FLARION-USERINFO-MIB
AI MIB Summary
Standard SNMP MIB module defining data structures for FLARION-USERINFO-MIB.
53
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
53 total| Object Name |
|---|
rrUserInfo OBJECT IDENTIFIER .1.3.6.1.4.1.8603.4 |
usrSiteInfo OBJECT IDENTIFIER .1.3.6.1.4.1.8603.4.1 |
siteIdentity OBJECT IDENTIFIER .1.3.6.1.4.1.8603.4.1.1 |
siteIdThe name given to the basestation by the wireless carrier. The siteId is controlled by the carrier.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.4.1.1.1 |
siteNameThe site name as chosen by the carrier. The name may be derived from the siteId or from the siteCity.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.4.1.1.2 |
siteOwnerThe owner of the basestation.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.4.1.1.3 |
siteInstallDateDate of installation of the basestation.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.4.1.1.4 |
siteCommissionDateDate of completing commissioning of the basestation.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.4.1.1.5 |
siteOtherInfoThis field is reserved to store any information that the carrier chooses to use.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.4.1.1.6 |
siteLocation OBJECT IDENTIFIER .1.3.6.1.4.1.8603.4.1.2 |
siteStreetStreet address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.4.1.2.1 |
siteCityCity name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.4.1.2.2 |
siteCountyCounty (if applicable).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.4.1.2.3 |
siteStateState (if applicable).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.4.1.2.4 |
sitePostalLocationZip code or postal code (if applicable).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.4.1.2.5 |
siteCountryCountry.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.4.1.2.6 |
siteLatitudeThe site angular distance north or south of the earth's equator, measured in degrees along a meridian.rw FloatAsString .1.3.6.1.4.1.8603.4.1.2.7 |
siteLongitudeThe site angular distance on the earth's surface, measured east or west and expressed in degrees.rw FloatAsString .1.3.6.1.4.1.8603.4.1.2.8 |
siteGroundElevationThe ground elevation of the site, in feet.rw FloatAsString .1.3.6.1.4.1.8603.4.1.2.9 |
siteRfEnv OBJECT IDENTIFIER .1.3.6.1.4.1.8603.4.1.3 |
siteStructureTypeThe method by which the antenna is mounted in the field. Possible options include monopole, flagpole, self support, water tank, etc.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.4.1.3.1 |
siteAntennaConfigUsed to indicate if the basestation antennae are configured as: Sectorized - radiates RF energy in 1,2, or 3 sectors Omni - radiates RF power in all directions Simulcast Low Power - radiates RF energy to each antenna sector by splitting the carrier's signal output after the signal is amplified, thus requiring a single power amplifier Simulcast High Power - radiates the same information to each antenna sector by splitting the carrier's signal output prior to amplification, thus requiring multiple power amplifiers.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.4.1.3.2 |
siteNumSectorsThis parameter is used to indicate the number of sectors in the base station. Options are: 0 = omni 1 = one sector 2 = two sectors 3 = three sectorsrw INTEGER .1.3.6.1.4.1.8603.4.1.3.3 |
siteConnectivity OBJECT IDENTIFIER .1.3.6.1.4.1.8603.4.1.4 |
siteClusterFor EMS management purposes, the network may be divided into clusters. This field identifies the cluster associated with the basestation.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.4.1.4.1 |
siteDomainThe site domain is used with the siteId to form the hostname of the basestation.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.4.1.4.2 |
usrSectorInfo OBJECT IDENTIFIER .1.3.6.1.4.1.8603.4.2 |
sectorAntennaTable SEQUENCE OF SectorAntennaEntry .1.3.6.1.4.1.8603.4.2.1 |
sectorAntennaEntry SectorAntennaEntry .1.3.6.1.4.1.8603.4.2.1.1 |
secAntIndexSector index.ro INTEGER .1.3.6.1.4.1.8603.4.2.1.1.1 |
