FOUNDRY-CAR-MIB
AI MIB Summary
FOUNDRY-CAR-MIB provides vendor-specific SNMP management capabilities for Brocade (formerly Foundry) Carrier-Grade Access Routers, specifically monitoring Carrier-Grade NAT (CGN) session states, address translation tables, and resource utilization metrics. This module enables administrators to track dynamic IP address allocation, active user sessions, and translation table overflow conditions within large-scale carrier networks.
Copyright 1996-2010 Brocade Communications Systems, Inc. All rights reserved. This Brocade Communications Systems SNMP Management Information Base Specification embodies Brocade Communications Systems' confidential and proprietary intellectual property. Brocade Communications Systems retains all title and ownership in the Specification, including any revisions.
This Specification is supplied AS IS, and Brocade Communications Systems makes no warranty, either express or implied, as to the use, operation, condition, or performance of the specification, and any unintended consequence it may on the user environment.
Main OID:
snCAR.1.3.6.1.4.1.6321.1.2.3.2.10.3.16
26
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
26 total| Object Name |
|---|
snCARCopyright 1996-2010 Brocade Communications Systems, Inc.
All rights reserved.
This Brocade Communications Systems SNMP Management Information Base Specification
embodies Brocade Communications Systems' confidential and proprietary
intellectual property. Brocade Communications Systems retains all
title and ownership in the Specification, including any revisions.
This Specification is supplied AS IS, and Brocade Communications Systems makes
no warranty, either express or implied, as to the use,
operation, condition, or performance of the specification, and any unintended
consequence it may on the user environment. MODULE-IDENTITY .1.3.6.1.4.1.6321.1.2.3.2.10.3.16 |
snPortCARs OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.2.10.3.16.1 |
snPortCARTableA table of rate limit configuration entries.
Rate Limit is a method of traffic control. It allows a set
of rate limits to be configured and applied to packets flowing
into/out of an interface to regulate network traffic. SEQUENCE OF SnPortCAREntry .1.3.6.1.4.1.6321.1.2.3.2.10.3.16.1.1 |
snPortCAREntryA collection of rate-limit configuration objects on this
interface. SnPortCAREntry .1.3.6.1.4.1.6321.1.2.3.2.10.3.16.1.1.1 |
snPortCARifIndexThe ifIndex value for this rate limit entry.ro InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6321.1.2.3.2.10.3.16.1.1.1.1 |
agRateLimitBUMCounterTableThis table displays
The number of bytes dropped due to BUM rate-limit on the port, based on configured packet type and VLANID
Committed Burst Size(CBS) in bits
Committed Information Rate(CIR) in bits
AlertLowLevelThreshold in bits
AlertHighLevelThreshold in bits
ShutdownTimeout in minutes SEQUENCE OF AgRateLimitBUMCounterEntry .1.3.6.1.4.1.6321.1.2.3.2.10.3.16.1.4 |
agRateLimitBUMCounterEntryAn entry containing the number of bytes dropped due to BUM rate-limit, followed by CBS ,CIR, AlertLowLevelThreshold, AlertHighLevelThreshold in terms of bits, and ShutdownTimeout in minutes AgRateLimitBUMCounterEntry .1.3.6.1.4.1.6321.1.2.3.2.10.3.16.1.4.1 |
agRateLimitBUMCounterIfindexIfindex, a count which uniquely identifies the ports
in the chassis. Ranges from 1 to 2048 InterfaceIndex (IF-MIB) .1.3.6.1.4.1.6321.1.2.3.2.10.3.16.1.4.1.1 |
agRateLimitBUMCounterVLANIDVLANID, a ID which is used to represent the
