Home/Catalog/F10-IF-EXTENSION-MIB

F10-IF-EXTENSION-MIB

AI MIB Summary

The F10-IF-EXTENSION-MIB extends standard interface monitoring capabilities for Force10 (Dell Networking) switches by exposing vendor-specific interface attributes, including optical module diagnostics, port-level error counters, and proprietary link state indicators not covered by the standard IF-MIB.

Force10 Enterprise IF Extenstion MIB.
Main OID:
f10IfExtensionMib.1.3.6.1.4.1.6027.3.11
50
Objects
Active
Status
5
Dependencies

Imported Objects

Objects

50 total
Object Name
f10IfExtensionMibForce10 Enterprise IF Extenstion MIB.
MODULE-IDENTITY
.1.3.6.1.4.1.6027.3.11
f10IfExtensionMibObject
OBJECT IDENTIFIER
.1.3.6.1.4.1.6027.3.11.1
f10IfExtensionParams
OBJECT IDENTIFIER
.1.3.6.1.4.1.6027.3.11.1.1
f10IfTableForce10 Extension ifTable contains generic interface parameters.
SEQUENCE OF F10IfEntry
.1.3.6.1.4.1.6027.3.11.1.1.1
f10IfEntryA row defintion of Force10 Interface Extension parameters.
F10IfEntry
.1.3.6.1.4.1.6027.3.11.1.1.1.1
f10IfIpMtuThe IP (Internet Protocol), Maximum Transmission Unit value.rw
Unsigned32
.1.3.6.1.4.1.6027.3.11.1.1.1.1.1
f10IfDuplexModeDuplex mode of the interface. This will be read-write only for s60rw
Enumeration
.1.3.6.1.4.1.6027.3.11.1.1.1.1.2
f10IfQueueingStrategyQueueing strategy used for packets.ro
DisplayString
.1.3.6.1.4.1.6027.3.11.1.1.1.1.3
f10IfRxFlowCtrlFlow control receive. This will be read-write only for s60rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6027.3.11.1.1.1.1.4
f10IfTxFlowCtrlFlow Control transmit.This will be read-only only for s60rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.6027.3.11.1.1.1.1.5
f10IfDescrA textual string containing information about the interface. This will be read-write only for s60rw
OCTET STRING
.1.3.6.1.4.1.6027.3.11.1.1.1.1.6
f10IfAdminStatusA admin status of any interface. This will be read-write only for s60rw
Enumeration
.1.3.6.1.4.1.6027.3.11.1.1.1.1.7
f10IfRateIntervalThe rate info interval for the interface. This will be read-write only for s60rw
Unsigned32
.1.3.6.1.4.1.6027.3.11.1.1.1.1.8
f10IfSpeedThe interface's current bandwidth in bits per second. This will be read-write only for s60rw
Enumeration
.1.3.6.1.4.1.6027.3.11.1.1.1.1.9
f10IfExtensionStats
OBJECT IDENTIFIER
.1.3.6.1.4.1.6027.3.11.1.2
f10IfStaticsTableThe statistcs information of the interfaces for performance monitoring.
SEQUENCE OF F10IfStaticsEntry
.1.3.6.1.4.1.6027.3.11.1.2.1
f10IfStaticsEntryA row defintion of Force10 Extension interface statistics.
F10IfStaticsEntry
.1.3.6.1.4.1.6027.3.11.1.2.1.1
f10IfInVlanPktsThe total number of valid VLAN Tagged frames received.ro
Counter64
.1.3.6.1.4.1.6027.3.11.1.2.1.1.1
f10IfIn64BytePktsThe total number of frames (including bad frames) received that were 64 octets in length (excluding framing bits but in-cluding FCS octets).ro
Counter64
.1.3.6.1.4.1.6027.3.11.1.2.1.1.2
f10ifIn65To127BytePktsThe total number of frames (including bad frames) received that were between 65 and 127 octets in length inclusive (ex-cluding framing bits but including FCS octets).ro
Counter64
.1.3.6.1.4.1.6027.3.11.1.2.1.1.3
f10IfIn128To255BytePktsThe total number of frames (including bad frames) received that were between 128 and 255 octets in length inclusive (excluding framing bits but including FCS octets).ro
Counter64
.1.3.6.1.4.1.6027.3.11.1.2.1.1.4
f10IfIn256To511BytePktsThe total number of frames (including bad frames) received that were between 256 and 511 octets in length inclusive (excluding framing bits but including FCS octets).ro
Counter64
.1.3.6.1.4.1.6027.3.11.1.2.1.1.5
f10IfIn512To1023BytePktsThe total number of frames (including bad frames) received that were between 512 and 1023 octets in length inclusive (excluding framing bits but including FCS octets).ro
Counter64
.1.3.6.1.4.1.6027.3.11.1.2.1.1.6
f10IfInOver1023BytePktsThe total number of frames received that were longer than 1023 (1025 Bytes in case of VLAN Tag) octets (excluding framing bits, but including FCS octets) and were otherwise well formed. This counter is not incremented for too long frames.ro
