Home/Catalog/EQLGROUP-MIB

EQLGROUP-MIB

AI MIB Summary

The EQLGROUP-MIB facilitates the monitoring and management of Dell EqualLogic storage array group configurations, specifically exposing metrics related to group membership, member device status, and group-level operational parameters via SNMP. This module enables administrators to track the health and topology of storage clusters by querying group identifiers, member counts, and associated state transitions.

Equallogic Inc. group information Copyright (c) 2002-2013 by Dell Inc. All rights reserved. This software may not be copied, disclosed, transferred, or used except in accordance with a license granted by Dell Inc. This software embodies proprietary information and trade secrets of Dell Inc.
Main OID:
eqlgroupModule.1.3.6.1.4.1.12740.1
353
Objects
Active
Status
4
Dependencies

Imported Objects

SNMPv2-TC
SNMPv2-SMI
EQUALLOGIC-SMI
INET-ADDRESS-MIB

Objects

353 total
Object Name
eqlgroupModuleEquallogic Inc. group information Copyright (c) 2002-2013 by Dell Inc. All rights reserved. This software may not be copied, disclosed, transferred, or used except in accordance with a license granted by Dell Inc. This software embodies proprietary information and trade secrets of Dell Inc.
MODULE-IDENTITY
.1.3.6.1.4.1.12740.1
eqlgroupObjects
OBJECT IDENTIFIER
.1.3.6.1.4.1.12740.1.1
eqlStorageGroupTableEqualLogic-Persistent Storage Group Table
SEQUENCE OF EqlStorageGroupEntry
.1.3.6.1.4.1.12740.1.1.1
eqlStorageGroupEntryAn entry (row) containing storage group information.
EqlStorageGroupEntry
.1.3.6.1.4.1.12740.1.1.1.1
eqlGroupIdThis index uniquely identifies the group. This index should always be 1.
Integer32
.1.3.6.1.4.1.12740.1.1.1.1.1
eqlGroupIsSingleSubnetThis field is used to indicate whether or not all the arrays within a group are located in the same subset. The default is single-subnet.rw
Enumeration
.1.3.6.1.4.1.12740.1.1.1.1.2
eqlGroupDefaultGatewayIpAddressThis field is deprecated.rwdeprecated
INTEGER
.1.3.6.1.4.1.12740.1.1.1.1.3
eqlGroupDefaultMaskThis field is deprecated.rw
IpAddress
.1.3.6.1.4.1.12740.1.1.1.1.4
eqlGroupDefaultRoutingProtocolThis field is used to indicate the routing protocol use when a group spans multiple subnets. The support protocols are RIP and OFPS. The default value is none.rw
Enumeration
.1.3.6.1.4.1.12740.1.1.1.1.5
eqlGroupIsStorageOptimizationThis field is used to indicate whether the Storage Pool is optimized for capacity (RAID 5/50) or performance (RAID 10). The default is capacity.rw
Enumeration
.1.3.6.1.4.1.12740.1.1.1.1.6
eqlGroupDiskAddWaitTimeThis field is used to indicated how long to wait in minutes before including newly inserted drives into the RAID set. The delay allows for multiple drives to be inserted before the expansion begins. The default is 2 minutes.rw
Integer32
.1.3.6.1.4.1.12740.1.1.1.1.7
eqlGroupDefaultLanguageThis field is deprecated.rwdeprecated
INTEGER
.1.3.6.1.4.1.12740.1.1.1.1.8
eqlGroupDefaultSnapshotSizeThis field is used to specify by default what percentage of a volume is reserved for SnapShots. The default is 100%. It can be overriden on a per volume basis. If a volume, testvol, is 100MB, and the GroupDefaultSnapshotsize is 100%, than 100MB will reserved for SnapShots of testvol.rw
Integer32
.1.3.6.1.4.1.12740.1.1.1.1.9
eqlGroupDefaultSnapshotWarningLevelThis field is used to specify by default when the administrator is warned that the space used for SnapShots close to being exhausted. The default is 20%. It can be overriden on a per volume basis.rw
Integer32
.1.3.6.1.4.1.12740.1.1.1.1.10
eqlGroupDefaultSnapshotDeletePolicyThis field specifies what should happen when the space reserved for SnapShots is exhuasted. The default is delete-oldest SnapShot.rw
Enumeration
.1.3.6.1.4.1.12740.1.1.1.1.11
eqlGroupTimeZoneThe field specifies the default timezone for the group HST (GMT-10:00) Hawaiian Standard Time: Pacific/Honolulu, AST (GMT-09:00) Alaskan Standard Time: America/Anchorage, PST (GMT-08:00) Pacific Standard Time: America/Los_Angeles, PNT (GMT-07:00) America/Phoenix, MST (GMT-07:00) US Mountain Standard Time: America/Denver, CST (GMT-06:00) Central Standard Time: America/Chicago, EST (GMT-05:00) Eastern Standard Time: America/New_York, IET (GMT-05:00) America/Indiana/Indianapolis, PRT (GMT-04:00) Atlantic Standard Time: America/Halifax, GMT (GMT-00:00) Greenwich Mean Time: GMT, ECT (GMT+01:00) Romance Standard Time: Europe/Paris, EET (GMT+02:00) Egypt Standard Time: Africa/Cairo, EAT (GMT+03:00) Saudi Arabia Standard Time: Asia/Riyadh, MET (GMT+03:30) Iran Standard Time: Asia/Tehran, NET (GMT+04:00) Arabian Standard Time: Asia/Yerevan, PLT (GMT+05:00) West Asia Standard Time: Asia/Karachi, IST (GMT+05:30) India Standard Time: Asia/Calcutta, BST (GMT+06:00) Central Asia Standard Time: Asia/Dacca, VST (GMT+07:00) Bangkok Standard Time: Asia/Bangkok, CTT (GMT+08:00) China Standard Time: Asia/Shanghai, JST (GMT+09:00) Tokyo Standard Time: Asia/Tokyo, ACT (GMT+09:30) Cen. Australia Standard Time: Australia/Darwin, AET (GMT+10:00) Sydney Standard Time: Australia/Sydney, SST (GMT+11:00) Central Pacific Standard Time: Pacific/Guadalcanal, NST (GMT+12:00) New Zealand Standard Time: Pacific/Fiji, MIT (GMT+13:00) Samoa Standard Time: Pacific/Apia, CNT (GMT-03:30) Newfoundland Standard Time: America/St_Johns, AGT (GMT-03:00) SA Eastern Standard Time: America/Buenos_Aires, BET (GMT-03:00) E South America Standard Time: America/Sao_Paulo, CAT (GMT-01:00) Azores Standard Time: Atlantic/Cape_Verde, Europe/Andorra, Asia/Dubai, Asia/Kabul, America/Antigua, America/Anguilla, Europe/Tirane, Asia/Yerevan, America/Curacao, Africa/Luanda, Antarctica/McMurdo, Antarctica/South_Pole, Antarctica/Rothera, Antarctica/Palmer, Antarctica/Mawson, Antarctica/Davis, Antarctica/Casey, Antarctica/Vostok, Antarctica/DumontDUrville, Antarctica/Syowa, America/Argentina/Buenos_Aires, America/Argentina/Cordoba, America/Argentina/Jujuy, America/Argentina/Tucuman, America/Argentina/Catamarca, America/Argentina/La_Rioja, America/Argentina/San_Juan, America/Argentina/Mendoza, America/Argentina/Rio_Gallegos, America/Argentina/Ushuaia, Pacific/Pago_Pago, Europe/Vienna, Australia/Lord_Howe, Australia/Hobart, Australia/Currie, Australia/Melbourne, Australia/Sydney, Australia/Broken_Hill, Australia/Brisbane, Australia/Lindeman, Australia/Adelaide, Australia/Darwin, Australia/Perth, America/Aruba, Europe/Mariehamn, Asia/Baku, Europe/Sarajevo, America/Barbados, Asia/Dhaka, Europe/Brussels, Africa/Ouagadougou, Europe/Sofia, Asia/Bahrain, Africa/Bujumbura, Africa/Porto-Novo, Atlantic/Bermuda, Asia/Brunei, America/La_Paz, America/Noronha, America/Belem, America/Fortaleza, America/Recife, America/Araguaina, America/Maceio, America/Bahia, America/Sao_Paulo, America/Campo_Grande, America/Cuiaba, America/Porto_Velho, America/Boa_Vista, America/Manaus, America/Eirunepe, America/Rio_Branco, America/Nassau, Asia/Thimphu, Africa/Gaborone, Europe/Minsk, America/Belize, America/St_Johns, America/Halifax, America/Glace_Bay, America/Moncton, America/Goose_Bay, America/Blanc-Sablon, America/Montreal, America/Toronto, America/Nipigon, America/Thunder_Bay, America/Pangnirtung, America/Iqaluit, America/Atikokan, America/Rankin_Inlet, America/Winnipeg, America/Rainy_River, America/Cambridge_Bay, America/Regina, America/Swift_Current, America/Edmonton, America/Yellowknife, America/Inuvik, America/Dawson_Creek, America/Vancouver, America/Whitehorse, America/Dawson, Indian/Cocos, Africa/Kinshasa, Africa/Lubumbashi, Africa/Bangui, Africa/Brazzaville, Europe/Zurich, Africa/Abidjan, Pacific/Rarotonga, America/Santiago, Pacific/Easter, Africa/Douala, Asia/Shanghai, Asia/Harbin, Asia/Chongqing, Asia/Urumqi, Asia/Kashgar, America/Bogota, America/Costa_Rica, America/Havana, Atlantic/Cape_Verde, Indian/Christmas, Asia/Nicosia, Europe/Prague, Europe/Berlin, Africa/Djibouti, Europe/Copenhagen, America/Dominica, America/Santo_Domingo, Africa/Algiers, America/Guayaquil, Pacific/Galapagos, Europe/Tallinn, Africa/Cairo, Africa/El_Aaiun, Africa/Asmara, Europe/Madrid, Africa/Ceuta, Atlantic/Canary, Africa/Addis_Ababa, Europe/Helsinki, Pacific/Fiji, Atlantic/Stanley, Pacific/Truk, Pacific/Ponape, Pacific/Kosrae, Atlantic/Faroe, Europe/Paris, Africa/Libreville, Europe/London, America/Grenada, Asia/Tbilisi, America/Cayenne, Europe/Guernsey, Africa/Accra, Europe/Gibraltar, America/Godthab, America/Danmarkshavn, America/Scoresbysund, America/Thule, Africa/Banjul, Africa/Conakry, America/Guadeloupe, Africa/Malabo, Europe/Athens, Atlantic/South_Georgia, America/Guatemala, Pacific/Guam, Africa/Bissau, America/Guyana, Asia/Hong_Kong, America/Tegucigalpa, Europe/Zagreb, America/Port-au-Prince, Europe/Budapest, Asia/Jakarta, Asia/Pontianak, Asia/Makassar, Asia/Jayapura, Europe/Dublin, Asia/Jerusalem, Europe/Isle_of_Man, Asia/Calcutta, Indian/Chagos, Asia/Baghdad, Asia/Tehran, Atlantic/Reykjavik, Europe/Rome, Europe/Jersey, America/Jamaica, Asia/Amman, Asia/Tokyo, Africa/Nairobi, Asia/Bishkek, Asia/Phnom_Penh, Pacific/Tarawa, Pacific/Enderbury, Pacific/Kiritimati, Indian/Comoro, America/St_Kitts, Asia/Pyongyang, Asia/Seoul, Asia/Kuwait, America/Cayman, Asia/Almaty, Asia/Qyzylorda, Asia/Aqtobe, Asia/Aqtau, Asia/Oral, Asia/Vientiane, Asia/Beirut, America/St_Lucia, Europe/Vaduz, Asia/Colombo, Africa/Monrovia, Africa/Maseru, Europe/Vilnius, Europe/Luxembourg, Europe/Riga, Africa/Tripoli, Africa/Casablanca, Europe/Monaco, Europe/Chisinau, Europe/Podgorica, Indian/Antananarivo, Pacific/Majuro, Pacific/Kwajalein, Europe/Skopje, Africa/Bamako, Asia/Rangoon, Asia/Ulaanbaatar, Asia/Hovd, Asia/Choibalsan, Asia/Macau, Pacific/Saipan, America/Martinique, Africa/Nouakchott, America/Montserrat, Europe/Malta, Indian/Mauritius, Indian/Maldives, Africa/Blantyre, America/Mexico_City, America/Cancun, America/Merida, America/Monterrey, America/Mazatlan, America/Chihuahua, America/Hermosillo, America/Tijuana, Asia/Kuala_Lumpur, Asia/Kuching, Africa/Maputo, Africa/Windhoek, Pacific/Noumea, Africa/Niamey, Pacific/Norfolk, Africa/Lagos, America/Managua, Europe/Amsterdam, Europe/Oslo, Asia/Katmandu, Pacific/Nauru, Pacific/Niue, Pacific/Auckland, Pacific/Chatham, Asia/Muscat, America/Panama, America/Lima, Pacific/Tahiti, Pacific/Marquesas, Pacific/Gambier, Pacific/Port_Moresby, Asia/Manila, Asia/Karachi, Europe/Warsaw, America/Miquelon, Pacific/Pitcairn, America/Puerto_Rico, Asia/Gaza, Europe/Lisbon, Atlantic/Madeira, Atlantic/Azores, Pacific/Palau, America/Asuncion, Asia/Qatar, Indian/Reunion, Europe/Bucharest, Europe/Belgrade, Europe/Kaliningrad, Europe/Moscow, Europe/Volgograd, Europe/Samara, Asia/Yekaterinburg, Asia/Omsk, Asia/Novosibirsk, Asia/Krasnoyarsk, Asia/Irkutsk, Asia/Yakutsk, Asia/Vladivostok, Asia/Sakhalin, Asia/Magadan, Asia/Kamchatka, Asia/Anadyr, Africa/Kigali, Asia/Riyadh, Pacific/Guadalcanal, Indian/Mahe, Africa/Khartoum, Europe/Stockholm, Asia/Singapore, Atlantic/St_Helena, Europe/Ljubljana, Arctic/Longyearbyen, Atlantic/Jan_Mayen, Europe/Bratislava, Africa/Freetown, Europe/San_Marino, Africa/Dakar, Africa/Mogadishu, America/Paramaribo, Africa/Sao_Tome, America/El_Salvador, Asia/Damascus, Africa/Mbabane, America/Grand_Turk, Africa/Ndjamena, Indian/Kerguelen, Africa/Lome, Asia/Bangkok, Asia/Dushanbe, Pacific/Fakaofo, Asia/Dili, Asia/Ashgabat, Africa/Tunis, Pacific/Tongatapu, Europe/Istanbul, America/Port_of_Spain, Pacific/Funafuti, Asia/Taipei, Africa/Dar_es_Salaam, Europe/Kiev, Europe/Uzhgorod, Europe/Zaporozhye, Europe/Simferopol, Africa/Kampala, Pacific/Johnston, Pacific/Midway, Pacific/Wake, America/New_York, America/Detroit, America/Kentucky/Louisville, America/Kentucky/Monticello, America/Indiana/Indianapolis, America/Indiana/Marengo, America/Indiana/Knox, America/Indiana/Vevay, America/Chicago, America/Indiana/Vincennes, America/Indiana/Petersburg, America/Menominee, America/North_Dakota/Center, America/North_Dakota/New_Salem, America/Denver, America/Boise, America/Shiprock, America/Phoenix, America/Los_Angeles, America/Anchorage, America/Juneau, America/Yakutat, America/Nome, America/Adak, Pacific/Honolulu, America/Montevideo, Asia/Samarkand, Asia/Tashkent, Europe/Vatican, America/St_Vincent, America/Caracas, America/Tortola, America/St_Thomas, Asia/Saigon, Pacific/Efate, Pacific/Wallis, Pacific/Apia, Asia/Aden, Indian/Mayotte, Africa/Johannesburg, Africa/Lusaka, Africa/Harare, Australia/Eucla, America/Indiana/Tell_City, America/Indiana/Winamac, America/Resolute, America/Marigot, Asia/Kolkata, Asia/Ho_Chi_Minh, America/St_Barthelemy, America/Argentina/San_Luis, America/Santarem, America/Argentina/Salta, Asia/Kathmandu, America/Ojinaga, America/Santa_Isabel, Asia/Novokuznetsk, America/Matamoros, Antarctica/Macquarie, America/Bahia_Banderas, Pacific/Pohnpei, Pacific/Chuuk, America/North_Dakota/Beulah, America/Metlakatla, America/Sitka, America/Kralendijk, America/Lower_Princes, Africa/Juba, Asia/Hebron, Europe/Tiraspol, America/Creston, Asia/Khandyga, Europe/Busingen, Asia/Ust-Nerarw
Enumeration
.1.3.6.1.4.1.12740.1.1.1.1.13
eqlGroupLogLevelThis field specifies the loglevel for the group. The log level determines which messages are written to the console. The following levels are supported. The value of this object will be an OR of the values associated with each level. LEVEL VALUE ------- ------- INFO 0x04 WARNING 0x08 ERROR 0x10 FATAL 0x20 DIAG 0x40 AUDIT 0x80 Default value is INFO|WARNING|ERROR|FATAL = 0x04|0x08|0x10|0x20| = 0x3c = 60rw
Integer32
.1.3.6.1.4.1.12740.1.1.1.1.14
eqlGroupDescriptionThis field contains a use supplied description for the group. There is no default.rw
UTFString
.1.3.6.1.4.1.12740.1.1.1.1.15
eqlGroupIscsiNamePrefixThis field specifies the prefix for the iSCSI target names. The default is iqn.2001-04.com.equallogic. This can be overriden on a per volume basis. However the name must conform to the iSCSI Specification.rw
DisplayString
.1.3.6.1.4.1.12740.1.1.1.1.16
eqlGroupDefaultAliasToVolumeNameThis field specifies whether or not to default the iSCSI alias to the name of the volume. This can be overriden on a per volume basis. The default is to set the iSCSI alias to the volume name.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.1.1.17
eqlGroupEmailSrcDomainThis field specifies the SNMP domain name used in the FROM email address in generated email. e.g., everything after @ in foo@equallogic.com .rw
DisplayString
.1.3.6.1.4.1.12740.1.1.1.1.18
eqlGroupNameThis field specifies the Well Known Name for the group. It must be a name which is resolvable by DNS. There is no default for Group Name.rw
DisplayString
.1.3.6.1.4.1.12740.1.1.1.1.19
eqlGroupIpAddrThis field is deprecated and will be unsupported in the next release.rw
IpAddress
.1.3.6.1.4.1.12740.1.1.1.1.20
eqlGroupEnableWebAccessSSLThis field specifies whether or not to allow web access to the group using https. The default is TRUE.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.1.1.21
eqlGroupEnableWebAccessUnsecureThis field specifies whether or not to allow web access to the group using http. The default is TRUE.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.1.1.22
eqlGroupEnableCliAccessSSHThis field specifies whether or not to allow ssh access to the group. The default is TRUE.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.1.1.23
eqlGroupEnableCliAccessUnsecureThis field specifies whether or not to allow telnet access to the group. The default is FALSE.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.1.1.24
eqlGroupEnableEmailNotificationsThis field is used to specify whether to notify administrators on alarms via email. The default is FALSE.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.1.1.25
eqlGroupEnableSNMPTrapsThis field is used to specify whether to notify administrators on alarms via SNMP TRAPS. The default is FALSE.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.1.1.26
eqlGroupEnableSyslogThis field is used to specify whether to notify administrators on alarms via syslog. The default is FALSE.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.1.1.27
eqlGroupEmailPriorityMaskThis field is used to configure the type of events to be sent in email notifications. The following type of events are supported. info(4), warning(8), error(16), fatal(32) More than one type of event can be specified by adding the correspodning values. Ex: To specify warning,error,fatal the value can be set to 8+16+32 = 56. Setting this field to zero results in sending no events using email notification.rw
INTEGER
.1.3.6.1.4.1.12740.1.1.1.1.28
eqlGroupSNMPPriorityMaskThis field is currently not being used.rwdeprecated
INTEGER
.1.3.6.1.4.1.12740.1.1.1.1.29
eqlGroupSysLogPriorityMaskThis field is used to configure the type of events to be sent in syslog notifications. The following type of events are supported. info(4), warning(8), error(16), fatal(32) More than one type of event can be specified by adding the correspodning values. Ex: To specify warning,error,fatal the value can be set to 8+16+32 = 56. Setting this field to zero results in sending no events using syslog notification.rw
INTEGER
.1.3.6.1.4.1.12740.1.1.1.1.30
eqlGroupDefaultSiteThis field specifies the site where the volume resides. Sites are defined on a per array basis. Sites are used to define where primary and secondary copies of volume mirror reside. The default is the default site. This means that the location of the volume is unrestricted.rw
DisplayString
.1.3.6.1.4.1.12740.1.1.1.1.31
eqlGroupPasswd1An octet string containing the password to authenticate members joining the group. If written, it changes the password for the account. If read, it returns a zero-length string.rw
OCTET STRING
.1.3.6.1.4.1.12740.1.1.1.1.32
eqlGroupPasswd2This field is deprecated.
