FSP150-MIB
AI MIB Summary
The FSP150-MIB module facilitates SNMP-based monitoring and management of the Fujitsu FSP 150 Fibre Channel Storage Area Network (SAN) switch, exposing critical operational metrics including port status, error counters, buffer credits, and system health indicators. This module enables administrators to track performance statistics and fault conditions specific to the FSP 150 hardware platform for proactive infrastructure maintenance.
The FSP 150 2.6 MIB Revision: 1.1
Main OID:
fsp150MIB.1.3.6.1.4.1.2544.1.10.2
535
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
535 total| Object Name |
|---|
fsp150Products OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.10.1 |
fsp150CPThe value of sysObjectID for an agent running on a FSP 150CP. OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.10.1.1 |
fsp150MxThe value of sysObjectID for an agent running on a FSP 150MO or FSP 150ME. OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.10.1.2 |
fsp150MIBThe FSP 150 2.6 MIB Revision: 1.1 MODULE-IDENTITY .1.3.6.1.4.1.2544.1.10.2 |
fsp150TopologyMIB OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.10.2.1 |
fsp150LocalChassisTableThe roots of the trees managed by this agent. (There can be more than one if chassis are stacked and directly managed by one NEMI. Currently this is not supported.) SEQUENCE OF Fsp150LocalChassisEntry .1.3.6.1.4.1.2544.1.10.2.1.1 |
fsp150LocalChassisEntry Fsp150LocalChassisEntry .1.3.6.1.4.1.2544.1.10.2.1.1.1 |
fsp150LocalChassisProvAssignmentStateIs the chassis part of the logical configuration? Is it managed by this agent?ro Fsp150ProvAssignmentType .1.3.6.1.4.1.2544.1.10.2.1.1.1.1 |
fsp150LocalChassisProvEquipmentStateIs a chassis present? Note that this isn't necessarily the configured one, check for localChassisMismatch alarm. (During a firmware update the chassis is reported as unequipped because the internal communications link is used for the update and management access is not possible.)ro Fsp150ProvEquipmentType .1.3.6.1.4.1.2544.1.10.2.1.1.1.2 |
fsp150LocalChassisProvRequestChange the logical configuration. Writing accept adds the currently connected tree to the logical configuration. In case of a mismatch the old logical tree or parts of it are deleted (i.e. some ifIndex/entPhysicalIndex values become invalid). Writing delete removes the tree from the logical configuration. The value read back is always none.rw Fsp150ProvRequestType .1.3.6.1.4.1.2544.1.10.2.1.1.1.3 |
fsp150LocalChassisAgentAddrThe IP address of the SNMP agent managing the local system or zero if the local system is managed by this agent. (The NEMI running this agent may be fitted for monitoring purposes only without actually controlling the local system.) An address of 255.255.255.255 means that the manager is not reachable via IP/SNMP.ro IpAddress .1.3.6.1.4.1.2544.1.10.2.1.1.1.4 |
fsp150LocalChassisAgentPortThe UDP port used by the SNMP agent or zero.ro INTEGER .1.3.6.1.4.1.2544.1.10.2.1.1.1.5 |
fsp150PortIDTranslationTableMapping of device IDs and port numbers to ifIndex values. If another agent can 'see' a port via EFM, this table can be used to identify the port using information from the other agent's topology table. SEQUENCE OF Fsp150PortIDTranslationEntry .1.3.6.1.4.1.2544.1.10.2.1.2 |
fsp150PortIDTranslationEntry Fsp150PortIDTranslationEntry .1.3.6.1.4.1.2544.1.10.2.1.2.1 |
fsp150PortIDTranslationDevID MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2544.1.10.2.1.2.1.1 |
fsp150PortIDTranslationPortNum INTEGER .1.3.6.1.4.1.2544.1.10.2.1.2.1.2 |
fsp150PortIDTranslationIndexro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2544.1.10.2.1.2.1.3 |
fsp150ChassisIDTranslationTableMapping of device IDs to entPhysicalIndex values for chassis. SEQUENCE OF Fsp150ChassisIDTranslationEntry .1.3.6.1.4.1.2544.1.10.2.1.3 |
fsp150ChassisIDTranslationEntry Fsp150ChassisIDTranslationEntry .1.3.6.1.4.1.2544.1.10.2.1.3.1 |
fsp150ChassisIDTranslationDevID MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2544.1.10.2.1.3.1.1 |
fsp150ChassisIDTranslationIndexro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.10.2.1.3.1.2 |
fsp150TopologyTableInformation about how ports are connected to ports further down in the tree. (Note that this is not symmetrical.) SEQUENCE OF Fsp150TopologyEntry .1.3.6.1.4.1.2544.1.10.2.1.4 |
fsp150TopologyEntry Fsp150TopologyEntry .1.3.6.1.4.1.2544.1.10.2.1.4.1 |
fsp150TopologyProvAssignmentStateIs there a remote chassis configured for this port?ro Fsp150ProvAssignmentType .1.3.6.1.4.1.2544.1.10.2.1.4.1.1 |
fsp150TopologyProvEquipmentStateIs a remote chassis actually connected? (Note that this isn't necessarily the configured one. Check for remChassisMismatch alarm.)ro Fsp150ProvEquipmentType .1.3.6.1.4.1.2544.1.10.2.1.4.1.2 |
fsp150TopologyProvRequestChange the logical configuration. Writing accept adds the currently physically connected chassis/subtree to the logical configuration. In case of a mismatch the old logical subtree or parts of it are deleted (i.e. some ifIndex/entPhysicalIndex values become invalid). Writing delete removes the configured chassis/subtree. The value read back is always none.rw Fsp150ProvRequestType .1.3.6.1.4.1.2544.1.10.2.1.4.1.3 |
fsp150TopologyRemAgentAddrThe IP address of the SNMP agent managing the remote system or zero if the remote system is managed by the same agent. An address of 255.255.255.255 means that the manager is not reachable via IP/SNMP.ro IpAddress .1.3.6.1.4.1.2544.1.10.2.1.4.1.4 |
fsp150TopologyRemAgentPortThe UDP port used by the SNMP agent or zero.ro INTEGER .1.3.6.1.4.1.2544.1.10.2.1.4.1.5 |
fsp150TopologyRemChassisTypeThe type of the remote system. In case of a mismatch between logical and physical configuration the value from the logical configuration is reported.ro Fsp150ChassisType .1.3.6.1.4.1.2544.1.10.2.1.4.1.6 |
fsp150TopologyRemDevIDThe device ID of the remote system. The ID is only available when the system is physically connected.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2544.1.10.2.1.4.1.7 |
fsp150TopologyRemPortNumThe number of the remote port to which this port is connected (1 = network port A, 2 = network port B). Device ID and port number are used as an agent independent port ID. In case of a mismatch between logical and physical configuration the value from the logical configuration is reported.ro INTEGER .1.3.6.1.4.1.2544.1.10.2.1.4.1.8 |
fsp150TopologyRemChassisIndexThe entPhysicalIndex (valid for this agent) of the remote chassis This is meant as a shortcut.ro PhysicalIndex (ENTITY-MIB) .1.3.6.1.4.1.2544.1.10.2.1.4.1.9 |
fsp150TopologyRemPortIndexThe entPhysicalIndex/ifIndex (valid for this agent) of the remote port.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2544.1.10.2.1.4.1.10 |
fsp150TopologyPhysRemChassisTypeThe type of the system to which this port is actually connected. This can be used by the manager to analyse a mismatch between logical and physical configuration.ro Fsp150ChassisType .1.3.6.1.4.1.2544.1.10.2.1.4.1.11 |
fsp150TopologyPhysRemDevIDThe device ID of the system to which this port is actually connected.ro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.2544.1.10.2.1.4.1.12 |
fsp150TopologyPhysRemPortNumThe number of the remote port to which this port is actually connected.ro INTEGER .1.3.6.1.4.1.2544.1.10.2.1.4.1.13 |
fsp150AlarmMIB OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.10.2.2 |
fsp150AlarmFilters OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.10.2.2.1 |
fsp150EquipmentAlarmReportControlTableDisable/enable the generation of traps for alarms/standing conditions (not for transient events) by this entity. While traps are disabled active standing conditions are shown with severity notReported in the fsp150EquipmentCurrentAlarmTable. When traps are re-enabled traps are sent/resent with the configured severity values. SEQUENCE OF Fsp150EquipmentAlarmReportControlEntry .1.3.6.1.4.1.2544.1.10.2.2.1.1 |
fsp150EquipmentAlarmReportControlEntry Fsp150EquipmentAlarmReportControlEntry .1.3.6.1.4.1.2544.1.10.2.2.1.1.1 |
fsp150EquipmentAlarmReportControlStaterw ArcState (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.2.1.1.1.1 |
fsp150InterfaceAlarmReportControlTable SEQUENCE OF Fsp150InterfaceAlarmReportControlEntry .1.3.6.1.4.1.2544.1.10.2.2.1.2 |
fsp150InterfaceAlarmReportControlEntry Fsp150InterfaceAlarmReportControlEntry .1.3.6.1.4.1.2544.1.10.2.2.1.2.1 |
fsp150InterfaceAlarmReportControlStaterw ArcState (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.2.1.2.1.1 |
fsp150AlarmSeverityTableThe severity values with which various standing conditions are reported. Changing a value does not cause any traps to be resent. SEQUENCE OF Fsp150AlarmSeverityEntry .1.3.6.1.4.1.2544.1.10.2.2.1.3 |
fsp150AlarmSeverityEntry Fsp150AlarmSeverityEntry .1.3.6.1.4.1.2544.1.10.2.2.1.3.1 |
fsp150AlarmSeverityType Fsp150AlarmType .1.3.6.1.4.1.2544.1.10.2.2.1.3.1.1 |
fsp150AlarmSeverityValuerw TrapAlarmSeverity (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.2.1.3.1.2 |
fsp150CurrentAlarms OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.10.2.2.2 |
fsp150EquipmentCurrentAlarmTableThe currently active standing conditions (severity other than cleared) for this piece of equipment. SEQUENCE OF Fsp150EquipmentCurrentAlarmEntry .1.3.6.1.4.1.2544.1.10.2.2.2.1 |