secAntNameSector name. For example, alpha, beta, gamme, omni.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.4.2.1.1.2 |
secAntMorphologyAn indication of the RF classification for the coverage area of the sector. Possible values include Rural, Dense Rural, Light Suburban, Suburban, Dense Suburban, Light Urban, Urban, and Dense Urban.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.4.2.1.1.3 |
secAntManufacturerName of the manufacturer of the antenna used in this sector.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.4.2.1.1.4 |
secAntSharingUsed to indicate and explain if the antenna is shared with other basestations or other technologies.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.4.2.1.1.5 |
secAntRxDivIndicates if two antennae are used in order to obtain diversity.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.8603.4.2.1.1.6 |
secAntSpatialDivIndicates if antenna spatial diversity (two antennas physically separated) is used.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.8603.4.2.1.1.7 |
secAntPolarDivIndicates if antenna polarization diversity is used.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.8603.4.2.1.1.8 |
secAntModelThe model number of the antenna.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.4.2.1.1.9 |
sectorAntennaCharTable SEQUENCE OF SectorAntennaCharEntry .1.3.6.1.4.1.8603.4.2.2 |
sectorAntennaCharEntry SectorAntennaCharEntry .1.3.6.1.4.1.8603.4.2.2.1 |
secAntCharIndexSector index.ro INTEGER .1.3.6.1.4.1.8603.4.2.2.1.1 |
secAntCharGainThe antenna gain in dBd (a measure of how well the antenna will send or pick up a radio signal compared to a dipole antenna). Valid values are 0 to 100.rw FloatAsString .1.3.6.1.4.1.8603.4.2.2.1.2 |
secAntCharHorizontalBwAn indication of the RF aperture of the antenna based on the 1/2 power (3dB) point as measured off the main beam in the horizontal plane. This value is used along with sectorAntennaVerticalBw in propagation tools to mask the path-loss and model coverage area. Valid values are 0 to 360.rw FloatAsString .1.3.6.1.4.1.8603.4.2.2.1.3 |
secAntCharVertcalBwAn indication of the RF aperture of the antenna based on the 1/2 power (3dB) point as measured off the main beam in the vertical plane. This value is used along with sectorAntennaHorizontalBw in propagation tools to mask the path-loss and model coverage area. Valid values are 0 to 180.rw FloatAsString .1.3.6.1.4.1.8603.4.2.2.1.4 |
secAntCharRadOnCenterThis is a measurement of the antenna center line mounting height, in feet Above Ground Level (AGL).rw INTEGER .1.3.6.1.4.1.8603.4.2.2.1.5 |
secAntCharAzimuthThis is a measure of the antenna main-beam orientation with respect to true north in the horizontal plane.rw INTEGER .1.3.6.1.4.1.8603.4.2.2.1.6 |
secAntCharMechanicalTiltThis is a measure of the physical mounting of the antenna with respect to plumb (vertical). This value indicates values relative to plumb which is assumed to be 0 degrees. Negative values would indicate up-tilt, which is occasionally done to adjust for excessive electrical tilt.rw INTEGER (-20..90) .1.3.6.1.4.1.8603.4.2.2.1.7 |
secAntCharElectricalTiltA measure of the down-tilt designed into the antenna pattern. This is typically measured relative to a point at 90 degrees to a plumb back plane in the main beam of the antenna. These values may be fixed of variable for a given antenna model.rw INTEGER (-20..90) .1.3.6.1.4.1.8603.4.2.2.1.8 |
sectorLnaTable SEQUENCE OF SectorLnaEntry .1.3.6.1.4.1.8603.4.2.3 |
sectorLnaEntry SectorLnaEntry .1.3.6.1.4.1.8603.4.2.3.1 |
secLnaIndexSector index.ro INTEGER .1.3.6.1.4.1.8603.4.2.3.1.1 |
secLnaFilterTypeThis parameter indicated the type of filter used in the LNA/Duplexer unit. It can be simplex (receive only, or duplex for transmit and receive).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.4.2.3.1.2 |
secLnaTowerTopIndicates if the LNA is a tower-top mounted type.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.8603.4.2.3.1.3 |