ERI-DNX-T3-MIB
The ERI Enterprise MIB Module for the DNX T3 Device.
Main OID:
eriDNXT3MIB.1.3.6.1.4.1.644.3.3
40
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
40 total| Object Name |
|---|
dnxT3 OBJECT IDENTIFIER .1.3.6.1.4.1.644.2.4.2.1 |
dnxT3EnterpriseERI DNX T3 Enterprise for Alarms/Events OBJECT IDENTIFIER .1.3.6.1.4.1.644.2.4.2.1.0 |
t3PortConfigTrapThis trap is used to notify a NMS that a user has updated the configuration for a given T3 Port entry. NOTIFICATION-TYPE .1.3.6.1.4.1.644.2.4.2.1.0.1 |
t3T1ConfigTrapThis trap is used to notify a NMS that a user has updated the Link configuration for a given T3-T1 channel entry. NOTIFICATION-TYPE .1.3.6.1.4.1.644.2.4.2.1.0.2 |
t3Config OBJECT IDENTIFIER .1.3.6.1.4.1.644.2.4.2.1.1 |
t3PortConfigTableThis is the T3 Port Configuration table which consists of an entry for each of the T3 cards. The total number of entries depends on the number of T3 cards in the nest. SEQUENCE OF T3PortConfigEntry .1.3.6.1.4.1.644.2.4.2.1.1.1 |
t3PortConfigEntryThe conceptual row of the T3 Port Configuration table. A row in this table cannot be added or deleted, only modified. T3PortConfigEntry .1.3.6.1.4.1.644.2.4.2.1.1.1.1 |
t3CfgAddrThis number uniquely identifies a T3 slot/port.ro LinkPortAddress (ERI-DNX-SMC-MIB) .1.3.6.1.4.1.644.2.4.2.1.1.1.1.1 |
t3CfgResourceUniquely identifies an T3 Port in the system. This number is provided as key to allow the manager to map this entry to a corresponding Resource Table entry.ro Integer32 .1.3.6.1.4.1.644.2.4.2.1.1.1.1.2 |
t3CfgCircuitNameThis is the user friendly text name to identify the circuit.rw DisplayString .1.3.6.1.4.1.644.2.4.2.1.1.1.1.3 |
t3FacilityIdThis is a description of the facility where this equipment is located.rw DisplayString .1.3.6.1.4.1.644.2.4.2.1.1.1.1.4 |
t3EquipmentIdThis is a description of the equipment in use.rw DisplayString .1.3.6.1.4.1.644.2.4.2.1.1.1.1.5 |
t3LocationThis is the user description of the location for this equipment.rw DisplayString .1.3.6.1.4.1.644.2.4.2.1.1.1.1.6 |
t3FrameIdThis is the description of the building where this equipment is located.rw DisplayString .1.3.6.1.4.1.644.2.4.2.1.1.1.1.7 |
t3UnitNameThis is the description of the bay or device this equipment is part of.rw DisplayString .1.3.6.1.4.1.644.2.4.2.1.1.1.1.8 |
t3PortNumberThis is the user description of the DS3 port.rw DisplayString .1.3.6.1.4.1.644.2.4.2.1.1.1.1.9 |
t3GeneratorThis is the user description of the number generated by this equipment.rw DisplayString .1.3.6.1.4.1.644.2.4.2.1.1.1.1.10 |
t3M13OpModeThe framing selection for the DS1 to DS3 multiplexing.rw Enumeration .1.3.6.1.4.1.644.2.4.2.1.1.1.1.11 |
t3RcvLoopTimingEnables or disables the DS3 transmit timing provided by the receive clock. When disabled, timing is provided by an on-board oscillator.rw FunctionSwitch (ERI-DNX-SMC-MIB) .1.3.6.1.4.1.644.2.4.2.1.1.1.1.12 |
t3ShortCableIndicates the line build out of the DS3 transmitter. 'Yes' when attached to a cable less than 50 feet long.rw DecisionType (ERI-DNX-SMC-MIB) .1.3.6.1.4.1.644.2.4.2.1.1.1.1.13 |
t3M13RemLoopControls the line codes used to set and reset DS1 remote line loopback requests. This applies the BellCore M13 mode only.rw Enumeration .1.3.6.1.4.1.644.2.4.2.1.1.1.1.14 |
t3RcvAISThe Received bit pattern that will cause an error.rw Enumeration .1.3.6.1.4.1.644.2.4.2.1.1.1.1.15 |
