BUNDLE-MIB
AI MIB Summary
The BUNDLE-MIB defines managed objects for monitoring and configuring logical bundle interfaces, specifically tracking aggregate link states, member interface status, and load-balancing parameters across link aggregation groups.
Bundle MIB for defining bundle parameters
Main OID:
nnbundleMib.1.3.6.1.4.1.562.73.1.1.1.13
87
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
87 total| Object Name |
|---|
nnbundleMibBundle MIB for defining bundle parameters MODULE-IDENTITY .1.3.6.1.4.1.562.73.1.1.1.13 |
nnbundleTableBundle management related parameters are defined in this table. SEQUENCE OF NnBundleTableEntry .1.3.6.1.4.1.562.73.1.1.1.13.1 |
nnbundleTableEntryBundle parameter entries are listed in this table. NnBundleTableEntry .1.3.6.1.4.1.562.73.1.1.1.13.1.1 |
nnbundleIdbundleId is the identifier of a bundle. To configure a bundle, this parameter must be used as the index. This is assigned internally by the system. Whenever a row creation needs to occur in the bundleTable, the bundleId is entered as 65535. Integer32 .1.3.6.1.4.1.562.73.1.1.1.13.1.1.1 |
nnbundleNameName of the bundle. To configure a bundle, this parameter must be set. That is, a descriptive name should be given to a bundle. The maximum length of a bundle name is 8 characters. This parameter is set once during the creation of a bundle. A bundle can not be renamed.rw DisplayString .1.3.6.1.4.1.562.73.1.1.1.13.1.1.2 |
nnbundleContactName of the person who can be contacted for information about the bundle. The maximum length for this parameter is 15 characters. This parameter can be set after the bundle is named and before the links are assigned.rw DisplayString .1.3.6.1.4.1.562.73.1.1.1.13.1.1.3 |
nnbundleDescrBrief description of the bundle. The maximum length of this parameter is 25 characters. This parameter can be set after the bundle is named and before the links are assigned.rw DisplayString .1.3.6.1.4.1.562.73.1.1.1.13.1.1.4 |
nnbundleEncapsulationSpecifies the type of protocol encapsulation for the bundle. To configure protocol-specific parameters for a bundle, the bundle must first be encapsulated with that protocol. To unconfigure the encapsulation type, this variable should be set to noEncap.rw Enumeration .1.3.6.1.4.1.562.73.1.1.1.13.1.1.5 |
nnbundleDropEsThe length of time in seconds that the error condition Errored Seconds exists before a link is dropped. This parameter can be configured only for multilink bundles and after the bundle is encapsulated.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.562.73.1.1.1.13.1.1.6 |
nnbundleDropSesThe length of time in seconds that the error condition Severely Errored Seconds exists before a link is dropped. This parameter can be configured only for multilink bundles and after the bundle is encapsulated.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.562.73.1.1.1.13.1.1.7 |
nnbundleDropUasThe length of time in seconds that the error condition Unavailable Seconds exists before a link is dropped. This parameter can be configured only for multilink bundles and after the bundle is encapsulated.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.562.73.1.1.1.13.1.1.8 |
nnbundleDropEevThe length of time in seconds that the error condition ESF Error Events exists before a link is dropped. This parameter can be configured only for multilink bundles and after the bundle is encapsulated.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.562.73.1.1.1.13.1.1.9 |
nnbundleDropBesThe length of time in seconds that the error condition Bursty Errored Seconds (Applicable only for T1 links) exists before a link is dropped. This parameter can be configured only for multilink bundles and after the bundle is encapsulated.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.562.73.1.1.1.13.1.1.10 |
nnbundleDropBbeThe length of time in seconds that the error condition Threshold for Background Blocked Errors (Applicable only for E1 links) exists before a link is dropped. This parameter can be configured only for multilink bundles and after the bundle is encapsulated.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.562.73.1.1.1.13.1.1.11 |
nnbundleDropLofcThe length of time in seconds that the error condition Loss Of Frame Count exists before a link is dropped. This parameter can be configured only for multilink bundles and after the bundle is encapsulated.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.562.73.1.1.1.13.1.1.12 |
