H3C-STORAGE-SNAP-MIB
AI MIB Summary
The H3C-STORAGE-SNAP-MIB module enables SNMP-based monitoring and management of storage device snapshot operations and status on H3C storage systems. It exposes metrics related to snapshot creation, retention, consistency, and lifecycle events to facilitate storage capacity planning and data protection verification.
This MIB describes the general information about snap of storage device.
Main OID:
h3cStorageSnap.1.3.6.1.4.1.2011.10.10.2
157
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
157 total| Object Name |
|---|
h3cStorageSnapThis MIB describes the general information about snap of storage device. MODULE-IDENTITY .1.3.6.1.4.1.2011.10.10.2 |
h3cSnapMibObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.10.2.1 |
h3cGlobalSnapSettingsObject OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.10.2.1.1 |
h3cAddtionalSpaceMaxSizeThis object identifies the maximal size of snapshot resource, safecache, and Continued replication Resource .ro Integer32 UNITS "TB" .1.3.6.1.4.1.2011.10.10.2.1.1.1 |
h3cSnapConfigTableThis table contains some entity to config the snapshot resources for special logic volumes. SEQUENCE OF H3cSnapConfigEntry .1.3.6.1.4.1.2011.10.10.2.1.2 |
h3cSnapConfigEntryAn entry containing configuration about the snapshot resource. H3cSnapConfigEntry .1.3.6.1.4.1.2011.10.10.2.1.2.1 |
h3cSnapLvIndexThis object identifies the index of h3cSnapConfigTable. The object identified by this index is the same object as identified by the same value of h3cLvIndex. H3cLvIDType (H3C-STORAGE-REF-MIB) .1.3.6.1.4.1.2011.10.10.2.1.2.1.1 |
h3cSnapAreaIdThis object identifies the snapshot resource of the logic volume.ro H3cLvIDType (H3C-STORAGE-REF-MIB) .1.3.6.1.4.1.2011.10.10.2.1.2.1.2 |
h3cSnapAreaAutoExpandThis object describes if the space of snapshot resource can be expanded automatically.rw H3cStorageEnableState (H3C-STORAGE-REF-MIB) .1.3.6.1.4.1.2011.10.10.2.1.2.1.3 |
h3cSnapAreaThresholdIf h3cSnapAreaAutoExpand is selected, the 'h3cSnapAreaThreshold' means the threshold of the snapshot resource.rw Integer32 .1.3.6.1.4.1.2011.10.10.2.1.2.1.4 |
h3cSnapAreaIncSizeIf h3cSnapAreaAutoExpand is selected, the 'h3cSnapAreaIncSize' means the amount of space to be allocated for each expansion.rw Integer32 UNITS "MB" .1.3.6.1.4.1.2011.10.10.2.1.2.1.5 |
h3cSnapAreaMaxSizeIf h3cSnapAreaAutoExpand is selected, the 'h3cSnapAreaIncSize' means the max size of snapshot resource.rw Integer32 UNITS "MB" .1.3.6.1.4.1.2011.10.10.2.1.2.1.6 |
h3cSnapAreaFullDeleteTMThis object identifies if the snapshot resource is out of space and expand failed, if the system delete the old timemark until enough space or not.rw Enumeration .1.3.6.1.4.1.2011.10.10.2.1.2.1.7 |
h3cSnapAreaNotifyThis object describes if a snapshot notification should be send to the client when the system create a timemark.rw H3cStorageEnableState (H3C-STORAGE-REF-MIB) .1.3.6.1.4.1.2011.10.10.2.1.2.1.8 |
h3cSnapAreaStatusThis object describes the state of the snapshot resource.ro H3cStorageOnlineState (H3C-STORAGE-REF-MIB) .1.3.6.1.4.1.2011.10.10.2.1.2.1.9 |
h3cSnapRaidUuidThis object describes the raid where the snapshot resource is created.rw H3cRaidIDType (H3C-STORAGE-REF-MIB) .1.3.6.1.4.1.2011.10.10.2.1.2.1.10 |
h3cSnapRaidSizeThis object describes the size designated when the snapshot resource is created.ro Integer32 UNITS "MB" .1.3.6.1.4.1.2011.10.10.2.1.2.1.11 |
h3cSnapRaidSelectPolicyThis object describes the policy when the snapshot resource is created automatically. Note that the value can not be 'none' when the value of associated h3cSnapRaidUuid object is equal to null.rw H3cExtendSelectPolicy (H3C-STORAGE-REF-MIB) .1.3.6.1.4.1.2011.10.10.2.1.2.1.12 |
