EQUIPMENT-MIB
equipments MIB.
Main OID:
swEquipmentMIB.dlink-common-mgmt.11
138
Objects
Active
Status
5
Dependencies
Imported Objects
Objects
138 total| Object Name |
|---|
swEquipmentMIBequipments MIB. MODULE-IDENTITY .dlink-common-mgmt.11 |
swEquipment OBJECT IDENTIFIER .dlink-common-mgmt.11.1 |
swEquipmentCapacityIndicates the equipment capability supported in the system.ro Bits .dlink-common-mgmt.11.1.1 |
swFanTrapStateIndicate the fan warning event trap state.rw Enumeration .dlink-common-mgmt.11.1.4 |
swPowerTrapStateIndicate the power warning event trap state.rw Enumeration .dlink-common-mgmt.11.1.5 |
swPowerTableA list of power information values. SEQUENCE OF SwPowerEntry .dlink-common-mgmt.11.1.6 |
swPowerEntryAn entry of power information values. SwPowerEntry .dlink-common-mgmt.11.1.6.1 |
swPowerUnitIndexIndicates the unit ID in the System.ro INTEGER .dlink-common-mgmt.11.1.6.1.1 |
swPowerIDIndicates ID of the power
1 : main power
2 : redundant power .ro INTEGER .dlink-common-mgmt.11.1.6.1.2 |
swPowerStatusIndicates the current power status.
lowVoltage : The voltage of the power unit is too low.
overCurrent: The current of the power unit is too high.
working : The power unit is working normally.
fail : The power unit has failed.
connect : The power unit is connected but not powered on.
disconnect : The power unit is not connected.ro Enumeration .dlink-common-mgmt.11.1.6.1.3 |
swFanTableA list of fan information values. SEQUENCE OF SwFanEntry .dlink-common-mgmt.11.1.7 |
swFanEntryAn entry of fan information values. SwFanEntry .dlink-common-mgmt.11.1.7.1 |
swFanUnitIndexIndicates the unit ID in the System.ro INTEGER .dlink-common-mgmt.11.1.7.1.1 |
swFanIDIndicates the unit ID.ro INTEGER .dlink-common-mgmt.11.1.7.1.2 |
swFanStatusIndicates the current fan status.
speed-0 : If the fan function is normal and the fan does not spin
due to the temperature not reaching the threshold,
the status of the fan is speed 0.
speed-low : Fan spin using the lowest speed.
speed-middle: Fan spin using the middle speed.
speed-high : Fan spin using the highest speed.ro Enumeration .dlink-common-mgmt.11.1.7.1.3 |
swFanPostionIndicates the position of the fan.ro Enumeration .dlink-common-mgmt.11.1.7.1.4 |
swFanNumberIndicates the fan number.ro INTEGER .dlink-common-mgmt.11.1.7.1.5 |
swFanSpeedIndicates the fan work speed(RPM).ro INTEGER .dlink-common-mgmt.11.1.7.1.6 |
swTemperatureTableA list of temperature values. SEQUENCE OF SwTemperatureEntry .dlink-common-mgmt.11.1.8 |
swTemperatureEntryAn entry of temperature values. SwTemperatureEntry .dlink-common-mgmt.11.1.8.1 |
swTemperatureUnitIndexIndicates the unit ID in the System.ro INTEGER .dlink-common-mgmt.11.1.8.1.1 |
swTemperatureCurrentThe shelf current temperature.ro INTEGER(-500..500) .dlink-common-mgmt.11.1.8.1.2 |
swTemperatureHighThreshThe high threshold of shelf temperature.rw INTEGER (-500..500) .dlink-common-mgmt.11.1.8.1.3 |
swTemperatureLowThreshThe low threshold of shelf temperature.rw INTEGER(-500..500) .dlink-common-mgmt.11.1.8.1.4 |
swUnitMgmt OBJECT IDENTIFIER .dlink-common-mgmt.11.1.9 |
swUnitStackingVersionThis object indicates the version of this stacking system.ro INTEGER .dlink-common-mgmt.11.1.9.1 |
swUnitMaxSupportedUnitsThe maximum number of units that are supported in the system.ro INTEGER .dlink-common-mgmt.11.1.9.2 |
swUnitNumOfUnitThe current number of units.ro INTEGER .dlink-common-mgmt.11.1.9.3 |
swUnitMgmtTableThis table contains the unit information. SEQUENCE OF SwUnitMgmtEntry .dlink-common-mgmt.11.1.9.4 |
swUnitMgmtEntryA list of management information for each unit in the system. SwUnitMgmtEntry .dlink-common-mgmt.11.1.9.4.1 |
swUnitMgmtIdThis object indicates the specific entry in the stacking/chassis
table.ro INTEGER .dlink-common-mgmt.11.1.9.4.1.1 |
swUnitMgmtMacAddrThe MAC address of this unit.ro MacAddress (SNMPv2-TC) .dlink-common-mgmt.11.1.9.4.1.2 |
swUnitMgmtStartPortThis object indicates the starting port of this unit.ro INTEGER .dlink-common-mgmt.11.1.9.4.1.3 |
swUnitMgmtPortRangeThis object indicates the total ports of this unit.ro INTEGER .dlink-common-mgmt.11.1.9.4.1.4 |
swUnitMgmtFrontPanelLedStatusThis object is a set of system LED indicators. The first four
octets are defined as a system LED. The first LED is a power LED.
