FR-MIB
This file contains MIB module for Frame Relay implementation.
Main OID:
nnfrMib.1.3.6.1.4.1.562.73.1.1.1.16
105
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
105 total| Object Name |
|---|
nnfrMibThis file contains MIB module for
Frame Relay implementation. MODULE-IDENTITY .1.3.6.1.4.1.562.73.1.1.1.16 |
nnfrTableA list of a Frame Relay interface configuration parameters.
The table contains parameters for both the uni and multi
link frame-relay interface. SEQUENCE OF NnFrTableEntry .1.3.6.1.4.1.562.73.1.1.1.16.1 |
nnfrTableEntryAn entry in the frTable.
The bundle Id forms the index into the table. NnFrTableEntry .1.3.6.1.4.1.562.73.1.1.1.16.1.1 |
nnfrIfEnableEnables or disables the frame-relay interface. By
default frame- relay interface is enabled. Writing
zero (0) disables frame-relay interface.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.562.73.1.1.1.16.1.1.1 |
nnfrEnablePvcAllEnables all PVCs related to the interface. By default all
PVCs related to an interface are disabled. Writing One (1)
enables all PVCs at the same time for an interface indexed
by bundleId.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.562.73.1.1.1.16.1.1.2 |
nnfrFrameSizeMaximum Size of the frame that will be configured for
this Frame Relay interface. The value for frame size
ranges from 56 to 4096 bytes, with a default value of
1600 bytes.rw Integer32 .1.3.6.1.4.1.562.73.1.1.1.16.1.1.3 |
nnfrIfTypeIndicates the interface type for the frame-relay
interface.rw Enumeration .1.3.6.1.4.1.562.73.1.1.1.16.1.1.4 |
nnfrLmiTypeLocal management Interface type for the frame-relay
interface.
It can take any of the following three values:
ansi - ANSI T1.617 (Annex D),
cisco - Cisco LMI,
q933a - ITU-T Q.933 (Annex A)
To disable lmi operation, set the value to none(0).rw Enumeration .1.3.6.1.4.1.562.73.1.1.1.16.1.1.5 |
nnfrLmiDceN392DCE/UNI error threshold value. Ranges from 1 to 10,
with a default value of 9. To configure the value
of this variable, LMI type should be configured.rw Integer32 .1.3.6.1.4.1.562.73.1.1.1.16.1.1.6 |
nnfrLmiDceN393DCE/UNI monitored events count. Ranges from 1 to 10,
with a default value of 10. To configure the value
of this variable, LMI type should be configured.rw Integer32 .1.3.6.1.4.1.562.73.1.1.1.16.1.1.7 |
nnfrLmiDteN392DTE/UNI error threshold. Ranges from 1 to 10, with a
default value of 9. To configure the value of this
variable, LMI type should be configured.rw Integer32 .1.3.6.1.4.1.562.73.1.1.1.16.1.1.8 |
nnfrLmiDteN393DTE/UNI monitored events count. Ranges from 1 to 10,
with a default value of 10. To configure the value
of this variable, LMI type should be configured.rw Integer32 .1.3.6.1.4.1.562.73.1.1.1.16.1.1.9 |
nnfrLmiDteN391DTE/UNI full status polling interval. Ranges from 1
to 255, with a default value of 6. To configure the
value of this variable, LMI type should be configured.rw Integer32 .1.3.6.1.4.1.562.73.1.1.1.16.1.1.10 |
nnfrLmiKeepaliveLocal management interface keepalive polling interval
time in seconds. The value for this ranges from 5
seconds to 255 seconds with a default value of 10
seconds. To configure the value of this variable,
LMI type should be configured.rw Integer32 .1.3.6.1.4.1.562.73.1.1.1.16.1.1.11 |
nnmfrAckMsgTimerThe time to wait for an ADD_LINK_ACK message
before timing out.rw Integer32 .1.3.6.1.4.1.562.73.1.1.1.16.1.1.12 |
nnmfrAckMsgMaxRetryMaximum number of Retries for the Ack Msg. This
variable can be set on a multilink bundle.rw Integer32 .1.3.6.1.4.1.562.73.1.1.1.16.1.1.13 |
nnmfrClassclassA
classB
classC
are UP.