h3cSnapAreaTotalSizeThis object identifies the current total size of the snapshot resource.ro Integer32 UNITS "MB" .1.3.6.1.4.1.2011.10.10.2.1.2.1.13 |
h3cSnapAreaFreeSizeThis object identifies the free size of the snapshot resource.ro Integer32 UNITS "MB" .1.3.6.1.4.1.2011.10.10.2.1.2.1.14 |
h3cSnapExtendTimesThis object identifies the times the snapshot resource extended.ro Integer32 .1.3.6.1.4.1.2011.10.10.2.1.2.1.15 |
h3cSnapRowStatusThis object identifies the action of snapshot resource. Note that the assocai snapshot resource can not be delete when a snapshot copy is processing or the TimeMark is enabled, or the replication is enabled.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.10.2.1.2.1.16 |
h3cSnapExpandTableThis table contains some entity to expand a snapshot resource. SEQUENCE OF H3cSnapExpandEntry .1.3.6.1.4.1.2011.10.10.2.1.3 |
h3cSnapExpandEntryAn entry containing expand information applicable to the snapshot resource. H3cSnapExpandEntry .1.3.6.1.4.1.2011.10.10.2.1.3.1 |
h3cSAExpRaidUuidThis index is identical to h3cRaidUuid in H3C-RAID-MIB. H3cRaidIDType (H3C-STORAGE-REF-MIB) .1.3.6.1.4.1.2011.10.10.2.1.3.1.1 |
h3cSAExpSizeThis object describes the increased size for snapshot resource when expanded. The units is million bytes. The value is always equal to zero when read.rw Integer32 UNITS "MB" .1.3.6.1.4.1.2011.10.10.2.1.3.1.2 |
h3cSAExpRaidSizeThis object describes the size for snapshot resource on the raid. The units is million bytes. The value is always equal to zero when read.ro Integer32 UNITS "MB" .1.3.6.1.4.1.2011.10.10.2.1.3.1.3 |
h3cSnapAreaExpRowStatusThis object describes the actions to expand the size for snap.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.10.2.1.3.1.4 |
h3cSnapCopyTableThis table contains some entity about snapshot copy. SEQUENCE OF H3cSnapCopyEntry .1.3.6.1.4.1.2011.10.10.2.1.4 |
h3cSnapCopyEntryAn entry containing snapshot copy information applicable. H3cSnapCopyEntry .1.3.6.1.4.1.2011.10.10.2.1.4.1 |
h3cSnapCopyLvIndexThis object identifies the index of destination logic volume for snapshot copy.rw H3cLvIDType (H3C-STORAGE-REF-MIB) .1.3.6.1.4.1.2011.10.10.2.1.4.1.1 |
h3cSnapCopyPercentageThis object identifies the percentage of snapshot copy. The value is equal to zero if the snapshot copy has not started. When finished, the value is always equal to '100'.ro Integer32 .1.3.6.1.4.1.2011.10.10.2.1.4.1.2 |
h3cSnapCopyStartTimeThis object identifies the time to start the snapshot copy.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.10.10.2.1.4.1.3 |
h3cSnapCopySwitchThis object describes the actions to start or stop the snapshot copy. When read, the value of 'none' will be get. Note that if the snapshot resource of source logic volume has not been created, the action of snapshot copy will be refused by agent.rw Enumeration .1.3.6.1.4.1.2011.10.10.2.1.4.1.4 |
h3cTimeMarkConfigTableThis table contains some entity to config a TimeMark on a special logic volume. SEQUENCE OF H3cTimeMarkConfigEntry .1.3.6.1.4.1.2011.10.10.2.1.5 |
h3cTimeMarkConfigEntryAn entry containing config information applicable to the TimeMark. H3cTimeMarkConfigEntry .1.3.6.1.4.1.2011.10.10.2.1.5.1 |
h3cTimeMarkCountsThis object identifies the max num of TimeMark which can be configed.rw Integer32 .1.3.6.1.4.1.2011.10.10.2.1.5.1.1 |
h3cTimeMarkInitializeTimeThis object identifies the date and time when the first TimeMark is created on the logic volume.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.10.10.2.1.5.1.2 |
h3cTimeMarkIntervalThis object identifies the interval when the TimeMark is created automatically if the value of this object is not equal to zero. The units is second. the min value is 10 seconds.rw Integer32 .1.3.6.1.4.1.2011.10.10.2.1.5.1.3 |
