FOUNDRY-SN-WIRELESS-GROUP-MIB
AI MIB Summary
The FOUNDRY-SN-WIRELESS-GROUP-MIB facilitates the monitoring and management of Brocade Foundry wireless LAN controller groups, specifically tracking group membership status, configuration synchronization states, and the operational health of associated access points.
Copyright 1996-2010 Brocade Communications Systems, Inc. All rights reserved. This Brocade Communications Systems SNMP Management Information Base Specification embodies Brocade Communications Systems' confidential and proprietary intellectual property. Brocade Communications Systems retains all title and ownership in the Specification, including any revisions.
This Specification is supplied AS IS, and Brocade Communications Systems makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment.
Main OID:
snWireless.1.3.6.1.4.1.6321.1.2.3.2.10.3.23
41
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
41 total| Object Name |
|---|
snWirelessCopyright 1996-2010 Brocade Communications Systems, Inc.
All rights reserved.
This Brocade Communications Systems SNMP Management Information Base Specification
embodies Brocade Communications Systems' confidential and proprietary
intellectual property. Brocade Communications Systems retains all
title and ownership in the Specification, including any revisions.
This Specification is supplied AS IS, and Brocade Communications Systems makes
no warranty, either express or implied, as to the use,
operation, condition, or performance of the specification, and any unintended
consequence it may on the user environment. MODULE-IDENTITY .1.3.6.1.4.1.6321.1.2.3.2.10.3.23 |
wgGroup OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.2.10.3.23.1 |
wgMobilityIdUnique Identifier used to specify the mobility doamin.
Valid range is <1 - 65535>. Use <0> to remove the domain.rw Integer32 .1.3.6.1.4.1.6321.1.2.3.2.10.3.23.1.1 |
wgVpnPTDeletePolicyWrite a valid VPN pass through policy ID to remove the policy.
Return zero when reading this object.rw Integer32 .1.3.6.1.4.1.6321.1.2.3.2.10.3.23.1.2 |
wgIfTableWiFi Interface Table. SEQUENCE OF WgIfEntry .1.3.6.1.4.1.6321.1.2.3.2.10.3.23.2 |
wgIfEntryAn entry of the WiFi Interface Table. WgIfEntry .1.3.6.1.4.1.6321.1.2.3.2.10.3.23.2.1 |
wgIfIndexifIndex value of the switch interface.ro Integer32 .1.3.6.1.4.1.6321.1.2.3.2.10.3.23.2.1.1 |
wgIfWirelessEnableControl wireless function of the switch interface.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.2.10.3.23.2.1.2 |
wgIfPnPLearnNewAPControl the interface to learn new AP.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.2.10.3.23.2.1.3 |
wgIfAutoPortDisableDisable the interface if the interface link status change.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.2.10.3.23.2.1.4 |
wgIfVpnPTPolicyIdTo bind an interface to a VPN pass through policy, write
a valid policy number which is larger than zero. To unbind
an interface to a VPN pass through policy, write a zero.rw Integer32 .1.3.6.1.4.1.6321.1.2.3.2.10.3.23.2.1.5 |
wgIfFullCompRoamingEnableControl full compatibility roaming of an interface.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.2.10.3.23.2.1.6 |
wgRoamingPeerTableRoaming Peer table contains information of peers. SEQUENCE OF WgRoamingPeerEntry .1.3.6.1.4.1.6321.1.2.3.2.10.3.23.3 |
wgRoamingPeerEntryAn entry of the roaming peer table. WgRoamingPeerEntry .1.3.6.1.4.1.6321.1.2.3.2.10.3.23.3.1 |
wgRoamingPeerIpAddressIP Address of the ISRP peer.ro IpAddress .1.3.6.1.4.1.6321.1.2.3.2.10.3.23.3.1.1 |
wgRoamingPeerConnectionStatusShows the state of the ISRP Connection.ro Enumeration .1.3.6.1.4.1.6321.1.2.3.2.10.3.23.3.1.2 |
wgRoamingPeerRowStatusShows the state of the row in the PeerRow Table.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.2.10.3.23.3.1.3 |
wgPnPTableAP Plug and Play Table. SEQUENCE OF WgPnPEntry .1.3.6.1.4.1.6321.1.2.3.2.10.3.23.4 |
wgPnPEntryAn entry of the AP Plug and Play Table. WgPnPEntry .1.3.6.1.4.1.6321.1.2.3.2.10.3.23.4.1 |
wgPnPIfIndexifIndex value of the switch interface.ro Integer32 .1.3.6.1.4.1.6321.1.2.3.2.10.3.23.4.1.1 |
wgPnPMacAddressMAC address of the attached AP.ro MacAddress (FOUNDRY-SN-AGENT-MIB) .1.3.6.1.4.1.6321.1.2.3.2.10.3.23.4.1.2 |
wgPnPIpAddressIP address of the attached AP.rw IpAddress .1.3.6.1.4.1.6321.1.2.3.2.10.3.23.4.1.3 |
wgPnPIpMaskSubnet mask of the attached AP.rw IpAddress .1.3.6.1.4.1.6321.1.2.3.2.10.3.23.4.1.4 |
wgPnPIpDefaultGwDefault gateway of the attached AP.rw IpAddress .1.3.6.1.4.1.6321.1.2.3.2.10.3.23.4.1.5 |
wgPnPStatusAP device status. If the switch diecovered a new AP which
had not been configured, the 'discovered' state will return.