In the case of classC, mfrClassThreshold should be
configured with mfrClass in an atomic set operation.
This variable can be set on a multilink bundle but
not on a uni link bundle.rw Enumeration .1.3.6.1.4.1.562.73.1.1.1.16.1.1.14 |
nnmfrClassThresholdThreshold - minimum number of links required to
activate bundle, for a mfrClass, classC. This
variable can be set on a multilink bundle but not
on a uni link bundle.rw Integer32 .1.3.6.1.4.1.562.73.1.1.1.16.1.1.15 |
nnmfrFrameSizeThe frame size for multi-link frame relay. This
variable can be set on a multilink bundle but not
on a uni link bundle.rw Integer32 .1.3.6.1.4.1.562.73.1.1.1.16.1.1.16 |
nnmfrHelloTimerHello timer in seconds. This variable can be set
on a multilink bundle but not on a uni link bundle.rw Integer32 .1.3.6.1.4.1.562.73.1.1.1.16.1.1.17 |
nnmfrSegThresholdSegment threshold packet size in bytes. This variable
can be set on a multilink bundle but not on a uni link
bundle.rw Integer32 .1.3.6.1.4.1.562.73.1.1.1.16.1.1.18 |
nnmfrDiffDelayDifferential delay in milli seconds. This variable
can be set on a multilink bundle but not on a uni
link bundle.rw Integer32 .1.3.6.1.4.1.562.73.1.1.1.16.1.1.19 |
nnfrPvcTableA list of Frame Relay PVC parameters. SEQUENCE OF NnFrPvcTableEntry .1.3.6.1.4.1.562.73.1.1.1.16.2 |
nnfrPvcTableEntryAn entry in the frPvcTable NnFrPvcTableEntry .1.3.6.1.4.1.562.73.1.1.1.16.2.1 |
nnfrPvcDlciData Link Connection Identifier of the PVC. The value
ranges from 16 to 991. The Dlci is unique for a bundle
but Dlci numbers can be reused across bundles. Integer32 .1.3.6.1.4.1.562.73.1.1.1.16.2.1.1 |
nnfrPvcEnableEnables PVC for given interface name and DLCI number. By
default PVC is enabled. Writing one(1) on this enables
PVC, zero (0) disables it.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.562.73.1.1.1.16.2.1.2 |
nnfrPvcDescrDescription for the configured PVC.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.73.1.1.1.16.2.1.3 |
nnfrPvcIpAddrIP address to be configured for the PVC.
PVC IP subnet Mask variable should also be configured
alongwith this variable. A set on this variable will be
successful only if the subnetmask is also set in the
same request. To unconfigure the Ip address, a set is
issued with the value of the ip address as 0.0.0.0rw IpAddress .1.3.6.1.4.1.562.73.1.1.1.16.2.1.4 |
nnfrPvcIpSubnetMaskSubnet mask to be configured alongwith PVC IP address.
This variable should be configured alongwith PVC IP
address.rw IpAddress .1.3.6.1.4.1.562.73.1.1.1.16.2.1.5 |
nnfrPvcRemoteIpAddrRemote IP address to be mapped for PVCrw IpAddress .1.3.6.1.4.1.562.73.1.1.1.16.2.1.6 |
nnfrPvcPolicingEnableThis variable is to disable/enable policing for PVC.
Writing zero (0) on this disables policing for the
PVC. By default policing is enabled.rw Enumeration .1.3.6.1.4.1.562.73.1.1.1.16.2.1.7 |
nnfrPvcPolicingDeIf enabled, received frames that exceed policing
threshold, will be tagged with DE bit. This variable
can be configured only if policing is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.562.73.1.1.1.16.2.1.8 |
nnfrPvcPolicingCirCommitted Information Rate( bits per second )
in receive direction for PVC. This variable can be
configured only if policing is enabled.rw Integer32 UNITS "bps" .1.3.6.1.4.1.562.73.1.1.1.16.2.1.9 |
nnfrPvcPolicingBcCommitted Burst ( bits ) in receive direction for PVC.
