AVAYA-SURV-MIB
AI MIB Summary
The AVAYA-SURV-MIB provides SNMP visibility into the R4.1 Standard Local Survivability (SLS) state of Avaya gateways, enabling monitoring of H.248 controller registration status and the maintenance of local IP phone calls during call controller failures. It exposes configuration and status tables for specific survivability resources, including stations, trunk groups, dial plans (ARS), codec sets, and physical interfaces (DS1, BRI, slots) to verify that the gateway is operating in fallback mode and managing active shuffled calls.
R4.1 Standard Local Survivability (SLS) MIB This module defines an interface to Survivability mode of operation.This allows a gateway to have a basic set of call features if it loses communication with a main call controller (CC). When the gateway is in survivabilty mode of operation, it will continue to register to H.248 controller IP addresses in the MGC list. If a re-registration to the H.248 controller can be made, the survivability mode will be disabled and any new calls will be managed by the MGC. Active calls between two local IP phones will be maintained because they are established as shuffled calls. Copyright notice: This AVAYA SNMP Management Information Base Specification (Specification)embodies AVAYA confidential and Proprietary intellectual property. AVAYA retains all Title and ownership in the Specification, including any revisions. It is AVAYA's intent to encourage the widespread use of this Specification in connection with the management of AVAYA products. AVAYA grants vendors, end-users, and other interested parties non-exclusive license to use this Specification in connection with the management of AVAYA products. This Specification is supplied 'as is', and AVAYA makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. avSurvMib | + .0 avSurvNotification | + .1 avSurvConfig | + .2 avSurvStationTable | (index: avSurvStationIndex) | + .3 avSurvTrunkGroupTable | (index: avSurvTrunkGroupNum) | + .4 avSurvTrunkTable | (indexes: avSurvTrunkRefNumber, | avSurvTrunkIndex) | + .5 avSurvArsTable | (index: avSurvDialIndex) | + .6 avSurvFacTable | (index: avSurvFacIndex) | + .7 avSurvIpVoiceCodecSetTable | (indexes: avSurvIpVoiceCodecSetNum,) | avSurvIpVoiceCodecSetIndex) | + .8 avSurvIpCodecSetConfig | | + .9 avSurvSlotConfigTable | (index: avSurvSlotConfigIndex) | + .10 avSurvDs1Table | (index: avSurvDs1Index) | + .11 avSurvSigGroupTable | (index: avSurvSigGroupIndex) | + .12 avSurvBriTable | (index: avSurvBriIndex) | + .13 avSurvIncomingRoutingTable | (indexes: avSurvIncomingRoutingGroupRefNumber, | avSurvIncomingRoutingIndex) | + .14 avSurvNfasTable | (indexes: avSurvNfasSigGroupRefNumber, | avSurvNfasIndex) | + .15 Add G430 values for avSurvMaxIPReg and avSurvBriIndex. | Change avSurvBriIndex to be 1..64 instead of 1..24.
Main OID:
avSurvMib.1.3.6.1.4.1.6889.2.6.4
172
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
172 total| Object Name |
|---|
avSurvMibR4.1 Standard Local Survivability (SLS) MIB This module defines an interface to Survivability mode of operation.This allows a gateway to have a basic set of call features if it loses communication with a main call controller (CC). When the gateway is in survivabilty mode of operation, it will continue to register to H.248 controller IP addresses in the MGC list. If a re-registration to the H.248 controller can be made, the survivability mode will be disabled and any new calls will be managed by the MGC. Active calls between two local IP phones will be maintained because they are established as shuffled calls. Copyright notice: This AVAYA SNMP Management Information Base Specification (Specification)embodies AVAYA confidential and Proprietary intellectual property. AVAYA retains all Title and ownership in the Specification, including any revisions. It is AVAYA's intent to encourage the widespread use of this Specification in connection with the management of AVAYA products. AVAYA grants vendors, end-users, and other interested parties non-exclusive license to use this Specification in connection with the management of AVAYA products. This Specification is supplied 