FLARION-MIB
The MIB module for managing Flarion products.
Main OID:
flarion.1.3.6.1.4.1.8603
505
Objects
Active
Status
3
Dependencies
Imported Objects
Objects
505 total| Object Name |
|---|
flarionThe MIB module for managing Flarion products. MODULE-IDENTITY .1.3.6.1.4.1.8603 |
mibs OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1 |
rrCommonMib OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.1 |
rrTrapVars OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.1.1 |
rrTimeStampThe time at which the event was generated. This value is expressed in seconds since 00:00:00 UTC, January 1, 1970 (see time(2)).ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.8603.1.1.1.1 |
rrSeqNumThe event sequence number.ro INTEGER .1.3.6.1.4.1.8603.1.1.1.2 |
rrSeverityThe event severity.ro AlarmSeverity .1.3.6.1.4.1.8603.1.1.1.3 |
rrMoTypeType managed object associated with this trap.ro MoType .1.3.6.1.4.1.8603.1.1.1.4 |
rrMoIdThe instance of the managed object logical identifier.ro INTEGER .1.3.6.1.4.1.8603.1.1.1.5 |
rrAddtlInfoEvent description.ro AddtlInfo .1.3.6.1.4.1.8603.1.1.1.6 |
rrTraps OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.1.2 |
rrTrapConfig OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.1.4 |
trapTableTrap destinations table. SEQUENCE OF TrapTableEntry .1.3.6.1.4.1.8603.1.1.4.1 |
trapTableEntry TrapTableEntry .1.3.6.1.4.1.8603.1.1.4.1.1 |
trapIndexThe table index value.ro INTEGER .1.3.6.1.4.1.8603.1.1.4.1.1.1 |
trapEnableSet to true(1) to send traps to this destination.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.8603.1.1.4.1.1.2 |
trapCommunityThe trap community string for this destination.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.1.4.1.1.3 |
trapAddrThe IP address of this trap destination.rw IpAddress .1.3.6.1.4.1.8603.1.1.4.1.1.4 |
trapPortThe trap destination port.rw INTEGER .1.3.6.1.4.1.8603.1.1.4.1.1.5 |
trapSendCriticalSend critical severity traps to this destination.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.8603.1.1.4.1.1.6 |
trapSendMajorSend major severity traps to this destination.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.8603.1.1.4.1.1.7 |
trapSendMinorSend minor severity traps to this destination.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.8603.1.1.4.1.1.8 |
trapSendWarningSend warning severity traps to this destination.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.8603.1.1.4.1.1.9 |
trapSendClearedSend cleared severity traps to this destination.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.8603.1.1.4.1.1.10 |
rrTrapHistory OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.1.5 |
trapHistSizeMaximum number of entries to store in SNMP trap history table.rw INTEGER .1.3.6.1.4.1.8603.1.1.5.1 |
trapHistTableThis is the SNMP trap history table. SEQUENCE OF TrapHistEntry .1.3.6.1.4.1.8603.1.1.5.2 |
trapHistEntry TrapHistEntry .1.3.6.1.4.1.8603.1.1.5.2.1 |
trapHistIndexThe trap history index.ro INTEGER .1.3.6.1.4.1.8603.1.1.5.2.1.1 |
trapHistOidThe SNMP trap OID.ro OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.1.5.2.1.2 |
trapHistMoTypeThe managed object which generated this trap.ro MoType .1.3.6.1.4.1.8603.1.1.5.2.1.3 |
trapHistMoIdThe managed object instance identifier.ro INTEGER .1.3.6.1.4.1.8603.1.1.5.2.1.4 |
trapHistTimeThe value of MIB II's sysUpTime object when the trap was generated.ro TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.8603.1.1.5.2.1.5 |
trapHistInfoAdditional information related to this trap.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.1.5.2.1.6 |
trapHistTimestampThe time at which the trap was generated. This value is expressed in seconds since 00:00:00 UTC, January 1, 1970 (see time(2)).ro INTEGER .1.3.6.1.4.1.8603.1.1.5.2.1.7 |
trapHistSeqNumThe trap's sequence number.ro INTEGER .1.3.6.1.4.1.8603.1.1.5.2.1.8 |
rrTrapProv OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.1.6 |
trapProvTableThis is the SNMP trap provisioning table. SEQUENCE OF TrapProvEntry .1.3.6.1.4.1.8603.1.1.6.1 |
trapProvEntry TrapProvEntry .1.3.6.1.4.1.8603.1.1.6.1.1 |
trapProvIndexA unique identifier for each row in the table.ro INTEGER .1.3.6.1.4.1.8603.1.1.6.1.1.1 |
trapProvNameThe name of the SNMP trap.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.1.6.1.1.2 |
trapProvEnableIndicates whether the SNMP trap is enabled or disabled. Set to true(1) to enable the trap, false(2) to disable the trap.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.8603.1.1.6.1.1.3 |
rrMib OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2 |
rrManagedObjs OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1 |
rrBaseStation OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1.1 |
rrBsInfo OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1.1.1 |
rrBsAlarmStateBase station current highest alarm severity.rodeprecated AlarmSeverity .1.3.6.1.4.1.8603.1.2.1.1.1.1 |
rrBsMaintStateBase station maintance State.rodeprecated MaintState .1.3.6.1.4.1.8603.1.2.1.1.1.2 |
rrBsVersionBase station software image version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.1.3 |
rrBsMibVersionThe current Flarion MIB version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.1.7 |
rrBsDbAuditResultThe result of the basestation database audit.ro PassFail .1.3.6.1.4.1.8603.1.2.1.1.1.8 |
aclTableThis table is used to configure the SNMP access control list. SEQUENCE OF AclEntry .1.3.6.1.4.1.8603.1.2.1.1.1.9 |
aclEntry AclEntry .1.3.6.1.4.1.8603.1.2.1.1.1.9.1 |
aclIndexThe table index value.ro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.1.9.1.1 |
aclAddressA get on this object returns the ACL address. A new ACL address can be added by first creating a conceptual row by setting aclStatus to createAndWait(5). Then set this object with the ACL address value. Finally, commit the value by setting aclStatus to active(1).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.1.9.1.2 |
aclStatusThis object is used to change the state of a conceptual row. Only active(1), createAndWait(5), and destroy(6) are supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.1.9.1.3 |
scratchPadTableThis table is used to enter miscellaneous notes . SEQUENCE OF ScratchPadEntry .1.3.6.1.4.1.8603.1.2.1.1.1.10 |
scratchPadEntry ScratchPadEntry .1.3.6.1.4.1.8603.1.2.1.1.1.10.1 |
scratchPadIndexThe table index value.ro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.1.10.1.1 |
scratchPadNoteA get on this object returns the scratch pad note. A new note can be added by first setting scratchPadStatus to createAndWait(5) to create the conceptual row. Then set this object with the new value. Finally, commit the value by setting scratchPadStatus to active(1).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.1.10.1.2 |
scratchPadStatusThis object is used to change the state of a conceptual row. Only active(1), createAndWait(5), and destroy(6) are supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.1.10.1.3 |
rrForeignAgent OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1.1.2 |
faProv OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1.1.2.1 |
faTosValMobile IP Type of Service value (refer to RFC 791).rwdeprecated INTEGER .1.3.6.1.4.1.8603.1.2.1.1.2.1.2 |
