ERI-DNX-HDS3-MIB
The ERI Enterprise MIB Module for the DNX HDS3 Device.
Main OID:
eriDNXHybridDS3MIB.1.3.6.1.4.1.644.3.5
87
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
87 total| Object Name |
|---|
dnxHDS3 OBJECT IDENTIFIER .1.3.6.1.4.1.644.2.4.2.2 |
dnxHDS3EnterpriseERI DNX HDS3 Enterprise for Alarms/Events OBJECT IDENTIFIER .1.3.6.1.4.1.644.2.4.2.2.0 |
hds3PortConfigTrapThis trap is used to notify a NMS that a user has updated the configuration for a given HDS3 Port entry. NOTIFICATION-TYPE .1.3.6.1.4.1.644.2.4.2.2.0.1 |
hds3T1E1ConfigTrapThis trap is used to notify a NMS that a user has updated the Link configuration for a given HDS3-T1/E1 channel entry. NOTIFICATION-TYPE .1.3.6.1.4.1.644.2.4.2.2.0.2 |
hds3Config OBJECT IDENTIFIER .1.3.6.1.4.1.644.2.4.2.2.1 |
hds3PortConfigTableThis is the HDS-3 Port Configuration table which consists of an entry for each of the HDS-3 cards. The total number of entries depends on the number of HDS-3 cards in the nest. This is the HDS-3 DS2/G.747 Configuration table which consists of an entry for each of the HDS-3 cards. The total number of entries depends on the number of HDS-3 cards in the nest. SEQUENCE OF HDS3PortConfigEntry .1.3.6.1.4.1.644.2.4.2.2.1.1 |
hds3PortConfigEntryThe conceptual row of the HDS-3 Port Configuration table. A row in this table cannot be added or deleted, only modified. HDS3PortConfigEntry .1.3.6.1.4.1.644.2.4.2.2.1.1.1 |
hds3PortCfgAddrThis number uniquely identifies a HDS-3 T1/E1 link resource. This number will be used throughout the system to identify a unique resource.ro LinkPortAddress (ERI-DNX-SMC-MIB) .1.3.6.1.4.1.644.2.4.2.2.1.1.1.1 |
hds3PortCfgResourceUniquely identifies an HDS3 Port in the system. This number is provided as key to allow the manager to map this entry to a corresponding Resource Table entry.ro Integer32 .1.3.6.1.4.1.644.2.4.2.2.1.1.1.2 |
hds3PortCfgNameThis is the user friendly text name to identify the circuit.rw DisplayString .1.3.6.1.4.1.644.2.4.2.2.1.1.1.3 |
hds3FacilityIdThis is a description of the facility where this equipment is located.rwobsolete DisplayString .1.3.6.1.4.1.644.2.4.2.2.1.1.1.4 |
hds3EquipmentIdThis is a description of the equipment in use.rwobsolete DisplayString .1.3.6.1.4.1.644.2.4.2.2.1.1.1.5 |
hds3LocationThis is the user description of the location for this equipment.rwobsolete DisplayString .1.3.6.1.4.1.644.2.4.2.2.1.1.1.6 |
hds3FrameIdThis is the description of the building where this equipment is located.rwobsolete DisplayString .1.3.6.1.4.1.644.2.4.2.2.1.1.1.7 |
hds3UnitNameThis is the description of the bay or device this equipment is part of.rwobsolete DisplayString .1.3.6.1.4.1.644.2.4.2.2.1.1.1.8 |
hds3PortNumberThis is the user description of the HDS-3 port.rwobsolete DisplayString .1.3.6.1.4.1.644.2.4.2.2.1.1.1.9 |
hds3GeneratorThis is the user description of the number generated by this equipment.rwobsolete DisplayString .1.3.6.1.4.1.644.2.4.2.2.1.1.1.10 |
hds3M13OpModeThe framing selection for the DS1 to HDS-3 multiplexing.rw Enumeration .1.3.6.1.4.1.644.2.4.2.2.1.1.1.11 |
hds3RcvLoopTimingEnables or disables the HDS-3 transmit timing provided by the receive clock. When disabled, timing is provided by an on-board oscillator.rw FunctionSwitch (ERI-DNX-SMC-MIB) .1.3.6.1.4.1.644.2.4.2.2.1.1.1.12 |
hds3ShortCableIndicates the line build out of the HDS-3 transmitter. 'Yes' when attached to a cable less than 50 feet long.rw DecisionType (ERI-DNX-SMC-MIB) .1.3.6.1.4.1.644.2.4.2.2.1.1.1.13 |
hds3M13RemLoopControls line codes used to set and reset DS3 remote line loopback requests. This setting is provided by the carrier. These codes cause a DS3 loopback in remote DS3 equipment or respond to codes from remote DS3 equipment. This applies to Bellcore M13 mode only. Different manufacturers use different patterns in M13 mode.rw Enumeration .1.3.6.1.4.1.644.2.4.2.2.1.1.1.14 |