h3cTimeMarkLastTimeThis object identifies the date and time when the latest TimeMark is created on the logic volume.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.10.10.2.1.5.1.4 |
h3cTimeMarkTotalThis object identifies the current num of TimeMark.ro Integer32 .1.3.6.1.4.1.2011.10.10.2.1.5.1.5 |
h3cTimeMarkSwitchThis object describes enable or disable TimeMark.rw H3cStorageEnableState (H3C-STORAGE-REF-MIB) .1.3.6.1.4.1.2011.10.10.2.1.5.1.6 |
h3cTimeMarkCreateTableThis table contains some entity to create a TimeMark on a special logic volume. SEQUENCE OF H3cTimeMarkCreateEntry .1.3.6.1.4.1.2011.10.10.2.1.6 |
h3cTimeMarkCreateEntryAn entry containing create information applicable to the TimeMark. H3cTimeMarkCreateEntry .1.3.6.1.4.1.2011.10.10.2.1.6.1 |
h3cTimeMarkStampThis object identifies the date and time the TimeMark is created. DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.10.10.2.1.6.1.1 |
h3cTimeMarkCommentThis object identifies the comment of the TimeMark.ro OCTET STRING .1.3.6.1.4.1.2011.10.10.2.1.6.1.2 |
h3cTimeMarkSizeThis object identifies the current size of the TimeMark.ro Integer32 UNITS "KB" .1.3.6.1.4.1.2011.10.10.2.1.6.1.3 |
h3cTimeMarkRowStatusThis object identifies the action to create or delete the TimeMark. Note that the TimeMark can not be deleted if it is using.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.10.2.1.6.1.4 |
h3cTimeMarkCopyTableThis table contains some entity about a TimeMark copy. SEQUENCE OF H3cTimeMarkCopyEntry .1.3.6.1.4.1.2011.10.10.2.1.7 |
h3cTimeMarkCopyEntryAn entry containing config information applicable to the TimeMark copy. H3cTimeMarkCopyEntry .1.3.6.1.4.1.2011.10.10.2.1.7.1 |
h3cTMCopyDestLvIdThis object identifies the index of destination logic volume for TimeMark copy.ro H3cLvIDType (H3C-STORAGE-REF-MIB) .1.3.6.1.4.1.2011.10.10.2.1.7.1.1 |
h3cTMCopyPercentageThis object identifies the percentage of TimeMark copy. The value is equal to zero if the TimeMark copy has not started. When finished, the value is always equal to '100'.ro Integer32 .1.3.6.1.4.1.2011.10.10.2.1.7.1.2 |
h3cTMCopyStartTimeThis object identifies the time to start the TimeMark copy.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.10.10.2.1.7.1.3 |
h3cTMCopySwitchThis object describes the actions to start or stop the TimeMark copy. When read, the value of 'none' will be get.rw Enumeration .1.3.6.1.4.1.2011.10.10.2.1.7.1.4 |
h3cTimeMarkRollbackTableThis table contains some entity to use a TimeMark to rollback the logic volume. SEQUENCE OF H3cTimeMarkRollbackEntry .1.3.6.1.4.1.2011.10.10.2.1.8 |
h3cTimeMarkRollbackEntryAn entry containing config information applicable to use a TimeMark to rollback the logic volume. H3cTimeMarkRollbackEntry .1.3.6.1.4.1.2011.10.10.2.1.8.1 |
h3cTMRollbackPercentageThis object identifies the percentage of rollback.ro Integer32 .1.3.6.1.4.1.2011.10.10.2.1.8.1.1 |
h3cTMRollbackStartTimeThis object identifies the time to start the rollback.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.10.10.2.1.8.1.2 |
h3cTMRollbackSwitchThis object describes the actions to use a TimeMark to rollback the logic volume. Note that once you roll back, you cannot roll forward, all the later TimeMark behind it will be deleted.rw H3cStorageActionType (H3C-STORAGE-REF-MIB) .1.3.6.1.4.1.2011.10.10.2.1.8.1.3 |
h3cTimeViewTableThis table contains some entity to config a TimeView on a special TimeMark. SEQUENCE OF H3cTimeViewEntry .1.3.6.1.4.1.2011.10.10.2.1.9 |
h3cTimeViewEntryAn entry containing config information applicable to the TimeView. H3cTimeViewEntry .1.3.6.1.4.1.2011.10.10.2.1.9.1 |
h3cTimeViewStampThis object identifies the TimeView. The object identified by this index is the same object as identified by the same value of h3cTimeMarkStamp. DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.10.10.2.1.9.1.1 |