DisplayString
.1.3.6.1.4.1.12740.1.1.1.1.33
eqlGroupRowStatusRowstatusrw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.1.1.34
eqlGroupObjectReuseScrubIf enabled, an object is zeroed out before reuse so that the new entity using the object will not be aware of the old contents of the object. This field is deprecated and is unsupported from 7.0.rodeprecated
Enumeration
.1.3.6.1.4.1.12740.1.1.1.1.35
eqlGroupEnableSSHThis field is deprecated and will be unsupported in the next release.rwdeprecated
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.1.1.36
eqlGroupEnableTelnetThis field is deprecated and will be unsupported in the next release.rwdeprecated
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.1.1.37
eqlGroupEnableFTPThis field specifies whether or not to allow ftp access to the group. The default is TRUE.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.1.1.38
eqlGroupEmailSrcUserNameThis field specifies user portion of the FROM email address used in generated email. e.g., everything before @ in foo@equallogic.com .rw
DisplayString
.1.3.6.1.4.1.12740.1.1.1.1.39
eqlGroupSyslogFacilityThis field specifies the facility code which you would like applied to all eqllog messages that are targeted at syslog.rw
Enumeration
.1.3.6.1.4.1.12740.1.1.1.1.40
eqlGroupEnableCLBThis field specifies whether or not to turn on Connection Load balancer. The default is TRUE.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.1.1.41
eqlGroupEnableVolBalThis field specifies whether or not to turn on volume balancing. The default is TRUE.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.1.1.42
eqlGroupDiscoveryFilterIf set to true, the list of volumes returned during discovery is filtered based on chap configuration in volume ACLs. The default is FALSE.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.1.1.43
eqlGroupEmailSupportContactThis field specifies the customer email address for support to contact in the event of a system failure. Configuring this field will enable each member to send an e-mail to this address and customer support in the event of a critical hardware failure.rw
DisplayString
.1.3.6.1.4.1.12740.1.1.1.1.44
eqlGroupReplicationWindowSizeThis field specifies the receiving window size of the tcp connection established to secondary site during replication data transfer. Minimum value is 72KB.Maximum value is 2048KB.rw
Unsigned32 UNITS "KB"
.1.3.6.1.4.1.12740.1.1.1.1.45
eqlGroupConfigurationFlagsThis field defines the common place holder for group wide configuration flag. The flags must be of type enable(1) or disable(0). and the default value will always be disable(0).rw
Bits
.1.3.6.1.4.1.12740.1.1.1.1.46
eqlGroupISCSIPortalGrpTagA flag used internally by the iSCSI subsystem to determine the upgrade history of this storage group and infer the default iSCSI Target Portal Group ID. This value is changed internally by the group management daemon as members are added or upgraded such that the value is non zero if any group member has been previously configured with firmware prior to 2.3.6ro
Enumeration
.1.3.6.1.4.1.12740.1.1.1.1.47
eqlGroupMaxConcurrentReplicasThis field specifies the maximum number of replications that are transferring data at one time. The minimum value is 1, the maximum value is 16, and the default value is 16.rw
Integer32
.1.3.6.1.4.1.12740.1.1.1.1.48
eqlGroupDefaultThinWarnThe default eqliscsiVolumeThinWarnPercentage value used when creating thin provisoned volumes.rw
Unsigned32
.1.3.6.1.4.1.12740.1.1.1.1.49
eqlGroupDefaultThinMaxGrowThe default eqliscsiVolumeThinMaxGrowPercentage value used when creating thin provisoned volumes.rw
Unsigned32
.1.3.6.1.4.1.12740.1.1.1.1.50
eqlGroupDefaultMgmtGatewayIpAddressTypeThis field is used to indicate the default gateway for the management network. This field contains the address of the local router used to forward network traffic beyond the local management subnet. Gateways are used to connect multiple subnets. There is no default value for this entry.rw
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.4.1.12740.1.1.1.1.51
eqlGroupDefaultMgmtGatewayIpAddressThis field is used to indicate the default gateway for the management network. This field contains the address of the local router used to forward network traffic beyond the local management subnet. Gateways are used to connect multiple subnets. There is no default value for this entry.rw
InetAddress (INET-ADDRESS-MIB)
.1.3.6.1.4.1.12740.1.1.1.1.52
eqlGroupInet6AddrTypeThis field specifies the type of the IPv6 Well Known Address for the group. This is the IPv6 address iSCSI Initiators will used to connect to the group.rw
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.4.1.12740.1.1.1.1.53
eqlGroupInet6AddrThis field specifies the IPv6 Well Known Address for the group. This is the IPv6 address iSCSI Initiators will used to connect to the group. There is no default value for this field.rw
InetAddress (INET-ADDRESS-MIB)
.1.3.6.1.4.1.12740.1.1.1.1.54
eqlGroupInetAddrTypeThis field specifies the type of the IPv4 Well Known Address for the group. This is the IPv4 address iSCSI Initiators will used to connect to the group.rw
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.4.1.12740.1.1.1.1.55
eqlGroupInetAddrThis field specifies the IPv4 Well Known Address for the group. This is the IPv4 address iSCSI Initiators will used to connect to the group. There is no default value for this field.rw
InetAddress (INET-ADDRESS-MIB)
.1.3.6.1.4.1.12740.1.1.1.1.56
eqlGroupSupportSlowSwitchThis field is used to indicate the slow switch support for the group.rw
Enumeration
.1.3.6.1.4.1.12740.1.1.1.1.57
eqlGroupProfileIndexThis field represents the profile identifier.ro
Unsigned32
.1.3.6.1.4.1.12740.1.1.1.1.58
eqlGroupEnableSSHProtocolV1This field specifies whether or not the SSH service should support the V1 Protocol. The default is TRUE.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.1.1.59
eqlGroupEnableStandbyButtonThis field specifies if the standby button on the Pirates/Porfidio enclosures will be enabled/disabled. The default is FALSE.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.1.1.60
eqlGroupLDAPLoginAuthEnableThis field enables LDAP login authentication.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.1.1.61
eqlGroupApplianceDiscoveryrw
Enumeration
.1.3.6.1.4.1.12740.1.1.1.1.62
eqlGroupDefaultDcbVlanIdDefault VLAN ID for DCB control packets on interfaces.rw
Unsigned32
.1.3.6.1.4.1.12740.1.1.1.1.63
eqlGroupThermalShutdownOverrideThis field specifies whether thermal shutdownn override is enabled or disabled.rw
Enumeration
.1.3.6.1.4.1.12740.1.1.1.1.64
eqlGroupEnableLegacyCryptosThis field specifies whether legacy crypto protocols should be enabled or not. This affects what protocols should be supported by applications such as SSH server, HTTPS server, LDAP client, SNMPv3 agent, etc.rw
Enumeration
.1.3.6.1.4.1.12740.1.1.1.1.65
eqlGroupMaxReplSegmentsThis field specifies the maximum number of replica segments of 256K size per volume that are transferring data at one time. The minimum value is 1, the maximum value is 60, and the default value is 60.rw
Integer32
.1.3.6.1.4.1.12740.1.1.1.1.66
eqlGroupEnableVolumeRecoveryThis field specifies whether or not the recoverable volume feature is enabled. The default value is enabled.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.1.1.67
eqlGroupSessionIdleTimeoutThis is the number of minutes a session may remain idle before being logged out for inactivty. The maximum timeout value is 24 hours or 1440 minutes. The minimum value is 1 minute. The default value is 30 minutes.rw
Integer32
.1.3.6.1.4.1.12740.1.1.1.1.68
eqlGroupSessionIdleTimeoutEnableEnable/disable the idle session timeout feature. The default is disabled.rw
Enumeration
.1.3.6.1.4.1.12740.1.1.1.1.69
eqlGroupSessionBannerEnableEnable/disable the session banner feature. The default is disabled.rw
Enumeration
.1.3.6.1.4.1.12740.1.1.1.1.70
eqlGroupDefaultVolSnapshotBorrowEnabledThis field allows the user a way to change the default behavior of snapshot borrowing on new volume creates across the group.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.1.1.71
eqlGroupRecoveryLifeTimeEnableThis field enables or disables the lifetime that a deleted volume can remain in the recovery bin. When enabled, a volume will be permanently deleted after the recovery lifetime in the recovery bin.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.1.1.72
eqlGroupRecoveryLifeTimeThis field defines the amount of time (in seconds) that a deleted volume can remain in the recovery bin before being permanently deleted by the system. The default value (0) is one week.rw
Integer32
.1.3.6.1.4.1.12740.1.1.1.1.73
eqlGroupTimeProtocolThis field specifies the active network time protocol. The value may be ntp(0) or sntp(1) with a default value of ntp(0).rw
INTEGER
.1.3.6.1.4.1.12740.1.1.1.1.74
eqlGroupRecoveryTrimmerFreqThis field defines the frequency (in seconds) that the system will scan for volumes that have been in the recovery bin past their lifetime. The default value is one scan every 24 hours.rw
Integer32
.1.3.6.1.4.1.12740.1.1.1.1.75
eqlGroupUpdateEnableEnable/disable update available checking.rw
Enumeration
.1.3.6.1.4.1.12740.1.1.1.1.76
eqlGroupUpdateLastThe time of last update performed represented as the number of seconds since the epoch.rw
Unsigned32
.1.3.6.1.4.1.12740.1.1.1.1.77
eqlGroupDefaultSectorSizeThis field specifies, in bytes, the default volume sector size for this group.rw
Enumeration
.1.3.6.1.4.1.12740.1.1.1.1.78
eqlGroupCompressionScanFreqThis index is the last assigned index value associated with VVol Volumes.rw
Integer32
.1.3.6.1.4.1.12740.1.1.1.1.80
eqlGroupRunCompressionScanEnable/Disable the snapshot compression scanner.rw
Enumeration
.1.3.6.1.4.1.12740.1.1.1.1.81
eqlGroupMonitorReminderTimestampUTC timestamp when to display the monitoring connection reminder. 0 to display immediately. 0x7fffffff to never display.rw
Unsigned32
.1.3.6.1.4.1.12740.1.1.1.1.82
eqlStorageGroupStatusTableEqualLogic-Dynamic Group Status Table
SEQUENCE OF EqlStorageGroupStatusEntry
.1.3.6.1.4.1.12740.1.1.2
eqlStorageGroupStatusEntryAn entry (row) containing Group status information.