The second LED in the stacking module is a master LED but in the chassis is
a status LED. The third LED is a console LED. The fourth LED is
an RPS (Redundancy Power Supply) LED. The other octets are the
logical port LED (following dot1dBasePort ordering). Every two
bytes are presented to a port. The first byte is presented as the
link/activity LED. The second byte is presented as the speed LED.
system LED:
01 = fail/error/non existence.
02 = work normal.
link/activity LED :
The most significant bit is used for blinking/solid:
8 = The LED blinks.
The second most significant bit is used for link status:
1 = link fail.
2 = link pass.
speed LED :
01 = 10Mbps.
02 = 100Mbps.
03 = 1000Mbps.
The four remaining bits are currently unused and must be set to 0.
Note:
For the DGS-3700, the first five octets are defined as the system LED.
The first LED is the power LED. The second LED is the console LED.
The third LED is the RPS (Redundancy Power Supply) LED. The fourth
LED is the management port LED. The fifth LED is the fan LED.
For the DGS-3200-10 and DGS-3200-16, the first three octets are defined
as the system LED. The first LED is the power LED. The second LED is the console LED.
The third LED is the RPS (Redundancy Power Supply) LED.
For the DGS-3200-24, the first three octets are defined as the system LED,
the definition of the first three octets is the same as the DGS-3200-10 and DGS-3200-16,
the fourth LED is the SD card LED. The following description is for the SD card LED:
01 = SD card is not present.
02 = SD card is present.
03 = fails to read/write SD card.
04 = read/write SD card successfully.ro OCTET STRING .dlink-common-mgmt.11.1.9.4.1.5 |
swUnitMgmtCtrlModeThis object indicates the stacking mode the user configured for
the unit. This object can only be configured when the device is
in standalone mode.
other (1) - This object indicates the stacking mode that the user
has configured for the unit. This object can only be configured
when the device is in standalone mode.
auto (2) - The system will auto-assign a stacking role to this
unit to be: standalone(3), master(4), or slave(5).
standalone (3) - The unit is forced to be in standalone mode.
master (4) - The unit is forced to be in master mode. If this unit is
selected to be a master, the unit can modify the configuration of the stacking system.