hds3FEACLoopbackReqSelect enabled(1) to allow the module to respond to a Far End Alarm and Control loopback request.rw FunctionSwitch (ERI-DNX-SMC-MIB) .1.3.6.1.4.1.644.2.4.2.2.1.1.1.15 |
hds3XmtAISLocalLoopThe Transmitted bit pattern used when the HDS3 port is in Local Loop.rw Enumeration .1.3.6.1.4.1.644.2.4.2.2.1.1.1.16 |
hds3RcvAISThe Received bit pattern to use to determine when the remote line is in error.rw Enumeration .1.3.6.1.4.1.644.2.4.2.2.1.1.1.17 |
hds3XmtAISThe Transmitted bit pattern that used when the HDS3 port is in error.rw Enumeration .1.3.6.1.4.1.644.2.4.2.2.1.1.1.18 |
hds3DS2Group1Indicates the type of grouping option used to on links 1 through 4. Using the VT 2.0, link 4 is not used.rw DS2GroupType .1.3.6.1.4.1.644.2.4.2.2.1.1.1.19 |
hds3DS2Group2Indicates the type of grouping option used to on links 5 through 8. Using the VT 2.0, link 8 is not used.rw DS2GroupType .1.3.6.1.4.1.644.2.4.2.2.1.1.1.20 |
hds3DS2Group3Indicates the type of grouping option used to on links 9 through 12. Using the VT 2.0, link 12 is not used.rw DS2GroupType .1.3.6.1.4.1.644.2.4.2.2.1.1.1.21 |
hds3DS2Group4Indicates the type of grouping option used to on links 13 through 16. Using the VT 2.0, link 16 is not used.rw DS2GroupType .1.3.6.1.4.1.644.2.4.2.2.1.1.1.22 |
hds3DS2Group5Indicates the type of grouping option used to on links 17 through 20. Using the VT 2.0, link 20 is not used.rw DS2GroupType .1.3.6.1.4.1.644.2.4.2.2.1.1.1.23 |
hds3DS2Group6Indicates the type of grouping option used to on links 21 through 24. Using the VT 2.0, link 24 is not used.rw DS2GroupType .1.3.6.1.4.1.644.2.4.2.2.1.1.1.24 |
hds3DS2Group7Indicates the type of grouping option used to on links 25 through 28. Using the VT 2.0, link 28 is not used.rw DS2GroupType .1.3.6.1.4.1.644.2.4.2.2.1.1.1.25 |
hds3CmdStatusThe command status for this link configuration row/record. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success or failure. Default Response State used in GET RESPONSE Command ready-for-command (0) initial default status for a row HDS3 Link Commands used in SET Command (1..199) update-link-config(1), Change existing Link Configuration Response States used in GET RESPONSE Command (200..399) update-successful (201) Link data has been successfully changed HDS3 Port Config Error Codes used in GET RESPONSE Command (400..699) err-general-link-config-error (400) Unknown link configuration error occurred err-invalid-link-status (401) Unrecognized link status setting err-invalid-link-framing (402) Line framing type not valid for link type err-invalid-link-command (403) Unrecognized link command-action err-invalid-link-op-mode (407) Configured M13 Op mode not valid for port; verify other link parameters match desired new mode err-invalid-link-rem-loop (408) Remote Loop type not valid for hds3 frame type err-invalid-link-ais (409) Unrecognized hds3 AIS selection err-data-locked-by-another-user (450) Another administrative user is making changes to this part of the system via a terminal session. Check Event Log for user name.rw LinkCmdStatus (ERI-DNX-SMC-MIB) .1.3.6.1.4.1.644.2.4.2.2.1.1.1.26 |
hds3T1E1LinkConfigTableThis is the HDS-3 T-1 Link Configuration table which consists of an entry for each of the card's 28 links. The total number of entries depends on the number of HDS3 cards in the nest. SEQUENCE OF HDS3T1E1LinkConfigEntry .1.3.6.1.4.1.644.2.4.2.2.1.2 |
hds3T1E1LinkConfigEntryThe conceptual row of the HDS-3 T-1 Link Configuration table. A row in this table cannot be added or deleted, only modified. HDS3T1E1LinkConfigEntry .1.3.6.1.4.1.644.2.4.2.2.1.2.1 |