EqlStorageGroupStatusEntry
.1.3.6.1.4.1.12740.1.1.2.1
eqlStorageGroupStatusPoolSpaceThis field specifies the total size of the Storage Pool in MBs.ro
Integer32
.1.3.6.1.4.1.12740.1.1.2.1.1
eqlStorageGroupStatusPoolSpaceUsedThis field specifies the total space reserved for volume data within the Storage Pool in MBs. Note that this value does not include space reserved for snapshots or replication.ro
Integer32
.1.3.6.1.4.1.12740.1.1.2.1.2
eqlStorageGroupStatusTotalMembersOnLineThis field specifies the number of group members which are online.ro
Integer32
.1.3.6.1.4.1.12740.1.1.2.1.3
eqlStorageGroupStatusPoolSpaceReservedThis field specifies the total space reserved for SnapShot data within the Storage Pool in MBs.ro
Integer32
.1.3.6.1.4.1.12740.1.1.2.1.4
eqlStorageGroupStatusReservedSpaceInUseThis field specifies the total reserved space in use by snapshots in the storage pool . This will be equal to sum of eqlMemberSnapStorage for all members.ro
Integer32 UNITS "MB"
.1.3.6.1.4.1.12740.1.1.2.1.5
eqlStorageGroupStatusDateAndTimeThis field specifies the current time in group represented as number of seconds since epoch.rw
Unsigned32
.1.3.6.1.4.1.12740.1.1.2.1.6
eqlStorageGroupStatusSnapshotsInUseThis field specifies the total number of snapshots within the group that currently have active iSCSI connections.ro
Integer32
.1.3.6.1.4.1.12740.1.1.2.1.7
eqlStorageGroupStatusVolumesInUseThis field specifies the total number of snapshotsvolumes within the group that currently have active iSCSI connections.ro
Integer32
.1.3.6.1.4.1.12740.1.1.2.1.8
eqlStorageGroupStatusSnapshotsOnlineThis field specifies the total number of snapshots available for iSCSI connections.ro
Integer32
.1.3.6.1.4.1.12740.1.1.2.1.9
eqlStorageGroupStatusVolumesOnlineThis field specifies the total number of volumes available for iSCSI connections.ro
Integer32
.1.3.6.1.4.1.12740.1.1.2.1.10
eqlStorageGroupStatusSnapshotCountThis field specifies the total number of snapshots in this group.ro
Integer32
.1.3.6.1.4.1.12740.1.1.2.1.11
eqlStorageGroupStatusVolumeCountThis field specifies the total number of volumes in this group.ro
Integer32
.1.3.6.1.4.1.12740.1.1.2.1.12
eqlStorageGroupStatusMemberCountThis field specifies the total number of members in this group irrelevant of current member state.ro
Integer32
.1.3.6.1.4.1.12740.1.1.2.1.13
eqlStorageGroupStatusMembersInUseThis field specifies the total number of online+offline members in this group.ro
Integer32
.1.3.6.1.4.1.12740.1.1.2.1.14
eqlStorageGroupStatusFreeSpaceThis field specifies the total free space of the Storage Pool in Mega Bytes.ro
Integer32 UNITS "MB"
.1.3.6.1.4.1.12740.1.1.2.1.15
eqlStorageGroupStatusPoolSpaceDelegatedThis field specifies the amount of free space of the Storage Pool which has been partitioned for use by external services such as remote replication. This space is reserved and can be controlled by the users of these services. This sum represents total space reserved by all of the entries in the replicant site tablero
Integer32 UNITS "MB"
.1.3.6.1.4.1.12740.1.1.2.1.16
eqlStorageGroupStatusDelegatedUsedSpaceThis field specifies the amount of space used by external services such as remote replication. This sum represents total space used by all of the entries in the replicant site tablero
Integer32 UNITS "MB"
.1.3.6.1.4.1.12740.1.1.2.1.17
eqlStorageGroupStatusReplReserveSpaceThis sum represents total space reserved for all volumes for replication purposes.ro
Unsigned32 UNITS "MB"
.1.3.6.1.4.1.12740.1.1.2.1.18
eqlStorageGroupStatusReplReserveInUseThis sum represents total space in use for all volumes for replication purposes. This value will be equal to sum of eqlMemberReplStorage for all members.ro
Unsigned32 UNITS "MB"
.1.3.6.1.4.1.12740.1.1.2.1.19
eqlStorageGroupStatusVolumeSpaceSubscribedThis field specifies the total subscribed space for all volumes in the group. For a thin provisioned volume, subscribed space is the advertised space. For a regular volume, subscribed space is the volume size. The value of this field will be equal to sum of eqliscsiVolumeSize field in volume mib.ro
Unsigned32 UNITS "MB"
.1.3.6.1.4.1.12740.1.1.2.1.20
eqlStorageGroupStatusVolumeSpaceAllocatedThe value of this object represents the sum of actual materialized pages for all volumes in the group.ro
Unsigned32 UNITS "MB"
.1.3.6.1.4.1.12740.1.1.2.1.21
eqlStorageGroupStatusFailbackSpaceThis field represents the amount of space consumed by fail-back replicasets in this storage group.ro
Unsigned32 UNITS "MB"
.1.3.6.1.4.1.12740.1.1.2.1.22
eqlStorageGroupStatusThinProvFreeSpaceThis field represents the amount of space available for Thin Provisioned Volumes in this storage group.ro
Integer32 UNITS "MB"
.1.3.6.1.4.1.12740.1.1.2.1.23
eqlStorageGroupStatusConnectionCountThis field gives the number of iSCSI connections that are currently connected to volumes in this group.ro
Integer32
.1.3.6.1.4.1.12740.1.1.2.1.24
eqlStorageGroupStatusSnapReserveSpaceFreeThis represents the total space still available for Snapshot usage.ro
Unsigned32 UNITS "MB"
.1.3.6.1.4.1.12740.1.1.2.1.25
eqlStorageGroupStatusReplReserveSpaceFreeThis represents the total space still available for Replica Snapshot usage.ro
Unsigned32 UNITS "MB"
.1.3.6.1.4.1.12740.1.1.2.1.26
eqlStorageGroupStatusGroupIdThis represents an ID uniquely representing a group.ro
OCTET STRING
.1.3.6.1.4.1.12740.1.1.2.1.27
eqlStorageGroupStatusVirtualVolumeCountThis field specifies the total number of volumes in this group, adjusted to remove volumes not typically visible such as synchronous replication standbys.ro
Unsigned32
.1.3.6.1.4.1.12740.1.1.2.1.28
eqlStorageGroupStatusVirtualVolumesOnlineThis field specifies the total number of volumes available for iSCSI connections, excluding synchronous replication standbys.ro
Unsigned32
.1.3.6.1.4.1.12740.1.1.2.1.29
eqlStorageGroupStatusVirtualVolumesInUseThis field specifies the total number of volumes within the group that currently have active iSCSI connections excluding synchronous replication standbys.ro
Unsigned32
.1.3.6.1.4.1.12740.1.1.2.1.30
eqlStorageGroupStatusVirtualVolumeSpaceSubscribedThis field specifies the total subscribed space for all volumes in the group. For a thin provisioned volume, subscribed space is the advertised space. For a regular volume, subscribed space is the volume size. The value of this field will be equal to sum of eqliscsiVolumeSize field in volume mib. This value is adjusted to exclude subscribed space for synchronous replication standby volumes.ro
Unsigned32 UNITS "MB"
.1.3.6.1.4.1.12740.1.1.2.1.31
eqlStorageGroupStatsTotalSpaceBorrowingThis field specifies the total amount of borrowing against other volume's free snapshot reserve and pool free space. This includes snapshots and recoverable volumes.ro
Unsigned32 UNITS "MB"
.1.3.6.1.4.1.12740.1.1.2.1.32
eqlStorageGroupStatusStorageContainerCountThis field specifies the total number of storage containers within the group.ro
Integer32
.1.3.6.1.4.1.12740.1.1.2.1.34
eqlStorageGroupStatusStorageContainerVolumeCountThis field specifies the total number of volume resources that are being consumed within all storage containers.ro
Unsigned32
.1.3.6.1.4.1.12740.1.1.2.1.35
eqlStorageGroupStatusStorageContainerSnapCountThis field specifies the total number of snapshot resources that are being consumed within all storage containers.ro
Unsigned32
.1.3.6.1.4.1.12740.1.1.2.1.36
eqlStorageGroupStatusStorageContainerVolumesOnlineThis field specifies the total number of online volume resources that are being consumed within all storage containers.ro
Integer32
.1.3.6.1.4.1.12740.1.1.2.1.37
eqlStorageGroupStatusStorageContainerSpaceReservedThis field specifies the total amount of storage that is being consumed within all storage containers.ro
Counter64 UNITS "MB"
.1.3.6.1.4.1.12740.1.1.2.1.38
eqlStorageGroupStatusCompressedSpaceUsedThis field specifies the total amount of space in MB that is currently utilized for compressed pages. This is a dynamic value and cannot be set.ro
Counter64 UNITS "MB"
.1.3.6.1.4.1.12740.1.1.2.1.39
eqlStorageGroupStatusVirtualSpaceSizeThis field specifies the total amount of space in MB that would be utilized by compressed pages if there was no compression.ro
Counter64 UNITS "MB"
.1.3.6.1.4.1.12740.1.1.2.1.40
eqlStorageGroupStatusReplicationSnapCountThis field specifies the total number of snapshot resources that are being consumed for replication. This includes inbound replicas, and temporary snapshots used for in-progress outbound replication.ro
Unsigned32
.1.3.6.1.4.1.12740.1.1.2.1.41
eqlStorageGroupStatusStorageContainerVolumesBoundThis field specifies the total number of bound volume across all storage containers.ro
Integer32
.1.3.6.1.4.1.12740.1.1.2.1.42
eqlStorageGroupSiteTableEqualLogic-Persistent Storage Group Site Table
SEQUENCE OF EqlStorageGroupSiteEntry
.1.3.6.1.4.1.12740.1.1.3
eqlStorageGroupSiteEntryAn entry (row) containing storage group site information.
EqlStorageGroupSiteEntry
.1.3.6.1.4.1.12740.1.1.3.1
eqlGroupSiteIndexThis field specifies the unique index used to identify a site.
Integer32
.1.3.6.1.4.1.12740.1.1.3.1.1
eqlGroupSiteNameThis field specifies the name of the site default site for the group.rw
UTFString
.1.3.6.1.4.1.12740.1.1.3.1.2
eqlGroupSiteDescriptionThis field contains a description of the site. For example the phsyical address of the site. There is no default.rw
UTFString
.1.3.6.1.4.1.12740.1.1.3.1.3
eqlGroupSiteContactEmailThis field specifies the email address of the Administrators responsible for this site.rw
DisplayString
.1.3.6.1.4.1.12740.1.1.3.1.4
eqlGroupSiteContactPhoneThis field specifies the phone number of the Administrator responsible for this site.rw
DisplayString
.1.3.6.1.4.1.12740.1.1.3.1.5
eqlGroupSiteContactMobileThis field specifies the cell phone number of the Administrator responsible for this site.rw
DisplayString
.1.3.6.1.4.1.12740.1.1.3.1.6
eqlGroupSiteRowStatusRow statusrw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.3.1.7
eqlStorageGroupDnsServerTableEqualLogic-Persistent Storage Group DNS Server Table TimeoutAll:600
SEQUENCE OF EqlStorageGroupDnsServerEntry
.1.3.6.1.4.1.12740.1.1.4
eqlStorageGroupDnsServerEntryAn entry (row) containing group dns server information.
