ERI-DNX-STS1-MIB
The ERI Enterprise MIB Module for the DNX STS1 Device.
Main OID:
eriDNXSts1MIB.1.3.6.1.4.1.644.3.4
65
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
65 total| Object Name |
|---|
dnxSTS1 OBJECT IDENTIFIER .1.3.6.1.4.1.644.2.4.2.3 |
dnxSTS1EnterpriseERI DNX STS1 Enterprise for Alarms/Events OBJECT IDENTIFIER .1.3.6.1.4.1.644.2.4.2.3.0 |
sts1MapperConfigTrapThis trap is used to notify a NMS that a user has updated the Link configuration for a given STS1 Mapper entry. NOTIFICATION-TYPE .1.3.6.1.4.1.644.2.4.2.3.0.1 |
sts1T1E1ConfigTrapThis trap is used to notify a NMS that a user has updated the Link configuration for a given STS-1 T1 channel entry. NOTIFICATION-TYPE .1.3.6.1.4.1.644.2.4.2.3.0.2 |
sts1Config OBJECT IDENTIFIER .1.3.6.1.4.1.644.2.4.2.3.1 |
sts1MapperConfigTableThis is the STS-1 Mapper LIU Configuration table which consists of an entry for each of the STS-1 cards. The total number of entries depends on the number of STS-1 cards in the nest. SEQUENCE OF STS1MapperConfigEntry .1.3.6.1.4.1.644.2.4.2.3.1.1 |
sts1MapperConfigEntryThe conceptual row of the STS-1 Mapper LIU Configuration table. A row in this table cannot be added or deleted, only modified. STS1MapperConfigEntry .1.3.6.1.4.1.644.2.4.2.3.1.1.1 |
sts1MapperAddrThis number uniquely identifies a STS-1 slot/mapper.ro LinkPortAddress (ERI-DNX-SMC-MIB) .1.3.6.1.4.1.644.2.4.2.3.1.1.1.1 |
sts1MapperResourceUniquely identifies an STS1 Device in the system. This number is provided as key to allow the manager to map this entry to a corresponding Resource Table entry.ro Integer32 .1.3.6.1.4.1.644.2.4.2.3.1.1.1.2 |
sts1VtGroup1Indicates the type of grouping option used to on links 1 through 4. Using the VT 2.0, link 4 is not used.ro VtGroupType .1.3.6.1.4.1.644.2.4.2.3.1.1.1.3 |
sts1VtGroup2Indicates the type of grouping option used to on links 5 through 8. Using the VT 2.0, link 8 is not used.ro VtGroupType .1.3.6.1.4.1.644.2.4.2.3.1.1.1.4 |
sts1VtGroup3Indicates the type of grouping option used to on links 9 through 12. Using the VT 2.0, link 12 is not used.ro VtGroupType .1.3.6.1.4.1.644.2.4.2.3.1.1.1.5 |
sts1VtGroup4Indicates the type of grouping option used to on links 13 through 16. Using the VT 2.0, link 16 is not used.ro VtGroupType .1.3.6.1.4.1.644.2.4.2.3.1.1.1.6 |
sts1VtGroup5Indicates the type of grouping option used to on links 17 through 20. Using the VT 2.0, link 20 is not used.ro VtGroupType .1.3.6.1.4.1.644.2.4.2.3.1.1.1.7 |
sts1VtGroup6Indicates the type of grouping option used to on links 21 through 24. Using the VT 2.0, link 24 is not used.ro VtGroupType .1.3.6.1.4.1.644.2.4.2.3.1.1.1.8 |
sts1VtGroup7Indicates the type of grouping option used to on links 25 through 28. Using the VT 2.0, link 28 is not used.ro VtGroupType .1.3.6.1.4.1.644.2.4.2.3.1.1.1.9 |
sts1VtMappingIndicates the Mapper Standard currently in use.ro Enumeration .1.3.6.1.4.1.644.2.4.2.3.1.1.1.10 |
sts1TimingIndicates whether the STS-1 device uses an internal or external clock source.rw Enumeration .1.3.6.1.4.1.644.2.4.2.3.1.1.1.11 |
sts1ShortCableIndicates the line build out of the STS-1 transmitter. 'enable' when attached to a cable less than 50 feet long.rw FunctionSwitch (ERI-DNX-SMC-MIB) .1.3.6.1.4.1.644.2.4.2.3.1.1.1.12 |