fsp150EquipmentCurrentAlarmEntry Fsp150EquipmentCurrentAlarmEntry .1.3.6.1.4.1.2544.1.10.2.2.2.1.1 |
fsp150EquipmentCurrentAlarmType Fsp150AlarmType .1.3.6.1.4.1.2544.1.10.2.2.2.1.1.1 |
fsp150EquipmentCurrentAlarmSeverityro TrapAlarmSeverity (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.2.2.1.1.2 |
fsp150EquipmentCurrentAlarmImpairmentro ServiceImpairment (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.2.2.1.1.3 |
fsp150InterfaceCurrentAlarmTableThe currently active standing conditions (severity other than cleared) for this interface. SEQUENCE OF Fsp150InterfaceCurrentAlarmEntry .1.3.6.1.4.1.2544.1.10.2.2.2.2 |
fsp150InterfaceCurrentAlarmEntry Fsp150InterfaceCurrentAlarmEntry .1.3.6.1.4.1.2544.1.10.2.2.2.2.1 |
fsp150InterfaceCurrentAlarmType Fsp150AlarmType .1.3.6.1.4.1.2544.1.10.2.2.2.2.1.1 |
fsp150InterfaceCurrentAlarmSeverityro TrapAlarmSeverity (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.2.2.2.1.2 |
fsp150InterfaceCurrentAlarmImpairmentro ServiceImpairment (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.2.2.2.1.3 |
fsp150AlarmDelayRaiseDelay in seconds (0 to 10) when raising an alarm.rw INTEGER .1.3.6.1.4.1.2544.1.10.2.2.3 |
fsp150AlarmDelayClearDelay in seconds (0 to 10) when clearing an alarm.rw INTEGER .1.3.6.1.4.1.2544.1.10.2.2.4 |
fsp150ConfigAndStatus OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.10.2.3 |
fsp150ChassisConfigTable SEQUENCE OF Fsp150ChassisConfigEntry .1.3.6.1.4.1.2544.1.10.2.3.1 |
fsp150ChassisConfigEntry Fsp150ChassisConfigEntry .1.3.6.1.4.1.2544.1.10.2.3.1.1 |
fsp150ChassisConfigNetAIndexThe interface index for network port A.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2544.1.10.2.3.1.1.2 |
fsp150ChassisConfigNetBIndexThe interface index for network port B.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2544.1.10.2.3.1.1.3 |
fsp150ChassisConfigProtTypeSelection of the protection mechanism.rw Fsp150ProtectionType .1.3.6.1.4.1.2544.1.10.2.3.1.1.4 |
fsp150ChassisConfigUserString1A string associated with the chassis configurable by the manager. The same string is reported as entPhysicalAlias.rw DisplayString .1.3.6.1.4.1.2544.1.10.2.3.1.1.5 |
fsp150ChassisConfigUserString2A string associated with the chassis configurable by the manager.rw DisplayString .1.3.6.1.4.1.2544.1.10.2.3.1.1.6 |
fsp150ChassisConfigUserString3A string associated with the chassis configurable by the manager.rw DisplayString .1.3.6.1.4.1.2544.1.10.2.3.1.1.7 |
fsp150ChassisConfigLowVoltageThresholdThe rail voltage in mV below which an fsp150VoltageTooLow alarm is raised.rw INTEGER .1.3.6.1.4.1.2544.1.10.2.3.1.1.8 |
fsp150ChassisConfigHighVoltageThresholdThe rail voltage in mV above which an fsp150VoltageTooHigh alarm is raised.rw INTEGER .1.3.6.1.4.1.2544.1.10.2.3.1.1.9 |
fsp150ChassisConfigHighTempThresholdThe chassis temperature in degrees Celsius above which an fsp150TempTooHigh alarm is raised.rw INTEGER (-32768..32767) .1.3.6.1.4.1.2544.1.10.2.3.1.1.10 |
fsp150ChassisConfigForwardHSRPFor layer 3 protection.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.10.2.3.1.1.11 |
fsp150ChassisConfigForwardVRRPFor layer 3 protection.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.10.2.3.1.1.12 |
fsp150ChassisConfigBPDUInflationrw INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.2544.1.10.2.3.1.1.13 |
fsp150ChassisConfigIngressDepartureConfigrw Fsp150IngressDepartureConfig .1.3.6.1.4.1.2544.1.10.2.3.1.1.14 |
fsp150ChassisConfigEgressArrivalConfigrw Fsp150EgressArrivalConfig .1.3.6.1.4.1.2544.1.10.2.3.1.1.15 |
fsp150ChassisConfigLinkLossFwdUnit link loss forwardingrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.10.2.3.1.1.16 |
fsp150ChassisConfigPointToPointModeUnit point to point moderw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.10.2.3.1.1.17 |
fsp150ChassisConfigTagProtocolIdUnit VLAN Tag Protocol ID (TPID)rw INTEGER .1.3.6.1.4.1.2544.1.10.2.3.1.1.18 |
fsp150ChassisConfigTrafficMgmtClassificationUnit traffic management classification. If enabled, CIR and CBS values are possible to configure for all access portsrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.10.2.3.1.1.19 |
fsp150ChassisConfigJumboFrameUnit jumbo framerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.10.2.3.1.1.20 |
fsp150ChassisConfigTandemModeUnit tandem moderw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.10.2.3.1.1.21 |
fsp150ChassisConfigRingIdRing ID number, used for identifying this node when the node is a member of a ring.rw INTEGER .1.3.6.1.4.1.2544.1.10.2.3.1.1.22 |
fsp150ChassisConfigPauseEnablerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.10.2.3.1.1.23 |
fsp150ChassisConfigBpduFilterrw Fsp150AddressFilter .1.3.6.1.4.1.2544.1.10.2.3.1.1.24 |
fsp150ChassisConfigTmSuppUnit supports traffic management (and fsp150TrafficManagementMIB)ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.10.2.3.1.1.25 |
fsp150ChassisConfigPreferredNetSelection of the preferred network protection port (Mx only).rw Fsp150PreferredNetwork .1.3.6.1.4.1.2544.1.10.2.3.1.1.26 |
fsp150ChassisConfigSwSyncRequestSynchronise software. Writing a non-zero value initiates an update of the microcontroller firmware of this chassis to the version that is running on the local chassis. neSwUpgradeState in the ADVA-MIB reflects the status of the process. Read always returns 0.rw INTEGER (-32768..32767) .1.3.6.1.4.1.2544.1.10.2.3.1.1.27 |
fsp150ChassisConfigMACAddressLearningMAC Address Learningrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.10.2.3.1.1.28 |
fsp150ChassisConfigUnitEgressMulticastCIRMG onlyrw Unsigned32 .1.3.6.1.4.1.2544.1.10.2.3.1.1.29 |
fsp150ChassisConfigUnitEgressMulticastCBSrw Unsigned32 .1.3.6.1.4.1.2544.1.10.2.3.1.1.30 |
fsp150ChassisConfigMulticastProtTypeSelection of the multicast protection mechanism (MG only).rw Fsp150MulticastProtectionType .1.3.6.1.4.1.2544.1.10.2.3.1.1.31 |
fsp150ChassisStatusTableOnly chassis that are physically present and connected to the local system have entries in this table. SEQUENCE OF Fsp150ChassisStatusEntry .1.3.6.1.4.1.2544.1.10.2.3.2 |
fsp150ChassisStatusEntry Fsp150ChassisStatusEntry .1.3.6.1.4.1.2544.1.10.2.3.2.1 |
fsp150ChassisStatusProtStateThe protection mechanism currently used. In case the configured protection type is automatic this variable gives the currently selected type. Otherwise both types should agree.ro Fsp150ProtectionType .1.3.6.1.4.1.2544.1.10.2.3.2.1.1 |
fsp150ChassisStatusTemperatureThe current chassis temperature in degrees Celsius.ro INTEGER (-32768..32767) .1.3.6.1.4.1.2544.1.10.2.3.2.1.2 |
fsp150ChassisStatusRailVoltageThe current rail voltage in mV.ro INTEGER .1.3.6.1.4.1.2544.1.10.2.3.2.1.3 |
fsp150ChassisStatusNEMIModeIndicates whether a management module is fitted and whether it is controlling its system.ro Fsp150NEMIModeType .1.3.6.1.4.1.2544.1.10.2.3.2.1.4 |
fsp150ChassisStatusActiveNetworkThe network port(s) from which the system is currently receiving (0 = both, 1 = network port A, 2 = network port B, 3 = none/fault). Depending on the protection mechanism used, the system is transmitting on the same or on both ports.ro INTEGER .1.3.6.1.4.1.2544.1.10.2.3.2.1.5 |
fsp150ChassisStatusBootTimerAproximate time in seconds since the unit was powered on or resetted. Note that this counter may increment in jumps, depending on the resolution of the internal clock.ro Unsigned32 .1.3.6.1.4.1.2544.1.10.2.3.2.1.6 |
fsp150ChassisStatusIngressDepartureStatusro Fsp150IngressDepartureStatus .1.3.6.1.4.1.2544.1.10.2.3.2.1.7 |
fsp150ChassisStatusEgressArrivalStatusro Fsp150EgressArrivalStatus .1.3.6.1.4.1.2544.1.10.2.3.2.1.8 |
fsp150ChassisStatusPreferredNetThe configured preferred network protection port. (Mx only)ro Fsp150PreferredNetwork .1.3.6.1.4.1.2544.1.10.2.3.2.1.9 |
fsp150ChassisStatusMulticastActiveNetworkThe network port(s) from which the system is currently receiving multicast data (0 = none/fault, 1 = network port A, 2 = network port B, 3 = both).ro INTEGER .1.3.6.1.4.1.2544.1.10.2.3.2.1.10 |
fsp150IfConfigTable SEQUENCE OF Fsp150IfConfigEntry .1.3.6.1.4.1.2544.1.10.2.3.3 |
fsp150IfConfigEntry Fsp150IfConfigEntry .1.3.6.1.4.1.2544.1.10.2.3.3.1 |
fsp150IfConfigUserStringA string associated with the interface configurable by the manager. The same string is reported as entPhysicalAlias.rw DisplayString .1.3.6.1.4.1.2544.1.10.2.3.3.1.1 |
fsp150IfConfigLinkLossFwdOnly supported for access interfaces. If true the link will be brought down when the network side is down, so connected Ethernet equipment can detect the fault.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.10.2.3.3.1.2 |
fsp150IfConfigAutoNegEnable auto negotiation.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.10.2.3.3.1.3 |
fsp150IfConfigDataRateThe configured data rate in Mbits/sec (10 | 100 | 1000) or 0 to select the highest rate supported by an SFP. This setting is only effective when auto negotiation is disabled.rw INTEGER .1.3.6.1.4.1.2544.1.10.2.3.3.1.4 |
fsp150IfConfigAdminStatusThe admin status (1 = up, 2 = down, 3 = testing, 4 = forced linkdown).rw Fsp150AdminStatusType .1.3.6.1.4.1.2544.1.10.2.3.3.1.5 |
fsp150IfConfigRingControllerTrue if ring controller is started for this port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.10.2.3.3.1.6 |