t3XmtAISThe Transmitted bit pattern that will cause an error.rw Enumeration .1.3.6.1.4.1.644.2.4.2.1.1.1.1.16 |
t3CmdStatusThe command status for this link configuration row/record. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success or failure. Default Response State used in GET RESPONSE Command ready-for-command (0) initial default status for a row T3 Link Commands used in SET Command (1..99) update-link-config(1), Change existing Link Configuration Response States used in GET RESPONSE Command (100..199) update-successful (101) Link data has been successfully changed T3 Port Config Error Codes used in GET RESPONSE Command (100..699) err-general-link-config-error (400) Unknown link configuration error occurred err-invalid-link-status (401) Unrecognized link status setting err-invalid-link-framing (402) Line framing type not valid for link type err-invalid-link-command (403) Unrecognized link command-action err-invalid-link-op-mode (407) Configured M13 Op mode not valid for port; verify other link parameters match desired new mode err-invalid-link-rem-loop (408) Remote Loop type not valid for t3 frame type err-invalid-link-ais (409) Unrecognized t3 AIS selection err-data-locked-by-another-user (450) Another administrative user is making changes to this part of the system via a terminal session. Check Event Log for user name err-snmp-parse-failed (500) Agent could not parse variable err-invalid-snmp-type (501) Variable ASN type does not match Agent defined type err-invalid-snmp-var-size (502) Variable size is too bigrw LinkCmdStatus (ERI-DNX-SMC-MIB) .1.3.6.1.4.1.644.2.4.2.1.1.1.1.17 |
t3T1LinkConfigTableThis is the T3 T-1 Link Configuration table which consists of an entry for each of the card's 28 links. The total number of entries depends on the number of DS3 cards in the nest. SEQUENCE OF T3T1LinkConfigEntry .1.3.6.1.4.1.644.2.4.2.1.1.2 |
t3T1LinkConfigEntryThe conceptual row of the T3 T-1 Link Configuration table. A row in this table cannot be added or deleted, only modified. T3T1LinkConfigEntry .1.3.6.1.4.1.644.2.4.2.1.1.2.1 |
t3T1CfgLinkAddrThis number uniquely identifies a T3/T-1 link resource. This number will be used throughout the system to identify a unique resource.ro LinkPortAddress (ERI-DNX-SMC-MIB) .1.3.6.1.4.1.644.2.4.2.1.1.2.1.1 |
t3T1CfgResourceUniquely identifies an T3 T1 Channel in the system. This number is provided as key to allow the manager to map this entry to a corresponding Resource Table entry.ro Integer32 .1.3.6.1.4.1.644.2.4.2.1.1.2.1.2 |
t3T1CfgLinkNameThis is the user friendly text name to identify the link.rw DisplayString .1.3.6.1.4.1.644.2.4.2.1.1.2.1.3 |
t3T1StatusDictates the current status of the link, in-service or out-of-service.rw PortStatus (ERI-DNX-SMC-MIB) .1.3.6.1.4.1.644.2.4.2.1.1.2.1.4 |
t3T1FramingDetermines the type of framing used on the line. Choose between SuperFrame 'D4' or Extended SuperFrame (ESF).rw Enumeration .1.3.6.1.4.1.644.2.4.2.1.1.2.1.5 |
t3T1DensityDetermines the type of network signal used on the link. If line code is B8ZS, choose 'clear'. If line code is AMI, choose 62411.rw Enumeration .1.3.6.1.4.1.644.2.4.2.1.1.2.1.6 |
t3T1NetLoopDetermines whether or not the module should respond to loop diagnostic commands received from the network supplier. Select 'enable' unless the commands are to be passed to another DS3 device.rw FunctionSwitch (ERI-DNX-SMC-MIB) .1.3.6.1.4.1.644.2.4.2.1.1.2.1.7 |
