G700-MG-MIB
A MIB to support the Avaya G700 Media Gateway.
Main OID:
cmgmib.1.3.6.1.4.1.6889.2.9.1
365
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
365 total| Object Name |
|---|
avaya OBJECT IDENTIFIER .1.3.6.1.4.1.6889 |
products OBJECT IDENTIFIER .1.3.6.1.4.1.6889.1 |
g700MediaGateway OBJECT IDENTIFIER .1.3.6.1.4.1.6889.1.9 |
mibs OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2 |
g700MediaGatewayMIB OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.9 |
cmgmibA MIB to support the Avaya G700 Media Gateway. MODULE-IDENTITY .1.3.6.1.4.1.6889.2.9.1 |
cmgChassis OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.9.1.1 |
cmgHWTypeIndicates the type of component. Where 'media-gateway' refers to G700ro Enumeration .1.3.6.1.4.1.6889.2.9.1.1.1 |
cmgModelNumberModel number of this component.ro DisplayString .1.3.6.1.4.1.6889.2.9.1.1.2 |
cmgDescriptionDescription of this component: G700 Media Gateway.ro DisplayString .1.3.6.1.4.1.6889.2.9.1.1.3 |
cmgSerialNumberSerial number of this gateway.ro DisplayString .1.3.6.1.4.1.6889.2.9.1.1.4 |
cmgHWVintageHardware version of this gateway.ro DisplayString .1.3.6.1.4.1.6889.2.9.1.1.5 |
cmgHWSuffixHardware vintage suffix of this gateway.ro DisplayString .1.3.6.1.4.1.6889.2.9.1.1.6 |
cmgStackPositionPosition of this media gateway in the Cajun stack,
counting from the bottom of the stack.ro INTEGER .1.3.6.1.4.1.6889.2.9.1.1.7 |
cmgModuleListList of the physical media modules installed in this gateway.
Meaning of each octet is as follows.
1 Number of slots; in the G700 Media Gateway this is
always 4.
2 Type of slot identifier; in the G700 Media Gateway
this is always integer(2).
3-4 Length of each field in the following sequence; in the
G700 Media Gateway this is always 1.
5-14 Module type ids in slot order, 1 - 10. Values are
defined below for cmgModuleType, or none(0) if no
module is installed.
none(0),
t1e1-voip(1),
bri(2),
dcp(3),
analog(4),
t1e1(5),
voip(6),
icc(7),
fxo4fxs4(9),
bri2(10),
ds1wan(11),
uspwan(12),
dcp24hd(13),
poe24(14),
g350intana(16),
dcp24(17),
fxs24(18),
g250-int-analog-2L4T(19),
g250-int-analog-2L1T(20),
g250-int-BRI(21),
g250-int-DS1(24),
g250-int-12pDCP(23),
poe40(22),
poe24cr(25),
poe8(26),
tgm550-int-analog-2L2T(30),
tim514(31),
tim510(32),
tim521(33),
avayaAM110ApplicationModule(34),
g450Mainboard(40),
tim508(41),
tim516(42),
tim518(43),
i120-intana(44),
i40-int-analog-2L4T(45),
i40-int-analog-2L1T(46),
i40-int-BRI(47),
i40-int-DS1(48),
i40-A14-int-analog-6L8T(49),
avayaCommunicationManagerBranchEditionG450Mainboard(50),
g430Mainboard(51),
unknown(255)ro OCTET STRING .1.3.6.1.4.1.6889.2.9.1.1.8 |
cmgResetSetting the value of this attribute to ON is interpreted as
a reset command for the whole chassis. It initiates a complete
reinitialisation of the chassis and of all the devices
incorporated inside the chassis.rw Enumeration .1.3.6.1.4.1.6889.2.9.1.1.9 |
cmgHardware OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.9.1.1.10 |
cmgCpuTempReading of the internal temperature sensor at the CPU,
expressed in degrees Celsius.ro Integer32 .1.3.6.1.4.1.6889.2.9.1.1.10.1 |
cmgCpuTempWarningThreshInternal enclosure temperature warning threshold, expressed in degrees
Celsius. When the temperature at the CPU sensor exceeds the threshold,
a trap is sent to the management console. If both CPU and DSP sensors
exceed their thresholds, only one trap is sent.ro Integer32 .1.3.6.1.4.1.6889.2.9.1.1.10.2 |
cmgCpuTempShutdownThreshInternal enclosure temperature shutdown threshold, expressed in degrees
Celsius. When the temperature at the CPU sensor exceeds the threshold,
a trap is sent to the management console and the media gateway begins
a controlled shutdown.ro Integer32 .1.3.6.1.4.1.6889.2.9.1.1.10.3 |
cmgDspTempReading of the internal temperature sensor at the DSPs,
expressed in degrees Celsius.ro Integer32 .1.3.6.1.4.1.6889.2.9.1.1.10.4 |
cmgDspTempWarningThreshInternal enclosure temperature warning threshold, expressed in degrees
Celsius. When the temperature at the DSP sensor exceeds the threshold,
a trap is sent to the management console. If both CPU and DSP sensors
exceed their thresholds, only one trap is sent.ro Integer32 .1.3.6.1.4.1.6889.2.9.1.1.10.5 |
cmgDspTempShutdownThreshInternal enclosure temperature shutdown threshold, expressed in degrees
Celsius. When the temperature at the DSP sensor exceeds the threshold,
a trap is sent to the management console and the media gateway begins
a controlled shutdown.ro Integer32 .1.3.6.1.4.1.6889.2.9.1.1.10.6 |
cmgPowerMgProcessorVoltage reading in millivolts at the power supply serving the Media
Gateway main processor. Nominal value is +5100 mV. If the reading
falls outside the range 4950 to 5250 mV, a trap is sent to the
management console and the corresponding bit in the fault mask
is turned on.ro Integer32 .1.3.6.1.4.1.6889.2.9.1.1.10.7 |
cmgPowerMediaModulesVoltage reading in millivolts at the power supply serving the Media
Modules. Nominal value is -48000 mV. If the reading falls outside
the range -43000 to -53000 mV, a trap is sent to the management
console and the corresponding bit in the fault mask is turned on.ro Integer32 .1.3.6.1.4.1.6889.2.9.1.1.10.8 |
cmgPowerVoipComplexVoltage reading in millivolts at the power supply serving the VoIP
complexes. Nominal value is +3400 mV. If the reading falls outside
the range 3200 to 3600 mV, a trap is sent to the management console
and the corresponding bit in the fault mask is turned on.ro Integer32 .1.3.6.1.4.1.6889.2.9.1.1.10.9 |
cmgPowerDspVoltage reading in millivolts at the power supply serving the DSP
units, derived from VoIP complex power. Nominal value is +1580 mV.
If the reading falls outside the range 1530 to 1620 mV, a trap is
sent to the management console and the corresponding bit in the
fault mask is turned on.ro Integer32 .1.3.6.1.4.1.6889.2.9.1.1.10.10 |
cmgPower8260Voltage reading in millivolts at the power supply serving the 8260
processor, derived from VoIP complex power. Nominal value is +2500
mV. If the reading falls outside the range 2430 to 2580 mV, a
trap is sent to the management console and the corresponding
bit in the fault mask is turned on.ro Integer32 .1.3.6.1.4.1.6889.2.9.1.1.10.11 |
cmgHardwareFaultMaskEach bit of this value set to '1' indicates a specific fault
in the module.
Octets are numbered in the order in which they appear in the PDU.
Bits are numbered from the most-significant leftmost bit in the
octet (bit 0) to the least-significant rightmost bit (bit 7).
Cajun numbering continues across octets, so that octet 1 bit 0 is
called bit 8 in the Cajun scheme. That number is also shown below,
with the octet value for each single bit set.
Octet 0 high-order 4 bits show fan status.
Octet 0 low-order 4 bits show temperature status.
Octet 1 shows power supply status.
Octet 2 shows other alarms.
Cajun Octet Octet
bit# /bit# value Meaning
- - -
0 0/0 0x80 Multiple fan warning: at least two fans have been operating
at less than 90% of their nominal speed for 5 minutes or
more. This may be an early warning of overheating.
1 0/1 0x40 PSU fan brief failure warning: the power supply fan has been
operating at less than 90% of its nominal speed for 10 minutes
or more, but less than 15 minutes. This may be an early
warning of overheating.
2 0/2 0x20 PSU fan prolonged failure warning: the power supply fan has
been operating at less than 90% of its nominal speed for 15
minutes or more. This may be an early warning of overheating.
3 0/3 Unused.
4 0/4 0x08 Temperature warning: cmgCpuTemp has exceeded its warning
threshold.
5 0/5 0x04 Temperature warning: cmgDspTemp has exceeded its warning
threshold.
6 0/6 Unused.
7 0/7 Power On Status Test failure -NCE, QUICC test failures on power up
8 1/0 0x80 The +5.1 v power supply to the MG processor is out of range.
9 1/1 0x40 The -48 v power supply to the media modules is out of range.
10 1/2 0x20 The +3.3 v power supply to the VoIP complexes is out of range.
11 1/3 0x10 The +1.58 v power supply to the DSP units is out of range.
12 1/4 0x08 The +2.5 v power supply to the 8260 processor is out of range.
13 1/5 0x04 The -48 v auxiliary power supply to the endpoints is out of
range.
14 1/6 0x02 The +12 v power supply to the fans is out of range.
15 1/7 Unused.
16 2/0 0x80 Clock synchronization signal is lost.
17 2/1 0x40 Clock synchronization signal warning. Only one clock
syncronization signal source remains.
18 2/2 0x20 Clock synchronization signal excessive switching.
19 2/3 0x10 TDM Test Expansion Box 1 Failure
20 2/4 0x08 TDM Test Expansion Box 2 Failure
21 2/5 0x04 PoE Power Supply Base Box Failure
22 2/6 0x02 PoE Power Supply Expansion Box 1 Failure
23 2/7 0x01 PoE Power Supply Expansion Box 2 Failurero OCTET STRING .1.3.6.1.4.1.6889.2.9.1.1.10.12 |
cmgHardwareStatusMaskEach bit of this value set to '1' indicates a specific status
condition in the module.
Octets are numbered in the order in which they appear in the PDU.
Bits are numbered from the most-significant leftmost bit in the
octet (bit 0) to the least-significant rightmost bit (bit 7).
Cajun numbering continues across octets, so that octet 1 bit 0 is
called bit 8 in the Cajun scheme. That number is also shown below,
with the octet value for each single bit set.