faMipLifetimeMaximum lifetime advertised for this FA. The lifetime is defined in seconds, default value is 400. The request timer will be limited with this value. Special case: 65535 (or more) seconds mean unlimited time (the binding will not expire).rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.2.1.3 |
faTunnelLifetimeLifetime of the temporary home entry (tunnel), in seconds.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.2.1.4 |
faRrepRtTime to wait for RREP after sending a RREQ, in msec.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.2.1.5 |
faOutgoingTimerOutgoing handoff time, in msec.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.2.1.6 |
faRegistrationTimerAmount of time a mobile has to register, in msec.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.2.1.8 |
faMbbSupportMake-Before-Break handoff support. When enabled, during a handoff, the old Foreign Agent waits until the airlink to the mobile drops before it uses the temporary tunnel between FA's.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.2.1.11 |
faTrashLogLevelTrash logs above specified level. The higher the level, the more logs generated by the Foreign Agent.rw LogLevel .1.3.6.1.4.1.8603.1.2.1.1.2.1.12 |
faMipDscpMobile IP Diffserv codepoint.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.2.1.13 |
faStats OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1.1.2.2 |
faNumMobilesServedro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.2.2.1 |
faIcmp OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1.1.2.2.2 |
faFaaSentro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.2.2.2.1 |
faFaaResponseAsro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.2.2.2.2 |
faAsRecvdro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.2.2.2.3 |
faMipReg OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1.1.2.2.3 |
faRreqRecvdro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.2.2.3.1 |
faRreqRelayedro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.2.2.3.2 |
faRreqDeniedUnspecro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.2.2.3.3 |
faRreqDeniedAdminProhibro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.2.2.3.4 |
faRreqDeniedNoResourcero INTEGER .1.3.6.1.4.1.8603.1.2.1.1.2.2.3.5 |
faRreqDeniedFailAuthro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.2.2.3.6 |
faRreqDeniedLifeTooLongro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.2.2.3.7 |
faRreqDeniedPoorlyFormedro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.2.2.3.8 |
faRreqDeniedEncapUnavailro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.2.2.3.9 |
faRreqDeniedHaUnreachro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.2.2.3.10 |
faRreqDeniedMissingNairo INTEGER .1.3.6.1.4.1.8603.1.2.1.1.2.2.3.11 |
faRreqDeniedMissingChalro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.2.2.3.12 |
faRreqDeniedUnknownChalro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.2.2.3.13 |
faRreqDeniedInvalidCoaro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.2.2.3.14 |
faRreqDeniedUnknownHaro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.2.2.3.15 |
faRreqDeniedRevTunlUnavailro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.2.2.3.16 |
faRreqDeniedRegTimeoutro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.2.2.3.17 |
faRreqDeniedFailedVendorro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.2.2.3.18 |
faRrepRecvdro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.2.2.3.19 |
faRrepRelayedro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.2.2.3.20 |
faRrepSentro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.2.2.3.21 |
faExtensions OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1.1.2.2.4 |
faPfaneExtRecvdro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.2.2.4.1 |
faMnChalExtRecvdro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.2.2.4.2 |
faMnFaAuthRecvdro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.2.2.4.3 |
faMnNaiExtRecvdro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.2.2.4.4 |
faRouteOptimization OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1.1.2.2.5 |
faBuSentro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.2.2.5.1 |
faBuRecvdro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.2.2.5.2 |
rrPaging OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1.1.4 |
pagingProv OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1.1.4.1 |
pgUdpPortUDP port for Page Requests/Repsonse packets.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.4.1.1 |
pgLuUdpPortUDP port for Location Update/Acks and Naks.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.4.1.2 |
pgApaProv OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1.1.4.1.6 |
pgApaRateBiasTimePage request round trip (bias) time, in msec. Time added to compute page backoff timeout (for retransmission of page requests).rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.4.1.6.1 |
pgApaMonIntvlFctrsFactor multiplied by monitoring interval. This is added to pageApaRateBiasTime to make up the page backoff timeout. The monitoring interval itself, is sent to the APA in a L3 Sleep message.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.4.1.6.2 |
pgApaBackoffFctrsTableTable of Area Paging backoff timeout factors. For each retransmission of a page request, the page backoff timeout (2000 msec) is multiplied by the page backoff timeout factor for that retransmission. SEQUENCE OF PgBackoffFctrsEntry .1.3.6.1.4.1.8603.1.2.1.1.4.1.6.4 |
pgBackoffFctrsEntryArea Paging backoff timeout factors table entries. PgBackoffFctrsEntry .1.3.6.1.4.1.8603.1.2.1.1.4.1.6.4.1 |
pgBackoffFctrIndexThe backoff timeout factor table index.ro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.4.1.6.4.1.1 |
pgBackoffTimeoutFactorThe backoff timeout factor.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.4.1.6.4.1.2 |
pgApaIntvlTimeoutWhen the page process starts, paging retransmissions will continue until either the target wakes-up or this timer expires. Recommended value is 20.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.4.1.6.5 |
pgApaIntvlTimeoutActionThis indicates the state clearing policy following an interval timeout: none Remain in paging (just clear LPA Page List). reset Clean up and return to mobile to SLEEPING state.rw Enumeration .1.3.6.1.4.1.8603.1.2.1.1.4.1.6.6 |
pgApaSuppressTimeoutPage Suppress Timeout in seconds. This timeout is the amount of time that we suppress pages for after receiving a page response with Access indicator.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.4.1.6.7 |
pgApaLuSpoofSupportIndicates whether spoof support is enabled or not. This determines how the list of LPAs is managed (slide / no slide).rw Enumeration .1.3.6.1.4.1.8603.1.2.1.1.4.1.6.8 |
pgApaListLimitMaximum number of Location Updates from basestation that will be saved in the basestation list as a result of receiving location updates. If this value is reached, a NAK packet is sent to the LPA at the basestation that sent the update causing the limit to be reached.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.4.1.6.9 |
pgApaFwRuleNumFirewall rule number used in setting up rule for diverting location updates to the divert socket for location updates.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.4.1.6.10 |
