ERPS-MIB
The MIB module for managing Ethernet Ring Protection Switching.
Main OID:
swERPSMIB.dlink-common-mgmt.78
52
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
52 total| Object Name |
|---|
swERPSMIBThe MIB module for managing Ethernet Ring Protection Switching. MODULE-IDENTITY .dlink-common-mgmt.78 |
SNMPv2-TCThe MIB module for managing Ethernet Ring Protection Switching. NOTIFICATION-TYPE .dlink-common-mgmt.78 |
swERPSCtrl OBJECT IDENTIFIER .dlink-common-mgmt.78.1 |
swERPSAdminStateThis object indicates the ERPS state of the bridge.rw Enumeration .dlink-common-mgmt.78.1.1 |
swERPSLogStateThis object indicates the ERPS log state of the bridge.rw Enumeration .dlink-common-mgmt.78.1.2 |
swERPSTrapStateThis object indicates the ERPS trap state of the bridge.rw Enumeration .dlink-common-mgmt.78.1.3 |
swERPSInfo OBJECT IDENTIFIER .dlink-common-mgmt.78.2 |
swERPSMgmt OBJECT IDENTIFIER .dlink-common-mgmt.78.3 |
swERPSMgmtRAPSVlanTableThis table contains the ERPS ring configuration information. SEQUENCE OF SwERPSMgmtRAPSVlanEntry .dlink-common-mgmt.78.3.1 |
swERPSMgmtRAPSVlanEntryA list of the ERPS ring configuration information. SwERPSMgmtRAPSVlanEntry .dlink-common-mgmt.78.3.1.1 |
swERPSMgmtRAPSVlanIdThe RAPS VLAN is an index of the configuration.ro INTEGER .dlink-common-mgmt.78.3.1.1.1 |
swERPSMgmtRAPSWestPortThis is one of the RPL owner ports.The RPL owner may block this port.
The value 0 indicates the west port is a virtual channel.rw INTEGER (0|1..65535) .dlink-common-mgmt.78.3.1.1.2 |
swERPSMgmtRAPSWestPortStateThis is the west port state. The state may change occasionally.
When the west port is configured on a virtual channel, the west
port state is always forwarding.ro Enumeration .dlink-common-mgmt.78.3.1.1.3 |
swERPSMgmtRAPSEastPortThis is the other RPL owner port.The RPL Owner may block this port.
The value 0 indicates the west port is a virtual channel.rw INTEGER (0|1..65535) .dlink-common-mgmt.78.3.1.1.4 |
swERPSMgmtRAPSEastPortStateThis is the east port state. The state may change occasionally.
When the east port is configured on a virtual channel, the east
port state is always forwarding.ro Enumeration .dlink-common-mgmt.78.3.1.1.5 |
swERPSMgmtRAPSRPLPortWhen the port enable state is enabled, the RPL port's current
port role is defined by the ERPS application.rw Enumeration .dlink-common-mgmt.78.3.1.1.6 |
swERPSMgmtRAPSRPLOwnerAdminStateThe administrative value of the RPL owner state.
The RPL owner is an Ethernet Ring Node adjacent to the RPL that
is responsible for blocking its end of the RPL under normal
conditions.rw Enumeration .dlink-common-mgmt.78.3.1.1.7 |
swERPSMgmtRAPSProtectionVlanThe protection VLAN has prevented a loop.rw VidList .dlink-common-mgmt.78.3.1.1.8 |
swERPSMgmtRAPSRingMELThe ring MEL is the maintenance entity group (MEG) level that
provides a communication channel for the ring automatic protection
switching (RAPS) information.rw INTEGER .dlink-common-mgmt.78.3.1.1.9 |
swERPSMgmtRAPSHoldOffTimeIn order to coordinate the timing of protection switches at multiple layers.rw INTEGER .dlink-common-mgmt.78.3.1.1.10 |
swERPSMgmtRAPSGuardTimeThis is used to prevent ring nodes from receiving outdated RAPS messages.rw INTEGER .dlink-common-mgmt.78.3.1.1.11 |
swERPSMgmtRAPSWTRTimeWhen revertive is enabled, this is used to prevent frequent
operation of the protection switch due to an intermittent defect.