Octet 0 high-order 4 bits show LED status.
Octet 0 low-order 4 bits show ICC status.
Octets 1 - 5 show power-on self test (POST) results.
Cajun Octet Octet
bit# bit# value Meaning
- - -
0 0/0 0x80 Media gateway red LED is on.
1 0/1 0x40 The red LED is on in one or more of the media modules.
2-3 0/2-3 Unused.
4 0/4 0x08 Integrated Communications Controller hardware watchdog
alert is on.
5-7 0/5-7 Unused.
8 1/0 0x80 POST HDLC local loopback failed.
9 1/1 0x40 POST Ethernet local loopback failed.
10 1/2 0x20 POST Ethernet physical local loopback failed.
11 1/3 0x10 POST Port I/O read-write test failed.
12-15 1/4-7 Unused.
16 2/0 0x80 POST NCE0 reset failed.
17 2/1 0x40 POST NCE0 internal RAM test failed.
18 2/2 0x20 POST NCE0 FIFO loop-around failed.
19 2/3 0x10 POST NCE0 internal channel loopback failed.
20 2/4 0x08 POST NCE0 internal TDM loopback failed.
21 2/5 0x04 POST NCE0 external channel loopback failed.
22-23 2/6-7 Unused.
24 3/0 0x80 POST NCE1 reset failed.
25 3/1 0x40 POST NCE1 internal RAM test failed.
26 3/2 0x20 POST NCE1 FIFO loop-around failed.
27 3/3 0x10 POST NCE1 internal channel loopback failed.
28 3/4 0x08 POST NCE1 internal TDM loopback failed.
29 3/5 0x04 POST NCE1 external channel loopback failed.
30-31 3/6-7 Unused.
32 4/0 0x80 POST DSP reset failed.
33 4/1 0x40 POST POST SPI internal loopback failed.
34 4/2 0x20 POST Spitfire FIFO test failed.
35 4/3 0x10 POST ADC test failed.
36 4/4 0x08 POST CPLD access test failed.
37-39 4/5-7 Unused.
40-47 5/0-7 Unused.ro OCTET STRING .1.3.6.1.4.1.6889.2.9.1.1.10.13 |
cmgHardwareFanLowSpeedLevelThe fan speed level mode. Disable(2) is used for normal operation of two fan speeds.
Enable(1) is used to activate additional lower speed level.
Default is disable(2).rw Enumeration .1.3.6.1.4.1.6889.2.9.1.1.10.14 |
cmgModules OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.9.1.1.11 |
cmgModuleTableTable of physical media modules in this media gateway. SEQUENCE OF CmgModuleEntry .1.3.6.1.4.1.6889.2.9.1.1.11.1 |
cmgModuleEntryAn entry in the table, representing a single media module. CmgModuleEntry .1.3.6.1.4.1.6889.2.9.1.1.11.1.1 |
cmgModuleSlotSlot number of this module.ro INTEGER .1.3.6.1.4.1.6889.2.9.1.1.11.1.1.1 |
cmgModuleTypeType of this module.ro Enumeration .1.3.6.1.4.1.6889.2.9.1.1.11.1.1.2 |
cmgModuleDescriptionDescription of this media module, e.g. 'Avaya E1/T1 media module
with integrated CSU/DSU'ro DisplayString .1.3.6.1.4.1.6889.2.9.1.1.11.1.1.3 |
cmgModuleNameUser-assigned name of this media module.ro DisplayString .1.3.6.1.4.1.6889.2.9.1.1.11.1.1.4 |
cmgModuleSerialNumberSerial number of this module. The first 12 characters are meaningful.
Form is yyLLmmnnnnnn, where
yy = last 2 digits of the year of manufacture
LL = manufacturing facility, e.g. DR for Denver, Colorado
mm = month of manufacture, 01 - 12
nnnnnn = a six-digit sequence numberro DisplayString .1.3.6.1.4.1.6889.2.9.1.1.11.1.1.5 |
cmgModuleHWVintageHardware vintage of this module.ro DisplayString .1.3.6.1.4.1.6889.2.9.1.1.11.1.1.6 |
cmgModuleHWSuffixHardware vintage suffix of this module.ro DisplayString .1.3.6.1.4.1.6889.2.9.1.1.11.1.1.7 |
cmgModuleFWVersionFirmware version of this module. This duplicates information available
in the Load MIB. It shows the media module run image version, plus
the VoIP engine version if applicable.ro DisplayString .1.3.6.1.4.1.6889.2.9.1.1.11.1.1.8 |
cmgModuleNumberOfPortsNumber of physical connectors on this module.ro INTEGER .1.3.6.1.4.1.6889.2.9.1.1.11.1.1.9 |
cmgModuleFaultMaskEach bit of this value set to '1' indicates a specific fault
in the module.
Octets are numbered in the order in which they appear in the PDU.
Bits are numbered from the most-significant leftmost bit in the
octet (bit 0) to the least-significant rightmost bit (bit 7).
Cajun numbering continues across octets, so that octet 1 bit 0 is
called bit 8 in the Cajun scheme. That number is also shown below,
with the octet value for each single bit set.
Cajun Octet Octet
bit# bit# value Meaning
- - -
0 0/0 0x80 Media module is in administrative busy-out.
1 0/1 0x40 One or more ports on this media module is in administrative
busy-out.
2 0/2 0x20 Insertion sequence failed.
3 0/3 AWOH data module conflict.
4 0/4 0x08 Media module automatic reset occurred.
5 0/5 0x04 One or more power-on startup tests failed.
6 0/6 0x02 Media module parameter exchange failed.
7 0/7 Unsupported module enrolment.
8-15 1/0-7 Unused.ro OCTET STRING .1.3.6.1.4.1.6889.2.9.1.1.11.1.1.10 |
cmgModuleStatusMaskEach bit of this value set to '1' indicates a specific status
condition in the module.
Octets are numbered in the order in which they appear in the PDU.
Bits are numbered from the most-significant leftmost bit in the
octet (bit 0) to the least-significant rightmost bit (bit 7).
Cajun numbering continues across octets, so that octet 1 bit 0 is
called bit 8 in the Cajun scheme. That number is also shown below,
with the octet value for each single bit set.
Cajun Octet Octet
bit# bit# value Meaning
- - -
0 0/0 0x80 Red LED is on.
1 0/1 0x40 Module controlled by ACP on communications controller.
2-7 0/2-7 Unused.
8-15 1/0-7 Unused.ro OCTET STRING .1.3.6.1.4.1.6889.2.9.1.1.11.1.1.11 |
cmgModuleResetSetting the value of this attribute to ON is interpreted as a reset
command for the module. It initiates a complete reinitialization of
the module and of all the devices incorporated inside the module.rw Enumeration .1.3.6.1.4.1.6889.2.9.1.1.11.1.1.12 |
cmgModuleNumberOfChannelsNumber of communications channels or spans on this module. Earlier
Avaya products have referred to T1E1 channels as ports. This media
gateway calls them channels.ro INTEGER .1.3.6.1.4.1.6889.2.9.1.1.11.1.1.13 |
cmgDsu OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.9.1.1.11.2 |
cmgDsuConfigTableConfiguration of E1/T1 DSUs in this media gateway.obsolete SEQUENCE OF CmgDsuConfigEntry .1.3.6.1.4.1.6889.2.9.1.1.11.2.1 |
cmgDsuConfigEntryAn entry in the table, representing the configuration of one DSU
on a T1/E1 media module.obsolete CmgDsuConfigEntry .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1 |
cmgDsuSlotSlot number of this DSU.roobsolete INTEGER .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.1 |
cmgDsuPortPort number of this DSU.roobsolete INTEGER .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.2 |
cmgDsuPortEnableThis object allows a user to take the E1/T1 port out of service for
administration. During administration, it may be in an inconsistent
state. When administration is complete, the port may be enabled
again. If the port is not yet correctly administered, the change to
the enabled state will fail with an INCONSISTENT_VALUE error.rwobsolete Enumeration .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.3 |
cmgDsuDataFormatData format (channel rate) of this DSU.rwobsolete Enumeration .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.4 |
cmgDsuFlowControlSpecifies the conditions under which this DSU will send all ones to
indicate data port not ready.
dtr-rts(1) Monitor both DTR and RTS as described below. If either
is interrupted, send all ones.
dtr(2) Monitor the DTE Ready interchange circuit CD (CCITT 108/1/2).
If DTR is interrupted, send all ones.
rts(3) Monitor the Request-to-Send interchange circuit CD (CCITT 105).
If RTS is interrupted, send all ones.
disable(4) Do not monitor interchange circuits from the DTE.rwobsolete Enumeration .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.5 |
cmgDsuYellowAlarmActionSpecifies the action to take when a yellow alarm is received on
the network interface.
noAction(1) Ignore yellow alarms.
halt(2) Stop transmission and disable the data port. Send all ones
on the Received Data interchange circuit BB (CCITT 104) and
interrupt the Clear-to-Send interchange circuit (CCITT 106).rwobsolete Enumeration .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.6 |
cmgDsuReceiveClockSpecifies whether data received from the data port is clocked using
the DSU internal clock or by an external clock provided by the DTE
connected to the port. When an external clock is used, it must be
synchronized to the same clock source as the DSU.
The DSU Receive Clock is equivalent to the Data Port Transmit Clock.
internal(1) The clock is provided internally by the DSU/CSU on the
TXC interchange circuit DB (CCITT 114).
external(2) The clock is provided externally by the DTE on the XTXC
interchange circuit DA (CCITT 113).rwobsolete Enumeration .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.7 |
cmgDsuInvertTxCSpecifies whether the clock supplied by the DSU/CSU on the TXC
interchange circuit DB (CCITT 114) is phase inverted with respect
to the Transmitted Data interchange ciucuit BA (CCITT 103). This
option is useful when long cable lengths between the DSU/CSU and
the DTE are causing data errors.rwobsolete Enumeration .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.8 |
cmgDsuInvertRxCSpecifies whether the receive clock supplied by the DSU/CSU or
DTE is phase inverted.rwobsolete Enumeration .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.9 |
cmgDsuInvertTxDSpecifies whether the transmitted data stream is logically inverted
before being transmitted. This option is useful for applications
where HDLC data is being transported. Inverting the data ensures
that the density requirements for the network interface are met.rwobsolete Enumeration .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.10 |
cmgDsuInvertRxDSpecifies whether the received data stream is logically inverted.
