F3-AMP-MIB
AI MIB Summary
The F3-AMP-MIB module enables SNMP-based monitoring and configuration of Automatic Management Provisioning parameters for ADVA Optical Networking's FSP150CM and FSP150CC product lines. It facilitates the retrieval of provisioning status, service activation states, and automated network element configuration metrics specific to these optical transport platforms.
This module defines the Automatic Management Provisioning MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking.
Main OID:
f3AMPMIB.1.3.6.1.4.1.2544.1.12.24
58
Objects
Active
Status
6
Dependencies
Imported Objects
Objects
58 total| Object Name |
|---|
f3AMPMIBThis module defines the Automatic Management Provisioning MIB definitions used by the F3 (FSP150CM/CC) product lines. Copyright (C) ADVA Optical Networking. MODULE-IDENTITY .1.3.6.1.4.1.2544.1.12.24 |
f3AmpConfigObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.24.1 |
f3AmpConfigTableA list of entries corresponding to Automatic Management Provisioning configuration instance for configuration purposes. SEQUENCE OF F3AmpConfigEntry .1.3.6.1.4.1.2544.1.12.24.1.1 |
f3AmpConfigEntryA conceptual row in the f3AmpConfigTable. F3AmpConfigEntry .1.3.6.1.4.1.2544.1.12.24.1.1.1 |
f3AmpConfigIndexAn integer index value used to uniquely identify this AMP Config within the System. Integer32 .1.3.6.1.4.1.2544.1.12.24.1.1.1.1 |
f3AmpConfigRoleConfigures AMP instance to be either Client or Server.rw AMPRole .1.3.6.1.4.1.2544.1.12.24.1.1.1.2 |
f3AmpConfigProtocolConfigures protocol over which AMP message will be transported.rw AMPProtocol .1.3.6.1.4.1.2544.1.12.24.1.1.1.3 |
f3AmpConfigEnabledEnables or Disables AMP on a Port.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.24.1.1.1.4 |
f3AmpConfigPortPort on which AMP Server or Client will operate. This port will transmit/receive AMP messages. The AMP can operate on Access Ports and Network Port and f3AmpConfigPort shall point to either cmEthernetAccPortIndex or cmEthernetNetPortIndex.rw VariablePointer (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.24.1.1.1.5 |
f3AmpConfigStatusThe Status of AMP.ro AMPStatus .1.3.6.1.4.1.2544.1.12.24.1.1.1.6 |
f3AmpConfigRemSysNameWhen f3AmpConfigRole is 'server' this object specifies sysName which is sent in a AMP message to be configfured on a AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the sysName value which was received from the AMP Server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.24.1.1.1.7 |
f3AmpConfigRemSysIpAddrWhen f3AmpConfigRole is 'server' this object specifies System IP address which is sent in a AMP message to be configfured on a AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the System IP address value which was received from the AMP Server.rw IpAddress .1.3.6.1.4.1.2544.1.12.24.1.1.1.8 |
f3AmpConfigRemSysIpMaskWhen f3AmpConfigRole is 'server' this object specifies System IP mask which is sent in a AMP message to be configfured on a AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the System IP mask value which was received from the AMP Server.rw IpAddress .1.3.6.1.4.1.2544.1.12.24.1.1.1.9 |
f3AmpConfigRemSysDefGatewayWhen f3AmpConfigRole is 'server' this object specifies System Default Gateway which is sent in a AMP message to be configfured on a AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the System Default Gateway value which was received from the AMP Server.rw IpAddress .1.3.6.1.4.1.2544.1.12.24.1.1.1.10 |
f3AmpConfigRemSysSNMPV1IfNameWhen f3AmpConfigRole is 'server' this object specifies System SNMPV1 Interface Name which is sent in a AMP message to be configfured on a AMP Client device. When f3AmpConfigRole is 'client' this object shows the System SNMPV1 Interface Name value which was received from the AMP Server.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.24.1.1.1.11 |
f3AmpConfigRemSysSrcIpAddrTypeWhen f3AmpConfigRole is 'server' this object specifies System Source IP Address type which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the System Source IP Address Type value which was received from the AMP Server.ro IpSourceAddrType (CM-IP-MIB) .1.3.6.1.4.1.2544.1.12.24.1.1.1.12 |
f3AmpConfigRemSysSrcIpAddrIfNameWhen f3AmpConfigRole is 'server' this object specifies System Source IP Interface name sent in an AMP message to be configured on an AMP Client device. When f3AmpConfigRole is 'client' this object shows the SystemSource IP Interface value which was received from the AMP Server.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.24.1.1.1.13 |