fsp150IfConfigDasaSwappingEnable CP'S dasaswaprw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.10.2.3.3.1.7 |
fsp150IfConfigTerminalLoopbackEnable CP'S terminalloopbackrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.10.2.3.3.1.8 |
fsp150IfTableOnly interfaces that are physically present and connected to the local system have entries in this table. SEQUENCE OF Fsp150IfEntry .1.3.6.1.4.1.2544.1.10.2.3.4 |
fsp150IfEntry Fsp150IfEntry .1.3.6.1.4.1.2544.1.10.2.3.4.1 |
fsp150IfConnectorTypeThe type of the connector, e.g. 'SC', 'FC', 'MU'.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2544.1.10.2.3.4.1.1 |
fsp150IfLinkLossFwdActiveIs the link down due to link loss forwarding?ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.10.2.3.4.1.2 |
fsp150IfDataRateThe current data rate in Mbits/sec.ro INTEGER .1.3.6.1.4.1.2544.1.10.2.3.4.1.3 |
fsp150OpticalIfConfigTable SEQUENCE OF Fsp150OpticalIfConfigEntry .1.3.6.1.4.1.2544.1.10.2.3.5 |
fsp150OpticalIfConfigEntry Fsp150OpticalIfConfigEntry .1.3.6.1.4.1.2544.1.10.2.3.5.1 |
fsp150OpticalIfConfigLowOIPThresholdThe optical input power level in dBm below which an fsp150LowOIP alarm is raised. Only available for network interfaces. In this version this value cannot be changed. Writing to it will fail.rw INTEGER (-32768..32767) .1.3.6.1.4.1.2544.1.10.2.3.5.1.1 |
fsp150OpticalIfTable SEQUENCE OF Fsp150OpticalIfEntry .1.3.6.1.4.1.2544.1.10.2.3.6 |
fsp150OpticalIfEntry Fsp150OpticalIfEntry .1.3.6.1.4.1.2544.1.10.2.3.6.1 |
fsp150OpticalIfLinkLength9umThe maximum link length in 100 metres supported for 9/125 micrometre fibre.ro INTEGER .1.3.6.1.4.1.2544.1.10.2.3.6.1.1 |
fsp150OpticalIfLinkLength50umThe maximum link length in metres supported for 50/125 micrometre fibre.ro INTEGER .1.3.6.1.4.1.2544.1.10.2.3.6.1.2 |
fsp150OpticalIfLinkLength62d5umThe maximum link length in metres supported for 62.5/125 micrometre fibre.ro INTEGER .1.3.6.1.4.1.2544.1.10.2.3.6.1.3 |
fsp150OpticalIfLinkLengthCopperThe maximum link length in metres supported for copper.ro INTEGER .1.3.6.1.4.1.2544.1.10.2.3.6.1.4 |
fsp150OpticalIfWavelengthThe nominal wavelength in nm.ro INTEGER .1.3.6.1.4.1.2544.1.10.2.3.6.1.5 |
fsp150OpticalIfStatusTable SEQUENCE OF Fsp150OpticalIfStatusEntry .1.3.6.1.4.1.2544.1.10.2.3.7 |
fsp150OpticalIfStatusEntry Fsp150OpticalIfStatusEntry .1.3.6.1.4.1.2544.1.10.2.3.7.1 |
fsp150OpticalIfStatusLaserBiasThe current laser bias in micro Amps.ro INTEGER (-32768..32767) .1.3.6.1.4.1.2544.1.10.2.3.7.1.1 |
fsp150OpticalIfStatusTxPowerThe current transmit power in dBm.ro INTEGER (-32768..32767) .1.3.6.1.4.1.2544.1.10.2.3.7.1.2 |
fsp150OpticalIfStatusRxPowerThe current receive power in dBm.ro INTEGER (-32768..32767) .1.3.6.1.4.1.2544.1.10.2.3.7.1.3 |
fsp150OpticalIfStatusLaserTempThe current laser temperature in degrees Celsius.ro INTEGER (-32768..32767) .1.3.6.1.4.1.2544.1.10.2.3.7.1.4 |
fsp150ElectricalIfConfigTable SEQUENCE OF Fsp150ElectricalIfConfigEntry .1.3.6.1.4.1.2544.1.10.2.3.8 |
fsp150ElectricalIfConfigEntry Fsp150ElectricalIfConfigEntry .1.3.6.1.4.1.2544.1.10.2.3.8.1 |
fsp150ElectricalIfConfigFullDuplexFull duplex mode enabled? Only writable when auto negotiation is disabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.10.2.3.8.1.1 |
fsp150IfAutoNegConfigTableThis table has entries for electrical interfaces only. SEQUENCE OF Fsp150IfAutoNegConfigEntry .1.3.6.1.4.1.2544.1.10.2.3.9 |
fsp150IfAutoNegConfigEntry Fsp150IfAutoNegConfigEntry .1.3.6.1.4.1.2544.1.10.2.3.9.1 |
fsp150IfAutoNegConfigAdvertisedTechnologyAbilityThe advertised ability of the local device.rw Fsp150TechnologyAbility .1.3.6.1.4.1.2544.1.10.2.3.9.1.1 |
fsp150IfAutoNegStatusTableThis table has entries for electrical interfaces only. SEQUENCE OF Fsp150IfAutoNegStatusEntry .1.3.6.1.4.1.2544.1.10.2.3.10 |
fsp150IfAutoNegStatusEntry Fsp150IfAutoNegStatusEntry .1.3.6.1.4.1.2544.1.10.2.3.10.1 |
fsp150IfAutoNegStatusRemSignallingDetectedIndicates whether signalling from the remote device has been detected.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.10.2.3.10.1.1 |
fsp150IfAutoNegStatusStatusThe status of the auto negotiation process.ro Fsp150AutoNegStatus .1.3.6.1.4.1.2544.1.10.2.3.10.1.2 |
fsp150IfAutoNegStatusLocalTechnologyAbilityThe ability of the local device.ro Fsp150TechnologyAbility .1.3.6.1.4.1.2544.1.10.2.3.10.1.3 |
fsp150IfAutoNegStatusReceivedTechnologyAbilityThe received ability of the remote device.ro Fsp150TechnologyAbility .1.3.6.1.4.1.2544.1.10.2.3.10.1.4 |
fsp150FanTable SEQUENCE OF Fsp150FanEntry .1.3.6.1.4.1.2544.1.10.2.3.11 |
fsp150FanEntry Fsp150FanEntry .1.3.6.1.4.1.2544.1.10.2.3.11.1 |
fsp150FanStatusStatus of the fanro Fsp150FanStatus .1.3.6.1.4.1.2544.1.10.2.3.11.1.1 |
fsp150PSUTable SEQUENCE OF Fsp150PSUEntry .1.3.6.1.4.1.2544.1.10.2.3.12 |
fsp150PSUEntry Fsp150PSUEntry .1.3.6.1.4.1.2544.1.10.2.3.12.1 |
fsp150PSUTypeThe type of PSU fitted, 'AC' or 'DC'.ro SnmpAdminString (SNMP-FRAMEWORK-MIB) .1.3.6.1.4.1.2544.1.10.2.3.12.1.1 |
fsp150PSUStatusOperational status of the PSUro Fsp150PSUStatus .1.3.6.1.4.1.2544.1.10.2.3.12.1.2 |
fsp150PSUVoltageVoltage output from PSU, in millivolts, or -1 if measurement not possible.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.2544.1.10.2.3.12.1.3 |
fsp150IfOAMConfigTable SEQUENCE OF Fsp150IfOAMConfigEntry .1.3.6.1.4.1.2544.1.10.2.3.13 |
fsp150IfOAMConfigEntry Fsp150IfOAMConfigEntry .1.3.6.1.4.1.2544.1.10.2.3.13.1 |
fsp150IfOAMConfigOAMEnableEnable OAM for this interface. If disabled the interface acts as if the OAM sublayer were absent, except that re-enabling OAM via OAM is possible.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.10.2.3.13.1.1 |
fsp150IfOAMConfigLoopbackCommandActivate/deactivate a loopback on this interface. Available on network and access ports. The value read back is always noLoopback. Loopback configuration is not stored in the database. Loopbacks will be reset when a chassis is disconnected or the NEMI reboots.rw Fsp150OAMLoopbackCommandType .1.3.6.1.4.1.2544.1.10.2.3.13.1.2 |
fsp150IfOAMConfigLoopbackStatusThe loopback status of the interface. A loopback at the connected remote interface is also reported on the local interface.ro Fsp150OAMLoopbackStatusType .1.3.6.1.4.1.2544.1.10.2.3.13.1.3 |
fsp150IfOAMConfigOAMActiveInitiate OAM discoveryro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.10.2.3.13.1.4 |
fsp150IfOAMConfigOAMInfoEnableOAM Info discovery on/offro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.10.2.3.13.1.5 |
fsp150IfOAMConfigLoopbacktimerThis object allows specification of timer value in seconds for timed local loopbacks. Timed local loopbacks are automatically removed at the expiration of specified time. The default timer (0,...300s).rw INTEGER .1.3.6.1.4.1.2544.1.10.2.3.13.1.6 |
fsp150IfOAMConfigTestTrafficEnableAllow traffic generator when setting the remote loopback moderw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.10.2.3.13.1.7 |
fsp150IfOAMConfigResetCountersAllow reset the OAM performance countersrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.10.2.3.13.1.8 |
fsp150IfOAMConfigDaSaSwappingAllow swapping destination MAC address and source MAC address when setting the local loopback on network port or terminal loopback on Access portrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.10.2.3.13.1.9 |
fsp150AccessIfConfigTable SEQUENCE OF Fsp150AccessIfConfigEntry .1.3.6.1.4.1.2544.1.10.2.3.14 |
fsp150AccessIfConfigEntry Fsp150AccessIfConfigEntry .1.3.6.1.4.1.2544.1.10.2.3.14.1 |
fsp150AccessIfConfigForwardModeControls how ingress traffic is forwarded.rw Fsp150AccessPortForwardMode .1.3.6.1.4.1.2544.1.10.2.3.14.1.1 |
fsp150AccessIfConfigTagModeControls tag processing mode on a port.rw Fsp150AccessPortTagMode .1.3.6.1.4.1.2544.1.10.2.3.14.1.2 |
fsp150AccessIfConfigEgressCirLowControls the maximum Commited Information Rate (CIR) for low priority egress traffic on this port. Value -1 means not supportedrw INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.2544.1.10.2.3.14.1.3 |
fsp150AccessIfConfigEgressCbsLowControls the maximum Commited Burst Size (CBS) for low priority egress traffic on this port. Value -1 means not supportedrw INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.2544.1.10.2.3.14.1.4 |
fsp150AccessIfConfigEgressCirMedControls the maximum Commited Information Rate (CIR) for medium priority egress traffic on this port. Value -1 means not supportedrw INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.2544.1.10.2.3.14.1.5 |
fsp150AccessIfConfigEgressCbsMedControls the maximum Commited Burst Size (CBS) for medium priority egress traffic on this port. Value -1 means not supportedrw INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.2544.1.10.2.3.14.1.6 |
fsp150AccessIfConfigEgressCirHighControls the maximum Commited Information Rate (CIR) for high priority egress traffic on this port. Value -1 means not supportedrw INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.2544.1.10.2.3.14.1.7 |
fsp150AccessIfConfigEgressCbsHighControls the maximum Commited Burst Size (CBS) for high priority egress traffic on this port. Value -1 means not supportedrw INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.2544.1.10.2.3.14.1.8 |