h3cTimeViewIDThis object identifies the TimeView.ro H3cLvIDType (H3C-STORAGE-REF-MIB) .1.3.6.1.4.1.2011.10.10.2.1.9.1.2 |
h3cTimeViewNameThis object identifies the name of the TimeView.rw OCTET STRING .1.3.6.1.4.1.2011.10.10.2.1.9.1.3 |
h3cTimeViewRowStatusThis object describes the actions to create or delete the TimeView.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.10.2.1.9.1.4 |
h3cReplicaConfigTableThis table contains some entity to config replication for a logic volume. SEQUENCE OF H3cReplicaConfigEntry .1.3.6.1.4.1.2011.10.10.2.1.10 |
h3cReplicaConfigEntryAn entry containing config information applicable to the replication for a logic volume. H3cReplicaConfigEntry .1.3.6.1.4.1.2011.10.10.2.1.10.1 |
h3cRepLocalLvIndexThis object identifies the local logic volume that is related with replication. The object identified by this index is the same object as identified by the same value of h3cSnapLvIndex. H3cLvIDType (H3C-STORAGE-REF-MIB) .1.3.6.1.4.1.2011.10.10.2.1.10.1.1 |
h3cLvRepLocalWayThe value of 'outgoing' means the h3cRepLocalLvIndex is the primary logic volume of replication, and the h3cRepRemoteLvIndex is the replica logic volume. The value of 'incoming' means the h3cRepLocalLvIndex is the replica logic volume of replication. , and the h3cRepRemoteLvIndex is the primary logic volume.ro Enumeration .1.3.6.1.4.1.2011.10.10.2.1.10.1.2 |
h3cRepLocalServerIPThis object identifies the ip address of local server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.10.2.1.10.1.3 |
h3cRepLocalServerIPTypeThis object identifies the ip address type of local server.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.10.2.1.10.1.4 |
h3cRepLocalServerNameThis object identifies the name of local server.ro OCTET STRING .1.3.6.1.4.1.2011.10.10.2.1.10.1.5 |
h3cRepLocalServerUsernameThis object identifies the username of local server.rw OCTET STRING .1.3.6.1.4.1.2011.10.10.2.1.10.1.6 |
h3cRepLocalServerPasswordThis object identifies the password of local server.rw OCTET STRING .1.3.6.1.4.1.2011.10.10.2.1.10.1.7 |
h3cRepRemoteServerIPThis object identifies the ip address of remote server.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.10.2.1.10.1.8 |
h3cRepRemoteServerIPTypeThis object identifies the ip address type of remote server.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.10.2.1.10.1.9 |
h3cRepRemoteServerNameThis object identifies the name of remote server.ro OCTET STRING .1.3.6.1.4.1.2011.10.10.2.1.10.1.10 |
h3cRepRemoteServerUsernameThis object identifies the username of remote server.rw OCTET STRING .1.3.6.1.4.1.2011.10.10.2.1.10.1.11 |
h3cRepRemoteServerPasswordThis object identifies the password of remote server.rw OCTET STRING .1.3.6.1.4.1.2011.10.10.2.1.10.1.12 |
h3cRepRemoteLvIndexThis object identifies the logic volume of remote server.rw H3cLvIDType (H3C-STORAGE-REF-MIB) .1.3.6.1.4.1.2011.10.10.2.1.10.1.13 |
h3cReplicaModeThis object identifies the replication mode: The value of 'adaptive' means that data from the primary resource is continuously replicated to a replica resource unless the system determines it is not practical or possible. The value of 'remote' means that a snapshot is taken of the primary resource at prescribed intervals based on the criteria you set (schedule and/or watermark value). Note that the associated Continuous Replication Resource can not be created if the value of this boject is not equal to 'adaptive'.rw Enumeration .1.3.6.1.4.1.2011.10.10.2.1.10.1.14 |
h3cReplicaWatermarkThis object identifies the size of watermark which means a replication is scheduled.rw Integer32 UNITS "MB" .1.3.6.1.4.1.2011.10.10.2.1.10.1.15 |