corresponding VLAN in the chassis. Ranges
from 1 to 4096 Integer32 .1.3.6.1.4.1.6321.1.2.3.2.10.3.16.1.4.1.2 |
agRateLimitBUMCounterPacketTypePacketType, used to represent the type of the packet i.e. B(1) or U(2) or BU(3) or M(4) or BM(5) or UM(6) or BUM(7) U?Unknown-Unicast, B?Broadcast and M?Multicast BUMPacketType .1.3.6.1.4.1.6321.1.2.3.2.10.3.16.1.4.1.3 |
agRateLimitBUMCounterDroppedOctetsA count used to represent the number of bytes dropped due to BUM rate-limit in bytes.ro Counter64 .1.3.6.1.4.1.6321.1.2.3.2.10.3.16.1.4.1.4 |
agRateLimitBUMCounterCBSA count used to represent the Committed Burst Size in bits.ro Counter64 .1.3.6.1.4.1.6321.1.2.3.2.10.3.16.1.4.1.5 |
agRateLimitBUMCounterCIRA count used to represent the Committed Information Rate in bits.ro Counter64 .1.3.6.1.4.1.6321.1.2.3.2.10.3.16.1.4.1.6 |
agRateLimitBUMCounterAlertLowLevelThresholdA count used to represent the configured lower threshold level in bits, to generate the Alert.ro Counter64 .1.3.6.1.4.1.6321.1.2.3.2.10.3.16.1.4.1.7 |
agRateLimitBUMCounterAlertHighLevelThresholdA count used to represent the configured Higher threshold level in bits, to generate the Alert.ro Counter64 .1.3.6.1.4.1.6321.1.2.3.2.10.3.16.1.4.1.8 |
agRateLimitBUMCounterShutdownTimeoutA count used to represent the Timeout value in terms of minutes,
which is the time interval after which the shutdown port will
be enabled.ro Integer32 .1.3.6.1.4.1.6321.1.2.3.2.10.3.16.1.4.1.9 |
snBUMRLNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.6321.1.2.3.2.10.3.16.1.5 |
snTrapBUMratelimitAlertLowThresholdA snTrapBUMratelimitAlertLowThreshold trap signifies that the
ingress packets interms of bits have reached the configured
low level threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.6321.1.2.3.2.10.3.16.1.5.1 |
snTrapBUMratelimitAlertHighThresholdA snTrapBUMratelimitAlertHighThreshold trap signifies that the
ingress packets interms of bits, have reached the configured
high level threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.6321.1.2.3.2.10.3.16.1.5.2 |
snTrapBUMratelimitShutdownLinkDownA snTrapBUMratelimitShutdownLinkDown trap signifies that the
port is shutdown after reaching the configured CIR in bps. NOTIFICATION-TYPE .1.3.6.1.4.1.6321.1.2.3.2.10.3.16.1.5.3 |
snTrapBUMratelimitShutdownLinkUpA snTrapBUMratelimitAlertHighThreshold trap signifies that the
port is UP after the specified shutdown timeout in minutes. NOTIFICATION-TYPE .1.3.6.1.4.1.6321.1.2.3.2.10.3.16.1.5.4 |
snPortCARDirectionThe input or output transmission direction for the
Rate Limit object.
input (0),
output(1)
::= { snPortCAREntry 2 }
snPortCARRowIndex OBJECT-TYPE
SYNTAX INTEGER (1..2147483647)
MAX-ACCESS read-only
STATUS current
DESCRIPTIONro PacketSource .agRateLimitCounterIndexEntry.2 |
agRateLimitCounterIndexACLIDThe corresponding ACL ID to match with the row index of the ratelimit
counter table.ro Integer32 .agRateLimitCounterIndexEntry.3 |
agRateLimitCounterIndexVLANIDThe corresponding VLAN ID to match with the row index of the ratelimit
counter table.ro Integer32 .agRateLimitCounterIndexEntry.4 |
agRateLimitCounterIndexVLANGroupIDThe corresponding VLAN Group ID to match with the row index of the
ratelimit counter table.ro Integer32 .agRateLimitCounterIndexEntry.5 |
agRateLimitCounterIndexMACAddressThe corresponding MAC Address for Source MAC based rate limit to match
with the row index of the ratelimit counter table.ro MacAddress (SNMPv2-TC) .agRateLimitCounterIndexEntry.6 |