H3C-SNA-DLSW-EXT-MIB
AI MIB Summary
The H3C-SNA-DLSW-EXT-MIB enables monitoring and management of Data Link Switching (DLSw) protocol enhancements on H3C and Huawei-3COM network devices, specifically tracking session states, circuit statistics, and local/remote peer configurations beyond standard RFC 1795, 2024, and 2166 definitions.
The MIB module for management of HUAWEI-3COM specific Data Link Switching protocol enhancements. DLSw is described in RFC 1795, RFC 2024 and RFC2166.
Main OID:
h3cDlswExt.1.3.6.1.4.1.2011.10.2.62
126
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
126 total| Object Name |
|---|
h3cDlswExtThe MIB module for management of HUAWEI-3COM specific Data Link
Switching protocol enhancements. DLSw is described in
RFC 1795, RFC 2024 and RFC2166. MODULE-IDENTITY .1.3.6.1.4.1.2011.10.2.62 |
h3cDlswExtMIBObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.62.1 |
h3cdeNode OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.62.1.1 |
h3cdeNodeVendorIDThe value identifies the manufacturer's IEEE-assigned
Organizationally Unique Identifier (OUI) of this DLSw.
This information is reported in DLSw Capabilities
Exchange.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.62.1.1.1 |
h3cdeNodeIpAddrTypeThe type of ip address: IPv4 or IPv6.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.62.1.1.2 |
h3cdeNodeLocalAddrLocal peer ip address. This ip address must have been
configured for a port on the router. If no local peer
ip address is configured, then this object will be the
empty string.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.62.1.1.3 |
h3cdeNodePriorityPeer priority advertised to remote peers in the DLSw Capabilities
Exchange. If an end station can reach through more
than one peer, the priority of each peer will be considered when
a circuit is established.
A lower priority indicates that peer will be the
preferred choice if there are more than one path to the
destination. A value of 65535 indicates the value is meaningless.rw Integer32 (1..5 | 65535) .1.3.6.1.4.1.2011.10.2.62.1.1.4 |
h3cdeNodeInitPacingWindowInitial pacing window size. This is the starting size of the
pacing window. DLSw uses an adaptive pacing flow control
algorithm that automatically adjusts to congestion levels in
the network. Pacing windows are used to control how many packets
may be sent to a peer before acknowlegement.
A value of 65535 indicates the value is meaningless.rw Integer32 (1..2000 | 65535) UNITS "packets" .1.3.6.1.4.1.2011.10.2.62.1.1.5 |
h3cdeNodeMaxPacingWindowMaximum pacing window size. This is the largest size that
the pacing window will grow to. DLSw uses an adaptive pacing
flow control algorithm that automatically adjusts to congestion
levels in the network. Pacing windows are used to control
how many packets may be sent to a peer before acknowlegement.rw Integer32 (1..2000 | 65535) UNITS "packets" .1.3.6.1.4.1.2011.10.2.62.1.1.6 |
h3cdeNodeKeepAliveIntervalDefault remote peer keepalive interval in seconds.
The keepalive parameter refers to how often DLSw peers
send peer keep alives to each other. These periodic messages
allow DLSw to keep track of the state of all peers.
If set to zero, no keepalives are sent.
A value of 65535 indicates the value is meaningless.rw Integer32 (0..2000 | 65535) UNITS "seconds" .1.3.6.1.4.1.2011.10.2.62.1.1.7 |
h3cdeNodePermitDynamicTo accept connections from non-configured remote peer when
permitDynamic is specified.rw Enumeration .1.3.6.1.4.1.2011.10.2.62.1.1.8 |
h3cdeNodeConnTimeoutDefine connected state timer.rw Integer32 .1.3.6.1.4.1.2011.10.2.62.1.1.9 |
h3cdeNodeLocalPendTimeoutDefine connected state timer.rw Integer32 .1.3.6.1.4.1.2011.10.2.62.1.1.10 |
h3cdeNodeRemotePendTimeoutDefine connected state timer.rw Integer32 .1.3.6.1.4.1.2011.10.2.62.1.1.11 |
h3cdeNodeSnaCacheTimeoutDefine connected state timer.rw Integer32 .1.3.6.1.4.1.2011.10.2.62.1.1.12 |
h3cdeNodeExplorerTimeoutDefine explorer timer.rw Integer32 .1.3.6.1.4.1.2011.10.2.62.1.1.13 |
h3cdeNodeExplorerWaitTimeoutDefine explorer waiting timer.rw Integer32 .1.3.6.1.4.1.2011.10.2.62.1.1.14 |
h3cdeNodeConfigSapListThe SAP list indicates which SAPs are allowed.