nnbundleDropBpvThe length of time in seconds that the error condition BiPolar Violation exists before a link is dropped. This parameter can be configured only for multilink bundles and after the bundle is encapsulated.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.562.73.1.1.1.13.1.1.13 |
nnbundleDropCssThe length of time in seconds that the error condition Controlled Slip Second exists before a link is dropped. This parameter can be configured only for multilink bundles and after the bundle is encapsulated.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.562.73.1.1.1.13.1.1.14 |
nnbundleDropOofThe length of time in seconds that the error condition Out Of Frame exists before a link is dropped. This parameter can be configured only for multilink bundles and after the bundle is encapsulated.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.562.73.1.1.1.13.1.1.15 |
nnbundleDropCrcThe length of time in seconds that the error condition Cyclic Redundancy Check exists before a link is dropped. This parameter can be configured only for multilink bundles and after the bundle is encapsulated.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.562.73.1.1.1.13.1.1.16 |
nnbundleIpAddrThe bundle's source IP address. This is one of the parameters required to set up IP multiplexing for a bundle. This parameter can be configured only when the bundle is encapsulated. Also the parameters bundleIpAddr and bundleSubnetMask have to be set together during the same request. To unconfigure the IP address, a set operation is performed with the value 0.0.0.0rw IpAddress .1.3.6.1.4.1.562.73.1.1.1.13.1.1.17 |
nnbundleSubnetMaskThis parameter represents the source subnet mask address. This is one of the parameters required to set up IP multiplexing for a bundle. This parameter is set along with the bundleIpAddr parameter during the same request.rw IpAddress .1.3.6.1.4.1.562.73.1.1.1.13.1.1.18 |
nnbundleSrcForwardingAddrPrimaryThe bundle's destination IP address. This is one of the parameters required to set up IP multiplexing for a bundle. This parameter can be configured when the bundle has been configured for IP multiplexing. To unconfigure the source forwarding address, a set operation is performed with the value 0.0.0.0. This is the primary source forwarding addressrw IpAddress .1.3.6.1.4.1.562.73.1.1.1.13.1.1.19 |
nnbundleSrcForwardingAddrSecondaryThe bundle's secondary or backup destination address. This address will be used only if the primary address uses an ethernet interface and failover is enabled on that interface and the interface goes down. The secondary source forwarding address is an optional parameter, it should be a gateway on the alternate ethernet This parameter is set along with the primary source forwarding address parameter. To unconfigure this parameter a set operation is performed with the value 0.0.0.0 for the primary address, or a primary address is set with no secondary, or both primary and secondary are set to 0.0.0.0rw IpAddress .1.3.6.1.4.1.562.73.1.1.1.13.1.1.20 |
nnbundleRestoreMethodbundleRestoreMethod defines how a dropped link of a multilink bundle will be restored. It can be done either manually or automatically. If the restore mode is automatic, the parameter bundleLinkRestoralTime should be set (in seconds) during the same request.rw Enumeration .1.3.6.1.4.1.562.73.1.1.1.13.1.1.21 |
nnbundleLinkRestoralTimeError-free time interval (in seconds) that must pass before a link is automatically restored. This parameter can be set when the bundleRestoreMethod is automatic.rw Integer32 UNITS "seconds" .1.3.6.1.4.1.562.73.1.1.1.13.1.1.22 |
nnbundleStatusbundleStatus shutdowns the bundle. Although the default is 'enable,' the bundle remains disabled until all necessary parameters are presentrw Enumeration .1.3.6.1.4.1.562.73.1.1.1.13.1.1.23 |
nnbundleLinkRestorebundleLinkRestore specifies the links to be restored manually. This parameter is configured when the value of bundleRestoreMethod is manual. The user needs to specify the link/s to be restored. LSB in the OCTET STRING represents T1 Number 1. For example, to restore links 1-4 the value should be set to 000Frw OCTET STRING .1.3.6.1.4.1.562.73.1.1.1.13.1.1.24 |
nnbundleNoOfLinksIndicates the number of links configured in the bundle.ro Integer32 .1.3.6.1.4.1.562.73.1.1.1.13.1.1.25 |