If the AP's IP address, subnet mask and default gateway were
configured to the switch port but the AP with the matching
MAC address had not attached to the switch port, 'configured'
state will return. If the AP's IP address, subnet mask and
default gateway were configured to the switch port and the
AP with the matching MAC address had attached to the switch
port and was operating, 'operational' state will return.ro Enumeration .1.3.6.1.4.1.6321.1.2.3.2.10.3.23.4.1.6 |
wgPnPRowStatusCreate, delete or modify a row of AP Plug and Play Table.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.2.10.3.23.4.1.7 |
wgVpnPTServerTableVPN pass through server table SEQUENCE OF WgVpnPTServerEntry .1.3.6.1.4.1.6321.1.2.3.2.10.3.23.5 |
wgVpnPTServerEntryAn entry of the VPN pass through server table. WgVpnPTServerEntry .1.3.6.1.4.1.6321.1.2.3.2.10.3.23.5.1 |
wgVpnPTServerPolicyIdVPN pass through policy identifier. It must be greater than zero.ro Integer32 .1.3.6.1.4.1.6321.1.2.3.2.10.3.23.5.1.1 |
wgVpnPTServerIpAddressVPN server IP address.ro IpAddress .1.3.6.1.4.1.6321.1.2.3.2.10.3.23.5.1.2 |
wgVpnPTServerRowStatusCreate or delete a row of VPN pass through server table.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.2.10.3.23.5.1.3 |
wgVpnPTFilterTableVPN pass through filter table SEQUENCE OF WgVpnPTFilterEntry .1.3.6.1.4.1.6321.1.2.3.2.10.3.23.6 |
wgVpnPTFilterEntryAn entry of the VPN pass through filter table. WgVpnPTFilterEntry .1.3.6.1.4.1.6321.1.2.3.2.10.3.23.6.1 |
wgVpnPTFilterPolicyIdVPN pass through policy identifier. It must be greater than zero.ro Integer32 .1.3.6.1.4.1.6321.1.2.3.2.10.3.23.6.1.1 |
wgVpnPTFilterProtocolAllow this type of protocol to pass through.ro Enumeration .1.3.6.1.4.1.6321.1.2.3.2.10.3.23.6.1.2 |
wgVpnPTFilterPortAllow this protocol port to pass through.ro Integer32 .1.3.6.1.4.1.6321.1.2.3.2.10.3.23.6.1.3 |
wgVpnPTFilterRowStatusCreate or delete a row of VPN pass through filter table.rw Enumeration .1.3.6.1.4.1.6321.1.2.3.2.10.3.23.6.1.4 |
wgVpnPTPolicyTableVPN pass through policy table SEQUENCE OF WgVpnPTPolicyEntry .1.3.6.1.4.1.6321.1.2.3.2.10.3.23.7 |
wgVpnPTPolicyEntryAn entry of the VPN pass through policy table. WgVpnPTPolicyEntry .1.3.6.1.4.1.6321.1.2.3.2.10.3.23.7.1 |
wgVpnPTPolicyIdVPN pass through policy identifier. It must be greater than zero.ro Integer32 .1.3.6.1.4.1.6321.1.2.3.2.10.3.23.7.1.1 |
wgVpnPTPolicyPortListA list of ports bound to this VPN pass through policy.ro IfIndexList .1.3.6.1.4.1.6321.1.2.3.2.10.3.23.7.1.2 |