Only SAPs with even numbers are represented,
in the form of the most significant bit of the first
octet representing the SAP 0, the next most significant
bit representing the SAP 2, to the least significant
bit of the last octet representing the SAP 254. Data
link switching is allowed for those SAPs which have
one in its corresponding bit, not allowed otherwise.
The whole SAP list has to be changed together. Changing
the SAP list affects only new circuit establishments
and has no effect on established circuits.
This list can be used to restrict specific partners
from knowing about all the SAPs used by DLSw on all its
interfaces (these are represented in h3cdeIfSapList for
each interface). For instance, one may want to run NetBIOS
with some partners but not others.
If a node supports sending run-time capabilities exchange
messages, changes to this object should cause that action.
When to start the run-time capabilities exchange is
implementation-specific.
The DEFVAL below indicates support for SAPs 0, 2, 4, 6, 8, A, C and E.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.62.1.1.15 |
h3cdeNodeMaxTransmissionThe maximum retry times for TCP packet.
Default value is 5.rw Integer32 .1.3.6.1.4.1.2011.10.2.62.1.1.16 |
h3cdeNodeMulticastStatusMulticast support status. It is disabled by default.rw Enumeration .1.3.6.1.4.1.2011.10.2.62.1.1.17 |
h3cdeNodeMulticastAddressMulticast address. Default is 224.0.10.0.
When the h3cdeNodeMulticastStatus is disabled,
the multicast address is reset to 0.0.0.0.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.62.1.1.18 |
h3cdeNodeResetTcpAllReset all TCP circuit switch.
Any return value is meaningless.rw Enumeration .1.3.6.1.4.1.2011.10.2.62.1.1.19 |
h3cdeNodeStCapTcpNumTcp number reported in DLSw Capabilities Exchange.rw Integer32 .1.3.6.1.4.1.2011.10.2.62.1.1.20 |
h3cdeNodeTcpQueueMaxThe max length of TCP queue.rw Integer32 .1.3.6.1.4.1.2011.10.2.62.1.1.21 |
h3cdeTConn OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.62.1.2 |
h3cdeTConnConfigTableThis table defines the peer transport connections
that will be initiated or accepted by this DLSw.
This table augments dlswTConnConfigTable. SEQUENCE OF H3cdeTConnConfigEntry .1.3.6.1.4.1.2011.10.2.62.1.2.1 |
h3cdeTConnConfigEntryA list of objects that define specific configuration for
a DLSw peer transport connection. H3cdeTConnConfigEntry .1.3.6.1.4.1.2011.10.2.62.1.2.1.1 |
h3cdeTConnConfigVersionThis value identifies which version (first octet) and release
(second octet) of the DLSw standard is supported by this
partner DLSw. This information is obtained from a DLSw
Capabilities Exchange message received from the partner DLSw.
A string of zero length is returned before a Capabilities
Exchange message is received, or if one is never received.
A conceptual row with a h3cdeTConnOperState of 'connected' but
a zero length partner version indicates that the partner is
a non-standard DLSw partner.
If an implementation chooses to keep h3cdeTConnOperEntrys in
the 'disconnected' state, this value should remain unchanged.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.62.1.2.1.1.1 |
h3cdeTConnConfigPriorityThe priority for remote peer.rw Integer32 .1.3.6.1.4.1.2011.10.2.62.1.2.1.1.2 |
h3cdeTConnConfigLfSizeThe largest frame size.rw LFSize (DLSW-MIB) .1.3.6.1.4.1.2011.10.2.62.1.2.1.1.3 |
h3cdeTConnConfigKeepaliveIntvalThe keepalive interval value.rw Integer32 .1.3.6.1.4.1.2011.10.2.62.1.2.1.1.4 |
h3cdeTConnConfigBackupThe current remote peer is configured as the
backup of another configured remote peer.rw Enumeration .1.3.6.1.4.1.2011.10.2.62.1.2.1.1.5 |
h3cdeTConnConfigBackupTAddrIt is the ip address of a configured remote peer of which
the current remote peer is configrued as backup.rw TAddress (DLSW-MIB) .1.3.6.1.4.1.2011.10.2.62.1.2.1.1.6 |
h3cdeTConnConfigBackupLingerBackup peer linger.rw Integer32 .1.3.6.1.4.1.2011.10.2.62.1.2.1.1.7 |
h3cdeTConnOperTableA list of peer transport connections.