pgApaMobilesLuThreshPctPercentage applied to the maximum number of sleeping mobiles allowed. Used in computing the number of sleeping mobiles LU threshold. This is used to avoid service disruptions in over-loaded cells.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.4.1.6.11 |
pgApaTrashLogLevelLog messages with levels above the specified value will not be logged.rw LogLevel .1.3.6.1.4.1.8603.1.2.1.1.4.1.6.12 |
pgLpaProv OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1.1.4.1.7 |
pgLpaL2PageTimeoutL2 Page Timeout. Timeout in seconds for which we will continue to wait for the mobile to go through access or to receive an L2 Page Response for presence test.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.4.1.7.1 |
pgLpaSpoofThresholdThe rate of failure of Location Update Requests below which anti-spoof mechanism kicks in.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.4.1.7.2 |
pgLpaBiasFactorThe factor which regulates the effect past failures have on the exponential weighted average.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.4.1.7.3 |
pgLpaSpoofIntervalLPA spoof interval.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.4.1.7.4 |
pgLpaTrashLogLevelLog messages with levels above the specified value will not be logged.rw LogLevel .1.3.6.1.4.1.8603.1.2.1.1.4.1.7.5 |
pagingStats OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1.1.4.2 |
pgApaStats OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1.1.4.2.1 |
pgApaMobilesSleepingNumber of mobiles currently sleeping.ro Unsigned32 .1.3.6.1.4.1.8603.1.2.1.1.4.2.1.1 |
pgApaMobilesBeingPagedNumber of mobiles currently being paged.ro Unsigned32 .1.3.6.1.4.1.8603.1.2.1.1.4.2.1.2 |
pgApaL3PgReqPktsSentNumber of L3 Page Request Packets sent.ro Unsigned32 .1.3.6.1.4.1.8603.1.2.1.1.4.2.1.9 |
pgApaL3PgRspPktsRcvdNumber L3 Page Response Packets received.ro Unsigned32 .1.3.6.1.4.1.8603.1.2.1.1.4.2.1.10 |
pgApaL3AccessRspsRcvdNumber L3 Page Responses with Access received.ro Unsigned32 .1.3.6.1.4.1.8603.1.2.1.1.4.2.1.11 |
pgApaL3AliveRspsRcvdNumber of L3 Page Responses with Alive received.ro Unsigned32 .1.3.6.1.4.1.8603.1.2.1.1.4.2.1.12 |
pgApaL3LusRcvdNumber of L3 Location Updates received.ro Unsigned32 .1.3.6.1.4.1.8603.1.2.1.1.4.2.1.13 |
pgApaL3LuAcksSentNumber of L3 Location Acks sent.ro Unsigned32 .1.3.6.1.4.1.8603.1.2.1.1.4.2.1.14 |
pgApaPageIntvlTimeoutsNumber of times a page interval timeout occurred.ro Unsigned32 .1.3.6.1.4.1.8603.1.2.1.1.4.2.1.15 |
pgApaPageSuppressTimeoutsNumber of Page Suppress Timeouts.ro Unsigned32 .1.3.6.1.4.1.8603.1.2.1.1.4.2.1.16 |
pgApaPageBackoffTimeoutsNumber of times backoff timers went off.ro Unsigned32 .1.3.6.1.4.1.8603.1.2.1.1.4.2.1.17 |
pgLpaStats OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1.1.4.2.2 |
pgLpaMobilesBeingPagedNumber of mobiles currently being paged.ro Unsigned32 .1.3.6.1.4.1.8603.1.2.1.1.4.2.2.2 |
pgLpaL3PgReqPktRcvdNumber of L3 Page Request Packet received.ro Unsigned32 .1.3.6.1.4.1.8603.1.2.1.1.4.2.2.9 |
pgLpaL3PgRspPktSentNumber of L3 Page Responses sent.ro Unsigned32 .1.3.6.1.4.1.8603.1.2.1.1.4.2.2.11 |
pgLpaL2PgIntvlTimeoutsNumber of times L2 Page Requests timed out (no L3 Up).ro Unsigned32 .1.3.6.1.4.1.8603.1.2.1.1.4.2.2.12 |
pgLpaLocUpdPktSentNumber of Location Update Packet messages sent.ro Unsigned32 .1.3.6.1.4.1.8603.1.2.1.1.4.2.2.16 |
pgLpaLocUpdRspPktRcvdNumber of Location Update Response Packet messages received.ro Unsigned32 .1.3.6.1.4.1.8603.1.2.1.1.4.2.2.17 |
rrNtp OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1.1.5 |
ntpServerTableTable of NTP servers. SEQUENCE OF NtpServerEntry .1.3.6.1.4.1.8603.1.2.1.1.5.2 |
ntpServerEntryNTP server table entry. NtpServerEntry .1.3.6.1.4.1.8603.1.2.1.1.5.2.1 |
ntpServerIndexNTP server index.ro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.5.2.1.1 |
ntpServerEnabledIndicates if this NTP server entry is enabled.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.5.2.1.2 |
ntpServerIdNTP DNS name or IP address.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.5.2.1.3 |
rrDhcp OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1.1.8 |
dhcpProv OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1.1.8.1 |
dhcpUseSysDnsIndicates if DHCP uses the MCU DNS settings.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.8.1.1 |
dhcpDnsServerTableTable of DHCP DNS servers. SEQUENCE OF DhcpDnsServerEntry .1.3.6.1.4.1.8603.1.2.1.1.8.1.2 |
dhcpDnsServerEntryDHCP DNS server table entry. DhcpDnsServerEntry .1.3.6.1.4.1.8603.1.2.1.1.8.1.2.1 |
dhcpDnsIndexDHCP DNS server index.ro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.8.1.2.1.1 |
dhcpDnsIpAddrDHCP DNS IP address.rw IpAddress .1.3.6.1.4.1.8603.1.2.1.1.8.1.2.1.2 |
dhcpServerIpAddrThis represents the DHCP Server IP Address which is returned in any DHCP protocol packet in the siaddr fieldrw IpAddress .1.3.6.1.4.1.8603.1.2.1.1.8.1.3 |
rrAuthServer OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1.1.9 |
aaProv OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1.1.9.1 |
aaServerTimeoutrw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.9.1.2 |
aaServerRetryrw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.9.1.3 |
aaServerTrashLogLevelLog messages with levels above the specified value will not be logged.rw LogLevel .1.3.6.1.4.1.8603.1.2.1.1.9.1.8 |
aaRadServTableTable of RADIUS servers. SEQUENCE OF AaRadServEntry .1.3.6.1.4.1.8603.1.2.1.1.9.1.11 |
aaRadServEntryRADIUS server table entry. AaRadServEntry .1.3.6.1.4.1.8603.1.2.1.1.9.1.11.1 |
aaRadServIndexRADIUS server index.ro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.9.1.11.1.1 |
aaRadServValidIndicates if this RADIUS server entry is valid.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.9.1.11.1.2 |
aaRadServNameRADIUS server name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.9.1.11.1.3 |
aaRadServIpAddrRADIUS server IP address.rw IpAddress .1.3.6.1.4.1.8603.1.2.1.1.9.1.11.1.4 |
aaRadServUdpPortRADIUS server UDP port.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.9.1.11.1.5 |
aaRadServSecretRADIUS server secret key.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.9.1.11.1.6 |
rrAccountingServer OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1.1.10 |
acntRadiusStatusRADIUS server statusro AdminState .1.3.6.1.4.1.8603.1.2.1.1.10.1 |
acntProv OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1.1.10.2 |
acntRadServTableTable of RADIUS servers. SEQUENCE OF AcntRadServEntry .1.3.6.1.4.1.8603.1.2.1.1.10.2.1 |
acntRadServEntryRADIUS server table entry. AcntRadServEntry .1.3.6.1.4.1.8603.1.2.1.1.10.2.1.1 |
acntRadServIndexRADIUS server index.ro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.10.2.1.1.1 |
acntRadServValidIndicates if this RADIUS server entry is valid.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.10.2.1.1.2 |
acntRadServNameRADIUS server name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.10.2.1.1.3 |
acntRadServAddrRADIUS server IP address.rw IpAddress .1.3.6.1.4.1.8603.1.2.1.1.10.2.1.1.4 |
acntRadServPortRADIUS server port.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.10.2.1.1.5 |
acntRadServSecretRADIUS server secret key.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.10.2.1.1.6 |
acntRadServTimeoutRADIUS server timeout.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.10.2.2 |