sts1MaprCmdStatusThe command status for this link configuration row/record. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success or failure. Default Response State used in GET RESPONSE Command ready-for-command (0) initial default status for a row STS1 Link Commands used in SET Command (1..199) update-link-config(1), Change existing Link Configuration Response States used in GET RESPONSE Command (200..399) update-successful (201) Link data has been successfully changed STS1 Mapper Config Error Codes used in GET RESPONSE Command (400..699) err-general-link-config-error (400) Unknown link configuration error occurred err-invalid-link-status (401) Unrecognized link status setting err-invalid-link-framing (402) Line framing type not valid for link type err-invalid-link-command (403) Unrecognized link command-action err-invalid-link-op-mode (407) Configured M13 Op mode not valid for port; verify other link parameters match desired new mode err-invalid-link-rem-loop (408) Remote Loop type not valid for sts1 frame type err-invalid-link-ais (409) Unrecognized sts1 AIS selection err-data-locked-by-another-user (450) Another administrative user is making changes to this part of the system via a terminal session. Check Event Log for user name err-snmp-parse-failed (500) Agent could not parse variable err-invalid-snmp-type (501) Variable ASN type does not match Agent defined type err-invalid-snmp-var-size (502) Variable size is too bigrw LinkCmdStatus (ERI-DNX-SMC-MIB) .1.3.6.1.4.1.644.2.4.2.3.1.1.1.13 |
sts1T1E1LinkConfigTableThis is the STS T1/E1 Link Configuration table which consists of an entry for each of the card's 28 links. The total number of entries depends on the number of STS1 cards in the nest. SEQUENCE OF STS1T1E1LinkConfigEntry .1.3.6.1.4.1.644.2.4.2.3.1.2 |
sts1T1E1LinkConfigEntryThe conceptual row of the STS T1/E1 Link Configuration table. A row in this table cannot be added or deleted, only modified. STS1T1E1LinkConfigEntry .1.3.6.1.4.1.644.2.4.2.3.1.2.1 |
sts1T1E1CfgLinkAddrThis number uniquely identifies a STS T1/E1 link resource. This number will be used throughout the system to identify a unique resource.ro LinkPortAddress (ERI-DNX-SMC-MIB) .1.3.6.1.4.1.644.2.4.2.3.1.2.1.1 |
sts1T1E1CfgResourceUniquely identifies an STS T1/E1 Channel in the system. This number is provided as key to allow the manager to map this entry to a corresponding Resource Table entry.ro Integer32 .1.3.6.1.4.1.644.2.4.2.3.1.2.1.2 |
sts1T1E1CfgLinkNameThis is the user friendly text name to identify the link.rw DisplayString .1.3.6.1.4.1.644.2.4.2.3.1.2.1.3 |
sts1T1E1StatusDictates the current status of the link, in-service or out-of-service.rw PortStatus (ERI-DNX-SMC-MIB) .1.3.6.1.4.1.644.2.4.2.3.1.2.1.4 |
sts1T1E1ClearDetermines if the port supports T1 or E1 unframed.rw Enumeration .1.3.6.1.4.1.644.2.4.2.3.1.2.1.5 |
sts1T1E1FramingDetermines the type of framing used on the line. Choose between T1 SuperFrame 'D4', Extended SuperFrame (ESF), or T1 Unframed. Currently E1 is not supported. When value of sts1T1E1Clear is set to unframed (2), the only valid framing options are: e1Unframed(4) or t1Unframed(7).rw Enumeration .1.3.6.1.4.1.644.2.4.2.3.1.2.1.6 |
sts1T1E1NetLoopDetermines whether or not the module should respond to loop diagnostic commands received from the network supplier. Select 'enable' unless the commands are to be passed to another STS1 device.rw FunctionSwitch (ERI-DNX-SMC-MIB) .1.3.6.1.4.1.644.2.4.2.3.1.2.1.7 |
