EQLRAID-MIB

AI MIB Summary

The EQLRAID-MIB module enables SNMP-based monitoring and management of RAID subsystem status, disk health, and array configuration parameters on EqualLogic storage arrays. It provides specific metrics for drive failure detection, rebuild progress, and logical volume states to facilitate proactive storage infrastructure maintenance.

Equallogic Inc. Storage Array raid mib Copyright (c) 2002-2005 by EqualLogic, Inc. All rights reserved. This software may not be copied, disclosed, transferred, or used except in accordance with a license granted by EqualLogic, Inc. This software embodies proprietary information and trade secrets of EqualLogic, Inc.

Main OID:

eqlRAIDModule.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10

Objects

Active

Status

Dependencies

Imported Objects

Objects

51 total

Object Name	Syntax	OID
eqlRAIDModuleEquallogic Inc. Storage Array raid mib Copyright (c) 2002-2005 by EqualLogic, Inc. All rights reserved. This software may not be copied, disclosed, transferred, or used except in accordance with a license granted by EqualLogic, Inc. This software embodies proprietary information and trade secrets of EqualLogic, Inc. MODULE-IDENTITY `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10`	MODULE-IDENTITY	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10`
eqlRAIDObjects OBJECT IDENTIFIER `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1`
eqlRAIDDeviceTableEqualLogic-Dynamic Table representing a list of all of the RAID devices in a group SEQUENCE OF EqlRAIDDeviceEntry `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.1`	SEQUENCE OF EqlRAIDDeviceEntry	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.1`
eqlRAIDDeviceEntryA sequence of attributes pertaining to a single RAID device in a group EqlRAIDDeviceEntry `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.1.1`	EqlRAIDDeviceEntry	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.1.1`
eqlRAIDDeviceLUNIndexThe LUN number of the RAID device, incremented by one for SNMP compatibility. Valid LUN numbers begin at zero.ro Integer32 `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.1.1.1`	Integer32	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.1.1.1`
eqlRAIDDeviceLUNThe LUN of the drive. In all cases the value of this variable will be equal to eqlRAIDDeviceLUNIndex-1.ro Integer32 `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.1.1.2`	Integer32	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.1.1.2`
eqlRAIDDeviceOperStatusThe operational status of the RAID device. Values are as follows: 1 - no device 2 - data loss 3 - nominal 4 - degraded 5 - failedro Enumeration `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.1.1.3`	Enumeration	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.1.1.3`
eqlRAIDDeviceUUIDa 16 byte identifier for the device that is guranteed to be universally uniquero OCTET STRING `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.1.1.4`	OCTET STRING	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.1.1.4`
eqlRAIDDeviceDriveCountThe number of drives used by the RAID devicero Integer32 `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.1.1.5`	Integer32	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.1.1.5`
eqlRAIDDeviceLayoutOperStatusThe status of the currently executing layout operation on the device (if any) 1 - no operation in progress 2 - exp suspended 3 - exp in progress 4 - swap suspended 5 - swap in progressro Enumeration `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.1.1.6`	Enumeration	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.1.1.6`
eqlRAIDDeviceLayoutSectPerSUThe number of sectors per stripe unit in this layoutro Integer32 `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.1.1.7`	Integer32	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.1.1.7`
eqlRAIDDeviceLUNCapacityThe current LUN capacity of this layout in sectors, including internal layout operationsro Counter64 `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.1.1.8`	Counter64	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.1.1.8`
eqlRAIDDeviceLostBlocksThe count of bad soft sectorsro Integer32 `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.1.1.9`	Integer32	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.1.1.9`
eqlRAIDDeviceOutIOOpsTh number of I/O operations currently in progress on the devicero Integer32 `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.1.1.10`	Integer32	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.1.1.10`
eqlRAIDDeviceCacheWritesThe count of the number of cache write operations in progress on the devicero Integer32 `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.1.1.11`	Integer32	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.1.1.11`
eqlRAIDDeviceCacheReadsThe count of the number of cache read operations in progress on the devicero Integer32 `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.1.1.12`	Integer32	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.1.1.12`