This option is useful for applications where HDLC data is being
transported. Inverting the data ensures that the density
requirements for the network interface are met.rwobsolete Enumeration .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.11 |
cmgDsuPortInitiatedLoopbackSpecifies whether the DSU should accept loopback requests from
the DTE port. The local DTE can send an LL or RL signal to the
T1/E1 media module in the EIA-530A interface. The LL signal causes
the module to activate a local DTE loopback. An RL signal causes
the module to send an in-band code to signal the far end to go
into loopback.rwobsolete Enumeration .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.12 |
cmgDsuNetworkInitiatedLoopbackSpecifies whether the DSU should accept in-band loopback requests
from the far end, that is, a DSU across the network.rwobsolete Enumeration .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.13 |
cmgDsuChannelAssignmentsSpecifies which channels are assigned to Voice and which to the DSU.
Each bit represents one channel. If the bit is set to 1, the channel
is assigned to the DSU; otherwise it is assigned to Voice. The
channel number of a bit is determined by the formula (8*n + b + 1),
where n is the octet number and b is the bit number. So the 3rd bit
in octet 2 represents channel (8*2 + 3 + 1) = 20.rwobsolete OCTET STRING .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.14 |
cmgDsuDataRateData format (channel rate) of this DSU times the number of channels
of type ds0-dsu-channel(5). See cmgChType in cmgChannelTable.roobsolete INTEGER .1.3.6.1.4.1.6889.2.9.1.1.11.2.1.1.15 |
cmgDsuPortStatusTableStatus of E1/T1 DSUs in this media gateway.obsolete SEQUENCE OF CmgDsuPortStatusEntry .1.3.6.1.4.1.6889.2.9.1.1.11.2.2 |
cmgDsuPortStatusEntryAn entry in the table, representing the configuration of one DSU
on a T1/E1 media module.obsolete CmgDsuPortStatusEntry .1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1 |
cmgDsuRTSState of request-to-send signal from the DTE to the DSU.roobsolete Enumeration .1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.1 |
cmgDsuDTRState of data-terminal-ready signal from the DTE to the DSU.roobsolete Enumeration .1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.2 |
cmgDsuLLIs there a DTE local loopback active between the DTE and the DSU?roobsolete Enumeration .1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.3 |
cmgDsuRLIs there a remote loopback active in the FPGA?roobsolete Enumeration .1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.4 |
cmgDsuRLSDState of the Receive Line Signal Detect from the DSU to the DTE.roobsolete Enumeration .1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.5 |
cmgDsuCTSState of clear-to-send signal from the DSU to the DTE.roobsolete Enumeration .1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.6 |
cmgDsuDSRState of data-set-ready signal from the DCE to the DTE.roobsolete Enumeration .1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.7 |
cmgDsuRingState of the DCE ring indicator signal to the DTE.roobsolete Enumeration .1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.8 |
cmgDsuTestModeIndicates whether tests are currently in progress.roobsolete Enumeration .1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.9 |
cmgDsuTxDState of data transmission from the synchronous DTE to the
data port on the DSU.roobsolete Enumeration .1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.10 |
cmgDsuRxDState of data reception at the synchronous DTE from the
data port on the DSU/CSU.roobsolete Enumeration .1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.11 |
cmgDsuFaultMaskEach bit of this value set to '1' indicates a specific fault
in this DSU.
Octets are numbered in the order in which they appear in the PDU.
Bits are numbered from the most-significant leftmost bit in the
octet (bit 0) to the least-significant rightmost bit (bit 7).
Cajun numbering continues across octets, so that octet 1 bit 0 is
called bit 8 in the Cajun scheme. That number is also shown below,
with the octet value for each single bit set.
Cajun Octet Octet
bit# bit# value Meaning
- - -
0 0/0 0x80 DSU FPGA configuration failure.
1 0/1 0x40 DSU automatic reset.
2-3 0/2-3 Unused.
4 0/4 0x08 DSU DTE DTR off - DTE is disconnected or not functioning.
5 0/5 0x04 DSU DTE RTS off - DTE is not sending data.
6 0/6 0x02 DSU TxD failure - data received from DTE is all zeroes or
all ones.
7 0/7 0x01 DSU RxD failure - data received from far end is all zeroes or
all ones.
8-15 1/0-7 Unused.roobsolete OCTET STRING .1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.12 |
cmgDsuStatusMaskEach bit of this value set to '1' indicates a specific status
condition in this DSU, or a fault or status condition in its
associated CSU.
Octets are numbered in the order in which they appear in the PDU.
Bits are numbered from the most-significant leftmost bit in the
octet (bit 0) to the least-significant rightmost bit (bit 7).
Cajun numbering continues across octets, so that octet 1 bit 0 is
called bit 8 in the Cajun scheme. That number is also shown below,
with the octet value for each single bit set.
If the CSU is reporting a Blue Alarm (AIS), multiple other alarms
may be hidden by the Blue Alarm.
Octets 0-1 show CSU fault status.
Octet 2 shows CSU loopbacks active.
Octet 3 shows DSU loopbacks active.
Cajun Octet Octet
bit# bit# value Meaning
- - -
0-5 0/0-5 Unused.
6 0/6 0x02 CSU CRC multiframe lost (LCM) - E1 only
7 0/7 0x01 CSU remote multiframe alignment lost (RMA) - E1 only
8 1/0 0x80 CSU local multiframe alignment lost (LMA) - E1 only
9 1/1 0x40 CSU polar density violations (PDV) - in the T1 configuration
using AMI line coding, this is equivalent to bipolar
violations (BPV).
10 1/2 0x20 CSU alarm indication signal (AIS, Blue Alarm).
11 1/3 0x10 CSU remote alarm indication signal (RAI, Yellow Alarm).
12 1/4 0x08 CSU loss of frame (LOF, Red Alarm) - unable to synchronize
13 1/5 0x04 CSU excessive error rate (EER) - applies to ESF framing only.
on DS1 signal.
14 1/6 0x02 CSU out of frame (OOF) - 2 of 4 frame synchronization bits
in error.
15 1/7 0x01 CSU loss of signal (LOS) - 175 consecutive zeroes received.
16-20 2/0-4 Unused.
21 2/5 0x04 CSU Digital diagnostic loopback active (towards DTE). This is
the equivalent of either equipment (DTE) or repeater loopback
in the Paradyne 3160.
22 2/6 0x02 CSU Line loopback active (towards network).
23 2/7 0x01 CSU Payload loopback active (towards network).
24-26 3/0-2 Unused.
27 3/3 0x10 DSU Far-end Data Channel loopback active.
28 3/4 0x08 DSU Data Terminal loopback active.
29 3/5 0x04 DSU Remote loopback active.
30 3/6 0x02 DSU Near-end Data Channel loopback active.
31 3/7 0x01 DSU Local DTE loopback active.roobsolete OCTET STRING .1.3.6.1.4.1.6889.2.9.1.1.11.2.2.1.13 |
cmgDsuTestTableLoopback tests in effect on DSUs in this media gateway.obsolete SEQUENCE OF CmgDsuTestEntry .1.3.6.1.4.1.6889.2.9.1.1.11.2.3 |
cmgDsuTestEntryAn entry in the table, representing the configuration of one DSU
on a T1/E1 media module.obsolete CmgDsuTestEntry .1.3.6.1.4.1.6889.2.9.1.1.11.2.3.1 |
cmgDsuLoopbackPatternSpecifies the pattern to be sent during a loopback test.
allZeroes(1) is most often used to verify B8ZS line encoding.
allOnes(2) is most often used to measure signal power.
oneZeroOne(3) alternates ones and zeroes. It is most often used
to test bridge taps.
oneIn5(4) is the pattern '00001', to send a remote loopback request.
oneIn8(5) is the pattern '00000001', used to test repeater timing
recovery.
threeIn24(6) is 21 zeroes followed by 3 ones, used to test the ones
density tolerance in AMI coded lines.
qrs(7) is a quasi-random signal approximating live data. It is
also available in repeating patterns of 511 or 2047 bits.
none means no pattern; used for response.roobsolete Enumeration .1.3.6.1.4.1.6889.2.9.1.1.11.2.3.1.1 |
cmgDsuLocalDteLoopbackIndicates whether a Local DTE loopback is active, in which
a signal received from the DTE is looped back after passing
through the transceivers, but before passing through the FIFOs.
This loopback can be activated by this DSU or by the local DTE.roobsolete Enumeration .1.3.6.1.4.1.6889.2.9.1.1.11.2.3.1.2 |
cmgDsuNearEndDataChannelLoopbackIndicates whether a Near-end Data Channel loopback is active,
in which a signal received from the CSU is looped back after
passing through the FIFOs but before entering the transceivers.
This loopback was activated by the near end, that is, this DSU.roobsolete Enumeration .1.3.6.1.4.1.6889.2.9.1.1.11.2.3.1.3 |
cmgDsuFarEndDataChannelLoopbackIndicates whether a Far-end Data Channel loopback is active.
This is functionally equivalent to the Near-end Data Channel
loopback, except that this loopback was activated by the far
end, that is, a DSU across the network.roobsolete Enumeration .1.3.6.1.4.1.6889.2.9.1.1.11.2.3.1.4 |
cmgDsuRemoteLoopbackIndicates whether a Remote loopback is active, in which a
signal received from the CSU is looped back before entering
the FIFOs. This loopback may have been activated by either
the near end (this DSU) or the far end (a DSU across the
network).roobsolete Enumeration .1.3.6.1.4.1.6889.2.9.1.1.11.2.3.1.5 |
cmgDsuDataTerminalLoopbackIndicates whether a Data Terminal loopback is active, in which
a signal received from the DTE is looped back after passing
through the FIFOs. This loopback can only be activated by the
near end, that is, this DSU.roobsolete Enumeration .1.3.6.1.4.1.6889.2.9.1.1.11.2.3.1.6 |
cmgDsuResetSet to on(1) to request reinitialization of the DSU.rwobsolete Enumeration .1.3.6.1.4.1.6889.2.9.1.1.11.2.3.1.7 |
cmgAnalogPorts OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.9.1.1.12 |
cmgAnalogPortTableTable of analog ports in this media gateway. SEQUENCE OF CmgAnalogPortEntry .1.3.6.1.4.1.6889.2.9.1.1.12.1 |
cmgAnalogPortEntryAn entry in the table, representing a single analog port. CmgAnalogPortEntry .1.3.6.1.4.1.6889.2.9.1.1.12.1.1 |
cmgAnalogSlotSlot number of this analog port.ro INTEGER .1.3.6.1.4.1.6889.2.9.1.1.12.1.1.1 |
cmgAnalogPortPort number of this analog port.ro INTEGER .1.3.6.1.4.1.6889.2.9.1.1.12.1.1.2 |
cmgAnalogEchoCancellerControlThe echo canceller control setting for this analog port.
auto means that the system will enable or disable the echo
canceller as appropriate for each call.
fixedOn indicates that the analog firmware always enables
the echo canceller (this value cannot be changed).