EqlStorageGroupDnsServerEntry
.1.3.6.1.4.1.12740.1.1.4.1
eqlGroupDnsServerIndexThis field specifies an index that uniquely identifies the DNS server entry.
Integer32
.1.3.6.1.4.1.12740.1.1.4.1.1
eqlGroupDnsServerIpAddressThis field is deprecated and will be unsupported in the next release.rw
IpAddress
.1.3.6.1.4.1.12740.1.1.4.1.2
eqlGroupDnsServerRowStatusrow statusrw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.4.1.3
eqlGroupDnsServerInetAddressTypeThis field contains the IP address type for the DNS server.rw
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.4.1.12740.1.1.4.1.4
eqlGroupDnsServerInetAddressThis field contains the IP address, in network byte order, for the DNS server.rw
InetAddress (INET-ADDRESS-MIB)
.1.3.6.1.4.1.12740.1.1.4.1.5
eqlGroupDnsServerConfigStateThis field denotes the transaction state of the eqlStorageGroupDnsServerTable.rw
Enumeration
.1.3.6.1.4.1.12740.1.1.4.1.6
eqlStorageGroupNtpServerTableEqualLogic-Persistent Storage Group NTP Server Table
SEQUENCE OF EqlStorageGroupNtpServerEntry
.1.3.6.1.4.1.12740.1.1.5
eqlStorageGroupNtpServerEntryAn entry (row) containing group ntp server information.
EqlStorageGroupNtpServerEntry
.1.3.6.1.4.1.12740.1.1.5.1
eqlGroupNtpServerIndexThis field specifies an index that uniquely identifies the NTP server entry.
Integer32
.1.3.6.1.4.1.12740.1.1.5.1.1
eqlGroupNtpServerIpAddressThis field is deprecated and will be unsupported in the next release.rw
IpAddress
.1.3.6.1.4.1.12740.1.1.5.1.2
eqlGroupNtpServerRowStatusrow statusrw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.5.1.3
eqlGroupNtpServerPortThe listening port number of the ntp server.Default value implies well known ntp port number ( 123 ) assigned by the IANA.rw
INTEGER ( 0..65535)
.1.3.6.1.4.1.12740.1.1.5.1.4
eqlGroupNtpServerInetAddressTypeThis field contains the IP address type for the NTP server.rw
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.4.1.12740.1.1.5.1.5
eqlGroupNtpServerInetAddressThis field contains the IP address, in network byte order, for the NTP server.rw
InetAddress (INET-ADDRESS-MIB)
.1.3.6.1.4.1.12740.1.1.5.1.6
eqlStorageGroupChapServerTableEqualLogic-Persistent Storage Group Chap Server Table
SEQUENCE OF EqlStorageGroupChapServerEntry
.1.3.6.1.4.1.12740.1.1.6
eqlStorageGroupChapServerEntryAn entry (row) containing storage group chap server information.
EqlStorageGroupChapServerEntry
.1.3.6.1.4.1.12740.1.1.6.1
eqlGroupChapServerIndexThis field specifies an index that uniquely identifies the CHAP server entry.
Integer32
.1.3.6.1.4.1.12740.1.1.6.1.1
eqlGroupChapServerIpAddressThis field is deprecated and will be unsupported in the next release.rw
IpAddress
.1.3.6.1.4.1.12740.1.1.6.1.2
eqlGroupChapServerRowStatusrow statusrw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.6.1.3
eqlGroupChapServerPortThe listening port number of chap server at the specified ipaddress. The default value of zero implies that the authentication request will be forwarded to the default radius port(port number 1812). The value of this object is irrelevant if eqlGroupChapServerInetAddress is the loopback ipaddress.rw
INTEGER
.1.3.6.1.4.1.12740.1.1.6.1.4
eqlGroupChapServerRADIUSSecretThis field contains the RADIUS secret for this client. It can be set but it returns a zero-length string upon read.rw
OCTET STRING
.1.3.6.1.4.1.12740.1.1.6.1.5
eqlGroupChapServerInetAddressTypeThis field contains the IP address type for the CHAP server.rw
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.4.1.12740.1.1.6.1.6
eqlGroupChapServerInetAddressThis field contains the IP address, in network byte order, for the CHAP server.rw
InetAddress (INET-ADDRESS-MIB)
.1.3.6.1.4.1.12740.1.1.6.1.7
eqlStorageGroupSMTPServerTableEqualLogic-Persistent Storage Group SMTP Server Table
SEQUENCE OF EqlStorageGroupSMTPServerEntry
.1.3.6.1.4.1.12740.1.1.7
eqlStorageGroupSMTPServerEntryAn entry (row) containing group smtp sever information.
EqlStorageGroupSMTPServerEntry
.1.3.6.1.4.1.12740.1.1.7.1
eqlGroupSMTPServerIndexThis field specifies an index that uniquely identifies the SMTP server entry.
Integer32
.1.3.6.1.4.1.12740.1.1.7.1.1
eqlGroupSMTPServerIpAddressThis field is deprecated and will be unsupported in the next release.rw
IpAddress
.1.3.6.1.4.1.12740.1.1.7.1.2
eqlGroupSMTPServerRowStatusrow statusrw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.7.1.3
eqlGroupSMTPServerPortThe listening port number of the SMTP server. The default value of zero implies that the server is listening on wellknown port number ( 25 ) for SMTP asssigned by the IANA.rw
INTEGER
.1.3.6.1.4.1.12740.1.1.7.1.4
eqlGroupSMTPServerInetAddressTypeThis field contains the IP address type for the SMTP server.rw
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.4.1.12740.1.1.7.1.5
eqlGroupSMTPServerInetAddressThis field contains the IP address, in network byte order, for the SMTP server.rw
InetAddress (INET-ADDRESS-MIB)
.1.3.6.1.4.1.12740.1.1.7.1.6
eqlStorageGroupSysLogServerTableEqualLogic-Persistent Storage Group SysLog Server Table
SEQUENCE OF EqlStorageGroupSysLogServerEntry
.1.3.6.1.4.1.12740.1.1.8
eqlStorageGroupSysLogServerEntryAn entry (row) containing group syslog server info.
EqlStorageGroupSysLogServerEntry
.1.3.6.1.4.1.12740.1.1.8.1
eqlGroupSysLogServerIndexThis field specifies an index that uniquely identifies the syslog server entry.
Integer32
.1.3.6.1.4.1.12740.1.1.8.1.1
eqlGroupSysLogServerIpAddressThis field is deprecated and will be unsupported in the next release.rw
IpAddress
.1.3.6.1.4.1.12740.1.1.8.1.2
eqlGroupSysLogServerRowStatusrow statusrw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.8.1.3
eqlGroupSysLogServerInetAddressTypeThis field contains the IP address type for the syslog server.rw
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.4.1.12740.1.1.8.1.4
eqlGroupSysLogServerInetAddressThis field contains the IP address, in network byte order, for the syslog server.rw
InetAddress (INET-ADDRESS-MIB)
.1.3.6.1.4.1.12740.1.1.8.1.5
eqlStorageGroupAlertEmailTableEqualLogic-Persistent Storage Group Email Alert Table
SEQUENCE OF EqlStorageGroupAlertEmailEntry
.1.3.6.1.4.1.12740.1.1.9
eqlStorageGroupAlertEmailEntryAn entry (row) containing group alert email info.
EqlStorageGroupAlertEmailEntry
.1.3.6.1.4.1.12740.1.1.9.1
eqlGroupAlertEmailIndexThis field specifies an index that uniquely identifies the email user to alert.
Integer32
.1.3.6.1.4.1.12740.1.1.9.1.1
eqlGroupAlertEmailAddressThis field specifies the email address of the Adminstrator targeted to recieve the email the email alerts.rw
DisplayString
.1.3.6.1.4.1.12740.1.1.9.1.2
eqlGroupAlertEmailRowStatusrow statusrw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.9.1.3
eqlStorageGroupAdminAccountTableEqualLogic-Persistent Storage Group Administration account table. This table contains a collection of administration account records. It is indexed by group id and administration account record index.
SEQUENCE OF EqlStorageGroupAdminAccountEntry
.1.3.6.1.4.1.12740.1.1.10
eqlStorageGroupAdminAccountEntryAn entry (row) containing administration account settings.
EqlStorageGroupAdminAccountEntry
.1.3.6.1.4.1.12740.1.1.10.1
eqlStorageGroupAdminAccountIndexThe index value that uniquely identifies the administration account record.