hds3T1E1CfgLinkAddrThis number uniquely identifies a HDS-3 T1/E1 link resource. This number will be used throughout the system to identify a unique resource.ro LinkPortAddress (ERI-DNX-SMC-MIB) .1.3.6.1.4.1.644.2.4.2.2.1.2.1.1 |
hds3T1E1CfgResourceUniquely identifies an HDS-3 T1/E1 Channel in the system. This number is provided as key to allow the manager to map this entry to a corresponding Resource Table entry.ro Integer32 .1.3.6.1.4.1.644.2.4.2.2.1.2.1.2 |
hds3T1E1CfgLinkNameThis is the user friendly text name to identify the link.rw DisplayString .1.3.6.1.4.1.644.2.4.2.2.1.2.1.3 |
hds3T1E1StatusDictates the current status of the link, in-service or out-of-service.rw PortStatus (ERI-DNX-SMC-MIB) .1.3.6.1.4.1.644.2.4.2.2.1.2.1.4 |
hds3T1E1ClearDetermines if the port supports T1 or E1 unframed.rw Enumeration .1.3.6.1.4.1.644.2.4.2.2.1.2.1.5 |
hds3T1E1FramingDetermines the type of framing used on the line. Choose between T1 SuperFrame 'D4', Extended SuperFrame (ESF), or T1 Unframed. When value of hds3T1E1Clear is set to unframed (2), the only valid framing options are: e1Unframed(4) or t1Unframed(7).rw Enumeration .1.3.6.1.4.1.644.2.4.2.2.1.2.1.6 |
hds3T1E1NetLoopDetermines whether or not the module should respond to loop diagnostic commands received from the network supplier. Select 'enable' unless the commands are to be passed to another HDS3 device.rw FunctionSwitch (ERI-DNX-SMC-MIB) .1.3.6.1.4.1.644.2.4.2.2.1.2.1.7 |
hds3T1E1YelAlrmCauses the module to discard data and send a yellow alarm if it is in a red alarm condition after a 3 second period. 'Yes' must be chosen if the network supplier is a common carrier, such as a telephone company.rw DecisionType (ERI-DNX-SMC-MIB) .1.3.6.1.4.1.644.2.4.2.2.1.2.1.8 |
hds3T1E1RecoverTimeThis is the red alarm timeout value. Determines the amount of seconds the port will wait to stop sending the yellow alarm when coming out of a red alarm condition. This field does not apply to E1 links.rw Enumeration .1.3.6.1.4.1.644.2.4.2.2.1.2.1.9 |
hds3T1E1EsfFormatDetermines the type of ESF network commands the T-1 link will respond to. It has no meaning for D4 networks. With ESF networks, this information must be obtained from the network supplier.rw Enumeration .1.3.6.1.4.1.644.2.4.2.2.1.2.1.10 |
hds3T1E1IdleCodeDetermines the whether the code that will be transmitted over the unused links will be 'idle' or 'busy' (all 1's).rw Enumeration .1.3.6.1.4.1.644.2.4.2.2.1.2.1.11 |
hds3T1E1CfgCmdStatusThe command status for this link configuration row/record. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success or failure. Default Response State used in GET RESPONSE Command ready-for-command (0) initial default status for a row HDS3-T1E1 Link Commands used in SET Command (1..199) update(1) Change existing Link Configuration inServiceAll (7) Change Link Status to in-service for all 8 links. copyToAll (9) Copy T1 Link configuration to all other links within the same device outOfServiceAll (12) Change Link Status to out-of-service for all 8 links. Response States used in GET RESPONSE Command (100..199) update-successful (101) Link data has been successfully changed insvc-successful (107) All Links have been successfully placed In Service copy-successful (109) T1 Link data has been successfully copied to other links oos-successful (112) All Links have been successfully placed Out of Service HDS3-T1E1 Link Config Error Codes used in GET RESPONSE Command (400..699) err-general-link-config-error (400) Unknown link configuration error occurred err-invalid-link-status (401) Unrecognized link status setting err-invalid-link-framing (402) Line framing type not valid for link type