Similarly, notSupported indicates that the analog HW
does not contain echo cancellers (this value cannot be changed).rw Enumeration .1.3.6.1.4.1.6889.2.9.1.1.12.1.1.3 |
cmgAnalogEchoCancellerConfig1Echo canceller configuration setting for this analog port (byte 1 of 2).
This value is not writeable if cmgAnalogEchoCancellerControl
is fixedOn(3) or notSupported(4).rw INTEGER .1.3.6.1.4.1.6889.2.9.1.1.12.1.1.4 |
cmgAnalogEchoCancellerConfig2Echo canceller configuration setting for this analog port (byte 2 of 2).
This value is not writeable if cmgAnalogEchoCancellerControl
is fixedOn(3) or notSupported(4).rw INTEGER .1.3.6.1.4.1.6889.2.9.1.1.12.1.1.5 |
cmgAnalogBalanceBalance index.rw INTEGER .1.3.6.1.4.1.6889.2.9.1.1.12.1.1.6 |
cmgAnalogReceiveGainThe receive gain multiplied by 100, for instance -123 indicates -1.23dB.rw INTEGER (-600..300) .1.3.6.1.4.1.6889.2.9.1.1.12.1.1.7 |
cmgAnalogTransmitGainThe transmit gain multiplied by 100, for instance +287 indicates 2.87dB.rw INTEGER (-600..300) .1.3.6.1.4.1.6889.2.9.1.1.12.1.1.8 |
cmgExpansionUnits OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.9.1.1.13 |
cmgExpansionUnitsTableTable of Expansion Units connected to this media gateway. SEQUENCE OF CmgExpansions .1.3.6.1.4.1.6889.2.9.1.1.13.1 |
cmgExpansionsAn entry in the table, representing a single Expansion Unit. CmgExpansions .1.3.6.1.4.1.6889.2.9.1.1.13.1.1 |
cmgExpansionSlotExpansion Unit Slot.ro INTEGER .1.3.6.1.4.1.6889.2.9.1.1.13.1.1.1 |
cmgExpansionModelNumberExpansion Unit model.ro DisplayString .1.3.6.1.4.1.6889.2.9.1.1.13.1.1.2 |
cmgExpansionDescriptionExpansion Unit description.ro DisplayString .1.3.6.1.4.1.6889.2.9.1.1.13.1.1.3 |
cmgExpansionSerialNumberExpansion Unit serial number.ro DisplayString .1.3.6.1.4.1.6889.2.9.1.1.13.1.1.4 |
cmgExpansionHWVintageExpansion Unit HW vintage.ro DisplayString .1.3.6.1.4.1.6889.2.9.1.1.13.1.1.5 |
cmgExpansionHWSuffixExpansion Unit HW suffix.ro DisplayString .1.3.6.1.4.1.6889.2.9.1.1.13.1.1.6 |
cmgExpansionDemandTestWhen set to on(1), activates on demand test for the Expansion Unit.rw Enumeration .1.3.6.1.4.1.6889.2.9.1.1.13.1.1.7 |
cmgExpansionDemandTestResultResult of the on demand test for the Expansion Unit.
Failure(1) may be the result of a disconnected or bad cable.ro Enumeration .1.3.6.1.4.1.6889.2.9.1.1.13.1.1.8 |
cmgTimeslotMonitoringTimeslot Monitoring flag. When on, timeslot usage is monitored and
traps are sent when thresholds are crossed. Those traps are
cmgTimeslotOccupancyFault, cmgTimeslotOccupancyClear,
cmgTimeslotAvailabilityFault and cmgTimeslotAvailabilityClear.rw Enumeration .1.3.6.1.4.1.6889.2.9.1.1.14 |
cmgTimeslotUpperThresholdTimeslot Upper threshold. The gateway will send trap cmgTimeslotOccupancyFault
as soon as the timeslot usage goes above this threshold.
This threshold must be set greater than the lower threshold; for example,
cmgTimeslotLowerThreshold=85, cmgTimeslotUpperThreshold=90. Default is 90.
cmgTimeslotMonitoring must be set to on(1) for traps to be sent.rw INTEGER .1.3.6.1.4.1.6889.2.9.1.1.15 |
cmgTimeslotLowerThresholdTimeslot Lower threshold. After the gateway has sent a cmgTimeslotOccupancyFault
trap, it will send a cmgTimeslotOccupancyClear as soon as the timeslot usage goes
below this threshold. Also after the gateway has sent a cmgTimeslotAvailabilityFault
trap, it will send cmgTimeslotAvailabilityClear as soon as the timeslot usage goes
below this threshold.
This lower threshold must be less than the upper threshold; for example
cmgTimeslotLowerThreshold=85, cmgTimeslotUpperThreshold=90. Default is 85.
cmgTimeslotMonitoring must be set to on(1) for traps to be sent.rw INTEGER .1.3.6.1.4.1.6889.2.9.1.1.16 |
cmgProcessor OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.9.1.2 |
cmgProcessorConfig OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.9.1.2.1 |
cmgGatewayNumberMedia gateway number by which the Call Controller
knows this media module.ro DisplayString .1.3.6.1.4.1.6889.2.9.1.2.1.1 |
cmgMACAddressMAC address of this processor.ro OCTET STRING .1.3.6.1.4.1.6889.2.9.1.2.1.2 |
cmgFWVersionFirmware version of this gateway.ro OCTET STRING .1.3.6.1.4.1.6889.2.9.1.2.1.3 |
cmgCurrentIpAddressCurrent IP address of this processor. If cmgUseDhcpForIpAddress
was on(1) at the time of last startup, this was received from the
DHCP server. Otherwise it is the value of cmgStaticIpAddress
at the last startup. If cmgUseDhcpForIpAddress was on(1) and
the DHCP request failed, this value will be '0.0.0.0'.ro IpAddress .1.3.6.1.4.1.6889.2.9.1.2.1.4 |
cmgUseDhcpForIpAddressSpecifies whether the gateway should get its IP address, default
gateway, and subnet mask from the DHCP server, or use the locally
administered static IP address, default gateway, and subnet mask.rw Enumeration .1.3.6.1.4.1.6889.2.9.1.2.1.7 |
cmgUseDhcpForVlanSpecifies whether the gateway should get its VLAN ID from the
DHCP server, or use the locally administered static VLAN ID
cmgStatic802Vlan.rw Enumeration .1.3.6.1.4.1.6889.2.9.1.2.1.8 |
cmgDhcpSsonSpecifies the DHCP Site-Specific Option Number to use with a
DHCP request. This gives the DHCP server information about the
client's capabilities and properties.rw INTEGER .1.3.6.1.4.1.6889.2.9.1.2.1.9 |
cmgStaticIpAddressLocally administered static IP address of this processor. If
cmgUseDhcpForIpAddress is on(1), this object is ignored.rw IpAddress .1.3.6.1.4.1.6889.2.9.1.2.1.10 |
cmgDnsServerListComma-separated list of DNS server IP addresses this processor
may use.rw DisplayString .1.3.6.1.4.1.6889.2.9.1.2.1.13 |
cmgDnsHostnameDNS Hostname of this processor.ro DisplayString .1.3.6.1.4.1.6889.2.9.1.2.1.14 |
cmgMgpFaultMaskEach bit of this value set to '1' indicates a specific fault
in the Media Gateway processor.
Octets are numbered in the order in which they appear in the PDU.
Bits are numbered from the most-significant leftmost bit in the
octet (bit 0) to the least-significant rightmost bit (bit 7).
Cajun numbering continues across octets, so that octet 1 bit 0 is
called bit 8 in the Cajun scheme. That number is also shown below,
with the octet value for each single bit set.
Cajun Octet Octet
bit# bit# value Meaning
- - -
0 0/0 0x80 Memory failure.
1 0/1 0x40 DHCP request failure.
2 0/2 0x20 Firmware download failure.
3 0/3 0x10 Software watchdog alert - MG processes restarting.
4 0/4 0x08 Internal Communications Controller expected but not present.
5 0/5 0x04 Internal Communications Controller automatic reset.
6 0/6 0x02 Media Gateway busy-out.
7 0/7 0x01 Configuration upload failure.
8 1/0 0x80 Primary controller not found.
9 1/1 0x40 No controller found.
10 1/2 0x20 Registration failure.
11 1/3 0x10 H.248 control link down.
12-13 1/4-5 Unused.
14 1/6 0x02 Maintenance test failure.
15 1/7 0x01 Maintenance test failure over threshold.
16 2/0 0x80 Configuration download failure.
17-23 2/0-7 Unused.ro OCTET STRING .1.3.6.1.4.1.6889.2.9.1.2.1.15 |
cmgProcessorQos OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.9.1.2.2 |
cmgQosControlSpecifies whether this processor should use the locally administered
Quality of Service parameters, or whether it should use the parameters
downloaded from the controller. This affects both signaling and
voice traffic.ro Enumeration .1.3.6.1.4.1.6889.2.9.1.2.2.1 |
cmgRemoteSigDscpDiffServ Code Point for signaling traffic on the H.248 link,
received from the controller. If cmgQosControl is local(1),
this value is ignored.ro INTEGER .1.3.6.1.4.1.6889.2.9.1.2.2.2 |
cmgRemoteSig802Priority802.1 Priority for signaling traffic on the H.248 link,
received from the controller. If cmgQosControl is local(1),
this value is ignored.ro INTEGER .1.3.6.1.4.1.6889.2.9.1.2.2.3 |
cmgLocalSigDscpDiffServ Code Point for signaling traffic on the H.248 link,
locally administered. If cmgQosControl is remote(2),
this value is ignored.rw INTEGER .1.3.6.1.4.1.6889.2.9.1.2.2.4 |
cmgLocalSig802Priority802.1 Priority for signaling traffic on the H.248 link,
locally administered. If cmgQosControl is remote(2),
this value is ignored.rw INTEGER .1.3.6.1.4.1.6889.2.9.1.2.2.5 |
cmgStatic802Vlan802.1 VLAN ID for this processor, locally administered.