Integer32
.1.3.6.1.4.1.12740.1.1.10.1.1
eqlStorageGroupAdminAccountRowStatusThis value is used to manage the conceptual row.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.10.1.2
eqlStorageGroupAdminAccountNameEQL-SECONDARY-KEY The name of the administration account. This name must be used for user authentication.rw
DisplayString
.1.3.6.1.4.1.12740.1.1.10.1.3
eqlStorageGroupAdminAccountPasswordAn octet string containing the (crypt cipher) password for this account. If written, it changes the password for the account. If read, it returns a zero-length string.rw
OCTET STRING
.1.3.6.1.4.1.12740.1.1.10.1.4
eqlStorageGroupAdminAccountDescriptionThis field contains a description of the administration account.rw
UTFString
.1.3.6.1.4.1.12740.1.1.10.1.5
eqlStorageGroupAdminAccountTypeThis field specifies the type of account. The read-write account type allows the user to modify any group settings. The read-only account allows only read-only access to group configuration data. The default is read-write. Changing this value will come into affect only for new login of the user. Currently logged in sessions will not be affected.rw
AdminAccountType
.1.3.6.1.4.1.12740.1.1.10.1.6
eqlStorageGroupAdminAccountContactThis field contains the full name of the owner of this administration account.rw
DisplayString
.1.3.6.1.4.1.12740.1.1.10.1.7
eqlStorageGroupAdminAccountEmailThis field specifies the email address of the owner of this administration account.rw
DisplayString
.1.3.6.1.4.1.12740.1.1.10.1.8
eqlStorageGroupAdminAccountPhoneThis field specifies the phone number of the owner of this administration account.rw
DisplayString
.1.3.6.1.4.1.12740.1.1.10.1.9
eqlStorageGroupAdminAccountMobileThis field specifies the cell phone number of the owner of this administration account.rw
DisplayString
.1.3.6.1.4.1.12740.1.1.10.1.10
eqlStorageGroupAdminAccountStatusThis field represents the administration status of the account. Disabling the account will prevent the user from logging into CLI and GUI. Currently logged-in sessions will not be affected.rw
Enumeration
.1.3.6.1.4.1.12740.1.1.10.1.11
eqlStorageGroupAdminAccountCliFlagsThis field specifies the set of configuration flags used by the CLI. These flags allow the administrator to save CLI configuration settings between the CLI sessions. The meaning of individual bits is not defined yet. TBDrw
Integer32
.1.3.6.1.4.1.12740.1.1.10.1.12
eqlStorageGroupAdminAccountGuiFlagsThis field specifies the set of configuration flags used by the GUI. These flags allow the administrator to save GUI configuration settings between the GUI sessions. The meaning of individual bits is not defined yet. TBDrw
Integer32
.1.3.6.1.4.1.12740.1.1.10.1.13
eqlStorageGroupAdminAccountPollIntervalThe value of this field specifies how often the group configuration data must be repolled by the GUI. This value is expressed in seconds. The minimum is 5 seconds; the maximum is 1 hour. The default is 30 seconds.rw
Integer32
.1.3.6.1.4.1.12740.1.1.10.1.14
eqlStorageGroupAdminAccountAuthTypeThis field represents the type of authentication for the administrator. Note that RADIUS/LDAP type users will only appear in the table after a successful login.rw
Enumeration
.1.3.6.1.4.1.12740.1.1.10.1.15
eqlStorageGroupAdminAccountRecentLoginThis field represents a timestamp of the most recent time this admin account has logged in. Currently only applies to radius auth type users.ro
Counter32
.1.3.6.1.4.1.12740.1.1.10.1.16
eqlStorageGroupAdminAccountClassThis field contains the contents of the class attribute received in the RADIUS Access-Request and must be reflected in the RADIUS Accounting-Request if accounting is enabled.ro
DisplayString
.1.3.6.1.4.1.12740.1.1.10.1.17
eqlStorageGroupAdminAccountPrivilegeThis field specifies the privilege level of the account. The default is global-admin. global-admin grants full access to the administrator. pool-admin designates the administrator to have access only to one or more pools, and does not have access to global and group-level administrator. volume-admin designates the administrator to have access to specific volumes within specific storage pools.rw
AdminAccountPrivilegeType
.1.3.6.1.4.1.12740.1.1.10.1.18
eqlStorageGroupAdminAccountSnmpKeyThis field contain part of the SNMP key for this account.rw
OCTET STRING
.1.3.6.1.4.1.12740.1.1.10.1.19
eqlStorageGroupAdminAccountSnmpKey2This field contain part of the SNMP second key for this account.rw
OCTET STRING
.1.3.6.1.4.1.12740.1.1.10.1.20
eqlStorageGroupAdminAccountCHAPPasswordAn octet string containing the (cleartext) password for this account. If written, it changes the password for the account. If read, it returns a zero-length string.rw
OCTET STRING
.1.3.6.1.4.1.12740.1.1.10.1.21
eqlStorageGroupAdminAccountKeyA value to uniquely identify this account. The MIB attribute eqliscsiVolumeAdminAccountKey uses this value to associate a volume with an account. No two accounts can have the same value.ro
Unsigned32
.1.3.6.1.4.1.12740.1.1.10.1.22
eqlStorageGroupAdminAccountAdGroupNameThe name of the Active Directory group, valid only when auth type is LDAP. Same as cn attribute of the AD group.rw
DisplayString
.1.3.6.1.4.1.12740.1.1.10.1.23
eqlStorageGroupAdminAccountSNMPPrivProtAn enum field used by the Agent to determine which privacy protocol is used to encrypt external SNMP messages for this user.rw
Enumeration
.1.3.6.1.4.1.12740.1.1.10.1.24
eqlStorageGroupiSNSServerTableEqualLogic-Persistent Storage Group iSNS Server Table
SEQUENCE OF EqlStorageGroupiSNSServerEntry
.1.3.6.1.4.1.12740.1.1.11
eqlStorageGroupiSNSServerEntryAn entry (row) containing group iSNS server information.
EqlStorageGroupiSNSServerEntry
.1.3.6.1.4.1.12740.1.1.11.1
eqlGroupiSNSServerIndexThis field specifies an index that uniquely identifies the iSNS server entry.
Integer32
.1.3.6.1.4.1.12740.1.1.11.1.1
eqlGroupiSNSServerRowStatusUsed to manage conceptual row.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.11.1.2
eqlGroupiSNSServerIpAddressThis field is deprecated and will be unsupported in the next release.rw
IpAddress
.1.3.6.1.4.1.12740.1.1.11.1.3
eqlGroupiSNSServerPortIndicates the port the iSNS server is accepting iSNSP messages on, generally the iSNS well known port.The well known port for iSNSP is 3205. The default value implies to use well known port.rw
INTEGER
.1.3.6.1.4.1.12740.1.1.11.1.4
eqlGroupiSNSServerInetAddressTypeThis field contains the IP address type for the iSNS server.rw
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.4.1.12740.1.1.11.1.5
eqlGroupiSNSServerInetAddressThis field contains the IP address, in network byte order, for the iSNS server.rw
InetAddress (INET-ADDRESS-MIB)
.1.3.6.1.4.1.12740.1.1.11.1.6
eqlGroupCompatibilityTableEqualLogic-Dynamic Group Compatibility Table
SEQUENCE OF EqlGroupCompatibilityEntry
.1.3.6.1.4.1.12740.1.1.12
eqlGroupCompatibilityEntryAn entry (row) containing group compatibility information.
EqlGroupCompatibilityEntry
.1.3.6.1.4.1.12740.1.1.12.1
eqlGroupCurrentCompLevelThis field represents the current compatibility level of the group.ro
Unsigned32
.1.3.6.1.4.1.12740.1.1.12.1.1
eqlStorageGroupCollectionTableEqualLogic-Dynamic Group Collection Table. This table maintains overall number of volume collections and snap collection in a group.
SEQUENCE OF EqlStorageGroupCollectionEntry
.1.3.6.1.4.1.12740.1.1.13
eqlStorageGroupCollectionEntryAn entry (row) containing volume/snap collections information in a group.
EqlStorageGroupCollectionEntry
.1.3.6.1.4.1.12740.1.1.13.1
eqlGrpNoofVolCollectionsThis field specifies the total number of volume collections in the group ie number of rows in eqliscsiVolCollectionTable.ro
Unsigned32
.1.3.6.1.4.1.12740.1.1.13.1.1
eqlGrpNoofSnapCollectionsThis field specifies the total number of snapshot collections in the group ie number of rows in eqliscsiSnapCollectionTable.ro
Unsigned32
.1.3.6.1.4.1.12740.1.1.13.1.2
eqlGrpNoofOrphanSnapCollectionsThis field specifies the total number of snapshot collections in the group that dont have a corresponding volume set ie number of rows in eqliscsiSnapCollectionTable with eqliscsiSnapCollectionVolIndex set to zero.ro
Unsigned32
.1.3.6.1.4.1.12740.1.1.13.1.3
eqlRADIUSTableEqualLogic-Persistent Group RADIUS Configuration Table. This table maintains the configuration for the RADIUS implementation.
SEQUENCE OF EqlRADIUSEntry
.1.3.6.1.4.1.12740.1.1.14
eqlRADIUSEntryAn entry (row) containing RADIUS information in a group.
EqlRADIUSEntry
.1.3.6.1.4.1.12740.1.1.14.1
eqlRADIUSSecretThis field contains the RADIUS secret for this client. It can be set but it returns a zero-length string upon read.rw
OCTET STRING
.1.3.6.1.4.1.12740.1.1.14.1.1
eqlRADIUSLoginAuthEnableThis field enables RADIUS login authentication.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.14.1.2
eqlRADIUSAuthRecvTimeoutThis field configures the RADIUS authentication message receive timeout in seconds.rw
Unsigned32
.1.3.6.1.4.1.12740.1.1.14.1.3
eqlRADIUSAuthMaxRetriesThis field configures the number of RADIUS authentication retries.rw
Unsigned32
.1.3.6.1.4.1.12740.1.1.14.1.4
eqlRADIUSLoginAcctEnableThis field enables RADIUS accounting for login administrators.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.14.1.5
eqlRADIUSAcctRecvTimeoutThis field configures the RADIUS accounting message receive timeout in seconds.rw
Unsigned32
.1.3.6.1.4.1.12740.1.1.14.1.6
eqlRADIUSAcctMaxRetriesThis field configures the number of RADIUS accounting retries.rw
Unsigned32
.1.3.6.1.4.1.12740.1.1.14.1.7
eqlRADIUSiscsiAuthEnableThis field enables RADIUS authentication for ISCSI initiators.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.14.1.8
eqlLocaliscsiAuthEnableThis field enables Local authentication for ISCSI initiators.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.14.1.9
eqlRADIUSRequireAdminAttrEnableThis field enables requiring the EQL-Admin RADIUS return attribute.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.14.1.10
eqlRADIUSAcctServerTableEqualLogic-Persistent Group RADIUS Accounting server table.
SEQUENCE OF EqlRADIUSAcctServerEntry
.1.3.6.1.4.1.12740.1.1.15
eqlRADIUSAcctServerEntryAn entry (row) containing the configuration for a RADIUS accounting server.
EqlRADIUSAcctServerEntry
.1.3.6.1.4.1.12740.1.1.15.1
eqlRADIUSAcctServerIndexThis field specifies an index that uniquely identifies the RADIUS Accounting server entry.
Integer32
.1.3.6.1.4.1.12740.1.1.15.1.1
eqlRADIUSAcctServerIpAddressThis field is deprecated and will be unsupported in the next release.rw
IpAddress
.1.3.6.1.4.1.12740.1.1.15.1.2
eqlRADIUSAcctServerPortThe listening port number of the RADIUS Accounting server at the specified ipaddress. The default value of zero implies that the accounting request will be forwarded to the default RADIUS Accounting port(port number 1813).rw
INTEGER
.1.3.6.1.4.1.12740.1.1.15.1.3
eqlRADIUSAcctServerRowStatusrow statusrw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.15.1.4
eqlRADIUSAcctServerSecretThis field contains the RADIUS secret for this client. It can be set but it returns a zero-length string upon read.rw
OCTET STRING
.1.3.6.1.4.1.12740.1.1.15.1.5
eqlRADIUSAcctServerInetAddressTypeThis field contains the IP address type for the RADIUS Accounting server.rw
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.4.1.12740.1.1.15.1.6
eqlRADIUSAcctServerInetAddressThis field contains the IP address, in network byte order, for the RADIUS Accounting server.rw
InetAddress (INET-ADDRESS-MIB)
.1.3.6.1.4.1.12740.1.1.15.1.7
eqlUserSessionTableEqualLogic-Dynamic user session table.
SEQUENCE OF EqlUserSessionEntry
.1.3.6.1.4.1.12740.1.1.16
eqlUserSessionEntryAn entry (row) containing an active user administrative session.