err-invalid-link-command (403) Unrecognized link command-action err-invalid-esf-format (405) ESF type not applicable to link type err-invalid-link-density (406) Unrecognized T1 link density setting err-invalid-network-loop (410) Unrecognized network loop setting err-invalid-yellow-alrm (411) Unrecognized yellow alarm setting err-invalid-red-timeout (412) Unrecognized red alarm timeout err-invalid-idle-code (413) Unrecognized idle code err-device-in-standby (414) Can't change config for designated Standby device err-invalid-link-bits (427) Reserved E1 bits must be left at zero. err-data-locked-by-another-user (450) Another administrative user is making changes to this part of the system via a terminal session. Check Event Log for user name err-snmp-parse-failed (500) Agent could not parse variable err-invalid-snmp-type (501) Variable ASN type does not match Agent defined type err-invalid-snmp-var-size (502) Variable size is too bigrw LinkCmdStatus (ERI-DNX-SMC-MIB) .1.3.6.1.4.1.644.2.4.2.2.1.2.1.12 |
hds3T1E1Gr303FacilityEnables link to be configured as a Gr303 Facilityroobsolete DecisionType (ERI-DNX-SMC-MIB) .1.3.6.1.4.1.644.2.4.2.2.1.2.1.13 |
hds3T1E1NationalBitsEnables E1 National S-bits to be set to zero or one. This single byte field can be changed to set the values of the E1 NFA byte in odd frames as depicted below: sa8 sa7 sa6 sa5 sa4 reserved bits --- --- --- --- --- ------------- 1 1 1 1 1 0 0 0 = F8 (default) Values should be entered in Hex. If reserved bits are changed, an error code (427) will be returned in the command status.rw OneByteField (ERI-DNX-SMC-MIB) .1.3.6.1.4.1.644.2.4.2.2.1.2.1.14 |
hds3T1E1InterNationalEnables InterNational S(i) Spare bit to be set to zero or one. This single byte field can be changed to set the values of the Bit 1 of TS0 G.704 frame as depicted below: reserved bits S(i) -------------------------- ----- 0 0 0 0 0 0 0 1 = 01 (default) Values should be entered in Hex. If reserved bits are changed, an error code (427) will be returned in the command status.rw OneByteField (ERI-DNX-SMC-MIB) .1.3.6.1.4.1.644.2.4.2.2.1.2.1.15 |
hds3Diag OBJECT IDENTIFIER .1.3.6.1.4.1.644.2.4.2.2.2 |
hds3FramerStatusTableThis is the HDS-3 Framer Status table which consists of a single entry for each card's Framer Display. The total number of entries depends on the number of HDS3 cards in the nest. SEQUENCE OF HDS3FramerStatusEntry .1.3.6.1.4.1.644.2.4.2.2.2.1 |
hds3FramerStatusEntryThe conceptual row of the Framer table. A row in this table cannot be added or deleted, only modified. HDS3FramerStatusEntry .1.3.6.1.4.1.644.2.4.2.2.2.1.1 |
hds3FramerStatusAddrThis number uniquely identifies a HDS-3 Framer resource. This number will be used throughout the system to identify a unique resource.ro LinkPortAddress (ERI-DNX-SMC-MIB) .1.3.6.1.4.1.644.2.4.2.2.2.1.1.1 |
hds3FramerStatusResourceThis number uniquely identifies a HDS-3 Framer link resource. This number is provided as key to allow the manager to map this entry to a corresponding Resource Table Entry.ro Integer32 .1.3.6.1.4.1.644.2.4.2.2.2.1.1.2 |
hds3FramerStatusStateDetermines the current line condition status of the Framer. ok (0) - No Alarm ais (8) - Sending All Ones lof (32) - Loss/Out of Frame los (64) - Loss of Signal errors (2147483647) - Multiple Errors displays raw bit field valuero Enumeration .1.3.6.1.4.1.644.2.4.2.2.2.1.1.3 |
hds3FramerStatusRedAlrmErrSecsThis is the number of seconds a Red Alarm condition was declared. Declared when out of frame condition persists for more than 13.5msec.ro Counter32 .1.3.6.1.4.1.644.2.4.2.2.2.1.1.4 |
hds3FramerStatusLOSErrSecsThis is the number of seconds a Loss of Signal condition was declared. Loss of signal declared after receipt of 175 contiguous zeroes.ro Counter32 .1.3.6.1.4.1.644.2.4.2.2.2.1.1.5 |