slave (5) - The unit is forced to be in slave mode. If this unit is
selected to be a slave, it can only view the configuration of
the stacking system.rw Enumeration .dlink-common-mgmt.11.1.9.4.1.6 |
swUnitMgmtCurrentModeThe current stacking role of this unit.ro Enumeration .dlink-common-mgmt.11.1.9.4.1.7 |
swUnitMgmtVersionThis object indicates the version of this stacking unit.ro DisplayString .dlink-common-mgmt.11.1.9.4.1.8 |
swUnitMgmtModuleNameA textual string containing the stacking unit module name.ro DisplayString .dlink-common-mgmt.11.1.9.4.1.9 |
swUnitMgmtPromVersionA textual string containing the PROM version of the
stacking unit.ro DisplayString .dlink-common-mgmt.11.1.9.4.1.10 |
swUnitMgmtFirmwareVersionA textual string containing the firmware version of the
stacking unit.ro DisplayString .dlink-common-mgmt.11.1.9.4.1.11 |
swUnitMgmtHardwareVersionA textual string containing the hardware version of the
stacking unit.ro DisplayString .dlink-common-mgmt.11.1.9.4.1.12 |
swUnitMgmtPriorityThe Priority of the stacking unit.rw INTEGER .dlink-common-mgmt.11.1.9.4.1.13 |
swUnitMgmtUserSetStateThis object indicates the user set state of this unit.ro Enumeration .dlink-common-mgmt.11.1.9.4.1.14 |
swUnitMgmtExistStateThe state of existence of this unit.ro Enumeration .dlink-common-mgmt.11.1.9.4.1.15 |
swUnitMgmtBoxIdThe box ID of the stacking unit.
When show, it shows the current box ID of this unit;
When set, it sets the new box ID, and the new box ID will
take effect after the next boot.rw Enumeration .dlink-common-mgmt.11.1.9.4.1.16 |
swUnitMgmtSerialNumberA text string containing the serial number of the stacking unit.ro DisplayString (SNMPv2-TC) .dlink-common-mgmt.11.1.9.4.1.17 |
swUnitTopologyThe stacking topology state.ro Enumeration .dlink-common-mgmt.11.1.9.5 |
swUnitStackModeIndicates the stacking mode supported in the system.rw Enumeration .dlink-common-mgmt.11.1.9.6 |
swUnitStackForceMasterRoleIndicates the stack force master role mode supported in the system.rw Enumeration .dlink-common-mgmt.11.1.9.7 |
swUnitStackTrapStateIndicates the stacking trap state.rw Enumeration .dlink-common-mgmt.11.1.9.8 |
swUnitStackLogStateIndicates the stacking log state.rw Enumeration .dlink-common-mgmt.11.1.9.9 |
swExternalAlarmTableA list of the status of each of the alarm channels by this agent. SEQUENCE OF SwExternalAlarmEntry .dlink-common-mgmt.11.1.10 |
swExternalAlarmEntryAn entry containing objects with the status of each alarm channel. SwExternalAlarmEntry .dlink-common-mgmt.11.1.10.1 |
swExternalAlarmChannelThe number of the alarm channel.ro INTEGER .dlink-common-mgmt.11.1.10.1.1 |
swExternalAlarmMessageUsed to configure the alarm message when an alarm occurs on this channel.
If no alarm message is configured on this channel, a default alarm message will be generated.rw DisplayString .dlink-common-mgmt.11.1.10.1.2 |
swExternalAlarmStatusShows the current status of each alarm channel.ro Enumeration .dlink-common-mgmt.11.1.10.1.3 |
swEquipmentPowerSaving OBJECT IDENTIFIER .dlink-common-mgmt.11.1.11 |
swEquipPowerSavingLinkDetectStateIndicates the equipment reduced power consumption state.rw Enumeration .dlink-common-mgmt.11.1.11.1 |
swEquipPowerSavingLenDetectIndicates the equipment reduced power consumption state with a link partner.rw Enumeration .dlink-common-mgmt.11.1.11.2 |
swEquipPowerSavingHiberStateThis object indicates the power saving state of system hibernation.rw Enumeration .dlink-common-mgmt.11.1.11.3 |