This variable can be configured only if policing is
enabled.rw Integer32 UNITS "bps" .1.3.6.1.4.1.562.73.1.1.1.16.2.1.10 |
nnfrPvcPolicingBeExcess burst ( bits ) in receive direction for PVC. This
variable can be configured only if policing enabled.rw Integer32 .1.3.6.1.4.1.562.73.1.1.1.16.2.1.11 |
nnfrPvcShapingCirThe committed information rate (in bits per second) to be
configured for the PVC.rw Integer32 UNITS "bps" .1.3.6.1.4.1.562.73.1.1.1.16.2.1.12 |
nnfrPvcShapingBcMaxThe maximum committed burst (bits) to be configured
for the PVC.rw Integer32 UNITS "bps" .1.3.6.1.4.1.562.73.1.1.1.16.2.1.13 |
nnfrPvcShapingBcMinThe minimum committed burst (bits) to be configured
for the PVC.rw Integer32 UNITS "bps" .1.3.6.1.4.1.562.73.1.1.1.16.2.1.14 |
nnfrPvcShapingBeThe excess burst (bits) to be configured for the PVC.rw Integer32 .1.3.6.1.4.1.562.73.1.1.1.16.2.1.15 |
nnfrPvcDlciForSwitchingData Link Connection Identifier of the PVC. The
value for this variable ranges from 16 to 991.
frPvcBundleNameForSwitching should be set with
frPvcDlciForSwitching as an atomic set.rw Integer32 .1.3.6.1.4.1.562.73.1.1.1.16.2.1.16 |
nnfrPvcBundleNameForSwitchingThe name of the bundle configured for Switching.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.73.1.1.1.16.2.1.17 |
nnfrPvcRowStatusTo create a row set row status to a value
CreateAndGo(4), indexed by bundle Id and the
desired dlci number.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.73.1.1.1.16.2.1.18 |
nnfrStatsTableThe statistics objects for a frame-relay interface. SEQUENCE OF NnFrStatsTableEntry .1.3.6.1.4.1.562.73.1.1.1.16.3 |
nnfrStatsTableEntryAn entry in the frStatsTable. NnFrStatsTableEntry .1.3.6.1.4.1.562.73.1.1.1.16.3.1 |
nnfrStatsFramesRxNumbers of frames received.ro Counter32 .1.3.6.1.4.1.562.73.1.1.1.16.3.1.1 |
nnfrStatsInvFramesRxNumber of invalid frames receivedro Counter32 .1.3.6.1.4.1.562.73.1.1.1.16.3.1.2 |
nnfrStatsFECNsRxNumber of frames received with FECN bit onro Counter32 .1.3.6.1.4.1.562.73.1.1.1.16.3.1.3 |
nnfrStatsBECNsRxNumber of frames received with BECN bit on.ro Counter32 .1.3.6.1.4.1.562.73.1.1.1.16.3.1.4 |
nnfrStatsShortFramesRxNumber of short frames received.ro Counter32 .1.3.6.1.4.1.562.73.1.1.1.16.3.1.5 |
nnfrStatsLongFramesRxNumber of long frames received.ro Counter32 .1.3.6.1.4.1.562.73.1.1.1.16.3.1.6 |
nnfrStatsInvDLCIsRxNumber of frames with invalid dlci receivedro Counter32 .1.3.6.1.4.1.562.73.1.1.1.16.3.1.7 |
nnfrStatsUnknownDLCIsRxNumber of frames with unknown dlci receivedro Counter32 .1.3.6.1.4.1.562.73.1.1.1.16.3.1.8 |
nnfrStatsFramesTxNumber of frames transmitted.ro Counter32 .1.3.6.1.4.1.562.73.1.1.1.16.3.1.9 |
nnfrPvcStatsTableFR PVC Statistics Table SEQUENCE OF NnFrPvcStatsTableEntry .1.3.6.1.4.1.562.73.1.1.1.16.4 |