hds3FramerStatusOOFErrSecsThis is the number of seconds Frame alignment errors were detected.ro Counter32 .1.3.6.1.4.1.644.2.4.2.2.2.1.1.6 |
hds3FramerStatusAISErrSecsThis is the number of seconds a Alarm Indication Signal condition was declared. Declared after optioned AIS pattern is detected for more than 13.5msec.ro Counter32 .1.3.6.1.4.1.644.2.4.2.2.2.1.1.7 |
hds3FramerStatusRcvIdleErrSecsThis is the number of seconds a Receive Idle Pattern condition was declared. Declared when DS3 1100 idle pattern detected for more than 13.5ms.ro Counter32 .1.3.6.1.4.1.644.2.4.2.2.2.1.1.8 |
hds3FramerStatusFarEndRcvErrSecsThis is the number of seconds a Far End Receive Failure condition was declared. Declared when both X-bits set to 0 in M13 and C-bit Parity frame format (i.e., yellow alarm indicator)ro Counter32 .1.3.6.1.4.1.644.2.4.2.2.2.1.1.9 |
hds3FramerStatusCFAErrSecsThis is the number of seconds a Frame alignment change was detected.ro Counter32 .1.3.6.1.4.1.644.2.4.2.2.2.1.1.10 |
hds3FramerStatusTotErrSecsTotal number of seconds in which any of the errored events have occurred.ro Counter32 .1.3.6.1.4.1.644.2.4.2.2.2.1.1.11 |
hds3FramerStatusPbitParityErrsThe number of P-bit Parity errors detected.ro Counter32 .1.3.6.1.4.1.644.2.4.2.2.2.1.1.12 |
hds3FramerStatusCbitParityErrsThe number of C-bit Parity errors detected.ro Counter32 .1.3.6.1.4.1.644.2.4.2.2.2.1.1.13 |
hds3FramerStatusFebeErrsThe number of Far End Block errors detected.ro Counter32 .1.3.6.1.4.1.644.2.4.2.2.2.1.1.14 |
hds3FramerStatusLCVErrsThe number of Line Code Violation errors detected.ro Counter32 .1.3.6.1.4.1.644.2.4.2.2.2.1.1.15 |
hds3FramerStatusFramingErrsThe number of Framing errors detected.ro Counter32 .1.3.6.1.4.1.644.2.4.2.2.2.1.1.16 |
hds3FramerStatusExcessZeroErrsThe number of Excessive Zero errors detected.ro Counter32 .1.3.6.1.4.1.644.2.4.2.2.2.1.1.17 |
hds3FramerStatusInsErrModeDetermines the status of the current Insert Error mode associated with the framer. In order to insert an error, the hds3FramerStatusCmdStatus must be sent in a SET PDU with a value of 'insertError'.rw Enumeration .1.3.6.1.4.1.644.2.4.2.2.2.1.1.18 |
hds3FramerStatusCmdStatusThis is the command status for the DS3 Framer Row. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success or failure. Default Response State used in GET RESPONSE Command ready-for-command (0) initial default status for a row DS3 Framer Action Commands used in SET Command (1..99) update (1) Can be used optionally when inserting errors in order to get status code back in response clearErrors (14) Resets all error counters and bert test time to zero insertError (16) Inserts the current invalid bit pattern as indicated by the value of hds3FramerStatusInsErrMode. Response States used in GET RESPONSE Command (100..199) update-successful (101) Action has been successfully performed clear-successful (114) Error counts have been successfully cleared insert-successful (116) Errored bits have been successfully inserted The Error Codes used in GET RESPONSE Command (200..799) err-general-framer-error (200) Unknown request error occurred. err-test-in-progress (205) Requested action cannot be performed during bert err-field-cannot-be-set (206) Read-only field was included in SET request err-invalid-command (208) Unrecognized framer Command requested err-snmp-parse-failed (500) Agent could not parse variable err-invalid-snmp-type (501) Variable ASN type does not match Agent defined type err-invalid-snmp-var-size (502) Variable size is too bigrw Enumeration .1.3.6.1.4.1.644.2.4.2.2.2.1.1.19 |
