F10-BMP-MIB
Imported Objects
Objects
10 total| Object Name |
|---|
f10BmpMibDell Networking OS Baremetal Provisioning MIB. MODULE-IDENTITY .1.3.6.1.4.1.6027.3.23 |
f10Bmp OBJECT IDENTIFIER .1.3.6.1.4.1.6027.3.23.1 |
bmpReloadTypeConfigure reload type to enable/disable BMP. normalReload - Regular reload type; BMP process is not initiated. bmpReload - Bmp reload type; BMP process is initiated and image/config files are upgraded based on the DHCP/BOOTP offer. Default is bmpReload.rw Enumeration .1.3.6.1.4.1.6027.3.23.1.1 |
bmpAutoSaveConfigure auto-save option for downloaded config file. bmpActionEnable - Enable auto-save option. bmpActionDisable - Disable auto-save option. Default is bmpActionDisable.rw Enumeration .1.3.6.1.4.1.6027.3.23.1.2 |
bmpConfigDownloadEnable/disable config file download. bmpActionEnable - Enable config-download option. bmpActionDisable - Disable config-download option. Default is bmpActionEnable.rw Enumeration .1.3.6.1.4.1.6027.3.23.1.3 |
bmpDhcpTimeoutConfigure the DHCP timeout value. Default is infinity which can be set using value 0rw INTEGER .1.3.6.1.4.1.6027.3.23.1.4 |
bmpRetryCountConfigure the number of attempts to download a config file. Default value is 3.rw INTEGER .1.3.6.1.4.1.6027.3.23.1.5 |
bmpUserDefinedStringA textual string containing information about the option 60.rw OCTET STRING .1.3.6.1.4.1.6027.3.23.1.6 |
bmpRelayConfigure relay option in bmp to support option82 information. bmpActionEnable - Enable option82 - relay information. bmpActionDisable - Disable option82 - relay information. Default is bmpActionDisable.rw Enumeration .1.3.6.1.4.1.6027.3.23.1.7 |
bmpRelayRemoteIdA textual string to be appened for the remote-id value.rw OCTET STRING .1.3.6.1.4.1.6027.3.23.1.8 |
More MIBs from Force10
Browse all Force10MIBs →The FORCE10-BGP4-V2-MIB enables monitoring and management of BGP4 protocol states, neighbor relationships, and routing table statistics on Dell Force10 networking hardware. It provides specific access to BGP session counters, route attributes, and peer state transitions for troubleshooting and policy enforcement within the network infrastructure.
SNMP MIB module
The DELL-NETWORKING-CHASSIS-MIB provides SNMP access to monitor physical chassis components and environmental sensors, including power supply unit status, fan module health, temperature readings, and system uptime, on Dell Networking OS hardware.
The DELL-NETWORKING-FPSTATS-MIB module enables monitoring of forward plane traffic statistics, including packet and byte counters, on Dell Networking OS switches. It provides critical visibility into data plane throughput and forwarding performance for capacity planning and fault isolation.
The F10-CHASSIS-MIB enables monitoring and management of physical chassis components, including power supplies, fans, temperature sensors, and system status indicators, within Dell Networking OS environments. This module provides the necessary OID definitions to track hardware health and environmental metrics for Dell F10 series switches.
SNMP MIB module