h3cReplicaWatermarkRetryIf the 'h3cReplicaWatermark' is set, This object identifies the interval time to retry if the last replication is failed. The units is minute.rw Integer32 .1.3.6.1.4.1.2011.10.10.2.1.10.1.16 |
h3cReplicaInitializeTimeThis object identifies the time to start an initial replication.rw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.10.10.2.1.10.1.17 |
h3cReplicaIntervalThis object identifies how often the replication should be repeated after initial replication. The units is minute.rw Integer32 .1.3.6.1.4.1.2011.10.10.2.1.10.1.18 |
h3cReplicaEncryptThis object identifies the encrypt option is enable or diable.rw H3cStorageEnableState (H3C-STORAGE-REF-MIB) .1.3.6.1.4.1.2011.10.10.2.1.10.1.19 |
h3cReplicaCompressThis object identifies the compress option is enable or diable.rw H3cStorageEnableState (H3C-STORAGE-REF-MIB) .1.3.6.1.4.1.2011.10.10.2.1.10.1.20 |
h3cReplicaUseExistTMThis object identifies if using the exist TimeMark to replicate or not.rw H3cStorageEnableState (H3C-STORAGE-REF-MIB) .1.3.6.1.4.1.2011.10.10.2.1.10.1.21 |
h3cReplicaProtocolThis object identifies the protocol about replication. The value 'tcp' means Transmission Control Protocol, and 'rudp' means Reliable User Datagram Protocol.rw Enumeration .1.3.6.1.4.1.2011.10.10.2.1.10.1.22 |
h3cReplicaScanDiffThis object identifies the system to scan both the primary and replica resource to determine how much data needs to be synchronized.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2011.10.10.2.1.10.1.23 |
h3cReplicaStatSwitchThis object identifies the action how to operate the replica. When read , a value of 'none' will be get. The value of 'promte' means remove the replication relation and promote the remote copy on the target server. The value of 'sync' means synchronize mannually (force a replication that is not scheduled.) The value of 'scan' means scan the delta data between primary resource and replica resource. The value of 'reversal' means switch the roles of the primary resource and replica resource. The replication configuration is maintained. The primary and replica must be synchronized in order to reverse a replica. The value of 'stop' means stop a replication that is currently in progress. The value of 'suspend' means suspend future replications from automatically being triggered by replication policies (watermark, interval, time). This will not stop a replication that is currently in progress. The value of 'resume' means resume the replication status from suspended to normal. Note that if the action of 'upgrade' is executed successfully, this replica resource will become a normal logic volume, and this entry will be deleted automatically. Note that if the action of 'reversal' is executed successfully, Clients will be disconnected from the former primary resource.rw Enumeration .1.3.6.1.4.1.2011.10.10.2.1.10.1.24 |
h3cReplicaRowStatusThis object identifies the action to enable or disable the replication.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.10.2.1.10.1.25 |
h3cReplicaStateTableThis table contains some entity to show replication state. SEQUENCE OF H3cReplicaStateEntry .1.3.6.1.4.1.2011.10.10.2.1.11 |
h3cReplicaStateEntryAn entry containing show information applicable to the replication state. H3cReplicaStateEntry .1.3.6.1.4.1.2011.10.10.2.1.11.1 |
h3cReplicaDeltaThis object identifies the size of delta data after last sync.ro Integer32 UNITS "MB" .1.3.6.1.4.1.2011.10.10.2.1.11.1.1 |
h3cReplicaLastSyncTimeThis object identifies the date and time when last sync is taken.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.10.10.2.1.11.1.2 |
h3cReplicaNextSyncTimeThis object identifies the date and time when next sync will be taken.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2011.10.10.2.1.11.1.3 |