nnfrPvcStatsTableEntryAn entry in the FrPvcStats Table NnFrPvcStatsTableEntry .1.3.6.1.4.1.562.73.1.1.1.16.4.1 |
nnfrPvcStatsBytesRxLastBootOrClearNumber of bytes received on a pvc since
boot or last statistics clear.ro Counter32 .1.3.6.1.4.1.562.73.1.1.1.16.4.1.1 |
nnfrPvcStatsBytesTxLastBootOrClearNumber of bytes transmitted on a pvc since
boot or last statistics clear.ro Counter32 .1.3.6.1.4.1.562.73.1.1.1.16.4.1.2 |
nnfrPvcStatsPktsRxLastBootOrClearNumber of packets received since boot
or last statistics clear.ro Counter32 .1.3.6.1.4.1.562.73.1.1.1.16.4.1.3 |
nnfrPvcStatsPktsTxLastBootOrClearNumber of packets transmitted since boot
or last statistics clear.ro Counter32 .1.3.6.1.4.1.562.73.1.1.1.16.4.1.4 |
nnfrPvcStatsErrPktsRxLastBootOrClearNumber of errored packets received since
boot or last statistics clear.ro Counter32 .1.3.6.1.4.1.562.73.1.1.1.16.4.1.5 |
nnfrPvcStatsUpDownStatesLastBootOrClearNumber of times state(up or down) of
the pvc changed in since boot or last
statistics clear.ro Counter32 .1.3.6.1.4.1.562.73.1.1.1.16.4.1.6 |
nnfrPvcStatsBytesRxLastFiveMinsNumber of bytes received in the last
five minutes.ro Counter32 .1.3.6.1.4.1.562.73.1.1.1.16.4.1.7 |
nnfrPvcStatsBytesTxLastFiveMinsNumber of bytes transmitted in the last
five minutes.ro Counter32 .1.3.6.1.4.1.562.73.1.1.1.16.4.1.8 |
nnfrPvcStatsPktsRxLastFiveMinsNumber of packets received in the last
five minutes.ro Counter32 .1.3.6.1.4.1.562.73.1.1.1.16.4.1.9 |
nnfrPvcStatsPktsTxLastFiveMinsNumber of packets transmitted in the last
five minutes.ro Counter32 .1.3.6.1.4.1.562.73.1.1.1.16.4.1.10 |
nnfrPvcStatsErrPktsRxLastFiveMinsNumber of errored packets received in the
last five minutes.ro Counter32 .1.3.6.1.4.1.562.73.1.1.1.16.4.1.11 |
nnfrPvcStatsUpDownStatesLastFiveMinsNumber of times state(up or down) of
the pvc changed in the last five
minutes.ro Counter32 .1.3.6.1.4.1.562.73.1.1.1.16.4.1.12 |
nnfrAvcTableEnd-to-End MFR avc parameters are defined
in this table. SEQUENCE OF NnFrAvcTableEntry .1.3.6.1.4.1.562.73.1.1.1.16.5 |
nnfrAvcTableEntryavc parameter entries are listed in this
table. NnFrAvcTableEntry .1.3.6.1.4.1.562.73.1.1.1.16.5.1 |
nnfrAvcIdfrAvcId is the identifier of an avc. To
configure an avc, this parameter must be
used as the index. This is assigned internally
by the system. Whenever a row creation
needs to occur in the avcTable, the
frAvcId is entered as 65535. Integer32 .1.3.6.1.4.1.562.73.1.1.1.16.5.1.1 |
nnfrAvcDlciData Link Connection Identifier of the avc. The value
ranges from 16 to 1022. This number is unique across
all the avcs created. Once set during creation,
it can't be changed.rw Integer32 .1.3.6.1.4.1.562.73.1.1.1.16.5.1.2 |
nnfrAvcNameName of the avc. To configure an avc,
this parameter must be set. That is, a
descriptive name should be given to an avc.
