GBNDevicePoe-MIB
The GBNDevicePoe-MIB module facilitates the monitoring and management of Power over Ethernet (PoE) status, power allocation, and port-level electrical parameters on GBN enterprise networking hardware. It provides specific metrics for PoE power consumption, port enablement states, and fault detection to ensure reliable power delivery to connected endpoints.
Imported Objects
Objects
28 total| Object Name |
|---|
gbnDevicePoeGbn Common Enterprise MIB definition. MODULE-IDENTITY .1.3.6.1.4.1.13464.1.2.2.4 |
poePowerSupplyTableA table of power supply. SEQUENCE OF PoePowerSupplyEntry .1.3.6.1.4.1.13464.1.2.2.4.2 |
poePowerSupplyEntryA table of power supply. PoePowerSupplyEntry .1.3.6.1.4.1.13464.1.2.2.4.2.1 |
powerindexunit index, start from 1ro Integer32 .1.3.6.1.4.1.13464.1.2.2.4.2.1.1 |
poeVersionA string of poe firmware.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.2.4.2.1.2 |
powerstatusdescriptions of power supplyro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.2.4.2.1.3 |
poeDevicePowerLimitpower limit of device.unit is Wattrw Integer32 .1.3.6.1.4.1.13464.1.2.2.4.2.1.4 |
poeDevicePowerConsumepower consumption of device.unit is Wattro Integer32 .1.3.6.1.4.1.13464.1.2.2.4.2.1.5 |
poePortTableA table of poe port. SEQUENCE OF PoePortEntry .1.3.6.1.4.1.13464.1.2.2.4.4 |
poePortEntryA table of poe port. PoePortEntry .1.3.6.1.4.1.13464.1.2.2.4.4.1 |
portIndexport index, start from 1ro Integer32 .1.3.6.1.4.1.13464.1.2.2.4.4.1.1 |
powerlimitpower limit of port.unit is mWrw Integer32 .1.3.6.1.4.1.13464.1.2.2.4.4.1.2 |
powerConsumepower consumption of port.unit is mWro Integer32 .1.3.6.1.4.1.13464.1.2.2.4.4.1.3 |
poePdPortTableA table of poe port. SEQUENCE OF PoePdPortEntry .1.3.6.1.4.1.13464.1.2.2.4.5 |
poePdPortEntryA table of poe port. PoePdPortEntry .1.3.6.1.4.1.13464.1.2.2.4.5.1 |
portPdIndexport index, start from 1ro Integer32 .1.3.6.1.4.1.13464.1.2.2.4.5.1.1 |
portPoePdEnablepoe feedback real time port enable state.unit is mWro Integer32 .1.3.6.1.4.1.13464.1.2.2.4.5.1.2 |
portPoePdConfigpoe feedback config port enable.unit is mWrw Integer32 .1.3.6.1.4.1.13464.1.2.2.4.5.1.3 |
poeFanControlTableA table of poe fan set. SEQUENCE OF PoeFanControlEntry .1.3.6.1.4.1.13464.1.2.2.4.6 |
poeFanControlEntryA table of poe fan set. PoeFanControlEntry .1.3.6.1.4.1.13464.1.2.2.4.6.1 |
poeFandefaultpoe fans' mode set or get.ro Enumeration .1.3.6.1.4.1.13464.1.2.2.4.6.1.1 |
poeFanlowVaulepoe fan-control low-temperaturerw Integer32 .1.3.6.1.4.1.13464.1.2.2.4.6.1.2 |
poeFanmiddleVaulepoe fan-control middle-temperaturerw Integer32 .1.3.6.1.4.1.13464.1.2.2.4.6.1.3 |
poeFanhighVaulepoe fan-control high-temperaturerw Integer32 .1.3.6.1.4.1.13464.1.2.2.4.6.1.4 |
poeFanModeSetpoe fan-control user defined setrw Enumeration .1.3.6.1.4.1.13464.1.2.2.4.6.1.5 |
poeFan1Speedthe fan1 speed of the switchro Integer32 .1.3.6.1.4.1.13464.1.2.2.4.6.1.6 |
poeFan2Speedthe fan2 speed of the switchro Integer32 .1.3.6.1.4.1.13464.1.2.2.4.6.1.7 |
poeTemperaturethe temperture of the switchro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.13464.1.2.2.4.6.1.8 |
More MIBs from Admin
Browse all AdminMIBs →The NSCRTV-PON-TREE-EXT-MIB extends the standard PON tree monitoring capabilities to track specific optical network unit (ONU) status, optical power levels, and bandwidth allocation metrics for Next-Generation Passive Optical Network (NG-PON2) or XGS-PON infrastructure. This module enables granular visibility into the physical layer topology and performance statistics of the PON tree segment, facilitating fault isolation and capacity planning for the optical distribution network.
The GBNL2QACL-MIB module provides management interfaces for QTECH enterprise Layer 2 switches to monitor and configure Quality of Service (QoS) queueing parameters and Access Control List (ACL) statistics. It enables the retrieval of specific metrics regarding traffic classification, queue depths, drop counters, and ACL hit rates for policy enforcement validation.
SNMP MIB module
The GBNPlatformOAM-MIB module facilitates the monitoring and management of GBN (Gigabit Broadband Network) platform operations, administration, and maintenance functions, specifically tracking device health status, interface states, and system resource utilization across GBN enterprise hardware.
The GBNPlatformGNLink-MIB module provides the management interface for ZyXEL's ZY.Link enterprise platform, specifically enabling the monitoring of gateway link states, interface statistics, and network topology elements. It facilitates the retrieval of operational metrics such as link status, throughput counters, and error rates for ZY.Link gateway devices via SNMP.
SNMP MIB module