FOUNDRY-SN-STACKING-MIB
AI MIB Summary
The FOUNDRY-SN-STACKING-MIB monitors and configures the operational status and topology of Brocade Foundry network switch stacks, tracking critical metrics such as member device states, stack port link integrity, and master election parameters. This module facilitates centralized management of the aggregated switch fabric by exposing stack-specific configuration variables and fault conditions via SNMP.
Management Information for stacking system configuration and operational status.
Copyright 1996-2010 Brocade Communications Systems, Inc. All rights reserved. This Brocade Communications Systems SNMP Management Information Base Specification embodies Brocade Communications Systems' confidential and proprietary intellectual property. Brocade Communications Systems retains all title and ownership in the Specification, including any revisions.
This Specification is supplied AS IS, and Brocade Communications Systems makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment.
Main OID:
snStacking.1.3.6.1.4.1.6321.1.2.3.2.10.3.31
62
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
62 total| Object Name |
|---|
snStackingManagement Information for stacking system
configuration and operational status.
Copyright 1996-2010 Brocade Communications Systems, Inc.
All rights reserved.
This Brocade Communications Systems SNMP Management Information Base Specification
embodies Brocade Communications Systems' confidential and proprietary
intellectual property. Brocade Communications Systems retains all
title and ownership in the Specification, including any revisions.
This Specification is supplied AS IS, and Brocade Communications Systems makes
no warranty, either express or implied, as to the use,
operation, condition, or performance of the specification, and any unintended
consequence it may on the user environment. MODULE-IDENTITY .1.3.6.1.4.1.6321.1.2.3.2.10.3.31 |
snStackingGlobalObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.1 |
snStackingGlobalConfigStateConfigure stack state for stacking feature on the global level.
none: neutral, receive packets only
enable: stacking is enable, send and receive packets
disable: stacking is disable, No send and receive packetsrw Enumeration .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.1.1 |
snStackingGlobalMacAddressManagement MAC address of the stacking system.
This is available to change management MAC address of stack
for administrative purpose. It is strongly recommended that this
command should be used with upmost caution to prevent duplicate
MAC address and must reboot the system to take an effect.
It is mutually exclusive from enabling the persistent MAC timer.
Enter zero MAC address to remove the configured MAC addressrw MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.1.2 |
snStackingGlobalPersistentMacTimerStateConfigure persistent MAC timer state for stacking feature on the global level.
enable: the persistent MAC timer is active and configured. The persistent MAC
timer is set as the default timer (60 minutes)
disable: deactivate the persistent MAC timer. It will stop the use of persistent MAC
address and use new active stack unit's base MAC addressrw Enumeration .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.1.3 |
snStackingGlobalPersistentMacTimerPersistent MAC timer in minutes for the stacking system
Number of minutes to retain original active stack unit's base MAC address in event of
active unit crash or removal. This timer is triggered when new active unit is elected.
When timer expires, new active unit will change stacking MAC to its own base MAC
address and advertise its own base MAC address to management VLAN to update the
ARP table of peers. If you decide to use new active unit's MAC address, one must enter
this timer again to reactivate the persistent MAC.
0 - keep it forever.
5 to 6000 - valid value range.
60 - default value.rw Integer32 .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.1.4 |
snStackingGlobalTopologyThe topology of the stacking systemro Enumeration .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.1.5 |
snStackingGlobalModeThe stacking mode of the system.
stackingMode: the system has been installed STK EEPROM, and it is in stacking mode.
nonStackingMode:the system has not been installed STK EEPROM, and it is not in stacking mode.ro Enumeration .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.1.6 |
snStackingGlobalMixedModeThe mixed stacking mode of the system.
mixedStackingMode: the system is in mixed stacking mode (heterogeneous stacking).
classicStackingMode: the system is not in mixed stacking mode (homogeneous stacking).ro Enumeration .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.1.7 |
snStackingTableObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2 |
snStackingConfigUnitTableStacking configuration unit table. SEQUENCE OF SnStackingConfigUnitEntry .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.1 |
snStackingConfigUnitEntryAn entry in the stacking configuration table. SnStackingConfigUnitEntry .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.1.1 |
snStackingConfigUnitIndexThe stacking unit Id Integer32 .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.1.1.1 |
snStackingConfigUnitPriorityThe priority in Active/backup eclection.rw Integer32 .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.1.1.2 |
snStackingConfigUnitConfigStackPortThe IfIndex for the configured stacking port. If no
stacking port is configured, it will be displayed zero
and the first two 10G ports as the default stacking ports.
