3)
state indicates that the CLT is powered on, and registers
successful. The loopback(4) state indecates that the CLT is
powered on and registers successful, but loopback has detected.ro Enumeration .1.3.6.1.4.1.25506.2.84.1.3.1.3 |
hh3cHPEOCCnuSysManTableThis table implements the management of CNUs. SEQUENCE OF Hh3cHPEOCCnuSysManEntry .1.3.6.1.4.1.25506.2.84.1.4 |
hh3cHPEOCCnuSysManEntryThe entry of the table hh3cHPEOCCnuSysManTable. Hh3cHPEOCCnuSysManEntry .1.3.6.1.4.1.25506.2.84.1.4.1 |
hh3cHPEOCCnuBcastControlBroadcast storm suppression status.
true(1) - Broadcast storm suppression enable.
false(2) - Broadcast storm suppression disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.84.1.4.1.1 |
hh3cHPEOCCnuAnonymStatusAnonymity status.
true(1) - the user which uses the CNU is anonymous.
false(2) - the user which uses the CNU has an account.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.84.1.4.1.2 |
hh3cHPEOCCnuMacLimitConfigure the max number of MAC address entries which can access
through the CNU, it ranges from 1 to 8.
Otherwise,
If configure 0, the CNU won't limit the MAC address entry.
If configure 0xFF, it means no MAC address entry can access the CNU.rw Unsigned32 .1.3.6.1.4.1.25506.2.84.1.4.1.3 |
hh3cHPEOCCltAutoUpgradeAuto upgrade Status.
true(1) - The firmware of the CNU will be auto changed by CLT.
false(2)- The firmware of the CNU will not be auto changed.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.84.1.5 |
hh3cHPEOCOnLineCnuNumberThe total number of the online CNU(s).ro Integer32 .1.3.6.1.4.1.25506.2.84.1.6 |
hh3cHPEOCCpuMacAddressEOC CPU's MAC address.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.25506.2.84.1.7 |
hh3cHPEOCOffLineCnuNumberThe total number of the offline CNU(s).ro Integer32 .1.3.6.1.4.1.25506.2.84.1.8 |
hh3cHPEOCDownLoadCNUFWResultDownload CNU firmware result.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25506.2.84.1.9 |
hh3cHPEOCCltAutoUpgradeTypeType of auto upgrade status.
It depends on hh3cHPEOCCltAutoUpgrade status.
flash - The CLT auto upgrade the firmware inside its flash
to the CNUs.
ftp - First download the firmware from FTP server to the CLT,
then the CLT auto upgrade the firmware to the CNUs.
tftp - First download the firmware from TFTP server to the CLT,
then the CLT auto upgrade the firmware to the CNUs.rw Enumeration .1.3.6.1.4.1.25506.2.84.1.10 |
hh3cHPEOCAutoUpObjects OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.84.1.11 |
hh3cHPEOCServerAddressThe address of remote host acting as server for operation.
The default value is 0.0.0.0rw IpAddress .1.3.6.1.4.1.25506.2.84.1.11.1 |
hh3cHPEOCServerUserWhen using ftp to transfer files, the user name must be
specified through this node. It contains 1 to 30 characters.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25506.2.84.1.11.2 |
hh3cHPEOCServerPasswordRemote user password for copying via ftp protocol. Optionally,
this object may be ignored for protocols other than ftp.
It contains 1 to 31 characters.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25506.2.84.1.11.3 |
hh3cHPEOCCltLoopbackDetectLoopback detect Status.
true(1) - The loopback detect is enabled.
false(0)- The loopback detect is disabled.rw Enumeration .1.3.6.1.4.1.25506.2.84.1.12 |
hh3cHPEOCTemplateEnableUse template for white-list cnu.
true(1) - Use template is enabled.
