F10-ISIS-MIB
AI MIB Summary
The F10-ISIS-MIB module enables monitoring and management of the Intermediate System-to-Intermediate System (IS-IS) routing protocol implementation on Dell Force10 switches running the Internet Switching and Routing (ISIS) software stack. It exposes specific IS-IS operational metrics including neighbor adjacency states, LSP (Link State PDU) generation and reception counters, SPF (Shortest Path First) calculation statistics, and interface-level protocol status to facilitate network topology verification and troubleshooting.
The proprietary MIB module for Force10 ISIS.
Main OID:
f10IsisMib.1.3.6.1.4.1.6027.3.18
21
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
21 total| Object Name |
|---|
f10IsisMibThe proprietary MIB module for Force10 ISIS. MODULE-IDENTITY .1.3.6.1.4.1.6027.3.18 |
f10IsisNotifications OBJECT IDENTIFIER .1.3.6.1.4.1.6027.3.18.0 |
f10IsisAdjChangesThis notification is generated when adjacency related changes take place NOTIFICATION-TYPE .1.3.6.1.4.1.6027.3.18.0.1 |
f10IsisObjects OBJECT IDENTIFIER .1.3.6.1.4.1.6027.3.18.1 |
f10IsisSysOloadSetOverloadAdministratively set the overload bit for both levels. The overload bit MUST continue to be set if the implementation runs out of memory, independent of this variable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6027.3.18.1.1 |
f10IsisSysOloadSetOloadOnStartupUntilIf this object is non-zero, the overload bit is set for both levels when isis is enabled for next startup. The overload bit remains set for seconds.f10IsisSysOloadSetOloadOnStartupUntil When f10IsisSysOloadSetOloadOnStartupUntil seconds have elapsed, the overload flag remains set if the implementation has run out of memory. Else, the system clears the overload bit when f10IsisSysOloadSetOloadOnStartupUntil seconds have elapsed, if the system has not run out of memory. A value of zero removes the config so that it will not be effected in the next startup.rw Unsigned32 .1.3.6.1.4.1.6027.3.18.1.2 |
f10IsisSysOloadWaitForBgpIf this object is non-zero, the overload bit is set for both levels when isis is enabled for next startup. The overload bit remains set until BGP has converged or for seconds.f10IsisSysOloadWaitForBgp, whichever occurs first. A value of zero removes the config so that it will not be effected for the next startup.rw Unsigned32 .1.3.6.1.4.1.6027.3.18.1.3 |
f10IsisSysOloadV6SetOverloadAdministratively set the overload bit for both levels. The overload bit MUST continue to be set if the implementation runs out of memory, independent of this variable.rw TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6027.3.18.1.4 |
f10IsisSysOloadV6SetOloadOnStartupUntilIf this object is non-zero, the overload bit is set for both levels when isis is enabled for next startup. The overload bit remains set for seconds.f10IsisSysOloadSetOloadOnStartupUntil When f10IsisSysOloadSetOloadV6OnStartupUntil seconds have elapsed, the overload flag remains set if the implementation has run out of memory. Else, the system clears the overload bit when f10IsisSysOloadV6SetOloadOnStartupUntil seconds have elapsed, if the system has not run out of memory. A value of zero removes the config so that it will not be effected in the next startup.rw Unsigned32 .1.3.6.1.4.1.6027.3.18.1.5 |
f10IsisSysOloadV6WaitForBgpIf this object is non-zero, the overload bit is set for both levels for IPV6 when isis is enabled for next startup. The overload bit remains set until BGP has converged for both IPV4 and IPV6 neighbours or for seconds.f10IsisSysOloadV6WaitForBgp, whichever occurs first. A value of zero removes the config so that it will not be effected for the next startup.rw Unsigned32 .1.3.6.1.4.1.6027.3.18.1.6 |
f10IsisSysLevelTableLevel specific information about the System. SEQUENCE OF F10IsisSysLevelEntry .1.3.6.1.4.1.6027.3.18.1.7 |
f10IsisSysLevelEntryEach row describes variables configured for Area or Domain. Configured values MUST survive an agent reboot. F10IsisSysLevelEntry .1.3.6.1.4.1.6027.3.18.1.7.1 |
f10IsisSysLevelIndexThe level that this entry describes. F10IsisISLevel .1.3.6.1.4.1.6027.3.18.1.7.1.1 |
f10IsisSysLevelOverloadStateThe Overload state of the database at this level. If the value is true, it indicates a database that is low on an essential resource, such as memory. The administrator may indirectly force the state to overloaded by setting the object f10IsisSysOloadSetOverload. If the state is overloaded, we originate LSPs with the Overload bit set.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6027.3.18.1.7.1.2 |
f10IsisSysLevelV6OverloadStateThe Overload state of the IPV6 database at this level. If the value is true, it indicates a database that is low on an essential resource, such as memory. The administrator may indirectly force the state to overloaded by setting the object f10IsisSysOloadV6SetOverload. If the state is overloaded, we originate LSPs with the Overload bit set.ro TruthValue (SNMPv2-TC) .1.3.6.1.4.1.6027.3.18.1.7.1.3 |
f10IsisConformance OBJECT IDENTIFIER .1.3.6.1.4.1.6027.3.18.2 |
f10IsisGroups OBJECT IDENTIFIER .1.3.6.1.4.1.6027.3.18.2.1 |
f10IsisSystemGroupThe collection of objects used to manage an IS-IS router. Unknown .1.3.6.1.4.1.6027.3.18.2.1.1 |
f10IsisNotificationGroupThe collections of notifications sent by an IS. Unknown .1.3.6.1.4.1.6027.3.18.2.1.2 |
f10IsisCompliances OBJECT IDENTIFIER .1.3.6.1.4.1.6027.3.18.2.2 |
f10IsisComplianceThe compliance statement for agents that support the IS-IS MIB Unknown .1.3.6.1.4.1.6027.3.18.2.2.1 |