EqlUserSessionEntry
.1.3.6.1.4.1.12740.1.1.16.1
eqlUserSessionIndexThis field specifies an index that uniquely identifies the user session entry.
Unsigned32
.1.3.6.1.4.1.12740.1.1.16.1.1
eqlUserSessionAdminAccountIndexThis field specifies an index that uniquely identifies a storage group admin account entry.rw
Integer32
.1.3.6.1.4.1.12740.1.1.16.1.2
eqlUserSessionStartThe timestamp from the start of the administrative session.rw
Counter32
.1.3.6.1.4.1.12740.1.1.16.1.3
eqlUserSessionProtocolThe incoming protocol through which the administrator is connecting to the array.rw
Enumeration
.1.3.6.1.4.1.12740.1.1.16.1.4
eqlUserSessionRemoteAddressThis field is deprecated and will be unsupported in the next release.rw
IpAddress
.1.3.6.1.4.1.12740.1.1.16.1.5
eqlUserSessionLocalAddressThis field is deprecated and will be unsupported in the next release.rw
IpAddress
.1.3.6.1.4.1.12740.1.1.16.1.6
eqlUserSessionRemoteInetAddressTypeThe remote IP address type, if applicable, from which the administrator is connecting.rw
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.4.1.12740.1.1.16.1.7
eqlUserSessionRemoteInetAddressThe remote IP address, if applicable, from which the administrator is connecting.rw
InetAddress (INET-ADDRESS-MIB)
.1.3.6.1.4.1.12740.1.1.16.1.8
eqlUserSessionLocalInetAddressTypeThe local interface IP address type, if applicable, at which the administrator is connecting.rw
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.4.1.12740.1.1.16.1.9
eqlUserSessionLocalInetAddressThe local interface IP address, if applicable, at which the administrator is connecting.rw
InetAddress (INET-ADDRESS-MIB)
.1.3.6.1.4.1.12740.1.1.16.1.10
eqlRecordVersionTableEqualLogic record version table.
SEQUENCE OF EqlRecordVersionEntry
.1.3.6.1.4.1.12740.1.1.17
eqlRecordVersionEntryAn entry (row) containing min and max record version.
EqlRecordVersionEntry
.1.3.6.1.4.1.12740.1.1.17.1
eqlRecordVersionTableTypeThis field identifies a specific MIB table by tableType_t (see tableTypes.h).
Unsigned32
.1.3.6.1.4.1.12740.1.1.17.1.1
eqlRecordVersionMinThis field specifies the lowest REC_HDR::major value found in any record of this table.rw
Unsigned32
.1.3.6.1.4.1.12740.1.1.17.1.2
eqlRecordVersionMaxThis field specifies the current REC_HDR::major value for records of this table.rw
Unsigned32
.1.3.6.1.4.1.12740.1.1.17.1.3
eqlGroupTaskTableEqualLogic-Persistent task table. A row in this table represents a task currently executing in the group.
SEQUENCE OF EqlGroupTaskEntry
.1.3.6.1.4.1.12740.1.1.18
eqlGroupTaskEntryA row in the table represents a task. Any given task will have multiple sub tasks. Each sub task involves executing a management operation. The system will execute each sub task one after another until the task is completed.
EqlGroupTaskEntry
.1.3.6.1.4.1.12740.1.1.18.1
eqlGroupTaskIndexThis field specifies an index that uniquely identifies a task.
Unsigned32
.1.3.6.1.4.1.12740.1.1.18.1.1
eqlGroupTaskRowStatusThis field is used to manage the conceptual row.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.18.1.2
eqlGroupTaskTypeThis field represents the type of the task.rw
Enumeration
.1.3.6.1.4.1.12740.1.1.18.1.3
eqlGroupTaskContextContext associated with the task. For ex: a volume or replicaset.rw
RowPointer (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.18.1.4
eqlGroupTaskNumSubTasksNumber of subtasks in this task.rw
Unsigned32
.1.3.6.1.4.1.12740.1.1.18.1.5
eqlGroupTaskSubTaskInProgressSubtask that is currently in progress for this task.rw
Enumeration
.1.3.6.1.4.1.12740.1.1.18.1.6
eqlGroupTaskSubtaskStatusStatus of currently executing subtask.rw
Unsigned32
.1.3.6.1.4.1.12740.1.1.18.1.7
eqlGroupTaskStatusset to true if user action is required for the task to proceed further.rw
Enumeration
.1.3.6.1.4.1.12740.1.1.18.1.8
eqlGroupTaskUserActionuser action on the task.rw
Enumeration
.1.3.6.1.4.1.12740.1.1.18.1.9
eqlGroupTaskStartTimetime at which this task started represented as number of seconds since epoch.rw
Counter32 UNITS "seconds"
.1.3.6.1.4.1.12740.1.1.18.1.10
eqlGroupTaskReplicationIf set to true, a manual replica will be created when performing replication.rw
Enumeration
.1.3.6.1.4.1.12740.1.1.18.1.11
eqlStorageGroupProfileTableEqualLogic-Persistent Group Profile Table
SEQUENCE OF EqlStorageGroupProfileEntry
.1.3.6.1.4.1.12740.1.1.20
eqlStorageGroupProfileEntryAn entry (row) containing the profile limits and configuration information.
EqlStorageGroupProfileEntry
.1.3.6.1.4.1.12740.1.1.20.1
eqlStorageGroupProfileVersionThis field specifies the current version of the Profile. The most significant 16 bits are the compat level, the least significant 16 bits are the profile version.ro
Unsigned32
.1.3.6.1.4.1.12740.1.1.20.1.1
eqlStorageGroupProfileWeightThis field specifies the current weight of the Profilero
Unsigned32
.1.3.6.1.4.1.12740.1.1.20.1.2
eqlStorageGroupProfileMaxMembersThis field specifies the maximum members that can exist in the group with this profile id.ro
Unsigned32
.1.3.6.1.4.1.12740.1.1.20.1.3
eqlStorageGroupProfileMaxVolumesThis field specifies the maximum number of volumes in group.ro
Unsigned32
.1.3.6.1.4.1.12740.1.1.20.1.4
eqlStorageGroupProfileMaxSnapsPerGroupThis field specifies the maximum number of snaps in group.ro
Unsigned32
.1.3.6.1.4.1.12740.1.1.20.1.5
eqlStorageGroupProfileMaxSnapsPerVolumeThis field specifies the maximum number of snaps per volume.ro
Unsigned32
.1.3.6.1.4.1.12740.1.1.20.1.6
eqlStorageGroupProfileMaxReplicasPerVolumeThis field specifies the maximum number of Replicas per volume.ro
Unsigned32
.1.3.6.1.4.1.12740.1.1.20.1.7
eqlStorageGroupProfileMaxReplVolumesThis field specifies the maximum number of replication volumes in group.ro
Unsigned32
.1.3.6.1.4.1.12740.1.1.20.1.8
eqlStorageGroupProfileMaxConnectionsThis field specifies the maximum number of connections allowed per pool.ro
Unsigned32
.1.3.6.1.4.1.12740.1.1.20.1.9
eqlStorageGroupProfileMaxPartnersThis field specifies the maximum number of partners in group.ro
Unsigned32
.1.3.6.1.4.1.12740.1.1.20.1.10
eqlStorageGroupProfileMaxConnWarningThis field specifies when will warning be issued for connection limit.ro
Unsigned32
.1.3.6.1.4.1.12740.1.1.20.1.11
eqlStorageGroupProfileMaxSyncReplVolumesThis field specifies the maximum number of Sync Repl volumes allowed in the group.ro
Unsigned32
.1.3.6.1.4.1.12740.1.1.20.1.12
eqlStorageGroupAdminAccountKeyTableEqualLogic-Dynamic table converting a eqlStorageGroupAdminAccountKey to a eqlStorageGroupAdminAccountIndex.
SEQUENCE OF EqlStorageGroupAdminAccountKeyEntry
.1.3.6.1.4.1.12740.1.1.21
eqlStorageGroupAdminAccountKeyEntryAn entry (row) containing the value of the account index.
EqlStorageGroupAdminAccountKeyEntry
.1.3.6.1.4.1.12740.1.1.21.1
eqlStorageGroupAdminAccountIndexValueThe index to use to access the group admin account associated with the key specified.ro
INTEGER
.1.3.6.1.4.1.12740.1.1.21.1.1
eqlStorageGroupChapAccountTableEqualLogic-Persistent Storage Group CHAP account table. This table contains a collection of CHAP account records, each containing Equallogic specific CHAP account information. It is indexed by group id and CHAP account record index. There should be a row in this table for every row with index 1.1.X in table ipsAuthCredChapAttributesTable. Also, chapIndex is equal to ipsAuthCredIndex.
SEQUENCE OF EqlStorageGroupChapAccountEntry
.1.3.6.1.4.1.12740.1.1.22
eqlStorageGroupChapAccountEntryAn entry (row) containing administration account settings.
EqlStorageGroupChapAccountEntry
.1.3.6.1.4.1.12740.1.1.22.1
eqlStorageGroupChapAccountIndexThe index value that uniquely identifies the CHAP account record.
Integer32
.1.3.6.1.4.1.12740.1.1.22.1.1
eqlStorageGroupChapAccountRowStatusThis value is used to manage the conceptual row.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.22.1.2
eqlStorageGroupChapAccountAdminAccountKeyA value to uniquely identify this administrative account that created this CHAP account. This value matches the eqlStorageGroupAdminAccountKey of the creating account. If no account exists with a matching account key, then the administrative account that created this CHAP account has been deleted.rw
Unsigned32
.1.3.6.1.4.1.12740.1.1.22.1.3
eqlStorageGroupChapAccountPublicIf true, the name of the associated CHAP account is viewable by all admin accounts. If false, the name of the associated CHAP account is not viewable by volume administrator accounts that did not create the associated CHAP accountrw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.22.1.4
eqlLDAPServerTableEqualLogic-Persistent Group LDAP Accounting server table.
SEQUENCE OF EqlLDAPServerEntry
.1.3.6.1.4.1.12740.1.1.24
eqlLDAPServerEntryAn entry (row) containing the configuration for a LDAP server.
EqlLDAPServerEntry
.1.3.6.1.4.1.12740.1.1.24.1
eqlLDAPServerIndexThis field specifies an index that uniquely identifies the LDAP server entry.
