F3-BFD-MIB
Imported Objects
Objects
29 total| Object Name |
|---|
f3BfdMIBThis module defines the Ethernet Service Manager MIB defitinions
used by the F3 (FSP150CM/CC) product lines.
Copyright (C) ADVA Optical Networking. MODULE-IDENTITY .1.3.6.1.4.1.2544.1.12.38 |
f3BfdConfigObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.38.1 |
bfdSessExtTableThis table has list of entries with which FSPNM can associate some
information in the form of name-value pairs.
NOTE: This table is for FSPNM use only. SEQUENCE OF BfdSessExtEntry .1.3.6.1.4.1.2544.1.12.38.1.1 |
bfdSessExtEntryThe conceptual row in bfdSessExtTable. BfdSessExtEntry .1.3.6.1.4.1.2544.1.12.38.1.1.1 |
bfdSessExtInnerVlanControlThis object allows to specify whether enable inner Vlan Tag.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.38.1.1.1.1 |
bfdSessExtInnerVlanIdThis object allows to specify inner VlanId.rw VlanId (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.38.1.1.1.2 |
bfdSessExtInnerVlanPriThis object allows to specify inner Vlan Priority.rw VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.38.1.1.1.3 |
bfdSessExtOuterVlanControlThis object allows to specify whether enable outer Vlan Tag.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.38.1.1.1.4 |
bfdSessExtOuterVlanIdThis object allows to specify outer VlanId.rw VlanId (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.38.1.1.1.5 |
bfdSessExtOuterVlanPriThis object allows to specify outer Vlan Priority.rw VlanPriority (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.38.1.1.1.6 |
bfdSessExtIpPriThis object allows to specify IP DSCP value.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.38.1.1.1.7 |
bfdSessExtIpGatewayThis object allows to specify IP gateway.rw IpAddress .1.3.6.1.4.1.2544.1.12.38.1.1.1.8 |
bfdSessExtAdminStateThis object represents the Administrative State of the BFD session.rw AdminState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.38.1.1.1.9 |
bfdSessExtOperationalStateThis object represents the Operational State of the BFD session.ro OperationalState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.38.1.1.1.10 |
bfdSessExtSecondaryStateThis object represents the Secondary State of the BFD session.ro SecondaryState (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.38.1.1.1.11 |
bfdSessExtNegRxIntervalThis object represents negatiated recieve direction interval of the BFD session.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.38.1.1.1.12 |
bfdSessExtAliasThis object represents the alias of the BFD session.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.38.1.1.1.13 |
bfdSessExtActionThis object allows to perform some action on the bfd session.rw BfdSessPerfAction .1.3.6.1.4.1.2544.1.12.38.1.1.1.14 |
f3BfdIpIfMemberTableA list of entries for the BFD Traffic Ip Interface member. SEQUENCE OF F3BfdIpIfMemberEntry .1.3.6.1.4.1.2544.1.12.38.1.2 |
f3BfdIpIfMemberEntryA conceptual row in the f3BfdIpIfMemberTable. F3BfdIpIfMemberEntry .1.3.6.1.4.1.2544.1.12.38.1.2.1 |
f3BfdIpIfMemberObjectThis object describes the traffic ip interface. VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.38.1.2.1.1 |
f3BfdIpIfMemberStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.38.1.2.1.2 |
f3BfdIpIfMemberRowStatusThe status of this row.
An entry MUST NOT exist in the active state unless all
objects in the entry have an appropriate value, as described
in the description clause for each writable object.
The values of f3BfdIpIfMemberRowStatus supported are
createAndGo(4) and destroy(6). All mandatory attributes
must be specified in a single SNMP SET request with
f3BfdIpIfMemberRowStatus value as createAndGo(4).
Upon successful row creation, this object has a
value of active(1).
The f3BfdIpIfMemberRowStatus object may be modified if
the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.38.1.2.1.3 |
f3L3TrafficIPInterfaceExtBfdTableA list of entries corresponding to traffic ip interface for configuration purposes. SEQUENCE OF F3L3TrafficIPInterfaceExtBfdEntry .1.3.6.1.4.1.2544.1.12.38.1.3 |
f3L3TrafficIPInterfaceExtBfdEntryA conceptual row in the f3L3TrafficIPInterfaceExtBfdTable. F3L3TrafficIPInterfaceExtBfdEntry .1.3.6.1.4.1.2544.1.12.38.1.3.1 |
f3L3TrafficIPInterfaceExtBfdObjectThis object describes the BFD object OID.ro VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.38.1.3.1.1 |
f3BfdConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.38.2 |
f3BfdCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.38.2.1 |
f3BfdGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.38.2.2 |
More MIBs from ADVA AG Optical Networking
Browse all ADVA AG Optical NetworkingMIBs →SNMP MIB module
The ADVA-FSPR7-MIB module enables SNMP-based monitoring and management of ADVA FSP 7000 optical transport network elements, specifically tracking optical channel performance, signal quality metrics, and interface status. It facilitates the collection of critical telemetry data such as optical power levels, bit error rates, and alarm states for the ADVA FSPR7 series equipment.
The ADVA-FSPR7-PM-MIB enables SNMP-based performance monitoring of ADVA FSPR 7000 optical transport network equipment, specifically tracking traffic statistics, error counters, and signal quality metrics for SDH/SONET and OTN interfaces.
The CM-FACILITY-MIB module enables SNMP-based monitoring of facility-level environmental and power infrastructure metrics, such as temperature, humidity, and power supply status, specifically for ADVA Optical Networking's F3 (FSP150CM/CC) product lines.
The CM-PERFORMANCE-MIB enables ADVA Optical Networking FSP150CM/CC platforms to expose optical performance monitoring counters, including signal power, bit error rates, and latency metrics, via the Simple Network Management Protocol. These definitions facilitate the collection of physical layer statistics required for fault detection and service level agreement verification in F3 product line deployments.
SNMP MIB module