eqlRAIDDeviceCompCacheWritesThe number of completed cache write operations since the system was startedro Counter64 `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.1.1.13`	Counter64	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.1.1.13`
eqlRAIDDeviceCompCacheReadsThe number of completed cache read operations since the system was startedro Counter64 `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.1.1.14`	Counter64	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.1.1.14`
eqlRAIDDeviceSectWrittenThe number of sectors written since the system was startedro Counter64 `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.1.1.15`	Counter64	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.1.1.15`
eqlRAIDDeviceSectReadThe number of sectors read since the system was startedro Counter64 `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.1.1.16`	Counter64	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.1.1.16`
eqlRAIDDeviceStoragePoolIndexThis field specifies a unique index for identifying a storage pool. Unsigned32 `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.1.1.17`	Unsigned32	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.1.1.17`
eqlRAIDDeviceDriveGroupIndexThis field specifies a unique index for identifying a drive group. Unsigned32 `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.1.1.18`	Unsigned32	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.1.1.18`
eqlRAIDLayoutTableEqualLogic-Dynamic Table listing the layouts in existence in a RAID device. Typically, there will only be a single entry for each device. When layout operations are in progress, there will be two layouts. The layout represents a set of drives and a parity configuration for the drives. SEQUENCE OF EqlRAIDLayoutEntry `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.2`	SEQUENCE OF EqlRAIDLayoutEntry	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.2`
eqlRAIDLayoutEntrya sequence of attributes belonging to a single layout group EqlRAIDLayoutEntry `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.2.1`	EqlRAIDLayoutEntry	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.2.1`
eqlRAIDLayoutIndexAn identifier for this instance of a layout. The layouts are 1-indexed where the primary is index 1, and the secindary (if any) is index 2ro Enumeration `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.2.1.1`	Enumeration	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.2.1.1`
eqlRAIDLayoutOperStatusOperational status of the layout as follows: 1 - no device 2 - no layout 3 - failed 4 - nominal 5 - degradedro Enumeration `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.2.1.2`	Enumeration	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.2.1.2`
eqlRAIDLayoutNumParityGrpThe number of parity groups in this layoutro Integer32 `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.2.1.3`	Integer32	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.2.1.3`
eqlRAIDLayoutParityTypeThe parity type of this layout: 0 - stripe 1 - raid1 mirror 10- raid10 multi raid1 parity groups 5 - raid5 50- multi raid5 parity groupsro Enumeration `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.2.1.4`	Enumeration	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.2.1.4`
eqlRAIDLayoutBeginLBAThe beginning RAID LBA of this layoutro Counter64 `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.2.1.5`	Counter64	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.2.1.5`
eqlRAIDLayoutLengthLength in sectors of this layout. This value can be used to determine the progress of layout operations.ro Counter64 `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.2.1.6`	Counter64	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.2.1.6`
eqlRAIDParityGroupTableEqualLogic-Dynamic Table. Each layout on a RAID device has one or more parity groups. The groups are indexed starting at 1. Each group represents a set of drives consisting of one stripe and one parity drive with one or more data drives. Each groups is reconstructed and verified as a whole and can be done so independently of other partity groups in the set. RAID 0, 1, and 5 have only one parity grouping per layout. RAID 10 and 50 have multiple parity groups per layout. SEQUENCE OF EqlRAIDParityGroupEntry `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.3`	SEQUENCE OF EqlRAIDParityGroupEntry	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.3`
eqlRAIDParityGroupEntrya sequence of attributes belonging to a single parity group EqlRAIDParityGroupEntry `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.3.1`	EqlRAIDParityGroupEntry	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.3.1`
eqlParityGrpIndexA numeric index describing the instance of this parity groupro Integer32 `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.3.1.1`	Integer32	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.3.1.1`
eqlParityGrpOperStatusThe operational status of the parity group: 1 - no device 2 - no layout 3 - no group 4 - degraded 4 - failed 5 - nominalro Enumeration `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.3.1.2`	Enumeration	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.3.1.2`
