FORTINET-CORE-MIB
FORTINET-CORE-MIB provides SNMP access to Fortinet firewall and security appliance core subsystems, enabling the monitoring of critical operational metrics including CPU utilization, memory consumption, interface traffic statistics, session table states, and high-availability cluster synchronization status.
Imported Objects
Objects
39 total| Object Name |
|---|
fortinetMIB module for Fortinet network devices. MODULE-IDENTITY .1.3.6.1.4.1.12356 |
fnCoreMib OBJECT IDENTIFIER .1.3.6.1.4.1.12356.100 |
fnCommon OBJECT IDENTIFIER .1.3.6.1.4.1.12356.100.1 |
fnSystem OBJECT IDENTIFIER .1.3.6.1.4.1.12356.100.1.1 |
fnSysSerialDevice serial number. This is the same serial number as given in the ENTITY-MIB tables for the base entity.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.12356.100.1.1.1 |
fnMgmt OBJECT IDENTIFIER .1.3.6.1.4.1.12356.100.1.2 |
fnMgmtLanguageLanguage used for administration interfacesro FnLanguage .1.3.6.1.4.1.12356.100.1.2.1 |
fnAdmin OBJECT IDENTIFIER .1.3.6.1.4.1.12356.100.1.2.100 |
fnAdminNumberThe number of admin accounts in fnAdminTablero Integer32 .1.3.6.1.4.1.12356.100.1.2.100.1 |
fnAdminTableA table of administrator accounts on the device. This table is intended to be extended with platform specific information. SEQUENCE OF FnAdminEntry .1.3.6.1.4.1.12356.100.1.2.100.2 |
fnAdminEntryAn entry containing information applicable to a particular admin account FnAdminEntry .1.3.6.1.4.1.12356.100.1.2.100.2.1 |
fnAdminIndexAn index uniquely defining an administrator account within the fnAdminTable Integer32 .1.3.6.1.4.1.12356.100.1.2.100.2.1.1 |
fnAdminNameThe user-name of the specified administrator accountro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.12356.100.1.2.100.2.1.2 |
fnAdminAddrTypeThe type of address stored in fnAdminAddr, in compliance with INET-ADDRESS-MIBro InetAddressType (INET-ADDRESS-MIB) .1.3.6.1.4.1.12356.100.1.2.100.2.1.3 |
fnAdminAddrThe address prefix identifying where the administrator account can be used from, typically an IPv4 address. The address type/format is determined by fnAdminAddrType.ro InetAddress (INET-ADDRESS-MIB) .1.3.6.1.4.1.12356.100.1.2.100.2.1.4 |
fnAdminMaskThe address prefix length (or network mask) applied to the fgAdminAddr to determine the subnet or host the administrator can access the device fromro InetAddressPrefixLength (INET-ADDRESS-MIB) .1.3.6.1.4.1.12356.100.1.2.100.2.1.5 |
fnTraps OBJECT IDENTIFIER .1.3.6.1.4.1.12356.100.1.3 |
fnTrapsPrefix OBJECT IDENTIFIER .1.3.6.1.4.1.12356.100.1.3.0 |
fnTrapCpuThresholdIndicates that the CPU usage has exceeded the configured threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.12356.100.1.3.0.101 |
fnTrapMemThresholdIndicates memory usage has exceeded the configured threshold. NOTIFICATION-TYPE .1.3.6.1.4.1.12356.100.1.3.0.102 |
fnTrapLogDiskThresholdLog disk usage has exceeded the configured threshold. Only available on devices with log disks. NOTIFICATION-TYPE .1.3.6.1.4.1.12356.100.1.3.0.103 |
fnTrapTempHighA temperature sensor on the device has exceeded its threshold. Not all devices have thermal sensors. See manual for specifications. NOTIFICATION-TYPE .1.3.6.1.4.1.12356.100.1.3.0.104 |
fnTrapVoltageOutOfRangePower levels have fluctuated outside of normal levels. Not all devices have voltage monitoring instrumentation. See manual for specifications. NOTIFICATION-TYPE .1.3.6.1.4.1.12356.100.1.3.0.105 |
fnTrapPowerSupplyFailurePower supply failure detected. Not available on all models. Available on some devices which support redundant power supplies. See manual for specifications. NOTIFICATION-TYPE .1.3.6.1.4.1.12356.100.1.3.0.106 |