fsp150AccessIfConfigIngressCirLowControls the maximum Commited Information Rate (CIR) for low priority ingress traffic on this port. Value -1 means not supportedrw INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.2544.1.10.2.3.14.1.9 |
fsp150AccessIfConfigIngressCbsLowControls the maximum Commited Burst Size (CBS) for low priority ingress traffic on this port. Value -1 means not supportedrw INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.2544.1.10.2.3.14.1.10 |
fsp150AccessIfConfigIngressCirMedControls the maximum Commited Information Rate (CIR) for medium priority ingress traffic on this port. Value -1 means not supportedrw INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.2544.1.10.2.3.14.1.11 |
fsp150AccessIfConfigIngressCbsMedControls the maximum Commited Burst Size (CBS) for medium priority ingress traffic on this port. Value -1 means not supportedrw INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.2544.1.10.2.3.14.1.12 |
fsp150AccessIfConfigIngressCirHighControls the maximum Commited Information Rate (CIR) for high priority ingress traffic on this port. Value -1 means not supportedrw INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.2544.1.10.2.3.14.1.13 |
fsp150AccessIfConfigIngressCbsHighControls the maximum Commited Burst Size (CBS) for high priority ingress traffic on this port. Value -1 means not supportedrw INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.2544.1.10.2.3.14.1.14 |
fsp150AccessIfConfigPriorityTypeSets the priority classification mode for this port. In mode off, all traffic is classified as low priority. In mode force, the priority is always set to the value set with fsp150AccessIfPriorityValue. In mode copy, the priority is copied as is, unless the packet doesn't have a VLAN tag, in which case the value in fsp150AccessIfPriorityValue is used.rw Fsp150PriorityType .1.3.6.1.4.1.2544.1.10.2.3.14.1.15 |
fsp150AccessIfConfigPriorityValueSets the priority used when fsp150AccessIfPriorityType is in copy or force mode.rw INTEGER .1.3.6.1.4.1.2544.1.10.2.3.14.1.16 |
fsp150AccessIfStatusTable SEQUENCE OF Fsp150AccessIfStatusEntry .1.3.6.1.4.1.2544.1.10.2.3.15 |
fsp150AccessIfStatusEntry Fsp150AccessIfStatusEntry .1.3.6.1.4.1.2544.1.10.2.3.15.1 |
fsp150AccessIfStatusForwardModero Fsp150AccessPortForwardMode .1.3.6.1.4.1.2544.1.10.2.3.15.1.1 |
fsp150AccessIfStatusEgressRegulatorOverflowLowCounts the number of times a packet had to be dropped because the regulator overflowed.ro Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.3.15.1.2 |
fsp150AccessIfStatusEgressRegulatorOverflowMedCounts the number of times a packet had to be dropped because the regulator overflowed.ro Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.3.15.1.3 |
fsp150AccessIfStatusEgressRegulatorOverflowHighCounts the number of times a packet had to be dropped because the regulator overflowed.ro Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.3.15.1.4 |
fsp150AccessIfStatusIngressRegulatorOverflowLowCounts the number of times a packet had to be dropped because the regulator overflowed.ro Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.3.15.1.5 |
fsp150AccessIfStatusIngressRegulatorOverflowMedCounts the number of times a packet had to be dropped because the regulator overflowed.ro Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.3.15.1.6 |
fsp150AccessIfStatusIngressRegulatorOverflowHighCounts the number of times a packet had to be dropped because the regulator overflowed.ro Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.3.15.1.7 |
fsp150IfCapsTable SEQUENCE OF Fsp150IfCapsEntry .1.3.6.1.4.1.2544.1.10.2.3.16 |
fsp150IfCapsEntry Fsp150IfCapsEntry .1.3.6.1.4.1.2544.1.10.2.3.16.1 |
fsp150IfCapsSuppRatesro Fsp150DataRates .1.3.6.1.4.1.2544.1.10.2.3.16.1.1 |
fsp150IfCapsSuppTxModesro Fsp150TxModes .1.3.6.1.4.1.2544.1.10.2.3.16.1.2 |
fsp150IfCapsSuppAutoNegro Fsp150AutoNegSupp .1.3.6.1.4.1.2544.1.10.2.3.16.1.3 |
fsp150NetworkIfConfigTable SEQUENCE OF Fsp150NetworkIfConfigEntry .1.3.6.1.4.1.2544.1.10.2.3.17 |
fsp150NetworkIfConfigEntry Fsp150NetworkIfConfigEntry .1.3.6.1.4.1.2544.1.10.2.3.17.1 |
fsp150NetworkIfConfigTransmitAcControls the maximum Allocated Capacity (AC) on the network ports. Primarily used when the node is used in ring mode. Value -1 means not supportedrw INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.2544.1.10.2.3.17.1.1 |
fsp150NetworkIfConfigTransmitAbsControls the maximum Allocated Burst Size (ABS) on the network ports. Primarily used when the node is used in ring mode. Value -1 means not supportedrw INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.2544.1.10.2.3.17.1.2 |
fsp150NetworkIfConfigTranslationControls the PID translation on the network ports.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.10.2.3.17.1.3 |
fsp150TrafficManagementMIB OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.10.2.3.18 |
fsp150TMBaseTableThe VID translation function of a given traffic management port in a given chassis. Only non-identical translations are in this table. Associate a meter with a traffic class. More than one traffic class can be metered by the same meter. The shaping parameters for a queue associated with a given output port in a given chassis (queue index non-zero) or for the port itself (queue index 0). The configuration of the frame modification function. SEQUENCE OF Fsp150TMBaseEntry .1.3.6.1.4.1.2544.1.10.2.3.18.1 |
fsp150TMBaseEntry Fsp150TMBaseEntry .1.3.6.1.4.1.2544.1.10.2.3.18.1.1 |
fsp150TMBaseMaxClassRulesThe maximum number of classification rules.ro INTEGER .1.3.6.1.4.1.2544.1.10.2.3.18.1.1.1 |
fsp150TMBaseMaxClassesThe maximum number of traffic classes.ro INTEGER .1.3.6.1.4.1.2544.1.10.2.3.18.1.1.2 |
fsp150TMBaseMaxMetersThe maximum number of meters.ro INTEGER .1.3.6.1.4.1.2544.1.10.2.3.18.1.1.3 |
fsp150TMBaseMaxQueuesThe maximum number of queues per port.ro INTEGER .1.3.6.1.4.1.2544.1.10.2.3.18.1.1.4 |
fsp150TMBaseLastChangeTimeLast change time stamp for traffic management settings for a given chassis.ro TimeStamp (SNMPv2-TC) .1.3.6.1.4.1.2544.1.10.2.3.18.1.1.5 |
fsp150TMPortTable SEQUENCE OF Fsp150TMPortEntry .1.3.6.1.4.1.2544.1.10.2.3.18.2 |
fsp150TMPortEntry Fsp150TMPortEntry .1.3.6.1.4.1.2544.1.10.2.3.18.2.1 |
fsp150TMPortPortNoThe traffic management port number for a given ifIndex. Note that the same number can be used by more than one interface; the two access ports on an FSP 150CP share one traffic management port.ro Fsp150TMPort .1.3.6.1.4.1.2544.1.10.2.3.18.2.1.1 |
fsp150TMPortConfigTable SEQUENCE OF Fsp150TMPortConfigEntry .1.3.6.1.4.1.2544.1.10.2.3.18.3 |
fsp150TMPortConfigEntry Fsp150TMPortConfigEntry .1.3.6.1.4.1.2544.1.10.2.3.18.3.1 |
fsp150TMPortConfigPortNo Fsp150TMPort .1.3.6.1.4.1.2544.1.10.2.3.18.3.1.1 |
fsp150TMPortConfigPVIDThe default VID of a port (0,...4094).rw Fsp150VID .1.3.6.1.4.1.2544.1.10.2.3.18.3.1.2 |
fsp150TMPortConfigPVIDctrlThe VLAN classification configuration of a port.rw Fsp150VIDctrl .1.3.6.1.4.1.2544.1.10.2.3.18.3.1.3 |
fsp150TMPortConfigTPIDThe tag protocol identity configuration of a port (0x0600 - 0xffff).rw INTEGER .1.3.6.1.4.1.2544.1.10.2.3.18.3.1.4 |
fsp150TMPortConfigVLANfilterThe VLAN filtering configuration of a port.rw Fsp150VLANfilter .1.3.6.1.4.1.2544.1.10.2.3.18.3.1.5 |
fsp150VIDtranslationTableThe VID translation function of a given traffic management port in a given chassis. Only non-identical translations are in this table. SEQUENCE OF Fsp150VIDtranslationEntry .1.3.6.1.4.1.2544.1.10.2.3.18.4 |
fsp150VIDtranslationEntry Fsp150VIDtranslationEntry .1.3.6.1.4.1.2544.1.10.2.3.18.4.1 |
fsp150VIDtranslationPortNo Fsp150TMPort .1.3.6.1.4.1.2544.1.10.2.3.18.4.1.1 |
fsp150VIDtranslationInternal Fsp150VID .1.3.6.1.4.1.2544.1.10.2.3.18.4.1.2 |
fsp150VIDtranslationExternalrw Fsp150VID .1.3.6.1.4.1.2544.1.10.2.3.18.4.1.3 |
fsp150VIDtranslationRowStatusWriting destroy(6) deletes the entry. Entries can be created by just setting the external VID. If row status is set as well it should be set to createAndGo(4). Read will always return active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.10.2.3.18.4.1.4 |
fsp150FilteringTable SEQUENCE OF Fsp150FilteringEntry .1.3.6.1.4.1.2544.1.10.2.3.18.5 |
fsp150FilteringEntry Fsp150FilteringEntry .1.3.6.1.4.1.2544.1.10.2.3.18.5.1 |
fsp150FilteringVlanId Fsp150VID .1.3.6.1.4.1.2544.1.10.2.3.18.5.1.1 |
fsp150FilteringMembersThe ports that are members of the VLAN. Entries without members are discarded.rw Fsp150TMPortMap .1.3.6.1.4.1.2544.1.10.2.3.18.5.1.3 |
fsp150FilteringTrunkModeThe ports for which trunk mode is enabled. Trunk mode can only be enabled for VLAN members.rw Fsp150TMPortMap .1.3.6.1.4.1.2544.1.10.2.3.18.5.1.4 |
fsp150FilteringRowStatusWriting destroy(6) or setting the member field to zero deletes the entry. Entries can be created by setting the member field to non-zero. If row status is set as well it should be set to createAndGo(4). Read will always return active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.10.2.3.18.5.1.5 |
fsp150ClassificationTable SEQUENCE OF Fsp150ClassificationEntry .1.3.6.1.4.1.2544.1.10.2.3.18.6 |
fsp150ClassificationEntry Fsp150ClassificationEntry .1.3.6.1.4.1.2544.1.10.2.3.18.6.1 |
fsp150ClassificationPriority INTEGER .1.3.6.1.4.1.2544.1.10.2.3.18.6.1.1 |