nnbundleTotalBwIndicates the total bandwidth for this bundle. The bundle bandwidth is the aggregated band- widths of all the links assigned to a particular bundle.ro Integer32 UNITS "kbps" .1.3.6.1.4.1.562.73.1.1.1.13.1.1.26 |
nnbundleRowStatusbundleRowStatus is used to add/delete a row in the table. Adding or deleting a row corresponds to creating a bundle or deleting a bundle. In order to add a row to the bundle table, a set on this parameter should be done with the value 4 (createAndGo) and bundleId parameter set with the value of 65535. A request to create a row can be completed successfully only if a set on the bundleRowStatus and a set on the bundleName come in the same request. To delete a row this parameter has to be set with the value 6 (destroy).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.73.1.1.1.13.1.1.27 |
nnbundleIpUnnumberedName of the bundle. To configure unnumbered, this parameter must be set. The maximum length of a bundle name is 8 characters.rw DisplayString .1.3.6.1.4.1.562.73.1.1.1.13.1.1.28 |
nnbundleIpMulticastSpecifies the Ip multicast operation.rw Enumeration .1.3.6.1.4.1.562.73.1.1.1.13.1.1.29 |
nnbundleDirectedBcastEnable/disable forwarding of directed broadcasts on this interface.rw Enumeration .1.3.6.1.4.1.562.73.1.1.1.13.1.1.30 |
nnbundleIcmpUnreachableEnable/disable ICMP destination unreachable messages on this interfacerw Enumeration .1.3.6.1.4.1.562.73.1.1.1.13.1.1.31 |
nnbundleIcmpRedirectEnable/disable ICMP redirect messages on this on this interfacerw Enumeration .1.3.6.1.4.1.562.73.1.1.1.13.1.1.32 |
nnbundleClearCountersPerform a clearing of the counters operationrw Integer32 .1.3.6.1.4.1.562.73.1.1.1.13.1.1.33 |
nnbundleTrackHoldDownTimerIndicates the tracking hold down timer.rw INTEGER .1.3.6.1.4.1.562.73.1.1.1.13.1.1.34 |
nnbundleDropPacketsThe number of packets dropped by a WAN interface when the agent encounters packet drops due to lack of buffer availability for transmission etc. Also, packets may be dropped for various reasons like Buffer over flow, packet too long, CRC errors, invalid packet length, system errors etc. This list is only a subset of the numerous reasons for the packets that can be dropped by the agent per interfacero Counter32 .1.3.6.1.4.1.562.73.1.1.1.13.1.1.35 |
nnbundleLinkTableAll the parameters related to the assigned links of a bundle are defined in bundleLinkTable. A row in this table can be created when a bundle with the corresponding bundleId already exists in the bundleTable. SEQUENCE OF NnBundleLinkEntry .1.3.6.1.4.1.562.73.1.1.1.13.2 |
nnbundleLinkEntryLink parameters that relate to a given bundle are specified in this table. NnBundleLinkEntry .1.3.6.1.4.1.562.73.1.1.1.13.2.1 |
nnbundleLinkT1NumbundleLinkT1Num is the number of the T1 link being added to a specific bundle. For example, to assign link number 4, the value of this parameter should be set to 4. However, the design of SNMP's link creation is different from that of the system CLI. In SNMP, only one link can be created at a time whereas in the system CLI, multiple links can be configured in a single request. This parameter is mandatory for row creation in the interfaces with CT3 and T1 link types . Integer32 .1.3.6.1.4.1.562.73.1.1.1.13.2.1.1 |
nnbundleLinkTimeSlotsbundleLinkTimeSlots indicates the DS0 channels in a fractional T1 link. The LSB in the OCTET STRING represents DS0 channel number 1. For example, to assign DS0 channels 1-4, the value of this parameter should be set to 000Frw OCTET STRING .1.3.6.1.4.1.562.73.1.1.1.13.2.1.2 |
nnbundleLinkTypebundleLinkType specifies the interface type (i.e.,CT3,T1,T3,HSSI,V35,X21,S530,S530A,S449,S232 etc.,) of the link being assigned to the bundle. This is a mandatory parameter for Row creation in the bundleLinkTable.rw Enumeration .1.3.6.1.4.1.562.73.1.1.1.13.2.1.3 |
nnbundleLinkSpeedThe bundleLinkSpeed specifies the transmission speed of all DS0 channels in a bundle.rw Enumeration .1.3.6.1.4.1.562.73.1.1.1.13.2.1.4 |
nnbundleLinkInvertedDataSetting bundleLinkInvertedData parameter to true will have the system invert data on all DS0 channels before transmission. Data inversion is used only for HDLC-encapsulated bundles.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.562.73.1.1.1.13.2.1.5 |
