H323-DS1-MIB
The MIB module for entities implementing the xxxx protocol.
Main OID:
h323DS1.1.3.6.1.4.1.1751.1.1198.3.1
17
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
17 total| Object Name |
|---|
lucent OBJECT IDENTIFIER .1.3.6.1.4.1.1751 |
RFC1155-SMI Unknown .1.3.6.1.4.1.1751 |
products OBJECT IDENTIFIER .1.3.6.1.4.1.1751.1 |
softSwitch OBJECT IDENTIFIER .1.3.6.1.4.1.1751.1.1198 |
h323DeviceServer OBJECT IDENTIFIER .1.3.6.1.4.1.1751.1.1198.3 |
h323Traps OBJECT IDENTIFIER .1.3.6.1.4.1.1751.1.1198.3.0 |
h323DS1The MIB module for entities implementing the xxxx
protocol. MODULE-IDENTITY .1.3.6.1.4.1.1751.1.1198.3.1 |
h323System OBJECT IDENTIFIER .1.3.6.1.4.1.1751.1.1198.3.1.1 |
dsInfoDevice Server information. This value should
include the full name and version identification
and/or manufacturer information. It is mandatory
that this contains only printable ASCII charactersro DisplayString .1.3.6.1.4.1.1751.1.1198.3.1.1.1 |
dsProtocolInfoDevice Server H323/SIP stack information. This
value should include the full name and version
identification and/or manufacturer information of
the H323/SIP Stack used in the device server implementation.
It is mandatory that this contains only printable ASCII
charactersro DisplayString .1.3.6.1.4.1.1751.1.1198.3.1.1.2 |
logLevelDevice Server Log Level. A minimum logging level is
always set for the device servers, which logs errors
and warnings. If still more verbosity is required, that
can be done by setting this parameter to a required level.
1. Error
2. Warning
3. Info
. .rw INTEGER ( 1..3 ) .1.3.6.1.4.1.1751.1.1198.3.1.1.3 |
succeededCallsTotal number of calls successfully made since the last
uptime of this device server.ro INTEGER ( 0..65535 ) .1.3.6.1.4.1.1751.1.1198.3.1.1.4 |
activeCallsNumber of calls which are still progressing at this time
by this device serverro INTEGER ( 0..65535 ) .1.3.6.1.4.1.1751.1.1198.3.1.1.5 |
failedCallsTotal Number of calls failed since the last uptime of
this device serverro INTEGER ( 0..65535 ) .1.3.6.1.4.1.1751.1.1198.3.1.1.6 |
reloadConfigThis is to tell the device server to load it's
configuration again. This is done when some configuration
parameters need to be updated in the systemrw INTEGER ( 0..65535 ) .1.3.6.1.4.1.1751.1.1198.3.1.1.7 |
gatewayDeleteInforms the device server to delete the entry of the
gateway from the configuration filerw INTEGER( 1.. 65535) .1.3.6.1.4.1.1751.1.1198.3.1.1.8 |
resetLogTo discard previous log and to start logging afresh
resetLog would be usedrw INTEGER .1.3.6.1.4.1.1751.1.1198.3.1.1.9 |
More MIBs from Lucents Concord Technology Center (CTC)
Browse all Lucents Concord Technology Center (CTC)MIBs →ACMIB
The ACMIB module enables SNMP-based monitoring and management of Lucent Access Concentrator hardware running Release 6.2, specifically tracking interface status, port statistics, and system resource utilization for legacy DSLAM and access node deployments.
3222 objects→
EXCEL-SWITCH-MIB
SNMP MIB module
473 objects→
EXCEL3-SWITCH-MIB
SNMP MIB module
365 objects→
EXCEL4-SWITCH-MIB
SNMP MIB module
365 objects→
EXCEL2-SWITCH-MIB
SNMP MIB module
365 objects→
EXCEL1-SWITCH-MIB
SNMP MIB module
365 objects→