'as is', and AVAYA makes no warranty, either express or implied, as to the use, operation, condition, or performance of the Specification. avSurvMib | + .0 avSurvNotification | + .1 avSurvConfig | + .2 avSurvStationTable | (index: avSurvStationIndex) | + .3 avSurvTrunkGroupTable | (index: avSurvTrunkGroupNum) | + .4 avSurvTrunkTable | (indexes: avSurvTrunkRefNumber, | avSurvTrunkIndex) | + .5 avSurvArsTable | (index: avSurvDialIndex) | + .6 avSurvFacTable | (index: avSurvFacIndex) | + .7 avSurvIpVoiceCodecSetTable | (indexes: avSurvIpVoiceCodecSetNum,) | avSurvIpVoiceCodecSetIndex) | + .8 avSurvIpCodecSetConfig | | + .9 avSurvSlotConfigTable | (index: avSurvSlotConfigIndex) | + .10 avSurvDs1Table | (index: avSurvDs1Index) | + .11 avSurvSigGroupTable | (index: avSurvSigGroupIndex) | + .12 avSurvBriTable | (index: avSurvBriIndex) | + .13 avSurvIncomingRoutingTable | (indexes: avSurvIncomingRoutingGroupRefNumber, | avSurvIncomingRoutingIndex) | + .14 avSurvNfasTable | (indexes: avSurvNfasSigGroupRefNumber, | avSurvNfasIndex) | + .15 Add G430 values for avSurvMaxIPReg and avSurvBriIndex. | Change avSurvBriIndex to be 1..64 instead of 1..24. MODULE-IDENTITY .1.3.6.1.4.1.6889.2.6.4 |
avSurvNotification OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.6.4.0 |
avSurvEnabledThis trap indicates that survivability.o has been administratively enabled. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.6.4.0.1 |
avSurvDisabledThis trap indicates that survivability.o has been administratively disabled. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.6.4.0.2 |
avSurvActiveThis trap indicates that survivability.o is now the call controller of record and is processing calls. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.6.4.0.3 |
avSurvInactiveThis trap indicates that survivability.o has stopped processing calls. A more powerful controller may have taken over, either an LSP or a primary call controller. NOTIFICATION-TYPE .1.3.6.1.4.1.6889.2.6.4.0.4 |
avSurvConfig OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.6.4.1 |
avSurvAdminStateAllows craft or PIM to enable the SLS call engine or read its current staterw Enumeration .1.3.6.1.4.1.6889.2.6.4.1.1 |
avSurvStatusCurrent operational status of SLS call enginero Enumeration .1.3.6.1.4.1.6889.2.6.4.1.2 |
avSurvMaxIPRegMaximum IP phone registrations allowed. Gateway SLS firmware will restrict per model. G250 R3.0 = 10; G250 R3.1 and R4.0 = 12; G350 R4.0 = 72; IG550 [Juniper gateways(4350, 6350) R4.0 = 100; IG550 [Juniper gateways(2320, 2350) R4.1 = 100; G450 R4.1 =240 G430 = 150rw Integer32 .1.3.6.1.4.1.6889.2.6.4.1.3 |
avSurvDateFormatDate Format. This is used for calendar/clock display on DCP & IP phonesrw Enumeration .1.3.6.1.4.1.6889.2.6.4.1.4 |
avSurvEndDLTimeStampDate/Timestamp of last download from PIM. This is written by PIM after it completes initialization of all configuration parametersrw DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.6889.2.6.4.1.5 |
avSurvNotificationSeveritySeverity of last sent trapro Enumeration .1.3.6.1.4.1.6889.2.6.4.1.6 |
avSurvConfigCommandClear Running Configuration Command, write onlyrw Enumeration .1.3.6.1.4.1.6889.2.6.4.1.7 |
avSurvGatewayNumberGateway Identification Number (see CM Media Gateway form)ro Integer32 .1.3.6.1.4.1.6889.2.6.4.1.8 |
avSurvPimLockoutAllows Craft to prevent PIM updates from being downloaded during local diagnostic sessionrw Enumeration .1.3.6.1.4.1.6889.2.6.4.1.9 |
avSurvAttendantAccessCodeAllows a station in the branch office to be able to directly dial an attendant positionrw DisplayString .1.3.6.1.4.1.6889.2.6.4.1.10 |
avSurvAttendantExtensionSpecifies the station which shall serve as the branch office attendant position. Used as destination to direct un-routable incoming trunk calls.rw DisplayString .1.3.6.1.4.1.6889.2.6.4.1.11 |
avSurvStationTableStation Table SEQUENCE OF AvSurvStationEntry .1.3.6.1.4.1.6889.2.6.4.2 |
avSurvStationEntryEach entry contains index, extension number, type, interface bit map, COR, trunk-destination status, expansion-module, slot/port, switchhook-flash, IP address of registered station, and station name AvSurvStationEntry .1.3.6.1.4.1.6889.2.6.4.2.1 |