nnbundleLinkPhysIfNumbundleLinkPhysIfNum specifies the interface number of the interface type such as CT3, HSSI, T3 on which this link is being created. This variable holds significance only for link types CT3, HSSI and T3. It is a mandatory variable for row creation for link types CT3, HSSI, and T3.rw Integer32 .1.3.6.1.4.1.562.73.1.1.1.13.2.1.6 |
nnbundleLinkDiffDelaybundleLinkDiffDelay specifies the maximum differential delay allowed on the links in a multilink bundle. If the packet delay on any link exceeds the differential delay set for a bundle, that link is dropped from the bundle.ro Integer32 UNITS "milli-seconds" .1.3.6.1.4.1.562.73.1.1.1.13.2.1.7 |
nnbundleLinkBwbundleLinkBw indicates the bandwidth of the link. The bandwidth of an individual link depends upon its configuration. For example, in a link of type T1, its bandwidth will depend upon whether the link is a full T1 or a fractional T1 consisting of 24 DS0 timeslots.ro Integer32 UNITS "kbps" .1.3.6.1.4.1.562.73.1.1.1.13.2.1.8 |
nnbundleLinkStatusbundleLinkStatus indicates whether a particular link in a bundle is up or down. The link can go down due to various reasons such as differential delay, a broken link, or negotiation problems at the far end.ro Enumeration .1.3.6.1.4.1.562.73.1.1.1.13.2.1.9 |
nnbundleLinkRowStatusbundleLinkRowStatus is used to add or delete a row in the table. To create a row, this parameter is set to value 4(createAndGo). To delete a row, this parameter is set to a value 6(destroy).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.73.1.1.1.13.2.1.10 |
nnbundleTrackTableAll the parameters related to bundle tracking are includede in BundleTrackTable. SEQUENCE OF NnBundleTrackEntry .1.3.6.1.4.1.562.73.1.1.1.13.3 |
nnbundleTrackEntryBundle Track parameters that relate to a given bundle are specified in this table. NnBundleTrackEntry .1.3.6.1.4.1.562.73.1.1.1.13.3.1 |
nntrackIntfIdtrackIntfId is the identifier of the bundle being tracked. Integer32 .1.3.6.1.4.1.562.73.1.1.1.13.3.1.1 |
nntrackIntfNameName of the bundle being tracked.rw DisplayString .1.3.6.1.4.1.562.73.1.1.1.13.3.1.2 |
nntrackIntfStatusbundleStatus displays the status of the bundle being tracked.ro Enumeration .1.3.6.1.4.1.562.73.1.1.1.13.3.1.3 |
nntrackIntfRowStatusUsed to configure or delete a tracking interface. To configure a interface, set the value of this object to createAndGo. To delete a interface, set the value of this object to destroy.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.73.1.1.1.13.3.1.4 |
nnloopbackIfTableA list of Loopback Interface table entries for this entity. SEQUENCE OF NnLoopbackIfTableEntry .1.3.6.1.4.1.562.73.1.1.1.13.4 |
nnloopbackIfTableEntryLoopback Interface parameter entries are listed in this table. NnLoopbackIfTableEntry .1.3.6.1.4.1.562.73.1.1.1.13.4.1 |
nnloopbackIfIdloopbackIfId is the identifier of a loopback Interface. To configure a loopback, this parameter must be used as the index. This is assigned internally by the system. Whenever a row creation needs to occur in the loopbackIfTable, the loopbackIfId is entered as 65535. Integer32 .1.3.6.1.4.1.562.73.1.1.1.13.4.1.1 |
nnloopbackIfNameName of the loopback If. To configure a loopback Interface,this parameter must be set. That is, a descriptive name should be given to a loopback inteface. The maximum length of a name is 8 characters. This parameter is set once during the creation of a loopback If. A loopback can not be renamed.rw DisplayString .1.3.6.1.4.1.562.73.1.1.1.13.4.1.2 |
nnloopbackIfIpAddrThe loopback's source IP address. This is one of the parameters required to set up loopback interface. The parameters loopbackIfIpAddr and loopbackIfSubnetMask have to be set together during the same request. To unconfigure the IP address, a set operation is performed with the value 0.0.0.0rw IpAddress .1.3.6.1.4.1.562.73.1.1.1.13.4.1.3 |
nnloopbackIfSubnetMaskThis parameter represents the source subnet mask address. This is one of the parameters required to set up loopback interface. This parameter is set along with the loopbackIfIpAddr parameter during the same request.rw IpAddress .1.3.6.1.4.1.562.73.1.1.1.13.4.1.4 |
nnloopbackIfStatusloopbackIfStatus shows the current status of the loopback interface.ro Enumeration .1.3.6.1.4.1.562.73.1.1.1.13.4.1.5 |