The maximum length of an avc name is 8
characters. This parameter is set once during
the creation of an avc. an avc can not be
renamed.rw DisplayString .1.3.6.1.4.1.562.73.1.1.1.16.5.1.3 |
nnfrAvcIpAddrThe avc's source IP address. This is one
of the parameters required to set up IP
multiplexing for an avc. Also the parameters
avcIpAddr and avcSubnetMask have to be set
together during the same request. To unconfigure
the IP address, a set operation is performed with
the value 0.0.0.0rw IpAddress .1.3.6.1.4.1.562.73.1.1.1.16.5.1.4 |
nnfrAvcIpSubnetMaskThis parameter represents the source subnet
mask address. This is one of the parameters
required to set up IP multiplexing for a
avc. This parameter is set along with the
avcIpAddr parameter during the same
request.rw IpAddress .1.3.6.1.4.1.562.73.1.1.1.16.5.1.5 |
nnfrAvcRemoteIpAddrRemote IP address to be mapped for the avc. If configured,
the arp table is updated with this static entry and
inverse arp request packets are no longer sent for this
interface.To unconfigure this parameter, a set operation
is performed with the value 0.0.0.0 .rw IpAddress .1.3.6.1.4.1.562.73.1.1.1.16.5.1.6 |
nnfrAvcClassclassA
classB
classC
classD
classE
In the case of classC/D/E, frAvcClassThreshold should be
configured along with avcClass in an atomic set operation.rw Enumeration .1.3.6.1.4.1.562.73.1.1.1.16.5.1.7 |
nnfrAvcClassThresholdThreshold - minimum number of links required to
activate bundle, for the avcClass 'classC'. For
'classD' or 'classE', the value will be in bits per second.
For 'classA' and 'classB', this value will hold no
significance.rw Integer32 .1.3.6.1.4.1.562.73.1.1.1.16.5.1.8 |
nnfrAvcFragmentSizeThe frame size for multi-link frame relay End-to-End avc in
bytes. This value defines the maximum size of any fragment
that can be transmitted on any cvc. Frames larger than this
size must be fragmented.rw Integer32 .1.3.6.1.4.1.562.73.1.1.1.16.5.1.9 |
nnfrAvcSegThresholdSegment threshold packet size in bytes. This value defines
the minimum size of any fragment that can be transmitted on
any cvc. Frames smaller than this size must not be fragmented.rw Integer32 .1.3.6.1.4.1.562.73.1.1.1.16.5.1.10 |
nnfrAvcSequencemultilink frame relay sequence number length (short = 12 bits ; long =
24 bits.24 bit sequence space increases MFR header by 2 more bytes, but
in those situations where the differential delay is high ( > 50 ms ),
larger sequence numbers help reduce packet drops that can happen when
short sequence numbers complete a cycle quickly.rw Enumeration .1.3.6.1.4.1.562.73.1.1.1.16.5.1.11 |
nnfrAvcDiffDelayDifferential delay in milli seconds. This variable
can be set only when the AVC is in Enhanced FRF.15
mode. This value indicates the maximum tolerable differential
delay between any two CVCs. Any CVC whose diff. delay value
exceeds this configured value will be brought down from active
data transfer until it's diff. delay values recover.
Possible Values: 0 and 10ms to 128ms.Setting the
value of 0 will disable diff. delay related CVC bring down feature.rw Integer32 .1.3.6.1.4.1.562.73.1.1.1.16.5.1.12 |
nnfrAvcEnhancedModeEnhanced FRF.15 mode is a modification of the standard FRF.15 to
improve the end to end CVC status integrity and to calculate and act on
differential delay build up. By default, the AVC is created in Standard
FRF.15 mode.rw Enumeration .1.3.6.1.4.1.562.73.1.1.1.16.5.1.13 |
nnfrAvcNoOfCvcsIndicates the number of links configured in
the avc.ro Integer32 .1.3.6.1.4.1.562.73.1.1.1.16.5.1.14 |
nnfrAvcTotalBwIndicates the total bandwidth for this avc.
The avc bandwidth is the aggregated band-
widths of all the links assigned to a
particular avc.ro Integer32 UNITS "kbps" .1.3.6.1.4.1.562.73.1.1.1.16.5.1.15 |
nnfrAvcEnableEnables the AVC. By default AVC is enabled.
Writing one(1) on this enables AVC, zero(0)
disables it.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.562.73.1.1.1.16.5.1.16 |
nnfrAvcRowStatusfrAvcRowStatus is used to add/delete a row
in the table. Adding or deleting a row
corresponds to creating an avc or deleting
an avc. In order to add a row to the avc
table, a set on this parameter should be done
with the value 4 (createAndGo) and
frAvcId index to be used is 65535.