Each connected peer will create a conceptual row in the table.
When the peer disconnects, the row will be deleted from the table.
This table augments dlswTConnOperTable. SEQUENCE OF H3cdeTConnOperEntry .1.3.6.1.4.1.2011.10.2.62.1.2.2 |
h3cdeTConnOperEntryA list of objects that contain spefific operational
information for a DLSw peer transport connection. H3cdeTConnOperEntry .1.3.6.1.4.1.2011.10.2.62.1.2.2.1 |
h3cdeTConnOperPeerTypeThe current remote peer is configured when the value is 'configured'.ro Enumeration .1.3.6.1.4.1.2011.10.2.62.1.2.2.1.1 |
h3cdeTConnOperVendorIDThe value identifies the manufacturer's IEEE-assigned
Organizationally Unique Identifier (OUI) of remote peer.ro OCTET STRING .1.3.6.1.4.1.2011.10.2.62.1.2.2.1.2 |
h3cdeTConnOperVersionStringVersion information of remote peer. The length up to 512 bytes.ro OCTET STRING .1.3.6.1.4.1.2011.10.2.62.1.2.2.1.3 |
h3cdeTConnOperUpTimeThe amount of time (in seconds) since this transport
connection last entered the 'connected' state.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2011.10.2.62.1.2.2.1.4 |
h3cdeTConnOperMulticastAddressWhen remote peer supports DLSw2.0, this node identifies
its multicast address.ro TAddress (DLSW-MIB) .1.3.6.1.4.1.2011.10.2.62.1.2.2.1.5 |
h3cdeTConnOperStCapTcpNumberNumber of tcp supported when capabilities exchanging.ro Integer32 .1.3.6.1.4.1.2011.10.2.62.1.2.2.1.6 |
h3cdeTConnOperRecvPktsThe number of Switch-to-Switch Protocol (SSP) messages
received on this tcp transport connection.ro Counter32 .1.3.6.1.4.1.2011.10.2.62.1.2.2.1.7 |
h3cdeTConnOperSendPktsThe number of SSP messages
sent on this tcp transport connection.ro Counter32 .1.3.6.1.4.1.2011.10.2.62.1.2.2.1.8 |
h3cdeTConnOperDropPktsThe number of SSP messages
dropped on this tcp transport connection.ro Counter32 .1.3.6.1.4.1.2011.10.2.62.1.2.2.1.9 |
h3cdeTConnTcpConfigTableThis table defines the TCP transport connections that
will be either initiated by or accepted by this DSLw.
It augments the entries in dlswTConnConfigTable whose
domain is dlswTCPDomain. In other words for each conceptual row
in the dlswTConnConfigTable, if the dlswTConnConfigTDomain is
dlswTCPDomain, that conceptual row will be augmented by this
table.
dlswTCPDomain, dlswTConnConfigTable, and dlswTConnConfigTDomain
are all imported from DLSW-MIB (RFC 2024).
This table augments dlswTConnTcpConfigTable. SEQUENCE OF H3cdeTConnTcpConfigEntry .1.3.6.1.4.1.2011.10.2.62.1.2.3 |
h3cdeTConnTcpConfigEntryA list of objects that define specific configuration for
a DLSw peer transport connection within the dlswTCPDomain.
dlswTCPDomain is imported from DLSW-MIB (RFC 2024). H3cdeTConnTcpConfigEntry .1.3.6.1.4.1.2011.10.2.62.1.2.3.1 |
h3cdeTConnTcpConfigQueueMaxMaximum output TCP queue size for this remote peer.