acntRadServRetryRADIUS server maximum retry.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.10.2.3 |
acntDelaySendInclude delay attribute.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.10.2.4 |
acntServDownHdServer down handling.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.10.2.5 |
acntL2UpDebounceL2Up debounce time.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.10.2.6 |
acntDoPerRARDo accounting per RAR(true) / BBU(false).rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.10.2.7 |
acntL2DownDebounceL2Down debounce time.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.10.2.8 |
acntUpdateBandAccounting update max bandwidth (bytes/sec).rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.10.2.9 |
rrRelease OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1.1.12 |
relConfig OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1.1.12.1 |
relServerIpAddrThe IP address of the FTP server containing the release.rwdeprecated IpAddress .1.3.6.1.4.1.8603.1.2.1.1.12.1.1 |
relPkgPathThe absolute path to the package file on the FTP server specified by relServerIpAddr.rwdeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.12.1.2 |
relOsPathThe absolute path to the OS distribution directory on the FTP server specified by relServerIpAddr.rwdeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.12.1.3 |
relApplyToStandbySet this object to 'true' to upgrade the standby partition. This object is only relevant when upgrading packages.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.12.1.4 |
relBootPartitionThe partition to boot after next system reboot.rwdeprecated INTEGER .1.3.6.1.4.1.8603.1.2.1.1.12.1.5 |
relPkgRunVerThis object sets the package version to run. Setting this object causes the system to automatically restart or reboot and run the specified package. A reboot will be performed if the relBootPartition object is different than the current active partition, specified by activePartition.rwdeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.12.1.6 |
relOsUpgradeTypeOS upgrade type.rwdeprecated OsUpgradeType .1.3.6.1.4.1.8603.1.2.1.1.12.1.7 |
relStatus OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1.1.12.2 |
relUpgradeStatusThe current download status.rodeprecated DownloadState .1.3.6.1.4.1.8603.1.2.1.1.12.2.1 |
relPctCompleteDownload progress expressed as percentage complete.rodeprecated INTEGER .1.3.6.1.4.1.8603.1.2.1.1.12.2.2 |
relErrorReasonIf relUpgradeStatus reports failure, this object will contain the reason for the failure.rodeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.12.2.3 |
activePartitionThe disk slice number of the active partition.rodeprecated INTEGER .1.3.6.1.4.1.8603.1.2.1.1.12.2.4 |
activeOsVerThe active partition OS version.rodeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.12.2.5 |
standbyOsVerThe standby partition OS version.rodeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.12.2.6 |
activePkgTableActive partition package table.deprecated SEQUENCE OF ActivePkgTableEntry .1.3.6.1.4.1.8603.1.2.1.1.12.2.7 |
activePkgTableEntrydeprecated ActivePkgTableEntry .1.3.6.1.4.1.8603.1.2.1.1.12.2.7.1 |
activePkgIndexThe table index value.rodeprecated INTEGER .1.3.6.1.4.1.8603.1.2.1.1.12.2.7.1.1 |
activePkgNameThe package name.rodeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.12.2.7.1.2 |
standbyPkgTableStandby partition package table.deprecated SEQUENCE OF StandbyPkgTableEntry .1.3.6.1.4.1.8603.1.2.1.1.12.2.8 |
standbyPkgTableEntrydeprecated StandbyPkgTableEntry .1.3.6.1.4.1.8603.1.2.1.1.12.2.8.1 |
standbyPkgIndexThe table index value.rodeprecated INTEGER .1.3.6.1.4.1.8603.1.2.1.1.12.2.8.1.1 |
standbyPkgNameThe package name.rodeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.12.2.8.1.2 |
currentRunVerCurrent running version.rodeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.12.2.9 |
relMediaTypeMedia type.rodeprecated MediaType .1.3.6.1.4.1.8603.1.2.1.1.12.2.10 |
relAction OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1.1.12.3 |
relDoPkgUpgradeSet to 'true' to begin package upgrade. If relConfig.relApplyToStandby object is set to 'true', the standby partition will be upgraded.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.12.3.1 |
relDoOsUpgradeSet to 'true' to begin OS upgrade.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.12.3.2 |
relDeletePkgThis object takes a package name as its value. Setting this object will delete the package. If the relConfig.relApplyToStandby object is set to 'true', the package will be deleted from the standby partition.rwdeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.12.3.3 |
relSysActionWhen this object is set to restart(1), the basestation software software is restarted. If reboot(2) is specified, the MCU is rebooted.rwdeprecated SysAction .1.3.6.1.4.1.8603.1.2.1.1.12.3.4 |
rrDns OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1.1.13 |
dnsReconfigureSet to true to reconfigure DNS.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.13.1 |
dnsNameServerTableDNS name server table. SEQUENCE OF DnsNameServerEntry .1.3.6.1.4.1.8603.1.2.1.1.13.2 |
dnsNameServerEntry DnsNameServerEntry .1.3.6.1.4.1.8603.1.2.1.1.13.2.1 |
dnsNameServerIndexThe table index value.ro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.13.2.1.1 |
dnsNameServerAddrThe IP address of DNS name server.rw IpAddress .1.3.6.1.4.1.8603.1.2.1.1.13.2.1.2 |
dnsSearchTableDNS domain search table. SEQUENCE OF DnsSearchEntry .1.3.6.1.4.1.8603.1.2.1.1.13.3 |
dnsSearchEntry DnsSearchEntry .1.3.6.1.4.1.8603.1.2.1.1.13.3.1 |
dnsSearchIndexThe table index value.ro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.13.3.1.1 |
dnsSearchDomainThe domain name suffix.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.13.3.1.2 |
rrRoutes OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1.1.14 |
routeProvTableThis table is used to configure the routing table. SEQUENCE OF RouteProvEntry .1.3.6.1.4.1.8603.1.2.1.1.14.1 |
routeProvEntry RouteProvEntry .1.3.6.1.4.1.8603.1.2.1.1.14.1.1 |
routeProvIndexThe table index value.ro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.14.1.1.1 |
routeProvNameA get on this object returns the route name. A new route can be added by first setting routeProvStatus to createAndWait(5) to create the conceptual row. Then set this object with the route value. Finally, commit the value by setting routeProvStatus to active(1).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.14.1.1.2 |
routeProvStatusThis object is used to change the state of a conceptual row. Only active(1), createAndWait(5), and destroy(6) are supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.14.1.1.3 |
routeRuntimeTableThis table displays the routes available in the system. SEQUENCE OF RouteRuntimeEntry .1.3.6.1.4.1.8603.1.2.1.1.14.2 |
routeRuntimeEntry RouteRuntimeEntry .1.3.6.1.4.1.8603.1.2.1.1.14.2.1 |
routeRuntimeIndexThe table index value.ro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.14.2.1.1 |
routeRuntimeNameThe route information.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.14.2.1.2 |
routeProtocolThe route protocol.rw RouteProtocol .1.3.6.1.4.1.8603.1.2.1.1.14.3 |
routeTosValThe route Type Of Service.rwdeprecated INTEGER .1.3.6.1.4.1.8603.1.2.1.1.14.4 |