hds3LIUTableThis is the HDS-3 LIU Diagnostic Status Display table which consists of an entry for each HDS3 card's Line Interface Unit Display. The number of entries depends on the number of HDS3 cards in the nest. SEQUENCE OF HDS3LIUEntry .1.3.6.1.4.1.644.2.4.2.2.2.2 |
hds3LIUEntryThe conceptual row of the HDS3 LIU table. A row in this table cannot be added or deleted, only modified. HDS3LIUEntry .1.3.6.1.4.1.644.2.4.2.2.2.2.1 |
hds3LIUAddrThis number uniquely identifies a HDS-3 LIU resource address. This number will be used throughout the system to identify a unique resource.ro LinkPortAddress (ERI-DNX-SMC-MIB) .1.3.6.1.4.1.644.2.4.2.2.2.2.1.1 |
hds3LIUResourceThis number uniquely identifies a HDS-3 LIU resource. This number is provided as a key to allow the manager to map this entry to a corresponding Resource Table Entry.ro Integer32 .1.3.6.1.4.1.644.2.4.2.2.2.2.1.2 |
hds3LIUBertStateThis is the LIU Bert State indicated by liu-bert(on)/off. The LIU Bert is an 2^15-1 Unframed BERT.rw Enumeration .1.3.6.1.4.1.644.2.4.2.2.2.2.1.3 |
hds3LIUBertErrSecsThis is the number of LIU Bert Errored seconds.ro Counter32 .1.3.6.1.4.1.644.2.4.2.2.2.2.1.4 |
hds3LIUBertDurationThis is the number of seconds for the LIU Bert Duration.ro Counter32 .1.3.6.1.4.1.644.2.4.2.2.2.2.1.5 |
hds3LIULoopTypeIndicates the loopback status of the DS3 Framer/LIU for this device. off (0) - indicates loopback is disabled ds3-local (1) - indicates DS3 local data is looped back to itself ds3-line (36)- entire DS3 Frame is looped, framing is not regenerated liu (39)- indicates Line Interface Unit local data is looped back to itself.rw Enumeration .1.3.6.1.4.1.644.2.4.2.2.2.2.1.6 |
hds3LIUDigitalErrsThis is the number of seconds recorded for the LIU Digital Errors.ro Counter32 .1.3.6.1.4.1.644.2.4.2.2.2.2.1.7 |
hds3LIUAnalogErrsThis is the number of seconds recorded for the LIU Analog Errors.ro Counter32 .1.3.6.1.4.1.644.2.4.2.2.2.2.1.8 |
hds3LIUExcessZeroErrsThis is the number of seconds LIU Excess zero errors were detected.ro Counter32 .1.3.6.1.4.1.644.2.4.2.2.2.2.1.9 |
hds3LIUCodingViolationErrsThis is the total number of Errored Seconds for the LIU Coding Violation.ro Counter32 .1.3.6.1.4.1.644.2.4.2.2.2.2.1.10 |
hds3LIUPRBSCheckErrsThis is the total number of Errored Seconds for the LIU PRBS check.ro Counter32 .1.3.6.1.4.1.644.2.4.2.2.2.2.1.11 |
hds3LIUCmdStatusThis is the command status for the LIU Framer Row. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success or failure. Default Response State used in GET RESPONSE Command ready-for-command (0) initial default status for a row Commands used in SET Command (1..99) update (1) Can be used optionally when activating loops and berts in order to get status code back in response clearErrors (14) Resets all error counters and bert test time to zero Response States used in GET RESPONSE Command (100..199) update-successful (101) Test action has been successfully performed clear-successful (114) Error counts have been successfully cleared Error Codes used in GET RESPONSE Command (200..799) err-general-liu-error (200) Unknown LIU request error occurred. err-invalid-loop-type (202) Unrecognized loop selection err-invalid-bert-type (203) Unrecognized bert selection err-test-in-progress (205) Requested action cannot be performed during bert err-field-cannot-be-set (206) Read-only field was included in SET request err-invalid-command (208) Unrecognized Test Command requested err-snmp-parse-failed (500) Agent could not parse variable err-invalid-snmp-type (501) Variable ASN type does not match Agent defined type err-invalid-snmp-var-size (502) Variable size is too bigrw Enumeration .1.3.6.1.4.1.644.2.4.2.2.2.2.1.12 |
eriDNXHybridDS3MIBThe ERI Enterprise MIB Module for the DNX HDS3 Device. MODULE-IDENTITY .1.3.6.1.4.1.644.3.5 |