ERI-DNX-PERF-MONT-MIB
AI MIB Summary
The ERI-DNX-PERF-MONT-MIB enables performance monitoring of DNX-based network processors, specifically tracking DSx1 interface statistics and traffic metrics for enterprise routing hardware. This module provides access to counters and gauges essential for analyzing T1/E1 line performance, error rates, and throughput on Broadcom DNX chipset platforms.
The ERI Enterprise MIB Module for the DNX DSx1 Performance Monitoring.
Main OID:
eriDNXLinkPMStatsMIB.1.3.6.1.4.1.644.3.7
48
Objects
Active
Status
4
Dependencies
Imported Objects
Objects
48 total| Object Name |
|---|
performanceMonitoring OBJECT IDENTIFIER .1.3.6.1.4.1.644.2.4.4 |
dsx1Esf OBJECT IDENTIFIER .1.3.6.1.4.1.644.2.4.4.1 |
dsx1EsfCurrTableThis is the DS1/E1 ESF Current Statistics table which consists of an entry for each DS1 link in the system that is configured for T1 ESF lines. This table provides the counters for the current 15 minute time interval. SEQUENCE OF DSx1EsfCurrEntry .1.3.6.1.4.1.644.2.4.4.1.1 |
dsx1EsfCurrEntryThe conceptual row of the DS1/E1 ESF Statistics table. A row in this table cannot be added, deleted, or modified directly. Rows may be removed or added by configuring the DS1 line type via the appropriate Device Provisioning table. DSx1EsfCurrEntry .1.3.6.1.4.1.644.2.4.4.1.1.1 |
dsx1EsfCurrLinkAddrThis number uniquely identifies an DS1/E1 link resource. This number will be used throughout the system to identify a unique link. The format is represented using an IP address syntax (4 byte string). Note that the maximum valid link number will vary depending on the specified carrier and framing options. For example, an octal T1/E1 device has 8 DS1 links however the DS3 has 28 DS1 links. The 1st byte is reserved for future Nest Number use The 2nd byte represents the Slot Number (1-11) The 3rd byte represents the Link Number (1-84) The 4th byte is reserved for future usero LinkPortAddress (ERI-DNX-SMC-MIB) .1.3.6.1.4.1.644.2.4.4.1.1.1.1 |
dsx1EsfCurrResrcIdUniquely identifies a link in the system. This number is provided as key to allow the manager to map this entry to a corresponding Resource Table entry.ro Integer32 .1.3.6.1.4.1.644.2.4.4.1.1.1.2 |
dsx1EsfCurrESsThis is the number of errored seconds that have occurred on the link during the current interval. This is not incremented during an Unavailable Second. For ESF links an Errored Second is a second with the occurrence of a Loss of Frame or a CRC6 error in a one-second period.ro Gauge32 .1.3.6.1.4.1.644.2.4.4.1.1.1.3 |
dsx1EsfCurrUASsThis is the number of failed seconds (UAS) that have occurred on the link during the current interval. Unavailable Seconds (UAS) are calculated by counting the number of seconds that the interface is unavailable. Each second period during the occurrence of a Failed Signal State (ten consecutive SES) is known as a failed/unavailable second.ro Gauge32 .1.3.6.1.4.1.644.2.4.4.1.1.1.4 |
dsx1EsfCurrSESsThis is the number of severely errored seconds that have occurred on the link during the current interval. Controlled slips are not included in this parameter. This is not incremented during an Unavailable Second. A Severely Errored Second for ESF signals is a second period with 320 or more CRC6 errors.ro Gauge32 .1.3.6.1.4.1.644.2.4.4.1.1.1.5 |
dsx1EsfCurrBESsThis is the number of bursty errored seconds that have occurred on the T1 link during the current interval. This is not incremented during an Unavailable Second and applies to ESF signals only. A Bursty Errored Second is a second period with more than one but less than 320 CRC6 errors.ro Gauge32 .1.3.6.1.4.1.644.2.4.4.1.1.1.6 |
dsx1EsfCurrLOFsThis is the number of loss of frames that have occurred on the link during the current interval. A loss of frame occurs when either network equipment or the DTE senses errors in the framing pattern. Depending upon the equipment, this occurs when any 2 of 4, 2 of 5, or 3 of 5 consecutive terminal framing bits received contain bit errors in the framing pattern.ro Gauge32 .1.3.6.1.4.1.644.2.4.4.1.1.1.7 |
dsx1EsfCurrSecondsThe total number of seconds in the current interval.ro Gauge32 .1.3.6.1.4.1.644.2.4.4.1.1.1.8 |
dsx1EsfCurrIntervalsThe total number of valid 15 minute intervals counted since the link has been up and running.ro Gauge32 .1.3.6.1.4.1.644.2.4.4.1.1.1.9 |