false(0)- Use template detect is disabled.rw Enumeration .1.3.6.1.4.1.25506.2.84.1.13 |
hh3cHPEOCCableInfo OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.84.2 |
hh3cHPEOCCableInfoTableThis table defines the primary parameters of the
cable information. SEQUENCE OF Hh3cHPEOCCableInfoEntry .1.3.6.1.4.1.25506.2.84.2.1 |
hh3cHPEOCCableInfoEntryThe entry of the table hh3cHPEOCCableInfoTable. Hh3cHPEOCCableInfoEntry .1.3.6.1.4.1.25506.2.84.2.1.1 |
hh3cHPEOCFECErrorsThe cable port's FEC bits errors ratio. FEC means the
payload Forward Error Correction. It's a technology of
controlling errors. Packets in transmission is checked by
the receiver, if error occurs, the receiver will announce
the sender to resend.ro Counter64 .1.3.6.1.4.1.25506.2.84.2.1.1.1 |
hh3cHPEOCAvgBitsPerCarrierThe cable port's average bits per carrier.ro Unsigned32 .1.3.6.1.4.1.25506.2.84.2.1.1.2 |
hh3cHPEOCAvgSNRPerCarrierThe cable port's signal noise ratio(SNR) bits per carrier.ro Integer32 .1.3.6.1.4.1.25506.2.84.2.1.1.3 |
hh3cHPEOCAvgInPBCRCErrorsThe input PB CRC errors on average.ro Unsigned32 .1.3.6.1.4.1.25506.2.84.2.1.1.4 |
hh3cHPEOCInTotalPktsThe total number of packets(including bad packets)
received on this interface.ro Counter64 .1.3.6.1.4.1.25506.2.84.2.1.1.5 |
hh3cHPEOCAvgOutPowerThe cable port's power sent on average, the unit is db.ro Integer32 .1.3.6.1.4.1.25506.2.84.2.1.1.6 |
hh3cHPEOCAvgOutPBCRCErrorsThe cable port's physical block(PB) cyclic redundancy
check(CRC) errors sent on average.ro Unsigned32 .1.3.6.1.4.1.25506.2.84.2.1.1.7 |
hh3cHPEOCOutTotalPktsThe total count of the packets(including bad packets)
sent on this interface.ro Counter64 .1.3.6.1.4.1.25506.2.84.2.1.1.8 |
hh3cHPEOCBitPerSymbolTableThis table defines the bits per symbol parameters of the
cable line. SEQUENCE OF Hh3cHPEOCBitPerSymbolEntry .1.3.6.1.4.1.25506.2.84.2.2 |
hh3cHPEOCBitPerSymbolEntryThe entry of the table hh3cHPEOCBitPerSymbolTable. Hh3cHPEOCBitPerSymbolEntry .1.3.6.1.4.1.25506.2.84.2.2.1 |
hh3cHPEOCBitPerSymbolIndexThe index of the hh3cHPEOCBitPerSymbolTable. Unsigned32 .1.3.6.1.4.1.25506.2.84.2.2.1.1 |
hh3cHPEOCBitPerSymbolhh3cHPEOCBitPerSymbol returns all the bits per symbol on the fixed
frequency. Each 4 bits stand for one value, all the values
picking-up will make up a cable bit map.ro OCTET STRING .1.3.6.1.4.1.25506.2.84.2.2.1.2 |
hh3cHPEOCTemplate OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.84.3 |
hh3cHPEOCTemplateGlobalTableThis table defines the global parameters of the
Template information. SEQUENCE OF Hh3cHPEOCTemplateGlobalEntry .1.3.6.1.4.1.25506.2.84.3.1 |
hh3cHPEOCTemplateGlobalEntryThe entry of the table hh3cHPEOCTemplateGlobalTable. Hh3cHPEOCTemplateGlobalEntry .1.3.6.1.4.1.25506.2.84.3.1.1 |
hh3cHPEOCTemplateIndexThe index of cable Template.rw Integer32 .1.3.6.1.4.1.25506.2.84.3.1.1.1 |
hh3cHPEOCTemplateTypeThe cable Template's type, can not change after create it.rw Integer32 { switch(1), gateway(2) } .1.3.6.1.4.1.25506.2.84.3.1.1.2 |
hh3cHPEOCTemplateNameThe cable Template's name, it's recommended to set it
uniquely and understandably. Length: 1 to 15 characters.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25506.2.84.3.1.1.3 |
hh3cHPEOCTemplateDescrThe cable Template's description. Length: 0 to 63 characters.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25506.2.84.3.1.1.4 |
hh3cHPEOCTemplateCnuMaxDownBWMaximum downstream bandwidth allowed for the CNU,
measured in Kbit/s, ranges from 0 to 16384, and must be multiples of 64.rw Integer32 .1.3.6.1.4.1.25506.2.84.3.1.1.5 |
hh3cHPEOCTemplateCnuMaxUpBWMaximum upstream bandwidth allowed for the CNU,
measured in Kbit/s, ranges from 0 to 16384, and must be multiples of 64.rw Integer32 .1.3.6.1.4.1.25506.2.84.3.1.1.6 |
hh3cHPEOCTemplateCnuBcastControlBroadcast storm suppression status.
true(1) - Broadcast storm suppression enable.
false(2) - Broadcast storm suppression disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.84.3.1.1.7 |
hh3cHPEOCTemplateCnuMacLimitConfigure the max number of MAC address entries which can access
through the CNU, it ranges from 1 to 8.
Otherwise,
If configure 0, the CNU won't limit the MAC address entry.