If cmgUseDhcpForVlan is on(1), this value is ignored.rw INTEGER .1.3.6.1.4.1.6889.2.9.1.2.2.6 |
cmgCurrent802Vlan802.1 VLAN ID currently in use for this processor. If
cmgUseDhcpForVlan was on(1) at the last startup, this came
from the DHCP server. Otherwise it is equal to cmgStatic802Vlan
at the time of the last startup.ro INTEGER .1.3.6.1.4.1.6889.2.9.1.2.2.7 |
cmgProcessorClock OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.9.1.2.3 |
cmgPrimaryClockSourcePrimary clock source configured for this processor. If a T1
or BRI module is providing the clock, it reads 'Vs' or 'Vs(pp,pp,...)',
where s is slot number and pp are the port numbers. If the
VoIP module is providing the clock, it reads 'voip'.
It reads 'None' if no primary clock source is configured.
If cmgClockSourceControl is remote(2), access is read-only.
If cmgClockSourceControl is local(1), access is read-write.rw DisplayString .1.3.6.1.4.1.6889.2.9.1.2.3.1 |
cmgSecondaryClockSourceSecondary clock source configured for this processor. If a T1
or BRI module is providing the clock, it reads 'Vs' or 'Vs(pp,pp,...)',
where s is slot number and pp are the port numbers. If the
VoIP module is providing the clock, it reads 'voip'.
It reads 'None' if no secondary clock source is configured.
If cmgClockSourceControl is remote(2), access is read-only.
If cmgClockSourceControl is local(1), access is read-write.rw DisplayString .1.3.6.1.4.1.6889.2.9.1.2.3.2 |
cmgActiveClockSourceIdentifies the clock source in use at this processor.
If cmgClockSourceControl is remote(2), access is read-only.
If cmgClockSourceControl is local(1), access is read-write.rw Enumeration .1.3.6.1.4.1.6889.2.9.1.2.3.3 |
cmgClockSwitchingA flag to enable/disable sync switching.
If cmgClockSourceControl is remote(2), access is read-only.
If cmgClockSourceControl is local(1), access is read-write.rw Enumeration .1.3.6.1.4.1.6889.2.9.1.2.3.4 |
cmgClockSourceControlSpecifies whether this processor sync administration parameters
are controlled locally or remotely.ro Enumeration .1.3.6.1.4.1.6889.2.9.1.2.3.5 |
cmgControllers OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.9.1.3 |
cmgRegistrationStateShows whether this media gateway is currently registered with any
call controller.ro Enumeration .1.3.6.1.4.1.6889.2.9.1.3.1 |
cmgActiveControllerAddressIP Address of the call controller now serving this media gateway.
If cmgRegistrationState is notRegistered(2), this will be '0.0.0.0'.
Otherwise it will be taken from one of the two address lists at
registration time.ro IpAddress .1.3.6.1.4.1.6889.2.9.1.3.2 |
cmgH248LinkStatusStatus of the H.248 link connecting this media gateway
to its active call controller.ro Enumeration .1.3.6.1.4.1.6889.2.9.1.3.3 |
cmgH248LinkErrorCodeMost recently received H.248 error code affecting the link
between this media gateway and its active call controller.
If cmgH248LinkStatus is up(1), this value will be zero.
0 No error
400 Syntax error in message
403 Syntax error in TransactionRequest
406 Version not supported
410 Incorrect identifier
411 The transaction refers to an unknown ContextId
412 No ContextIDs available
421 Unknown action or illegal combination of actions
422 Syntax error in action
430 Unknown TerminationID
431 No TerminationID matched a wildcard
432 Out of TerminationIDs or No TerminationID available
433 TerminationID is already in a Context
434 Max number of Terminations in a Context exceeded
440 Unsupported or unknown package
441 Missing remote or local descriptor
442 Syntax error in command
443 Unknown command
444 Unsupported or unknown descriptor
445 Unsupported property
446 Unsupported or unknown parameter
447 Descriptor not legal in this command
448 Descriptor appears twice in a command
450 No such property in this package
451 No such event in this package
452 No such signal in this package
453 No such statistic in this package
454 No such parameter value in this package
455 Parameter illegal in this descriptor
456 Parameter or property appears twice in this descriptor
457 Missing parameter in signal or event
471 Implied add for multiplex failure
500 Internal software failure in the media gateway
501 Not implemented
502 Not ready
503 Service unavailable
504 Command received from unauthorized entity
505 Transaction Request received before ServiceChange Reply received
510 Insufficient resources
512 Gateway unequipped to detect requested event
513 Gateway unequipped to generate requested signal
514 Gateway cannot send the specified announcement
515 Unsupported media type
517 Unsupported or invalid mode
518 Event buffer full
519 Out of space to store digit map
520 Digit map undefined in MG
521 Termination is 'Service Changing'
526 Insufficient bandwidth
529 Internal hardware failure in MG
530 Temporary network failure
531 Permanent network failure
581 Does not existro Integer32 .1.3.6.1.4.1.6889.2.9.1.3.4 |
cmgUseDhcpForMgcListShould this gateway get its controller IP address from the DHCP
server, or should it use the locally administered controller list?
If this value is on(1), the gateway will try the DHCP-provided
addresses first, and if they fail it will try the static addresses.
If the value is off(2), the gateway will try only static addresses.
Changes to this object take effect when the gateway is restarted.rw Enumeration .1.3.6.1.4.1.6889.2.9.1.3.5 |
cmgStaticControllerHostsComma-separated list of up to four administered static IP addresses
for primary and backup call controllers. IP addresses should be in
the form '123.124.125.126', with no port numbers. (The Media Gateway
always uses the default H.248 port number 2945.) An IP address may
appear more than once in the list. If cmgUseDhcpForMgcList is equal
to off(2), these are the only addresses the gateway will try. In that
case this list must contain at least one active entry. Changes to the
list take effect when the gateway is restarted.rw DisplayString .1.3.6.1.4.1.6889.2.9.1.3.6 |
cmgDhcpControllerHostsList of IP addresses for up to four primary and backup call
controllers, received from the DHCP server. An IP address may
appear more than once in the list. If cmgUseDhcpForMgcList is
equal to on(2), the gateway will try these addresses first,
and if none succeed, it will try the addresses in
cmgStaticControllerHosts.ro DisplayString .1.3.6.1.4.1.6889.2.9.1.3.7 |
cmgPrimarySearchTimeNumber of minutes for the Primary Search Timer.rw INTEGER .1.3.6.1.4.1.6889.2.9.1.3.8 |
cmgTotalSearchTimeNumber of minutes for the Total Search Timer.rw INTEGER .1.3.6.1.4.1.6889.2.9.1.3.9 |
cmgTransitionPointValue of the Transition Point.rw INTEGER .1.3.6.1.4.1.6889.2.9.1.3.10 |
cmgVoip OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.9.1.4 |
cmgVoipEngineUseDhcpDetermines whether VoIP engines use their statically administered
IP addresses or whether they get their addresses from the DHCP server.rw Enumeration .1.3.6.1.4.1.6889.2.9.1.4.1 |
cmgVoipQosControlThis is the same as cmgQosControl in the MG Processor group. That
parameter determines whether the gateway uses voice and signaling
QoS parameters administered locally or whether it gets the parameters
from its call controller. It is reproduced here for convenience.ro Enumeration .1.3.6.1.4.1.6889.2.9.1.4.2 |
cmgVoipRemoteParameters OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.9.1.4.3 |
cmgVoipRemoteQosParameters OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.9.1.4.3.1 |
cmgVoipRemoteBbeDscpThe Better-than-Best-Effort DiffServ code point received from the
controller. This is a value to be assigned to the code point part
of the Differentiated Services field in the IP header of each voice
packet. See RFC2475 for a full description of Differentiated Services.ro INTEGER .1.3.6.1.4.1.6889.2.9.1.4.3.1.1 |
cmgVoipRemoteEfDscpThe Expedited-Forwarding DiffServ code point received from the
controller. This is a value to be assigned to the code point part
of the Differentiated Services field in the IP header of each voice
packet. See RFC2475 for a full description of Differentiated Services.ro INTEGER .1.3.6.1.4.1.6889.2.9.1.4.3.1.2 |
cmgVoipRemote802PriorityThe 802.1 priority received from the call controller. This is
a priority value to be assigned to the tag header for priority-tagged
voice frames. See IEEE standard 802.1Q-1998 for a full description.ro INTEGER .1.3.6.1.4.1.6889.2.9.1.4.3.1.3 |
cmgVoipRemoteMinRtpPortThe lower end of the range of UDP ports assigned to voice traffic,
received from the call controller. Must be less than or equal
to cmgVoipRemoteMaxRtpPort.ro INTEGER .1.3.6.1.4.1.6889.2.9.1.4.3.1.4 |
cmgVoipRemoteMaxRtpPortThe upper end of the range of UDP ports assigned to voice traffic,
received from the call controller. Must be greater than or equal
to cmgVoipRemoteMinRtpPort.ro INTEGER .1.3.6.1.4.1.6889.2.9.1.4.3.1.5 |
cmgVoipRemoteRtcpParameters OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.9.1.4.3.2 |
cmgVoipRemoteRtcpEnabledA flag that determines whether the Media Gateway will collect and
report RTCP statistics. See RFC 1889 for a full description of RTCP.
If this value is disabled(2), the rest of this group will be ignored.ro Enumeration .1.3.6.1.4.1.6889.2.9.1.4.3.2.1 |
cmgVoipRemoteRtcpMonitorIpAddressThe address of an RTCP monitor to which the Media Gateway should
report its RTCP statistics.ro IpAddress .1.3.6.1.4.1.6889.2.9.1.4.3.2.2 |
cmgVoipRemoteRtcpMonitorPortThe port on the RTCP monitor to which the Media Gateway should
report its RTCP statistics.ro INTEGER .1.3.6.1.4.1.6889.2.9.1.4.3.2.3 |
cmgVoipRemoteRtcpReportPeriodThe RTCP reporting interval in seconds.ro INTEGER .1.3.6.1.4.1.6889.2.9.1.4.3.2.4 |
cmgVoipRemoteRsvpParameters OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.9.1.4.3.3 |
cmgVoipRemoteRsvpEnabledA flag that determines whether the VoIP engines should use RSVP to
control call admission. See RFC 2205 for a full description of RSVP.