routeDscpThe route Diffserv codepoint.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.14.5 |
rrUserGroups OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1.1.15 |
userGroupTableThis table contains a set of user groups used for QoS (Quality of Service). SEQUENCE OF UserGroupEntry .1.3.6.1.4.1.8603.1.2.1.1.15.1 |
userGroupEntry UserGroupEntry .1.3.6.1.4.1.8603.1.2.1.1.15.1.1 |
userGroupIndexUser group index.ro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.15.1.1.1 |
userGroupNameA get on this object returns the user group name. A new group can be added by first setting userGroupStatus to createAndWait(5) to create the conceptual row. Then set this object with the group's name. Finally, commit the value by setting userGroupStatus to active(1).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.15.1.1.2 |
userGroupStatusThis object is used to change the state of a conceptual row. Only active(1), createAndWait(5), and destroy(6) are supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.15.1.1.3 |
userGroupUlRateCapUser group uplink rate cap.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.15.1.1.4 |
userGroupDlRateCapUser group downlink rate cap.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.15.1.1.5 |
groupRulesTableThis table contains a set of QoS rules for each user group. SEQUENCE OF GroupRulesEntry .1.3.6.1.4.1.8603.1.2.1.1.15.2 |
groupRulesEntry GroupRulesEntry .1.3.6.1.4.1.8603.1.2.1.1.15.2.1 |
groupIndexThis object specifies the user group being queried. It is equal to the userGroupIndex in the userGroupTable.ro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.15.2.1.1 |
groupRuleIndexThis object is an index to a rule for a particular user group, specified by groupIndex.ro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.15.2.1.2 |
groupRuleNameA get on this object returns the user group rule. A new rule can be added by first setting groupRuleStatus to createAndWait(5) to create the conceptual row. Then set this object with the group's name. Finally, commit the value by setting groupRuleStatus to active(1).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.15.2.1.3 |
groupRuleStatusThis object is used to change the state of a conceptual row. Only active(1), createAndWait(5), and destroy(6) are supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.15.2.1.4 |
groupStreamsTableThis table contains stream configuration for each user groups. SEQUENCE OF GroupStreamsEntry .1.3.6.1.4.1.8603.1.2.1.1.15.3 |
groupStreamsEntry GroupStreamsEntry .1.3.6.1.4.1.8603.1.2.1.1.15.3.1 |
groupIndex1ro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.15.3.1.1 |
groupStreamIndexro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.15.3.1.2 |
groupStreamUlRateCapUplink rate cap.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.15.3.1.3 |
groupStreamDlRateCapDownlink rate cap.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.15.3.1.4 |
groupStreamUlTokenGainUplink token gain.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.15.3.1.5 |
groupStreamDlTokenGainDownlink token gain.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.15.3.1.6 |
rrCtCore OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1.1.16 |
ctCoreProv OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1.1.16.1 |
ctServerTableTable of Context Transfer Core servers. SEQUENCE OF CtServerEntry .1.3.6.1.4.1.8603.1.2.1.1.16.1.1 |
ctServerEntryCT Core server table entry. CtServerEntry .1.3.6.1.4.1.8603.1.2.1.1.16.1.1.1 |
ctServerIndexContext Transfer server index.ro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.16.1.1.1.1 |
ctServerValidIndicates if this CT server entry is valid.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.16.1.1.1.2 |
ctServerNameCT server name.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.16.1.1.1.3 |
ctServerAddrCT server IP address.rw IpAddress .1.3.6.1.4.1.8603.1.2.1.1.16.1.1.1.4 |
ctServerPortCT server port.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.16.1.1.1.5 |
ctServerSecretCT server secret key.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.16.1.1.1.6 |
ctServerTimeoutCT server timeout.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.16.1.2 |
ctServerRetryCT server maximum retry.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.16.1.3 |
rrL2AdmissionCtrl OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1.1.17 |
l2AcProv OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1.1.17.1 |
l2AcPagingCycleThis object indicates how often, in superslots, a sleeping mobile checks for incoming pages. The only valid value is 200 cycles or 0 (mobile does not check for pages).rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.17.1.1 |
l2AcStats OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1.1.17.2 |
l2AcRegistrationReqLayer 2 registration requests.ro Counter32 .1.3.6.1.4.1.8603.1.2.1.1.17.2.1 |
l2AcRegistrationReqFailLayer 2 registration request failures.ro Counter32 .1.3.6.1.4.1.8603.1.2.1.1.17.2.2 |
l2AcHandoffReqLayer 2 handoff requests.ro Counter32 .1.3.6.1.4.1.8603.1.2.1.1.17.2.3 |
l2AcHandoffReqFailuresLayer 2 handoff request failures.ro Counter32 .1.3.6.1.4.1.8603.1.2.1.1.17.2.4 |
l2AcAaaAuthRequestsSentAAA Access-Request messages sent.ro Counter32 .1.3.6.1.4.1.8603.1.2.1.1.17.2.14 |
l2AcAaaAuthChallengesRecvdAAA Access-Challenge messages received.ro Counter32 .1.3.6.1.4.1.8603.1.2.1.1.17.2.15 |
l2AcAaaAuthRejectsRecvdAAA Access-Reject messages received.ro Counter32 .1.3.6.1.4.1.8603.1.2.1.1.17.2.16 |
l2AcAaaAuthAcceptsRecvdAAA Access-Accept messages received.ro Counter32 .1.3.6.1.4.1.8603.1.2.1.1.17.2.17 |
l2AcAaaAuthNetworkTimeoutsAAA network timeout events.ro Counter32 .1.3.6.1.4.1.8603.1.2.1.1.17.2.18 |
l2AcMobChallengeTimeoutsMobiles timeouts when challenged.ro Counter32 .1.3.6.1.4.1.8603.1.2.1.1.17.2.22 |
l2AcUnilateralKeyTimeoutsLayer 2 unilateral key timeouts.ro Counter32 .1.3.6.1.4.1.8603.1.2.1.1.17.2.23 |
l2AcUnilateralKeyReqLayer 2 unilateral key requests.ro Counter32 .1.3.6.1.4.1.8603.1.2.1.1.17.2.24 |
l2AcUnilateralKeyRespLayer 2 unilateral key responses.ro Counter32 .1.3.6.1.4.1.8603.1.2.1.1.17.2.25 |
l2AcRelayMsgRecvdRelay from mobile messages received.ro Counter32 .1.3.6.1.4.1.8603.1.2.1.1.17.2.28 |
l2AcSmallestL2RegIntvlSmaller L2 Registration interval, in msec.ro Counter32 .1.3.6.1.4.1.8603.1.2.1.1.17.2.29 |
l2AcLargestL2RegIntvlLargest L2 Registration interval, in msec.ro Counter32 .1.3.6.1.4.1.8603.1.2.1.1.17.2.30 |
l2AcAverageL2RegIntvlAverage L2 Registration interval, in msec.ro Counter32 .1.3.6.1.4.1.8603.1.2.1.1.17.2.31 |
l2AcCoreCtMsgRecvdFailCore-CT messages received failures.ro Counter32 .1.3.6.1.4.1.8603.1.2.1.1.17.2.33 |
l2AcCoreCtMsgRecvdCore-CT messages received.ro Counter32 .1.3.6.1.4.1.8603.1.2.1.1.17.2.34 |
l2AcBadCoreCtMsgRecvdBad Core-CT messages received.ro Counter32 .1.3.6.1.4.1.8603.1.2.1.1.17.2.35 |
l2AcCoreCtAckRecvdCore-CT ACK messages received.rodeprecated Counter32 .1.3.6.1.4.1.8603.1.2.1.1.17.2.36 |
l2AcCoreCtAnswerRecvdCore-CT Answer received.rodeprecated Counter32 .1.3.6.1.4.1.8603.1.2.1.1.17.2.37 |
l2AcCoreCtCreatesCore-CT context transfer creates.ro Counter32 .1.3.6.1.4.1.8603.1.2.1.1.17.2.38 |
l2AcCoreCtCreateFailuresCore-CT context transfer create failures.ro Counter32 .1.3.6.1.4.1.8603.1.2.1.1.17.2.39 |