If configure 0xFF, it means no MAC address entry can access the CNU.rw Unsigned32 .1.3.6.1.4.1.25506.2.84.3.1.1.8 |
hh3cHPEOCTemplateCb201VlanEnUse for Cb201 cnu only.
true(1) - Enable vlan insert function.
false(2) - Disable vlan insert function.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.84.3.1.1.9 |
hh3cHPEOCTemplateRowStatusOperation status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.84.3.1.1.10 |
hh3cHPEOCTemplateSwitchTableThis table defines the port parameters of the
switch type cnu. it's not affect on the type of gateway Template. SEQUENCE OF Hh3cHPEOCTemplateSwitchEntry .1.3.6.1.4.1.25506.2.84.3.2 |
hh3cHPEOCTemplateSwitchEntryThe entry of the table hh3cHPEOCTemplateSwitchTable. Hh3cHPEOCTemplateSwitchEntry .1.3.6.1.4.1.25506.2.84.3.2.1 |
hh3cHPEOCTemplateUniIndexThe index value which uniquely identifies the FE
interface of the CNU. Integer32 .1.3.6.1.4.1.25506.2.84.3.2.1.1 |
hh3cHPEOCTemplateUniSpeedUser network interface speed.rw Enumeration .1.3.6.1.4.1.25506.2.84.3.2.1.2 |
hh3cHPEOCTemplateUniDuplexUser network interface mode.rw Enumeration .1.3.6.1.4.1.25506.2.84.3.2.1.3 |
hh3cHPEOCTemplateUniPriorityThe default ingress User Priority for this port. This
only has effect on media, such as Ethernet, that do not
support native User Priority.rw Integer32 .1.3.6.1.4.1.25506.2.84.3.2.1.4 |
hh3cHPEOCTemplateUniFlowControlFlow control status.
true(1) - Flow control status enable.
false(2) - Flow control status disable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.25506.2.84.3.2.1.5 |
hh3cHPEOCTemplateUniUpLineRateThe max speed upload in units of 1,024 bits per second
on this interface. The value should between 0 and 8Mbps.
If the value is 0, it means that the upload speed is only
restricted by the physical line.rw Unsigned32 .1.3.6.1.4.1.25506.2.84.3.2.1.6 |
hh3cHPEOCTemplateUniDownLineRateThe max speed download in units of 1,024 bits per second
on this interface. The value should between 0 and 8Mbps.
If the value is 0, it means that the download speed is only
restricted by the physical line.rw Unsigned32 .1.3.6.1.4.1.25506.2.84.3.2.1.7 |
hh3cHPEOCTemplateUniAdminStatusControl if open or close the UNI. If choose up(1), means the UNI is
opened and packets can pass it. If choose down(2), means the UNI is
closed and all packets will be discard.rw Enumeration .1.3.6.1.4.1.25506.2.84.3.2.1.8 |
hh3cHPEOCTemplateUniVLANTypeport vlan types.
hybrid (3) port can carry multiple VLANs.rw Enumeration .1.3.6.1.4.1.25506.2.84.3.2.1.9 |
hh3cHPEOCTemplateUniPvidThe PVID, the VLAN ID assigned to untagged frames or
Priority-Tagged frames received on this port.rw Integer32 .1.3.6.1.4.1.25506.2.84.3.2.1.10 |
hh3cHPEOCTemplateUniVlanTagVLAN is set tagged or untagged.rw Enumeration .1.3.6.1.4.1.25506.2.84.3.2.1.11 |
hh3cHPEOCCnuAccess OBJECT IDENTIFIER .1.3.6.1.4.1.25506.2.84.4 |
hh3cHPEOCCnuAccessTableThis table defines the global parameters of the
cnu type permitting to access. SEQUENCE OF Hh3cHPEOCCnuAccessEntry .1.3.6.1.4.1.25506.2.84.4.1 |
hh3cHPEOCCnuAccessEntryThe entry of the table hh3cHPEOCCnuAccessTable. Hh3cHPEOCCnuAccessEntry .1.3.6.1.4.1.25506.2.84.4.1.1 |
hh3cHPEOCCnuAccessIndexThe index value which uniquely identifies the
manuinfo of the CNU.rw Integer32 .1.3.6.1.4.1.25506.2.84.4.1.1.1 |
hh3cHPEOCCnuHFIDThe Cnu's HFID. Every type Cnu has it's unique HFID.
Length: 1 to 64 characters.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25506.2.84.4.1.1.2 |
hh3cHPEOCManuInfoThe Cnu's manufactory infofamiont.
Length: 0 to 63 characters.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.25506.2.84.4.1.1.3 |
hh3cHPEOCCnuTypeThe Cnu's function type.rw Integer32 { switch(1), gateway(2) } .1.3.6.1.4.1.25506.2.84.4.1.1.4 |
hh3cHPEOCCnuSwitchTypeThe Cnu's switch chip type. It's useless for gataway type cnu.rw Integer32 { rtl8306e(1), ar8236(2), mv6061(3), mv6031(4) } .1.3.6.1.4.1.25506.2.84.4.1.1.5 |
hh3cHPEOCCnuUniNumUni number of the Cnu. It's useless for gataway type cnu.rw Integer32 .1.3.6.1.4.1.25506.2.84.4.1.1.6 |
hh3cHPEOCCnuPhy2UniReflection from phy port to uni port of the cnu.
It's useless for gataway type cnu.
For example, phy port 0,1,2,3 is reflect to uni port
1,2,3,4, then the value of this mib is {0,1,2,3}rw OCTET STRING .1.3.6.1.4.1.25506.2.84.4.1.1.7 |
hh3cHPEOCCnuAccessRowStatusOperation status.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.25506.2.84.4.1.1.8 |