For DLSw over TCP encapsulation, packets may be queued
due to congestion of the TCP network. This variable
is used to set the output queue maximum of the underlying
TCP connection for the peer represented by the conceptual row.rw Integer32 .1.3.6.1.4.1.2011.10.2.62.1.2.3.1.1 |
h3cdeBridge OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.62.1.3 |
h3cdeBridgeTableA list of bridge group which is serving for DLSw. SEQUENCE OF H3cdeBridgeEntry .1.3.6.1.4.1.2011.10.2.62.1.3.1 |
h3cdeBridgeEntryA list of bridge information. H3cdeBridgeEntry .1.3.6.1.4.1.2011.10.2.62.1.3.1.1 |
h3cdeBridgeNumIndexThis value identifies the bridge number. Integer32 .1.3.6.1.4.1.2011.10.2.62.1.3.1.1.1 |
h3cdeBridgeRowStatusRowStatus.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.62.1.3.1.1.2 |
h3cdeBridgeIfTableThe list of interface on which DLSw is active. SEQUENCE OF H3cdeBridgeIfEntry .1.3.6.1.4.1.2011.10.2.62.1.3.2 |
h3cdeBridgeIfEntryThe list of bridge interface information. H3cdeBridgeIfEntry .1.3.6.1.4.1.2011.10.2.62.1.3.2.1 |
h3cdeBridgeIfBrgGrpThis value identifies the bridge number attached
to the interface.rw Integer32 .1.3.6.1.4.1.2011.10.2.62.1.3.2.1.1 |
h3cdeBridgeIfRowStatusRowStatus.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.62.1.3.2.1.2 |
h3cdeQllc OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.62.1.4 |
h3cdeQllcTableThe table defines attributes related for those
QLLC that participate in data link switching. SEQUENCE OF H3cdeQllcEntry .1.3.6.1.4.1.2011.10.2.62.1.4.1 |
h3cdeQllcEntryThe ifIndex belongs to the interface which link protocol is x.25. H3cdeQllcEntry .1.3.6.1.4.1.2011.10.2.62.1.4.1.1 |
h3cQllcX121AddressX.121 address.rw Integer32 .1.3.6.1.4.1.2011.10.2.62.1.4.1.1.1 |
h3cQllcLocalMacThe virtual MAC address used to represent the QLLC-attached
link station to the rest of the DLSw network.rw MacAddressNC (DLSW-MIB) .1.3.6.1.4.1.2011.10.2.62.1.4.1.1.2 |
h3cQllcLocalSapThe SAP used to represent this link station.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.62.1.4.1.1.3 |
h3cQllcRemoteMacThe MAC address to which DLSw should attempt to connect
this link station. If this information is not available,
a length of zero for this object should be returned.rw MacAddressNC (DLSW-MIB) .1.3.6.1.4.1.2011.10.2.62.1.4.1.1.4 |
h3cQllcRemoteSapThe SAP of the remote station to which this link
station should be connected. If this information
is not available, a length of zero for this object
should be returned.rw OCTET STRING .1.3.6.1.4.1.2011.10.2.62.1.4.1.1.5 |
h3cQllcRowStatusRowStatus.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.62.1.4.1.1.6 |
h3cdeSdlc OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.62.1.5 |
h3cdeSdlcPortTableThe table defines parameters for the interfaces
whose link protocol is SDLC. SEQUENCE OF H3cdeSdlcPortEntry .1.3.6.1.4.1.2011.10.2.62.1.5.1 |
h3cdeSdlcPortEntrySdlc port entry. H3cdeSdlcPortEntry .1.3.6.1.4.1.2011.10.2.62.1.5.1.1 |
h3cdeSdlcPortRoleThe SDLC role of interface.rw Enumeration .1.3.6.1.4.1.2011.10.2.62.1.5.1.1.1 |
h3cdeSdlcPortSendWindowSize of local send window.rw Integer32 .1.3.6.1.4.1.2011.10.2.62.1.5.1.1.2 |
h3cdeSdlcPortModuloSize of modulus.rw Enumeration .1.3.6.1.4.1.2011.10.2.62.1.5.1.1.3 |
h3cdeSdlcPortMaxPduMaximum bytes for incoming frames.rw Integer32 .1.3.6.1.4.1.2011.10.2.62.1.5.1.1.4 |
h3cdeSdlcPortMaxSendQueueSize of hold queue.rw Integer32 .1.3.6.1.4.1.2011.10.2.62.1.5.1.1.5 |