f3AmpConfigRemTunnelIndexWhen f3AmpConfigRole is 'server' this object specifies index of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the index of a Management Tunnel which was received from the AMP Server.rw Integer32 .1.3.6.1.4.1.2544.1.12.24.1.1.1.14 |
f3AmpConfigRemTunnelNameWhen f3AmpConfigRole is 'server' this object specifies a Management Tunnel name which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the Management Tunnel name which was received from the AMP Server.rw DisplayString (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.24.1.1.1.15 |
f3AmpConfigRemTunnelTypeWhen f3AmpConfigRole is 'server' this object specifies a Management Tunnel type value which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the Management Tunnel type value which was received from the AMP Server.rw IpManagementTunnelType (CM-IP-MIB) .1.3.6.1.4.1.2544.1.12.24.1.1.1.16 |
f3AmpConfigRemTunnelIpAddrWhen f3AmpConfigRole is 'server' this object specifies IP Address of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the IP Address of a Management Tunnel which was received from the AMP Server.rw IpAddress .1.3.6.1.4.1.2544.1.12.24.1.1.1.17 |
f3AmpConfigRemTunnelIpMaskWhen f3AmpConfigRole is 'server' this object specifies IP Mask of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the IP Mask of a Management Tunnel which was received from the AMP Server.rw IpAddress .1.3.6.1.4.1.2544.1.12.24.1.1.1.18 |
f3AmpConfigRemTunnelVlanIdWhen f3AmpConfigRole is 'server' this object specifies VlanId of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the VlanId of a Management Tunnel which was received from the AMP Server.rw VlanId (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.24.1.1.1.19 |
f3AmpConfigRemTunnelSVlanIdWhen f3AmpConfigRole is 'server' this object specifies S-TAG VlanId of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the S-TAG VlanId of a Management Tunnel which was received from the AMP Server.rw VlanId (CM-COMMON-MIB) .1.3.6.1.4.1.2544.1.12.24.1.1.1.20 |
f3AmpConfigRemTunnelSVlanIdEnabledWhen f3AmpConfigRole is 'server' this object specifies a Management Tunnel S-TAG VlanId Enable value which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the a Management Tunnel S-TAG VlanId Enabled value which was received from the AMP Server.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.24.1.1.1.21 |
f3AmpConfigRemTunnelRip2PktsEnabledWhen f3AmpConfigRole is 'server' this object specifies a Management Tunnel RIP2 Packates Enabled value which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the a Management Tunnel RIP2 Packates Enabled value which was received from the AMP Server.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.24.1.1.1.22 |
f3AmpConfigRemTunnelCOSWhen f3AmpConfigRole is 'server' this object specifies COS of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the COS of a Management Tunnel which was received from the AMP Server.rw Integer32 .1.3.6.1.4.1.2544.1.12.24.1.1.1.23 |
f3AmpConfigRemTunnelCIRWhen f3AmpConfigRole is 'server' this object specifies CIR of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the CIR of a Management Tunnel which was received from the AMP Server.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.24.1.1.1.24 |
f3AmpConfigRemTunnelEIRWhen f3AmpConfigRole is 'server' this object specifies EIR of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the EIR of a Management Tunnel which was received from the AMP Server.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.24.1.1.1.25 |
f3AmpConfigRemTunnelBufferSizeWhen f3AmpConfigRole is 'server' this object specifies Buffer Size of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the Buffer Size of a Management Tunnel which was received from the AMP Server.rw Unsigned32 .1.3.6.1.4.1.2544.1.12.24.1.1.1.26 |
f3AmpConfigRemTunnelEncapTypeWhen f3AmpConfigRole is 'server' this object specifies Encapsulation Type of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the Encapsulation Type of a Management Tunnel which was received from the AMP Server.rw IpManagementTunnelEncapsulationType (CM-IP-MIB) .1.3.6.1.4.1.2544.1.12.24.1.1.1.27 |