dsx1EsfCurrStatusThis defines the status of the DS1/E1 link using an 8 character code which can contain numbers or letters. The codes are interpreted as follows: character #1 - 'F' or zero where 'F' indicates Failed Signal Status (FSS) if 'U' or 'L' are present. character #2 - 'U' or zero where 'U' indicates an unavailable signal state. character #3 through #6 are always zero. character #7 - 'L' or zero where 'L' indicates that the T1 line is in loop. character #8 - always zero.ro DisplayString .1.3.6.1.4.1.644.2.4.4.1.1.1.10 |
dsx1Esf24HrTableThis is the DS1/E1 24 Hour ESF Statistics table which consists of an entry for each DS1/E1 link in the system that is configured for T1 ESF lines. This table provides the total counters accumulated for last 24 hour period. SEQUENCE OF DSx1Esf24HrEntry .1.3.6.1.4.1.644.2.4.4.1.2 |
dsx1Esf24HrEntryThe conceptual row of the DS1/E1 24 Hour ESF Statistics table. A row in this table cannot be added, deleted, or modified directly. Rows may be removed or added by configuring the DS1 line type via the appropriate Device Provisioning table. DSx1Esf24HrEntry .1.3.6.1.4.1.644.2.4.4.1.2.1 |
dsx1Esf24HrLinkAddrThis number uniquely identifies an DS1/E1 link resource. This number will be used throughout the system to identify a unique link. The format is represented using an IP address syntax (4 byte string). Note that the maximum valid link number will vary depending on the specified carrier and framing options. For example, an octal T1/E1 device has 8 DS1 links but the DS3 has 28 DS1 links. The 1st byte is reserved for future Nest Number use The 2nd byte represents the Slot Number (1-11) The 3rd byte represents the Link Number (1-84) The 4th byte is reserved for future usero LinkPortAddress (ERI-DNX-SMC-MIB) .1.3.6.1.4.1.644.2.4.4.1.2.1.1 |
dsx1Esf24HrResrcIdUniquely identifies a link in the system. This number is provided as key to allow the manager to map this entry to a corresponding Resource Table entry.ro Integer32 .1.3.6.1.4.1.644.2.4.4.1.2.1.2 |
dsx1Esf24HrESsThis is the number of errored seconds that have occurred on the link during the past 24 hours.ro Gauge32 .1.3.6.1.4.1.644.2.4.4.1.2.1.3 |
dsx1Esf24HrUASsThis is the number of Unavailable Seconds (UAS) that have occurred on the T1 link during the past 24 hours.ro Gauge32 .1.3.6.1.4.1.644.2.4.4.1.2.1.4 |
dsx1Esf24HrSESsThis is the number of severely errored seconds that have occurred on the T1 link during the past 24 hours.ro Gauge32 .1.3.6.1.4.1.644.2.4.4.1.2.1.5 |
dsx1Esf24HrBESsThis is the number of bursty errored seconds that have occurred on the T1 link during the past 24 hours.ro Gauge32 .1.3.6.1.4.1.644.2.4.4.1.2.1.6 |
dsx1Esf24HrLOFsThis is the number of loss of frames that have occurred on the T1 link during the past 24 hours.ro Gauge32 .1.3.6.1.4.1.644.2.4.4.1.2.1.7 |
dsx1Esf96RegTableThis table is the ESF 96 Registers Table. It displays the 96 15 minute performance registers for each link on a card SEQUENCE OF DSx1Esf96RegEntry .1.3.6.1.4.1.644.2.4.4.1.3 |
dsx1Esf96RegEntryThe conceptual row of the DS1/E1 ESF 96 Registers table. A row in this table cannot be added, deleted, or modified directly. Rows may be removed or added by configuring the DS1 line type via the appropriate Device Provisioning table. DSx1Esf96RegEntry .1.3.6.1.4.1.644.2.4.4.1.3.1 |
dsx1Esf96RegLinkAddrUniquely identifies a link in the system. This number is provided as key to allow the manager to map this entry to a corresponding Resource Table entry.ro LinkPortAddress (ERI-DNX-SMC-MIB) .1.3.6.1.4.1.644.2.4.4.1.3.1.1 |
dsx1Esf96RegIntervalSpecifies the interval Number On a particular linkro Integer32 .1.3.6.1.4.1.644.2.4.4.1.3.1.2 |
dsx1Esf96RegESsThe number of Errored Seconds for a particular interval on a particular linkro Gauge32 .1.3.6.1.4.1.644.2.4.4.1.3.1.3 |
dsx1Esf96RegUASsThe number of Unavailable Seconds for a particular interval on a particular linkro Gauge32 .1.3.6.1.4.1.644.2.4.4.1.3.1.4 |
dsx1Esf96RegSESsThe number of Severely Errored Seconds for a particular interval on a particular linkro Gauge32 .1.3.6.1.4.1.644.2.4.4.1.3.1.5 |
dsx1Esf96RegBESsThe number of Bursty Errored Seconds for a particular interval on a particular linkro Gauge32 .1.3.6.1.4.1.644.2.4.4.1.3.1.6 |
dsx1G826 OBJECT IDENTIFIER .1.3.6.1.4.1.644.2.4.4.2 |