swEquipPowerSavingPortLEDStateThis object indicates the power saving state of port LED.rw Enumeration .dlink-common-mgmt.11.1.11.4 |
swEquipPowerSavingPortStateThis object indicates the power saving state of port.rw Enumeration .dlink-common-mgmt.11.1.11.5 |
swEquipPowerSavingScheduleCtrl OBJECT IDENTIFIER .dlink-common-mgmt.11.1.11.6 |
swEquipPowerSavingHibernationTableA list of the system hibernation configurations of the power saving. SEQUENCE OF SwEquipPowerSavingHibernationEntry .dlink-common-mgmt.11.1.11.6.1 |
swEquipPowerSavingHibernationEntryAn entry containing the system hibernation configurations of the power saving. SwEquipPowerSavingHibernationEntry .dlink-common-mgmt.11.1.11.6.1.1 |
swEquipPowerSavingHiberRowStatusThis object indicates the status of this entry.rw RowStatus (SNMPv2-TC) .dlink-common-mgmt.11.1.11.6.1.1.100 |
swEquipPowerSavingPortLedTableA list of the port LED configurations of the power saving. SEQUENCE OF SwEquipPowerSavingPortLedEntry .dlink-common-mgmt.11.1.11.6.2 |
swEquipPowerSavingPortLedEntryAn entry containing the port LED configurations of the power saving. SwEquipPowerSavingPortLedEntry .dlink-common-mgmt.11.1.11.6.2.1 |
swEquipPowerSavingPortLedRowStatusThis object indicates the status of this entry.rw RowStatus (SNMPv2-TC) .dlink-common-mgmt.11.1.11.6.2.1.100 |
swEquipPowerSavingPortTableA list of the port configurations of the power saving. SEQUENCE OF SwEquipPowerSavingPortEntry .dlink-common-mgmt.11.1.11.6.3 |
swEquipPowerSavingPortEntryAn entry containing the port configurations of the power saving. SwEquipPowerSavingPortEntry .dlink-common-mgmt.11.1.11.6.3.1 |
swEquipPowerSavingPortIndexIndicates the module's port number.(1..Max port number in
the module). INTEGER .dlink-common-mgmt.11.1.11.6.3.1.1 |
swEquipPowerSavingPortRowStatusThis object indicates the status of this entry.rw RowStatus (SNMPv2-TC) .dlink-common-mgmt.11.1.11.6.3.1.100 |
swEquipEeeMgmt OBJECT IDENTIFIER .dlink-common-mgmt.11.1.11.20 |
swEquipEeeStateThis object indicates the EEE state of all ports.
Note:
If the port's bit has a value of '1', specifies the EEE (Energy Efficient Ethernet)
state of this port is 'Enabled',
otherwise, if the port's bit has a value of '0', specifies the EEE
state of this port is 'Disabled'.rw PortList (Q-BRIDGE-MIB) .dlink-common-mgmt.11.1.11.20.1 |
swEquipmentTemperatureCtrl OBJECT IDENTIFIER .dlink-common-mgmt.11.1.12 |
swTemperatureTrapStateThis object can enable or disable the warning temperature trap.rw Enumeration .dlink-common-mgmt.11.1.12.1 |
swTemperatureLogStateThis object can enable or disable the warning temperature log.rw Enumeration .dlink-common-mgmt.11.1.12.2 |
swEquipmentLEDCtrl OBJECT IDENTIFIER .dlink-common-mgmt.11.1.13 |
swEquipmentPortLEDStateThis object indicates the LED admin state of all ports.rw Enumeration .dlink-common-mgmt.11.1.13.1 |
swExternalAlarmStackingTableA list of the status of each of the alarm channels by this agent. SEQUENCE OF SwExternalAlarmStackingEntry .dlink-common-mgmt.11.1.15 |
swExternalAlarmStackingEntryAn entry containing objects with the status of each alarm channel. SwExternalAlarmStackingEntry .dlink-common-mgmt.11.1.15.1 |
swExternalAlarmStackingUnitIndexIndicates the unit ID in the System.. INTEGER .dlink-common-mgmt.11.1.15.1.1 |
swExternalAlarmStackingChannelThe number of the alarm channel. INTEGER .dlink-common-mgmt.11.1.15.1.2 |
swExternalAlarmStackingMessageUsed to configure the alarm message when an alarm occurs on this channel.