fsp150ClassificationArrivalPortMaskThe incoming ports for which this rule is applicable.rw Fsp150TMPortMap .1.3.6.1.4.1.2544.1.10.2.3.18.6.1.2 |
fsp150ClassificationInVIDThe VLAN ID of the incoming frame, 0 for a value of 0 or none, 4095 for any.rw Fsp150VID .1.3.6.1.4.1.2544.1.10.2.3.18.6.1.3 |
fsp150ClassificationInPCPThe PCP (0,... 7) of the incoming frame or 8 for any.rw INTEGER .1.3.6.1.4.1.2544.1.10.2.3.18.6.1.4 |
fsp150ClassificationInDEThe DE (0, 1) of the incoming frame or 2 for any.rw INTEGER .1.3.6.1.4.1.2544.1.10.2.3.18.6.1.5 |
fsp150ClassificationInDSCPThe DSCP (0,... 63) of the incoming frame or 64 for any.rw INTEGER .1.3.6.1.4.1.2544.1.10.2.3.18.6.1.6 |
fsp150ClassificationOutTrafficClassThe traffic class to which the frame is assigned. The first rule (i.e. the one with the lowest priority value) that matches a frame determines its traffic class and colour.rw Fsp150TrafficClassIndex .1.3.6.1.4.1.2544.1.10.2.3.18.6.1.7 |
fsp150ClassificationOutColourrw Fsp150TMColour .1.3.6.1.4.1.2544.1.10.2.3.18.6.1.8 |
fsp150ClassificationRowStatusWriting destroy(6) deletes the entry. Rules with priority values greater than the one of the deleted entry are moved up in the table, i.e. their priority values are decremented. Writing createAndGo(4) together with all other columns creates a new entry, i.e. inserts an entry with the given priority. Existing entries with priority values greater than or equal to the priority of the new entry are moved down in the table, i.e. their priority values are incremented. The maximum priority value (i.e. the lowest priority) for a new entry is the highest existing priority value plus one. Read will always return active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.10.2.3.18.6.1.9 |
fsp150ClassificationStatisticsTable SEQUENCE OF Fsp150ClassificationStatisticsEntry .1.3.6.1.4.1.2544.1.10.2.3.18.7 |
fsp150ClassificationStatisticsEntry Fsp150ClassificationStatisticsEntry .1.3.6.1.4.1.2544.1.10.2.3.18.7.1 |
fsp150ClassificationStatisticsPriority INTEGER .1.3.6.1.4.1.2544.1.10.2.3.18.7.1.1 |
fsp150ClassificationStatisticsClassifiedThe number of frames classified by this rule.ro Counter32 .1.3.6.1.4.1.2544.1.10.2.3.18.7.1.2 |
fsp150MeterAllocationTableAssociate a meter with a traffic class. More than one traffic class can be metered by the same meter. SEQUENCE OF Fsp150MeterAllocationEntry .1.3.6.1.4.1.2544.1.10.2.3.18.8 |
fsp150MeterAllocationEntry Fsp150MeterAllocationEntry .1.3.6.1.4.1.2544.1.10.2.3.18.8.1 |
fsp150MeterAllocationTrafficClass Fsp150TrafficClassIndex .1.3.6.1.4.1.2544.1.10.2.3.18.8.1.1 |
fsp150MeterAllocationMeterIndexrw INTEGER .1.3.6.1.4.1.2544.1.10.2.3.18.8.1.2 |
fsp150MeterAllocationRowStatusWriting destroy(6) deletes the entry. Deleting the last entry with a given meter index deletes the corresponding entry in the meter table as well. Entries can be created by setting meter index. If row status is set as well it should be set to createAndGo(4). Assigning a meter index for the first time creates the corresponding entry in the meter table. Read will always return active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.10.2.3.18.8.1.3 |
fsp150MeterTable SEQUENCE OF Fsp150MeterEntry .1.3.6.1.4.1.2544.1.10.2.3.18.9 |
fsp150MeterEntry Fsp150MeterEntry .1.3.6.1.4.1.2544.1.10.2.3.18.9.1 |
fsp150MeterMeterIndex INTEGER .1.3.6.1.4.1.2544.1.10.2.3.18.9.1.1 |
fsp150MeterCIRCommitted information rate in Kbits/sec.rw Unsigned32 .1.3.6.1.4.1.2544.1.10.2.3.18.9.1.2 |
fsp150MeterCBSCommitted burst size in Kbytes.rw Unsigned32 .1.3.6.1.4.1.2544.1.10.2.3.18.9.1.3 |
fsp150MeterEIRExcess information rate in Kbits/sec.rw Unsigned32 .1.3.6.1.4.1.2544.1.10.2.3.18.9.1.4 |
fsp150MeterEBSExcess burst size in Kbytes.rw Unsigned32 .1.3.6.1.4.1.2544.1.10.2.3.18.9.1.5 |
fsp150MeterCMColour mode.rw Fsp150ColourMode .1.3.6.1.4.1.2544.1.10.2.3.18.9.1.6 |
fsp150MeterCFCoupling flag.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.10.2.3.18.9.1.7 |
fsp150MeterStatisticsTable SEQUENCE OF Fsp150MeterStatisticsEntry .1.3.6.1.4.1.2544.1.10.2.3.18.10 |
fsp150MeterStatisticsEntry Fsp150MeterStatisticsEntry .1.3.6.1.4.1.2544.1.10.2.3.18.10.1 |
fsp150MeterStatisticsMeterIndex INTEGER .1.3.6.1.4.1.2544.1.10.2.3.18.10.1.1 |
fsp150MeterStatisticsUnchangedNumber of frames passed unchanged by this meter.ro Counter32 .1.3.6.1.4.1.2544.1.10.2.3.18.10.1.2 |
fsp150MeterStatisticsReMarkedNumber of frames passed and re-marked as yellow by this meter.ro Counter32 .1.3.6.1.4.1.2544.1.10.2.3.18.10.1.3 |
fsp150MeterStatisticsDroppedNumber of frames dropped by this meter.ro Counter32 .1.3.6.1.4.1.2544.1.10.2.3.18.10.1.4 |
fsp150QueueMappingTable SEQUENCE OF Fsp150QueueMappingEntry .1.3.6.1.4.1.2544.1.10.2.3.18.11 |
fsp150QueueMappingEntryConfigure the shaping queue (if any) to be used for a given traffic class and outgoing port number in a given chassis. Fsp150QueueMappingEntry .1.3.6.1.4.1.2544.1.10.2.3.18.11.1 |
fsp150QueueMappingPortNo Fsp150TMPort .1.3.6.1.4.1.2544.1.10.2.3.18.11.1.1 |
fsp150QueueMappingTrafficClass Fsp150TrafficClassIndex .1.3.6.1.4.1.2544.1.10.2.3.18.11.1.2 |
fsp150QueueMappingOutQueueIndexrw INTEGER .1.3.6.1.4.1.2544.1.10.2.3.18.11.1.3 |
fsp150QueueMappingRowStatusWriting destroy(6) deletes the entry. Entries can be created by just setting queue index. If row status is set as well, it should be set to createAndGo(4). Read will always return active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.10.2.3.18.11.1.4 |
fsp150ShaperTableThe shaping parameters for a queue associated with a given output port in a given chassis (queue index non-zero) or for the port itself (queue index 0). SEQUENCE OF Fsp150ShaperEntry .1.3.6.1.4.1.2544.1.10.2.3.18.12 |
fsp150ShaperEntry Fsp150ShaperEntry .1.3.6.1.4.1.2544.1.10.2.3.18.12.1 |
fsp150ShaperPortNo Fsp150TMPort .1.3.6.1.4.1.2544.1.10.2.3.18.12.1.1 |
fsp150ShaperQueueIndex INTEGER .1.3.6.1.4.1.2544.1.10.2.3.18.12.1.2 |
fsp150ShaperACThe allocated capacity in Kbits/sec.rw Unsigned32 .1.3.6.1.4.1.2544.1.10.2.3.18.12.1.3 |
fsp150ShaperABSThe allocated burst size in Kbytes.rw Unsigned32 .1.3.6.1.4.1.2544.1.10.2.3.18.12.1.4 |
fsp150FrameModificationTableThe configuration of the frame modification function. SEQUENCE OF Fsp150FrameModificationEntry .1.3.6.1.4.1.2544.1.10.2.3.18.13 |
fsp150FrameModificationEntry Fsp150FrameModificationEntry .1.3.6.1.4.1.2544.1.10.2.3.18.13.1 |
fsp150FrameModificationDeparturePort Fsp150TMPort .1.3.6.1.4.1.2544.1.10.2.3.18.13.1.1 |
fsp150FrameModificationTrafficClass Fsp150TrafficClassIndex .1.3.6.1.4.1.2544.1.10.2.3.18.13.1.2 |
fsp150FrameModificationOutGreenPCPThe PCP (0... 7) to be set in an outgoing frame marked as green.rw INTEGER .1.3.6.1.4.1.2544.1.10.2.3.18.13.1.4 |
fsp150FrameModificationOutGreenDEThe DE (0, 1) to be set in an outgoing frame marked as green.rw INTEGER .1.3.6.1.4.1.2544.1.10.2.3.18.13.1.5 |
fsp150FrameModificationOutYellowPCPThe PCP (0... 7) to be set in an outgoing frame marked as yellow.rw INTEGER .1.3.6.1.4.1.2544.1.10.2.3.18.13.1.6 |
fsp150FrameModificationOutYellowDEThe DE (0, 1) to be set in an outgoing frame marked as yellow.rw INTEGER .1.3.6.1.4.1.2544.1.10.2.3.18.13.1.7 |
fsp150ConfigManagementMIB OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.10.2.3.19 |
fsp150NodeTable SEQUENCE OF Fsp150NodeEntry .1.3.6.1.4.1.2544.1.10.2.3.19.1 |
fsp150NodeEntry Fsp150NodeEntry .1.3.6.1.4.1.2544.1.10.2.3.19.1.1 |
fsp150NodeCmdSpecify the command to performrw Fsp150ConfigMgmtCommandType .1.3.6.1.4.1.2544.1.10.2.3.19.1.1.1 |
fsp150NodeActStatusSpecifies whether the ACTIVE memory configuration is equal to the running node configuration or not.ro Fsp150ConfigMgmtFileStatusType .1.3.6.1.4.1.2544.1.10.2.3.19.1.1.2 |
fsp150NodeBakStatusSpecifies whether the BACKUP memory configuration is equal to the ACTIVE memory configuration or not.ro Fsp150ConfigMgmtFileStatusType .1.3.6.1.4.1.2544.1.10.2.3.19.1.1.3 |
fsp150NetworkPortMulticastConfigTable SEQUENCE OF Fsp150NetworkPortMulticastConfigEntry .1.3.6.1.4.1.2544.1.10.2.3.20 |
fsp150NetworkPortMulticastConfigEntry Fsp150NetworkPortMulticastConfigEntry .1.3.6.1.4.1.2544.1.10.2.3.20.1 |
fsp150NetworkPortMulticastConfigMulticastIGMPConfigrw Fsp150MulticastIGMPConfig .1.3.6.1.4.1.2544.1.10.2.3.20.1.1 |
fsp150AccessPortMulticastConfigTable SEQUENCE OF Fsp150AccessPortMulticastConfigEntry .1.3.6.1.4.1.2544.1.10.2.3.21 |
fsp150AccessPortMulticastConfigEntry Fsp150AccessPortMulticastConfigEntry .1.3.6.1.4.1.2544.1.10.2.3.21.1 |
fsp150AccessPortMulticastConfigMulticastEnablerw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.10.2.3.21.1.1 |
fsp150PerformanceMIB OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.10.2.4 |
fsp150IfPerfTable SEQUENCE OF Fsp150IfPerfEntry .1.3.6.1.4.1.2544.1.10.2.4.1 |
fsp150IfPerfEntry Fsp150IfPerfEntry .1.3.6.1.4.1.2544.1.10.2.4.1.1 |
fsp150IfPerfOutFramesro Counter32 .1.3.6.1.4.1.2544.1.10.2.4.1.1.1 |
fsp150IfPerfOutOctetsro Counter32 .1.3.6.1.4.1.2544.1.10.2.4.1.1.2 |
fsp150IfPerfSingleCollisionFramesro Counter32 .1.3.6.1.4.1.2544.1.10.2.4.1.1.3 |
fsp150IfPerfMultipleCollisionFramesro Counter32 .1.3.6.1.4.1.2544.1.10.2.4.1.1.4 |
fsp150IfPerfInGoodFramesro Counter32 .1.3.6.1.4.1.2544.1.10.2.4.1.1.5 |
fsp150IfPerfInOctetsro Counter32 .1.3.6.1.4.1.2544.1.10.2.4.1.1.6 |