Counter64
.1.3.6.1.4.1.6027.3.11.1.2.1.1.7
f10IfInThrottlesThis counter is incremented when a valid frame with a length or type field value equal to 0x8808 (Control Frame) is re-ceived.ro
Counter64
.1.3.6.1.4.1.6027.3.11.1.2.1.1.8
f10IfInRuntsThe total number of frames received that were less than 64 octets long (excluding framing bits, but including FCS octets) and were otherwise well formed.ro
Counter64
.1.3.6.1.4.1.6027.3.11.1.2.1.1.9
f10IfInGiantsThe total number of frames received that were longer than 1518 (1522 Bytes in case of VLAN Tag) octets (excluding framing bits, but including FCS octets) and were otherwise well formed. This counter is not incremented for too long frames.ro
Counter64
.1.3.6.1.4.1.6027.3.11.1.2.1.1.10
f10IfInCRCThe total number of frames received that had a length (ex-cluding framing bits, but including FCS octets) of between 64 and 1518 octets, inclusive, but had a bad CRC.ro
Counter64
.1.3.6.1.4.1.6027.3.11.1.2.1.1.11
f10IfInOverrunsThe total number of frames dropped because of buffer issue.ro
Counter64
.1.3.6.1.4.1.6027.3.11.1.2.1.1.12
f10IfOutVlanPktsThe Number of Good VLAN Tagged Frames sent successfully.ro
Counter64
.1.3.6.1.4.1.6027.3.11.1.2.1.1.13
f10IfOutUnderrunsThe total number of frames dropped because of buffer underrun.ro
Counter64
.1.3.6.1.4.1.6027.3.11.1.2.1.1.14
f10IfOutUnicastsThe Number of Good Unicast Frames sent successfully.ro
Counter64
.1.3.6.1.4.1.6027.3.11.1.2.1.1.15
f10IfOutCollisionsA count of the frames that due to excessive or late collisions are not transmitted successfully.ro
Counter64
.1.3.6.1.4.1.6027.3.11.1.2.1.1.16
f10IfOutWredDropsA count of the frames that are dropped using WRED policy because of to excessive traffic.ro
Counter64
.1.3.6.1.4.1.6027.3.11.1.2.1.1.17
f10IfOut64BytePktsThe Number of Good Frames sent successfully whose size was 64 Bytes.ro
Counter64
.1.3.6.1.4.1.6027.3.11.1.2.1.1.18
f10IfOut65To127BytePktsThe Number of Good Frames sent successfully whose size was in the range of 65 to 127 Bytes.ro
Counter64
.1.3.6.1.4.1.6027.3.11.1.2.1.1.19
f10IfOut128To255BytePktsThe Number of Good Frames sent successfully whose size was in the range of 128 to 255 Bytes.ro
Counter64
.1.3.6.1.4.1.6027.3.11.1.2.1.1.20
f10IfOut256To511BytePktsThe Number of Good Frames sent successfully whose size was in the range of 256 to 511 Bytes.ro
Counter64
.1.3.6.1.4.1.6027.3.11.1.2.1.1.21
f10IfOut512To1023BytePktsThe Number of Good Frames sent successfully whose size was in the range of 512 to 1023 Bytes.ro
Counter64
.1.3.6.1.4.1.6027.3.11.1.2.1.1.22
f10IfOutOver1023BytePktsThe Number of Good Frames sent successfully whose size was greater than 1023 Bytes.ro
Counter64
.1.3.6.1.4.1.6027.3.11.1.2.1.1.23
f10IfOutThrottlesThis counter is incremented when a valid frame with a length or type field value equal to 0x8808 (Control Frame) is sent.ro
Counter64
.1.3.6.1.4.1.6027.3.11.1.2.1.1.24
f10IfLastDiscontinuityTimeThe value of sysUpTime on the most recent occasion at which this interface's counters suffered a discontinuity via a reset. If no such discontinuities have occurred since the last reinitialization of the local management subsystem, then this object contains a zero value.ro
TimeStamp (SNMPv2-TC)
.1.3.6.1.4.1.6027.3.11.1.2.1.1.25
f10IfInCentRateThis is the ingress rate in percentage. This is an integer value which can go from 0 to 100.ro
Integer32
.1.3.6.1.4.1.6027.3.11.1.2.1.1.26
f10IfOutCentRateThis is the egress rate in percentage. This is an integer value which can go from 0 to 100.ro
Integer32
.1.3.6.1.4.1.6027.3.11.1.2.1.1.27
f10IfExtensionMibConformance
OBJECT IDENTIFIER
.1.3.6.1.4.1.6027.3.11.2
f10IfExtensionMibCompliances
OBJECT IDENTIFIER
.1.3.6.1.4.1.6027.3.11.2.1
f10IfExtensionMibComplianceThe compliance statement for Force10 IF Extension MIB.
Unknown
.1.3.6.1.4.1.6027.3.11.2.1.1
f10IfExtensionMibGroups
OBJECT IDENTIFIER
.1.3.6.1.4.1.6027.3.11.2.2
f10IfParamsGroupA collection of objects providing the Force10 IF Extenstion parameters.
Unknown
.1.3.6.1.4.1.6027.3.11.2.2.1
f10IfStatsGroupA collection of objects providing the interface statistics.
Unknown
.1.3.6.1.4.1.6027.3.11.2.2.2