avSurvStationIndexStation Table Indexrw Integer32 .1.3.6.1.4.1.6889.2.6.4.2.1.1 |
avSurvStationExtStation Extension numberrw DisplayString .1.3.6.1.4.1.6889.2.6.4.2.1.2 |
avSurvStationTypeStation model typerw Enumeration .1.3.6.1.4.1.6889.2.6.4.2.1.3 |
avSurvStationInterfaceIndexInterface Index bit map. Bit assignment as follows: bits 0-7 = port, bits 8-11 = slot, bits 12-23 = unused, bits 24-31 = module type. Note: This element has been deprecated in SLS R4.1. For legacy stations, use avSurvStationSlotPort to communicate slot-port info.rw Integer32 .1.3.6.1.4.1.6889.2.6.4.2.1.4 |
avSurvStationCORStation Class of Outgoing Restriction (COR) levelrw Enumeration .1.3.6.1.4.1.6889.2.6.4.2.1.5 |
avSurvStationTrunkDestStation trunk destination. Can be used to answer incomming trunk callsrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6889.2.6.4.2.1.6 |
avSurvStationRowStatusCreate/Delete a row entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6889.2.6.4.2.1.7 |
avSurvStationExpansionModuleStation set has an expansion module in place. This is only allowed for the digital phones (IP and DCP. IP phone models 4620, 4621, 4625 may use EU24 and EU24BL. DCP phone models 2420 may use EU24 and EU24BL. DCP phone models 6416 and 6424 may use modesl 801A and XM24.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6889.2.6.4.2.1.8 |
avSurvStationSlotPortCM slot/port in the Vyxx formatrw DisplayString .1.3.6.1.4.1.6889.2.6.4.2.1.9 |
avSurvStationSwitchHookFlashSwitchhook flash is allowed only for analog phonesrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6889.2.6.4.2.1.10 |
avSurvStationIpAddressRegisteredIP address of registered IP station. Note only for IP stationsro OCTET STRING .1.3.6.1.4.1.6889.2.6.4.2.1.11 |
avSurvStationNameStation or user's Namerw DisplayString .1.3.6.1.4.1.6889.2.6.4.2.1.12 |
avSurvTrunkGroupTableTrunk Group Table SEQUENCE OF AvSurvTrunkGroupEntry .1.3.6.1.4.1.6889.2.6.4.3 |
avSurvTrunkGroupEntryEach entry contains index(ACM Trunk Group Number), trunk-type, Trunk Access Code, and dial-mode AvSurvTrunkGroupEntry .1.3.6.1.4.1.6889.2.6.4.3.1 |
avSurvTrunkGroupNumTrunk Group Numberrw INTEGER .1.3.6.1.4.1.6889.2.6.4.3.1.1 |
avSurvTrunkGroupTypeTrunk Group Typerw Enumeration .1.3.6.1.4.1.6889.2.6.4.3.1.2 |
avSurvTrunkGroupTACTrunk Group Trunk Access Code (TAC)rw DisplayString .1.3.6.1.4.1.6889.2.6.4.3.1.3 |
avSurvTrunkGroupDialTrunk Group Outward Dial. Note MF not supported in SLSrw Enumeration .1.3.6.1.4.1.6889.2.6.4.3.1.4 |
avSurvTrunkGroupRowStatusCreate/Delete a row entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6889.2.6.4.3.1.5 |
avSurvTrunkGroupDidDigitTreatmentTrunk Group DID digit treatment option. This applies for analog DID trunks and non-ISDN digital tie trunks. Note: blank means take no action.rw Enumeration .1.3.6.1.4.1.6889.2.6.4.3.1.6 |
avSurvTrunkGroupDidDigitsInsertDigit string to be inserted for DID treatment This applies for analog DID trunks and non-ISDN digital tie trunks.rw DisplayString .1.3.6.1.4.1.6889.2.6.4.3.1.7 |
avSurvTrunkGroupDidSupervisionType of incoming supervision used on DID trunk. This applies only for analog DID trunks.rw Enumeration .1.3.6.1.4.1.6889.2.6.4.3.1.8 |
avSurvTrunkGroupNameCustomer's name for trunk grouprw DisplayString .1.3.6.1.4.1.6889.2.6.4.3.1.9 |
avSurvTrunkGroupCodesetDisplayWhich Q.931 codesets are allowed to send Display IE's to the user phones This applies only to ISDN BRI/PRI trunks.rw Enumeration .1.3.6.1.4.1.6889.2.6.4.3.1.10 |
avSurvTrunkGroupCodesetNationalWhich codesets are allowed to send National supported IE's. This applies only to ISDN BRI/PRI trunks.rw Enumeration .1.3.6.1.4.1.6889.2.6.4.3.1.11 |
avSurvTrunkGroupChannelPreferenceUsed for encoding Channel-ID IE. This applies only to ISDN BRI/PRI trunks.rw Enumeration .1.3.6.1.4.1.6889.2.6.4.3.1.12 |
avSurvTrunkGroupDigitHandlingDefines overlap receiving and transmitting rules. This applies only to ISDN BRI/PRI trunks.rw Enumeration .1.3.6.1.4.1.6889.2.6.4.3.1.13 |
avSurvTrunkGroupJapanDisconnectSend a Q.931 CONNECT msg right before sending DISCONNECT msg. This applies only to ISDN BRI/PRI trunks in Japan.rw Enumeration .1.3.6.1.4.1.6889.2.6.4.3.1.14 |