sts1T1E1YelAlrmCauses the module to discard data and send a yellow alarm if it is in a red alarm condition after a 3 second period. 'Yes' must be chosen if the network supplier is a common carrier, such as a telephone company.rw DecisionType (ERI-DNX-SMC-MIB) .1.3.6.1.4.1.644.2.4.2.3.1.2.1.8 |
sts1T1E1RecoverTimeThis is the red alarm timeout value. Determines the amount of seconds the port will wait to stop sending the yellow alarm when coming out of a red alarm condition.rw Enumeration .1.3.6.1.4.1.644.2.4.2.3.1.2.1.9 |
sts1T1E1EsfFormatDetermines the type of ESF network commands the T-1 link will respond to. It has no meaning for D4 networks. With ESF networks, this information must be obtained from the network supplier.rw Enumeration .1.3.6.1.4.1.644.2.4.2.3.1.2.1.10 |
sts1T1E1IdleCodeDetermines the whether the code that will be transmitted over the unused links will be 'idle' or 'busy' (all 1's).rw Enumeration .1.3.6.1.4.1.644.2.4.2.3.1.2.1.11 |
sts1T1E1CfgCmdStatusThe command status for this link configuration row/record. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success or failure. Default Response State used in GET RESPONSE Command ready-for-command (0) initial default status for a row STS1-T1 Link Commands used in SET Command (1..199) update(1) Change existing Link Configuration inServiceAll (7) Change Link Status to in-service for all 8 links. copyToAll (9) Copy T1 Link configuration to all other links within the same device outOfServiceAll (12) Change Link Status to out-of-service for all 8 links. Response States used in GET RESPONSE Command (100..199) update-successful (101) Link data has been successfully changed insvc-successful (107) All Links have been successfully placed In Service copy-successful (109) T1 Link data has been successfully copied to other links oos-successful (112) All Links have been successfully placed Out of Service STS1-T1 Link Config Error Codes used in GET RESPONSE Command (400..699) err-general-link-config-error (400) Unknown link configuration error occurred err-invalid-link-status (401) Unrecognized link status setting err-invalid-link-framing (402) Line framing type not valid for link type err-invalid-link-command (403) Unrecognized link command-action err-invalid-esf-format (405) ESF type not applicable to link type err-invalid-link-density (406) Unrecognized T1 link density setting err-invalid-network-loop (410) Unrecognized network loop setting err-invalid-yellow-alrm (411) Unrecognized yellow alarm setting err-invalid-red-timeout (412) Unrecognized red alarm timeout err-invalid-idle-code (413) Unrecognized idle code err-device-in-standby (414) Can't change config for designated Standby device err-data-locked-by-another-user (450) Another administrative user is making changes to this part of the system via a terminal session. Check Event Log for user name err-snmp-parse-failed (500) Agent could not parse variable err-invalid-snmp-type (501) Variable ASN type does not match Agent defined type err-invalid-snmp-var-size (502) Variable size is too bigrw LinkCmdStatus (ERI-DNX-SMC-MIB) .1.3.6.1.4.1.644.2.4.2.3.1.2.1.12 |
sts1T1E1Gr303FacilityEnables link to be configured as a Gr303 Facilityroobsolete DecisionType (ERI-DNX-SMC-MIB) .1.3.6.1.4.1.644.2.4.2.3.1.2.1.13 |
sts1Diag OBJECT IDENTIFIER .1.3.6.1.4.1.644.2.4.2.3.2 |
sts1MapperStatusTableThis is the STS-1 Mapper Status table which consists of a single entry for each card's Mapper Display. The total number of entries depends on the number of STS1 cards in the node. SEQUENCE OF STS1MapperStatusEntry .1.3.6.1.4.1.644.2.4.2.3.2.1 |