If this value is disabled(2), the rest of this group will be ignored.ro Enumeration .1.3.6.1.4.1.6889.2.9.1.4.3.3.1 |
cmgVoipRemoteRetryOnFailureA flag that determines whether the VoIP engines should retry a
reservation request after the first one fails. If this value is
disabled(2), the next object will be ignored.ro Enumeration .1.3.6.1.4.1.6889.2.9.1.4.3.3.2 |
cmgVoipRemoteRetryDelayThe interval in seconds between a reservation request failure and the
subsequent retry. If cmgVoipRemoteRetryOnFailure is disabled(2), this
object will be ignored.ro INTEGER .1.3.6.1.4.1.6889.2.9.1.4.3.3.3 |
cmgVoipRemoteRsvpProfileThe RSVP service model to request.ro Enumeration .1.3.6.1.4.1.6889.2.9.1.4.3.3.4 |
cmgVoipLocalParameters OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.9.1.4.4 |
cmgVoipLocalQosParameters OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.9.1.4.4.1 |
cmgVoipLocalBbeDscpThe Better-than-Best-Effort DiffServ code point received from the
controller. This is a value to be assigned to the code point part
of the Differentiated Services field in the IP header of each voice
packet. See RFC2475 for a full description of Differentiated Services.rw INTEGER .1.3.6.1.4.1.6889.2.9.1.4.4.1.1 |
cmgVoipLocalEfDscpThe Expedited-Forwarding DiffServ code point received from the
controller. This is a value to be assigned to the code point part
of the Differentiated Services field in the IP header of each voice
packet. See RFC2475 for a full description of Differentiated Services.rw INTEGER .1.3.6.1.4.1.6889.2.9.1.4.4.1.2 |
cmgVoipLocal802PriorityThe 802.1 priority received from the call controller. This is
a priority value to be assigned to the tag header for priority-tagged
voice frames. See IEEE standard 802.1Q-1998 for a full description.rw INTEGER .1.3.6.1.4.1.6889.2.9.1.4.4.1.3 |
cmgVoipLocalMinRtpPortThe lower end of the range of UDP ports assigned to voice traffic,
received from the call controller. Must be less than or equal
to cmgVoipLocalMaxRtpPort.rw INTEGER .1.3.6.1.4.1.6889.2.9.1.4.4.1.4 |
cmgVoipLocalMaxRtpPortThe upper end of the range of UDP ports assigned to voice traffic,
received from the call controller. Must be greater than or equal
to cmgVoipLocalMinRtpPort.rw INTEGER .1.3.6.1.4.1.6889.2.9.1.4.4.1.5 |
cmgVoipLocalRtcpParameters OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.9.1.4.4.2 |
cmgVoipLocalRtcpEnabledA flag that determines whether the Media Gateway will collect and
report RTCP statistics. See RFC 1889 for a full description of RTCP.
If this value is disabled(2), the rest of this group will be ignored.rw Enumeration .1.3.6.1.4.1.6889.2.9.1.4.4.2.1 |
cmgVoipLocalRtcpMonitorIpAddressThe address of an RTCP monitor to which the Media Gateway should
report its RTCP statistics.rw IpAddress .1.3.6.1.4.1.6889.2.9.1.4.4.2.2 |
cmgVoipLocalRtcpMonitorPortThe port on the RTCP monitor to which the Media Gateway should
report its RTCP statistics.rw INTEGER .1.3.6.1.4.1.6889.2.9.1.4.4.2.3 |
cmgVoipLocalRtcpReportPeriodThe RTCP reporting interval in seconds.rw INTEGER .1.3.6.1.4.1.6889.2.9.1.4.4.2.4 |
cmgVoipLocalRsvpParameters OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.9.1.4.4.3 |
cmgVoipLocalRsvpEnabledA flag that determines whether the VoIP engines should use RSVP to
control call admission. See RFC 2205 for a full description of RSVP.
If this value is disabled(2), the rest of this group will be ignored.rw Enumeration .1.3.6.1.4.1.6889.2.9.1.4.4.3.1 |
cmgVoipLocalRetryOnFailureA flag that determines whether the VoIP engines should retry a
reservation request after the first one fails. If this value is
disabled(2), the next object will be ignored.rw Enumeration .1.3.6.1.4.1.6889.2.9.1.4.4.3.2 |
cmgVoipLocalRetryDelayThe interval in seconds between a reservation request failure and the
subsequent retry. If cmgVoipLocalRetryOnFailure is disabled(2), this
object will be ignored.rw INTEGER .1.3.6.1.4.1.6889.2.9.1.4.4.3.3 |
cmgVoipLocalRsvpProfileThe RSVP service model to request.rw Enumeration .1.3.6.1.4.1.6889.2.9.1.4.4.3.4 |
cmgVoipEngineTableTable of VoIP engines in the media gateway. SEQUENCE OF VoipEngineEntry .1.3.6.1.4.1.6889.2.9.1.4.5 |
cmgVoipEngineEntryAn entry in the table representing one VoIP engine. VoipEngineEntry .1.3.6.1.4.1.6889.2.9.1.4.5.1 |
cmgVoipSlotLocation of this VoIP engine, either a media module slot (1-4 for G700) or
the motherboard (100 for G700, 10 for G350, G250).
For G450/G430 the index arrangement is as follows:
* For V1 - V10 the rule is cmgVoIPSlot = Slot# * 10 + SoDIMM#. Note that MM760 is not supported
in G430/G450, nor other MM which support VoIP engine. Thus, only V10 is relevant.
* For G450 motherboard is 101-104.
* For G430 motherboard is 101-102 (101 is the on board DSP and 102 is the replaceable VoIP
SoDIMM module.ro INTEGER .1.3.6.1.4.1.6889.2.9.1.4.5.1.1 |
cmgVoipMACAddressMAC address of the component hosting this VoIP engine.ro OCTET STRING .1.3.6.1.4.1.6889.2.9.1.4.5.1.2 |
cmgVoipStaticIpAddressAdministered static IP Address of this VoIP engine. If
cmgVoipEngineUseDhcp was off(2) at startup time, this value
determined the current IP address of the engine.rw IpAddress .1.3.6.1.4.1.6889.2.9.1.4.5.1.3 |
cmgVoipCurrentIpAddressIP Address currently in use at this VoIP engine. If
cmgVoipEngineUseDhcp was on(2) at startup time, this value
was received from the DHCP server. Otherwise it is equal to
cmgVoipStaticIpAddress at startup time.ro IpAddress .1.3.6.1.4.1.6889.2.9.1.4.5.1.4 |
cmgVoipJitterBufferSizeSize in bytes of the dynamic jitter buffer at this VoIP engine.ro Integer32 .1.3.6.1.4.1.6889.2.9.1.4.5.1.5 |
cmgVoipTotalChannelsTotal channels available to this VoIP engine.ro Integer32 .1.3.6.1.4.1.6889.2.9.1.4.5.1.6 |
cmgVoipChannelsInUseNumber of channels in use at this VoIP engine.ro Integer32 .1.3.6.1.4.1.6889.2.9.1.4.5.1.7 |
cmgVoipAverageOccupancy5-minute average occupancy of this VoIP engine.ro INTEGER .1.3.6.1.4.1.6889.2.9.1.4.5.1.8 |
cmgVoipHyperactivityIndicates whether hyperactivity has been detected by this VoIP engine.ro Enumeration .1.3.6.1.4.1.6889.2.9.1.4.5.1.9 |
cmgVoipAdminStateMaintenance busy-out state of this VoIP engine.ro Enumeration .1.3.6.1.4.1.6889.2.9.1.4.5.1.10 |
cmgVoipDspFWVersionFirmware version of the DSP complex on this VoIP engine. This is
also available in the Load MIB.ro DisplayString .1.3.6.1.4.1.6889.2.9.1.4.5.1.11 |
cmgVoipDspStatusStatus of the DSP complex on this VoIP engine.ro Enumeration .1.3.6.1.4.1.6889.2.9.1.4.5.1.12 |
cmgVoipEngineResetSetting the value of this attribute to ON is interpreted as
a reset command for the VoIP engine. It initiates a complete
reinitialisation of the VoIP engine.rw Enumeration .1.3.6.1.4.1.6889.2.9.1.4.5.1.13 |
cmgVoipFaultMaskEach bit of this value set to '1' indicates a specific fault
in the VoIP engine.
Octets are numbered in the order in which they appear in the PDU.
Bits are numbered from the most-significant leftmost bit in the
octet (bit 0) to the least-significant rightmost bit (bit 7).
Cajun numbering continues across octets, so that octet 1 bit 0 is
called bit 8 in the Cajun scheme. That number is also shown below,
with the octet value for each single bit set.
Cajun Octet Octet
bit# bit# value Meaning
- - -
0 0/0 0x80 Occupancy above threshold, based on a snapshot of
cmgVoipChannelsInUse divided by cmgVoipTotalChannels.
1 0/1 0x40 Occupancy above threshold, based on cmgVoipAverageOccupancy.
2 0/2 0x20 VoIP engine automatic reset.
3 0/3 0x10 VoIP hardware fault.
4 0/4 0x08 VoIP IP configuration fault.
5 0/5 0x04 VoIP DSP Failure
6 0/6 0x02 VoIP DSP CORE Failure
7 0/7 0x01 VoIP DSP FPGA Failure
8 1/0 0x80 Unsupported DSP module.
9ro OCTET STRING .1.3.6.1.4.1.6889.2.9.1.4.5.1.14 |
cmgVoipDSPCoreTableTable representing the DSP cores in VoIP engine of the media gateway. SEQUENCE OF CmgVoipDSPCoreEntry .1.3.6.1.4.1.6889.2.9.1.4.6 |
cmgVoipDSPCoreEntryAn entry in the table representing one DSP Core of a VoIP engine.