avSurvTrunkGroupSendNameSpecifies whether Calling, Connected, Called party's name is to be shared with network. This applies only to ISDN BRI/PRI trunks. Default is no.rw Enumeration .1.3.6.1.4.1.6889.2.6.4.3.1.15 |
avSurvTrunkGroupSendCallingNumberSpecifies how to fill the Calling-Party and Called-Party IE fields. This applies only to ISDN BRI/PRI trunks. Default is no.rw Enumeration .1.3.6.1.4.1.6889.2.6.4.3.1.16 |
avSurvTrunkGroupNumberingFormatSpecifies how to fill the Calling-Party and Called-Party IE fields. This applies only to ISDN BRI/PRI trunks. SLS only supports unknown(1) and public(2). Default is unknown.rw Enumeration .1.3.6.1.4.1.6889.2.6.4.3.1.17 |
avSurvTrunkGroupIncomingDestinationAnalog DID and non-ISDN Digital:Sets a destination station for routing incoming trunk group callsrw DisplayString .1.3.6.1.4.1.6889.2.6.4.3.1.18 |
avSurvTrunkGroupIncomingDialToneAnalog DID and non-ISDN Digital:Determines whether SLS is to supply dial tone in response to far-end seizurerw Enumeration .1.3.6.1.4.1.6889.2.6.4.3.1.19 |
avSurvTrunkGroupR2MFCSignalingDetermines MFC signaling set to be used. This only applies to R2MFC trunks. This feature not supported in SLS for R4.0rw Enumeration .1.3.6.1.4.1.6889.2.6.4.3.1.20 |
avSurvTrunkGroupTrunkHuntDetermines the method in which the SLS call engine selects from the trunk group pool of available trunks. This only applies to digital trunks.rw Enumeration .1.3.6.1.4.1.6889.2.6.4.3.1.21 |
avSurvTrunkGroupDs1SupervisionApplies to non-ISDN DS1 trunks: Specifies the type of incomming/outgoing supervision that is used on these trunks.rw Enumeration .1.3.6.1.4.1.6889.2.6.4.3.1.22 |
avSurvTrunkGroupCbcApplies to ISDN DS1 trunks: Specifies whether the trunk is to operate in call-by-call basis. If yes, then send the NSF IE.rw Enumeration .1.3.6.1.4.1.6889.2.6.4.3.1.23 |
avSurvTrunkGroupCbcServiceFeatureApplies to ISDN DS1 trunks: Specifies the type of service or feature specifed in the NSF IE for outbound trunk calls. Only valid if CBC=yes.rw Enumeration .1.3.6.1.4.1.6889.2.6.4.3.1.24 |
avSurvTrunkGroupCbcParameterApplies to ISDN DS1 trunks: Specifies the class of service being offered as part of Selective Class of Call Selection (scocs)service mode. Only valid if service mode is scocs.rw INTEGER .1.3.6.1.4.1.6889.2.6.4.3.1.25 |
avSurvTrunkGroupBusyDisconnectApplies to Analog Loop Start Trunks: Specifies whether the presence of busy tone signal will cause the trunk call to be disconnected. Default = no.rw Enumeration .1.3.6.1.4.1.6889.2.6.4.3.1.26 |
avSurvTrunkTableTrunk table SEQUENCE OF AvSurvTrunkEntry .1.3.6.1.4.1.6889.2.6.4.4 |
avSurvTrunkEntryEach entry contains dual index(group-reference-number and table index), interface bit map, slot-port, and sig-group reference-number AvSurvTrunkEntry .1.3.6.1.4.1.6889.2.6.4.4.1 |
avSurvTrunkGroupRefNumberTrunk Pool Group Reference Number - Association of trunk pool with trunk grouprw INTEGER .1.3.6.1.4.1.6889.2.6.4.4.1.1 |
avSurvTrunkIndextrunk table indexrw Integer32 .1.3.6.1.4.1.6889.2.6.4.4.1.2 |
avSurvTrunkInterfaceIndexInterface Index bit map. Bit assignment as follows: bits 0-7 = port, bits 8-11 = slot, bits 12-23 = unused, bits 24-31 = module type Note: This element has been deprecated in SLS R4.1. For legacy trunks, use avSurvTrunkSlotPort to communicate slot-port info.rw Integer32 .1.3.6.1.4.1.6889.2.6.4.4.1.3 |
avSurvTrunkRowStatusCreate/Delete a row entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6889.2.6.4.4.1.4 |
avSurvTrunkSlotPortACM slot/port in the Vyxx formatrw DisplayString .1.3.6.1.4.1.6889.2.6.4.4.1.5 |
avSurvTrunkSigGroupRefNumberSignaling Group Number that is the manager of this ISDN trunk memberrw INTEGER .1.3.6.1.4.1.6889.2.6.4.4.1.6 |
avSurvArsTableAutomatic Route Selection (ARS) Table SEQUENCE OF AvSurvArsEntry .1.3.6.1.4.1.6889.2.6.4.5 |
avSurvArsEntryEach entry contains index, dial-string-pattern, dial-plan-type, max-length, group-reference-number, dial-action, delete-digits, insert-digits, and min-length AvSurvArsEntry .1.3.6.1.4.1.6889.2.6.4.5.1 |
avSurvDialIndexCall Pattern indexrw Integer32 .1.3.6.1.4.1.6889.2.6.4.5.1.1 |