A failed working transport entity must become stable in a fault-free state.rw INTEGER .dlink-common-mgmt.78.3.1.1.12 |
swERPSMgmtRAPSRingStateThis indicates the state of the ring.The available states
are: begin, init, idle, or protection.ro Enumeration .dlink-common-mgmt.78.3.1.1.13 |
swERPSMgmtRAPSRingAdminStateThis indicates the administrative state of the ring.rw Enumeration .dlink-common-mgmt.78.3.1.1.14 |
swERPSMgmtRAPSRPLOwnerOperStatusThe current operational value of the RPL owner state. The value 'active'
is used to indicate that the RPL owner administrative state is enabled
and the device is operating as the active RPL owner. The value 'inactive'
is used to indicate that the RPL owner administrative state is enabled,
but the device is operating as the inactive RPL owner. The value
'disabled' is used to indicate that the RPL owner administrative
state of the device is disabled.ro Enumeration .dlink-common-mgmt.78.3.1.1.15 |
swERPSMgmtRAPSProtectionVlanRangeList1to64This object indicates the VLAN range (1-512)
that belong to the protected VLANs.rw OCTET STRING .dlink-common-mgmt.78.3.1.1.16 |
swERPSMgmtRAPSProtectionVlanRangeList65to128This object indicates the VLAN range (513-1024)
that belong to the protected VLANs.rw OCTET STRING .dlink-common-mgmt.78.3.1.1.17 |
swERPSMgmtRAPSProtectionVlanRangeList129to192This object indicates the VLAN range (1025-1536)
that belong to the protected VLANs.rw OCTET STRING .dlink-common-mgmt.78.3.1.1.18 |
swERPSMgmtRAPSProtectionVlanRangeList193to256This object indicates the VLAN range (1537-2048)
that belong to the protected VLANs.rw OCTET STRING .dlink-common-mgmt.78.3.1.1.19 |
swERPSMgmtRAPSProtectionVlanRangeList257to320This object indicates the VLAN range (2049-2560)
that belong to the protected VLANs.rw OCTET STRING .dlink-common-mgmt.78.3.1.1.20 |
swERPSMgmtRAPSProtectionVlanRangeList321to384This object indicates the VLAN range (2561-3072)
that belongs to the protected VLANs.rw OCTET STRING .dlink-common-mgmt.78.3.1.1.21 |
swERPSMgmtRAPSProtectionVlanRangeList385to448This object indicates the VLAN range (3073-3584)
that belong to the protected VLANs.rw OCTET STRING .dlink-common-mgmt.78.3.1.1.22 |
swERPSMgmtRAPSProtectionVlanRangeList449to512This object indicates the VLAN range (3585-4096)
that belong to the protected VLANs.rw OCTET STRING .dlink-common-mgmt.78.3.1.1.23 |
swERPSMgmtRAPSRevertiveThe object is used to enable or disable the revertive operation of a special
ring. When revertive is disabled, the traffic link is allowed to use the RPL,
after revovering from a failure. When revertive is enabled, the traffic
link is restored to the working transport link.rw Enumeration .dlink-common-mgmt.78.3.1.1.24 |
swERPSMgmtRAPSOperWestPortThis object indicates actual running ring west port.
The value 0 indicates the west port is a virtual channel.ro INTEGER (0|1..65535) .dlink-common-mgmt.78.3.1.1.25 |
swERPSMgmtRAPSOperEastPortThis object indicates actual running ring east port.
The value 0 indicates the east port is a virtual channel.ro INTEGER (0|1..65535) .dlink-common-mgmt.78.3.1.1.26 |
swERPSMgmtRAPSOperRPLPortThis object indicates actual running ring RPL port.ro Enumeration .dlink-common-mgmt.78.3.1.1.27 |
swERPSMgmtRAPSRPLOwnerOperStateThis object indicates actual running RPL owner state.ro Enumeration .dlink-common-mgmt.78.3.1.1.28 |
swERPSMgmtRAPSRowStatusThis object indicates the RowStatus of this entry.rw RowStatus (SNMPv2-TC) .dlink-common-mgmt.78.3.1.1.100 |
swERPSMgmtSubRingCtrlTableThis table contains the ERPS sub-ring configuration information. SEQUENCE OF SwERPSMgmtSubRingCtrlEntry .dlink-common-mgmt.78.3.2 |
swERPSMgmtSubRingCtrlEntryA list of the ERPS sub-ring configuration information. SwERPSMgmtSubRingCtrlEntry .dlink-common-mgmt.78.3.2.1 |
swERPSMgmtSubRingCtrlRAPSVlanIdThe RAPS VLAN is an index of the configuration. INTEGER .dlink-common-mgmt.78.3.2.1.1 |
swERPSMgmtSubRingCtrlSubRingRAPSVlanIdThis indicates the ring control VLAN-ID of the sub-ring which
connects to another ring. INTEGER .dlink-common-mgmt.78.3.2.1.2 |
swERPSMgmtSubRingCtrlTCPropagationStateThis indicates the state of the sub-ring topology change propagation.rw Enumeration .dlink-common-mgmt.78.3.2.1.3 |
swERPSMgmtSubRingCtrlRowStatusThis object indicates the status of this entry.rw RowStatus (SNMPv2-TC) .dlink-common-mgmt.78.3.2.1.4 |
swERPSNotify OBJECT IDENTIFIER .dlink-common-mgmt.78.4 |
swERPSNotifyPrefix OBJECT IDENTIFIER .dlink-common-mgmt.78.4.0 |
swERPSSFDetectedTrapWhen a signal failure occurs, a trap will be generated. NOTIFICATION-TYPE .dlink-common-mgmt.78.4.0.1 |
swERPSSFClearedTrapWhen the signal failure clears, a trap will be generated. NOTIFICATION-TYPE .dlink-common-mgmt.78.4.0.2 |
swERPSRPLOwnerConflictTrapWhen a conflict occurs, a trap will be generated. NOTIFICATION-TYPE .dlink-common-mgmt.78.4.0.3 |
swERPSNotificationBindings OBJECT IDENTIFIER .dlink-common-mgmt.78.4.2 |
swERPSNodeIdThis used trap object means the node MAC.ro MacAddress (SNMPv2-TC) .dlink-common-mgmt.78.4.2.1 |