fsp150IfPerfAlignmentErrorsNo longer supported; always returns 0.rodeprecated Counter32 .1.3.6.1.4.1.2544.1.10.2.4.1.1.7 |
fsp150IfPerfFCSErrorsro Counter32 .1.3.6.1.4.1.2544.1.10.2.4.1.1.8 |
fsp150IfPerfFramesTooLongro Counter32 .1.3.6.1.4.1.2544.1.10.2.4.1.1.9 |
fsp150IfPerfSymbolErrorsNo longer supported; always returns 0.rodeprecated Counter32 .1.3.6.1.4.1.2544.1.10.2.4.1.1.10 |
fsp150IfPerfOutTestFramesTest frames are only counted on ports that support loopback test. They do not include OAM frames.ro Counter32 .1.3.6.1.4.1.2544.1.10.2.4.1.1.11 |
fsp150IfPerfInTestFramesro Counter32 .1.3.6.1.4.1.2544.1.10.2.4.1.1.12 |
fsp150IfPerfRFCSErrorsro Counter32 .1.3.6.1.4.1.2544.1.10.2.4.1.1.13 |
fsp150IfPerfROutTestFramesro Counter32 .1.3.6.1.4.1.2544.1.10.2.4.1.1.14 |
fsp150IfPerfRInTestFramesro Counter32 .1.3.6.1.4.1.2544.1.10.2.4.1.1.15 |
fsp150IfPerfRInGoodFramesro Counter32 .1.3.6.1.4.1.2544.1.10.2.4.1.1.16 |
fsp150IfPerfROutFramesro Counter32 .1.3.6.1.4.1.2544.1.10.2.4.1.1.17 |
fsp150IfPerfROutOctetsro Counter32 .1.3.6.1.4.1.2544.1.10.2.4.1.1.18 |
fsp150IfPerfRInOctetsro Counter32 .1.3.6.1.4.1.2544.1.10.2.4.1.1.19 |
fsp150IfPerfRFramesTooLongro Counter32 .1.3.6.1.4.1.2544.1.10.2.4.1.1.20 |
fsp150IfPerfRTestFCSErrorsro Counter32 .1.3.6.1.4.1.2544.1.10.2.4.1.1.21 |
fsp150IfPerfRSingleCollisionFramesro Counter32 .1.3.6.1.4.1.2544.1.10.2.4.1.1.22 |
fsp150IfPerfRMultipleCollisionFramesro Counter32 .1.3.6.1.4.1.2544.1.10.2.4.1.1.23 |
fsp150IfOAMStatsTable SEQUENCE OF Fsp150IfOAMStatsEntry .1.3.6.1.4.1.2544.1.10.2.4.2 |
fsp150IfOAMStatsEntry Fsp150IfOAMStatsEntry .1.3.6.1.4.1.2544.1.10.2.4.2.1 |
fsp150IfOAMStatsPduTxro Counter32 .1.3.6.1.4.1.2544.1.10.2.4.2.1.1 |
fsp150IfOAMStatsPduRxro Counter32 .1.3.6.1.4.1.2544.1.10.2.4.2.1.2 |
fsp150IfOAMStatsInformationTxro Counter32 .1.3.6.1.4.1.2544.1.10.2.4.2.1.3 |
fsp150IfOAMStatsInformationRxro Counter32 .1.3.6.1.4.1.2544.1.10.2.4.2.1.4 |
fsp150IfOAMStatsUniqueEventNotificationTxro Counter32 .1.3.6.1.4.1.2544.1.10.2.4.2.1.5 |
fsp150IfOAMStatsUniqueEventNotificationRxro Counter32 .1.3.6.1.4.1.2544.1.10.2.4.2.1.6 |
fsp150IfOAMStatsDuplicateEventNotificationRxro Counter32 .1.3.6.1.4.1.2544.1.10.2.4.2.1.7 |
fsp150IfOAMStatsLoopbackControlTxro Counter32 .1.3.6.1.4.1.2544.1.10.2.4.2.1.8 |
fsp150IfOAMStatsLoopbackControlRxro Counter32 .1.3.6.1.4.1.2544.1.10.2.4.2.1.9 |
fsp150IfOAMStatsVariableRequestTxro Counter32 .1.3.6.1.4.1.2544.1.10.2.4.2.1.10 |
fsp150IfOAMStatsVariableRequestRxro Counter32 .1.3.6.1.4.1.2544.1.10.2.4.2.1.11 |
fsp150IfOAMStatsVariableResponseTxro Counter32 .1.3.6.1.4.1.2544.1.10.2.4.2.1.12 |
fsp150IfOAMStatsVariableResponseRxro Counter32 .1.3.6.1.4.1.2544.1.10.2.4.2.1.13 |
fsp150IfOAMStatsOrgSpecificTxro Counter32 .1.3.6.1.4.1.2544.1.10.2.4.2.1.14 |
fsp150IfOAMStatsOrgSpecificRxro Counter32 .1.3.6.1.4.1.2544.1.10.2.4.2.1.15 |
fsp150IfOAMStatsUnsupportedCodesRxro Counter32 .1.3.6.1.4.1.2544.1.10.2.4.2.1.16 |
fsp150IfOAMStatsDuplicateEventNotificationTxro Counter32 .1.3.6.1.4.1.2544.1.10.2.4.2.1.17 |
fsp150IfOAMStatsUnsupportedCodesTxro Counter32 .1.3.6.1.4.1.2544.1.10.2.4.2.1.18 |
fsp150IfOAMStatsFramesLostDueToOamro Counter32 .1.3.6.1.4.1.2544.1.10.2.4.2.1.19 |
fsp150SystemStatsTable SEQUENCE OF Fsp150SystemStatsEntry .1.3.6.1.4.1.2544.1.10.2.4.3 |
fsp150SystemStatsEntry Fsp150SystemStatsEntry .1.3.6.1.4.1.2544.1.10.2.4.3.1 |
fsp150SystemStatsEgressArrivalPathChangesro Counter32 .1.3.6.1.4.1.2544.1.10.2.4.3.1.1 |
fsp150SystemStatsEgressBufferOverflowLowCounts the number of times one of the low priority egress buffers overflowed.ro Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.4.3.1.2 |
fsp150SystemStatsEgressBufferOverflowMedCounts the number of times one of the medium priority egress buffers overflowed.ro Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.4.3.1.3 |
fsp150SystemStatsEgressBufferOverflowHighCounts the number of times one of the medium priority egress buffers overflowed.ro Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.4.3.1.4 |
fsp150SystemStatsIngressBufferOverflowLowCounts the number of times one of the low priority ingress buffers overflowed.ro Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.4.3.1.5 |
fsp150SystemStatsIngressBufferOverflowMedCounts the number of times one of the medium priority ingress buffers overflowed.ro Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.4.3.1.6 |
fsp150SystemStatsIngressBufferOverflowHighCounts the number of times one of the high priority ingress buffers overflowed.ro Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.4.3.1.7 |
fsp150SystemStatsEgressMulticastRegOverflowCounts the number of times the multicast regulator overflowsro Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.4.3.1.8 |
fsp150IfPerf64Table SEQUENCE OF Fsp150IfPerf64Entry .1.3.6.1.4.1.2544.1.10.2.4.4 |
fsp150IfPerf64Entry Fsp150IfPerf64Entry .1.3.6.1.4.1.2544.1.10.2.4.4.1 |
fsp150IfPerf64OutOctets64ro Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.4.4.1.2 |
fsp150IfPerf64InOctets64ro Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.4.4.1.6 |
fsp150IfPerf64SymbolErrors64No longer supported; always returns '0'.rodeprecated Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.4.4.1.10 |
fsp150IfPerf64MulticastFramesRx64ro Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.4.4.1.11 |
fsp150IfPerf64MulticastFramesTx64ro Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.4.4.1.12 |
fsp150IfPerf64MulticastOctetsRx64ro Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.4.4.1.13 |
fsp150IfPerf64MulticastOctetsTx64ro Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.4.4.1.14 |
fsp150TrapMIB OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.10.2.5.0 |
fsp150TrapsinkChangeThe neTrapsinkTable has been changed. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.51 |
fsp150NeAttributeValueChangeA variable associated with the NE has been changed. The trap contains the changed variable as the first varbind. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.52 |
fsp150TopologyChangeThe fsp150TopologyTable has changed. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.53 |
fsp150InterfaceAttributeValueChangeA variable associated with an interface has been changed. The trap contains the changed variable as the first varbind. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.54 |
fsp150EquipmentAttributeValueChangeA variable associated with a piece of equipment has been changed. The trap contains the changed variable as the first varbind. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.55 |
fsp150ProtectionSwitchThe system has switched to the other network. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.56 |
fsp150InterfaceStatusChangeThe status of an interface has changed. The trap contains the changed status variable as the first varbind. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.57 |
fsp150DyingGaspAn EFM Dying Gasp has been received from a remote system managed by this agent. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.58 |
fsp150TempTooHigh NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.100 |
fsp150NoTempTooHighfsp150TempTooHigh has been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.101 |
fsp150PSUFailure NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.102 |
fsp150NoPSUFailurefsp150PSUFailure has been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.103 |
fsp150FanFailure NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.104 |
fsp150NoFanFailurefsp150FanFailure has been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.105 |
fsp150VoltageTooLow NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.106 |
fsp150NoVoltageTooLowfsp150VoltageTooLow has been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.107 |
fsp150VoltageTooHigh NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.108 |
fsp150NoVoltageTooHighfsp150VoltageTooHigh has been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.109 |
fsp150LocalChassisMissing NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.110 |
fsp150NoLocalChassisMissingfsp150LocalChassisMissing has been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.111 |
fsp150LocalChassisMismatch NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.112 |
fsp150NoLocalChassisMismatchfsp150LocalChassisMismatch has been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.113 |
fsp150ConfiguringThe chassis and its ports are in the process of being configured according to the saved configuration. Until the end of this process no notifications are sent. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.114 |
fsp150NoConfiguringfsp150Configuring has been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.115 |
fsp150ConfigFailedConfiguring the chassis according to the saved configuration failed. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.116 |
fsp150NoConfigFailedfsp150ConfigFailed has been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.117 |
fsp150LossOfSignal NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.200 |
fsp150NoLossOfSignalfsp150LossOfSignal has been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.201 |
fsp150EqMismatch NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.202 |
fsp150NoEqMismatchfsp150EqMismatch has been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.203 |