sts1MapperStatusEntryThe conceptual row of the Mapper table. A row in this table cannot be added or deleted, only modified. STS1MapperStatusEntry .1.3.6.1.4.1.644.2.4.2.3.2.1.1 |
sts1MapperStatusAddrThis number uniquely identifies a STS1 Mapper resource. This number will be used throughout the system to identify a unique resource.ro LinkPortAddress (ERI-DNX-SMC-MIB) .1.3.6.1.4.1.644.2.4.2.3.2.1.1.1 |
sts1MapperStatusResourceThis number uniquely identifies a STS1 Mapper resource. This number is provided as key to allow the manager to map this entry to a corresponding Resource Table Entry.ro Integer32 .1.3.6.1.4.1.644.2.4.2.3.2.1.1.2 |
sts1MapperStatusStateDetermines the current line condition status of the Mapper. ok (0), lof (32), -- bit 5 lop (256), -- bit 8 oof (512), -- bit 9 ais (1024), -- bit 10 los (8192), -- bit 13 lomf (131072), -- bit 17 errors (2147483647) -- allro Enumeration .1.3.6.1.4.1.644.2.4.2.3.2.1.1.3 |
sts1MapperStatusLOSErrsThis is the number of seconds a Loss of Signal was declared.ro Counter32 .1.3.6.1.4.1.644.2.4.2.3.2.1.1.4 |
sts1MapperStatusOOFErrsThis is the number of seconds an Out Of Frame alignement error was declared.ro Counter32 .1.3.6.1.4.1.644.2.4.2.3.2.1.1.5 |
sts1MapperStatusLOFErrsThis is the number of seconds a Loss of Frame was declared.ro Counter32 .1.3.6.1.4.1.644.2.4.2.3.2.1.1.6 |
sts1MapperStatusLOPtrErrsThis is the number of seconds a Loss of Pointer was declared.ro Counter32 .1.3.6.1.4.1.644.2.4.2.3.2.1.1.7 |
sts1MapperStatusAISErrsThis is the number of seconds an Alarm Indication Signal was declared.ro Counter32 .1.3.6.1.4.1.644.2.4.2.3.2.1.1.8 |
sts1MapperStatusMultiFErrsThis is the number of seconds a Near End Loss of Multi-Frame Signal was declared.ro Counter32 .1.3.6.1.4.1.644.2.4.2.3.2.1.1.9 |
sts1MapperStatusRxTraceErrsThis is the number of seconds an error has been detected in the receive path trace.ro Counter32 .1.3.6.1.4.1.644.2.4.2.3.2.1.1.10 |
sts1MapperStatusTotErrSecsThis is the total number of Errored Seconds.ro Counter32 .1.3.6.1.4.1.644.2.4.2.3.2.1.1.11 |
sts1MapperStatusCmdStatusThis is the command status for the Mapper Row. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success or failure. Default Response State used in GET RESPONSE Command ready-for-command (0) initial default status for a row Action Commands used in SET Command (1..99) update (1) Can be used optionally when activating loops and berts in order to get status code back in response clearErrors (14) Resets all error counters to zero Response States used in GET RESPONSE Command (100..199) update-successful (101) Test action has been successfully performed clear-successful (114) Error counts have been successfully cleared The Error Codes used in GET RESPONSE Command (200..799) err-general-test-error (200) Unknown Test request error occurred. err-field-cannot-be-set (206) Read-only field was included in SET request err-snmp-parse-failed (500) Agent could not parse variable err-invalid-snmp-type (501) Variable ASN type does not match Agent defined type err-invalid-snmp-var-size (502) Variable size is too bigrw Enumeration .1.3.6.1.4.1.644.2.4.2.3.2.1.1.12 |
sts1LIUTableThis is the STS1 LIU Diagnostic Status table which consists of an entry for each STS1 card's Line Interface Unit Display. The number of entries depends on the number of STS1 cards in the node. SEQUENCE OF STS1LIUEntry .1.3.6.1.4.1.644.2.4.2.3.2.2 |