h3cReplicaSyncTotalSizeThis object identifies how much data need to be synchronized to the replica resource for current replication.ro Integer32 UNITS "MB" .1.3.6.1.4.1.2011.10.10.2.1.11.1.4 |
h3cReplicaSyncCurPercentageThis object identifies how much data has been synchronized to the replica resource for current replication.ro Integer32 .1.3.6.1.4.1.2011.10.10.2.1.11.1.5 |
h3cReplicaSyncPerformanceThis object identifies the performance of the synchronize. The unit is MB/s.ro Integer32 .1.3.6.1.4.1.2011.10.10.2.1.11.1.6 |
h3cReplicaRunStatusThis object identifies the state of the replica.ro Enumeration .1.3.6.1.4.1.2011.10.10.2.1.11.1.7 |
h3cCDRConfigTableThis table contains some entity to config Continuous Replication Resource. SEQUENCE OF H3cCDRConfigEntry .1.3.6.1.4.1.2011.10.10.2.1.12 |
h3cCDRConfigEntryAn entry containing some information applicable to Continuous Replication Resource of the logic volume. H3cCDRConfigEntry .1.3.6.1.4.1.2011.10.10.2.1.12.1 |
h3cCDRLvIndexThis object identifies the source logic volume of the Continuous Replication Resource. The object identified by this index is the same object as identified by the same value of h3cRepLocalLvIndex. Note that an entry of h3cCDRConfigTable can be created only when the associated h3cCDRDistributeTable's objects is ready or the associated select policy is not equal to 'none'. If an entry is deleted, the associated h3cCDRDistributeTable objects should be deleted automatically. H3cLvIDType (H3C-STORAGE-REF-MIB) .1.3.6.1.4.1.2011.10.10.2.1.12.1.1 |
h3cCDRIDThis object identifies the Continuous Replication Resource.ro Integer32 .1.3.6.1.4.1.2011.10.10.2.1.12.1.2 |
h3cCDRStatusThis object identifies the state of the Continuous Replication Resource.ro H3cStorageOnlineState (H3C-STORAGE-REF-MIB) .1.3.6.1.4.1.2011.10.10.2.1.12.1.3 |
h3cCDRTotalSizeThis object identifies the total size of the Continuous Replication Resource.ro Integer32 UNITS "MB" .1.3.6.1.4.1.2011.10.10.2.1.12.1.4 |
h3cCDRFreeSizeThis object identifies the free size of the Continuous Replication Resource.ro Integer32 UNITS "MB" .1.3.6.1.4.1.2011.10.10.2.1.12.1.5 |
h3cCDRSelectPolicyThis object describes the policy about allocating the space for Continuous Replication Resource.rw H3cExtendSelectPolicy (H3C-STORAGE-REF-MIB) .1.3.6.1.4.1.2011.10.10.2.1.12.1.6 |
h3cCDRRowStatusThis object identifies the action to create or delete the Continuous Replication Resource.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.10.2.1.12.1.7 |
h3cCDRDistributeTableThis table contains some entity to config the distribution of Continuous Replication Resource. SEQUENCE OF H3cCDRDistributeEntry .1.3.6.1.4.1.2011.10.10.2.1.13 |
h3cCDRDistributeEntryAn entry containing some information applicable to the distribution of Continuous Replication Resource. H3cCDRDistributeEntry .1.3.6.1.4.1.2011.10.10.2.1.13.1 |
h3cCDRDistLvIndexThis index is identical to h3cLvIndex in H3C-LOGIC-VOLUME-MIB. H3cLvIDType (H3C-STORAGE-REF-MIB) .1.3.6.1.4.1.2011.10.10.2.1.13.1.1 |
h3cCDRRaidUuidThis index is identical to h3cRaidUuid in H3C-RAID-MIB. H3cRaidIDType (H3C-STORAGE-REF-MIB) .1.3.6.1.4.1.2011.10.10.2.1.13.1.2 |
h3cCDRRaidSizeThis object identifies the size on the special raid distributed for the Continuous Replication Resource.rw Integer32 UNITS "MB" .1.3.6.1.4.1.2011.10.10.2.1.13.1.3 |
h3cCDRExtRowStatusThis object identifies the action to create the distribution for the Continuous Replication Resource.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.10.2.1.13.1.4 |
h3cSafeCacheConfigTableThis table contains some entity to config SafeCache. SEQUENCE OF H3cSafeCacheConfigEntry .1.3.6.1.4.1.2011.10.10.2.1.14 |