l2AcCoreCtUpdatesCore-CT context transfer updates.ro Counter32 .1.3.6.1.4.1.8603.1.2.1.1.17.2.40 |
l2AcCoreCtUpdateFailuresCore-CT context transfer update failures.ro Counter32 .1.3.6.1.4.1.8603.1.2.1.1.17.2.41 |
l2AcCoreCtDeletesCore-CT context transfer deletes.ro Counter32 .1.3.6.1.4.1.8603.1.2.1.1.17.2.42 |
l2AcCoreCtDeleteFailuresCore-CT context transfer delete failures.ro Counter32 .1.3.6.1.4.1.8603.1.2.1.1.17.2.43 |
l2AcCoreCtRequestCore-CT context transfer requests.ro Counter32 .1.3.6.1.4.1.8603.1.2.1.1.17.2.44 |
l2AcCoreCtRequestFailuresCore-CT context transfer request failures.ro Counter32 .1.3.6.1.4.1.8603.1.2.1.1.17.2.45 |
l2AcCoreCtRequestSuccessesCore-CT context transfer request successes.ro Counter32 .1.3.6.1.4.1.8603.1.2.1.1.17.2.46 |
l2AcCoreCtCreateSuccessesCore-CT context transfer Create Successes.ro Counter32 .1.3.6.1.4.1.8603.1.2.1.1.17.2.47 |
l2AcCoreCtUpdateSuccessesCore-CT context transfer Update Successes.ro Counter32 .1.3.6.1.4.1.8603.1.2.1.1.17.2.48 |
l2AcCoreCtDeleteSuccessesCore-CT context transfer Delete Successes.ro Counter32 .1.3.6.1.4.1.8603.1.2.1.1.17.2.49 |
l2AcCoreCtContextTransferGetResponsesCore-CT context transfer Get Responses.ro Counter32 .1.3.6.1.4.1.8603.1.2.1.1.17.2.50 |
l2AcCoreCtContextTransferCreateResponsesCore-CT context transfer Create Responses.ro Counter32 .1.3.6.1.4.1.8603.1.2.1.1.17.2.51 |
l2AcCoreCtContextTransferUpdateResponsesCore-CT context transfer Update Responses.ro Counter32 .1.3.6.1.4.1.8603.1.2.1.1.17.2.52 |
l2AcCoreCtContextTransferDeleteResponsesCore-CT context transfer Delete Responses.ro Counter32 .1.3.6.1.4.1.8603.1.2.1.1.17.2.53 |
l2AcCoreCtReceivedStaleMobileCore-CT Messages received for a Mobile which has already left the system.ro Counter32 .1.3.6.1.4.1.8603.1.2.1.1.17.2.54 |
rrUpgrade OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1.1.18 |
upgradeCurrReleaseCurrent running release version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.18.1 |
upgradeReleaseTableA table showing the releases that are installed. SEQUENCE OF UpgradeReleaseEntry .1.3.6.1.4.1.8603.1.2.1.1.18.2 |
upgradeReleaseEntry UpgradeReleaseEntry .1.3.6.1.4.1.8603.1.2.1.1.18.2.1 |
releaseIndexThe table index value.ro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.18.2.1.1 |
releaseVersionThe package name.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.18.2.1.2 |
upgradeServerAddrThe IP address of the FTP server containing the release.rw IpAddress .1.3.6.1.4.1.8603.1.2.1.1.18.3 |
upgradeReleasePathThe absolute path to the release image file on the FTP server specified by upgradeServerAddr.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.18.4 |
upgradeAddReleaseSet to 'true' to begin release upgrade. This object always returns 'false'.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.18.5 |
upgradeActivateReleaseThis object takes a release version as its value. Setting this object will cause the system to reboot and activate the specified release. This object always returns a zero-length string.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.18.6 |
upgradeRemoveReleaseThis object takes a release version as its value. Setting this object will delete the specified release. The current running release cannot be removed. This object always returns a zero-length string.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.18.7 |
upgradeStatusThe current download status.ro DownloadState .1.3.6.1.4.1.8603.1.2.1.1.18.8 |
upgradePctCompleteDownload progress expressed as percentage complete.ro INTEGER .1.3.6.1.4.1.8603.1.2.1.1.18.9 |
upgradeErrorReasonIf upgradeStatus reports failure, this object will contain the reason for the failure.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.18.10 |
rrIgmp OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1.1.19 |
igmpStateSet this value to turn the IGMP proxy on or off.rw OnOffState .1.3.6.1.4.1.8603.1.2.1.1.19.1 |
igmpUseBroadcastSet this to true(1) to use broadcast at the PHY layer for multicast.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.19.2 |
igmpUpstreamIntfUpstream interface for IGMP proxy.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.19.3 |
igmpQueryIntervalIGMP general query interval (in seconds).rw Unsigned32 .1.3.6.1.4.1.8603.1.2.1.1.19.4 |
igmpMaxQueryRespGroup timeout (in multiples of igmpQueryInterval).rw Unsigned32 .1.3.6.1.4.1.8603.1.2.1.1.19.5 |
igmpMaxMembersMaximum number of wireless terminals joined to any IGMP group.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.19.6 |
igmpProxyStatusIGMP proxy current status.ro OnOffState .1.3.6.1.4.1.8603.1.2.1.1.19.7 |
rrBhQos OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1.1.20 |
bhQosReconfigureSet to true(1) to reconfigure.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.20.1 |
bhQosAqmParamsActive Queue Management parameters.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.20.2 |
bhQosGroupTableThis table is used to configure QoS groups. SEQUENCE OF BhQosGroupEntry .1.3.6.1.4.1.8603.1.2.1.1.20.3 |
bhQosGroupEntry BhQosGroupEntry .1.3.6.1.4.1.8603.1.2.1.1.20.3.1 |
bhQosGroupIndexThe table index value.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.20.3.1.1 |
bhQosGroupNameA get on this object returns the group name. A new group can be added by first setting bhQosGroupStatus to createAndWait(5) to create the conceptual row. Then set this object with the group's name. Finally, commit the value by setting bhQosGroupStatus to active(1).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.20.3.1.2 |
bhQosGroupStatusThis object is used to change the state of a conceptual row. Only active(1), createAndWait(5), and destroy(6) are supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.20.3.1.3 |
bhQosGroupClassTableThis table is used to configure QoS group classes. SEQUENCE OF BhQosGroupClassEntry .1.3.6.1.4.1.8603.1.2.1.1.20.4 |
bhQosGroupClassEntry BhQosGroupClassEntry .1.3.6.1.4.1.8603.1.2.1.1.20.4.1 |
bhQosGroupIndex1The group index associated with this class entry. This index can be used to look up the group name in the bhQosGroupTable.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.20.4.1.1 |
bhQosGroupClassIndexAn index value for this class entry.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.20.4.1.2 |
bhQosGroupClassNameA get on this object returns the group name. A new group can be added by first setting bhQosGroupClassStatus to createAndWait(5) to create the conceptual row. Then set this object with the group's name. Finally, commit the value by setting bhQosGroupClassStatus to active(1).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.20.4.1.3 |
bhQosGroupClassStatusThis object is used to change the state of a conceptual row. Only active(1), createAndWait(5), and destroy(6) are supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.20.4.1.4 |
bhQosGroupFilterTableThis table is used to configure QoS group filters. SEQUENCE OF BhQosGroupFilterEntry .1.3.6.1.4.1.8603.1.2.1.1.20.5 |
bhQosGroupFilterEntry BhQosGroupFilterEntry .1.3.6.1.4.1.8603.1.2.1.1.20.5.1 |
bhQosGroupIndex2The group index associated with this filter entry. This index can be used to look up the group name in the bhQosGroupTable.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.20.5.1.1 |
