GBNPlatformOAMSntpClient-MIB
The GBNPlatformOAMSntpClient-MIB provides management interfaces for configuring and monitoring Simple Network Time Protocol (SNTP) client operations on GBN platform devices, specifically exposing synchronization status, server association states, and time offset metrics.
Imported Objects
Objects
28 total| Object Name |
|---|
gbnPlatformOAMSntpClientSNTP mib definition. MODULE-IDENTITY .1.3.6.1.4.1.13464.1.2.1.1.8 |
sntpClientGeneral OBJECT IDENTIFIER .1.3.6.1.4.1.13464.1.2.1.1.8.1 |
sntpClientModeSNTP client workrw Enumeration .1.3.6.1.4.1.13464.1.2.1.1.8.1.1 |
sntpClientPollIntervalSend the request interval, for unicast and broadcast any wayrw INTEGER( 64..1024 ) .1.3.6.1.4.1.13464.1.2.1.1.8.1.2 |
sntpClientRetransIntervalClient request retransmission intervalrw INTEGER( 1..30 ) .1.3.6.1.4.1.13464.1.2.1.1.8.1.3 |
sntpClientRetransTimesClient does not receive the response, the number of retransmission requests for unicast and broadcast any wayrw INTEGER( 0..10 ) .1.3.6.1.4.1.13464.1.2.1.1.8.1.4 |
sntpClientServerAre using the server address for the unicast and broadcast any way.rw IpAddress .1.3.6.1.4.1.13464.1.2.1.1.8.1.5 |
sntpClientSynthFlagWhether the time the client is synchronized.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.1.1.8.1.6 |
sntpClientStateThe current state of the client, idle state or wait for a response message status.ro INTEGER .1.3.6.1.4.1.13464.1.2.1.1.8.1.7 |
sntpClientLastSynthTimeThe last time the client synchronized time.ro Integer32 .1.3.6.1.4.1.13464.1.2.1.1.8.1.8 |
sntpClientLastSynthErrnoIf the client fails the last time synchronization error code.ro INTEGER .1.3.6.1.4.1.13464.1.2.1.1.8.1.9 |
sntpClientAdminStatusClients open and closed.rw Enumeration .1.3.6.1.4.1.13464.1.2.1.1.8.1.10 |
sntpClientBcastDelayWorking in broadcast client mode, the estimated transmission delay (milliseconds).rw INTEGER ( 1..9999 ) .1.3.6.1.4.1.13464.1.2.1.1.8.1.11 |
sntpClientMcastTtlWork in multicast client mode, the TTL value.rw INTEGER ( 1..255 ) .1.3.6.1.4.1.13464.1.2.1.1.8.1.12 |
sntpClientAuthFlagauthentication enable flagrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.1.1.8.1.13 |
sntpClientUniKeyIDin client/server mode, client send request with this keyIDrw Unsigned32 .1.3.6.1.4.1.13464.1.2.1.1.8.1.14 |
sntpClientAnyKeyIDin anycast mode, client send request with this keyIDrw Unsigned32 .1.3.6.1.4.1.13464.1.2.1.1.8.1.15 |
sntpClientValidServerTableLegitimate server segment table, SNTP packets according to time table to check the source address, only the source address is located in this newspaper literary talent in this table as legitimate messages, or discarded. Equivalent to access control lists. SEQUENCE OF SntpClientValidServerEntry .1.3.6.1.4.1.13464.1.2.1.1.8.2 |
sntpClientValidServerEntryDefinition of a legitimate server list. SntpClientValidServerEntry .1.3.6.1.4.1.13464.1.2.1.1.8.2.1 |
sntpClientValidServerNetSource address of the subnet number.ro IpAddress .1.3.6.1.4.1.13464.1.2.1.1.8.2.1.1 |
sntpClientValidServerMaskSource address of the subnet mask.ro IpAddress .1.3.6.1.4.1.13464.1.2.1.1.8.2.1.2 |
sntpClientValidServerRowStatusLine state.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.1.1.8.2.1.3 |
sntpAuthKeyTablekeys userd for SNTP authentication SEQUENCE OF SntpAuthKeyEntry .1.3.6.1.4.1.13464.1.2.1.1.8.3 |
sntpAuthKeyEntrydefine a key item. SntpAuthKeyEntry .1.3.6.1.4.1.13464.1.2.1.1.8.3.1 |
sntpAuthKeyIdkey numberro Unsigned32 ( 1..4294967295 ) .1.3.6.1.4.1.13464.1.2.1.1.8.3.1.1 |
sntpAuthKeyValuekey valuerw DisplayString .1.3.6.1.4.1.13464.1.2.1.1.8.3.1.2 |
sntpAuthKeyTrustFlagwhether the key is trustedrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.1.1.8.3.1.3 |
sntpAuthKeyRowStatusrow statusrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.1.1.8.3.1.4 |
More MIBs from Admin
Browse all AdminMIBs →The NSCRTV-PON-TREE-EXT-MIB extends the standard PON tree monitoring capabilities to track specific optical network unit (ONU) status, optical power levels, and bandwidth allocation metrics for Next-Generation Passive Optical Network (NG-PON2) or XGS-PON infrastructure. This module enables granular visibility into the physical layer topology and performance statistics of the PON tree segment, facilitating fault isolation and capacity planning for the optical distribution network.
The GBNL2QACL-MIB module provides management interfaces for QTECH enterprise Layer 2 switches to monitor and configure Quality of Service (QoS) queueing parameters and Access Control List (ACL) statistics. It enables the retrieval of specific metrics regarding traffic classification, queue depths, drop counters, and ACL hit rates for policy enforcement validation.
SNMP MIB module
The GBNPlatformOAM-MIB module facilitates the monitoring and management of GBN (Gigabit Broadband Network) platform operations, administration, and maintenance functions, specifically tracking device health status, interface states, and system resource utilization across GBN enterprise hardware.
The GBNPlatformGNLink-MIB module provides the management interface for ZyXEL's ZY.Link enterprise platform, specifically enabling the monitoring of gateway link states, interface statistics, and network topology elements. It facilitates the retrieval of operational metrics such as link status, throughput counters, and error rates for ZY.Link gateway devices via SNMP.
SNMP MIB module