h3cSafeCacheConfigEntryAn entry containing some information applicable to SafeCache of the logic volume. H3cSafeCacheConfigEntry .1.3.6.1.4.1.2011.10.10.2.1.14.1 |
h3cSafeCacheLvIndexThis object identifies the source logic volume of the SafeCache. The object identified by this index is the same object as identified by the same value of h3cLvindex. Note that an entry of h3cSafeCacheConfigTable can be created only when the associated h3cSafeCacheDistributeTable's objects is ready or the associated select policy is not equal to 'none'. If an entry is deleted, the associated h3cSafeCacheDistributeTable objects should be deleted automatically. H3cLvIDType (H3C-STORAGE-REF-MIB) .1.3.6.1.4.1.2011.10.10.2.1.14.1.1 |
h3cSafeCacheIDThis object identifies a SafeCache.ro Integer32 .1.3.6.1.4.1.2011.10.10.2.1.14.1.2 |
h3cSafeCacheStatusThis object identifies the state of the SafeCache.ro H3cStorageOnlineState (H3C-STORAGE-REF-MIB) .1.3.6.1.4.1.2011.10.10.2.1.14.1.3 |
h3cSafeCacheTotalSizeThis object identifies the total size of the SafeCache. The units is million bytes.ro Integer32 UNITS "MB" .1.3.6.1.4.1.2011.10.10.2.1.14.1.4 |
h3cSafeCacheFreeSizeThis object identifies the free size of the SafeCache. The units is million bytes.ro Integer32 UNITS "MB" .1.3.6.1.4.1.2011.10.10.2.1.14.1.5 |
h3cSafeCacheSelectPolicyThis object describes the policy about allocating the space for SafeCache.rw H3cExtendSelectPolicy (H3C-STORAGE-REF-MIB) .1.3.6.1.4.1.2011.10.10.2.1.14.1.6 |
h3cSafeCacheThresholdThis object identifies the maximal percentage of date changed before data flushing.rw Integer32 .1.3.6.1.4.1.2011.10.10.2.1.14.1.7 |
h3cSafeCacheFlushTimeThis object identifies the period during which the date can stay in cache before data flushing. The units is second.rw Integer32 .1.3.6.1.4.1.2011.10.10.2.1.14.1.8 |
h3cSafeCacheFlushCommandThis object identifies the number of commands when data flushing.rw Integer32 .1.3.6.1.4.1.2011.10.10.2.1.14.1.9 |
h3cSafeCacheSkipDupWriteThis object identifies skip duplicate write commands or not.rw Enumeration .1.3.6.1.4.1.2011.10.10.2.1.14.1.10 |
h3cSafeCacheRunStatusThis object identifies the run state of the SafeCache.ro Enumeration .1.3.6.1.4.1.2011.10.10.2.1.14.1.11 |
h3cSafeCacheSwitchThis object identifies the action of the SafeCache. The value 'suspend' means suspend the SafeCache. The value 'resume' means resume the SafeCache.rw Enumeration .1.3.6.1.4.1.2011.10.10.2.1.14.1.12 |
h3cSafeCacheRowStatusThis object identifies the action to create or delete the SafeCache.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.10.2.1.14.1.13 |
h3cSafeCacheDistributeTableThis table contains some entity to config the SafeCache resource. SEQUENCE OF H3cSafeCacheDistributeEntry .1.3.6.1.4.1.2011.10.10.2.1.15 |
h3cSafeCacheDistributeEntryAn entry containing some information applicable to SafeCache resource of the logic volume. H3cSafeCacheDistributeEntry .1.3.6.1.4.1.2011.10.10.2.1.15.1 |
h3cSafeCacheDistLvIndexThis index is identical to h3cLvIndex in H3C-LOGIC-VOLUME-MIB. H3cLvIDType (H3C-STORAGE-REF-MIB) .1.3.6.1.4.1.2011.10.10.2.1.15.1.1 |
h3cSafeCacheRaidUuidThis index is identical to h3cRaidUuid in H3C-RAID-MIB. H3cRaidIDType (H3C-STORAGE-REF-MIB) .1.3.6.1.4.1.2011.10.10.2.1.15.1.2 |
h3cSafeCacheRaidSizeThis object identifies the size on the special raid distributed for the SafeCache resource.rw Integer32 .1.3.6.1.4.1.2011.10.10.2.1.15.1.3 |
h3cSafeCacheExtRowStatusThis object identifies the action to create the distribution for the SafeCache resource.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.10.2.1.15.1.4 |
h3cMirrorConfigTableThis table contains some entity to config mirror. SEQUENCE OF H3cMirrorConfigEntry .1.3.6.1.4.1.2011.10.10.2.1.16 |