avSurvDialStringDialed string entry that is used to match a pattern within the user-dialed numberrw DisplayString .1.3.6.1.4.1.6889.2.6.4.5.1.2 |
avSurvDialTypeCall Typerw Enumeration .1.3.6.1.4.1.6889.2.6.4.5.1.3 |
avSurvDialMaximumLengthMaximum length of the user-dialed number that the survivability call-engine collects to match to the dialed-string. By default, the minimum length is defined to be equal to the length of the dialed stringrw INTEGER .1.3.6.1.4.1.6889.2.6.4.5.1.4 |
avSurvDialGroupRefNumberCall group reference numberrw INTEGER .1.3.6.1.4.1.6889.2.6.4.5.1.5 |
avSurvDialActionCall dial actionrw Enumeration .1.3.6.1.4.1.6889.2.6.4.5.1.6 |
avSurvDialRowStatusCreate/Delete a row entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6889.2.6.4.5.1.7 |
avSurvDialDeleteDigitsSpecifies the number of dialed digits to be deleted from the beginning of the stringrw INTEGER .1.3.6.1.4.1.6889.2.6.4.5.1.8 |
avSurvDialInsertDigitsSpecifies the digit string to be inserted. Includes ',' for pause.rw DisplayString .1.3.6.1.4.1.6889.2.6.4.5.1.9 |
avSurvDialMinimumLengthMinimum length of the user-dialed number that the survivability call-engine collects to match to the dialed-string. By default, the minimum length is defined to be equal to the length of the avSurvDialString elementrw INTEGER .1.3.6.1.4.1.6889.2.6.4.5.1.10 |
avSurvFacTableAutomatic Route Selection Facility Table SEQUENCE OF AvSurvFacEntry .1.3.6.1.4.1.6889.2.6.4.6 |
avSurvFacEntryEach entry contains index, an ARS Facility dialing code and the Type of FAC feature AvSurvFacEntry .1.3.6.1.4.1.6889.2.6.4.6.1 |
avSurvFacIndexFac Indexrw Integer32 .1.3.6.1.4.1.6889.2.6.4.6.1.1 |
avSurvFacIdARS Facility dialing coderw DisplayString .1.3.6.1.4.1.6889.2.6.4.6.1.2 |
avSurvFacRowStatusCreate/Delete a row entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6889.2.6.4.6.1.3 |
avSurvFacTypeFeature Access Code(FAC) dial codes Supportedrw Enumeration .1.3.6.1.4.1.6889.2.6.4.6.1.4 |
avSurvIpVoiceCodecSetTableIp Voice Codec Set Table SEQUENCE OF AvSurvIpVoiceCodecSetEntry .1.3.6.1.4.1.6889.2.6.4.7 |
avSurvIpVoiceCodecSetEntryEach entry contains dual index(cm-codec-set-num and table index), priority, codec-type, silence sup, number-of-frames AvSurvIpVoiceCodecSetEntry .1.3.6.1.4.1.6889.2.6.4.7.1 |
avSurvIpVoiceCodecSetNumIp Codec Set Identificationrw Integer32 .1.3.6.1.4.1.6889.2.6.4.7.1.1 |
avSurvIpVoiceCodecSetIndexIp Codec Indexrw Integer32 .1.3.6.1.4.1.6889.2.6.4.7.1.2 |
avSurvIpVoiceCodecSetPriorityPriority of codec set type (determines preferential use)rw INTEGER (1 .. 7) .1.3.6.1.4.1.6889.2.6.4.7.1.3 |
avSurvIpVoiceCodecSetTypeIp Codec Typerw Enumeration .1.3.6.1.4.1.6889.2.6.4.7.1.4 |
avSurvIpVoiceCodecSetSilenceIP Codec Silence Suppressionrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6889.2.6.4.7.1.5 |
avSurvIpVoiceCodecSetFramesIP Codec number of framesrw INTEGER .1.3.6.1.4.1.6889.2.6.4.7.1.6 |
avSurvIpVoiceCodecSetRowStatusCreate/Delete a row entryrw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6889.2.6.4.7.1.7 |
avSurvIpCodecSetConfig OBJECT IDENTIFIER .1.3.6.1.4.1.6889.2.6.4.8 |
avSurvIpCodecSetFaxModeFax operational protocol moderw Enumeration .1.3.6.1.4.1.6889.2.6.4.8.1 |
avSurvIpCodecSetFaxRedundancyRedundant packets encoded during fax moderw INTEGER (0 .. 3) .1.3.6.1.4.1.6889.2.6.4.8.2 |
avSurvIpCodecSetModemModeData modem protocol moderw Enumeration .1.3.6.1.4.1.6889.2.6.4.8.3 |
avSurvIpCodecSetModemRedundancyRedundant packets encoded for Modem moderw INTEGER (0 .. 3) .1.3.6.1.4.1.6889.2.6.4.8.4 |
avSurvIpCodecSetTtyModeTTY protocol moderw Enumeration .1.3.6.1.4.1.6889.2.6.4.8.5 |
avSurvIpCodecSetTtyRedundancyRedundant packets encoded for TTY moderw INTEGER (0 .. 3) .1.3.6.1.4.1.6889.2.6.4.8.6 |
avSurvIpCodecSetClearChanModeClear channel protocol mode. Preference for G711 wrappingrw Enumeration .1.3.6.1.4.1.6889.2.6.4.8.7 |
avSurvIpCodecSetClearChanRedundancyRedundant packets encoded for clear channel moderw INTEGER (0 .. 1) .1.3.6.1.4.1.6889.2.6.4.8.8 |
avSurvIpCodecSetEncryptPriority1Media Encryption type - 1st priorityrw Enumeration .1.3.6.1.4.1.6889.2.6.4.8.9 |