If no alarm message is configured on this channel, a default alarm message will be generated.rw DisplayString .dlink-common-mgmt.11.1.15.1.3 |
swExternalAlarmStackingStatusShows the current status of each alarm channel.ro Enumeration .dlink-common-mgmt.11.1.15.1.4 |
swEquipmentNotify OBJECT IDENTIFIER .dlink-common-mgmt.11.2 |
swEquipmentNotifyMgmt OBJECT IDENTIFIER .dlink-common-mgmt.11.2.1 |
swEquipUnitNotifyMgmt OBJECT IDENTIFIER .dlink-common-mgmt.11.2.1.1 |
swUnitInsertSeverityIndicates the swUnitInsert detection level.rw AgentNotifyLevel (DLINK-ID-REC-MIB) .dlink-common-mgmt.11.2.1.1.1 |
swUnitRemoveSeverityIndicates the swUnitRemove detection level.rw AgentNotifyLevel (DLINK-ID-REC-MIB) .dlink-common-mgmt.11.2.1.1.2 |
swUnitFailureSeverityIndicates the swUnitFailure detection level.rw AgentNotifyLevel (DLINK-ID-REC-MIB) .dlink-common-mgmt.11.2.1.1.3 |
swEquipPowerNotifyMgmt OBJECT IDENTIFIER .dlink-common-mgmt.11.2.1.2 |
swPowerStatusChgSeverityIndicates the swPowerStatusChg detection level.rw AgentNotifyLevel (DLINK-ID-REC-MIB) .dlink-common-mgmt.11.2.1.2.1 |
swPowerFailureSeverityIndicates the swPowerFailure detection level.rw AgentNotifyLevel (DLINK-ID-REC-MIB) .dlink-common-mgmt.11.2.1.2.2 |
swPowerRecoverSeverityIndicates the swPowerRecover detection level.rw AgentNotifyLevel (DLINK-ID-REC-MIB) .dlink-common-mgmt.11.2.1.2.3 |
swEquipFanNotifyMgmt OBJECT IDENTIFIER .dlink-common-mgmt.11.2.1.3 |
swFanFailureSeverityIndicates the swFanFailure detection level.rw AgentNotifyLevel (DLINK-ID-REC-MIB) .dlink-common-mgmt.11.2.1.3.1 |
swFanRecoverSeverityIndicates the swFanRecover detection level.rw AgentNotifyLevel (DLINK-ID-REC-MIB) .dlink-common-mgmt.11.2.1.3.2 |
swEquipTemperatureNotifyMgmt OBJECT IDENTIFIER .dlink-common-mgmt.11.2.1.4 |
swHighTemperatureSeverityIndicates the swHighTemperature detection level.rw AgentNotifyLevel (DLINK-ID-REC-MIB) .dlink-common-mgmt.11.2.1.4.1 |
swHighTemperatureRecoverSeverityIndicates the swHighTemperatureRecover detection level.rw AgentNotifyLevel (DLINK-ID-REC-MIB) .dlink-common-mgmt.11.2.1.4.2 |
swLowTemperatureSeverityIndicates the swLowTemperature detection level.rw AgentNotifyLevel (DLINK-ID-REC-MIB) .dlink-common-mgmt.11.2.1.4.3 |
swLowTemperatureRecoverSeverityIndicates the swLowTemperatureRecover detection level.rw AgentNotifyLevel (DLINK-ID-REC-MIB) .dlink-common-mgmt.11.2.1.4.4 |
swEquipmentNotification OBJECT IDENTIFIER .dlink-common-mgmt.11.2.2 |
swEquipUnitNotification OBJECT IDENTIFIER .dlink-common-mgmt.11.2.2.1 |
swEquipUnitNotifyPrefix OBJECT IDENTIFIER .dlink-common-mgmt.11.2.2.1.0 |
swUnitInsertUnit Hot Insert notification. NOTIFICATION-TYPE .dlink-common-mgmt.11.2.2.1.0.1 |
swUnitRemoveUnit Hot Remove notification. NOTIFICATION-TYPE .dlink-common-mgmt.11.2.2.1.0.2 |
swUnitFailureUnit Failure notification. NOTIFICATION-TYPE .dlink-common-mgmt.11.2.2.1.0.3 |
swUnitTPChangeThe stacking topology change notification. NOTIFICATION-TYPE .dlink-common-mgmt.11.2.2.1.0.4 |
swUnitRoleChangeThe stacking unit role change notification. NOTIFICATION-TYPE .dlink-common-mgmt.11.2.2.1.0.5 |
swEquipPowerNotification OBJECT IDENTIFIER .dlink-common-mgmt.11.2.2.2 |
swEquipPowerNotifyPerfix OBJECT IDENTIFIER .dlink-common-mgmt.11.2.2.2.0 |
swPowerStatusChgPower Status change notification. The notification is issued
when the swPowerStatus changes in the following cases:
lowVoltage -> overCurrent.