fsp150LowOIP NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.204 |
fsp150NoLowOIPfsp150LowOIP has been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.205 |
fsp150TxFailure NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.206 |
fsp150NoTxFailurefsp150TxFailure has been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.207 |
fsp150LossOfLink NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.208 |
fsp150NoLossOfLinkfsp150LossOfLink has been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.209 |
fsp150RemoteChassisMissingThe logical configuration has a remote chassis for this port but no remote chassis is physically connected. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.210 |
fsp150NoRemoteChassisMissingfsp150RemoteChassisMissing has been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.211 |
fsp150RemoteChassisMismatchThe port is connected in a way that doesn't match the saved logical configuration. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.212 |
fsp150NoRemoteChassisMismatchfsp150RemoteChassisMismatch has been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.213 |
fsp150Loopback NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.214 |
fsp150NoLoopbackfsp150Loopback has been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.215 |
fsp150SFPMissing NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.216 |
fsp150NoSFPMissingfsp150SFPMissing has been cleared. NOTIFICATION-TYPE .1.3.6.1.4.1.2544.1.10.2.5.0.217 |
fsp150VendorTypes OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.10.2.6 |
fsp150Chassis OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.10.2.6.3 |
fsp150ChassisUnknown OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.10.2.6.3.1 |
fsp150ChassisFsp150CP10100 OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.10.2.6.3.2 |
fsp150ChassisFsp150CPGigabit OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.10.2.6.3.3 |
fsp150ChassisFsp150MO OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.10.2.6.3.5 |
fsp150ChassisFsp150ME OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.10.2.6.3.6 |
fsp150ChassisFsp150CPGigabitRev2 OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.10.2.6.3.7 |
fsp150ChassisFsp150MG OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.10.2.6.3.8 |
fsp150PowerSupplies OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.10.2.6.6 |
fsp150PowerSupplyUnknown OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.10.2.6.6.1 |
fsp150PowerSupplyAC OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.10.2.6.6.2 |
fsp150PowerSupplyDC OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.10.2.6.6.3 |
fsp150Ports OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.10.2.6.10 |
fsp150PortUnknown OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.10.2.6.10.1 |
fsp150PortNetwork OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.10.2.6.10.2200 |
fsp150PortOpticalAccess OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.10.2.6.10.2201 |
fsp150PortElectricalAccess OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.10.2.6.10.2202 |
fsp150PortAccess OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.10.2.6.10.2203 |
fsp150PortElectricalNetwork OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.10.2.6.10.2204 |
fsp150PidTranslation OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.10.2.7 |
fsp150PidToSvidTable SEQUENCE OF Fsp150PidToSvidEntry .1.3.6.1.4.1.2544.1.10.2.7.1 |
fsp150PidToSvidEntry Fsp150PidToSvidEntry .1.3.6.1.4.1.2544.1.10.2.7.1.1 |
fsp150PidToSvidPid Unsigned32 .1.3.6.1.4.1.2544.1.10.2.7.1.1.1 |
fsp150PidToSvidSvidControls the mapping between and Service VLAN IDs (SVID) Port IDs (PID). If a PID results in SVID -1, the packet is dropped.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.2544.1.10.2.7.1.1.2 |
fsp150SvidToPidTable SEQUENCE OF Fsp150SvidToPidEntry .1.3.6.1.4.1.2544.1.10.2.7.2 |
fsp150SvidToPidEntry Fsp150SvidToPidEntry .1.3.6.1.4.1.2544.1.10.2.7.2.1 |
fsp150SvidToPidSvid Unsigned32 .1.3.6.1.4.1.2544.1.10.2.7.2.1.1 |
fsp150SvidToPidPidControls the mapping between Port IDs (PID) and Service VLAN IDs (SVID). If a SVID results in PID -1, the packet is dropped.ro INTEGER (-2147483648..2147483647) .1.3.6.1.4.1.2544.1.10.2.7.2.1.2 |
fsp150TrafficTestMIB OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.10.2.8 |
fsp150IngressGeneratorConfigTable SEQUENCE OF Fsp150IngressGeneratorConfigEntry .1.3.6.1.4.1.2544.1.10.2.8.1 |
fsp150IngressGeneratorConfigEntry Fsp150IngressGeneratorConfigEntry .1.3.6.1.4.1.2544.1.10.2.8.1.1 |
fsp150IngressGeneratorConfigPortIndexAssign the packet generator to a certain port. The ingress generator can be assigned to an access port while the egress generator can be assigned to a network port.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2544.1.10.2.8.1.1.1 |
fsp150IngressGeneratorConfigFrameSizeGenerate packets with a certain frame size in the interval from 64bytes to 9250bytesrw INTEGER .1.3.6.1.4.1.2544.1.10.2.8.1.1.2 |
fsp150IngressGeneratorConfigFrameCountGenerate a certain number of packets in the interval from 1 to 2^32 (4294967295) packets or to generate packets in continuous mode (0)rw Unsigned32 .1.3.6.1.4.1.2544.1.10.2.8.1.1.3 |
fsp150IngressGeneratorConfigSignatureGenerate packets with a certain 8byte signature, which can be configured in hex or ASCIIrw DisplayString .1.3.6.1.4.1.2544.1.10.2.8.1.1.4 |
fsp150IngressGeneratorConfigPayloadThe remaining part of the pre-defined ADVA specific frame can be configured to different patterns such as random bytes, incremental bytes, all ones or all zeros. Random bytes is according to the IEEE short continuous random test patternrw Fsp150TTPayloadType .1.3.6.1.4.1.2544.1.10.2.8.1.1.5 |
fsp150IngressGeneratorConfigCirGenerate packets at a certain bitrate in the interval from 0kbps to 1048512kbpsrw Unsigned32 .1.3.6.1.4.1.2544.1.10.2.8.1.1.6 |
fsp150IngressGeneratorConfigCbsGenerate packets with a certain burst in the interval from 16kByte to 4095kByterw Unsigned32 .1.3.6.1.4.1.2544.1.10.2.8.1.1.7 |
fsp150IngressGeneratorConfigSVlanEnableSpecify whether a service VLAN tag should be inserted into the pre-defined ADVA specific frame or not. The service VLAN tag is optionally for the ingress generator, but mandatory for the egress generator. Note. The service VLAN tag is mandatory since the VID specifies the access port for which the packets will be routed through the node(s), e.g. a VID equal to two means that the packets will be routed to access port 2rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.10.2.8.1.1.8 |
fsp150IngressGeneratorConfigSVlanVidThe VLAN ID of the service VLAN tagrw INTEGER .1.3.6.1.4.1.2544.1.10.2.8.1.1.9 |
fsp150IngressGeneratorConfigSVlanPriorityThe priority of the service VLAN tagrw INTEGER .1.3.6.1.4.1.2544.1.10.2.8.1.1.10 |
fsp150IngressGeneratorConfigCVlanEnableSpecify whether a customer VLAN tag should be inserted into the pre-defined ADVA specific frame or notrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.10.2.8.1.1.11 |
fsp150IngressGeneratorConfigCVlanVidThe VLAN ID of the customer VLAN tagrw INTEGER .1.3.6.1.4.1.2544.1.10.2.8.1.1.12 |
fsp150IngressGeneratorConfigCVlanPriorityThe priority of the customer VLAN tagrw INTEGER .1.3.6.1.4.1.2544.1.10.2.8.1.1.13 |
fsp150IngressGeneratorConfigStateThe state of the generatorrw Fsp150TTStateType .1.3.6.1.4.1.2544.1.10.2.8.1.1.14 |
fsp150IngressGeneratorStatusTable SEQUENCE OF Fsp150IngressGeneratorStatusEntry .1.3.6.1.4.1.2544.1.10.2.8.2 |
fsp150IngressGeneratorStatusEntry Fsp150IngressGeneratorStatusEntry .1.3.6.1.4.1.2544.1.10.2.8.2.1 |
fsp150IngressGeneratorStatusStateRunning state of the generatorro Fsp150TTStateType .1.3.6.1.4.1.2544.1.10.2.8.2.1.1 |
fsp150IngressGeneratorStatusRateGeneratedGenerated rate in kbpsro Unsigned32 .1.3.6.1.4.1.2544.1.10.2.8.2.1.2 |
fsp150IngressGeneratorStatusFramesGeneratedNumber of frames generatedro OCTET STRING .1.3.6.1.4.1.2544.1.10.2.8.2.1.3 |
fsp150EgressGeneratorConfigTable SEQUENCE OF Fsp150EgressGeneratorConfigEntry .1.3.6.1.4.1.2544.1.10.2.8.3 |
fsp150EgressGeneratorConfigEntry Fsp150EgressGeneratorConfigEntry .1.3.6.1.4.1.2544.1.10.2.8.3.1 |
fsp150EgressGeneratorConfigPortIndexAssign the packet generator to a certain port. The ingress generator can be assigned to an access port while the egress generator can be assigned to a network port.rw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2544.1.10.2.8.3.1.1 |
fsp150EgressGeneratorConfigFrameSizeGenerate packets with a certain frame size in the interval from 64bytes to 9250bytesrw INTEGER .1.3.6.1.4.1.2544.1.10.2.8.3.1.2 |
fsp150EgressGeneratorConfigFrameCountGenerate a certain number of packets in the interval from 1 to 2^32 (4294967295) packets or to generate packets in continuous mode (0)rw Unsigned32 .1.3.6.1.4.1.2544.1.10.2.8.3.1.3 |
fsp150EgressGeneratorConfigSignatureGenerate packets with a certain 8byte signature, which can be configured in hex or ASCIIrw DisplayString .1.3.6.1.4.1.2544.1.10.2.8.3.1.4 |
fsp150EgressGeneratorConfigPayloadThe remaining part of the pre-defined ADVA specific frame can be configured to different patterns such as random bytes, incremental bytes, all ones or all zeros. Random bytes is according to the IEEE short continuous random test patternrw Fsp150TTPayloadType .1.3.6.1.4.1.2544.1.10.2.8.3.1.5 |