sts1LIUEntryThe conceptual row of the Mapper table. A row in this table cannot be added or deleted, only modified. STS1LIUEntry .1.3.6.1.4.1.644.2.4.2.3.2.2.1 |
sts1LIUAddrThis number uniquely identifies a STS1 Mapper resource address. This number will be used throughout the system to identify a unique resource.ro LinkPortAddress (ERI-DNX-SMC-MIB) .1.3.6.1.4.1.644.2.4.2.3.2.2.1.1 |
sts1LIUResourceThis number uniquely identifies a STS1 Mapper resource. This number is provided as a key to allow the manager to map this entry to a corresponding Resource Table Entry.ro Integer32 .1.3.6.1.4.1.644.2.4.2.3.2.2.1.2 |
sts1LIUBertStateThis is the LIU Bert State indicated by on/off.rw Enumeration .1.3.6.1.4.1.644.2.4.2.3.2.2.1.3 |
sts1LIUBertErrSecsThis is the number of LIU Bert Errored seconds.ro Counter32 .1.3.6.1.4.1.644.2.4.2.3.2.2.1.4 |
sts1LIUBertDurationThis is the number of seconds for the LIU Bert Duration.ro Counter32 .1.3.6.1.4.1.644.2.4.2.3.2.2.1.5 |
sts1LIULoopTypeIndicates the loopback status of the Mapper/LIU for this STS1 device. off (0) - indicates loopback is disabled mapper (1) - indicates Mapper local data is looped back to itself liu (39)- indicates Line Interface Unit local data is looped back to itself.rw Enumeration .1.3.6.1.4.1.644.2.4.2.3.2.2.1.6 |
sts1LIUDigitalErrsThis is the number of seconds recorded for the LIU Digital Errors.ro Counter32 .1.3.6.1.4.1.644.2.4.2.3.2.2.1.7 |
sts1LIUAnalogErrsThis is the number of seconds recorded for the LIU Analog Errors.ro Counter32 .1.3.6.1.4.1.644.2.4.2.3.2.2.1.8 |
sts1LIUExcessZerosThis is the number of seconds LIU Excess zero errors were detected.ro Counter32 .1.3.6.1.4.1.644.2.4.2.3.2.2.1.9 |
sts1LIUCodingViolationErrsThis is the total number of Errored Seconds for the LIU Coding Violation.ro Counter32 .1.3.6.1.4.1.644.2.4.2.3.2.2.1.10 |
sts1LIUPRBSErrsThis is the total number of Errored Seconds for the LIU PRBS check.ro Counter32 .1.3.6.1.4.1.644.2.4.2.3.2.2.1.11 |
sts1LIUCmdStatusThis is the command status for the LIU Mapper Row. The value used in a SET will be replaced by a response value in the GET RESPONSE indicating success or failure. Default Response State used in GET RESPONSE Command ready-for-command (0) initial default status for a row LIU Action Commands used in SET Command (1..99) update (1) Can be used optionally when activating loops and berts in order to get status code back in response clearErrors (14) Resets all error counters and bert test time to zero Response States used in GET RESPONSE Command (100..199) update-successful (101) Test action has been successfully performed clear-successful (114) Error counts have been successfully cleared LIU Test Error Codes used in GET RESPONSE Command (200..799) err-general-test-error (200) Unknown Test request error occurred. err-invalid-loop-type (202) Unrecognized loop selection err-invalid-bert-type (203) Unrecognized bert selection err-test-in-progress (205) Requested action cannot be performed during bert err-field-cannot-be-set (206) Read-only field was included in SET request err-snmp-parse-failed (500) Agent could not parse variable err-invalid-snmp-type (501) Variable ASN type does not match Agent defined type err-invalid-snmp-var-size (502) Variable size is too bigrw Enumeration .1.3.6.1.4.1.644.2.4.2.3.2.2.1.12 |
eriDNXSts1MIBThe ERI Enterprise MIB Module for the DNX STS1 Device. MODULE-IDENTITY .1.3.6.1.4.1.644.3.4 |