bhQosGroupFilterIndexAn index value for this filter entry.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.20.5.1.2 |
bhQosGroupFilterNameA get on this object returns the group name. A new group can be added by first setting bhQosGroupFilterStatus to createAndWait(5) to create the conceptual row. Then set this object with the group's name. Finally, commit the value by setting bhQosGroupFilterStatus to active(1).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.20.5.1.3 |
bhQosGroupFilterStatusThis object is used to change the state of a conceptual row. Only active(1), createAndWait(5), and destroy(6) are supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.20.5.1.4 |
bhQosGroupMarkerTableThis table is used to configure QoS group markers. SEQUENCE OF BhQosGroupMarkerEntry .1.3.6.1.4.1.8603.1.2.1.1.20.6 |
bhQosGroupMarkerEntry BhQosGroupMarkerEntry .1.3.6.1.4.1.8603.1.2.1.1.20.6.1 |
bhQosGroupIndex3The group index associated with this marker entry. This index can be used to look up the group name in the bhQosGroupTable.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.20.6.1.1 |
bhQosGroupMarkerIndexAn index value for this marker entry.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.1.20.6.1.2 |
bhQosGroupMarkerNameA get on this object returns the group name. A new group can be added by first setting bhQosGroupMarkerStatus to createAndWait(5) to create the conceptual row. Then set this object with the group's name. Finally, commit the value by setting bhQosGroupMarkerStatus to active(1).rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.20.6.1.3 |
bhQosGroupMarkerStatusThis object is used to change the state of a conceptual row. Only active(1), createAndWait(5), and destroy(6) are supported.rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.1.20.6.1.4 |
rrBaseBandUnit OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1.2 |
bbuTableTable of Base Band Units. SEQUENCE OF BbuEntry .1.3.6.1.4.1.8603.1.2.1.2.4 |
bbuEntryBase Band Unit table entry. BbuEntry .1.3.6.1.4.1.8603.1.2.1.2.4.1 |
bbuIdBase Band Unit ID.ro INTEGER .1.3.6.1.4.1.8603.1.2.1.2.4.1.1 |
bbuIpAddressBBU IP address.rw IpAddress .1.3.6.1.4.1.8603.1.2.1.2.4.1.2 |
bbuAdminStateBBU administrative state.rw AdminState .1.3.6.1.4.1.8603.1.2.1.2.4.1.3 |
bbuOperStateA GET on this object will return the BBU's operational state. Valid values for a SET are: active(1) set BBU to active state disabledStandby(6) set BBU to disabled/standby staterw BbuState .1.3.6.1.4.1.8603.1.2.1.2.4.1.4 |
bbuResetSet to true(1) to reset the BBU.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.2.4.1.5 |
bbuHwVerBBU hardware version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.2.4.1.6 |
bbuBootromVerBBU bootrom version.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.2.4.1.7 |
rrMobile OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1.4 |
rrMobileNumTotal number of active mobile users on the base station. An active user is a mobile which has been authenticated and has acquired an IP address (L3 registered).ro INTEGER .1.3.6.1.4.1.8603.1.2.1.4.1 |
mobileTableTable of mobile users. SEQUENCE OF MobileEntry .1.3.6.1.4.1.8603.1.2.1.4.3 |
mobileEntryMobile user table entry. MobileEntry .1.3.6.1.4.1.8603.1.2.1.4.3.1 |
mobileEuiMobile EUI64.ro MobileEui .1.3.6.1.4.1.8603.1.2.1.4.3.1.1 |
mobileScrubSet this value to true(1) to scrub the mobile from the system.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.4.3.1.2 |
mobileSectorTableTable of mobile users as seen by a particular sector. SEQUENCE OF MobileSectorEntry .1.3.6.1.4.1.8603.1.2.1.4.4 |
mobileSectorEntryMobile user as seen by a particular sector table entry. MobileSectorEntry .1.3.6.1.4.1.8603.1.2.1.4.4.1 |
mobileSectorEuiMobile EUI64.ro MobileEui .1.3.6.1.4.1.8603.1.2.1.4.4.1.1 |
mobileSectorIdThe sector Id.ro INTEGER .1.3.6.1.4.1.8603.1.2.1.4.4.1.2 |
mobileSectorMipLifetimeThe Mobile IP lifetime.ro Unsigned32 .1.3.6.1.4.1.8603.1.2.1.4.4.1.3 |
mobileSectorNaiThe Network Access Identifier used to uniquely identify the mobile node. Typically the NAI is of the form user@realm.com.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.4.4.1.4 |
mobileSectorL2StateThe L2 access control state.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.4.4.1.5 |
mobileSectorQosProfileThe L2 access control QoS profile.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.4.4.1.6 |
mobileSectorAaaIpThe AAA assigned Home IP address.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.4.4.1.7 |
mobileSectorAaaHaThe AAA assigned Home Agent IP address.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.4.4.1.8 |
mobileSectorActiveIpThe Home Agent assigned Home IP address.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.4.4.1.9 |
mobileSectorActiveHaThe MCU assigned Home Agent IP address.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.4.4.1.10 |
mobileSectorFramedMtuSizeThe MTU frame size.ro Unsigned32 .1.3.6.1.4.1.8603.1.2.1.4.4.1.11 |
mobileSectorMipAuthAlgThe authentication algorithmro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.4.4.1.12 |
mobileSectorNaiRegDoes the mobile MIP register with NAI?ro Unsigned32 .1.3.6.1.4.1.8603.1.2.1.4.4.1.13 |
mobileSectorIdleTimeoutLayer 2/3 cipher key timeout.ro Unsigned32 .1.3.6.1.4.1.8603.1.2.1.4.4.1.14 |
mobileSectorAcntIntervalRADIUS accounting update interval (seconds).ro Unsigned32 .1.3.6.1.4.1.8603.1.2.1.4.4.1.15 |
mobileSectorVendorIdMobile vendor ID.ro Unsigned32 .1.3.6.1.4.1.8603.1.2.1.4.4.1.16 |
mobileSectorVersionThe mobile version information.ro OCTET STRING .1.3.6.1.4.1.8603.1.2.1.4.4.1.17 |
mobileActiveTableThis table displays the active mobiles connected on each sector. SEQUENCE OF MobileActiveEntry .1.3.6.1.4.1.8603.1.2.1.4.5 |
mobileActiveEntry MobileActiveEntry .1.3.6.1.4.1.8603.1.2.1.4.5.1 |
mobileActiveSectorIdSector ID.ro INTEGER .1.3.6.1.4.1.8603.1.2.1.4.5.1.1 |
mobileActiveIndexActive mobile index.ro INTEGER .1.3.6.1.4.1.8603.1.2.1.4.5.1.2 |
mobileActiveEuiThe mobile's EUI-64.ro MobileEui .1.3.6.1.4.1.8603.1.2.1.4.5.1.4 |
mobileActiveIpAddrMobile IP address.ro IpAddress .1.3.6.1.4.1.8603.1.2.1.4.5.1.8 |
mobileActiveVersionMobile version number.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.4.5.1.9 |
rrBackHaulUnit OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1.5 |
wanBladeTableWAN blade table. SEQUENCE OF WanBladeEntry .1.3.6.1.4.1.8603.1.2.1.5.1 |
wanBladeEntryWAN blade table entry. WanBladeEntry .1.3.6.1.4.1.8603.1.2.1.5.1.1 |
wanBladeIdThe WAN blade identifier.ro INTEGER .1.3.6.1.4.1.8603.1.2.1.5.1.1.1 |
wanBladeValidIndicates if this WAN blade is valid.rwdeprecated TruthValue (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.5.1.1.2 |
wanPortTableWAN port table. SEQUENCE OF WanPortEntry .1.3.6.1.4.1.8603.1.2.1.5.2 |
wanPortEntryWAN port table entry. WanPortEntry .1.3.6.1.4.1.8603.1.2.1.5.2.1 |
wanPortBladeIdThe WAN blade identifier.ro INTEGER .1.3.6.1.4.1.8603.1.2.1.5.2.1.1 |
wanPortIdThe WAN port identifier.ro INTEGER .1.3.6.1.4.1.8603.1.2.1.5.2.1.2 |
wanTxBufferSizeSize of each Tx buffer (bytes).rw INTEGER .1.3.6.1.4.1.8603.1.2.1.5.2.1.3 |
wanTxBuffersNumber of trasmit buffers.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.5.2.1.4 |