Integer32
.1.3.6.1.4.1.12740.1.1.24.1.1
eqlLDAPServerBaseDNThis field contains the LDAP server BASE DN used for ldapsearch queries.rw
OCTET STRING
.1.3.6.1.4.1.12740.1.1.24.1.2
eqlLDAPServerSecureProtocolThis field represent the security protocol between PS Group and the LDAP server. Default value is none meaning that the user credentials will be sent over the network in plain text.rw
Enumeration
.1.3.6.1.4.1.12740.1.1.24.1.3
eqlLDAPServerInetAddressTypeThis field contains the IP address type for the LDAP Accounting server.rw
InetAddressType (INET-ADDRESS-MIB)
.1.3.6.1.4.1.12740.1.1.24.1.4
eqlLDAPServerInetAddressThis field contains the IP address, in network byte order, for the LDAP Accounting server.rw
InetAddress (INET-ADDRESS-MIB)
.1.3.6.1.4.1.12740.1.1.24.1.5
eqlLDAPServerPortThe listening port number of the LDAP Accounting server at the specified ipaddress. The default value of zero implies that the accounting request will be forwarded to the default LDAP Accounting port (389).rw
INTEGER
.1.3.6.1.4.1.12740.1.1.24.1.6
eqlLDAPServerAnonymousAccessThis field specifies whether an anonymous bind can be done, in which case the bind DN and the bind password are not needed. The default is no anonymous access.rw
TruthValue (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.24.1.7
eqlLDAPServerBindDNThis field contains the LDAP bind DN (username) for this client. It can be set but it returns a zero-length string upon read.rw
OCTET STRING
.1.3.6.1.4.1.12740.1.1.24.1.8
eqlLDAPServerBindPasswordThis field contains the LDAP bind password for this client. It can be set but it returns a zero-length string upon read.rw
OCTET STRING
.1.3.6.1.4.1.12740.1.1.24.1.9
eqlLDAPServerRowStatusrow statusrw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.24.1.10
eqlLdapLoginAccessTableEqualLogic-Persistent Group Active directory group table. Stores the access that an AD group or account receives when logging in through an entry in this table.
SEQUENCE OF EqlLdapLoginAccessEntry
.1.3.6.1.4.1.12740.1.1.25
eqlLdapLoginAccessEntryAn entry (row) containing the configuration for the LDAP object access details.
EqlLdapLoginAccessEntry
.1.3.6.1.4.1.12740.1.1.25.1
eqlLdapLoginAccessNameThe name of the LDAP object access description. For AD groups, it is the same as cn attribute of the AD group. For LDAP accounts, it is the same as the account name. Length allows for terminating null terminating character.rw
DisplayString
.1.3.6.1.4.1.12740.1.1.25.1.1
eqlLdapLoginAccessTypeThis field represents the type of LDAP object that this entry grants access to.rw
Enumeration
.1.3.6.1.4.1.12740.1.1.25.1.2
eqlLdapLoginAccessAccountPrivilegeThis field specifies the privilege level of the account that logs in through this LDAP object access. The default is global-admin. Global-admin grants full access to the administrator. Pool-admin designates the administrator to have access only to one or more pools, and does not have access to global and group-level administrator. Volume-admin designates the administrator to have access to specific volumes within specific storage poolsrw
AdminAccountPrivilegeType
.1.3.6.1.4.1.12740.1.1.25.1.3
eqlLdapLoginAccessAccountTypeThis field specifies the type of account. The read-write account type allows the user to modify any group settings. The read-only account allows only read-only access to group configuration data. The default is read-write. Changing this value will come into affect only for new login of the user. Currently logged in sessions will not be affected. Read-only account is only applicable for group admin accounts/pool-admin accounts. Group-admins with read-only set cannot modify any settings.rw
AdminAccountType
.1.3.6.1.4.1.12740.1.1.25.1.4
eqlLdapLoginAccessRowStatusThis field indicates the status of this entry.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.25.1.5
eqlLdapLoginAccessAdDomainNameThe name of the AD Domain associated with this LDAP object. Length allows for terminating null terminating character.rw
DisplayString
.1.3.6.1.4.1.12740.1.1.25.1.6
eqlStorageGroupDnsSuffixTableEqualLogic-Persistent Storage Group DNS Suffix Table TimeoutAll:600
SEQUENCE OF EqlStorageGroupDnsSuffixEntry
.1.3.6.1.4.1.12740.1.1.26
eqlStorageGroupDnsSuffixEntryAn entry (row) containing group dns suffix information.
EqlStorageGroupDnsSuffixEntry
.1.3.6.1.4.1.12740.1.1.26.1
eqlGroupDnsSuffixIndexThis field specifies an index that uniquely identifies the DNS suffix entry.
Integer32
.1.3.6.1.4.1.12740.1.1.26.1.1
eqlGroupDnsSuffixRowStatusrow statusrw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.26.1.2
eqlGroupDnsSuffixStringThis field contains a suffix string.rw
DisplayString
.1.3.6.1.4.1.12740.1.1.26.1.3
eqlGroupDnsSuffixConfigStateThis field denotes the transaction state of the eqlStorageGroupDnsSuffixTable.rw
Enumeration
.1.3.6.1.4.1.12740.1.1.26.1.4
eqlStorageGroupSnmpTableEqualLogic-Dynamic Storage Group Snmp Table. Used solely to communicate Group Snmp params to the Appliance.
SEQUENCE OF EqlStorageGroupSnmpEntry
.1.3.6.1.4.1.12740.1.1.27
eqlStorageGroupSnmpEntryAn entry (row) containing snmp information.
EqlStorageGroupSnmpEntry
.1.3.6.1.4.1.12740.1.1.27.1
eqlStorageGroupSnmpRowStatusRowstatusrw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.27.1.1
eqlStorageGroupSnmpManagersListSpecifies a list of SNMP managers that can receive SNMP traps. Contains Max of 5 comma separated IP addresses.rw
OCTET STRING
.1.3.6.1.4.1.12740.1.1.27.1.2
eqlStorageGroupSnmpTrapCommunitySpecifies the trap read-only community string.rw
OCTET STRING
.1.3.6.1.4.1.12740.1.1.27.1.3
eqlGroupSessionBannerTableEqualLogic-Persistent Storage Group Session Banner Table
SEQUENCE OF EqlGroupSessionBannerEntry
.1.3.6.1.4.1.12740.1.1.28
eqlGroupSessionBannerEntryAn entry (row) containing session banner information.
EqlGroupSessionBannerEntry
.1.3.6.1.4.1.12740.1.1.28.1
eqlGroupSessionBannerRowStatusRowstatusrw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.28.1.1
eqlGroupSessionBannerTextUp to 1000 bytes of UTF-8 string to display at the beginning of any sessionrw
OCTET STRING
.1.3.6.1.4.1.12740.1.1.28.1.2
eqlGroupSingleSignOnStatusTableEqualLogic-Dynamic Single Sign on status table
SEQUENCE OF EqlGroupSingleSignOnStatusEntry
.1.3.6.1.4.1.12740.1.1.29
eqlGroupSingleSignOnStatusEntryAn entry (row) containing session Single Sign on status information.
EqlGroupSingleSignOnStatusEntry
.1.3.6.1.4.1.12740.1.1.29.1
eqlGroupSingleSignOnStatusThis field specifies the local status for signle sign on as maintained by the PS group It will be set to Ready if an attempt to join the AD server had succeeded with the current group name and current AD domain (as set setup in eqlLDAPServerTable)ro
Enumeration
.1.3.6.1.4.1.12740.1.1.29.1.1
eqlGroupSingleSignOnRegGroupNameThis field specifies the group name that was registered with the AD serverro
DisplayString
.1.3.6.1.4.1.12740.1.1.29.1.2
eqlGroupSingleSignOnKrbRealmThis field contains kerberos relam or the domain name expressed using a dot notation. This field should match the dc part of the BASE DN in the eqlLDAPServerTable.ro
OCTET STRING
.1.3.6.1.4.1.12740.1.1.29.1.3
eqlNextAvailableIndexTableEqualLogic-Dynamic Next Available Index Table This table tracks the next available index for a specified table type.
SEQUENCE OF EqlNextAvailableIndexEntry
.1.3.6.1.4.1.12740.1.1.30
eqlNextAvailableIndexEntryAn entry (row) which tracks an available index for the specified table type.
EqlNextAvailableIndexEntry
.1.3.6.1.4.1.12740.1.1.30.1
eqlNextAvailableIndexTableTypeThis field indicates the table for which this index is maintained (from tableTypes.h).
Unsigned32
.1.3.6.1.4.1.12740.1.1.30.1.1
eqlNextAvailableIndexValueThis field maintains the last db index value used for the specified table.ro
Unsigned32
.1.3.6.1.4.1.12740.1.1.30.1.2
eqlStorageGroupSnmpReadOnlyCommunityTableEqualLogic-Dynamic Storage Group Snmp Read Only Community Table. Used solely to manage the Group SNMP read only community string.
SEQUENCE OF EqlStorageGroupSnmpReadOnlyCommunityEntry
.1.3.6.1.4.1.12740.1.1.31
eqlStorageGroupSnmpReadOnlyCommunityEntryAn entry (row) containing snmp community information.
EqlStorageGroupSnmpReadOnlyCommunityEntry
.1.3.6.1.4.1.12740.1.1.31.1
eqlStorageGroupSnmpReadOnlyCommunitySpecifies SNMP read only community string.rw
DisplayString
.1.3.6.1.4.1.12740.1.1.31.1.1
eqlEULAAcceptInfoTableEqualLogic-Persistent EULA acceptance information table. This table contains a single record that stores information associated with the most recent EULA accepted.
SEQUENCE OF EqlEULAAcceptInfoEntry
.1.3.6.1.4.1.12740.1.1.32
eqlEULAAcceptInfoEntryAn entry (row) containing EULA acceptance information.
EqlEULAAcceptInfoEntry
.1.3.6.1.4.1.12740.1.1.32.1
eqlEULAAcceptInfoFirmwareTypeThe firmware type of the accepted EULA.rw
Enumeration
.1.3.6.1.4.1.12740.1.1.32.1.1
eqlEULAAcceptInfoRowStatusThis value is used to manage the conceptual row.rw
RowStatus (SNMPv2-TC)
.1.3.6.1.4.1.12740.1.1.32.1.2
eqlEULAAcceptInfoAccountNameThe name of the administration account used to accept the EULA.rw
DisplayString
.1.3.6.1.4.1.12740.1.1.32.1.3
eqlEULAAcceptInfoEULAVersionThe version of the accepted EULA.rw
Unsigned32
.1.3.6.1.4.1.12740.1.1.32.1.4
eqlEULAAcceptInfoTimestampThe timestamp when the EULA was accepted..rw
Unsigned32
.1.3.6.1.4.1.12740.1.1.32.1.5
eqlgroupNotifications
OBJECT IDENTIFIER
.1.3.6.1.4.1.12740.1.2
eqlgroupConformance
OBJECT IDENTIFIER
.1.3.6.1.4.1.12740.1.3
EQLGROUP-MIB - SNMP MIB Reference | MIBs Explorer