avSurvIpCodecSetEncryptPriority2Media Encryption type - 2nd priorityrw Enumeration .1.3.6.1.4.1.6889.2.6.4.8.10 |
avSurvIpCodecSetEncryptPriority3Media Encryption type - 3rd priorityrw Enumeration .1.3.6.1.4.1.6889.2.6.4.8.11 |
avSurvSlotConfigTableSlot Configuration Table SEQUENCE OF AvSurvSlotConfigEntry .1.3.6.1.4.1.6889.2.6.4.9 |
avSurvSlotConfigEntryEach entry contains an index, number id, board type, and row status AvSurvSlotConfigEntry .1.3.6.1.4.1.6889.2.6.4.9.1 |
avSurvSlotConfigIndexSlot Config Table Indexrw Integer32 .1.3.6.1.4.1.6889.2.6.4.9.1.1 |
avSurvSlotConfigNumberIdThis is the string identifier that CM uses to identify the slot of the media gateway. The first character is defined as a v followed by one decimal number, e.g. v1rw DisplayString .1.3.6.1.4.1.6889.2.6.4.9.1.2 |
avSurvSlotConfigBoardTypeType of media module in the associated slot mm312 has 24 low-density DCP station ports mm710 has one DS1 interface mm711 has 8 port universal analog mm712 has 8 DCP station ports mm714 has 4 analog trunk ports and 4 analog station ports mm716 has 24 high-density analog station ports mm717 has 24 high-density DCP station ports mm720 has 8 bri trunk ports (16 channels) mm722 has 2 bri trunk ports (4 channels) anaImm1t2l is G250 Internal media module 1 Analog Trunk + 2 Analog Lines anaImm4t2l is G250 Internal media module 4 Analog Trunks + 2 Analog Lines briImm is G250 Internal media module 2 port BRI dcpImm is G250 Internal media module 12 port DCP ds1Imm is G250 Internal media module DS1 tgm550 is IG550 telephony gateway module with 2 Analog Trunks + 2 Analog Lines tim508 is IG550 telephony interface module 8 analog station ports tim510 is IG550 telephony interface module DS1 tim514 is IG550 telephony interface module 4 Analog Trunks + 2 Analog stations tim516 is IG550 telephony interface module 16 analog station ports tim518 is IG550 telephony interface module 8 analog stations and 8 analog trunks tim521 is IG550 telephony interface module 4 port BRIrw Enumeration .1.3.6.1.4.1.6889.2.6.4.9.1.3 |
avSurvSlotConfigRowStatusCreate/Delete a row entry in this tablerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6889.2.6.4.9.1.4 |
avSurvDs1TableDS1 trunk instantiation Table SEQUENCE OF AvSurvDs1Entry .1.3.6.1.4.1.6889.2.6.4.10 |
avSurvDs1EntryEach entry contains an index, name, bit-rate, signaling-mode, channel numbering, connect, interface, side, country-protocol, protocol-version, bearer-capability, interface-companding, long-timer, and slot-number-id. AvSurvDs1Entry .1.3.6.1.4.1.6889.2.6.4.10.1 |
avSurvDs1IndexDS1 Table Indexrw Integer32 .1.3.6.1.4.1.6889.2.6.4.10.1.1 |
avSurvDs1NameName of the service provider and/or site destination of DS1 facilityrw DisplayString .1.3.6.1.4.1.6889.2.6.4.10.1.2 |
avSurvDs1BitRateMaximum transmission rate for DS1 interfacerw Enumeration .1.3.6.1.4.1.6889.2.6.4.10.1.3 |
avSurvDs1SignalingModeSelects the signaling method deployed on the given DS1 facilityrw Enumeration .1.3.6.1.4.1.6889.2.6.4.10.1.4 |
avSurvDs1ChannelNumberingChannel numbering scheme; E1 interface for ETSI and QSIG requires sequential encoding from 1 to 30rw Enumeration .1.3.6.1.4.1.6889.2.6.4.10.1.5 |
avSurvDs1ConnectSpecifies what type of equipment is at the far end of the DS1 linkrw Enumeration .1.3.6.1.4.1.6889.2.6.4.10.1.6 |
avSurvDs1InterfaceDetermines glare handlingrw Enumeration .1.3.6.1.4.1.6889.2.6.4.10.1.7 |
avSurvDs1SideQSIG glare handling when interface field is peerSlaverw Enumeration .1.3.6.1.4.1.6889.2.6.4.10.1.8 |
avSurvDs1CountryProtocolSpecifies the Layer 3 signaling protocol used by the country-specific service provider. This applies to ISDN trunk.rw Enumeration .1.3.6.1.4.1.6889.2.6.4.10.1.9 |
avSurvDs1ProtocolVersionUsed in countries whose public networks allow multiple Layer-3 signaling protocols for ISDN PRI service.rw Enumeration .1.3.6.1.4.1.6889.2.6.4.10.1.10 |
avSurvDs1BearerCapabilitySets the information transfer capability in the Bearer Capability IE of SETUP message for ISDN PRI service.rw Enumeration .1.3.6.1.4.1.6889.2.6.4.10.1.11 |
avSurvDs1InterfaceCompandingSpecifies the companding method used by the far-end switchrw Enumeration .1.3.6.1.4.1.6889.2.6.4.10.1.12 |