wanTxMaxPendingMaximum pending Tx packets.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.5.2.1.5 |
wanRxBufferSizeSize of each Rx buffer (bytes).rw INTEGER .1.3.6.1.4.1.8603.1.2.1.5.2.1.6 |
wanRxBuffersNumber of receive buffers.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.5.2.1.7 |
wanMaxRxFrameSizeMaximum size of Rx frame.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.5.2.1.8 |
wanLoopbackLoopback mode.rw WanLoopbackMode .1.3.6.1.4.1.8603.1.2.1.5.2.1.9 |
wanCrcModeCRC mode.rw WanCrcMode .1.3.6.1.4.1.8603.1.2.1.5.2.1.10 |
wanClockingDS-1 clocking.rw WanClock .1.3.6.1.4.1.8603.1.2.1.5.2.1.11 |
wanDataRateDS-0 rate.rw WanBitRate .1.3.6.1.4.1.8603.1.2.1.5.2.1.12 |
wanCodingDS-1 line coding.rw WanLineCoding .1.3.6.1.4.1.8603.1.2.1.5.2.1.13 |
wanFramingDS-1 line mode.rw WanLineMode .1.3.6.1.4.1.8603.1.2.1.5.2.1.14 |
wanRxGainDS-1 Rx equalizer gain.rw WanLineGain .1.3.6.1.4.1.8603.1.2.1.5.2.1.15 |
wanLboDS-1 line build out.rw WanLineBuildOut .1.3.6.1.4.1.8603.1.2.1.5.2.1.16 |
wanPolarityDS-1 data polarity mode.rw WanPolarity .1.3.6.1.4.1.8603.1.2.1.5.2.1.17 |
wanPulseDS-1 pulse density enforcer.rw WanFeatureState .1.3.6.1.4.1.8603.1.2.1.5.2.1.18 |
wanJitterDS-1 jitter attenuator.rw WanFeatureState .1.3.6.1.4.1.8603.1.2.1.5.2.1.19 |
wanJitterSideDS-1 jitter attenuator.rw WanJitterAttenuation .1.3.6.1.4.1.8603.1.2.1.5.2.1.20 |
wanChan1to8DS-0's 1-8 enabled.rw WanFeatureState .1.3.6.1.4.1.8603.1.2.1.5.2.1.21 |
wanChan9to16DS-0's 9-16 enabled.rw WanFeatureState .1.3.6.1.4.1.8603.1.2.1.5.2.1.22 |
wanChan17to24DS-0's 17-24 enabled.rw WanFeatureState .1.3.6.1.4.1.8603.1.2.1.5.2.1.23 |
wanChan25to32DS-0's 25-32 enabled.rw WanFeatureState .1.3.6.1.4.1.8603.1.2.1.5.2.1.24 |
wanPortValidIndicates if this port is valid.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.5.2.1.25 |
mlppp OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1.5.3 |
mlpppReconfigureSet to true to reconfigure MLPPP.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.5.3.1 |
bundleTableMLPPP bundle table. SEQUENCE OF BundleEntry .1.3.6.1.4.1.8603.1.2.1.5.3.2 |
bundleEntryMLPPP bundle table entry. BundleEntry .1.3.6.1.4.1.8603.1.2.1.5.3.2.1 |
bundleIdThe MLPPP bundle identifier.ro INTEGER .1.3.6.1.4.1.8603.1.2.1.5.3.2.1.1 |
bundleValidIndicates if this MLPPP bundle is valid.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.5.3.2.1.2 |
bundleMultilinkIndicates if multilink is enabled.rw WanFeatureState .1.3.6.1.4.1.8603.1.2.1.5.3.2.1.3 |
bundleCompressionIndicates if multilink is enabled.rw WanFeatureState .1.3.6.1.4.1.8603.1.2.1.5.3.2.1.4 |
bundleInterfaceNetgraph interface name. Valid values are 'ppp0' or 'ppp1'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.5.3.2.1.5 |
bundleLinkChapIndicates if CHAP Authentication is enabled.rw WanFeatureState .1.3.6.1.4.1.8603.1.2.1.5.3.2.1.6 |
bundleLinkPapIndicates if PAP Authentication is enabled.rw WanFeatureState .1.3.6.1.4.1.8603.1.2.1.5.3.2.1.7 |
bundleLinkMruPPP maximum receive unit (int bytes).rw INTEGER .1.3.6.1.4.1.8603.1.2.1.5.3.2.1.8 |
bundleLinkMtuPPP maximum trasmit unit (int bytes).rw INTEGER .1.3.6.1.4.1.8603.1.2.1.5.3.2.1.9 |
bundleLinkKeepAliveIntvlPPP LCP keep-alive interval.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.5.3.2.1.10 |
bundleLinkKeepAliveDurPPP LCP keep-alive duration.rw INTEGER .1.3.6.1.4.1.8603.1.2.1.5.3.2.1.11 |
bundleLinkAcfCompPPP Address/Control Field compression.rw WanFeatureState .1.3.6.1.4.1.8603.1.2.1.5.3.2.1.12 |
bundleLinkProtoCompPPP Protocol Field compression.rw WanFeatureState .1.3.6.1.4.1.8603.1.2.1.5.3.2.1.13 |
bundleIfaceOnDemandOn demand dialing.rw WanFeatureState .1.3.6.1.4.1.8603.1.2.1.5.3.2.1.14 |
bundleIfaceIdleTimeoutPPP idle timeout (0 means disabled).rw INTEGER .1.3.6.1.4.1.8603.1.2.1.5.3.2.1.15 |
bundleIpcpVjCompTCP VJ compression.rw WanFeatureState .1.3.6.1.4.1.8603.1.2.1.5.3.2.1.16 |
bundleIpcpDnsDomain Name Server.rw IpAddress .1.3.6.1.4.1.8603.1.2.1.5.3.2.1.17 |
bundleIpcpNbnsNetbios Name Server.rw IpAddress .1.3.6.1.4.1.8603.1.2.1.5.3.2.1.18 |
bundleIpcpLocalIpAddrLocal MLPPP IP address. The format of this object is '<ip address>/<mask>'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.5.3.2.1.19 |
bundleIpcpPeerIpAddrPeer MLPPP IP address. The format of this object is '<ip address>/<mask>'.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.5.3.2.1.20 |
bundleRouteHandlingMLPPP handling of supernetting of MLPPP interfaces.rwdeprecated RouteHandling .1.3.6.1.4.1.8603.1.2.1.5.3.2.1.21 |
wanlinksTableWAN links table. SEQUENCE OF WanlinksEntry .1.3.6.1.4.1.8603.1.2.1.5.3.3 |
wanlinksEntryWAN links table entry. WanlinksEntry .1.3.6.1.4.1.8603.1.2.1.5.3.3.1 |
wanlinksBundleIdThe WAN links bundle identifier.ro INTEGER .1.3.6.1.4.1.8603.1.2.1.5.3.3.1.1 |
wanlinksIdThe WAN link identifier.ro INTEGER .1.3.6.1.4.1.8603.1.2.1.5.3.3.1.2 |
wanlinksInBundleIndicates if wanlinks are in the bundle.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.5.3.3.1.3 |
ifaceRouteTableBundle interface routing table.deprecated SEQUENCE OF IfaceRouteEntry .1.3.6.1.4.1.8603.1.2.1.5.3.4 |
ifaceRouteEntryBundle interface route entry.deprecated IfaceRouteEntry .1.3.6.1.4.1.8603.1.2.1.5.3.4.1 |
ifaceRtBundleIdThe bundle identifier.rodeprecated INTEGER .1.3.6.1.4.1.8603.1.2.1.5.3.4.1.1 |
ifaceRouteIdThe bundle interface route identifier.rodeprecated INTEGER .1.3.6.1.4.1.8603.1.2.1.5.3.4.1.2 |
ifaceRouteThe interface route. The format of this object is '<ip address>/<mask>'.rwdeprecated DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.1.5.3.4.1.3 |
rrSector OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.1.10 |
sectorNumNumber of sectors. A value of 1 implies that the system is not-sectorized (omnidirectional).ro INTEGER .1.3.6.1.4.1.8603.1.2.1.10.1 |
sectorTableTable of sectors. SEQUENCE OF SectorEntry .1.3.6.1.4.1.8603.1.2.1.10.2 |
sectorEntrySector table entry. SectorEntry .1.3.6.1.4.1.8603.1.2.1.10.2.1 |
sectorIdThe sector identifier.ro INTEGER .1.3.6.1.4.1.8603.1.2.1.10.2.1.1 |
sectorBbuThe Base Band Unit handling this sector.ro INTEGER .1.3.6.1.4.1.8603.1.2.1.10.2.1.2 |
rrAlarms OBJECT IDENTIFIER .1.3.6.1.4.1.8603.1.2.10 |
alarmTableThis is a table of active alarms. SEQUENCE OF AlarmEntry .1.3.6.1.4.1.8603.1.2.10.1 |
alarmEntry AlarmEntry .1.3.6.1.4.1.8603.1.2.10.1.1 |
alarmIndexThe alarm index.ro INTEGER .1.3.6.1.4.1.8603.1.2.10.1.1.1 |
alarmNameA brief description of the alarm.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.8603.1.2.10.1.1.2 |
alarmSeverityThe alarm severity level.ro AlarmSeverity .1.3.6.1.4.1.8603.1.2.10.1.1.3 |
alarmMoTypeThe managed object associated which generated this alarm.ro MoType .1.3.6.1.4.1.8603.1.2.10.1.1.4 |
alarmMoIdThe managed object instance identifier.ro INTEGER .1.3.6.1.4.1.8603.1.2.10.1.1.5 |
alarmSectorThe sector which generated the alarm, if applicable.ro INTEGER .1.3.6.1.4.1.8603.1.2.10.1.1.6 |
alarmTimeThe time at which the alarm was generated. This value is expressed in seconds since 00:00:00 UTC, January 1, 1970 (see time(2)).rodeprecated TimeTicks (SNMPv2-SMI) .1.3.6.1.4.1.8603.1.2.10.1.1.7 |
alarmTimestampThe time at which the alarm was generated. This value is expressed in seconds since 00:00:00 UTC, January 1, 1970 (see time(2)).ro INTEGER .1.3.6.1.4.1.8603.1.2.10.1.1.8 |
oem OBJECT IDENTIFIER .1.3.6.1.4.1.8603.3 |