nnloopbackIfRowStatusloopbackIfRowStatus is used to add/delete a row In the table. Adding or deleting a row corresponds to creating a loopback or deleting a loopback. In order to add a row to the loopback table, a set on this parameter should be done with the value 4 (createAndGo) and loopbackIfId parameter set with the value of 65535. A request to create a row can be completed successfully only if a set on the loopbackIfRowStatus and a set on the loopbackIfName come in the same request. To delete a row this parameter has to be set with the value 6 (destroy).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.562.73.1.1.1.13.4.1.6 |
nnbundleTraps OBJECT IDENTIFIER .1.3.6.1.4.1.562.73.1.1.1.13.5 |
nnbundleNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.562.73.1.1.1.13.5.0 |
nnbundleDownTrapTrap being generated when a bundle goes down. NOTIFICATION-TYPE .1.3.6.1.4.1.562.73.1.1.1.13.5.0.1 |
nnbundleUpTrapTrap being generated when a bundle comes up. NOTIFICATION-TYPE .1.3.6.1.4.1.562.73.1.1.1.13.5.0.2 |
nnlinkDownTrapTrap being generated when a link from a bundle goes down. NOTIFICATION-TYPE .1.3.6.1.4.1.562.73.1.1.1.13.5.0.3 |
nnlinkUpTrapTrap being generated when a link whihin a bundle comes up. NOTIFICATION-TYPE .1.3.6.1.4.1.562.73.1.1.1.13.5.0.4 |
nnbundleTrapVariables OBJECT IDENTIFIER .1.3.6.1.4.1.562.73.1.1.1.13.5.1 |
nnbundleNameStrName of the bundle going UP/DOWN.ro DisplayString .1.3.6.1.4.1.562.73.1.1.1.13.5.1.1 |
nnbundleDownCauseReason for the bundle going down admin_delete - bundle has been deleted by administrator, admin_down - bundle has been disabled administratively, l1-failure - Layer 1 failures (physical links), including physical alarms, errors,etc. If a bundle is a multilink bundle, then the bundle will go down if all the inks go down. In case of MFR bundles, bundles behave according to the bandwidth class settings. l2-failure - Layer 2 related failures: LCP for PPP and LMI for FR bundles. bcp-negotiation-fail - BCP negotiation failures on PPP bundles. l3-failure - Layer 3 related failures. NCP for PPP. Incase of FR bundles, the layer 3 negotiation failures will not bring the bundle down. bundle-track-down - Bundle is disabled by bundle tracking,ro Enumeration .1.3.6.1.4.1.562.73.1.1.1.13.5.1.2 |
nnbundleContactInfoName of the person who can be contacted for information about the bundle.ro DisplayString .1.3.6.1.4.1.562.73.1.1.1.13.5.1.3 |
nnbundleDescrInfoBrief description of the bundle.ro DisplayString .1.3.6.1.4.1.562.73.1.1.1.13.5.1.4 |
nnlinkNumlinkNum is the number of the T1/E1 link.ro DisplayString .1.3.6.1.4.1.562.73.1.1.1.13.5.1.5 |
nnlinkTypelinkType specifies the interface type (i.e., CT3, T1, FT1, T3, E1, FE1, v35 and HSSI) of the link.ro Enumeration .1.3.6.1.4.1.562.73.1.1.1.13.5.1.6 |
nnlinkCt3NumlinkCt3Num specifies the interface number of the CT3/CE3 interface. This variable holds significance only for link type t1-within-ct3 and e1-within-ce3.ro DisplayString .1.3.6.1.4.1.562.73.1.1.1.13.5.1.7 |
nnlinkDownCauseReason for the bundle going down admin-delete - link has been removed/deleted from the bundle by the administrator, admin-down - physical link has been disabled administratively from module configuration commands, e.g. 'no enable t1 1' drop-config - link has been removed from the bundle due to event being triggered by the error threshold configuration for the link. e.g. 'drop es 10' command setting from the bundle configuration commands. l1-failure - Layer 1 failures (physical links), including physical alarms, excessive errors,etc.ro Enumeration .1.3.6.1.4.1.562.73.1.1.1.13.5.1.8 |
nnlinkBundleNameName of the bundle in which the link belongs to.ro DisplayString .1.3.6.1.4.1.562.73.1.1.1.13.5.1.9 |
nnlinkCircuitIdConfigured cuircuit Id of the linkro DisplayString .1.3.6.1.4.1.562.73.1.1.1.13.5.1.10 |
nnlinkContactInfoConfigured contact string of the linkro DisplayString .1.3.6.1.4.1.562.73.1.1.1.13.5.1.11 |
nnlinkNameInfoName of the linkro DisplayString .1.3.6.1.4.1.562.73.1.1.1.13.5.1.12 |
nnlinkDescrInfoBrief description of linkro DisplayString .1.3.6.1.4.1.562.73.1.1.1.13.5.1.13 |
nnenableBundleUpDownNotificationIndicates whether the system produces the BundleDownTrap & BundleUpTrap . The default is yes.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.562.73.1.1.1.13.5.2 |
nnenableLinkUpDownNotificationIndicates whether the system produces the linkDownTrap & linkUpTrap . The default is yes.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.562.73.1.1.1.13.5.3 |
nnbundleNotificationGroupThe BUNDLE MIB Notification Group. Unknown .1.3.6.1.4.1.562.73.1.1.1.13.6 |