Enter zero to remove the configured stacking port.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.1.1.3 |
snStackingConfigUnitRowStatusThis object is used to delete row in the
table and control if they are used. The values that
can be written are:
delete(3)...deletes the row
If the row exists, then a SET with value of create(4)
returns error 'wrongValue'. Deleted rows go away immediately.
The following values can be returned on reads:
noSuchName...no such row
other(1).....some other cases
valid(2)....the row exists and is validrw Enumeration .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.1.1.4 |
snStackingConfigUnitTypeA description of the configured/active system type for each unit.ro DisplayString (FOUNDRY-SN-AGENT-MIB) .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.1.1.5 |
snStackingConfigUnitStateA state for each unitro Enumeration .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.1.1.6 |
snStackingConfigUnitStackPort1First stack port for each unit. It returns 0 if stack port does not exist.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.1.1.7 |
snStackingConfigUnitStackPort2Second stack port for each unit. It returns 0 if stack port does not exist.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.1.1.8 |
snStackingConfigUnitConnectPort1First connect port for a peripheral unit in a mixed stacking system. A peripheral
unit can have up to two connect ports that is is conected to. They are suggested
neighbor linking ports. Thus, they could be code units' periport/trunk or peripheral
units' stacking port. It returns 0 if connect port does not exist.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.1.1.9 |
snStackingConfigUnitConnectPort2second connect port for a peripheral unit in a mixed stacking system. A peripheral
unit can have up to two connect ports that is is conected to. They are suggested
neighbor linking ports. Thus, they could be code units' periport/trunk or peripheral
units' stacking port. It returns 0 if connect port does not exist.rw InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.1.1.10 |
snStackingOperUnitTableStacking operation unit table. SEQUENCE OF SnStackingOperUnitEntry .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.2 |
snStackingOperUnitEntryAn entry in the stacking operation table. SnStackingOperUnitEntry .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.2.1 |
snStackingOperUnitIndexThe stacking unit Id Integer32 .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.2.1.1 |
snStackingOperUnitRoleA role for each unitro Enumeration .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.2.1.2 |
snStackingOperUnitMacA MAC address for each unitro MacAddress (SNMPv2-TC) .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.2.1.3 |
snStackingOperUnitPriorityThe priority in Active/backup eclection.ro Integer32 .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.2.1.4 |
snStackingOperUnitStateA state for each unitro Enumeration .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.2.1.5 |
snStackingOperUnitDescriptionDescribes the stacking state for each unit.ro DisplayString .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.2.1.6 |
snStackingOperUnitStackPort1First stack port for each unit. It returns 0 if stack port does not exist.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.2.1.7 |
snStackingOperUnitStackPort1StateThe first stack port state for each unit.ro Enumeration .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.2.1.8 |
snStackingOperUnitStackPort2Second stack port for each unit. It returns 0 if stack port does not exist.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.2.1.9 |
snStackingOperUnitStackPort2StateThe second stack port state for each unit.ro Enumeration .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.2.1.10 |
snStackingOperUnitNeighbor1Stacking neighbor unit (left) number.
If there is no neighbor unit, then it returns 0.ro Integer32 .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.2.1.11 |
snStackingOperUnitNeighbor2Stacking neighbor unit (left) number.
If there is no neighbor unit, then it returns 0.ro Integer32 .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.2.1.12 |
snStackingOperUnitImgVerThe version of the running software imagero DisplayString .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.2.1.13 |
snStackingOperUnitBuildlVerThe version of the running software buildro DisplayString .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.2.1.14 |
snStackingConfigStackTrunkTableStacking configuration stack trunk table. SEQUENCE OF SnStackingConfigStackTrunkEntry .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.3 |
snStackingConfigStackTrunkEntryAn entry in the stacking configuration Stack trunk table. SnStackingConfigStackTrunkEntry .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.3.1 |
snStackingConfigStackTrunkUnitThe stacking unit Id Integer32 .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.3.1.1 |
snStackingConfigStackTrunkPort1The IfIndex for the first (primary) port of the configured stack trunk.
There are two ports per stack trunk. In some case, a physical port may contain
more than one port, e.g. one 40G (1/2/2) for ICX6610 has 4x10G ports.
It returns 0 if the port does not exist. InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.3.1.2 |
snStackingConfigStackTrunkPort2The IfIndex for the second port of the configured stack trunk.