dsx1G826TableThis is the DS1/E1 G.826 Statistics table which consists of an entry for each DS1/E1 link in the system. This table provides the total counters accumulated since the link has been up or since the last time the counts were cleared. The counters are calculated in accordance with the ITU-T G.826 Error performance parameters, November 1993. SEQUENCE OF DSx1G826Entry .1.3.6.1.4.1.644.2.4.4.2.1 |
dsx1G826EntryThe conceptual row of the DS1/E1 G.826 Statistics table. A row in this table cannot be added or deleted directly but the counter time period can be reset to zero. Rows may be removed or added by configuring the DS1/E1 line type via the appropriate Device Provisioning tables. DSx1G826Entry .1.3.6.1.4.1.644.2.4.4.2.1.1 |
dsx1G826LinkAddrThis number uniquely identifies an DS1/E1 link resource. This number will be used throughout the system to identify a unique link. The format is represented using an IP address syntax (4 byte string). Note that the maximum valid link number will vary depending on the specified carrier and framing options. For example, an octal T1/E1 device has 8 DS1 links but the DS3 has 28 DS1 links. The 1st byte is reserved for future Nest Number use The 2nd byte represents the Slot Number (1-11) The 3rd byte represents the Link Number (1-84) The 4th byte is reserved for future usero LinkPortAddress (ERI-DNX-SMC-MIB) .1.3.6.1.4.1.644.2.4.4.2.1.1.1 |
dsx1G826ResrcIdUniquely identifies a link in the system. This number is provided as key to allow the manager to map this entry to a corresponding Resource Table entry.ro Integer32 .1.3.6.1.4.1.644.2.4.4.2.1.1.2 |
dsx1G826TotalTimeThis the total number of seconds the G.826 data has been collected. Resetting this to zero will clear the counters for specific link.rw Integer32 .1.3.6.1.4.1.644.2.4.4.2.1.1.3 |
dsx1G826ESsThis is the total number of errored seconds that have occurred since the link has been up or since the G.826 counters have been reset. An Errored Second for G.826 is a one second period with one or more errored blocks or at least one defect.ro Gauge32 .1.3.6.1.4.1.644.2.4.4.2.1.1.4 |
dsx1G826ErrFSsThis is the total number of error free seconds since the link has been up or since the G.826 counters have been reset.ro Gauge32 .1.3.6.1.4.1.644.2.4.4.2.1.1.5 |
dsx1G826SESsThis is the total number of severely errored seconds that have occurred since the link has been up or since the G.826 counters have been reset. A Severely Errored Second for G.826 is a one second period that contains 30% or more errored blocks OR at least one defect. This is a subset of ES.ro Gauge32 .1.3.6.1.4.1.644.2.4.4.2.1.1.6 |
dsx1G826ConsecSESsThis is the total number of continuous occurrences of SES, in a one second intervals, since the link has been up or since the G.826 counters have been reset.ro Gauge32 .1.3.6.1.4.1.644.2.4.4.2.1.1.7 |
dsx1G826ConsecErrFSsThis is the total number of consecutive seconds one second period intervals that did not have defects or errors since the link has been up or since the G.826 counters have been reset.ro Gauge32 .1.3.6.1.4.1.644.2.4.4.2.1.1.8 |
dsx1G826BGErrBlocksThis is the total number of background errored blocks that have occurred since the link has been up or since the G.826 counters have been reset. A Background Block Error for G.826 is an errored block not occurring as part of an SES.ro Gauge32 .1.3.6.1.4.1.644.2.4.4.2.1.1.9 |
dsx1G826ESRatioThis is the ratio of ES to total seconds in available time during a fixed measurement interval rounded to 2 decimals.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.644.2.4.4.2.1.1.10 |
dsx1G826SESRatioThis is the ratio of SES to total seconds in available time during a fixed measurement interval rounded to 2 decimals.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.644.2.4.4.2.1.1.11 |
dsx1G826BgBERRatioThis is the ratio of background block errors to total blocks in available time during a fixed measurement interval rounded to 2 decimals. This total block count excludes all blocks during SES.ro DisplayString (SNMPv2-TC) .1.3.6.1.4.1.644.2.4.4.2.1.1.12 |
dsx1G826UASsThis is the total number of Unavailable Seconds (UAS) that have occurred since the link has been up or since the G.826 counters have been reset.ro Gauge32 .1.3.6.1.4.1.644.2.4.4.2.1.1.13 |
eriDNXLinkPMStatsMIBThe ERI Enterprise MIB Module for the DNX DSx1 Performance Monitoring. MODULE-IDENTITY .1.3.6.1.4.1.644.3.7 |