This table uses an external index from cmgVoIPEngineTable
which selects a DSP SoDIMM/engine module and secondary index
cmgDSPVoIPCoreID that selects a core on SoDIMM module CmgVoipDSPCoreEntry .1.3.6.1.4.1.6889.2.9.1.4.6.1 |
cmgDSPCoreCoreIdThe DSP core ID within the specific DSP VoIP engine.ro INTEGER .1.3.6.1.4.1.6889.2.9.1.4.6.1.1 |
cmgDSPCoreTotalChannelsTotal channels available to this DSP core.ro INTEGER .1.3.6.1.4.1.6889.2.9.1.4.6.1.2 |
cmgDSPCoreChannelsInUseNumber of channels in use at this DSP core.ro INTEGER .1.3.6.1.4.1.6889.2.9.1.4.6.1.3 |
cmgDSPCoreAdminStateMaintenance busy-out state of this DSP core.rw Enumeration .1.3.6.1.4.1.6889.2.9.1.4.6.1.4 |
cmgDSPCoreStatusStatus of the DSP Core.ro Enumeration .1.3.6.1.4.1.6889.2.9.1.4.6.1.5 |
cmgDSPCoreDemandTestActivates on demand test for the DSP Core.rw Enumeration .1.3.6.1.4.1.6889.2.9.1.4.6.1.6 |
cmgDSPCoreDemandTestResultResult of the on demand test for the DSP Core.ro Enumeration .1.3.6.1.4.1.6889.2.9.1.4.6.1.7 |
cmgVoipEchoCancellerControlThe echo canceller control setting for all VoIP engines.
auto means that the system will enable or disable the echo
cancellers as appropriate for each call.
fixedOn indicates that the VoIP firmware always enables
the echo cancellers (this value cannot be changed).rw Enumeration .1.3.6.1.4.1.6889.2.9.1.4.7 |
cmgVoipEchoCancellerConfig1Echo canceller configuration setting for all VoIP engines (byte 1 of 2).
This value may not be writable if the VoIP firmware is old.rw INTEGER .1.3.6.1.4.1.6889.2.9.1.4.8 |
cmgVoipEchoCancellerConfig2Echo canceller configuration setting for all VoIP engines (byte 2 of 2).
This value may not be writable if the VoIP firmware is old.rw INTEGER .1.3.6.1.4.1.6889.2.9.1.4.9 |
cmgTraps OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.9.1.5 |
cmgTrapManagerTableTable of trap receivers in this media gateway. SEQUENCE OF CmgTrapManagerEntry .1.3.6.1.4.1.6889.2.9.1.5.1 |
cmgTrapManagerEntryAn entry in the table, representing a single trap receiver. CmgTrapManagerEntry .1.3.6.1.4.1.6889.2.9.1.5.1.1 |
cmgTrapManagerAddressIP address of this trap receiver.rw IpAddress .1.3.6.1.4.1.6889.2.9.1.5.1.1.1 |
cmgTrapManagerControlSpecifies whether this trap receiver is currently receiving traps.rw Enumeration .1.3.6.1.4.1.6889.2.9.1.5.1.1.3 |
cmgTrapManagerMaskA bit mask indicating the trap categories of interest
to this trap receiver.
Bit Category
0 Power warnings
1 Fan and temperature warnings
2 Application faults
3 Module insert or remove
4 Configuration traps: port enable or disable, administrative
busy-out and release for ports and media modules
5-7 Not supported
8 Voice faults: Quality of service problems, voice hardware
faults
9 Normal operations: successful registration with the gateway
controller, successful firmware download.
10-31 Not supportedrw Integer32 .1.3.6.1.4.1.6889.2.9.1.5.1.1.4 |
cmgTrapManagerRowStatusThe status of this entry in the table. Available states:
active(1),
createAndGo(4),
destroy(6)
The cmgTrapManagerAddress of a new entry must be different from all other
entries, or the create request will return INCONSISTENT-VALUE-ERROR.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6889.2.9.1.5.1.1.5 |
cmgTrapDefinitions OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.9.1.5.2 |
cmgTrapVariables OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.9.1.5.2.1 |
cmgTrapLocationLocation of the problem in the form gggVspp, where
ggg Media gateway number, or zero if the gateway is not
currently registered with any controller.
V The letter V; a field separator.
s Slot number, if applicable. If the fault occurred on
the media gateway processor, this will be omitted.
pp Port number, if applicable. If the fault occurred on
the media gateway processor or on a media module as a
whole, this will be omitted.ro DisplayString .1.3.6.1.4.1.6889.2.9.1.5.2.1.1 |
cmgTrapOnBoardExpected values are 'no' and 'yes'. If a problem is on-board,
replacing the media module is likely to resolve the problem.ro DisplayString .1.3.6.1.4.1.6889.2.9.1.5.2.1.2 |
cmgTrapSubsystemThe high-level subsystem that generated the trap.
Expected values are 'HW', 'SW', and 'Net'.ro DisplayString .1.3.6.1.4.1.6889.2.9.1.5.2.1.3 |
cmgTrapOnIccMissingShould the media gateway send a trap on startup if there is no
integrated communications controller in slot 1?rw Enumeration .1.3.6.1.4.1.6889.2.9.1.5.2.1.4 |
cmgTrapModuleA display string to identify the module type in module
insert and remove traps.ro DisplayString .1.3.6.1.4.1.6889.2.9.1.5.2.1.5 |
cmgTrapSeverityThe severity of the notification.ro CmgItuPerceivedSeverity .1.3.6.1.4.1.6889.2.9.1.5.2.1.6 |
cmgProductIdThe Product Id of Avaya Device - 10 characters.ro DisplayString .1.3.6.1.4.1.6889.2.9.1.5.2.1.7 |
cmgTrapAvailableTimeslotsNumber of Timeslots available on this gateway.ro Integer32 .1.3.6.1.4.1.6889.2.9.1.5.2.1.8 |
cmgTrapInUseTimeslotsNumber of Timeslots in use on this gateway.ro Integer32 .1.3.6.1.4.1.6889.2.9.1.5.2.1.9 |
cmgTrapTypes OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.9.1.5.2.2 |
cmgTrapV3separator OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.9.1.5.2.2.0 |
cmgMultipleFanFaultAt least two fans have been operating at less than 90% of their
nominal speed for five minutes or more. This may be an early
warning of overheating. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.2 |
cmgMultipleFanClearAt least three fans are operating normally. The system should
be operable indefinitely without overheating. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.3 |
cmgPsuFanBriefFaultThe power supply fan has been operating at less than 90% of its
optimal speed for 10 minutes or more, but less than 15 minutes.
This may be an early warning of overheating. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.4 |
cmgPsuFanBriefClearThe power supply fan is operating normally. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.5 |
cmgPsuFanProlongedFaultThe power supply fan has been operating at less than 90% of its
optimal speed for 15 minutes or more. This may be an early
warning of overheating. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.6 |
cmgPsuFanProlongedClearThe power supply fan is operating normally. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.7 |
cmgCpuTempWarningFaultThe temperature sensor at the CPU has exceeded its warning threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.10 |
cmgCpuTempWarningClearThe temperature sensor at the CPU has dropped below its warning
threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.11 |
cmgDspTempWarningFaultThe temperature sensor at the DSP complex has exceeded its
warning threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.12 |
cmgDspTempWarningClearThe temperature sensor at the DSP complex has dropped below its
warning threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.13 |
cmgTempShutdownFaultThe CPU temperature sensor has exceeded its shutdown threshold.
The system is about to begin controlled shutdown. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.14 |
cmgMgpPowerFaultThe voltage reading at the +5.1v power source serving the MG
Processor is out of tolerance. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.16 |
cmgMgpPowerClearThe voltage reading at the +5.1v power source serving the MG
Processor is back within its tolerance range. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.17 |
cmgMediaModulePowerFaultThe voltage reading at the -48v power source serving the media modules
is out of tolerance. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.18 |
cmgMediaModulePowerClearThe voltage reading at the -48v power source serving the media modules
is back within its tolerance range. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.19 |
cmgVoipPowerFaultThe voltage reading at the +3.4v power source serving the VoIP
complexes is out of tolerance. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.20 |
cmgVoipPowerClearThe voltage reading at the +3.4v power source serving the VoIP
complexes is back within its tolerance range. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.21 |
cmgDspPowerFaultThe voltage reading at the +1.58v power source serving the DSP units
is out of tolerance. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.22 |
cmgDspPowerClearThe voltage reading at the +1.58v power source serving the DSP units
is back within its tolerance range. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.23 |
cmg8260PowerFaultThe voltage reading at the +2.5v power source serving the 8260
processor is out of tolerance. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.24 |
cmg8260PowerClearThe voltage reading at the +2.5v power source serving the 8260
processor is back within its tolerance range. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.25 |
cmgAuxPowerFaultThe voltage reading at the -48v auxiliary power source serving the
end points is out of tolerance. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.26 |
cmgAuxPowerClearThe voltage reading at the -48v auxiliary power source serving the
end points is back within its tolerance range. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.27 |
cmgFanPowerFaultThe voltage at the +12 auxiliary power source serving the fans is
out of tolerance. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.28 |
cmgFanPowerClearThe voltage at the +12 auxiliary power source serving the fans is
back within its tolerance range. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.29 |
cmgSyncSignalFaultSynchronization signal lost. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.30 |
cmgSyncSignalClearSynchronization signal normal. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.31 |
cmgVoipHardwareFaultOne or more of the DSP complexes serving VoIP engines has failed. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.32 |
cmgVoipHardwareClearAll the DSP complexes serving VoIP engines are back in service. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.33 |
cmgSyncSignalWarnSynchronization signal lost. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.34 |
cmgSyncWarnClearSynchronization signal normal. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.35 |
cmgSyncSignalExcessThe synchronization signal source (primary or secondary) is experiencing excessive failures in a short period of time causing excessive switching to an alternate source. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.36 |
cmgSyncExcessClearSynchronization signal source which was causing excessive switching due to excessive failures is now normal. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.37 |
cmgModuleRemoveA media module has been removed. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.50 |
cmgModuleInsertFaultMedia module insertion sequence has failed. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.52 |
cmgModuleInsertSuccessA media module has been inserted. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.53 |
cmgMgBusyoutAn administrator has moved a media module or port to
the busy-out state. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.54 |
cmgMgReleaseAn administrator has moved a media module or port from the
busy-out state back into service. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.55 |
cmgUnsupportedMmEnrolementThe event is sent when a module is inserted to a slot where it can be identified
but not supported due to hardware limitations. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.56 |
cmgDataModuleAwohConflictThis event is generated when a data module is found in a slot that was Administered
without hardware as a voice module in the call controller. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.57 |
cmgFirmwareDownloadBegunThe media gateway has begun download of a software module. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.70 |
cmgFirmwareDownloadSuccessThe media gateway has completed successful download of a software module. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.71 |
cmgRegistrationSuccessThe media gateway has successfully registered with a controller. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.73 |
cmgMgManualResetThe media gateway is beginning a user-requested reset operation. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.74 |
cmgModuleManualResetA media module is beginning a user-requested reset operation. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.75 |
cmgVoipManualResetA VoIP engine is beginning a user-requested reset operation. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.76 |