h3cdeSdlcPortMaxTransmissionNumber of times to retry an operation.rw Integer32 .1.3.6.1.4.1.2011.10.2.62.1.5.1.1.6 |
h3cdeSdlcPortSimultaneousEnableActivate SDLC two-way simultaneous mode.rw Enumeration .1.3.6.1.4.1.2011.10.2.62.1.5.1.1.7 |
h3cdeSdlcPortTimerACKTime to wait for a reply to a frame.rw Integer32 .1.3.6.1.4.1.2011.10.2.62.1.5.1.1.8 |
h3cdeSdlcPortTimerLifeTimeTime to wait for a reply used by secondary station.rw Integer32 .1.3.6.1.4.1.2011.10.2.62.1.5.1.1.9 |
h3cdeSdlcPortTimerPollPauseTime between polls for each secondary SDLC station.rw Integer32 .1.3.6.1.4.1.2011.10.2.62.1.5.1.1.10 |
h3cdeSdlcPortRowStatusRowStatus.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.62.1.5.1.1.11 |
h3cdeLlc2 OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.62.1.6 |
h3cdeLlc2PortTableThis table defines parameters for the Ethernet interface. SEQUENCE OF H3cdeLlc2PortEntry .1.3.6.1.4.1.2011.10.2.62.1.6.1 |
h3cdeLlc2PortEntryLLC2 port entry. H3cdeLlc2PortEntry .1.3.6.1.4.1.2011.10.2.62.1.6.1.1 |
h3cdeLlc2PortMaxAckMaximum of I-frames received before ACK.rw Integer32 .1.3.6.1.4.1.2011.10.2.62.1.6.1.1.1 |
h3cdeLlc2PortMaxPduMaximum of LLC2 pdu length.rw Integer32 .1.3.6.1.4.1.2011.10.2.62.1.6.1.1.2 |
h3cdeLlc2PortMaxSendQueueQueue for sending llc2 I-frames.rw Integer32 .1.3.6.1.4.1.2011.10.2.62.1.6.1.1.3 |
h3cdeLlc2PortMaxTransmissionRetry times of operations.rw Integer32 .1.3.6.1.4.1.2011.10.2.62.1.6.1.1.4 |
h3cdeLlc2PortModuloModulus of LLC2.rw Enumeration .1.3.6.1.4.1.2011.10.2.62.1.6.1.1.5 |
h3cdeLlc2PortReceiveWindowMaximum number of I-frames to send before received ACK.rw Integer32 .1.3.6.1.4.1.2011.10.2.62.1.6.1.1.6 |
h3cdeLlc2PortTimerAckWaiting for ACK time after sending an I-frame.rw Integer32 .1.3.6.1.4.1.2011.10.2.62.1.6.1.1.7 |
h3cdeLlc2PortTimerAckDelayMaximum time allows I-frames incoming without replay ACK.rw Integer32 .1.3.6.1.4.1.2011.10.2.62.1.6.1.1.8 |
h3cdeLlc2PortTimerDetectDetect the link status.rw Integer32 .1.3.6.1.4.1.2011.10.2.62.1.6.1.1.9 |
h3cdeLlc2PortTimerBusyWaiting time while other LLC2 station is in busy state.rw Integer32 .1.3.6.1.4.1.2011.10.2.62.1.6.1.1.10 |
h3cdeLlc2PortTimerPollWaiting time after a P frame is sent.rw Integer32 .1.3.6.1.4.1.2011.10.2.62.1.6.1.1.11 |
h3cdeLlc2PortTimerRejectWaiting time after a REJ frame is sent.rw Integer32 .1.3.6.1.4.1.2011.10.2.62.1.6.1.1.12 |
h3cdeLlc2PortRowStatusRowStatus.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.62.1.6.1.1.13 |
h3cdeReachableCache OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.62.1.7 |
h3cdeRchCacheStat OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.62.1.7.1 |
h3cdeRchCacheMaxIndexMaximum of h3cdeRchCacheIndex.ro Integer32 .1.3.6.1.4.1.2011.10.2.62.1.7.1.1 |
h3cdeRchCacheNextIndexThe next value of h3cdeRchCacheIndex to be assigned by
the agent. A retrieval of this object atomically reserves
the returned value for use by the manager to create a row
in h3cdeRchCacheTable. This makes it possible for the agent
to control the index space of the MAC address cache, yet
allows the manager to administratively create new rows.ro Integer32 .1.3.6.1.4.1.2011.10.2.62.1.7.1.2 |
h3cdeRchCacheTableReachable cache table. SEQUENCE OF H3cdeRchCacheEntry .1.3.6.1.4.1.2011.10.2.62.1.7.3 |
h3cdeRchCacheEntryReachable cache entry. H3cdeRchCacheEntry .1.3.6.1.4.1.2011.10.2.62.1.7.3.1 |
h3cdeRchCacheIndexIndex of reachable cache entry. Integer32 .1.3.6.1.4.1.2011.10.2.62.1.7.3.1.1 |