A request to create a row can be
completed successfully only if a set on the
avcRowStatus(4), frAvcName and frAvcDlci
come in the same request. To delete a row
this parameter has to be set with the value 6
(destroy).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.73.1.1.1.16.5.1.17 |
nnfrCvcTableEnd-to-End MFR cvc parameters are defined
in this table. SEQUENCE OF NnFrCvcTableEntry .1.3.6.1.4.1.562.73.1.1.1.16.6 |
nnfrCvcTableEntrycvc parameter entries are listed in this
table. NnFrCvcTableEntry .1.3.6.1.4.1.562.73.1.1.1.16.6.1 |
nnfrCvcBundleNameThe name of the bundle of the CVC which needs to be added
to the avc. This parameter is used for display only.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.562.73.1.1.1.16.6.1.1 |
nnfrCvcEnableEnables/disables the CVC. By default CVC is enabled.
Writing one(1) on this enables CVC, zero(0)
disables it.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.562.73.1.1.1.16.6.1.2 |
nnfrCvcRowStatusfrCvcRowStatus is used to add/delete a row
in the table. Adding or deleting a row
corresponds to adding or removing a CVC from an AVC.
Adding a new row will require to index by the frAvcId,bundleId
and frPvcDlci. Use proper index values and set RowStatus to
CreateAndGo (4) to create a new row. To destroy, use value
Destroy (6).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.73.1.1.1.16.6.1.3 |
nnfrAvcStatsTableThe statistics objects for a frame-relay interface. SEQUENCE OF NnAvcStatsTableEntry .1.3.6.1.4.1.562.73.1.1.1.16.7 |
nnfrAvcStatsTableEntryAn entry in the frAvcStatsTable. NnAvcStatsTableEntry .1.3.6.1.4.1.562.73.1.1.1.16.7.1 |
nnfrAvcStatsBytesRxLastBootOrClearNumber of bytes received on an avc since
boot or last statistics clear.ro Counter32 .1.3.6.1.4.1.562.73.1.1.1.16.7.1.1 |
nnfrAvcStatsBytesTxLastBootOrClearNumber of bytes transmitted on an avc since
boot or last statistics clear.ro Counter32 .1.3.6.1.4.1.562.73.1.1.1.16.7.1.2 |
nnfrAvcStatsPktsRxLastBootOrClearNumber of packets received since boot
or last statistics clear.ro Counter32 .1.3.6.1.4.1.562.73.1.1.1.16.7.1.3 |
nnfrAvcStatsPktsTxLastBootOrClearNumber of packets transmitted since boot
or last statistics clear.ro Counter32 .1.3.6.1.4.1.562.73.1.1.1.16.7.1.4 |
nnfrAvcStatsErrPktsRxLastBootOrClearNumber of errored packets received since
boot or last statistics clear.ro Counter32 .1.3.6.1.4.1.562.73.1.1.1.16.7.1.5 |
nnfrAvcStatsUpDownStatesLastBootOrClearNumber of times state(up or down) of
the avc changed in since boot or last
statistics clear.ro Counter32 .1.3.6.1.4.1.562.73.1.1.1.16.7.1.6 |
nnfrAvcStatsBytesRxLastFiveMinsNumber of bytes received in the last
five minutes.ro Counter32 .1.3.6.1.4.1.562.73.1.1.1.16.7.1.7 |
nnfrAvcStatsBytesTxLastFiveMinsNumber of bytes transmitted in the last
five minutes.ro Counter32 .1.3.6.1.4.1.562.73.1.1.1.16.7.1.8 |
nnfrAvcStatsPktsRxLastFiveMinsNumber of packets received in the last
five minutes.ro Counter32 .1.3.6.1.4.1.562.73.1.1.1.16.7.1.9 |
nnfrAvcStatsPktsTxLastFiveMinsNumber of packets transmitted in the last
five minutes.ro Counter32 .1.3.6.1.4.1.562.73.1.1.1.16.7.1.10 |
nnfrAvcStatsErrPktsRxLastFiveMinsNumber of errored packets received in the
last five minutes.ro Counter32 .1.3.6.1.4.1.562.73.1.1.1.16.7.1.11 |
nnfrAvcStatsUpDownStatesLastFiveMinsNumber of times state(up or down) of
the avc changed in the last five
minutes.ro Counter32 .1.3.6.1.4.1.562.73.1.1.1.16.7.1.12 |