There are two ports per stack trunk. In some case, a physical port may contain
more than one logical port, e.g. one 40G (1/2/2) for ICX6610 has 4x10G ports.
It returns 0 if the port does not exist. InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.3.1.3 |
snStackingConfigStackTrunkRowStatusThis object is used to delete row in the
table and control if they are used. The values that
can be written are:
delete(3)...deletes the row
If the row exists, then a SET with value of create(4)
returns error 'wrongValue'. Deleted rows go away immediately.
The following values can be returned on reads:
noSuchName...no such row
other(1).....some other cases
valid(2)....the row exists and is validrw Enumeration .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.3.1.4 |
snStackingConfigStackTrunkNumPort1Number of logical ports for the first (primary) port of the configured stack trunk.
In some case, a physical port may contain more than one logical port,
e.g. one 40G (1/2/2) for ICX6610 has 4x10G ports. It returns 0 if the port
does not exist.ro Integer32 .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.3.1.5 |
snStackingConfigStackTrunkNumPort2Number of logical ports for the second port of the configured stack trunk.
In some case, a physical port may contain more than one logical port,
e.g. one 40G (1/2/2) for ICX6610 has 4x10G ports. It returns 0 if the port
does not exist.ro Integer32 .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.3.1.6 |
snStackingConfigPeriPortTableStacking configuration peripheral port table. SEQUENCE OF SnStackingConfigPeriPortEntry .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.4 |
snStackingConfigPeriPortEntryAn entry in the stacking configuration peripheral port table. SnStackingConfigPeriPortEntry .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.4.1 |
snStackingConfigPeriPortUnitThe stacking unit Id Integer32 .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.4.1.1 |
snStackingConfigPeriPortPortThe IfIndex for the configured mixed stacking peripheral port.
It is up to eight peripheral ports per unit. InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.4.1.2 |
snStackingConfigPeriPortRowStatusThis object is used to delete row in the
table and control if they are used. The values that
can be written are:
delete(3)...deletes the row
If the row exists, then a SET with value of create(4)
returns error 'wrongValue'. Deleted rows go away immediately.
The following values can be returned on reads:
noSuchName...no such row
other(1).....some other cases
valid(2)....the row exists and is validrw Enumeration .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.4.1.3 |
snStackingConfigPeriTrunkTableStacking configuration peripheral trunk table. SEQUENCE OF SnStackingConfigPeriTrunkEntry .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.5 |
snStackingConfigPeriTrunkEntryAn entry in the stacking configuration peripheral trunk table. SnStackingConfigPeriTrunkEntry .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.5.1 |
snStackingConfigPeriTrunkUnitThe stacking unit Id Integer32 .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.5.1.1 |
snStackingConfigPeriTrunkPort1The IfIndex for the first port of the configured mixed stacking peripheral trunk.
There are two ports per peripheral trunk. It is up to four peripheral trunks per unit. InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.5.1.2 |
snStackingConfigPeriTrunkPort2The IfIndex for the second port of the configured mixed stacking peripheral trunk.
There are two ports per peripheral trunk. It is up to four peripheral trunks per unit. InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.5.1.3 |
snStackingConfigPeriTrunkRowStatusThis object is used to delete row in the
table and control if they are used. The values that
can be written are:
delete(3)...deletes the row
If the row exists, then a SET with value of create(4)
returns error 'wrongValue'. Deleted rows go away immediately.
The following values can be returned on reads:
noSuchName...no such row
other(1).....some other cases
valid(2)....the row exists and is validrw Enumeration .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.5.1.4 |
snStackingNeighborPortTableStacking neighbor port table. SEQUENCE OF SnStackingNeighborPortEntry .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.6 |
snStackingNeighborPortEntryAn entry in the stacking neighborport table. SnStackingNeighborPortEntry .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.6.1 |
snStackingNeighborPortUnitThe stacking unit Id Integer32 .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.6.1.1 |
snStackingNeighborPortStackPortThe IfIndex for the stack port on this unit.
It is up to ten stack ports and peripheral ports per unit. InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.6.1.2 |
snStackingNeighborPortNeighborPortThe IfIndex for the neighbor port of the stack port on this unit.
It returns 0 if neighbor port does not exist for this stack port.ro InterfaceIndexOrZero (IF-MIB) .1.3.6.1.4.1.6321.1.2.3.2.10.3.31.2.6.1.3 |