t3T1YelAlrmCauses the module to discard data and send a yellow alarm if it is in a red alarm condition after a 3 second period. 'Yes' must be chosen if the network supplier is a common carrier, such as a telephone company.rw DecisionType (ERI-DNX-SMC-MIB) .1.3.6.1.4.1.644.2.4.2.1.1.2.1.8 |
t3T1RecoverTimeThis is the red alarm timeout value. Determines the amount of seconds the port will wait to stop sending the yellow alarm when coming out of a red alarm condition.rw Enumeration .1.3.6.1.4.1.644.2.4.2.1.1.2.1.9 |
t3T1EsfFormatDetermines the type of ESF network commands the T-1 link will respond to. It has no meaning for D4 networks. With ESF networks, this information must be obtained from the network supplier.rw Enumeration .1.3.6.1.4.1.644.2.4.2.1.1.2.1.10 |
t3T1IdleCodeDetermines the whether the code that will be transmitted over the unused links will be 'idle' or 'busy' (all 1's).rw Enumeration .1.3.6.1.4.1.644.2.4.2.1.1.2.1.11 |
t3T1CfgCmdStatusThe command status for this link configuration row/record. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success or failure. Default Response State used in GET RESPONSE Command ready-for-command (0) initial default status for a row T3-T1 Link Commands used in SET Command (1..99) update-link-config(1) Change existing Link Configuration inServiceAll (7) Change Link Status to in-service for all 8 links. copyToAll (9) Copy T1 Link configuration to all other links within the same device outOfServiceAll (12) Change Link Status to out-of-service for all 8 links. Response States used in GET RESPONSE Command (100..199) update-successful (101) Link data has been successfully changed insvc-successful (107) All Links have been successfully placed In Service copy-successful (109) T1 Link data has been successfully copied to other links oos-successful (112) All Links have been successfully placed Out of Service T3-T1 Link Config Error Codes used in GET RESPONSE Command (200..699) err-general-link-config-error (400) Unknown link configuration error occurred err-invalid-link-status (401) Unrecognized link status setting err-invalid-link-framing (402) Line framing type not valid for link type err-invalid-link-command (403) Unrecognized link command-action err-invalid-esf-format (405) ESF type not applicable to link type err-invalid-link-density (406) Unrecognized T1 link density setting err-invalid-network-loop (410) Unrecognized network loop setting err-invalid-yellow-alrm (411) Unrecognized yellow alarm setting err-invalid-red-timeout (412) Unrecognized red alarm timeout err-invalid-idle-code (413) Unrecognized idle code err-device-in-standby (414) Can't change config for designated Standby device err-data-locked-by-another-user (450) Another administrative user is making changes to this part of the system via a terminal session. Check Event Log for user name err-snmp-parse-failed (500) Agent could not parse variable err-invalid-snmp-type (501) Variable ASN type does not match Agent defined type err-invalid-snmp-var-size (502) Variable size is too bigrw LinkCmdStatus (ERI-DNX-SMC-MIB) .1.3.6.1.4.1.644.2.4.2.1.1.2.1.12 |
t3Diag OBJECT IDENTIFIER .1.3.6.1.4.1.644.2.4.2.1.2 |
eriDNXT3MIBThe ERI Enterprise MIB Module for the DNX T3 Device. MODULE-IDENTITY .1.3.6.1.4.1.644.3.3 |