lowVoltage -> working.
lowVoltage -> disconnect.
lowVoltage -> connect.
overCurrent -> lowVoltage.
overCurrent -> working.
overCurrent -> disconnect.
overCurrent -> connect.
working -> lowVoltage.
working -> overCurrent.
working -> connect.
working -> disconnect.
fail -> connect.
fail -> disconnect.
connect -> lowVoltage.
connect -> overCurrent.
connect -> working.
connect -> disconnect.
disconnect -> lowVoltage.
disconnect -> overCurrent.
disconnect -> working.
disconnect -> connect. NOTIFICATION-TYPE .dlink-common-mgmt.11.2.2.2.0.1 |
swPowerFailurePower Failure notification. The notification is issued
when the swPowerStatus changes in the following cases:
lowVoltage -> fail.
overCurrent -> fail.
working -> fail.
connect -> fail.
disconnect -> fail. NOTIFICATION-TYPE .dlink-common-mgmt.11.2.2.2.0.2 |
swPowerRecoverPower Recover notification. The notification is issued
when the swPowerStatus changes in the following cases:
fail -> lowVoltage.
fail -> overCurrent.
fail -> working. NOTIFICATION-TYPE .dlink-common-mgmt.11.2.2.2.0.3 |
swEquipFanNotification OBJECT IDENTIFIER .dlink-common-mgmt.11.2.2.3 |
swEquipFanNotifyPrefix OBJECT IDENTIFIER .dlink-common-mgmt.11.2.2.3.0 |
swFanFailureFan Failure notification. NOTIFICATION-TYPE .dlink-common-mgmt.11.2.2.3.0.1 |
swFanRecoverFan Recover notification. NOTIFICATION-TYPE .dlink-common-mgmt.11.2.2.3.0.2 |
swEquipTemperatureNotification OBJECT IDENTIFIER .dlink-common-mgmt.11.2.2.4 |
swEquipTemperatureNotifyPrefix OBJECT IDENTIFIER .dlink-common-mgmt.11.2.2.4.0 |
swHighTemperatureHigh Temperature notification. NOTIFICATION-TYPE .dlink-common-mgmt.11.2.2.4.0.1 |
swHighTemperatureRecoverHigh Temperature notification. NOTIFICATION-TYPE .dlink-common-mgmt.11.2.2.4.0.2 |
swLowTemperatureLow Temperature notification. NOTIFICATION-TYPE .dlink-common-mgmt.11.2.2.4.0.3 |
swLowTemperatureRecoverLow Temperature notification. NOTIFICATION-TYPE .dlink-common-mgmt.11.2.2.4.0.4 |
swEquipExternalAlarmNotification OBJECT IDENTIFIER .dlink-common-mgmt.11.2.2.5 |
swEquipExternalAlarmNotifyPrefix OBJECT IDENTIFIER .dlink-common-mgmt.11.2.2.5.0 |
swExternalAlarmThe notice of an Alarm in the specified channel. NOTIFICATION-TYPE .dlink-common-mgmt.11.2.2.5.0.1 |
swExternalAlarmStackingThe notice of an Alarm in the specified channel. NOTIFICATION-TYPE .dlink-common-mgmt.11.2.2.5.0.2 |
swNotificationBindings OBJECT IDENTIFIER .dlink-common-mgmt.11.2.3 |
swEquipTemperNotifyBindings OBJECT IDENTIFIER .dlink-common-mgmt.11.2.3.1 |
swTemperSensorIDThis object indicates the ID of the temperature sensor in the unit.ro INTEGER .dlink-common-mgmt.11.2.3.1.1 |
swEquipUnitNotifyBindings OBJECT IDENTIFIER .dlink-common-mgmt.11.2.3.2 |
swStackTopologyTypeThis object indicates the MAC address of the switch.ro Enumeration .dlink-common-mgmt.11.2.3.2.1 |
swStackRoleChangeTypeThis object indicates the role information of the switch.ro Enumeration .dlink-common-mgmt.11.2.3.2.2 |