h3cMirrorConfigEntryAn entry containing some information applicable to mirror for the logic volume. H3cMirrorConfigEntry .1.3.6.1.4.1.2011.10.10.2.1.16.1 |
h3cMirrorLvIndexThis object identifies the source logic volume of the mirror. The object identified by this index is the same object as identified by the same value of h3cLvindex. Note that an entry of h3cMirrorConfigTable can be created only when the associated h3cMirrorDistributeTable's objects is ready or the associated select policy is not equal to 'none'. If an entry is deleted, the associated h3cMirrorDistributeTable objects should be deleted automatically. H3cLvIDType (H3C-STORAGE-REF-MIB) .1.3.6.1.4.1.2011.10.10.2.1.16.1.1 |
h3cMirrorTypeThis object identifies the type of the mirror.ro Enumeration .1.3.6.1.4.1.2011.10.10.2.1.16.1.2 |
h3cMirrorStatusThis object identifies the state of the mirror resource.ro H3cStorageOnlineState (H3C-STORAGE-REF-MIB) .1.3.6.1.4.1.2011.10.10.2.1.16.1.3 |
h3cMirrorNameThis object identifies the name of the mirror resource. it is used when promote mirror resource.rw OCTET STRING .1.3.6.1.4.1.2011.10.10.2.1.16.1.4 |
h3cMirrorSyncPercentageThis object identifies the percentage of the mirror sync.ro Integer32 .1.3.6.1.4.1.2011.10.10.2.1.16.1.5 |
h3cMirrorSyncPerformanceThis object identifies the performance of the mirror sync. The unit is MB/Sro Integer32 .1.3.6.1.4.1.2011.10.10.2.1.16.1.6 |
h3cMirrorDeltaThis object identifies size of delta data after the last mirror sync.ro Integer32 UNITS "MB" .1.3.6.1.4.1.2011.10.10.2.1.16.1.7 |
h3cMirrorRaidTypeThis object identifies the raid type of the mirror resource.rw Enumeration .1.3.6.1.4.1.2011.10.10.2.1.16.1.8 |
h3cMirrorSelectPolicyThis object describes the policy about allocating the space for mirror resource.rw H3cExtendSelectPolicy (H3C-STORAGE-REF-MIB) .1.3.6.1.4.1.2011.10.10.2.1.16.1.9 |
h3cMirrorSwitchThis object identifies the state of the mirror. The value of 'sync' means synchronize mannually. The value of 'swap' means switch the roles of the primary resource and mirror resource. The value of 'promte' means break the mirrored pair and convert the mirror resource into an independent logic volume. The new logic volume will have all of the properties of a regular logic volume. Note that if the action of 'promte' is executed successfully, this mirror resource will become a primary logic volume, and this entry will be deleted automatically.rw Enumeration .1.3.6.1.4.1.2011.10.10.2.1.16.1.10 |
h3cMirrorExtendRaidUuidThis object identifies the raid of the mirror resource when the primary logic volume resource is extended.rw H3cRaidIDType (H3C-STORAGE-REF-MIB) .1.3.6.1.4.1.2011.10.10.2.1.16.1.11 |
h3cMirrorRowStatusThis object identifies the action to create or delete the mirror resource.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.10.2.1.16.1.12 |
h3cMirrorDistributeTableThis table contains some entity to config the mirror resource. SEQUENCE OF H3cMirrorDistributeEntry .1.3.6.1.4.1.2011.10.10.2.1.17 |
h3cMirrorDistributeEntryAn entry containing some information applicable to mirror resource for the logic volume. H3cMirrorDistributeEntry .1.3.6.1.4.1.2011.10.10.2.1.17.1 |
h3cMirrorDistLvIndexThis index is identical to h3cLvIndex in H3C-LOGIC-VOLUME-MIB. H3cLvIDType (H3C-STORAGE-REF-MIB) .1.3.6.1.4.1.2011.10.10.2.1.17.1.1 |
h3cMirrorRaidUuidThis index is identical to h3cRaidUuid in H3C-RAID-MIB. H3cRaidIDType (H3C-STORAGE-REF-MIB) .1.3.6.1.4.1.2011.10.10.2.1.17.1.2 |
h3cMirrorRaidSizeThis object identifies the size on the special raid distributed for the mirror resource.rw Integer32 .1.3.6.1.4.1.2011.10.10.2.1.17.1.3 |
h3cMirrorExtRowStatusThis object identifies the action to create or delete the distribution for the mirror resource.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.10.2.1.17.1.4 |