f3AmpConfigRemTunnelMtuWhen f3AmpConfigRole is 'server' this object specifies MTU of a Management Tunnel which is sent in an AMP message to be configfured on an AMP Client device. When f3AmpConfigRole is 'client' this object is read-only and shows the MTU of a Management Tunnel which was received from the AMP Server.rw Integer32 .1.3.6.1.4.1.2544.1.12.24.1.1.1.28 |
f3AmpConfigActionThis object may be used to initiate user action on this AMP Config instance.rw AMPConfigAction .1.3.6.1.4.1.2544.1.12.24.1.1.1.29 |
f3AmpConfigStorageTypeThe type of storage configured for this entry.rw StorageType (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.24.1.1.1.30 |
f3AmpConfigRowStatusThe status of this row. An entry MUST NOT exist in the active state unless all objects in the entry have an appropriate value, as described in the description clause for each writable object. The values of f3AmpConfigRowStatus supported are createAndGo(4) and destroy(6). All mandatory attributes must be specified in a single SNMP SET request with neRowStatus value as createAndGo(4). Upon successful row creation, this object has a value of active(1). The f3AmpConfigRowStatus object may be modified if the associated instance of this object is equal to active(1).rw RowStatus (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.24.1.1.1.31 |
f3AmpStatsObjects OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.24.2 |
f3AmpStatsTableA list of entries corresponding to Automatic Management Provisioning Statistics SEQUENCE OF F3AmpStatsEntry .1.3.6.1.4.1.2544.1.12.24.2.1 |
f3AmpStatsEntryA conceptual row in the f3AmpStatsTable. F3AmpStatsEntry .1.3.6.1.4.1.2544.1.12.24.2.1.1 |
f3AmpStatsProvDataTxThe number of Provisioning Data messages sent by AMP Server.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.24.2.1.1.1 |
f3AmpStatsProvDataRxThe number of Provisioning Data messages received by AMP Client.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.24.2.1.1.2 |
f3AmpStatsProvRequestTxThe number of Provisioning Request messages sent by AMP Client.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.24.2.1.1.3 |
f3AmpStatsProvRequestRxThe number of Provisioning Request received sent by AMP Server.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.24.2.1.1.4 |
f3AmpStatsConfigSuccessTxThe number of Configuration Success messages sent sent by AMP Client.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.24.2.1.1.5 |
f3AmpStatsConfigSuccessRxThe number of Configuration Success messages received by AMP Server.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.24.2.1.1.6 |
f3AmpStatsConfigFailTxThe number of Configuration Success messages received by AMP Client.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.24.2.1.1.7 |
f3AmpStatsConfigFailRxThe number of Configuration Success messages received by AMP Server.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.24.2.1.1.8 |
f3AmpStatsSpuriousMessageRxThe number of Spurious messages received by AMP Client or Serverro Unsigned32 .1.3.6.1.4.1.2544.1.12.24.2.1.1.9 |
f3AmpStatsTimeoutRxThe number of messages which were not received within the time out value. AMP Client can time out while waiting for Prov Data message. AMP Server can time out while waiting for Config Fail or Config Success message.ro Unsigned32 .1.3.6.1.4.1.2544.1.12.24.2.1.1.10 |
f3AmpStatsLastRxStatusLast received Configuration Status.ro AMPConfigStatus .1.3.6.1.4.1.2544.1.12.24.2.1.1.11 |
f3AmpStatsRxTimeStampTime of last received Configuration Status.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.24.2.1.1.12 |
f3AmpStatsLastTxStatusLast sent Configuration Status.ro AMPConfigStatus .1.3.6.1.4.1.2544.1.12.24.2.1.1.13 |
f3AmpStatsTxTimeStampTime of last sent Configuration Status.ro DateAndTime (SNMPv2-TC) .1.3.6.1.4.1.2544.1.12.24.2.1.1.14 |
f3AmpConformance OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.24.3 |
f3AmpCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.24.3.1 |
f3AmpComplianceDescribes the requirements for conformance to the F3-AMP-MIB compilance. Unknown .1.3.6.1.4.1.2544.1.12.24.3.1.1 |
f3AmpGroups OBJECT IDENTIFIER .1.3.6.1.4.1.2544.1.12.24.3.2 |
f3AmpConfigGroupA collection of objects used to manage the AMP Configuration. Unknown .1.3.6.1.4.1.2544.1.12.24.3.2.1 |
f3AmpStatsGroupA collection of objects used to manage the AMP Statistics. Unknown .1.3.6.1.4.1.2544.1.12.24.3.2.2 |