fsp150EgressGeneratorConfigCirGenerate packets at a certain bitrate in the interval from 0kbps to 1048512kbpsrw Unsigned32 .1.3.6.1.4.1.2544.1.10.2.8.3.1.6 |
fsp150EgressGeneratorConfigCbsGenerate packets with a certain burst in the interval from 16kByte to 4095kByterw Unsigned32 .1.3.6.1.4.1.2544.1.10.2.8.3.1.7 |
fsp150EgressGeneratorConfigSVlanVidThe VLAN ID of the service VLAN tagrw INTEGER .1.3.6.1.4.1.2544.1.10.2.8.3.1.8 |
fsp150EgressGeneratorConfigSVlanPriorityThe priority of the service VLAN tagrw INTEGER .1.3.6.1.4.1.2544.1.10.2.8.3.1.9 |
fsp150EgressGeneratorConfigCVlanEnableSpecify whether a customer VLAN tag should be inserted into the pre-defined ADVA specific frame or notrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.10.2.8.3.1.10 |
fsp150EgressGeneratorConfigCVlanVidThe VLAN ID of the customer VLAN tagrw INTEGER .1.3.6.1.4.1.2544.1.10.2.8.3.1.11 |
fsp150EgressGeneratorConfigCVlanPriorityThe priority of the customer VLAN tagrw INTEGER .1.3.6.1.4.1.2544.1.10.2.8.3.1.12 |
fsp150EgressGeneratorConfigStateThe state of the generatorrw Fsp150TTStateType .1.3.6.1.4.1.2544.1.10.2.8.3.1.13 |
fsp150EgressGeneratorStatusTable SEQUENCE OF Fsp150EgressGeneratorStatusEntry .1.3.6.1.4.1.2544.1.10.2.8.4 |
fsp150EgressGeneratorStatusEntry Fsp150EgressGeneratorStatusEntry .1.3.6.1.4.1.2544.1.10.2.8.4.1 |
fsp150EgressGeneratorStatusStateRunning state of the generatorro Fsp150TTStateType .1.3.6.1.4.1.2544.1.10.2.8.4.1.1 |
fsp150EgressGeneratorStatusRateGeneratedGenerated rate in kbpsro Unsigned32 .1.3.6.1.4.1.2544.1.10.2.8.4.1.2 |
fsp150EgressGeneratorStatusFramesGeneratedNumber of frames generatedro OCTET STRING .1.3.6.1.4.1.2544.1.10.2.8.4.1.3 |
fsp150IngressFilterConfigTable SEQUENCE OF Fsp150IngressFilterConfigEntry .1.3.6.1.4.1.2544.1.10.2.8.5 |
fsp150IngressFilterConfigEntry Fsp150IngressFilterConfigEntry .1.3.6.1.4.1.2544.1.10.2.8.5.1 |
fsp150IngressFilterConfigEnableEnable/disable the filterrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.10.2.8.5.1.1 |
fsp150IngressFilterConfigPortIndexAssign the filter to a certain access port for which statistics of received frames will be performedrw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2544.1.10.2.8.5.1.2 |
fsp150IngressFilterConfigSignatureDetect frames with a certain 8byte signature, which can be configured in hex or ASCIIrw DisplayString .1.3.6.1.4.1.2544.1.10.2.8.5.1.3 |
fsp150IngressFilterConfigActionTo drop or pass detected packets through the node, i.e. filter action configurationrw Fsp150TTActionType .1.3.6.1.4.1.2544.1.10.2.8.5.1.4 |
fsp150EgressFilterConfigTable SEQUENCE OF Fsp150EgressFilterConfigEntry .1.3.6.1.4.1.2544.1.10.2.8.6 |
fsp150EgressFilterConfigEntry Fsp150EgressFilterConfigEntry .1.3.6.1.4.1.2544.1.10.2.8.6.1 |
fsp150EgressFilterConfigEnableEnable/disable the filterrw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.10.2.8.6.1.1 |
fsp150EgressFilterConfigPortIndexAssign the filter to a certain access port for which statistics of received frames will be performedrw InterfaceIndex (IF-MIB) .1.3.6.1.4.1.2544.1.10.2.8.6.1.2 |
fsp150EgressFilterConfigSignatureDetect frames with a certain 8byte signature, which can be configured in hex or ASCIIrw DisplayString .1.3.6.1.4.1.2544.1.10.2.8.6.1.3 |
fsp150EgressFilterConfigActionTo drop or pass detected packets through the node, i.e. filter action configurationrw Fsp150TTActionType .1.3.6.1.4.1.2544.1.10.2.8.6.1.4 |
fsp150IngressFilterStatusTable SEQUENCE OF Fsp150IngressFilterStatusEntry .1.3.6.1.4.1.2544.1.10.2.8.7 |
fsp150IngressFilterStatusEntry Fsp150IngressFilterStatusEntry .1.3.6.1.4.1.2544.1.10.2.8.7.1 |
fsp150IngressFilterStatusFramesReceivedOneAccessNumber of frames detected by filter on the assigned access portro Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.8.7.1.1 |
fsp150IngressFilterStatusBytesReceivedOneAccessNumber of bytes detected by filter on the assigned access portro Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.8.7.1.2 |
fsp150IngressFilterStatusFramesReceivedAllAccessNumber of frames detected by filter on any access portro Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.8.7.1.3 |
fsp150IngressFilterStatusBytesReceivedAllAccessNumber of bytes detected by filter on any access portro Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.8.7.1.4 |
fsp150IngressFilterStatusFramesSentNetwork1Number of frames detected by filter on network1ro Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.8.7.1.5 |
fsp150IngressFilterStatusBytesSentNetwork1Number of bytes detected by filter on network1ro Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.8.7.1.6 |
fsp150IngressFilterStatusFramesSentNetwork2Number of frames detected by filter on network2ro Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.8.7.1.7 |
fsp150IngressFilterStatusBytesSentNetwork2Number of bytes detected by filter on network2ro Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.8.7.1.8 |
fsp150IngressFilterStatusFramesActionDroppedNumber of frames detected by filter and dropped due to filter actionro Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.8.7.1.9 |
fsp150IngressFilterStatusRegulatorOverflowDroppedNumber of frames detected by filter and dropped due to regulator overflowro Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.8.7.1.10 |
fsp150IngressFilterStatusBufferOverflowDroppedNumber of frames detected by filter and dropped due to buffer overflowro Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.8.7.1.11 |
fsp150IngressFilterStatusOtherReasonDroppedNumber of frames detected by filter and dropped due to other reasonro Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.8.7.1.12 |
fsp150EgressFilterStatusTable SEQUENCE OF Fsp150EgressFilterStatusEntry .1.3.6.1.4.1.2544.1.10.2.8.8 |
fsp150EgressFilterStatusEntry Fsp150EgressFilterStatusEntry .1.3.6.1.4.1.2544.1.10.2.8.8.1 |
fsp150EgressFilterStatusFramesReceivedNetwork1Number of frames detected by filter on network1ro Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.8.8.1.1 |
fsp150EgressFilterStatusBytesReceivedNetwork1Number of bytes detected by filter on network1ro Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.8.8.1.2 |
fsp150EgressFilterStatusFramesReceivedNetwork2Number of frames detected by filter on network2ro Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.8.8.1.3 |
fsp150EgressFilterStatusBytesReceivedNetwork2Number of bytes detected by filter on network2ro Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.8.8.1.4 |
fsp150EgressFilterStatusFramesSentOneAccessNumber of frames detected by filter on the assigned access portro Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.8.8.1.5 |
fsp150EgressFilterStatusBytesSentOneAccessNumber of bytes detected by filter on the assigned access portro Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.8.8.1.6 |
fsp150EgressFilterStatusFramesSentAllAccessNumber of frames detected by filter on any access portro Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.8.8.1.7 |
fsp150EgressFilterStatusBytesSentAllAccessNumber of bytes detected by filter on any access portro Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.8.8.1.8 |
fsp150EgressFilterStatusFramesActionDroppedNumber of frames detected by filter and dropped due to filter actionro Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.8.8.1.9 |
fsp150EgressFilterStatusRegulatorOverflowDroppedNumber of frames detected by filter and dropped due to regulator overflowro Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.8.8.1.10 |
fsp150EgressFilterStatusBufferOverflowDroppedNumber of frames detected by filter and dropped due to buffer overflowro Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.8.8.1.11 |
fsp150EgressFilterStatusOtherReasonDroppedNumber of frames detected by filter and dropped due to other reasonro Counter64String (ADVA-MIB) .1.3.6.1.4.1.2544.1.10.2.8.8.1.12 |
fsp150UpgradeMIB OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.10.2.9 |
fsp150UpgradeFwStatusTable SEQUENCE OF Fsp150UpgradeFwStatusEntry .1.3.6.1.4.1.2544.1.10.2.9.1 |
fsp150UpgradeFwStatusEntry Fsp150UpgradeFwStatusEntry .1.3.6.1.4.1.2544.1.10.2.9.1.1 |
fsp150UpgradeFwStatusStateThe UpgradeState to the GetUpgradeFwStatus functionro Fsp150UpgradeState .1.3.6.1.4.1.2544.1.10.2.9.1.1.1 |
fsp150UpgradeFwStatusProgressThe progress to the GetUpgradeFwStatus functionro INTEGER (-32768..32767) .1.3.6.1.4.1.2544.1.10.2.9.1.1.2 |
fsp150UpgradeFwStatusDetailedMsgThe detailed message to the GetUpgradeFwStatus functionro DisplayString .1.3.6.1.4.1.2544.1.10.2.9.1.1.3 |
fsp150UpgradeFwStatusProgressAvailableThe available of progress to the GetUpgradeFwStatus functionro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.10.2.9.1.1.4 |
fsp150UpgradeFwRequestTable SEQUENCE OF Fsp150UpgradeFwRequestEntry .1.3.6.1.4.1.2544.1.10.2.9.2 |
fsp150UpgradeFwRequestEntry Fsp150UpgradeFwRequestEntry .1.3.6.1.4.1.2544.1.10.2.9.2.1 |
fsp150UpgradeFwRequestUrlThe URL to the SetUpgradeFwRequest functionrw DisplayString .1.3.6.1.4.1.2544.1.10.2.9.2.1.1 |
fsp150UpgradeFwRequestRequestThe request to the SetUpgradeFwRequest functionrw Fsp150UpgradeRequestCmd .1.3.6.1.4.1.2544.1.10.2.9.2.1.2 |