cmgDsuManualResetAn E1/T1 DSU is beginning a user-requested reset operation. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.77 |
cmgConfigUploadBegunThe media gateway has begun upload of a configuration file. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.78 |
cmgConfigUploadSuccessThe media gateway has completed successful upload of a configuration file. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.79 |
cmgMemoryFaultMain processor memory has issued a failure warning. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.90 |
cmgMemoryClearMain processor memory is back in normal service. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.91 |
cmgDhcpRequestFaultThe media gateway cannot contact its DHCP server, or the server
failed to respond to a request. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.92 |
cmgDhcpRequestClearThe media gateway has received a successful response to a DHCP request. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.93 |
cmgFirmwareDownloadFaultAn attempt to download a software module has failed. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.94 |
cmgProcessRestartOne or more media gateway software processes have terminated and
been restarted by the software task manager. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.96 |
cmgProcessRestartClearMedia gateway software processes are running normally. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.97 |
cmgIccMissingFaultAn Internal Communications Controller expected in slot 1 is missing. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.98 |
cmgIccMissingClearThe Internal Communications Controller expected in slot 1 is present. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.99 |
cmgIccAutoResetThe Media gateway has automatically reset the Internal
Communications Controller. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.100 |
cmgIccAutoResetClearThe Internal Communications Controller is running normally. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.101 |
cmgPrimaryControllerFaultThe media gateway cannot contact the first controller
in its controller list. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.102 |
cmgPrimaryControllerClearThe media gateway has successfully contacted the first controller
in its controller list. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.103 |
cmgNoControllerFaultThe media gateway cannot contact any controller in its controller lists. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.104 |
cmgNoControllerClearThe media gateway has successfully contacted one of the controllers
in its controller lists. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.105 |
cmgRegistrationFaultThe media gateway cannot register with any controller
in its controller list. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.106 |
cmgH248LinkDownThe H.248 link between the media gateway and its controller is down. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.108 |
cmgH248LinkUpThe H.248 link between the media gateway and its controller
is back in service. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.109 |
cmgTestFaultA maintenance test has failed. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.110 |
cmgTestClearFailed maintenance tests have succeeded. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.111 |
cmgTestThresholdFaultMaintenance test failure count has exceeded its
reporting threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.112 |
cmgTestThresholdClearMaintenance test failure count has dropped below
its reporting threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.113 |
cmgMgAutoResetThe media gateway is beginning automatic reinitialization. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.114 |
cmgModuleAutoResetOne of the media modules is beginning automatic reinitialization. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.116 |
cmgModuleAutoResetClearThe reset media module is running normally. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.117 |
cmgModulePostFaultA media module has failed its power-on startup test. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.118 |
cmgModulePostClearMedia module power-on startup test successful. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.119 |
cmgModuleParameterFaultA media module has failed its parameter exchange. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.120 |
cmgModuleParameterClearMedia module parameter exchange successful. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.121 |
cmgConfigUploadFaultAn attempt to upload a configuration file has failed. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.122 |
cmgVoipOccFaultOne or more of the VoIP engines in the media gateway is over
its occupancy threshold, as measured by a snapshot:
(Channels In Use)/(Total Channels). NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.124 |
cmgVoipOccClearAll the VoIP engines in the media gateway are operating below
occupancy threshold, as measured by a snapshot:
(Channels In Use)/(Total Channels). NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.125 |
cmgVoipAvgOccFaultOne or more of the VoIP engines in the media gateway is over
its average occupancy threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.126 |
cmgVoipAvgOccClearAll the VoIP engines in the media gateway are operating below
occupancy threshold, as measured by a snapshot:
(Channels In Use)/(Total Channels). NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.127 |
cmgVoipAutoResetA VoIP engine has begun automatic reset. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.128 |
cmgVoipAutoResetClearA VoIP engine has completed automatic reset, and is running normally. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.129 |
cmgDsuFpgaConfigureFaultThe DSU in one of the E1/T1 media modules failed to
configure its Field Programmable Gateway Array. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.130 |
cmgDsuFpgaConfigureClearThe DSU in one of the E1/T1 media modules has successfully
configured its Field Programmable Gateway Array. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.131 |
cmgDsuAutoResetA DSU in one of the E1/T1 media modules has begun automatic reset. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.132 |
cmgDsuAutoResetClearA DSU in one of the E1/T1 media modules has completed automatic
reset, and is running normally. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.133 |
cmgDsuDteDtrFaultOne of the E1/T1 media modules has detected that the DTR signal from
its DTE is off. This indicates that the DTE is not connected or not
functioning. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.134 |
cmgDsuDteDtrClearOne of the E1/T1 media modules has detected that the DTR signal from
its DTE is back to normal. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.135 |
cmgDsuDteRtsFaultAn E1/T1 media module has detected that the RTS signal from its
DTE is not on whenever the DTE requests to send data and during
data transfer. This indicates that the DTE is not functioning. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.136 |
cmgDsuDteRtsClearAn E1/T1 media module has detected that the RTS signal from its
DTE is back to normal. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.137 |
cmgDsuTxDFaultAn E1/T1 media module has detected that the data received from the
local DTE to be sent to the far end is either all ones or all zeroes. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.138 |
cmgDsuTxDClearThe E1/T1 media module is receiving normal data from the local
DTE to be sent to the far end. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.139 |
cmgDsuRxDFailureAn E1/T1 media module has detected that the data received from the
far end to be sent to the local DTE is either all ones or all zeroes. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.140 |
cmgDsuRxDClearThe E1/T1 media module is receiving normal data from the far end
to be sent to the local DTE. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.141 |
cmgVoipIpConfigFaultThere is an IP configuration failure in the VoIP Engine.
No static IP address has been supplied or the firmware is getting
indications that this is a duplicate IP address. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.142 |
cmgVoipIpConfigClearThe IP configuration of the VoIP Engine is successful. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.143 |
cmgConfigDownloadFaultAn attempt to download a configuration file has failed. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.144 |
cmgConfigDownloadBegunThe media gateway has begun download of a configuration file. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.145 |
cmgConfigDownloadSuccessThe media gateway has completed successful download of a configuration file. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.146 |
cmgTimeslotOccupancyFaultTimeslot usage is over the occupancy threshold,
as measured by a snapshot:
(Timeslots In Use)/(Total Timeslots). NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.147 |
cmgTimeslotOccupancyClearTimeslot usage is below the occupancy threshold,
as measured by a snapshot:
(Timeslots In Use)/(Total Timeslots). NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.148 |
cmgTimeslotAvailabilityFaultNo more Timeslot are available on this gateway. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.149 |
cmgTimeslotAvailabilityClearTimeslots are again available on this gateway,
usage is below the occupancy threshold,
as measured by a snapshot:
(Timeslots In Use)/(Total Timeslots). NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.0.150 |
cmgFirmwareDownloadWarningNon critical event occur during attempt to download a software module. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.9.1.5.2.2.95 |
cmgContactClosures OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.9.1.6 |
cmgContactClosuresTableThis table is used for managing contact closure adjunct port.
The adjunct box contains two relays. SEQUENCE OF CmgContactClosuresEntry .1.3.6.1.4.1.6889.2.9.1.6.1 |
cmgContactClosuresEntry CmgContactClosuresEntry .1.3.6.1.4.1.6889.2.9.1.6.1.1 |
cmgCcModulero INTEGER (10) .1.3.6.1.4.1.6889.2.9.1.6.1.1.1 |
cmgCcPortro INTEGER (1) .1.3.6.1.4.1.6889.2.9.1.6.1.1.2 |
cmgCcRelayEach contact closure port can control two relays on the adjunctro INTEGER .1.3.6.1.4.1.6889.2.9.1.6.1.1.3 |
cmgCcAdminStateThe admin state of the contact-closure where:
Auto(1): The Contact Closure is controlled by the call
Controller.
Trigger(2): The contact closure relay is triggered.
Off(3): The contact closure relay is off (not triggered).rw Enumeration .1.3.6.1.4.1.6889.2.9.1.6.1.1.4 |
cmgCcPulseDurationThe number of second the relay is triggred after each pulse activation
signal is received from the call-controller.rw INTEGER .1.3.6.1.4.1.6889.2.9.1.6.1.1.5 |
cmgCcStatusThe actual contact closure relay statero Enumeration .1.3.6.1.4.1.6889.2.9.1.6.1.1.6 |
cmgETR OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.9.1.7 |
cmgETRTableEmergency Transfer Function Table (short circuit
Line and Trunk ports in case of call-controller connectivity
problems) SEQUENCE OF CmgETREntry .1.3.6.1.4.1.6889.2.9.1.7.1 |
cmgETREntry CmgETREntry .1.3.6.1.4.1.6889.2.9.1.7.1.1 |
cmgEtrModuleModule number - 10 on G450ro INTEGER .1.3.6.1.4.1.6889.2.9.1.7.1.1.1 |
cmgEtrAdminStateModule's ETR administration state where:
off(1): ETR is turned off without checking if there
is an active call among trunk-line port pairs
auto(2): ETR is turned off as soon as the module is
operational (controlled by a call controller)
on(3): ETR is never turned offrw Enumeration .1.3.6.1.4.1.6889.2.9.1.7.1.1.2 |
cmgEtrNumberOfPairsThe number of ETR TRUNK-LINE pairsro INTEGER .1.3.6.1.4.1.6889.2.9.1.7.1.1.3 |
cmgEtrStatusThe current status of the ETR functionro Enumeration .1.3.6.1.4.1.6889.2.9.1.7.1.1.4 |
cmgEtrCurrentLoopDetectEach bit in the bit-mask represents a current-loop-detector of one
trunk-line ETR pairs. The bit is set when current is detectedrw OCTET STRING .1.3.6.1.4.1.6889.2.9.1.7.1.1.5 |
cmgDynamicCAC OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.9.1.8 |
cmgDynCacStatusDynamic CAC statusro Enumeration .1.3.6.1.4.1.6889.2.9.1.8.1 |
cmgDynCacRBBLThe last Reported BBL value sent to the MGCro Integer32 .1.3.6.1.4.1.6889.2.9.1.8.2 |
cmgDynCacLastUpdateThe last time (sysUpTime) a 'dynamic CAC' event was sent to the MGCro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.6889.2.9.1.8.3 |