fnTrapAmcIfBypassModeAn AMC interface entered bypass mode. Available on models with an AMC expansion slot. Used with the ASM-CX4 and ASM-FX2 cards. NOTIFICATION-TYPE .1.3.6.1.4.1.12356.100.1.3.0.107 |
fnTrapFanFailureA fan failure has been detected. Not all devices have fan sensors. See manual for specifications. NOTIFICATION-TYPE .1.3.6.1.4.1.12356.100.1.3.0.108 |
fnTrapIfEnterBypassModeInterface entered bypass mode. Available on models with bypass ports. NOTIFICATION-TYPE .1.3.6.1.4.1.12356.100.1.3.0.109 |
fnTrapIfExitBypassModeInterface exited bypass mode. Available on models with bypass ports. NOTIFICATION-TYPE .1.3.6.1.4.1.12356.100.1.3.0.110 |
fnTrapIpChangeIndicates that the IP address of the specified interface has been changed. NOTIFICATION-TYPE .1.3.6.1.4.1.12356.100.1.3.0.201 |
fnTrapTestTrap sent for diagnostic purposes by an administrator. NOTIFICATION-TYPE .1.3.6.1.4.1.12356.100.1.3.0.999 |
fnTrapObjects OBJECT IDENTIFIER .1.3.6.1.4.1.12356.100.1.3.1 |
fnGenTrapMsgGeneric message associated with an event. The content will depend on the nature of the trap.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.12356.100.1.3.1.1 |
fnMIBConformance OBJECT IDENTIFIER .1.3.6.1.4.1.12356.100.10 |
fnSystemComplianceGroupObjects relating to the physical device. Unknown .1.3.6.1.4.1.12356.100.10.1 |
fnMgmtComplianceGroupObjects relating the management of a device. Unknown .1.3.6.1.4.1.12356.100.10.2 |
fnAdminComplianceGroupAdministration access control objects. Unknown .1.3.6.1.4.1.12356.100.10.3 |
fnTrapsComplianceGroupEvent notifications Unknown .1.3.6.1.4.1.12356.100.10.4 |
fnNotifObjectsComplianceGroupObject identifiers used in notifications Unknown .1.3.6.1.4.1.12356.100.10.5 |
fnMIBComplianceThe compliance statement for the application MIB. Unknown .1.3.6.1.4.1.12356.100.10.100 |
More MIBs from Fortinet
Browse all FortinetMIBs →The FORTINET-FORTIGATE-MIB provides SNMP access to monitor and manage FortiGate firewall and network security appliances, exposing critical operational metrics such as interface traffic counters, session states, CPU utilization, and memory usage. The specific revision noted converts non-monotonic counters to Gauge32 types to accurately reflect instantaneous device states rather than cumulative totals.
The FORTINET-FORTIEXTENDER-MIB provides SNMP management capabilities for Fortinet FortiExtender cellular gateway devices, enabling the monitoring of WAN interface status, cellular signal strength metrics (RSRP, RSRQ, SINR), and data usage counters. This module facilitates the tracking of modem state transitions, SIM card status, and network attachment states to ensure reliable cellular failover and primary link operations.
Standard SNMP MIB module defining data structures for FORTINET-MIB.
SNMP MIB module
The FORTINET-FORTIADC-MIB module provides SNMP-based monitoring and management for Fortinet Application Delivery Controllers (ADC), exposing metrics related to virtual server health, load balancing pool status, session throughput, and traffic distribution statistics. It enables network administrators to track real-time application performance, detect service failures, and analyze resource utilization across the ADC infrastructure.
The FORTINET-FORTIAP-MIB facilitates SNMP-based monitoring and management of Fortinet FortiAP wireless access points, exposing critical operational metrics such as radio interface statistics, client association counts, signal strength, and device health status.