avSurvDs1LongTimerSpecifies whether the duration of the T302 and T303 Q.931 timers should be extended to a longer duration. Used for Russia country coderw Enumeration .1.3.6.1.4.1.6889.2.6.4.10.1.13 |
avSurvDs1RowStatusCreate/Delete a row entry in this tablerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6889.2.6.4.10.1.14 |
avSurvDs1SlotNumberIdThis is the string identifier that CM uses to identify the slot of the media gateway. The first character is defined as a v followed by one decimal number, e.g. v1rw DisplayString .1.3.6.1.4.1.6889.2.6.4.10.1.15 |
avSurvSigGroupTableSignaling Group, associated with an ISDN trunk group, Table SEQUENCE OF AvSurvSigGroupEntry .1.3.6.1.4.1.6889.2.6.4.11 |
avSurvSigGroupEntryEach entry contains an index, channel selection, associated signaling, primary D channel, and row status AvSurvSigGroupEntry .1.3.6.1.4.1.6889.2.6.4.11.1 |
avSurvSigGroupIndexSigGroup Table Indexrw Integer32 .1.3.6.1.4.1.6889.2.6.4.11.1.1 |
avSurvSigGroupChannelSelectionIf there is more than one trunk group assigned to this signaling group, the channel selection number is the trunk group that can accept incoming callsrw INTEGER .1.3.6.1.4.1.6889.2.6.4.11.1.2 |
avSurvSigGroupAssociatedSignalingSpecifies whether the D-channel is physically associated in the DS1 facility, yes = D-channel presentrw Enumeration .1.3.6.1.4.1.6889.2.6.4.11.1.3 |
avSurvSigGroupPrimaryDChannelThe identity for the D-channel 3 digit gw number + 2 character slot number + 2 digit port circuit numberrw DisplayString .1.3.6.1.4.1.6889.2.6.4.11.1.4 |
avSurvSigGroupRowStatusCreate/Delete a row entry in this tablerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6889.2.6.4.11.1.5 |
avSurvBriTableBRI trunk instantiation Table SEQUENCE OF AvSurvBriEntry .1.3.6.1.4.1.6889.2.6.4.12 |
avSurvBriEntryEach entry contains an index, name, interface, side, country-protocol, bearer-capability, interface-companding, tei-assignment, directory-numberA, directory-numberB, spidA, spidB, endpoint-initialization, layer1-stable, and slot-number-id. This table instantiation completely specifies a BRI circuit, consisting of channel B1 and channel B2 AvSurvBriEntry .1.3.6.1.4.1.6889.2.6.4.12.1 |
avSurvBriIndexBRI Table Index Note: G250-BRI supports 2 ports (4-channels) G350/IG550 is allocated a max of 24 ports (48-channels) G430/G450 is allocated a max of 64 ports (128 channels).rw Integer32 .1.3.6.1.4.1.6889.2.6.4.12.1.1 |
avSurvBriNameName of the service provider and/or site destination of BRI facilityrw DisplayString .1.3.6.1.4.1.6889.2.6.4.12.1.2 |
avSurvBriInterfaceDetermines glare handling. Non-QSIG calls: a-network, b-user; QSIG calls: a-peerMaster, b-peerSlaverw Enumeration .1.3.6.1.4.1.6889.2.6.4.12.1.3 |
avSurvBriSideQSIG glare handling when interface field is peerSlaverw Enumeration .1.3.6.1.4.1.6889.2.6.4.12.1.4 |
avSurvBriCountryProtocolSpecifies the Layer 3 signaling protocol used by the country-specific service providerrw Enumeration .1.3.6.1.4.1.6889.2.6.4.12.1.5 |
avSurvBriBearerCapabilitySets the information transfer capability in the Bearer Capability IE of SETUP messagerw Enumeration .1.3.6.1.4.1.6889.2.6.4.12.1.6 |
avSurvBriInterfaceCompandingSpecifies the companding method used )for all circuits on this media module) by the far-end switchrw Enumeration .1.3.6.1.4.1.6889.2.6.4.12.1.7 |
avSurvBriTeiAssignmentLAPD address assignment for TEI field, auto is assigned by network providerrw Enumeration .1.3.6.1.4.1.6889.2.6.4.12.1.8 |
avSurvBriDirectoryNumberAChannel B1's directory numberrw DisplayString .1.3.6.1.4.1.6889.2.6.4.12.1.9 |
avSurvBriDirectoryNumberBChannel B2's directory numberrw DisplayString .1.3.6.1.4.1.6889.2.6.4.12.1.10 |
avSurvBriSpidAService Provider Identifier required for Country Code 1 (USA) to be associated with channel B1rw DisplayString .1.3.6.1.4.1.6889.2.6.4.12.1.11 |
avSurvBriSpidBService Provider Identifier required for Country Code 1 (USA) to be associated with channel B2rw DisplayString .1.3.6.1.4.1.6889.2.6.4.12.1.12 |
avSurvBriEndpointInitDetermines whether the far end supports endpoint initializationrw Enumeration .1.3.6.1.4.1.6889.2.6.4.12.1.13 |