h3cdeRchCacheStatusCurrent status of reachable cache entry.ro Enumeration .1.3.6.1.4.1.2011.10.2.62.1.7.3.1.2 |
h3cdeRchCacheRemainTimeRemain time of reachable cache entry.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.2011.10.2.62.1.7.3.1.3 |
h3cdeRchCacheMacMAC address of reachable cache entry.rw MacAddressNC (DLSW-MIB) .1.3.6.1.4.1.2011.10.2.62.1.7.3.1.4 |
h3cdeRchCacheRemoteIpAddrTypeRemote peer ip address type.rw InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.62.1.7.3.1.5 |
h3cdeRchCacheRemoteIpRemote peer ip address of reachable cache entry.rw InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.2011.10.2.62.1.7.3.1.6 |
h3cdeRchCacheRowStatusRowStatus.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.62.1.7.3.1.7 |
h3cdeEthernetBackup OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.62.1.8 |
h3cdeEBMacMapStat OBJECT IDENTIFIER .1.3.6.1.4.1.2011.10.2.62.1.8.1 |
h3cdeEBMacMapMaxIndexMaximum of h3cdeEBMacMapIndex.ro Integer32 .1.3.6.1.4.1.2011.10.2.62.1.8.1.1 |
h3cdeEBMacMapNextIndexThe next value of h3cdeEBMacMapIndex to be assigned by
the agent. A retrieval of this object atomically reserves
the returned value for use by the manager to create a row
in h3cdeEBMacMapTable. This makes it possible for the agent
to control the index space of the MAC mapping tables, yet
allows the manager to administratively create new rows.ro Integer32 .1.3.6.1.4.1.2011.10.2.62.1.8.1.2 |
h3cdeEBIfTableInformation of interface which works for DLSw Ethernet redundancy. SEQUENCE OF H3cdeEBIfEntry .1.3.6.1.4.1.2011.10.2.62.1.8.3 |
h3cdeEBIfEntryParameters defined for DLSw Ethernet redundancy interface. H3cdeEBIfEntry .1.3.6.1.4.1.2011.10.2.62.1.8.3.1 |
h3cdeEBMulticastMacMulticast MAC address configured for the Ethernet
redundancy of dlsw module. When Ethernet redundancy
is inactive, its value is '000000000000'H.
To active Ethernet redundancy, give it a valid multicast MAC address.rw MacAddressNC (DLSW-MIB) .1.3.6.1.4.1.2011.10.2.62.1.8.3.1.1 |
h3cdeEBPriorityPriority configured for the Ethernet redundancy of DLSw module.rw Integer32 .1.3.6.1.4.1.2011.10.2.62.1.8.3.1.2 |
h3cdeEBtimerTimer for the Ethernet redundancy of DLSw module.rw Integer32 .1.3.6.1.4.1.2011.10.2.62.1.8.3.1.3 |
h3cdeEBRowStatusRowStatus.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.62.1.8.3.1.4 |
h3cdeEBMacMapTableMAC address mapping table. SEQUENCE OF H3cdeEBMacMapEntry .1.3.6.1.4.1.2011.10.2.62.1.8.4 |
h3cdeEBMacMapEntryMAC address mapping entry. H3cdeEBMacMapEntry .1.3.6.1.4.1.2011.10.2.62.1.8.4.1 |
h3cdeEBMacMapIndexIndex of MAC address mapping entry. Integer32 .1.3.6.1.4.1.2011.10.2.62.1.8.4.1.1 |
h3cdeEBMacMapLocalMacLocal MAC address in MAC address mapping.
When creating a new conceptual row, h3cdeEBMacMapLocalMac
and h3cdeEBMacMapRemoteMac should be set simultaneously.rw MacAddressNC (DLSW-MIB) .1.3.6.1.4.1.2011.10.2.62.1.8.4.1.2 |
h3cdeEBMacMapRemoteMacRemote MAC address of MAC address mapping.
When creating a new conceptual row, h3cdeEBMacMapLocalMac
and h3cdeEBMacMapRemoteMac should be set simultaneously.rw MacAddressNC (DLSW-MIB) .1.3.6.1.4.1.2011.10.2.62.1.8.4.1.3 |
h3cdeEBMacMapNeighbourNeighbour of MAC address mapping.rw MacAddressNC (DLSW-MIB) .1.3.6.1.4.1.2011.10.2.62.1.8.4.1.4 |
h3cdeEBMacMapRowStatusStatus of MAC address mapping entry.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2011.10.2.62.1.8.4.1.5 |