eqlParityGrpDriveCountThe number of drives in the parity groupro Integer32 `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.3.1.3`	Integer32	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.3.1.3`
eqlParityGrpOperationThe current parity group operation underway on this group (if any): 1 - verify 2 - reconstruct 3 - no operationro Enumeration `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.3.1.4`	Enumeration	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.3.1.4`
eqlParityGrpReconstChkptReconstruction checkpoint: The number of sectors that have been completed during the reconstruction operation. This can be compared to the corresonding value for eqlRAIDLayoutLength and eqlRAIDLayoutBeginLBA to setermine the progress of the operation.ro Counter64 `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.3.1.5`	Counter64	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.3.1.5`
eqlParityGrpVerifyChkptVerify checkpoint: The number of sectors that have been completed during the verify operation. This can be compared to the corresonding value for eqlRAIDLayoutLength and eqlRAIDLayoutBeginLBA to setermine the progress of the operation.ro Counter64 `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.3.1.6`	Counter64	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.3.1.6`
eqlRAIDDriveTableEqualLogic-Dynamic Table. The RAID Drive Table contains an entry for each drive in the system. The mapping between the enties in this table and the entries in the eqlDisk table is one to one. This table is intended to store the RAID attributes of each drive. SEQUENCE OF EqlRAIDDriveEntry `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.4`	SEQUENCE OF EqlRAIDDriveEntry	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.4`
eqlRAIDDriveEntrya sequence of RAID attributes for a single drive in the group EqlRAIDDriveEntry `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.4.1`	EqlRAIDDriveEntry	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.4.1`
eqlRAIDDriveDriveLUNIndexThe LUN index of the drive. In all cases the value of the index will be one greater than the value of the LUN ID of this drive. Thus, where LUNs will start at the number 0 and increment, LUN index entries will start at the number one and increment.ro Integer32 `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.4.1.1`	Integer32	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.4.1.1`
eqlRAIDDriveDriveLUNThe LUN of the drive. In all cases the value of this variable will be equal to eqlRAIDDriveLUNIndex-1.ro Integer32 `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.4.1.2`	Integer32	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.4.1.2`
eqlRAIDDriveOperStatusOperational status of the drive: 1 - no drive 2 - active 3 - failed 4 - too small 5 - reconstructing 6 - swapping 7 - sparero Enumeration `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.4.1.3`	Enumeration	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.4.1.3`
eqlRAIDDriveUUIDA 16 byte univerally unique identifier for the drive. This should be unique throughout the universe of drives in EqualLogic arrays.ro OCTET STRING `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.4.1.4`	OCTET STRING	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.4.1.4`
eqlRAIDDiskIndexThe index value that uniquely identifies the disk. It is equal to the disk slot number plus one. The value of this will correspond to a value of eqlDiskIndex in the eqlDiskTable.ro Integer32 `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.4.1.5`	Integer32	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.4.1.5`
eqlRAIDDeviceIndexThe index of the device this disk belongs to. It is equal to a value of eqlRAIDDeviceLUNIndex in the eqlRAIDDeviceTable.ro Integer32 `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.4.1.6`	Integer32	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.4.1.6`
eqlStoragePoolRAIDLUNTableEqualLogic-Dynamic Storage Pool RAID LUN Table SEQUENCE OF EqlStoragePoolRAIDLUNEntry `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.5`	SEQUENCE OF EqlStoragePoolRAIDLUNEntry	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.5`
eqlStoragePoolRAIDLUNEntryAn entry (row) containing a RAID LUN mapping to a storage pool. EqlStoragePoolRAIDLUNEntry `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.5.1`	EqlStoragePoolRAIDLUNEntry	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.5.1`
eqlStoragePoolRAIDLUNfooBogusro Integer32 `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.5.1.1`	Integer32	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.1.5.1.1`
eqlRAIDNotifications OBJECT IDENTIFIER `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.2`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.2`
eqlRAIDConformance OBJECT IDENTIFIER `.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.3`	OBJECT IDENTIFIER	`.1.3.6.1.4.1.1.3.6.1.4.1.12740.12740.10.3`