avSurvBriLayer1StableDetermines whether to expect the network to drop BRI layer 1 when no calls are active. yes = keep layer 1 stablerw Enumeration .1.3.6.1.4.1.6889.2.6.4.12.1.14 |
avSurvBriRowStatusCreate/Delete a row entry in this tablerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6889.2.6.4.12.1.15 |
avSurvBriSlotPortNumberIdThis is the string identifier formed by the combination of the slot identifier that CM uses to identify the slot of the media gateway(first character is a v followed by one numeric character). The port consists of two numeric characters that identify the first B-channel of the physical BRI port circuit(for example the 1st port is always 01).rw DisplayString .1.3.6.1.4.1.6889.2.6.4.12.1.16 |
avSurvIncomingRoutingTableIncoming Routing Table SEQUENCE OF AvSurvIncomingRoutingEntry .1.3.6.1.4.1.6889.2.6.4.13 |
avSurvIncomingRoutingEntryEach entry contains a dual index(trunk-group-reference-number and table index), match-pattern, delete-digits, insert-digits specification and routing-mode. This table instantiation completely specifies an the digit handling for an incoming dial-string pattern. Note 1: If the trunk-group employs Overlap Receiving, there will only be one entry (this may only have a delete or an insert operand). Note 2: If the trunk-group employs Enbloc Receiving, there may be a maximum of 50 entries. Each entry will have a Match-pattern, Length, Delete, and Insert element. AvSurvIncomingRoutingEntry .1.3.6.1.4.1.6889.2.6.4.13.1 |
avSurvIncomingRoutingGroupRefNumberIncoming trunk-group reference numberrw INTEGER .1.3.6.1.4.1.6889.2.6.4.13.1.1 |
avSurvIncomingRoutingIndexIncoming Routing Table Indexrw Integer32 .1.3.6.1.4.1.6889.2.6.4.13.1.2 |
avSurvIncomingRoutingMatchPatternDial-string entry that is used to match a pattern on inbound trunk calls. Note that '0' is used to designate the blank or empty string value as a wild card match.rw DisplayString .1.3.6.1.4.1.6889.2.6.4.13.1.3 |
avSurvIncomingRoutingLengthMaximum length of the user-dialed number that the SLS call-engine collects before beginning the pattern matching. Note that CM uses the blank as a wild card, subject to rule of the MatchPattern field being set to a wild card value as well.rw Enumeration .1.3.6.1.4.1.6889.2.6.4.13.1.4 |
avSurvIncomingRoutingDeleteDigitsSpecifies the number of dialed digits to be deleted from the beginning of the incoming trunk's received digit stringrw INTEGER .1.3.6.1.4.1.6889.2.6.4.13.1.5 |
avSurvIncomingRoutingInsertDigitsSpecifies the digit string to be inserted (after the deletion process has been completed) to the incoming trunk digit stringrw DisplayString .1.3.6.1.4.1.6889.2.6.4.13.1.6 |
avSurvIncomingRoutingModeDefines overlap receiving and transmitting rules. This applies only to ISDN BRI/PRI trunks.rw Enumeration .1.3.6.1.4.1.6889.2.6.4.13.1.7 |
avSurvIncomingRoutingRowStatusCreate/Delete a row entry in this tablerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6889.2.6.4.13.1.8 |
avSurvNfasTableSignaling Group Nfas , associated with an ISDN trunk group, Table SEQUENCE OF AvSurvNfasEntry .1.3.6.1.4.1.6889.2.6.4.14 |
avSurvNfasEntryEach entry contains a dual index(sig-group-reference-number and table index), interface string, interface id, and row status AvSurvNfasEntry .1.3.6.1.4.1.6889.2.6.4.14.1 |
avSurvNfasSigGroupRefNumberEntry pointing to the associated signaling group number in the signaling group tablerw INTEGER .1.3.6.1.4.1.6889.2.6.4.14.1.1 |
avSurvNfasIndexNfas Table Indexrw Integer32 .1.3.6.1.4.1.6889.2.6.4.14.1.2 |
avSurvNfasInterfaceThe identity for the NFAS DS1 facility group: 3 digit gateway number + 2 character slot numberrw DisplayString .1.3.6.1.4.1.6889.2.6.4.14.1.3 |
avSurvNfasInterfaceIdFor an NFAS circuit, this specifies the identification number of the DS1 circuit that is associated with this NFAS group. Note that this ID number must be coordinated with the PSTN provider so that the signaling protocol will operate correctly with respect to physical facility circuit selection.rw INTEGER .1.3.6.1.4.1.6889.2.6.4.14.1.4 |
avSurvNfasRowStatusCreate/Delete a row entry in this tablerw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.6889.2.6.4.14.1.5 |